diff options
Diffstat (limited to '')
| -rw-r--r-- | include/linux/amba/pl080.h | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/include/linux/amba/pl080.h b/include/linux/amba/pl080.h new file mode 100644 index 000000000..ab036b6b1 --- /dev/null +++ b/include/linux/amba/pl080.h @@ -0,0 +1,220 @@ +/* include/linux/amba/pl080.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * ARM PrimeCell PL080 DMA controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Note, there are some Samsung updates to this controller block which + * make it not entierly compatible with the PL080 specification from + * ARM. When in doubt, check the Samsung documentation first. + * + * The Samsung defines are PL080S, and add an extra control register, + * the ability to move more than 2^11 counts of data and some extra + * OneNAND features. +*/ + +#ifndef ASM_PL080_H +#define ASM_PL080_H + +#define PL080_INT_STATUS (0x00) +#define PL080_TC_STATUS (0x04) +#define PL080_TC_CLEAR (0x08) +#define PL080_ERR_STATUS (0x0C) +#define PL080_ERR_CLEAR (0x10) +#define PL080_RAW_TC_STATUS (0x14) +#define PL080_RAW_ERR_STATUS (0x18) +#define PL080_EN_CHAN (0x1c) +#define PL080_SOFT_BREQ (0x20) +#define PL080_SOFT_SREQ (0x24) +#define PL080_SOFT_LBREQ (0x28) +#define PL080_SOFT_LSREQ (0x2C) + +#define PL080_CONFIG (0x30) +#define PL080_CONFIG_M2_BE BIT(2) +#define PL080_CONFIG_M1_BE BIT(1) +#define PL080_CONFIG_ENABLE BIT(0) + +#define PL080_SYNC (0x34) + +/* The Faraday Technology FTDMAC020 variant registers */ +#define FTDMAC020_CH_BUSY (0x20) +/* Identical to PL080_CONFIG */ +#define FTDMAC020_CSR (0x24) +/* Identical to PL080_SYNC */ +#define FTDMAC020_SYNC (0x2C) +#define FTDMAC020_REVISION (0x30) +#define FTDMAC020_FEATURE (0x34) + +/* Per channel configuration registers */ +#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20))) +#define PL080_CH_SRC_ADDR (0x00) +#define PL080_CH_DST_ADDR (0x04) +#define PL080_CH_LLI (0x08) +#define PL080_CH_CONTROL (0x0C) +#define PL080_CH_CONFIG (0x10) +#define PL080S_CH_CONTROL2 (0x10) +#define PL080S_CH_CONFIG (0x14) +/* The Faraday FTDMAC020 derivative shuffles the registers around */ +#define FTDMAC020_CH_CSR (0x00) +#define FTDMAC020_CH_CFG (0x04) +#define FTDMAC020_CH_SRC_ADDR (0x08) +#define FTDMAC020_CH_DST_ADDR (0x0C) +#define FTDMAC020_CH_LLP (0x10) +#define FTDMAC020_CH_SIZE (0x14) + +#define PL080_LLI_ADDR_MASK GENMASK(31, 2) +#define PL080_LLI_ADDR_SHIFT (2) +#define PL080_LLI_LM_AHB2 BIT(0) + +#define PL080_CONTROL_TC_IRQ_EN BIT(31) +#define PL080_CONTROL_PROT_MASK GENMASK(30, 28) +#define PL080_CONTROL_PROT_SHIFT (28) +#define PL080_CONTROL_PROT_CACHE BIT(30) +#define PL080_CONTROL_PROT_BUFF BIT(29) +#define PL080_CONTROL_PROT_SYS BIT(28) +#define PL080_CONTROL_DST_INCR BIT(27) +#define PL080_CONTROL_SRC_INCR BIT(26) +#define PL080_CONTROL_DST_AHB2 BIT(25) +#define PL080_CONTROL_SRC_AHB2 BIT(24) +#define PL080_CONTROL_DWIDTH_MASK GENMASK(23, 21) +#define PL080_CONTROL_DWIDTH_SHIFT (21) +#define PL080_CONTROL_SWIDTH_MASK GENMASK(20, 18) +#define PL080_CONTROL_SWIDTH_SHIFT (18) +#define PL080_CONTROL_DB_SIZE_MASK GENMASK(17, 15) +#define PL080_CONTROL_DB_SIZE_SHIFT (15) +#define PL080_CONTROL_SB_SIZE_MASK GENMASK(14, 12) +#define PL080_CONTROL_SB_SIZE_SHIFT (12) +#define PL080_CONTROL_TRANSFER_SIZE_MASK GENMASK(11, 0) +#define PL080S_CONTROL_TRANSFER_SIZE_MASK GENMASK(24, 0) +#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0) + +#define PL080_BSIZE_1 (0x0) +#define PL080_BSIZE_4 (0x1) +#define PL080_BSIZE_8 (0x2) +#define PL080_BSIZE_16 (0x3) +#define PL080_BSIZE_32 (0x4) +#define PL080_BSIZE_64 (0x5) +#define PL080_BSIZE_128 (0x6) +#define PL080_BSIZE_256 (0x7) + +#define PL080_WIDTH_8BIT (0x0) +#define PL080_WIDTH_16BIT (0x1) +#define PL080_WIDTH_32BIT (0x2) + +#define PL080N_CONFIG_ITPROT BIT(20) +#define PL080N_CONFIG_SECPROT BIT(19) +#define PL080_CONFIG_HALT BIT(18) +#define PL080_CONFIG_ACTIVE BIT(17) /* RO */ +#define PL080_CONFIG_LOCK BIT(16) +#define PL080_CONFIG_TC_IRQ_MASK BIT(15) +#define PL080_CONFIG_ERR_IRQ_MASK BIT(14) +#define PL080_CONFIG_FLOW_CONTROL_MASK GENMASK(13, 11) +#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11) +#define PL080_CONFIG_DST_SEL_MASK GENMASK(9, 6) +#define PL080_CONFIG_DST_SEL_SHIFT (6) +#define PL080_CONFIG_SRC_SEL_MASK GENMASK(4, 1) +#define PL080_CONFIG_SRC_SEL_SHIFT (1) +#define PL080_CONFIG_ENABLE BIT(0) + +#define PL080_FLOW_MEM2MEM (0x0) +#define PL080_FLOW_MEM2PER (0x1) +#define PL080_FLOW_PER2MEM (0x2) +#define PL080_FLOW_SRC2DST (0x3) +#define PL080_FLOW_SRC2DST_DST (0x4) +#define PL080_FLOW_MEM2PER_PER (0x5) +#define PL080_FLOW_PER2MEM_PER (0x6) +#define PL080_FLOW_SRC2DST_SRC (0x7) + +#define FTDMAC020_CH_CSR_TC_MSK BIT(31) +/* Later versions have a threshold in bits 24..26, */ +#define FTDMAC020_CH_CSR_FIFOTH_MSK GENMASK(26, 24) +#define FTDMAC020_CH_CSR_FIFOTH_SHIFT (24) +#define FTDMAC020_CH_CSR_CHPR1_MSK GENMASK(23, 22) +#define FTDMAC020_CH_CSR_PROT3 BIT(21) +#define FTDMAC020_CH_CSR_PROT2 BIT(20) +#define FTDMAC020_CH_CSR_PROT1 BIT(19) +#define FTDMAC020_CH_CSR_SRC_SIZE_MSK GENMASK(18, 16) +#define FTDMAC020_CH_CSR_SRC_SIZE_SHIFT (16) +#define FTDMAC020_CH_CSR_ABT BIT(15) +#define FTDMAC020_CH_CSR_SRC_WIDTH_MSK GENMASK(13, 11) +#define FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT (11) +#define FTDMAC020_CH_CSR_DST_WIDTH_MSK GENMASK(10, 8) +#define FTDMAC020_CH_CSR_DST_WIDTH_SHIFT (8) +#define FTDMAC020_CH_CSR_MODE BIT(7) +/* 00 = increase, 01 = decrease, 10 = fix */ +#define FTDMAC020_CH_CSR_SRCAD_CTL_MSK GENMASK(6, 5) +#define FTDMAC020_CH_CSR_SRCAD_CTL_SHIFT (5) +#define FTDMAC020_CH_CSR_DSTAD_CTL_MSK GENMASK(4, 3) +#define FTDMAC020_CH_CSR_DSTAD_CTL_SHIFT (3) +#define FTDMAC020_CH_CSR_SRC_SEL BIT(2) +#define FTDMAC020_CH_CSR_DST_SEL BIT(1) +#define FTDMAC020_CH_CSR_EN BIT(0) + +/* FIFO threshold setting */ +#define FTDMAC020_CH_CSR_FIFOTH_1 (0x0) +#define FTDMAC020_CH_CSR_FIFOTH_2 (0x1) +#define FTDMAC020_CH_CSR_FIFOTH_4 (0x2) +#define FTDMAC020_CH_CSR_FIFOTH_8 (0x3) +#define FTDMAC020_CH_CSR_FIFOTH_16 (0x4) +/* The FTDMAC020 supports 64bit wide transfers */ +#define FTDMAC020_WIDTH_64BIT (0x3) +/* Address can be increased, decreased or fixed */ +#define FTDMAC020_CH_CSR_SRCAD_CTL_INC (0x0) +#define FTDMAC020_CH_CSR_SRCAD_CTL_DEC (0x1) +#define FTDMAC020_CH_CSR_SRCAD_CTL_FIXED (0x2) + +#define FTDMAC020_CH_CFG_LLP_CNT_MASK GENMASK(19, 16) +#define FTDMAC020_CH_CFG_LLP_CNT_SHIFT (16) +#define FTDMAC020_CH_CFG_BUSY BIT(8) +#define FTDMAC020_CH_CFG_INT_ABT_MASK BIT(2) +#define FTDMAC020_CH_CFG_INT_ERR_MASK BIT(1) +#define FTDMAC020_CH_CFG_INT_TC_MASK BIT(0) + +/* Inside the LLIs, the applicable CSR fields are mapped differently */ +#define FTDMAC020_LLI_TC_MSK BIT(28) +#define FTDMAC020_LLI_SRC_WIDTH_MSK GENMASK(27, 25) +#define FTDMAC020_LLI_SRC_WIDTH_SHIFT (25) +#define FTDMAC020_LLI_DST_WIDTH_MSK GENMASK(24, 22) +#define FTDMAC020_LLI_DST_WIDTH_SHIFT (22) +#define FTDMAC020_LLI_SRCAD_CTL_MSK GENMASK(21, 20) +#define FTDMAC020_LLI_SRCAD_CTL_SHIFT (20) +#define FTDMAC020_LLI_DSTAD_CTL_MSK GENMASK(19, 18) +#define FTDMAC020_LLI_DSTAD_CTL_SHIFT (18) +#define FTDMAC020_LLI_SRC_SEL BIT(17) +#define FTDMAC020_LLI_DST_SEL BIT(16) +#define FTDMAC020_LLI_TRANSFER_SIZE_MASK GENMASK(11, 0) +#define FTDMAC020_LLI_TRANSFER_SIZE_SHIFT (0) + +#define FTDMAC020_CFG_LLP_CNT_MASK GENMASK(19, 16) +#define FTDMAC020_CFG_LLP_CNT_SHIFT (16) +#define FTDMAC020_CFG_BUSY BIT(8) +#define FTDMAC020_CFG_INT_ABT_MSK BIT(2) +#define FTDMAC020_CFG_INT_ERR_MSK BIT(1) +#define FTDMAC020_CFG_INT_TC_MSK BIT(0) + +/* DMA linked list chain structure */ + +struct pl080_lli { + u32 src_addr; + u32 dst_addr; + u32 next_lli; + u32 control0; +}; + +struct pl080s_lli { + u32 src_addr; + u32 dst_addr; + u32 next_lli; + u32 control0; + u32 control1; +}; + +#endif /* ASM_PL080_H */ |