summaryrefslogtreecommitdiffstats
path: root/include/scsi/fc/fc_fc2.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--include/scsi/fc/fc_fc2.h123
1 files changed, 123 insertions, 0 deletions
diff --git a/include/scsi/fc/fc_fc2.h b/include/scsi/fc/fc_fc2.h
new file mode 100644
index 000000000..0b2671431
--- /dev/null
+++ b/include/scsi/fc/fc_fc2.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FC2_H_
+#define _FC_FC2_H_
+
+/*
+ * Fibre Channel Exchanges and Sequences.
+ */
+#ifndef PACKED
+#define PACKED __attribute__ ((__packed__))
+#endif /* PACKED */
+
+
+/*
+ * Sequence Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_ssb {
+ __u8 ssb_seq_id; /* sequence ID */
+ __u8 _ssb_resvd;
+ __be16 ssb_low_seq_cnt; /* lowest SEQ_CNT */
+
+ __be16 ssb_high_seq_cnt; /* highest SEQ_CNT */
+ __be16 ssb_s_stat; /* sequence status flags */
+
+ __be16 ssb_err_seq_cnt; /* error SEQ_CNT */
+ __u8 ssb_fh_cs_ctl; /* frame header CS_CTL */
+ __be16 ssb_fh_ox_id; /* frame header OX_ID */
+ __be16 ssb_rx_id; /* responder's exchange ID */
+ __u8 _ssb_resvd2[2];
+} PACKED;
+
+/*
+ * The SSB should be 17 bytes. Since it's layout is somewhat strange,
+ * we define the size here so that code can ASSERT that the size comes out
+ * correct.
+ */
+#define FC_SSB_SIZE 17 /* length of fc_ssb for assert */
+
+/*
+ * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define SSB_ST_RESP (1 << 15) /* sequence responder */
+#define SSB_ST_ACTIVE (1 << 14) /* sequence is active */
+#define SSB_ST_ABNORMAL (1 << 12) /* abnormal ending condition */
+
+#define SSB_ST_REQ_MASK (3 << 10) /* ACK, abort sequence condition */
+#define SSB_ST_REQ_CONT (0 << 10)
+#define SSB_ST_REQ_ABORT (1 << 10)
+#define SSB_ST_REQ_STOP (2 << 10)
+#define SSB_ST_REQ_RETRANS (3 << 10)
+
+#define SSB_ST_ABTS (1 << 9) /* ABTS protocol completed */
+#define SSB_ST_RETRANS (1 << 8) /* retransmission completed */
+#define SSB_ST_TIMEOUT (1 << 7) /* sequence timed out by recipient */
+#define SSB_ST_P_RJT (1 << 6) /* P_RJT transmitted */
+
+#define SSB_ST_CLASS_BIT 4 /* class of service field LSB */
+#define SSB_ST_CLASS_MASK 3 /* class of service mask */
+#define SSB_ST_ACK (1 << 3) /* ACK (EOFt or EOFdt) transmitted */
+
+/*
+ * Exchange Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_esb {
+ __u8 esb_cs_ctl; /* CS_CTL for frame header */
+ __be16 esb_ox_id; /* originator exchange ID */
+ __be16 esb_rx_id; /* responder exchange ID */
+ __be32 esb_orig_fid; /* fabric ID of originator */
+ __be32 esb_resp_fid; /* fabric ID of responder */
+ __be32 esb_e_stat; /* status */
+ __u8 _esb_resvd[4];
+ __u8 esb_service_params[112]; /* TBD */
+ __u8 esb_seq_status[8]; /* sequence statuses, 8 bytes each */
+} __attribute__((packed));
+
+/*
+ * Define expected size for ASSERTs.
+ * See comments on FC_SSB_SIZE.
+ */
+#define FC_ESB_SIZE (1 + 5*4 + 112 + 8) /* expected size */
+
+/*
+ * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define ESB_ST_RESP (1 << 31) /* responder to exchange */
+#define ESB_ST_SEQ_INIT (1 << 30) /* port holds sequence initiative */
+#define ESB_ST_COMPLETE (1 << 29) /* exchange is complete */
+#define ESB_ST_ABNORMAL (1 << 28) /* abnormal ending condition */
+#define ESB_ST_REC_QUAL (1 << 26) /* recovery qualifier active */
+
+#define ESB_ST_ERRP_BIT 24 /* LSB for error policy */
+#define ESB_ST_ERRP_MASK (3 << 24) /* mask for error policy */
+#define ESB_ST_ERRP_MULT (0 << 24) /* abort, discard multiple sequences */
+#define ESB_ST_ERRP_SING (1 << 24) /* abort, discard single sequence */
+#define ESB_ST_ERRP_INF (2 << 24) /* process with infinite buffers */
+#define ESB_ST_ERRP_IMM (3 << 24) /* discard mult. with immed. retran. */
+
+#define ESB_ST_OX_ID_INVL (1 << 23) /* originator XID invalid */
+#define ESB_ST_RX_ID_INVL (1 << 22) /* responder XID invalid */
+#define ESB_ST_PRI_INUSE (1 << 21) /* priority / preemption in use */
+
+#endif /* _FC_FC2_H_ */