diff options
Diffstat (limited to '')
| -rw-r--r-- | tools/arch/mips/include/asm/barrier.h | 21 | ||||
| -rw-r--r-- | tools/arch/mips/include/asm/errno.h | 17 | ||||
| -rw-r--r-- | tools/arch/mips/include/uapi/asm/bitsperlong.h | 9 | ||||
| -rw-r--r-- | tools/arch/mips/include/uapi/asm/errno.h | 130 | ||||
| -rw-r--r-- | tools/arch/mips/include/uapi/asm/kvm.h | 209 | ||||
| -rw-r--r-- | tools/arch/mips/include/uapi/asm/mman.h | 47 |
6 files changed, 433 insertions, 0 deletions
diff --git a/tools/arch/mips/include/asm/barrier.h b/tools/arch/mips/include/asm/barrier.h new file mode 100644 index 000000000..0d1191523 --- /dev/null +++ b/tools/arch/mips/include/asm/barrier.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _TOOLS_LINUX_ASM_MIPS_BARRIER_H +#define _TOOLS_LINUX_ASM_MIPS_BARRIER_H +/* + * FIXME: This came from tools/perf/perf-sys.h, where it was first introduced + * in c1e028ef40b8d6943b767028ba17d4f2ba020edb, more work needed to make it + * more closely follow the Linux kernel arch/mips/include/asm/barrier.h file. + * Probably when we continue work on tools/ Kconfig support to have all the + * CONFIG_ needed for properly doing that. + */ +#define mb() asm volatile( \ + ".set mips2\n\t" \ + "sync\n\t" \ + ".set mips0" \ + : /* no output */ \ + : /* no input */ \ + : "memory") +#define wmb() mb() +#define rmb() mb() + +#endif /* _TOOLS_LINUX_ASM_MIPS_BARRIER_H */ diff --git a/tools/arch/mips/include/asm/errno.h b/tools/arch/mips/include/asm/errno.h new file mode 100644 index 000000000..21d91cdfe --- /dev/null +++ b/tools/arch/mips/include/asm/errno.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle + */ +#ifndef _ASM_ERRNO_H +#define _ASM_ERRNO_H + +#include <uapi/asm/errno.h> + + +/* The biggest error number defined here or in <linux/errno.h>. */ +#define EMAXERRNO 1133 + +#endif /* _ASM_ERRNO_H */ diff --git a/tools/arch/mips/include/uapi/asm/bitsperlong.h b/tools/arch/mips/include/uapi/asm/bitsperlong.h new file mode 100644 index 000000000..7268380d8 --- /dev/null +++ b/tools/arch/mips/include/uapi/asm/bitsperlong.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __ASM_MIPS_BITSPERLONG_H +#define __ASM_MIPS_BITSPERLONG_H + +#define __BITS_PER_LONG _MIPS_SZLONG + +#include <asm-generic/bitsperlong.h> + +#endif /* __ASM_MIPS_BITSPERLONG_H */ diff --git a/tools/arch/mips/include/uapi/asm/errno.h b/tools/arch/mips/include/uapi/asm/errno.h new file mode 100644 index 000000000..2fb714e2d --- /dev/null +++ b/tools/arch/mips/include/uapi/asm/errno.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle + */ +#ifndef _UAPI_ASM_ERRNO_H +#define _UAPI_ASM_ERRNO_H + +/* + * These error numbers are intended to be MIPS ABI compatible + */ + +#include <asm-generic/errno-base.h> + +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define ENOLCK 46 /* No record locks available */ +#define EBADE 50 /* Invalid exchange */ +#define EBADR 51 /* Invalid request descriptor */ +#define EXFULL 52 /* Exchange full */ +#define ENOANO 53 /* No anode */ +#define EBADRQC 54 /* Invalid request code */ +#define EBADSLT 55 /* Invalid slot */ +#define EDEADLOCK 56 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EDOTDOT 73 /* RFS specific error */ +#define EMULTIHOP 74 /* Multihop attempted */ +#define EBADMSG 77 /* Not a data message */ +#define ENAMETOOLONG 78 /* File name too long */ +#define EOVERFLOW 79 /* Value too large for defined data type */ +#define ENOTUNIQ 80 /* Name not unique on network */ +#define EBADFD 81 /* File descriptor in bad state */ +#define EREMCHG 82 /* Remote address changed */ +#define ELIBACC 83 /* Can not access a needed shared library */ +#define ELIBBAD 84 /* Accessing a corrupted shared library */ +#define ELIBSCN 85 /* .lib section in a.out corrupted */ +#define ELIBMAX 86 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 87 /* Cannot exec a shared library directly */ +#define EILSEQ 88 /* Illegal byte sequence */ +#define ENOSYS 89 /* Function not implemented */ +#define ELOOP 90 /* Too many symbolic links encountered */ +#define ERESTART 91 /* Interrupted system call should be restarted */ +#define ESTRPIPE 92 /* Streams pipe error */ +#define ENOTEMPTY 93 /* Directory not empty */ +#define EUSERS 94 /* Too many users */ +#define ENOTSOCK 95 /* Socket operation on non-socket */ +#define EDESTADDRREQ 96 /* Destination address required */ +#define EMSGSIZE 97 /* Message too long */ +#define EPROTOTYPE 98 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 99 /* Protocol not available */ +#define EPROTONOSUPPORT 120 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ +#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 123 /* Protocol family not supported */ +#define EAFNOSUPPORT 124 /* Address family not supported by protocol */ +#define EADDRINUSE 125 /* Address already in use */ +#define EADDRNOTAVAIL 126 /* Cannot assign requested address */ +#define ENETDOWN 127 /* Network is down */ +#define ENETUNREACH 128 /* Network is unreachable */ +#define ENETRESET 129 /* Network dropped connection because of reset */ +#define ECONNABORTED 130 /* Software caused connection abort */ +#define ECONNRESET 131 /* Connection reset by peer */ +#define ENOBUFS 132 /* No buffer space available */ +#define EISCONN 133 /* Transport endpoint is already connected */ +#define ENOTCONN 134 /* Transport endpoint is not connected */ +#define EUCLEAN 135 /* Structure needs cleaning */ +#define ENOTNAM 137 /* Not a XENIX named type file */ +#define ENAVAIL 138 /* No XENIX semaphores available */ +#define EISNAM 139 /* Is a named type file */ +#define EREMOTEIO 140 /* Remote I/O error */ +#define EINIT 141 /* Reserved */ +#define EREMDEV 142 /* Error 142 */ +#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 144 /* Too many references: cannot splice */ +#define ETIMEDOUT 145 /* Connection timed out */ +#define ECONNREFUSED 146 /* Connection refused */ +#define EHOSTDOWN 147 /* Host is down */ +#define EHOSTUNREACH 148 /* No route to host */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EALREADY 149 /* Operation already in progress */ +#define EINPROGRESS 150 /* Operation now in progress */ +#define ESTALE 151 /* Stale file handle */ +#define ECANCELED 158 /* AIO operation canceled */ + +/* + * These error are Linux extensions. + */ +#define ENOMEDIUM 159 /* No medium found */ +#define EMEDIUMTYPE 160 /* Wrong medium type */ +#define ENOKEY 161 /* Required key not available */ +#define EKEYEXPIRED 162 /* Key has expired */ +#define EKEYREVOKED 163 /* Key has been revoked */ +#define EKEYREJECTED 164 /* Key was rejected by service */ + +/* for robust mutexes */ +#define EOWNERDEAD 165 /* Owner died */ +#define ENOTRECOVERABLE 166 /* State not recoverable */ + +#define ERFKILL 167 /* Operation not possible due to RF-kill */ + +#define EHWPOISON 168 /* Memory page has hardware error */ + +#define EDQUOT 1133 /* Quota exceeded */ + + +#endif /* _UAPI_ASM_ERRNO_H */ diff --git a/tools/arch/mips/include/uapi/asm/kvm.h b/tools/arch/mips/include/uapi/asm/kvm.h new file mode 100644 index 000000000..d2714cc1c --- /dev/null +++ b/tools/arch/mips/include/uapi/asm/kvm.h @@ -0,0 +1,209 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Cavium, Inc. + * Authors: Sanjay Lal <sanjayl@kymasys.com> + */ + +#ifndef __LINUX_KVM_MIPS_H +#define __LINUX_KVM_MIPS_H + +#include <linux/types.h> + +/* + * KVM MIPS specific structures and definitions. + * + * Some parts derived from the x86 version of this file. + */ + +/* + * for KVM_GET_REGS and KVM_SET_REGS + * + * If Config[AT] is zero (32-bit CPU), the register contents are + * stored in the lower 32-bits of the struct kvm_regs fields and sign + * extended to 64-bits. + */ +struct kvm_regs { + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 gpr[32]; + __u64 hi; + __u64 lo; + __u64 pc; +}; + +/* + * for KVM_GET_FPU and KVM_SET_FPU + */ +struct kvm_fpu { +}; + + +/* + * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access various + * registers. The id field is broken down as follows: + * + * bits[63..52] - As per linux/kvm.h + * bits[51..32] - Must be zero. + * bits[31..16] - Register set. + * + * Register set = 0: GP registers from kvm_regs (see definitions below). + * + * Register set = 1: CP0 registers. + * bits[15..8] - Must be zero. + * bits[7..3] - Register 'rd' index. + * bits[2..0] - Register 'sel' index. + * + * Register set = 2: KVM specific registers (see definitions below). + * + * Register set = 3: FPU / MSA registers (see definitions below). + * + * Other sets registers may be added in the future. Each set would + * have its own identifier in bits[31..16]. + */ + +#define KVM_REG_MIPS_GP (KVM_REG_MIPS | 0x0000000000000000ULL) +#define KVM_REG_MIPS_CP0 (KVM_REG_MIPS | 0x0000000000010000ULL) +#define KVM_REG_MIPS_KVM (KVM_REG_MIPS | 0x0000000000020000ULL) +#define KVM_REG_MIPS_FPU (KVM_REG_MIPS | 0x0000000000030000ULL) + + +/* + * KVM_REG_MIPS_GP - General purpose registers from kvm_regs. + */ + +#define KVM_REG_MIPS_R0 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 0) +#define KVM_REG_MIPS_R1 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 1) +#define KVM_REG_MIPS_R2 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 2) +#define KVM_REG_MIPS_R3 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 3) +#define KVM_REG_MIPS_R4 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 4) +#define KVM_REG_MIPS_R5 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 5) +#define KVM_REG_MIPS_R6 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 6) +#define KVM_REG_MIPS_R7 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 7) +#define KVM_REG_MIPS_R8 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 8) +#define KVM_REG_MIPS_R9 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 9) +#define KVM_REG_MIPS_R10 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 10) +#define KVM_REG_MIPS_R11 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 11) +#define KVM_REG_MIPS_R12 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 12) +#define KVM_REG_MIPS_R13 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 13) +#define KVM_REG_MIPS_R14 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 14) +#define KVM_REG_MIPS_R15 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 15) +#define KVM_REG_MIPS_R16 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 16) +#define KVM_REG_MIPS_R17 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 17) +#define KVM_REG_MIPS_R18 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 18) +#define KVM_REG_MIPS_R19 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 19) +#define KVM_REG_MIPS_R20 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 20) +#define KVM_REG_MIPS_R21 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 21) +#define KVM_REG_MIPS_R22 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 22) +#define KVM_REG_MIPS_R23 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 23) +#define KVM_REG_MIPS_R24 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 24) +#define KVM_REG_MIPS_R25 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 25) +#define KVM_REG_MIPS_R26 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 26) +#define KVM_REG_MIPS_R27 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 27) +#define KVM_REG_MIPS_R28 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 28) +#define KVM_REG_MIPS_R29 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 29) +#define KVM_REG_MIPS_R30 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 30) +#define KVM_REG_MIPS_R31 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 31) + +#define KVM_REG_MIPS_HI (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 32) +#define KVM_REG_MIPS_LO (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 33) +#define KVM_REG_MIPS_PC (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 34) + + +/* + * KVM_REG_MIPS_KVM - KVM specific control registers. + */ + +/* + * CP0_Count control + * DC: Set 0: Master disable CP0_Count and set COUNT_RESUME to now + * Set 1: Master re-enable CP0_Count with unchanged bias, handling timer + * interrupts since COUNT_RESUME + * This can be used to freeze the timer to get a consistent snapshot of + * the CP0_Count and timer interrupt pending state, while also resuming + * safely without losing time or guest timer interrupts. + * Other: Reserved, do not change. + */ +#define KVM_REG_MIPS_COUNT_CTL (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 0) +#define KVM_REG_MIPS_COUNT_CTL_DC 0x00000001 + +/* + * CP0_Count resume monotonic nanoseconds + * The monotonic nanosecond time of the last set of COUNT_CTL.DC (master + * disable). Any reads and writes of Count related registers while + * COUNT_CTL.DC=1 will appear to occur at this time. When COUNT_CTL.DC is + * cleared again (master enable) any timer interrupts since this time will be + * emulated. + * Modifications to times in the future are rejected. + */ +#define KVM_REG_MIPS_COUNT_RESUME (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 1) +/* + * CP0_Count rate in Hz + * Specifies the rate of the CP0_Count timer in Hz. Modifications occur without + * discontinuities in CP0_Count. + */ +#define KVM_REG_MIPS_COUNT_HZ (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 2) + + +/* + * KVM_REG_MIPS_FPU - Floating Point and MIPS SIMD Architecture (MSA) registers. + * + * bits[15..8] - Register subset (see definitions below). + * bits[7..5] - Must be zero. + * bits[4..0] - Register number within register subset. + */ + +#define KVM_REG_MIPS_FPR (KVM_REG_MIPS_FPU | 0x0000000000000000ULL) +#define KVM_REG_MIPS_FCR (KVM_REG_MIPS_FPU | 0x0000000000000100ULL) +#define KVM_REG_MIPS_MSACR (KVM_REG_MIPS_FPU | 0x0000000000000200ULL) + +/* + * KVM_REG_MIPS_FPR - Floating point / Vector registers. + */ +#define KVM_REG_MIPS_FPR_32(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U32 | (n)) +#define KVM_REG_MIPS_FPR_64(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U64 | (n)) +#define KVM_REG_MIPS_VEC_128(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U128 | (n)) + +/* + * KVM_REG_MIPS_FCR - Floating point control registers. + */ +#define KVM_REG_MIPS_FCR_IR (KVM_REG_MIPS_FCR | KVM_REG_SIZE_U32 | 0) +#define KVM_REG_MIPS_FCR_CSR (KVM_REG_MIPS_FCR | KVM_REG_SIZE_U32 | 31) + +/* + * KVM_REG_MIPS_MSACR - MIPS SIMD Architecture (MSA) control registers. + */ +#define KVM_REG_MIPS_MSA_IR (KVM_REG_MIPS_MSACR | KVM_REG_SIZE_U32 | 0) +#define KVM_REG_MIPS_MSA_CSR (KVM_REG_MIPS_MSACR | KVM_REG_SIZE_U32 | 1) + + +/* + * KVM MIPS specific structures and definitions + * + */ +struct kvm_debug_exit_arch { + __u64 epc; +}; + +/* for KVM_SET_GUEST_DEBUG */ +struct kvm_guest_debug_arch { +}; + +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +/* dummy definition */ +struct kvm_sregs { +}; + +struct kvm_mips_interrupt { + /* in */ + __u32 cpu; + __u32 irq; +}; + +#endif /* __LINUX_KVM_MIPS_H */ diff --git a/tools/arch/mips/include/uapi/asm/mman.h b/tools/arch/mips/include/uapi/asm/mman.h new file mode 100644 index 000000000..de2206883 --- /dev/null +++ b/tools/arch/mips/include/uapi/asm/mman.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef TOOLS_ARCH_MIPS_UAPI_ASM_MMAN_FIX_H +#define TOOLS_ARCH_MIPS_UAPI_ASM_MMAN_FIX_H +#define MADV_DODUMP 17 +#define MADV_DOFORK 11 +#define MADV_DONTDUMP 16 +#define MADV_DONTFORK 10 +#define MADV_DONTNEED 4 +#define MADV_FREE 8 +#define MADV_HUGEPAGE 14 +#define MADV_HWPOISON 100 +#define MADV_MERGEABLE 12 +#define MADV_NOHUGEPAGE 15 +#define MADV_NORMAL 0 +#define MADV_RANDOM 1 +#define MADV_REMOVE 9 +#define MADV_SEQUENTIAL 2 +#define MADV_UNMERGEABLE 13 +#define MADV_WILLNEED 3 +#define MAP_ANONYMOUS 0x0800 +#define MAP_DENYWRITE 0x2000 +#define MAP_EXECUTABLE 0x4000 +#define MAP_FILE 0 +#define MAP_FIXED 0x010 +#define MAP_GROWSDOWN 0x1000 +#define MAP_HUGETLB 0x80000 +#define MAP_LOCKED 0x8000 +#define MAP_NONBLOCK 0x20000 +#define MAP_NORESERVE 0x0400 +#define MAP_POPULATE 0x10000 +#define MAP_PRIVATE 0x002 +#define MAP_SHARED 0x001 +#define MAP_STACK 0x40000 +#define PROT_EXEC 0x04 +#define PROT_GROWSDOWN 0x01000000 +#define PROT_GROWSUP 0x02000000 +#define PROT_NONE 0x00 +#define PROT_READ 0x01 +#define PROT_SEM 0x10 +#define PROT_WRITE 0x02 +/* MADV_SOFT_OFFLINE is undefined on mips, fix it for perf */ +#define MADV_SOFT_OFFLINE 101 +/* MAP_32BIT is undefined on mips, fix it for perf */ +#define MAP_32BIT 0 +/* MAP_UNINITIALIZED is undefined on mips, fix it for perf */ +#define MAP_UNINITIALIZED 0 +#endif |