From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- .../bindings/phy/phy-rockchip-inno-usb2.txt | 78 ++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt (limited to 'Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt') diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt new file mode 100644 index 000000000..074a7b3b0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt @@ -0,0 +1,78 @@ +ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK + +Required properties (phy (parent) node): + - compatible : should be one of the listed compatibles: + * "rockchip,rk3228-usb2phy" + * "rockchip,rk3328-usb2phy" + * "rockchip,rk3366-usb2phy" + * "rockchip,rk3399-usb2phy" + * "rockchip,rv1108-usb2phy" + - reg : the address offset of grf for usb-phy configuration. + - #clock-cells : should be 0. + - clock-output-names : specify the 480m output clock name. + +Optional properties: + - clocks : phandle + phy specifier pair, for the input clock of phy. + - clock-names : input clock name of phy, must be "phyclk". + - assigned-clocks : phandle of usb 480m clock. + - assigned-clock-parents : parent of usb 480m clock, select between + usb-phy output 480m and xin24m. + Refer to clk/clock-bindings.txt for generic clock + consumer properties. + - rockchip,usbgrf : phandle to the syscon managing the "usb general + register files". When set driver will request its + phandle as one companion-grf for some special SoCs + (e.g RV1108). + +Required nodes : a sub-node is required for each port the phy provides. + The sub-node name is used to identify host or otg port, + and shall be the following entries: + * "otg-port" : the name of otg port. + * "host-port" : the name of host port. + +Required properties (port (child) node): + - #phy-cells : must be 0. See ./phy-bindings.txt for details. + - interrupts : specify an interrupt for each entry in interrupt-names. + - interrupt-names : a list which should be one of the following cases: + Regular case: + * "otg-id" : for the otg id interrupt. + * "otg-bvalid" : for the otg vbus interrupt. + * "linestate" : for the host/otg linestate interrupt. + Some SoCs use one interrupt with the above muxed together, so for these + * "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate + to one. + +Optional properties: + - phy-supply : phandle to a regulator that provides power to VBUS. + See ./phy-bindings.txt for details. + +Example: + +grf: syscon@ff770000 { + compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + +... + + u2phy: usb2-phy@700 { + compatible = "rockchip,rk3366-usb2phy"; + reg = <0x700 0x2c>; + #clock-cells = <0>; + clock-output-names = "sclk_otgphy0_480m"; + + u2phy_otg: otg-port { + #phy-cells = <0>; + interrupts = , + , + ; + interrupt-names = "otg-id", "otg-bvalid", "linestate"; + }; + + u2phy_host: host-port { + #phy-cells = <0>; + interrupts = ; + interrupt-names = "linestate"; + }; + }; +}; -- cgit v1.2.3