diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/pci/ca0106/ca0106.h | 742 |
1 files changed, 742 insertions, 0 deletions
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h new file mode 100644 index 000000000..9847b669c --- /dev/null +++ b/sound/pci/ca0106/ca0106.h @@ -0,0 +1,742 @@ +/* + * Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk> + * Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit + * Version: 0.0.22 + * + * FEATURES currently supported: + * See ca0106_main.c for features. + * + * Changelog: + * Support interrupts per period. + * Removed noise from Center/LFE channel when in Analog mode. + * Rename and remove mixer controls. + * 0.0.6 + * Use separate card based DMA buffer for periods table list. + * 0.0.7 + * Change remove and rename ctrls into lists. + * 0.0.8 + * Try to fix capture sources. + * 0.0.9 + * Fix AC3 output. + * Enable S32_LE format support. + * 0.0.10 + * Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".) + * 0.0.11 + * Add Model name recognition. + * 0.0.12 + * Correct interrupt timing. interrupt at end of period, instead of in the middle of a playback period. + * Remove redundent "voice" handling. + * 0.0.13 + * Single trigger call for multi channels. + * 0.0.14 + * Set limits based on what the sound card hardware can do. + * playback periods_min=2, periods_max=8 + * capture hw constraints require period_size = n * 64 bytes. + * playback hw constraints require period_size = n * 64 bytes. + * 0.0.15 + * Separated ca0106.c into separate functional .c files. + * 0.0.16 + * Implement 192000 sample rate. + * 0.0.17 + * Add support for SB0410 and SB0413. + * 0.0.18 + * Modified Copyright message. + * 0.0.19 + * Added I2C and SPI registers. Filled in interrupt enable. + * 0.0.20 + * Added GPIO info for SB Live 24bit. + * 0.0.21 + * Implement support for Line-in capture on SB Live 24bit. + * 0.0.22 + * Add support for mute control on SB Live 24bit (cards w/ SPI DAC) + * + * + * This code was initially based on code from ALSA's emu10k1x.c which is: + * Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/************************************************************************************************/ +/* PCI function 0 registers, address = <val> + PCIBASE0 */ +/************************************************************************************************/ + +#define PTR 0x00 /* Indexed register set pointer register */ + /* NOTE: The CHANNELNUM and ADDRESS words can */ + /* be modified independently of each other. */ + /* CNL[1:0], ADDR[27:16] */ + +#define DATA 0x04 /* Indexed register set data register */ + /* DATA[31:0] */ + +#define IPR 0x08 /* Global interrupt pending register */ + /* Clear pending interrupts by writing a 1 to */ + /* the relevant bits and zero to the other bits */ +#define IPR_MIDI_RX_B 0x00020000 /* MIDI UART-B Receive buffer non-empty */ +#define IPR_MIDI_TX_B 0x00010000 /* MIDI UART-B Transmit buffer empty */ +#define IPR_SPDIF_IN_USER 0x00004000 /* SPDIF input user data has 16 more bits */ +#define IPR_SPDIF_OUT_USER 0x00002000 /* SPDIF output user data needs 16 more bits */ +#define IPR_SPDIF_OUT_FRAME 0x00001000 /* SPDIF frame about to start */ +#define IPR_SPI 0x00000800 /* SPI transaction completed */ +#define IPR_I2C_EEPROM 0x00000400 /* I2C EEPROM transaction completed */ +#define IPR_I2C_DAC 0x00000200 /* I2C DAC transaction completed */ +#define IPR_AI 0x00000100 /* Audio pending register changed. See PTR reg 0x76 */ +#define IPR_GPI 0x00000080 /* General Purpose input changed */ +#define IPR_SRC_LOCKED 0x00000040 /* SRC lock status changed */ +#define IPR_SPDIF_STATUS 0x00000020 /* SPDIF status changed */ +#define IPR_TIMER2 0x00000010 /* 192000Hz Timer */ +#define IPR_TIMER1 0x00000008 /* 44100Hz Timer */ +#define IPR_MIDI_RX_A 0x00000004 /* MIDI UART-A Receive buffer non-empty */ +#define IPR_MIDI_TX_A 0x00000002 /* MIDI UART-A Transmit buffer empty */ +#define IPR_PCI 0x00000001 /* PCI Bus error */ + +#define INTE 0x0c /* Interrupt enable register */ + +#define INTE_MIDI_RX_B 0x00020000 /* MIDI UART-B Receive buffer non-empty */ +#define INTE_MIDI_TX_B 0x00010000 /* MIDI UART-B Transmit buffer empty */ +#define INTE_SPDIF_IN_USER 0x00004000 /* SPDIF input user data has 16 more bits */ +#define INTE_SPDIF_OUT_USER 0x00002000 /* SPDIF output user data needs 16 more bits */ +#define INTE_SPDIF_OUT_FRAME 0x00001000 /* SPDIF frame about to start */ +#define INTE_SPI 0x00000800 /* SPI transaction completed */ +#define INTE_I2C_EEPROM 0x00000400 /* I2C EEPROM transaction completed */ +#define INTE_I2C_DAC 0x00000200 /* I2C DAC transaction completed */ +#define INTE_AI 0x00000100 /* Audio pending register changed. See PTR reg 0x75 */ +#define INTE_GPI 0x00000080 /* General Purpose input changed */ +#define INTE_SRC_LOCKED 0x00000040 /* SRC lock status changed */ +#define INTE_SPDIF_STATUS 0x00000020 /* SPDIF status changed */ +#define INTE_TIMER2 0x00000010 /* 192000Hz Timer */ +#define INTE_TIMER1 0x00000008 /* 44100Hz Timer */ +#define INTE_MIDI_RX_A 0x00000004 /* MIDI UART-A Receive buffer non-empty */ +#define INTE_MIDI_TX_A 0x00000002 /* MIDI UART-A Transmit buffer empty */ +#define INTE_PCI 0x00000001 /* PCI Bus error */ + +#define UNKNOWN10 0x10 /* Unknown ??. Defaults to 0 */ +#define HCFG 0x14 /* Hardware config register */ + /* 0x1000 causes AC3 to fails. It adds a dither bit. */ + +#define HCFG_STAC 0x10000000 /* Special mode for STAC9460 Codec. */ +#define HCFG_CAPTURE_I2S_BYPASS 0x08000000 /* 1 = bypass I2S input async SRC. */ +#define HCFG_CAPTURE_SPDIF_BYPASS 0x04000000 /* 1 = bypass SPDIF input async SRC. */ +#define HCFG_PLAYBACK_I2S_BYPASS 0x02000000 /* 0 = I2S IN mixer output, 1 = I2S IN1. */ +#define HCFG_FORCE_LOCK 0x01000000 /* For test only. Force input SRC tracker to lock. */ +#define HCFG_PLAYBACK_ATTENUATION 0x00006000 /* Playback attenuation mask. 0 = 0dB, 1 = 6dB, 2 = 12dB, 3 = Mute. */ +#define HCFG_PLAYBACK_DITHER 0x00001000 /* 1 = Add dither bit to all playback channels. */ +#define HCFG_PLAYBACK_S32_LE 0x00000800 /* 1 = S32_LE, 0 = S16_LE */ +#define HCFG_CAPTURE_S32_LE 0x00000400 /* 1 = S32_LE, 0 = S16_LE (S32_LE current not working) */ +#define HCFG_8_CHANNEL_PLAY 0x00000200 /* 1 = 8 channels, 0 = 2 channels per substream.*/ +#define HCFG_8_CHANNEL_CAPTURE 0x00000100 /* 1 = 8 channels, 0 = 2 channels per substream.*/ +#define HCFG_MONO 0x00000080 /* 1 = I2S Input mono */ +#define HCFG_I2S_OUTPUT 0x00000010 /* 1 = I2S Output disabled */ +#define HCFG_AC97 0x00000008 /* 0 = AC97 1.0, 1 = AC97 2.0 */ +#define HCFG_LOCK_PLAYBACK_CACHE 0x00000004 /* 1 = Cancel bustmaster accesses to soundcache */ + /* NOTE: This should generally never be used. */ +#define HCFG_LOCK_CAPTURE_CACHE 0x00000002 /* 1 = Cancel bustmaster accesses to soundcache */ + /* NOTE: This should generally never be used. */ +#define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */ + /* Should be set to 1 when the EMU10K1 is */ + /* completely initialized. */ +#define GPIO 0x18 /* Defaults: 005f03a3-Analog, 005f02a2-SPDIF. */ + /* Here pins 0,1,2,3,4,,6 are output. 5,7 are input */ + /* For the Audigy LS, pin 0 (or bit 8) controls the SPDIF/Analog jack. */ + /* SB Live 24bit: + * bit 8 0 = SPDIF in and out / 1 = Analog (Mic or Line)-in. + * bit 9 0 = Mute / 1 = Analog out. + * bit 10 0 = Line-in / 1 = Mic-in. + * bit 11 0 = ? / 1 = ? + * bit 12 0 = 48 Khz / 1 = 96 Khz Analog out on SB Live 24bit. + * bit 13 0 = ? / 1 = ? + * bit 14 0 = Mute / 1 = Analog out + * bit 15 0 = ? / 1 = ? + * Both bit 9 and bit 14 have to be set for analog sound to work on the SB Live 24bit. + */ + /* 8 general purpose programmable In/Out pins. + * GPI [8:0] Read only. Default 0. + * GPO [15:8] Default 0x9. (Default to SPDIF jack enabled for SPDIF) + * GPO Enable [23:16] Default 0x0f. Setting a bit to 1, causes the pin to be an output pin. + */ +#define AC97DATA 0x1c /* AC97 register set data register (16 bit) */ + +#define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */ + +/********************************************************************************************************/ +/* CA0106 pointer-offset register set, accessed through the PTR and DATA registers */ +/********************************************************************************************************/ + +/* Initially all registers from 0x00 to 0x3f have zero contents. */ +#define PLAYBACK_LIST_ADDR 0x00 /* Base DMA address of a list of pointers to each period/size */ + /* One list entry: 4 bytes for DMA address, + * 4 bytes for period_size << 16. + * One list entry is 8 bytes long. + * One list entry for each period in the buffer. + */ + /* ADDR[31:0], Default: 0x0 */ +#define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */ + /* SIZE[21:16], Default: 0x8 */ +#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */ + /* PTR[5:0], Default: 0x0 */ +#define PLAYBACK_UNKNOWN3 0x03 /* Not used ?? */ +#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */ + /* DMA[31:0], Default: 0x0 */ +#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */ + /* SIZE[31:16], Default: 0x0 */ +#define PLAYBACK_POINTER 0x06 /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */ + /* POINTER[15:0], Default: 0x0 */ +#define PLAYBACK_PERIOD_END_ADDR 0x07 /* Playback fifo end address */ + /* END_ADDR[15:0], FLAG[16] 0 = don't stop, 1 = stop */ +#define PLAYBACK_FIFO_OFFSET_ADDRESS 0x08 /* Current fifo offset address [21:16] */ + /* Cache size valid [5:0] */ +#define PLAYBACK_UNKNOWN9 0x09 /* 0x9 to 0xf Unused */ +#define CAPTURE_DMA_ADDR 0x10 /* Capture DMA address */ + /* DMA[31:0], Default: 0x0 */ +#define CAPTURE_BUFFER_SIZE 0x11 /* Capture buffer size */ + /* SIZE[31:16], Default: 0x0 */ +#define CAPTURE_POINTER 0x12 /* Capture buffer pointer. Sample currently in ADC */ + /* POINTER[15:0], Default: 0x0 */ +#define CAPTURE_FIFO_OFFSET_ADDRESS 0x13 /* Current fifo offset address [21:16] */ + /* Cache size valid [5:0] */ +#define PLAYBACK_LAST_SAMPLE 0x20 /* The sample currently being played */ +/* 0x21 - 0x3f unused */ +#define BASIC_INTERRUPT 0x40 /* Used by both playback and capture interrupt handler */ + /* Playback (0x1<<channel_id) */ + /* Capture (0x100<<channel_id) */ + /* Playback sample rate 96000 = 0x20000 */ + /* Start Playback [3:0] (one bit per channel) + * Start Capture [11:8] (one bit per channel) + * Playback rate [23:16] (2 bits per channel) (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) + * Playback mixer in enable [27:24] (one bit per channel) + * Playback mixer out enable [31:28] (one bit per channel) + */ +/* The Digital out jack is shared with the Center/LFE Analogue output. + * The jack has 4 poles. I will call 1 - Tip, 2 - Next to 1, 3 - Next to 2, 4 - Next to 3 + * For Analogue: 1 -> Center Speaker, 2 -> Sub Woofer, 3 -> Ground, 4 -> Ground + * For Digital: 1 -> Front SPDIF, 2 -> Rear SPDIF, 3 -> Center/Subwoofer SPDIF, 4 -> Ground. + * Standard 4 pole Video A/V cable with RCA outputs: 1 -> White, 2 -> Yellow, 3 -> Shield on all three, 4 -> Red. + * So, from this you can see that you cannot use a Standard 4 pole Video A/V cable with the SB Audigy LS card. + */ +/* The Front SPDIF PCM gets mixed with samples from the AC97 codec, so can only work for Stereo PCM and not AC3/DTS + * The Rear SPDIF can be used for Stereo PCM and also AC3/DTS + * The Center/LFE SPDIF cannot be used for AC3/DTS, but can be used for Stereo PCM. + * Summary: For ALSA we use the Rear channel for SPDIF Digital AC3/DTS output + */ +/* A standard 2 pole mono mini-jack to RCA plug can be used for SPDIF Stereo PCM output from the Front channel. + * A standard 3 pole stereo mini-jack to 2 RCA plugs can be used for SPDIF AC3/DTS and Stereo PCM output utilising the Rear channel and just one of the RCA plugs. + */ +#define SPCS0 0x41 /* SPDIF output Channel Status 0 register. For Rear. default=0x02108004, non-audio=0x02108006 */ +#define SPCS1 0x42 /* SPDIF output Channel Status 1 register. For Front */ +#define SPCS2 0x43 /* SPDIF output Channel Status 2 register. For Center/LFE */ +#define SPCS3 0x44 /* SPDIF output Channel Status 3 register. Unknown */ + /* When Channel set to 0: */ +#define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */ +#define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */ +#define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */ +#define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */ +#define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */ +#define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */ +#define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */ +#define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */ +#define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */ +#define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */ +#define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */ +#define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */ +#define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */ +#define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */ +#define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */ +#define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */ +#define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */ +#define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */ +#define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */ +#define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */ +#define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */ +#define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */ +#define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */ + + /* When Channel set to 1: */ +#define SPCS_WORD_LENGTH_MASK 0x0000000f /* Word Length Mask */ +#define SPCS_WORD_LENGTH_16 0x00000008 /* Word Length 16 bit */ +#define SPCS_WORD_LENGTH_17 0x00000006 /* Word Length 17 bit */ +#define SPCS_WORD_LENGTH_18 0x00000004 /* Word Length 18 bit */ +#define SPCS_WORD_LENGTH_19 0x00000002 /* Word Length 19 bit */ +#define SPCS_WORD_LENGTH_20A 0x0000000a /* Word Length 20 bit */ +#define SPCS_WORD_LENGTH_20 0x00000009 /* Word Length 20 bit (both 0xa and 0x9 are 20 bit) */ +#define SPCS_WORD_LENGTH_21 0x00000007 /* Word Length 21 bit */ +#define SPCS_WORD_LENGTH_22 0x00000005 /* Word Length 22 bit */ +#define SPCS_WORD_LENGTH_23 0x00000003 /* Word Length 23 bit */ +#define SPCS_WORD_LENGTH_24 0x0000000b /* Word Length 24 bit */ +#define SPCS_ORIGINAL_SAMPLE_RATE_MASK 0x000000f0 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_NONE 0x00000000 /* Original Sample rate not indicated */ +#define SPCS_ORIGINAL_SAMPLE_RATE_16000 0x00000010 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_RES1 0x00000020 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_32000 0x00000030 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_12000 0x00000040 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_11025 0x00000050 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_8000 0x00000060 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_RES2 0x00000070 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_192000 0x00000080 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_24000 0x00000090 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_96000 0x000000a0 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_48000 0x000000b0 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_176400 0x000000c0 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_22050 0x000000d0 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_88200 0x000000e0 /* Original Sample rate */ +#define SPCS_ORIGINAL_SAMPLE_RATE_44100 0x000000f0 /* Original Sample rate */ + +#define SPDIF_SELECT1 0x45 /* Enables SPDIF or Analogue outputs 0-SPDIF, 0xf00-Analogue */ + /* 0x100 - Front, 0x800 - Rear, 0x200 - Center/LFE. + * But as the jack is shared, use 0xf00. + * The Windows2000 driver uses 0x0000000f for both digital and analog. + * 0xf00 introduces interesting noises onto the Center/LFE. + * If you turn the volume up, you hear computer noise, + * e.g. mouse moving, changing between app windows etc. + * So, I am going to set this to 0x0000000f all the time now, + * same as the windows driver does. + * Use register SPDIF_SELECT2(0x72) to switch between SPDIF and Analog. + */ + /* When Channel = 0: + * Wide SPDIF format [3:0] (one bit for each channel) (0=20bit, 1=24bit) + * Tristate SPDIF Output [11:8] (one bit for each channel) (0=Not tristate, 1=Tristate) + * SPDIF Bypass enable [19:16] (one bit for each channel) (0=Not bypass, 1=Bypass) + */ + /* When Channel = 1: + * SPDIF 0 User data [7:0] + * SPDIF 1 User data [15:8] + * SPDIF 0 User data [23:16] + * SPDIF 0 User data [31:24] + * User data can be sent by using the SPDIF output frame pending and SPDIF output user bit interrupts. + */ +#define WATERMARK 0x46 /* Test bit to indicate cache usage level */ +#define SPDIF_INPUT_STATUS 0x49 /* SPDIF Input status register. Bits the same as SPCS. + * When Channel = 0: Bits the same as SPCS channel 0. + * When Channel = 1: Bits the same as SPCS channel 1. + * When Channel = 2: + * SPDIF Input User data [16:0] + * SPDIF Input Frame count [21:16] + */ +#define CAPTURE_CACHE_DATA 0x50 /* 0x50-0x5f Recorded samples. */ +#define CAPTURE_SOURCE 0x60 /* Capture Source 0 = MIC */ +#define CAPTURE_SOURCE_CHANNEL0 0xf0000000 /* Mask for selecting the Capture sources */ +#define CAPTURE_SOURCE_CHANNEL1 0x0f000000 /* 0 - SPDIF mixer output. */ +#define CAPTURE_SOURCE_CHANNEL2 0x00f00000 /* 1 - What you hear or . 2 - ?? */ +#define CAPTURE_SOURCE_CHANNEL3 0x000f0000 /* 3 - Mic in, Line in, TAD in, Aux in. */ +#define CAPTURE_SOURCE_RECORD_MAP 0x0000ffff /* Default 0x00e4 */ + /* Record Map [7:0] (2 bits per channel) 0=mapped to channel 0, 1=mapped to channel 1, 2=mapped to channel2, 3=mapped to channel3 + * Record source select for channel 0 [18:16] + * Record source select for channel 1 [22:20] + * Record source select for channel 2 [26:24] + * Record source select for channel 3 [30:28] + * 0 - SPDIF mixer output. + * 1 - i2s mixer output. + * 2 - SPDIF input. + * 3 - i2s input. + * 4 - AC97 capture. + * 5 - SRC output. + */ +#define CAPTURE_VOLUME1 0x61 /* Capture volume per channel 0-3 */ +#define CAPTURE_VOLUME2 0x62 /* Capture volume per channel 4-7 */ + +#define PLAYBACK_ROUTING1 0x63 /* Playback routing of channels 0-7. Effects AC3 output. Default 0x32765410 */ +#define ROUTING1_REAR 0x77000000 /* Channel_id 0 sends to 10, Channel_id 1 sends to 32 */ +#define ROUTING1_NULL 0x00770000 /* Channel_id 2 sends to 54, Channel_id 3 sends to 76 */ +#define ROUTING1_CENTER_LFE 0x00007700 /* 0x32765410 means, send Channel_id 0 to FRONT, Channel_id 1 to REAR */ +#define ROUTING1_FRONT 0x00000077 /* Channel_id 2 to CENTER_LFE, Channel_id 3 to NULL. */ + /* Channel_id's handle stereo channels. Channel X is a single mono channel */ + /* Host is input from the PCI bus. */ + /* Host channel 0 [2:0] -> SPDIF Mixer/Router channel 0-7. + * Host channel 1 [6:4] -> SPDIF Mixer/Router channel 0-7. + * Host channel 2 [10:8] -> SPDIF Mixer/Router channel 0-7. + * Host channel 3 [14:12] -> SPDIF Mixer/Router channel 0-7. + * Host channel 4 [18:16] -> SPDIF Mixer/Router channel 0-7. + * Host channel 5 [22:20] -> SPDIF Mixer/Router channel 0-7. + * Host channel 6 [26:24] -> SPDIF Mixer/Router channel 0-7. + * Host channel 7 [30:28] -> SPDIF Mixer/Router channel 0-7. + */ + +#define PLAYBACK_ROUTING2 0x64 /* Playback Routing . Feeding Capture channels back into Playback. Effects AC3 output. Default 0x76767676 */ + /* SRC is input from the capture inputs. */ + /* SRC channel 0 [2:0] -> SPDIF Mixer/Router channel 0-7. + * SRC channel 1 [6:4] -> SPDIF Mixer/Router channel 0-7. + * SRC channel 2 [10:8] -> SPDIF Mixer/Router channel 0-7. + * SRC channel 3 [14:12] -> SPDIF Mixer/Router channel 0-7. + * SRC channel 4 [18:16] -> SPDIF Mixer/Router channel 0-7. + * SRC channel 5 [22:20] -> SPDIF Mixer/Router channel 0-7. + * SRC channel 6 [26:24] -> SPDIF Mixer/Router channel 0-7. + * SRC channel 7 [30:28] -> SPDIF Mixer/Router channel 0-7. + */ + +#define PLAYBACK_MUTE 0x65 /* Unknown. While playing 0x0, while silent 0x00fc0000 */ + /* SPDIF Mixer input control: + * Invert SRC to SPDIF Mixer [7-0] (One bit per channel) + * Invert Host to SPDIF Mixer [15:8] (One bit per channel) + * SRC to SPDIF Mixer disable [23:16] (One bit per channel) + * Host to SPDIF Mixer disable [31:24] (One bit per channel) + */ +#define PLAYBACK_VOLUME1 0x66 /* Playback SPDIF volume per channel. Set to the same PLAYBACK_VOLUME(0x6a) */ + /* PLAYBACK_VOLUME1 must be set to 30303030 for SPDIF AC3 Playback */ + /* SPDIF mixer input volume. 0=12dB, 0x30=0dB, 0xFE=-51.5dB, 0xff=Mute */ + /* One register for each of the 4 stereo streams. */ + /* SRC Right volume [7:0] + * SRC Left volume [15:8] + * Host Right volume [23:16] + * Host Left volume [31:24] + */ +#define CAPTURE_ROUTING1 0x67 /* Capture Routing. Default 0x32765410 */ + /* Similar to register 0x63, except that the destination is the I2S mixer instead of the SPDIF mixer. I.E. Outputs to the Analog outputs instead of SPDIF. */ +#define CAPTURE_ROUTING2 0x68 /* Unknown Routing. Default 0x76767676 */ + /* Similar to register 0x64, except that the destination is the I2S mixer instead of the SPDIF mixer. I.E. Outputs to the Analog outputs instead of SPDIF. */ +#define CAPTURE_MUTE 0x69 /* Unknown. While capturing 0x0, while silent 0x00fc0000 */ + /* Similar to register 0x65, except that the destination is the I2S mixer instead of the SPDIF mixer. I.E. Outputs to the Analog outputs instead of SPDIF. */ +#define PLAYBACK_VOLUME2 0x6a /* Playback Analog volume per channel. Does not effect AC3 output */ + /* Similar to register 0x66, except that the destination is the I2S mixer instead of the SPDIF mixer. I.E. Outputs to the Analog outputs instead of SPDIF. */ +#define UNKNOWN6b 0x6b /* Unknown. Readonly. Default 00400000 00400000 00400000 00400000 */ +#define MIDI_UART_A_DATA 0x6c /* Midi Uart A Data */ +#define MIDI_UART_A_CMD 0x6d /* Midi Uart A Command/Status */ +#define MIDI_UART_B_DATA 0x6e /* Midi Uart B Data (currently unused) */ +#define MIDI_UART_B_CMD 0x6f /* Midi Uart B Command/Status (currently unused) */ + +/* unique channel identifier for midi->channel */ + +#define CA0106_MIDI_CHAN_A 0x1 +#define CA0106_MIDI_CHAN_B 0x2 + +/* from mpu401 */ + +#define CA0106_MIDI_INPUT_AVAIL 0x80 +#define CA0106_MIDI_OUTPUT_READY 0x40 +#define CA0106_MPU401_RESET 0xff +#define CA0106_MPU401_ENTER_UART 0x3f +#define CA0106_MPU401_ACK 0xfe + +#define SAMPLE_RATE_TRACKER_STATUS 0x70 /* Readonly. Default 00108000 00108000 00500000 00500000 */ + /* Estimated sample rate [19:0] Relative to 48kHz. 0x8000 = 1.0 + * Rate Locked [20] + * SPDIF Locked [21] For SPDIF channel only. + * Valid Audio [22] For SPDIF channel only. + */ +#define CAPTURE_CONTROL 0x71 /* Some sort of routing. default = 40c81000 30303030 30300000 00700000 */ + /* Channel_id 0: 0x40c81000 must be changed to 0x40c80000 for SPDIF AC3 input or output. */ + /* Channel_id 1: 0xffffffff(mute) 0x30303030(max) controls CAPTURE feedback into PLAYBACK. */ + /* Sample rate output control register Channel=0 + * Sample output rate [1:0] (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) + * Sample input rate [3:2] (0=48kHz, 1=Not available, 2=96kHz, 3=192Khz) + * SRC input source select [4] 0=Audio from digital mixer, 1=Audio from analog source. + * Record rate [9:8] (0=48kHz, 1=Not available, 2=96kHz, 3=192Khz) + * Record mixer output enable [12:10] + * I2S input rate master mode [15:14] (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) + * I2S output rate [17:16] (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) + * I2S output source select [18] (0=Audio from host, 1=Audio from SRC) + * Record mixer I2S enable [20:19] (enable/disable i2sin1 and i2sin0) + * I2S output master clock select [21] (0=256*I2S output rate, 1=512*I2S output rate.) + * I2S input master clock select [22] (0=256*I2S input rate, 1=512*I2S input rate.) + * I2S input mode [23] (0=Slave, 1=Master) + * SPDIF output rate [25:24] (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) + * SPDIF output source select [26] (0=host, 1=SRC) + * Not used [27] + * Record Source 0 input [29:28] (0=SPDIF in, 1=I2S in, 2=AC97 Mic, 3=AC97 PCM) + * Record Source 1 input [31:30] (0=SPDIF in, 1=I2S in, 2=AC97 Mic, 3=AC97 PCM) + */ + /* Sample rate output control register Channel=1 + * I2S Input 0 volume Right [7:0] + * I2S Input 0 volume Left [15:8] + * I2S Input 1 volume Right [23:16] + * I2S Input 1 volume Left [31:24] + */ + /* Sample rate output control register Channel=2 + * SPDIF Input volume Right [23:16] + * SPDIF Input volume Left [31:24] + */ + /* Sample rate output control register Channel=3 + * No used + */ +#define SPDIF_SELECT2 0x72 /* Some sort of routing. Channel_id 0 only. default = 0x0f0f003f. Analog 0x000b0000, Digital 0x0b000000 */ +#define ROUTING2_FRONT_MASK 0x00010000 /* Enable for Front speakers. */ +#define ROUTING2_CENTER_LFE_MASK 0x00020000 /* Enable for Center/LFE speakers. */ +#define ROUTING2_REAR_MASK 0x00080000 /* Enable for Rear speakers. */ + /* Audio output control + * AC97 output enable [5:0] + * I2S output enable [19:16] + * SPDIF output enable [27:24] + */ +#define UNKNOWN73 0x73 /* Unknown. Readonly. Default 0x0 */ +#define CHIP_VERSION 0x74 /* P17 Chip version. Channel_id 0 only. Default 00000071 */ +#define EXTENDED_INT_MASK 0x75 /* Used by both playback and capture interrupt handler */ + /* Sets which Interrupts are enabled. */ + /* 0x00000001 = Half period. Playback. + * 0x00000010 = Full period. Playback. + * 0x00000100 = Half buffer. Playback. + * 0x00001000 = Full buffer. Playback. + * 0x00010000 = Half buffer. Capture. + * 0x00100000 = Full buffer. Capture. + * Capture can only do 2 periods. + * 0x01000000 = End audio. Playback. + * 0x40000000 = Half buffer Playback,Caputre xrun. + * 0x80000000 = Full buffer Playback,Caputre xrun. + */ +#define EXTENDED_INT 0x76 /* Used by both playback and capture interrupt handler */ + /* Shows which interrupts are active at the moment. */ + /* Same bit layout as EXTENDED_INT_MASK */ +#define COUNTER77 0x77 /* Counter range 0 to 0x3fffff, 192000 counts per second. */ +#define COUNTER78 0x78 /* Counter range 0 to 0x3fffff, 44100 counts per second. */ +#define EXTENDED_INT_TIMER 0x79 /* Channel_id 0 only. Used by both playback and capture interrupt handler */ + /* Causes interrupts based on timer intervals. */ +#define SPI 0x7a /* SPI: Serial Interface Register */ +#define I2C_A 0x7b /* I2C Address. 32 bit */ +#define I2C_D0 0x7c /* I2C Data Port 0. 32 bit */ +#define I2C_D1 0x7d /* I2C Data Port 1. 32 bit */ +//I2C values +#define I2C_A_ADC_ADD_MASK 0x000000fe //The address is a 7 bit address +#define I2C_A_ADC_RW_MASK 0x00000001 //bit mask for R/W +#define I2C_A_ADC_TRANS_MASK 0x00000010 //Bit mask for I2c address DAC value +#define I2C_A_ADC_ABORT_MASK 0x00000020 //Bit mask for I2C transaction abort flag +#define I2C_A_ADC_LAST_MASK 0x00000040 //Bit mask for Last word transaction +#define I2C_A_ADC_BYTE_MASK 0x00000080 //Bit mask for Byte Mode + +#define I2C_A_ADC_ADD 0x00000034 //This is the Device address for ADC +#define I2C_A_ADC_READ 0x00000001 //To perform a read operation +#define I2C_A_ADC_START 0x00000100 //Start I2C transaction +#define I2C_A_ADC_ABORT 0x00000200 //I2C transaction abort +#define I2C_A_ADC_LAST 0x00000400 //I2C last transaction +#define I2C_A_ADC_BYTE 0x00000800 //I2C one byte mode + +#define I2C_D_ADC_REG_MASK 0xfe000000 //ADC address register +#define I2C_D_ADC_DAT_MASK 0x01ff0000 //ADC data register + +#define ADC_TIMEOUT 0x00000007 //ADC Timeout Clock Disable +#define ADC_IFC_CTRL 0x0000000b //ADC Interface Control +#define ADC_MASTER 0x0000000c //ADC Master Mode Control +#define ADC_POWER 0x0000000d //ADC PowerDown Control +#define ADC_ATTEN_ADCL 0x0000000e //ADC Attenuation ADCL +#define ADC_ATTEN_ADCR 0x0000000f //ADC Attenuation ADCR +#define ADC_ALC_CTRL1 0x00000010 //ADC ALC Control 1 +#define ADC_ALC_CTRL2 0x00000011 //ADC ALC Control 2 +#define ADC_ALC_CTRL3 0x00000012 //ADC ALC Control 3 +#define ADC_NOISE_CTRL 0x00000013 //ADC Noise Gate Control +#define ADC_LIMIT_CTRL 0x00000014 //ADC Limiter Control +#define ADC_MUX 0x00000015 //ADC Mux offset + +#if 0 +/* FIXME: Not tested yet. */ +#define ADC_GAIN_MASK 0x000000ff //Mask for ADC Gain +#define ADC_ZERODB 0x000000cf //Value to set ADC to 0dB +#define ADC_MUTE_MASK 0x000000c0 //Mask for ADC mute +#define ADC_MUTE 0x000000c0 //Value to mute ADC +#define ADC_OSR 0x00000008 //Mask for ADC oversample rate select +#define ADC_TIMEOUT_DISABLE 0x00000008 //Value and mask to disable Timeout clock +#define ADC_HPF_DISABLE 0x00000100 //Value and mask to disable High pass filter +#define ADC_TRANWIN_MASK 0x00000070 //Mask for Length of Transient Window +#endif + +#define ADC_MUX_MASK 0x0000000f //Mask for ADC Mux +#define ADC_MUX_PHONE 0x00000001 //Value to select TAD at ADC Mux (Not used) +#define ADC_MUX_MIC 0x00000002 //Value to select Mic at ADC Mux +#define ADC_MUX_LINEIN 0x00000004 //Value to select LineIn at ADC Mux +#define ADC_MUX_AUX 0x00000008 //Value to select Aux at ADC Mux + +#define SET_CHANNEL 0 /* Testing channel outputs 0=Front, 1=Center/LFE, 2=Unknown, 3=Rear */ +#define PCM_FRONT_CHANNEL 0 +#define PCM_REAR_CHANNEL 1 +#define PCM_CENTER_LFE_CHANNEL 2 +#define PCM_UNKNOWN_CHANNEL 3 +#define CONTROL_FRONT_CHANNEL 0 +#define CONTROL_REAR_CHANNEL 3 +#define CONTROL_CENTER_LFE_CHANNEL 1 +#define CONTROL_UNKNOWN_CHANNEL 2 + + +/* Based on WM8768 Datasheet Rev 4.2 page 32 */ +#define SPI_REG_MASK 0x1ff /* 16-bit SPI writes have a 7-bit address */ +#define SPI_REG_SHIFT 9 /* followed by 9 bits of data */ + +#define SPI_LDA1_REG 0 /* digital attenuation */ +#define SPI_RDA1_REG 1 +#define SPI_LDA2_REG 4 +#define SPI_RDA2_REG 5 +#define SPI_LDA3_REG 6 +#define SPI_RDA3_REG 7 +#define SPI_LDA4_REG 13 +#define SPI_RDA4_REG 14 +#define SPI_MASTDA_REG 8 + +#define SPI_DA_BIT_UPDATE (1<<8) /* update attenuation values */ +#define SPI_DA_BIT_0dB 0xff /* 0 dB */ +#define SPI_DA_BIT_infdB 0x00 /* inf dB attenuation (mute) */ + +#define SPI_PL_REG 2 +#define SPI_PL_BIT_L_M (0<<5) /* left channel = mute */ +#define SPI_PL_BIT_L_L (1<<5) /* left channel = left */ +#define SPI_PL_BIT_L_R (2<<5) /* left channel = right */ +#define SPI_PL_BIT_L_C (3<<5) /* left channel = (L+R)/2 */ +#define SPI_PL_BIT_R_M (0<<7) /* right channel = mute */ +#define SPI_PL_BIT_R_L (1<<7) /* right channel = left */ +#define SPI_PL_BIT_R_R (2<<7) /* right channel = right */ +#define SPI_PL_BIT_R_C (3<<7) /* right channel = (L+R)/2 */ +#define SPI_IZD_REG 2 +#define SPI_IZD_BIT (0<<4) /* infinite zero detect */ + +#define SPI_FMT_REG 3 +#define SPI_FMT_BIT_RJ (0<<0) /* right justified mode */ +#define SPI_FMT_BIT_LJ (1<<0) /* left justified mode */ +#define SPI_FMT_BIT_I2S (2<<0) /* I2S mode */ +#define SPI_FMT_BIT_DSP (3<<0) /* DSP Modes A or B */ +#define SPI_LRP_REG 3 +#define SPI_LRP_BIT (1<<2) /* invert LRCLK polarity */ +#define SPI_BCP_REG 3 +#define SPI_BCP_BIT (1<<3) /* invert BCLK polarity */ +#define SPI_IWL_REG 3 +#define SPI_IWL_BIT_16 (0<<4) /* 16-bit world length */ +#define SPI_IWL_BIT_20 (1<<4) /* 20-bit world length */ +#define SPI_IWL_BIT_24 (2<<4) /* 24-bit world length */ +#define SPI_IWL_BIT_32 (3<<4) /* 32-bit world length */ + +#define SPI_MS_REG 10 +#define SPI_MS_BIT (1<<5) /* master mode */ +#define SPI_RATE_REG 10 /* only applies in master mode */ +#define SPI_RATE_BIT_128 (0<<6) /* MCLK = LRCLK * 128 */ +#define SPI_RATE_BIT_192 (1<<6) +#define SPI_RATE_BIT_256 (2<<6) +#define SPI_RATE_BIT_384 (3<<6) +#define SPI_RATE_BIT_512 (4<<6) +#define SPI_RATE_BIT_768 (5<<6) + +/* They really do label the bit for the 4th channel "4" and not "3" */ +#define SPI_DMUTE0_REG 9 +#define SPI_DMUTE1_REG 9 +#define SPI_DMUTE2_REG 9 +#define SPI_DMUTE4_REG 15 +#define SPI_DMUTE0_BIT (1<<3) +#define SPI_DMUTE1_BIT (1<<4) +#define SPI_DMUTE2_BIT (1<<5) +#define SPI_DMUTE4_BIT (1<<2) + +#define SPI_PHASE0_REG 3 +#define SPI_PHASE1_REG 3 +#define SPI_PHASE2_REG 3 +#define SPI_PHASE4_REG 15 +#define SPI_PHASE0_BIT (1<<6) +#define SPI_PHASE1_BIT (1<<7) +#define SPI_PHASE2_BIT (1<<8) +#define SPI_PHASE4_BIT (1<<3) + +#define SPI_PDWN_REG 2 /* power down all DACs */ +#define SPI_PDWN_BIT (1<<2) +#define SPI_DACD0_REG 10 /* power down individual DACs */ +#define SPI_DACD1_REG 10 +#define SPI_DACD2_REG 10 +#define SPI_DACD4_REG 15 +#define SPI_DACD0_BIT (1<<1) +#define SPI_DACD1_BIT (1<<2) +#define SPI_DACD2_BIT (1<<3) +#define SPI_DACD4_BIT (1<<0) /* datasheet error says it's 1 */ + +#define SPI_PWRDNALL_REG 10 /* power down everything */ +#define SPI_PWRDNALL_BIT (1<<4) + +#include "ca_midi.h" + +struct snd_ca0106; + +struct snd_ca0106_channel { + struct snd_ca0106 *emu; + int number; + int use; + void (*interrupt)(struct snd_ca0106 *emu, struct snd_ca0106_channel *channel); + struct snd_ca0106_pcm *epcm; +}; + +struct snd_ca0106_pcm { + struct snd_ca0106 *emu; + struct snd_pcm_substream *substream; + int channel_id; + unsigned short running; +}; + +struct snd_ca0106_details { + u32 serial; + char * name; + int ac97; /* ac97 = 0 -> Select MIC, Line in, TAD in, AUX in. + ac97 = 1 -> Default to AC97 in. */ + int gpio_type; /* gpio_type = 1 -> shared mic-in/line-in + gpio_type = 2 -> shared side-out/line-in. */ + int i2c_adc; /* with i2c_adc=1, the driver adds some capture volume + controls, phone, mic, line-in and aux. */ + u16 spi_dac; /* spi_dac = 0 -> no spi interface for DACs + spi_dac = 0x<front><rear><center-lfe><side> + -> specifies DAC id for each channel pair. */ +}; + +// definition of the chip-specific record +struct snd_ca0106 { + struct snd_card *card; + struct snd_ca0106_details *details; + struct pci_dev *pci; + + unsigned long port; + struct resource *res_port; + int irq; + + unsigned int serial; /* serial number */ + unsigned short model; /* subsystem id */ + + spinlock_t emu_lock; + + struct snd_ac97 *ac97; + struct snd_pcm *pcm[4]; + + struct snd_ca0106_channel playback_channels[4]; + struct snd_ca0106_channel capture_channels[4]; + u32 spdif_bits[4]; /* s/pdif out default setup */ + u32 spdif_str_bits[4]; /* s/pdif out per-stream setup */ + int spdif_enable; + int capture_source; + int i2c_capture_source; + u8 i2c_capture_volume[4][2]; + int capture_mic_line_in; + + struct snd_dma_buffer buffer; + + struct snd_ca_midi midi; + struct snd_ca_midi midi2; + + u16 spi_dac_reg[16]; + +#ifdef CONFIG_PM_SLEEP +#define NUM_SAVED_VOLUMES 9 + unsigned int saved_vol[NUM_SAVED_VOLUMES]; +#endif +}; + +int snd_ca0106_mixer(struct snd_ca0106 *emu); +int snd_ca0106_proc_init(struct snd_ca0106 * emu); + +unsigned int snd_ca0106_ptr_read(struct snd_ca0106 * emu, + unsigned int reg, + unsigned int chn); + +void snd_ca0106_ptr_write(struct snd_ca0106 *emu, + unsigned int reg, + unsigned int chn, + unsigned int data); + +int snd_ca0106_i2c_write(struct snd_ca0106 *emu, u32 reg, u32 value); + +int snd_ca0106_spi_write(struct snd_ca0106 * emu, + unsigned int data); + +#ifdef CONFIG_PM_SLEEP +void snd_ca0106_mixer_suspend(struct snd_ca0106 *chip); +void snd_ca0106_mixer_resume(struct snd_ca0106 *chip); +#else +#define snd_ca0106_mixer_suspend(chip) do { } while (0) +#define snd_ca0106_mixer_resume(chip) do { } while (0) +#endif |