From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- arch/mips/pmcs-msp71xx/msp_eth.c | 111 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 arch/mips/pmcs-msp71xx/msp_eth.c (limited to 'arch/mips/pmcs-msp71xx/msp_eth.c') diff --git a/arch/mips/pmcs-msp71xx/msp_eth.c b/arch/mips/pmcs-msp71xx/msp_eth.c new file mode 100644 index 000000000..15679b427 --- /dev/null +++ b/arch/mips/pmcs-msp71xx/msp_eth.c @@ -0,0 +1,111 @@ +/* + * The setup file for ethernet related hardware on PMC-Sierra MSP processors. + * + * Copyright 2010 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +#define MSP_ETHERNET_GPIO0 14 +#define MSP_ETHERNET_GPIO1 15 +#define MSP_ETHERNET_GPIO2 16 + +#define MSP_ETH_ID "pmc_mspeth" +#define MSP_ETH_SIZE 0xE0 +static struct resource msp_eth0_resources[] = { + [0] = { + .start = MSP_MAC0_BASE, + .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC0, + .end = MSP_INT_MAC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msp_eth1_resources[] = { + [0] = { + .start = MSP_MAC1_BASE, + .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC1, + .end = MSP_INT_MAC1, + .flags = IORESOURCE_IRQ, + }, +}; + + + +static struct platform_device mspeth_device[] = { + [0] = { + .name = MSP_ETH_ID, + .id = 0, + .num_resources = ARRAY_SIZE(msp_eth0_resources), + .resource = msp_eth0_resources, + }, + [1] = { + .name = MSP_ETH_ID, + .id = 1, + .num_resources = ARRAY_SIZE(msp_eth1_resources), + .resource = msp_eth1_resources, + }, + +}; +#define msp_eth_devs mspeth_device + +int __init msp_eth_setup(void) +{ + int i, ret = 0; + + /* Configure the GPIO and take the ethernet PHY out of reset */ + msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0); + msp_gpio_pin_hi(MSP_ETHERNET_GPIO0); + + for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) { + ret = platform_device_register(&msp_eth_devs[i]); + printk(KERN_INFO "device: %d, return value = %d\n", i, ret); + if (ret) { + platform_device_unregister(&msp_eth_devs[i]); + break; + } + } + + if (ret) + printk(KERN_WARNING "Could not initialize " + "MSPETH device structures.\n"); + + return ret; +} +subsys_initcall(msp_eth_setup); -- cgit v1.2.3