From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- .../bindings/iio/adc/amlogic,meson-saradc.txt | 37 +++++ .../devicetree/bindings/iio/adc/aspeed_adc.txt | 22 +++ .../bindings/iio/adc/at91-sama5d2_adc.txt | 50 +++++++ .../devicetree/bindings/iio/adc/at91_adc.txt | 83 +++++++++++ .../devicetree/bindings/iio/adc/avia-hx711.txt | 24 ++++ .../devicetree/bindings/iio/adc/axp20x_adc.txt | 48 +++++++ .../devicetree/bindings/iio/adc/berlin2_adc.txt | 19 +++ .../bindings/iio/adc/brcm,iproc-static-adc.txt | 40 ++++++ .../devicetree/bindings/iio/adc/cc10001_adc.txt | 22 +++ .../devicetree/bindings/iio/adc/cpcap-adc.txt | 17 +++ .../devicetree/bindings/iio/adc/da9150-gpadc.txt | 16 +++ .../bindings/iio/adc/envelope-detector.txt | 54 +++++++ .../devicetree/bindings/iio/adc/fsl,imx25-gcq.txt | 57 ++++++++ .../devicetree/bindings/iio/adc/hi8435.txt | 21 +++ .../devicetree/bindings/iio/adc/imx7d-adc.txt | 22 +++ .../devicetree/bindings/iio/adc/lpc1850-adc.txt | 20 +++ .../devicetree/bindings/iio/adc/ltc2497.txt | 13 ++ .../devicetree/bindings/iio/adc/max1027-adc.txt | 20 +++ .../devicetree/bindings/iio/adc/max11100.txt | 18 +++ .../devicetree/bindings/iio/adc/max1118.txt | 21 +++ .../devicetree/bindings/iio/adc/max1363.txt | 63 +++++++++ .../devicetree/bindings/iio/adc/max9611.txt | 27 ++++ .../devicetree/bindings/iio/adc/mcp320x.txt | 57 ++++++++ .../devicetree/bindings/iio/adc/mcp3422.txt | 19 +++ .../devicetree/bindings/iio/adc/mt6577_auxadc.txt | 31 ++++ .../bindings/iio/adc/nuvoton-nau7802.txt | 18 +++ .../devicetree/bindings/iio/adc/palmas-gpadc.txt | 48 +++++++ .../bindings/iio/adc/qcom,pm8xxx-xoadc.txt | 157 +++++++++++++++++++++ .../devicetree/bindings/iio/adc/qcom,spmi-iadc.txt | 46 ++++++ .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 129 +++++++++++++++++ .../bindings/iio/adc/renesas,gyroadc.txt | 98 +++++++++++++ .../bindings/iio/adc/rockchip-saradc.txt | 37 +++++ .../bindings/iio/adc/samsung,exynos-adc.txt | 107 ++++++++++++++ .../bindings/iio/adc/sigma-delta-modulator.txt | 13 ++ .../bindings/iio/adc/sprd,sc27xx-adc.txt | 36 +++++ .../devicetree/bindings/iio/adc/st,stm32-adc.txt | 140 ++++++++++++++++++ .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 135 ++++++++++++++++++ .../devicetree/bindings/iio/adc/ti-adc0832.txt | 19 +++ .../devicetree/bindings/iio/adc/ti-adc084s021.txt | 19 +++ .../devicetree/bindings/iio/adc/ti-adc108s102.txt | 18 +++ .../devicetree/bindings/iio/adc/ti-adc12138.txt | 37 +++++ .../devicetree/bindings/iio/adc/ti-adc128s052.txt | 18 +++ .../devicetree/bindings/iio/adc/ti-adc161s626.txt | 18 +++ .../devicetree/bindings/iio/adc/ti-ads7950.txt | 23 +++ .../devicetree/bindings/iio/adc/ti-ads8688.txt | 20 +++ .../devicetree/bindings/iio/adc/twl4030-madc.txt | 24 ++++ .../devicetree/bindings/iio/adc/vf610-adc.txt | 36 +++++ .../devicetree/bindings/iio/adc/xilinx-xadc.txt | 112 +++++++++++++++ 48 files changed, 2129 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/at91_adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/avia-hx711.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/envelope-detector.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/hi8435.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ltc2497.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/max1027-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/max11100.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/max1118.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/max1363.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/max9611.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/mcp320x.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3422.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/vf610-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt (limited to 'Documentation/devicetree/bindings/iio/adc') diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt new file mode 100644 index 000000000..54b823f3a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt @@ -0,0 +1,37 @@ +* Amlogic Meson SAR (Successive Approximation Register) A/D converter + +Required properties: +- compatible: depending on the SoC this should be one of: + - "amlogic,meson8-saradc" for Meson8 + - "amlogic,meson8b-saradc" for Meson8b + - "amlogic,meson8m2-saradc" for Meson8m2 + - "amlogic,meson-gxbb-saradc" for GXBB + - "amlogic,meson-gxl-saradc" for GXL + - "amlogic,meson-gxm-saradc" for GXM + - "amlogic,meson-axg-saradc" for AXG + along with the generic "amlogic,meson-saradc" +- reg: the physical base address and length of the registers +- interrupts: the interrupt indicating end of sampling +- clocks: phandle and clock identifier (see clock-names) +- clock-names: mandatory clocks: + - "clkin" for the reference clock (typically XTAL) + - "core" for the SAR ADC core clock + optional clocks: + - "adc_clk" for the ADC (sampling) clock + - "adc_sel" for the ADC (sampling) clock mux +- vref-supply: the regulator supply for the ADC reference voltage +- #io-channel-cells: must be 1, see ../iio-bindings.txt + +Example: + saradc: adc@8680 { + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; + #io-channel-cells = <1>; + reg = <0x0 0x8680 0x0 0x34>; + interrupts = ; + clocks = <&xtal>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>, + <&clkc CLKID_SAR_ADC_CLK>, + <&clkc CLKID_SAR_ADC_SEL>; + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt new file mode 100644 index 000000000..034fc2ba1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt @@ -0,0 +1,22 @@ +Aspeed ADC + +This device is a 10-bit converter for 16 voltage channels. All inputs are +single ended. + +Required properties: +- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc" +- reg: memory window mapping address and length +- clocks: Input clock used to derive the sample clock. Expected to be the + SoC's APB clock. +- resets: Reset controller phandle +- #io-channel-cells: Must be set to <1> to indicate channels are selected + by index. + +Example: + adc@1e6e9000 { + compatible = "aspeed,ast2400-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt new file mode 100644 index 000000000..4a3c1d496 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt @@ -0,0 +1,50 @@ +* AT91 SAMA5D2 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "atmel,sama5d2-adc". + - reg: Should contain ADC registers location and length. + - interrupts: Should contain the IRQ line for the ADC. + - clocks: phandle to device clock. + - clock-names: Must be "adc_clk". + - vref-supply: Supply used as reference for conversions. + - vddana-supply: Supply for the adc device. + - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC. + - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC. + - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC. + - atmel,trigger-edge-type: One of possible edge types for the ADTRG hardware + trigger pin. When the specific edge type is detected, the conversion will + start. Possible values are rising, falling, or both. + This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING , + IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH + +Optional properties: + - dmas: Phandle to dma channel for the ADC. + - dma-names: Must be "rx" when dmas property is being used. + See ../../dma/dma.txt for details. + - #io-channel-cells: in case consumer drivers are attached, this must be 1. + See for details. + +Properties for consumer drivers: + - Consumer drivers can be connected to this producer device, as specified + in + - Channels exposed are specified in: + + +Example: + +adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + vddana-supply = <&vdd_3v3_lp_reg>; + vref-supply = <&vdd_3v3_lp_reg>; + atmel,trigger-edge-type = ; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; + dma-names = "rx"; + #io-channel-cells = <1>; +} diff --git a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt new file mode 100644 index 000000000..f65b04fb7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt @@ -0,0 +1,83 @@ +* AT91's Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "atmel,-adc" + can be "at91sam9260", "at91sam9g45" or "at91sam9x5" + - reg: Should contain ADC registers location and length + - interrupts: Should contain the IRQ line for the ADC + - clock-names: tuple listing input clock names. + Required elements: "adc_clk", "adc_op_clk". + - clocks: phandles to input clocks. + - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this + device + - atmel,adc-startup-time: Startup Time of the ADC in microseconds as + defined in the datasheet + - atmel,adc-vref: Reference voltage in millivolts for the conversions + - atmel,adc-res: List of resolutions in bits supported by the ADC. List size + must be two at least. + - atmel,adc-res-names: Contains one identifier string for each resolution + in atmel,adc-res property. "lowres" and "highres" + identifiers are required. + +Optional properties: + - atmel,adc-use-external-triggers: Boolean to enable the external triggers + - atmel,adc-use-res: String corresponding to an identifier from + atmel,adc-res-names property. If not specified, the highest + resolution will be used. + - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion + - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds + - atmel,adc-ts-wires: Number of touchscreen wires. Should be 4 or 5. If this + value is set, then the adc driver will enable touchscreen + support. + NOTE: when adc touchscreen is enabled, the adc hardware trigger will be + disabled. Since touchscreen will occupy the trigger register. + - atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It + makes touch detection more precise. + +Optional trigger Nodes: + - Required properties: + * trigger-name: Name of the trigger exposed to the user + * trigger-value: Value to put in the Trigger register + to activate this trigger + - Optional properties: + * trigger-external: Is the trigger an external trigger? + +Examples: +adc0: adc@fffb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9260-adc"; + reg = <0xfffb0000 0x100>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-channels-used = <0xff>; + atmel,adc-startup-time = <40>; + atmel,adc-use-external-triggers; + atmel,adc-vref = <3300>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "lowres"; + + trigger0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + + trigger2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + + trigger3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt new file mode 100644 index 000000000..7222328a3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt @@ -0,0 +1,24 @@ +* AVIA HX711 ADC chip for weight cells + Bit-banging driver + +Required properties: + - compatible: Should be "avia,hx711" + - sck-gpios: Definition of the GPIO for the clock + - dout-gpios: Definition of the GPIO for data-out + See Documentation/devicetree/bindings/gpio/gpio.txt + - avdd-supply: Definition of the regulator used as analog supply + +Optional properties: + - clock-frequency: Frequency of PD_SCK in Hz + Minimum value allowed is 10 kHz because of maximum + high time of 50 microseconds. + +Example: +weight { + compatible = "avia,hx711"; + sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + avdd-suppy = <&avdd>; + clock-frequency = <100000>; +}; + diff --git a/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt new file mode 100644 index 000000000..7a6313913 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt @@ -0,0 +1,48 @@ +* X-Powers AXP ADC bindings + +Required properties: + - compatible: should be one of: + - "x-powers,axp209-adc", + - "x-powers,axp221-adc", + - "x-powers,axp813-adc", + - #io-channel-cells: should be 1, + +Example: + +&axp22x { + adc { + compatible = "x-powers,axp221-adc"; + #io-channel-cells = <1>; + }; +}; + +ADC channels and their indexes per variant: + +AXP209 +------ + 0 | acin_v + 1 | acin_i + 2 | vbus_v + 3 | vbus_i + 4 | pmic_temp + 5 | gpio0_v + 6 | gpio1_v + 7 | ipsout_v + 8 | batt_v + 9 | batt_chrg_i +10 | batt_dischrg_i + +AXP22x +------ + 0 | pmic_temp + 1 | batt_v + 2 | batt_chrg_i + 3 | batt_dischrg_i + +AXP813 +------ + 0 | pmic_temp + 1 | gpio0_v + 2 | batt_v + 3 | batt_chrg_i + 4 | batt_dischrg_i diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt new file mode 100644 index 000000000..908334c6b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt @@ -0,0 +1,19 @@ +* Berlin Analog to Digital Converter (ADC) + +The Berlin ADC has 8 channels, with one connected to a temperature sensor. +It is part of the system controller register set. The ADC node should be a +sub-node of the system controller node. + +Required properties: +- compatible: must be "marvell,berlin2-adc" +- interrupts: the interrupts for the ADC and the temperature sensor +- interrupt-names: should be "adc" and "tsen" + +Example: + +adc: adc { + compatible = "marvell,berlin2-adc"; + interrupt-parent = <&sic>; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt new file mode 100644 index 000000000..7b1b1e408 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt @@ -0,0 +1,40 @@ +* Broadcom's IPROC Static ADC controller + +Broadcom iProc ADC controller has 8 channels 10bit ADC. +Allows user to convert analog input voltage values to digital. + +Required properties: + +- compatible: Must be "brcm,iproc-static-adc" + +- adc-syscon: Handler of syscon node defining physical base address of the + controller and length of memory mapped region. + +- #io-channel-cells = <1>; As ADC has multiple outputs + refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + +- io-channel-ranges: + refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + +- clocks: Clock used for this block. + +- clock-names: Clock name should be given as tsc_clk. + +- interrupts: interrupt line number. + +For example: + + ts_adc_syscon: ts_adc_syscon@180a6000 { + compatible = "brcm,iproc-ts-adc-syscon","syscon"; + reg = <0x180a6000 0xc30>; + }; + + adc: adc@180a6000 { + compatible = "brcm,iproc-static-adc"; + adc-syscon = <&ts_adc_syscon>; + #io-channel-cells = <1>; + io-channel-ranges; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt b/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt new file mode 100644 index 000000000..904f76de9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt @@ -0,0 +1,22 @@ +* Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC) + +Required properties: + - compatible: Should be "cosmic,10001-adc" + - reg: Should contain adc registers location and length. + - clock-names: Should contain "adc". + - clocks: Should contain a clock specifier for each entry in clock-names + - vref-supply: The regulator supply ADC reference voltage. + +Optional properties: + - adc-reserved-channels: Bitmask of reserved channels, + i.e. channels that cannot be used by the OS. + +Example: +adc: adc@18101600 { + compatible = "cosmic,10001-adc"; + reg = <0x18101600 0x24>; + adc-reserved-channels = <0x2>; + clocks = <&adc_clk>; + clock-names = "adc"; + vref-supply = <®_1v8>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt new file mode 100644 index 000000000..ec04008e8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt @@ -0,0 +1,17 @@ +Motorola CPCAP PMIC ADC binding + +Required properties: +- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc" +- interrupts: The interrupt number for the ADC device +- interrupt-names: Should be "adcdone" +- #io-channel-cells: Number of cells in an IIO specifier + +Example: + +cpcap_adc: adc { + compatible = "motorola,mapphone-cpcap-adc"; + interrupt-parent = <&cpcap>; + interrupts = <8 IRQ_TYPE_NONE>; + interrupt-names = "adcdone"; + #io-channel-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt new file mode 100644 index 000000000..c07228da9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt @@ -0,0 +1,16 @@ +Dialog Semiconductor DA9150 IIO GPADC bindings + +Required properties: +- compatible: "dlg,da9150-gpadc" for DA9150 IIO GPADC +- #io-channel-cells: Should be set to <1> + (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info) + +For further information on GPADC channels, see device datasheet. + + +Example: + + gpadc: da9150-gpadc { + compatible = "dlg,da9150-gpadc"; + #io-channel-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt new file mode 100644 index 000000000..27544bdd4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt @@ -0,0 +1,54 @@ +Bindings for ADC envelope detector using a DAC and a comparator + +The DAC is used to find the peak level of an alternating voltage input +signal by a binary search using the output of a comparator wired to +an interrupt pin. Like so: + _ + | \ + input +------>-------|+ \ + | \ + .-------. | }---. + | | | / | + | dac|-->--|- / | + | | |_/ | + | | | + | | | + | irq|------<-------' + | | + '-------' + +Required properties: +- compatible: Should be "axentia,tse850-envelope-detector" +- io-channels: Channel node of the dac to be used for comparator input. +- io-channel-names: Should be "dac". +- interrupt specification for one client interrupt, + see ../../interrupt-controller/interrupts.txt for details. +- interrupt-names: Should be "comp". + +Example: + + &i2c { + dpot: mcp4651-104@28 { + compatible = "microchip,mcp4651-104"; + reg = <0x28>; + #io-channel-cells = <1>; + }; + }; + + dac: dac { + compatible = "dpot-dac"; + vref-supply = <®_3v3>; + io-channels = <&dpot 0>; + io-channel-names = "dpot"; + #io-channel-cells = <1>; + }; + + envelope-detector { + compatible = "axentia,tse850-envelope-detector"; + io-channels = <&dac 0>; + io-channel-names = "dac"; + + interrupt-parent = <&gpio>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "comp"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt new file mode 100644 index 000000000..eebdcec3d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt @@ -0,0 +1,57 @@ +Freescale i.MX25 ADC GCQ device + +This is a generic conversion queue device that can convert any of the +analog inputs using the ADC unit of the i.MX25. + +Required properties: + - compatible: Should be "fsl,imx25-gcq". + - reg: Should be the register range of the module. + - interrupts: Should be the interrupt number of the module. + Typically this is <1>. + - #address-cells: Should be <1> (setting for the subnodes) + - #size-cells: Should be <0> (setting for the subnodes) + +Optional properties: + - vref-ext-supply: The regulator supplying the ADC reference voltage. + Required when at least one subnode uses the this reference. + - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP. + Required when at least one subnode uses this reference. + - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP. + Required when at least one subnode uses this reference. + +Sub-nodes: +Optionally you can define subnodes which define the reference voltage +for the analog inputs. + +Required properties for subnodes: + - reg: Should be the number of the analog input. + 0: xp + 1: yp + 2: xn + 3: yn + 4: wiper + 5: inaux0 + 6: inaux1 + 7: inaux2 +Optional properties for subnodes: + - fsl,adc-refp: specifies the positive reference input as defined in + + - fsl,adc-refn: specifies the negative reference input as defined in + + +Example: + + adc: adc@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + + inaux@5 { + reg = <5>; + fsl,adc-refp = ; + fsl,adc-refn = ; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt new file mode 100644 index 000000000..3b0348c5e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/hi8435.txt @@ -0,0 +1,21 @@ +Holt Integrated Circuits HI-8435 threshold detector bindings + +Required properties: + - compatible: should be "holt,hi8435" + - reg: spi chip select number for the device + +Recommended properties: + - spi-max-frequency: definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: + - gpios: GPIO used for controlling the reset pin + +Example: +sensor@0 { + compatible = "holt,hi8435"; + reg = <0>; + gpios = <&gpio6 1 0>; + + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt new file mode 100644 index 000000000..5c184b940 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt @@ -0,0 +1,22 @@ +Freescale imx7d ADC bindings + +The devicetree bindings are for the ADC driver written for +imx7d SoC. + +Required properties: +- compatible: Should be "fsl,imx7d-adc" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- clock-names: Must contain "adc", matching entry in the clocks property +- vref-supply: The regulator supply ADC reference voltage + +Example: +adc1: adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + vref-supply = <®_vcc_3v3_mcu>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt new file mode 100644 index 000000000..9ada5abd4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt @@ -0,0 +1,20 @@ +NXP LPC1850 ADC bindings + +Required properties: +- compatible: Should be "nxp,lpc1850-adc" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- vref-supply: The regulator supply ADC reference voltage +- resets: phandle to reset controller and line specifier + +Example: + +adc0: adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + vref-supply = <®_vdda>; + resets = <&rgu 40>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt new file mode 100644 index 000000000..a237ed99c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt @@ -0,0 +1,13 @@ +* Linear Technology / Analog Devices LTC2497 ADC + +Required properties: + - compatible: Must be "lltc,ltc2497" + - reg: Must contain the ADC I2C address + - vref-supply: The regulator supply for ADC reference voltage + +Example: + ltc2497: adc@76 { + compatible = "lltc,ltc2497"; + reg = <0x76>; + vref-supply = <<c2497_reg>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt new file mode 100644 index 000000000..e680c61df --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt @@ -0,0 +1,20 @@ +* Maxim 1027/1029/1031 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031" + - reg: SPI chip select number for the device + - interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Recommended properties: +- spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/max11100.txt b/Documentation/devicetree/bindings/iio/adc/max11100.txt new file mode 100644 index 000000000..b7f7177b8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max11100.txt @@ -0,0 +1,18 @@ +* Maxim max11100 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "maxim,max11100" + - reg: the adc unit address + - vref-supply: phandle to the regulator that provides reference voltage + +Optional properties: + - spi-max-frequency: SPI maximum frequency + +Example: + +max11100: adc@0 { + compatible = "maxim,max11100"; + reg = <0>; + vref-supply = <&adc0_vref>; + spi-max-frequency = <240000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/max1118.txt b/Documentation/devicetree/bindings/iio/adc/max1118.txt new file mode 100644 index 000000000..cf33d0b15 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max1118.txt @@ -0,0 +1,21 @@ +* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs + +Required properties: + - compatible: Should be one of + * "maxim,max1117" + * "maxim,max1118" + * "maxim,max1119" + - reg: spi chip select number for the device + - (max1118 only) vref-supply: The regulator supply for ADC reference voltage + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "maxim,max1118"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt new file mode 100644 index 000000000..94a9011dd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max1363.txt @@ -0,0 +1,63 @@ +* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC) + +The node for this driver must be a child node of a I2C controller, hence +all mandatory properties for your controller must be specified. See directory: + + Documentation/devicetree/bindings/i2c + +for more details. + +Required properties: + - compatible: Should be one of + "maxim,max1361" + "maxim,max1362" + "maxim,max1363" + "maxim,max1364" + "maxim,max1036" + "maxim,max1037" + "maxim,max1038" + "maxim,max1039" + "maxim,max1136" + "maxim,max1137" + "maxim,max1138" + "maxim,max1139" + "maxim,max1236" + "maxim,max1237" + "maxim,max1238" + "maxim,max1239" + "maxim,max11600" + "maxim,max11601" + "maxim,max11602" + "maxim,max11603" + "maxim,max11604" + "maxim,max11605" + "maxim,max11606" + "maxim,max11607" + "maxim,max11608" + "maxim,max11609" + "maxim,max11610" + "maxim,max11611" + "maxim,max11612" + "maxim,max11613" + "maxim,max11614" + "maxim,max11615" + "maxim,max11616" + "maxim,max11617" + "maxim,max11644" + "maxim,max11645" + "maxim,max11646" + "maxim,max11647" + - reg: Should contain the ADC I2C address + +Optional properties: + - vcc-supply: phandle to the regulator that provides power to the ADC. + - vref-supply: phandle to the regulator for ADC reference voltage. + - interrupts: IRQ line for the ADC. If not used the driver will use + polling. + +Example: +adc: max11644@36 { + compatible = "maxim,max11644"; + reg = <0x36>; + vref-supply = <&adc_vref>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/max9611.txt b/Documentation/devicetree/bindings/iio/adc/max9611.txt new file mode 100644 index 000000000..ab4f43145 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max9611.txt @@ -0,0 +1,27 @@ +* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface + +Maxim max9611/max9612 is an high-side current sense amplifier with integrated +12-bits ADC communicating over I2c bus. +The device node for this driver shall be a child of a I2c controller. + +Required properties + - compatible: Should be "maxim,max9611" or "maxim,max9612" + - reg: The 7-bits long I2c address of the device + - shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt + resistor + +Example: + +&i2c4 { + csa: adc@7c { + compatible = "maxim,max9611"; + reg = <0x7c>; + + shunt-resistor-micro-ohms = <5000>; + }; +}; + +This device node describes a current sense amplifier sitting on I2c4 bus +with address 0x7c (read address is 0xf9, write address is 0xf8). +A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing +inputs. diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt new file mode 100644 index 000000000..56373d643 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt @@ -0,0 +1,57 @@ +* Microchip Analog to Digital Converter (ADC) + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "mcp3001" (DEPRECATED) + "mcp3002" (DEPRECATED) + "mcp3004" (DEPRECATED) + "mcp3008" (DEPRECATED) + "mcp3201" (DEPRECATED) + "mcp3202" (DEPRECATED) + "mcp3204" (DEPRECATED) + "mcp3208" (DEPRECATED) + "mcp3301" (DEPRECATED) + + "microchip,mcp3001" + "microchip,mcp3002" + "microchip,mcp3004" + "microchip,mcp3008" + "microchip,mcp3201" + "microchip,mcp3202" + "microchip,mcp3204" + "microchip,mcp3208" + "microchip,mcp3301" + "microchip,mcp3550-50" + "microchip,mcp3550-60" + "microchip,mcp3551" + "microchip,mcp3553" + + NOTE: The use of the compatibles with no vendor prefix + is deprecated and only listed because old DT use them. + + - spi-cpha, spi-cpol (boolean): + Either SPI mode (0,0) or (1,1) must be used, so specify + none or both of spi-cpha, spi-cpol. The MCP3550/1/3 + is more efficient in mode (1,1) as only 3 instead of + 4 bytes need to be read from the ADC, but not all SPI + masters support it. + + - vref-supply: Phandle to the external reference voltage supply. + +Examples: +spi_controller { + mcp3x0x@0 { + compatible = "microchip,mcp3002"; + reg = <0>; + spi-max-frequency = <1000000>; + vref-supply = <&vref_reg>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt new file mode 100644 index 000000000..82bcce072 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt @@ -0,0 +1,19 @@ +* Microchip mcp3421/2/3/4/6/7/8 chip family (ADC) + +Required properties: + - compatible: Should be + "microchip,mcp3421" or + "microchip,mcp3422" or + "microchip,mcp3423" or + "microchip,mcp3424" or + "microchip,mcp3425" or + "microchip,mcp3426" or + "microchip,mcp3427" or + "microchip,mcp3428" + - reg: I2C address for the device + +Example: +adc@0 { + compatible = "microchip,mcp3424"; + reg = <0x68>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt new file mode 100644 index 000000000..0df9befda --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -0,0 +1,31 @@ +* Mediatek AUXADC - Analog to Digital Converter on Mediatek mobile soc (mt65xx/mt81xx/mt27xx) +=============== + +The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found +in some Mediatek SoCs which among other things measures the temperatures +in the SoC. It can be used directly with register accesses, but it is also +used by thermal controller which reads the temperatures from the AUXADC +directly via its own bus interface. See +Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +for the Thermal Controller which holds a phandle to the AUXADC. + +Required properties: + - compatible: Should be one of: + - "mediatek,mt2701-auxadc": For MT2701 family of SoCs + - "mediatek,mt2712-auxadc": For MT2712 family of SoCs + - "mediatek,mt7622-auxadc": For MT7622 family of SoCs + - "mediatek,mt8173-auxadc": For MT8173 family of SoCs + - reg: Address range of the AUXADC unit. + - clocks: Should contain a clock specifier for each entry in clock-names + - clock-names: Should contain "main". + - #io-channel-cells: Should be 1, see ../iio-bindings.txt + +Example: + +auxadc: adc@11001000 { + compatible = "mediatek,mt2701-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt new file mode 100644 index 000000000..e9582e6fe --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt @@ -0,0 +1,18 @@ +* Nuvoton NAU7802 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "nuvoton,nau7802" + - reg: Should contain the ADC I2C address + +Optional properties: + - nuvoton,vldo: Internal reference voltage in millivolts to be + configured valid values are between 2400 mV and 4500 mV. + - interrupts: IRQ line for the ADC. If not used the driver will use + polling. + +Example: +adc2: nau7802@2a { + compatible = "nuvoton,nau7802"; + reg = <0x2a>; + nuvoton,vldo = <3000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt new file mode 100644 index 000000000..4bb9a8606 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt @@ -0,0 +1,48 @@ +* Palmas general purpose ADC IP block devicetree bindings + +Channels list: + 0 battery type + 1 battery temp NTC (optional current source) + 2 GP + 3 temp (with ext. diode, optional current source) + 4 GP + 5 GP + 6 VBAT_SENSE + 7 VCC_SENSE + 8 Backup Battery voltage + 9 external charger (VCHG) + 10 VBUS + 11 DC-DC current probe (how does this work?) + 12 internal die temp + 13 internal die temp + 14 USB ID pin voltage + 15 test network + +Required properties: +- compatible : Must be "ti,palmas-gpadc". +- #io-channel-cells: Should be set to <1>. + +Optional sub-nodes: +ti,channel0-current-microamp: Channel 0 current in uA. + Values are rounded to derive 0uA, 5uA, 15uA, 20uA. +ti,channel3-current-microamp: Channel 3 current in uA. + Values are rounded to derive 0uA, 10uA, 400uA, 800uA. +ti,enable-extended-delay: Enable extended delay. + +Example: + +pmic { + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; + ... + gpadc { + compatible = "ti,palmas-gpadc"; + interrupts = <18 0 + 16 0 + 17 0>; + #io-channel-cells = <1>; + ti,channel0-current-microamp = <5>; + ti,channel3-current-microamp = <10>; + }; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt new file mode 100644 index 000000000..3ae061277 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt @@ -0,0 +1,157 @@ +Qualcomm's PM8xxx voltage XOADC + +The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal +oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921. + +Required properties: + +- compatible: should be one of: + "qcom,pm8018-adc" + "qcom,pm8038-adc" + "qcom,pm8058-adc" + "qcom,pm8921-adc" + +- reg: should contain the ADC base address in the PMIC, typically + 0x197. + +- xoadc-ref-supply: should reference a regulator that can supply + a reference voltage on demand. The reference voltage may vary + with PMIC variant but is typically something like 2.2 or 1.8V. + +The following required properties are standard for IO channels, see +iio-bindings.txt for more details, but notice that this particular +ADC has a special addressing scheme that require two cells for +identifying each ADC channel: + +- #address-cells: should be set to <2>, the first cell is the + prescaler (on PM8058) or premux (on PM8921) with two valid bits + so legal values are 0x00, 0x01 or 0x02. The second cell + is the main analog mux setting (0x00..0x0f). The combination + of prescaler/premux and analog mux uniquely addresses a hardware + channel on all systems. + +- #size-cells: should be set to <0> + +- #io-channel-cells: should be set to <2>, again the cells are + precaler or premux followed by the analog muxing line. + +- interrupts: should refer to the parent PMIC interrupt controller + and reference the proper ADC interrupt. + +Required subnodes: + +The ADC channels are configured as subnodes of the ADC. + +Since some of them are used for calibrating the ADC, these nodes are +compulsory: + +adc-channel@c { + reg = <0x00 0x0c>; +}; + +adc-channel@d { + reg = <0x00 0x0d>; +}; + +adc-channel@f { + reg = <0x00 0x0f>; +}; + +These three nodes are used for absolute and ratiometric calibration +and only need to have these reg values: they are by hardware definition +1:1 ratio converters that sample 625, 1250 and 0 milliV and create +an interpolation calibration for all other ADCs. + +Optional subnodes: any channels other than channels [0x00 0x0c], +[0x00 0x0d] and [0x00 0x0f] are optional. + +Required channel node properties: + +- reg: should contain the hardware channel number in the range + 0 .. 0xff (8 bits). + +Optional channel node properties: + +- qcom,decimation: + Value type: + Definition: This parameter is used to decrease the ADC sampling rate. + Quicker measurements can be made by reducing the decimation ratio. + Valid values are 512, 1024, 2048, 4096. + If the property is not found, a default value of 512 will be used. + +- qcom,ratiometric: + Value type: + Definition: Channel calibration type. If this property is specified + VADC will use a special voltage references for channel + calibration. The available references are specified in the + as a u32 value setting (see below) and it is compulsory + to also specify this reference if ratiometric calibration + is selected. + + If the property is not found, the channel will be + calibrated with the 0.625V and 1.25V reference channels, also + known as an absolute calibration. + The reference voltage pairs when using ratiometric calibration: + 0 = XO_IN/XOADC_GND + 1 = PMIC_IN/XOADC_GND + 2 = PMIC_IN/BMS_CSP + 3 (invalid) + 4 = XOADC_GND/XOADC_GND + 5 = XOADC_VREF/XOADC_GND + +Example: + +xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + ichg: adc-channel@3 { + reg = <0x00 0x03>; + }; + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + ref_325mv: adc-channel@e { + reg = <0x00 0x0e>; + }; + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; +}; + +/* IIO client node */ +iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&xoadc 0x00 0x01>, /* Battery */ + <&xoadc 0x00 0x02>, /* DC in (charger) */ + <&xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&xoadc 0x00 0x0b>, /* Die temperature */ + <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ +}; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt new file mode 100644 index 000000000..4e36d6e2f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt @@ -0,0 +1,46 @@ +Qualcomm's SPMI PMIC current ADC + +QPNP PMIC current ADC (IADC) provides interface to clients to read current. +A 16 bit ADC is used for current measurements. IADC can measure the current +through an external resistor (channel 1) or internal (built-in) resistor +(channel 0). When using an external resistor it is to be described by +qcom,external-resistor-micro-ohms property. + +IADC node: + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,spmi-iadc". + +- reg: + Usage: required + Value type: + Definition: IADC base address and length in the SPMI PMIC register map + +- interrupts: + Usage: optional + Value type: + Definition: End of ADC conversion. + +- qcom,external-resistor-micro-ohms: + Usage: optional + Value type: + Definition: Sense resister value in micro Ohm. + If not defined value of 10000 micro Ohms will be used. + +Example: + /* IADC node */ + pmic_iadc: iadc@3600 { + compatible = "qcom,spmi-iadc"; + reg = <0x3600 0x100>; + interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; + qcom,external-resistor-micro-ohms = <10000>; + #io-channel-cells = <1>; + }; + + /* IIO client node */ + bat { + io-channels = <&pmic_iadc 0>; + io-channel-names = "iadc"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt new file mode 100644 index 000000000..0fb46137f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt @@ -0,0 +1,129 @@ +Qualcomm's SPMI PMIC voltage ADC + +SPMI PMIC voltage ADC (VADC) provides interface to clients to read +voltage. The VADC is a 15-bit sigma-delta ADC. + +VADC node: + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,spmi-vadc". + +- reg: + Usage: required + Value type: + Definition: VADC base address and length in the SPMI PMIC register map. + +- #address-cells: + Usage: required + Value type: + Definition: Must be one. Child node 'reg' property should define ADC + channel number. + +- #size-cells: + Usage: required + Value type: + Definition: Must be zero. + +- #io-channel-cells: + Usage: required + Value type: + Definition: Must be one. For details about IIO bindings see: + Documentation/devicetree/bindings/iio/iio-bindings.txt + +- interrupts: + Usage: optional + Value type: + Definition: End of conversion interrupt. + +Channel node properties: + +- reg: + Usage: required + Value type: + Definition: ADC channel number. + See include/dt-bindings/iio/qcom,spmi-vadc.h + +- qcom,decimation: + Usage: optional + Value type: + Definition: This parameter is used to decrease ADC sampling rate. + Quicker measurements can be made by reducing decimation ratio. + Valid values are 512, 1024, 2048, 4096. + If property is not found, default value of 512 will be used. + +- qcom,pre-scaling: + Usage: optional + Value type: + Definition: Used for scaling the channel input signal before the signal is + fed to VADC. The configuration for this node is to know the + pre-determined ratio and use it for post scaling. Select one from + the following options. + <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10> + If property is not found default value depending on chip will be used. + +- qcom,ratiometric: + Usage: optional + Value type: + Definition: Channel calibration type. If this property is specified + VADC will use the VDD reference (1.8V) and GND for channel + calibration. If property is not found, channel will be + calibrated with 0.625V and 1.25V reference channels, also + known as absolute calibration. + +- qcom,hw-settle-time: + Usage: optional + Value type: + Definition: Time between AMUX getting configured and the ADC starting + conversion. Delay = 100us * (value) for value < 11, and + 2ms * (value - 10) otherwise. + Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800, + 900 us and 1, 2, 4, 6, 8, 10 ms + If property is not found, channel will use 0us. + +- qcom,avg-samples: + Usage: optional + Value type: + Definition: Number of samples to be used for measurement. + Averaging provides the option to obtain a single measurement + from the ADC that is an average of multiple samples. The value + selected is 2^(value). + Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 + If property is not found, 1 sample will be used. + +NOTE: + +Following channels, also known as reference point channels, are used for +result calibration and their channel configuration nodes should be defined: +VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, +VADC_GND_REF and VADC_VDD_VADC. + +Example: + + /* VADC node */ + pmic_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + io-channel-ranges; + + /* Channel node */ + usb_id_nopull { + reg = ; + qcom,decimation = <512>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,avg-samples = <1>; + qcom,pre-scaling = <1 3>; + }; + }; + + /* IIO client node */ + usb { + io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>; + io-channel-names = "vadc"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt new file mode 100644 index 000000000..df5b9f2ad --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt @@ -0,0 +1,98 @@ +* Renesas R-Car GyroADC device driver + +The GyroADC block is a reduced SPI block with up to 8 chipselect lines, +which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs +are sampled by the GyroADC block in a round-robin fashion and the result +presented in the GyroADC registers. + +Required properties: +- compatible: Should be "", "renesas,rcar-gyroadc". + The should be one of: + renesas,r8a7791-gyroadc - for the GyroADC block present + in r8a7791 SoC + renesas,r8a7792-gyroadc - for the GyroADC with interrupt + block present in r8a7792 SoC +- reg: Address and length of the register set for the device +- clocks: References to all the clocks specified in the clock-names + property as specified in + Documentation/devicetree/bindings/clock/clock-bindings.txt. +- clock-names: Shall contain "fck". The "fck" is the GyroADC block clock. +- power-domains: Must contain a reference to the PM domain, if available. +- #address-cells: Should be <1> (setting for the subnodes) for all ADCs + except for "fujitsu,mb88101a". Should be <0> (setting for + only subnode) for "fujitsu,mb88101a". +- #size-cells: Should be <0> (setting for the subnodes) + +Sub-nodes: +You must define subnode(s) which select the connected ADC type and reference +voltage for the GyroADC channels. + +Required properties for subnodes: +- compatible: Should be either of: + "fujitsu,mb88101a" + - Fujitsu MB88101A compatible mode, + 12bit sampling, up to 4 channels can be sampled in + round-robin fashion. One Fujitsu chip supplies four + GyroADC channels with data as it contains four ADCs + on the chip and thus for 4-channel operation, single + MB88101A is required. The Cx chipselect lines of the + MB88101A connect directly to two CHS lines of the + GyroADC, no demuxer is required. The data out line + of each MB88101A connects to a shared input pin of + the GyroADC. + "ti,adcs7476" or "ti,adc121" or "adi,ad7476" + - TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode, + 15bit sampling, up to 8 channels can be sampled in + round-robin fashion. One TI/ADI chip supplies single + ADC channel with data, thus for 8-channel operation, + 8 chips are required. A 3:8 chipselect demuxer is + required to connect the nCS line of the TI/ADI chips + to the GyroADC, while MISO line of each TI/ADI ADC + connects to a shared input pin of the GyroADC. + "maxim,max1162" or "maxim,max11100" + - Maxim MAX1162 / Maxim MAX11100 compatible mode, + 16bit sampling, up to 8 channels can be sampled in + round-robin fashion. One Maxim chip supplies single + ADC channel with data, thus for 8-channel operation, + 8 chips are required. A 3:8 chipselect demuxer is + required to connect the nCS line of the MAX chips + to the GyroADC, while MISO line of each Maxim ADC + connects to a shared input pin of the GyroADC. +- reg: Should be the number of the analog input. Should be present + for all ADCs except "fujitsu,mb88101a". +- vref-supply: Reference to the channel reference voltage regulator. + +Example: + vref_max1162: regulator-vref-max1162 { + compatible = "regulator-fixed"; + + regulator-name = "MAX1162 Vref"; + regulator-min-microvolt = <4096000>; + regulator-max-microvolt = <4096000>; + }; + + adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; + reg = <0 0xe6e54000 0 64>; + clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + + pinctrl-0 = <&adc_pins>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + reg = <0>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + + adc@1 { + reg = <1>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt new file mode 100644 index 000000000..c2c50b598 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt @@ -0,0 +1,37 @@ +Rockchip Successive Approximation Register (SAR) A/D Converter bindings + +Required properties: +- compatible: should be "rockchip,-saradc" or "rockchip,rk3066-tsadc" + - "rockchip,saradc": for rk3188, rk3288 + - "rockchip,rk3066-tsadc": for rk3036 + - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328 + - "rockchip,rk3399-saradc": for rk3399 + - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108 + +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for + the peripheral clock. +- vref-supply: The regulator supply ADC reference voltage. +- #io-channel-cells: Should be 1, see ../iio-bindings.txt + +Optional properties: +- resets: Must contain an entry for each entry in reset-names if need support + this option. See ../reset/reset.txt for details. +- reset-names: Must include the name "saradc-apb". + +Example: + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = ; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; + #io-channel-cells = <1>; + vref-supply = <&vcc18>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt new file mode 100644 index 000000000..e1fe02f3e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt @@ -0,0 +1,107 @@ +Samsung Exynos Analog to Digital Converter bindings + +The devicetree bindings are for the new ADC driver written for +Exynos4 and upward SoCs from Samsung. + +New driver handles the following +1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 + and future SoCs from Samsung +2. Add ADC driver under iio/adc framework +3. Also adds the Documentation for device tree bindings + +Required properties: +- compatible: Must be "samsung,exynos-adc-v1" + for Exynos5250 controllers. + Must be "samsung,exynos-adc-v2" for + future controllers. + Must be "samsung,exynos3250-adc" for + controllers compatible with ADC of Exynos3250. + Must be "samsung,exynos4212-adc" for + controllers compatible with ADC of Exynos4212 and Exynos4412. + Must be "samsung,exynos7-adc" for + the ADC in Exynos7 and compatibles + Must be "samsung,s3c2410-adc" for + the ADC in s3c2410 and compatibles + Must be "samsung,s3c2416-adc" for + the ADC in s3c2416 and compatibles + Must be "samsung,s3c2440-adc" for + the ADC in s3c2440 and compatibles + Must be "samsung,s3c2443-adc" for + the ADC in s3c2443 and compatibles + Must be "samsung,s3c6410-adc" for + the ADC in s3c6410 and compatibles + Must be "samsung,s5pv210-adc" for + the ADC in s5pv210 and compatibles +- reg: List of ADC register address range + - The base address and range of ADC register + - The base address and range of ADC_PHY register (every + SoC except for s3c24xx/s3c64xx ADC) +- interrupts: Contains the interrupt information for the timer. The + format is being dependent on which interrupt controller + the Samsung device uses. +- #io-channel-cells = <1>; As ADC has multiple outputs +- clocks From common clock bindings: handles to clocks specified + in "clock-names" property, in the same order. +- clock-names From common clock bindings: list of clock input names + used by ADC block: + - "adc" : ADC bus clock + - "sclk" : ADC special clock (only for Exynos3250 and + compatible ADC block) +- vdd-supply VDD input supply. + +- samsung,syscon-phandle Contains the PMU system controller node + (To access the ADC_PHY register on Exynos5250/5420/5800/3250) +Optional properties: +- has-touchscreen: If present, indicates that a touchscreen is + connected an usable. + +Note: child nodes can be added for auto probing from device tree. + +Example: adding device info in dtsi file + +adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12D10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + +Example: adding device info in dtsi file for Exynos3250 with additional sclk + +adc: adc@126c0000 { + compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + +Example: Adding child nodes in dts file + +adc@12d10000 { + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; +}; + +Note: Does not apply to ADC driver under arch/arm/plat-samsung/ +Note: The child node can be added under the adc node or separately. diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt new file mode 100644 index 000000000..59b92cd32 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt @@ -0,0 +1,13 @@ +Device-Tree bindings for sigma delta modulator + +Required properties: +- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use + as a generic SD modulator if modulator not specified in compatible list. +- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers". + +Example node: + + ads1202: adc { + compatible = "sd-modulator"; + #io-channel-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt new file mode 100644 index 000000000..8aad960de --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt @@ -0,0 +1,36 @@ +Spreadtrum SC27XX series PMICs ADC binding + +Required properties: +- compatible: Should be one of the following. + "sprd,sc2720-adc" + "sprd,sc2721-adc" + "sprd,sc2723-adc" + "sprd,sc2730-adc" + "sprd,sc2731-adc" +- reg: The address offset of ADC controller. +- interrupt-parent: The interrupt controller. +- interrupts: The interrupt number for the ADC device. +- #io-channel-cells: Number of cells in an IIO specifier. +- hwlocks: Reference to a phandle of a hwlock provider node. + +Example: + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pmic_adc: adc@480 { + compatible = "sprd,sc2731-adc"; + reg = <0x480>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + hwlocks = <&hwlock 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt new file mode 100644 index 000000000..8346bcb04 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -0,0 +1,140 @@ +STMicroelectronics STM32 ADC device driver + +STM32 ADC is a successive approximation analog-to-digital converter. +It has several multiplexed input channels. Conversions can be performed +in single, continuous, scan or discontinuous mode. Result of the ADC is +stored in a left-aligned or right-aligned 32-bit data register. +Conversions can be launched in software or using hardware triggers. + +The analog watchdog feature allows the application to detect if the input +voltage goes beyond the user-defined, higher or lower thresholds. + +Each STM32 ADC block can have up to 3 ADC instances. + +Each instance supports two contexts to manage conversions, each one has its +own configurable sequence and trigger: +- regular conversion can be done in sequence, running in background +- injected conversions have higher priority, and so have the ability to + interrupt regular conversion sequence (either triggered in SW or HW). + Regular sequence is resumed, in case it has been interrupted. + +Contents of a stm32 adc root node: +----------------------------------- +Required properties: +- compatible: Should be one of: + "st,stm32f4-adc-core" + "st,stm32h7-adc-core" + "st,stm32mp1-adc-core" +- reg: Offset and length of the ADC block register set. +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4 + and stm32h7 share a common ADC interrupt line. stm32mp1 has two separate + interrupt lines, one for each ADC within ADC block. +- clocks: Core can use up to two clocks, depending on part used: + - "adc" clock: for the analog circuitry, common to all ADCs. + It's required on stm32f4. + It's optional on stm32h7. + - "bus" clock: for registers access, common to all ADCs. + It's not present on stm32f4. + It's required on stm32h7. +- clock-names: Must be "adc" and/or "bus" depending on part used. +- interrupt-controller: Identifies the controller node as interrupt-parent +- vref-supply: Phandle to the vref input analog reference voltage. +- #interrupt-cells = <1>; +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- A pinctrl state named "default" for each ADC channel may be defined to set + inX ADC pins in mode of operation for analog input on external pin. + +Contents of a stm32 adc child node: +----------------------------------- +An ADC block node should contain at least one subnode, representing an +ADC instance available on the machine. + +Required properties: +- compatible: Should be one of: + "st,stm32f4-adc" + "st,stm32h7-adc" + "st,stm32mp1-adc" +- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200). +- clocks: Input clock private to this ADC instance. It's required only on + stm32f4, that has per instance clock input for registers access. +- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or + 2 for adc@200). +- st,adc-channels: List of single-ended channels muxed for this ADC. + It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered + from 0 to 15 or 19 (resp. for in0..in15 or in0..in19). +- st,adc-diff-channels: List of differential channels muxed for this ADC. + Depending on part used, some channels can be configured as differential + instead of single-ended (e.g. stm32h7). List here positive and negative + inputs pairs as , ,... vinp and vinn are numbered + from 0 to 19 on stm32h7) + Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is required. + Both properties can be used together. Some channels can be used as + single-ended and some other ones as differential (mixed). But channels + can't be configured both as single-ended and differential (invalid). +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in + Documentation/devicetree/bindings/iio/iio-bindings.txt + +Optional properties: +- dmas: Phandle to dma channel for this ADC instance. + See ../../dma/dma.txt for details. +- dma-names: Must be "rx" when dmas property is being used. +- assigned-resolution-bits: Resolution (bits) to use for conversions. Must + match device available resolutions: + * can be 6, 8, 10 or 12 on stm32f4 + * can be 8, 10, 12, 14 or 16 on stm32h7 + Default is maximum resolution if unset. +- st,min-sample-time-nsecs: Minimum sampling time in nanoseconds. + Depending on hardware (board) e.g. high/low analog input source impedance, + fine tune of ADC sampling time may be recommended. + This can be either one value or an array that matches 'st,adc-channels' list, + to set sample time resp. for all channels, or independently for each channel. + +Example: + adc: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 168>; + clock-names = "adc"; + vref-supply = <®_vref>; + interrupt-controller; + pinctrl-names = "default"; + pinctrl-0 = <&adc3_in8_pin>; + + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 168>; + interrupt-parent = <&adc>; + interrupts = <0>; + st,adc-channels = <8>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; + assigned-resolution-bits = <8>; + }; + ... + other adc child nodes follow... + }; + +Example to setup: +- channel 1 as single-ended +- channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) + + adc: adc@40022000 { + compatible = "st,stm32h7-adc-core"; + ... + adc1: adc@0 { + compatible = "st,stm32h7-adc"; + ... + st,adc-channels = <1>; + st,adc-diff-channels = <2 6>, <3 7>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt new file mode 100644 index 000000000..75ba25d06 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt @@ -0,0 +1,135 @@ +STMicroelectronics STM32 DFSDM ADC device driver + + +STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to +interface external sigma delta modulators to STM32 micro controllers. +It is mainly targeted for: +- Sigma delta modulators (motor control, metering...) +- PDM microphones (audio digital microphone) + +It features up to 8 serial digital interfaces (SPI or Manchester) and +up to 4 filters on stm32h7 or 6 filters on stm32mp1. + +Each child node match with a filter instance. + +Contents of a STM32 DFSDM root node: +------------------------------------ +Required properties: +- compatible: Should be one of: + "st,stm32h7-dfsdm" + "st,stm32mp1-dfsdm" +- reg: Offset and length of the DFSDM block register set. +- clocks: IP and serial interfaces clocking. Should be set according + to rcc clock ID and "clock-names". +- clock-names: Input clock name "dfsdm" must be defined, + "audio" is optional. If defined CLKOUT is based on the audio + clock, else "dfsdm" is used. +- #interrupt-cells = <1>; +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- spi-max-frequency: Requested only for SPI master mode. + SPI clock OUT frequency (Hz). This clock must be set according + to "clock" property. Frequency must be a multiple of the rcc + clock frequency. If not, SPI CLKOUT frequency will not be + accurate. +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration + nodes to set pins in mode of operation for dfsdm + on external pin. + +Contents of a STM32 DFSDM child nodes: +-------------------------------------- + +Required properties: +- compatible: Must be: + "st,stm32-dfsdm-adc" for sigma delta ADCs + "st,stm32-dfsdm-dmic" for audio digital microphone. +- reg: Specifies the DFSDM filter instance used. + Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1. +- interrupts: IRQ lines connected to each DFSDM filter instance. +- st,adc-channels: List of single-ended channels muxed for this ADC. + valid values: + "st,stm32h7-dfsdm" compatibility: 0 to 7. +- st,adc-channel-names: List of single-ended channel names. +- st,filter-order: SinC filter order from 0 to 5. + 0: FastSinC + [1-5]: order 1 to 5. + For audio purpose it is recommended to use order 3 to 5. +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". + +Required properties for "st,stm32-dfsdm-adc" compatibility: +- io-channels: From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + This is not required for "st,stm32-dfsdm-pdm" compatibility as + PDM microphone is binded in Audio DT node. + +Required properties for "st,stm32-dfsdm-pdm" compatibility: +- #sound-dai-cells: Must be set to 0. +- dma: DMA controller phandle and DMA request line associated to the + filter instance (specified by the field "reg") +- dma-names: Must be "rx" + +Optional properties: +- st,adc-channel-types: Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 +- st,adc-channel-clk-src: Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + +- st,adc-alt-channel: Must be defined if two sigma delta modulator are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + +- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0. + Used for multi microphones synchronization. + +Example of a sigma delta adc connected on DFSDM SPI port 0 +and a pdm microphone connected on DFSDM SPI port 1: + + ads1202: simple_sd_adc@0 { + compatible = "ads1202"; + #io-channel-cells = <1>; + }; + + dfsdm: dfsdm@40017000 { + compatible = "st,stm32h7-dfsdm"; + reg = <0x40017000 0x400>; + clocks = <&rcc DFSDM1_CK>; + clock-names = "dfsdm"; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + dfsdm_adc0: filter@0 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <0>; + interrupts = <110>; + st,adc-channels = <0>; + st,adc-channel-names = "sd_adc0"; + st,adc-channel-types = "SPI_F"; + st,adc-channel-clk-src = "CLKOUT"; + io-channels = <&ads1202 0>; + st,filter-order = <3>; + }; + dfsdm_pdm1: filter@1 { + compatible = "st,stm32-dfsdm-dmic"; + reg = <1>; + interrupts = <111>; + dmas = <&dmamux1 102 0x400 0x00>; + dma-names = "rx"; + st,adc-channels = <1>; + st,adc-channel-names = "dmic1"; + st,adc-channel-types = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,filter-order = <5>; + }; + } diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt new file mode 100644 index 000000000..d91130587 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt @@ -0,0 +1,19 @@ +* Texas Instruments' ADC0831/ADC0832/ADC0832/ADC0838 + +Required properties: + - compatible: Should be one of + * "ti,adc0831" + * "ti,adc0832" + * "ti,adc0834" + * "ti,adc0838" + - reg: spi chip select number for the device + - vref-supply: The regulator supply for ADC reference voltage + - spi-max-frequency: Max SPI frequency to use (< 400000) + +Example: +adc@0 { + compatible = "ti,adc0832"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <200000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt new file mode 100644 index 000000000..4259e5062 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt @@ -0,0 +1,19 @@ +* Texas Instruments' ADC084S021 + +Required properties: + - compatible : Must be "ti,adc084s021" + - reg : SPI chip select number for the device + - vref-supply : The regulator supply for ADC reference voltage + - spi-cpol : Per spi-bus bindings + - spi-cpha : Per spi-bus bindings + - spi-max-frequency : Per spi-bus bindings + +Example: +adc@0 { + compatible = "ti,adc084s021"; + reg = <0>; + vref-supply = <&adc_vref>; + spi-cpol; + spi-cpha; + spi-max-frequency = <16000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt new file mode 100644 index 000000000..bbbbb4a9f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt @@ -0,0 +1,18 @@ +* Texas Instruments' ADC108S102 and ADC128S102 ADC chip + +Required properties: + - compatible: Should be "ti,adc108s102" + - reg: spi chip select number for the device + - vref-supply: The regulator supply for ADC reference voltage + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "ti,adc108s102"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt new file mode 100644 index 000000000..049a1d36f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt @@ -0,0 +1,37 @@ +* Texas Instruments' ADC12130/ADC12132/ADC12138 + +Required properties: + - compatible: Should be one of + * "ti,adc12130" + * "ti,adc12132" + * "ti,adc12138" + - reg: SPI chip select number for the device + - interrupts: Should contain interrupt for EOC (end of conversion) + - clocks: phandle to conversion clock input + - spi-max-frequency: Definision as per + Documentation/devicetree/bindings/spi/spi-bus.txt + - vref-p-supply: The regulator supply for positive analog voltage reference + +Optional properties: + - vref-n-supply: The regulator supply for negative analog voltage reference + (Note that this must not go below GND or exceed vref-p) + If not specified, this is assumed to be analog ground. + - ti,acquisition-time: The number of conversion clock periods for the S/H's + acquisition time. Should be one of 6, 10, 18, 34. If not specified, + default value of 10 is used. + For high source impedances, this value can be increased to 18 or 34. + For less ADC accuracy and/or slower CCLK frequencies this value may be + decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the + datasheet for details. + +Example: +adc@0 { + compatible = "ti,adc12138"; + reg = <0>; + interrupts = <28 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio1>; + clocks = <&cclk>; + vref-p-supply = <&ldo4_reg>; + spi-max-frequency = <5000000>; + ti,acquisition-time = <6>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt new file mode 100644 index 000000000..daa2b2c29 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt @@ -0,0 +1,18 @@ +* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip + +Required properties: + - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021" + - reg: spi chip select number for the device + - vref-supply: The regulator supply for ADC reference voltage + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "ti,adc128s052"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt new file mode 100644 index 000000000..3d25011f0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt @@ -0,0 +1,18 @@ +* Texas Instruments ADC141S626 and ADC161S626 chips + +Required properties: + - compatible: Should be "ti,adc141s626" or "ti,adc161s626" + - reg: spi chip select number for the device + - vdda-supply: supply voltage to VDDA pin + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "ti,adc161s626"; + vdda-supply = <&vdda_fixed>; + reg = <0>; + spi-max-frequency = <4300000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt new file mode 100644 index 000000000..e77a6f7e1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt @@ -0,0 +1,23 @@ +* Texas Instruments ADS7950 family of A/DC chips + +Required properties: + - compatible: Must be one of "ti,ads7950", "ti,ads7951", "ti,ads7952", + "ti,ads7953", "ti,ads7954", "ti,ads7955", "ti,ads7956", "ti,ads7957", + "ti,ads7958", "ti,ads7959", "ti,ads7960", or "ti,ads7961" + - reg: SPI chip select number for the device + - #io-channel-cells: Must be 1 as per ../iio-bindings.txt + - vref-supply: phandle to a regulator node that supplies the 2.5V or 5V + reference voltage + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "ti,ads7957"; + reg = <0>; + #io-channel-cells = <1>; + vref-supply = <&refin_supply>; + spi-max-frequency = <10000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt new file mode 100644 index 000000000..a02337d7e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt @@ -0,0 +1,20 @@ +* Texas Instruments' ADS8684 and ADS8688 ADC chip + +Required properties: + - compatible: Should be "ti,ads8684" or "ti,ads8688" + - reg: spi chip select number for the device + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: + - vref-supply: The regulator supply for ADC reference voltage + +Example: +adc@0 { + compatible = "ti,ads8688"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt b/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt new file mode 100644 index 000000000..6bdd21404 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt @@ -0,0 +1,24 @@ +* TWL4030 Monitoring Analog to Digital Converter (MADC) + +The MADC subsystem in the TWL4030 consists of a 10-bit ADC +combined with a 16-input analog multiplexer. + +Required properties: + - compatible: Should contain "ti,twl4030-madc". + - interrupts: IRQ line for the MADC submodule. + - #io-channel-cells: Should be set to <1>. + +Optional properties: + - ti,system-uses-second-madc-irq: boolean, set if the second madc irq register + should be used, which is intended to be used + by Co-Processors (e.g. a modem). + +Example: + +&twl { + madc { + compatible = "ti,twl4030-madc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt new file mode 100644 index 000000000..1aad0514e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt @@ -0,0 +1,36 @@ +Freescale vf610 Analog to Digital Converter bindings + +The devicetree bindings are for the new ADC driver written for +vf610/i.MX6slx and upward SoCs from Freescale. + +Required properties: +- compatible: Should contain "fsl,vf610-adc" +- reg: Offset and length of the register set for the device +- interrupts: Should contain the interrupt for the device +- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock. +- clock-names: Must contain "adc", matching entry in the clocks property. +- vref-supply: The regulator supply ADC reference voltage. + +Recommended properties: +- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating + requirements. Three values are required, depending on conversion mode: + - Frequency in normal mode (ADLPC=0, ADHSC=0) + - Frequency in high-speed mode (ADLPC=0, ADHSC=1) + - Frequency in low-power mode (ADLPC=1, ADHSC=0) +- min-sample-time: Minimum sampling time in nanoseconds. This value has + to be chosen according to the conversion mode and the connected analog + source resistance (R_as) and capacitance (C_as). Refer the datasheet's + operating requirements. A safe default across a wide range of R_as and + C_as as well as conversion modes is 1000ns. + +Example: +adc0: adc@4003b000 { + compatible = "fsl,vf610-adc"; + reg = <0x4003b000 0x1000>; + interrupts = <0 53 0x04>; + clocks = <&clks VF610_CLK_ADC0>; + clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; + vref-supply = <®_vcc_3v3_mcu>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt new file mode 100644 index 000000000..e0e0755ca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt @@ -0,0 +1,112 @@ +Xilinx XADC device driver + +This binding document describes the bindings for both of them since the +bindings are very similar. The Xilinx XADC is a ADC that can be found in the +series 7 FPGAs from Xilinx. The XADC has a DRP interface for communication. +Currently two different frontends for the DRP interface exist. One that is only +available on the ZYNQ family as a hardmacro in the SoC portion of the ZYNQ. The +other one is available on all series 7 platforms and is a softmacro with a AXI +interface. This binding document describes the bindings for both of them since +the bindings are very similar. + +Required properties: + - compatible: Should be one of + * "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device + configuration interface to interface to the XADC hardmacro. + * "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to + interface to the XADC hardmacro. + - reg: Address and length of the register set for the device + - interrupts: Interrupt for the XADC control interface. + - clocks: When using the ZYNQ this must be the ZYNQ PCAP clock, + when using the AXI-XADC pcore this must be the clock that provides the + clock to the AXI bus interface of the core. + +Optional properties: + - xlnx,external-mux: + * "none": No external multiplexer is used, this is the default + if the property is omitted. + * "single": External multiplexer mode is used with one + multiplexer. + * "dual": External multiplexer mode is used with two + multiplexers for simultaneous sampling. + - xlnx,external-mux-channel: Configures which pair of pins is used to + sample data in external mux mode. + Valid values for single external multiplexer mode are: + 0: VP/VN + 1: VAUXP[0]/VAUXN[0] + 2: VAUXP[1]/VAUXN[1] + ... + 16: VAUXP[15]/VAUXN[15] + Valid values for dual external multiplexer mode are: + 1: VAUXP[0]/VAUXN[0] - VAUXP[8]/VAUXN[8] + 2: VAUXP[1]/VAUXN[1] - VAUXP[9]/VAUXN[9] + ... + 8: VAUXP[7]/VAUXN[7] - VAUXP[15]/VAUXN[15] + + This property needs to be present if the device is configured for + external multiplexer mode (either single or dual). If the device is + not using external multiplexer mode the property is ignored. + - xnlx,channels: List of external channels that are connected to the ADC + Required properties: + * #address-cells: Should be 1. + * #size-cells: Should be 0. + + The child nodes of this node represent the external channels which are + connected to the ADC. If the property is no present no external + channels will be assumed to be connected. + + Each child node represents one channel and has the following + properties: + Required properties: + * reg: Pair of pins the channel is connected to. + 0: VP/VN + 1: VAUXP[0]/VAUXN[0] + 2: VAUXP[1]/VAUXN[1] + ... + 16: VAUXP[15]/VAUXN[15] + Note each channel number should only be used at most + once. + Optional properties: + * xlnx,bipolar: If set the channel is used in bipolar + mode. + + +Examples: + xadc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&gic>; + clocks = <&pcap_clk>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@8 { + reg = <8>; + }; + }; + }; + + xadc@43200000 { + compatible = "xlnx,axi-xadc-1.00.a"; + reg = <0x43200000 0x1000>; + interrupts = <0 53 4>; + interrupt-parent = <&gic>; + clocks = <&fpga1_clk>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + xlnx,bipolar; + }; + }; + }; -- cgit v1.2.3