From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- .../bindings/interrupt-controller/qcom,pdc.txt | 72 ++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt (limited to 'Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt') diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt new file mode 100644 index 000000000..8e0797cb1 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt @@ -0,0 +1,72 @@ +PDC interrupt controller + +Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a +Power Domain Controller (PDC) that is on always-on domain. In addition to +providing power control for the power domains, the hardware also has an +interrupt controller that can be used to help detect edge low interrupts as +well detect interrupts when the GIC is non-operational. + +GIC is parent interrupt controller at the highest level. Platform interrupt +controller PDC is next in hierarchy, followed by others. Drivers requiring +wakeup capabilities of their device interrupts routed through the PDC, must +specify PDC as their interrupt controller and request the PDC port associated +with the GIC interrupt. See example below. + +Properties: + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,-pdc" + - "qcom,sdm845-pdc": For SDM845 + +- reg: + Usage: required + Value type: + Definition: Specifies the base physical address for PDC hardware. + +- interrupt-cells: + Usage: required + Value type: + Definition: Specifies the number of cells needed to encode an interrupt + source. + Must be 2. + The first element of the tuple is the PDC pin for the + interrupt. + The second element is the trigger type. + +- interrupt-controller: + Usage: required + Value type: + Definition: Identifies the node as an interrupt controller. + +- qcom,pdc-ranges: + Usage: required + Value type: + Definition: Specifies the PDC pin offset and the number of PDC ports. + The tuples indicates the valid mapping of valid PDC ports + and their hwirq mapping. + The first element of the tuple is the starting PDC port. + The second element is the GIC hwirq number for the PDC port. + The third element is the number of interrupts in sequence. + +Example: + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc"; + reg = <0xb220000 0x30000>; + qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + +DT binding of a device that wants to use the GIC SPI 514 as a wakeup +interrupt, must do - + + wake-device { + interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>; + }; + +In this case interrupt 514 would be mapped to port 2 on the PDC as defined by +the qcom,pdc-ranges property. -- cgit v1.2.3