From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/timer/renesas,cmt.txt | 76 ++++++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/renesas,cmt.txt (limited to 'Documentation/devicetree/bindings/timer/renesas,cmt.txt') diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt new file mode 100644 index 000000000..b40add2d9 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -0,0 +1,76 @@ +* Renesas R-Car Compare Match Timer (CMT) + +The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock +inputs and programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. A particular CMT instance can implement only a subset of the +channels supported by the CMT model. Channel indices represent the hardware +position of the channel in the CMT and don't match the channel numbers in the +datasheets. + +Required Properties: + + - compatible: must contain one or more of the following: + - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT + (CMT1) + - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT + (CMT1) + - "renesas,cmt-48" for all non-second generation 48-bit CMT + (CMT1 on sh73a0 and r8a7740) + This is a fallback for the above renesas,cmt-48-* entries. + + - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4. + - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4. + - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743. + - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743. + - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745. + - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745. + - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. + - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. + - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. + - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791. + - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793. + - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. + - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. + - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. + + - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2 + and RZ/G1. + - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2 + and RZ/G1. + These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries + listed above. + + - reg: base address and length of the registers block for the timer module. + - interrupts: interrupt-specifier for the timer, one per channel. + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + + +Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_CMT0>; + clock-names = "fck"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_CMT1>; + clock-names = "fck"; + }; -- cgit v1.2.3