From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/iio/accel/mma9551_core.c | 810 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 810 insertions(+) create mode 100644 drivers/iio/accel/mma9551_core.c (limited to 'drivers/iio/accel/mma9551_core.c') diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c new file mode 100644 index 000000000..c34c5ce81 --- /dev/null +++ b/drivers/iio/accel/mma9551_core.c @@ -0,0 +1,810 @@ +/* + * Common code for Freescale MMA955x Intelligent Sensor Platform drivers + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include "mma9551_core.h" + +/* Command masks for mailbox write command */ +#define MMA9551_CMD_READ_VERSION_INFO 0x00 +#define MMA9551_CMD_READ_CONFIG 0x10 +#define MMA9551_CMD_WRITE_CONFIG 0x20 +#define MMA9551_CMD_READ_STATUS 0x30 + +/* Mailbox read command */ +#define MMA9551_RESPONSE_COCO BIT(7) + +/* Error-Status codes returned in mailbox read command */ +#define MMA9551_MCI_ERROR_NONE 0x00 +#define MMA9551_MCI_ERROR_PARAM 0x04 +#define MMA9551_MCI_INVALID_COUNT 0x19 +#define MMA9551_MCI_ERROR_COMMAND 0x1C +#define MMA9551_MCI_ERROR_INVALID_LENGTH 0x21 +#define MMA9551_MCI_ERROR_FIFO_BUSY 0x22 +#define MMA9551_MCI_ERROR_FIFO_ALLOCATED 0x23 +#define MMA9551_MCI_ERROR_FIFO_OVERSIZE 0x24 + +/* GPIO Application */ +#define MMA9551_GPIO_POL_MSB 0x08 +#define MMA9551_GPIO_POL_LSB 0x09 + +/* Sleep/Wake application */ +#define MMA9551_SLEEP_CFG 0x06 +#define MMA9551_SLEEP_CFG_SNCEN BIT(0) +#define MMA9551_SLEEP_CFG_FLEEN BIT(1) +#define MMA9551_SLEEP_CFG_SCHEN BIT(2) + +/* AFE application */ +#define MMA9551_AFE_X_ACCEL_REG 0x00 +#define MMA9551_AFE_Y_ACCEL_REG 0x02 +#define MMA9551_AFE_Z_ACCEL_REG 0x04 + +/* Reset/Suspend/Clear application */ +#define MMA9551_RSC_RESET 0x00 +#define MMA9551_RSC_OFFSET(mask) (3 - (ffs(mask) - 1) / 8) +#define MMA9551_RSC_VAL(mask) (mask >> (((ffs(mask) - 1) / 8) * 8)) + +/* + * A response is composed of: + * - control registers: MB0-3 + * - data registers: MB4-31 + * + * A request is composed of: + * - mbox to write to (always 0) + * - control registers: MB1-4 + * - data registers: MB5-31 + */ +#define MMA9551_MAILBOX_CTRL_REGS 4 +#define MMA9551_MAX_MAILBOX_DATA_REGS 28 +#define MMA9551_MAILBOX_REGS 32 + +#define MMA9551_I2C_READ_RETRIES 5 +#define MMA9551_I2C_READ_DELAY 50 /* us */ + +struct mma9551_mbox_request { + u8 start_mbox; /* Always 0. */ + u8 app_id; + /* + * See Section 5.3.1 of the MMA955xL Software Reference Manual. + * + * Bit 7: reserved, always 0 + * Bits 6-4: command + * Bits 3-0: upper bits of register offset + */ + u8 cmd_off; + u8 lower_off; + u8 nbytes; + u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS - 1]; +} __packed; + +struct mma9551_mbox_response { + u8 app_id; + /* + * See Section 5.3.3 of the MMA955xL Software Reference Manual. + * + * Bit 7: COCO + * Bits 6-0: Error code. + */ + u8 coco_err; + u8 nbytes; + u8 req_bytes; + u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS]; +} __packed; + +struct mma9551_version_info { + __be32 device_id; + u8 rom_version[2]; + u8 fw_version[2]; + u8 hw_version[2]; + u8 fw_build[2]; +}; + +static int mma9551_transfer(struct i2c_client *client, + u8 app_id, u8 command, u16 offset, + u8 *inbytes, int num_inbytes, + u8 *outbytes, int num_outbytes) +{ + struct mma9551_mbox_request req; + struct mma9551_mbox_response rsp; + struct i2c_msg in, out; + u8 req_len, err_code; + int ret, retries; + + if (offset >= 1 << 12) { + dev_err(&client->dev, "register offset too large\n"); + return -EINVAL; + } + + req_len = 1 + MMA9551_MAILBOX_CTRL_REGS + num_inbytes; + req.start_mbox = 0; + req.app_id = app_id; + req.cmd_off = command | (offset >> 8); + req.lower_off = offset; + + if (command == MMA9551_CMD_WRITE_CONFIG) + req.nbytes = num_inbytes; + else + req.nbytes = num_outbytes; + if (num_inbytes) + memcpy(req.buf, inbytes, num_inbytes); + + out.addr = client->addr; + out.flags = 0; + out.len = req_len; + out.buf = (u8 *)&req; + + ret = i2c_transfer(client->adapter, &out, 1); + if (ret < 0) { + dev_err(&client->dev, "i2c write failed\n"); + return ret; + } + + retries = MMA9551_I2C_READ_RETRIES; + do { + udelay(MMA9551_I2C_READ_DELAY); + + in.addr = client->addr; + in.flags = I2C_M_RD; + in.len = sizeof(rsp); + in.buf = (u8 *)&rsp; + + ret = i2c_transfer(client->adapter, &in, 1); + if (ret < 0) { + dev_err(&client->dev, "i2c read failed\n"); + return ret; + } + + if (rsp.coco_err & MMA9551_RESPONSE_COCO) + break; + } while (--retries > 0); + + if (retries == 0) { + dev_err(&client->dev, + "timed out while waiting for command response\n"); + return -ETIMEDOUT; + } + + if (rsp.app_id != app_id) { + dev_err(&client->dev, + "app_id mismatch in response got %02x expected %02x\n", + rsp.app_id, app_id); + return -EINVAL; + } + + err_code = rsp.coco_err & ~MMA9551_RESPONSE_COCO; + if (err_code != MMA9551_MCI_ERROR_NONE) { + dev_err(&client->dev, "read returned error %x\n", err_code); + return -EINVAL; + } + + if (rsp.nbytes != rsp.req_bytes) { + dev_err(&client->dev, + "output length mismatch got %d expected %d\n", + rsp.nbytes, rsp.req_bytes); + return -EINVAL; + } + + if (num_outbytes) + memcpy(outbytes, rsp.buf, num_outbytes); + + return 0; +} + +/** + * mma9551_read_config_byte() - read 1 configuration byte + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Pointer to store value read + * + * Read one configuration byte from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed + * by one or more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_config_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 *val) +{ + return mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, + reg, NULL, 0, val, 1); +} +EXPORT_SYMBOL(mma9551_read_config_byte); + +/** + * mma9551_write_config_byte() - write 1 configuration byte + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Value to write + * + * Write one configuration byte from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed by one or + * more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_write_config_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 val) +{ + return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg, + &val, 1, NULL, 0); +} +EXPORT_SYMBOL(mma9551_write_config_byte); + +/** + * mma9551_read_status_byte() - read 1 status byte + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Pointer to store value read + * + * Read one status byte from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed by one or + * more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_status_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 *val) +{ + return mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, + reg, NULL, 0, val, 1); +} +EXPORT_SYMBOL(mma9551_read_status_byte); + +/** + * mma9551_read_config_word() - read 1 config word + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Pointer to store value read + * + * Read one configuration word from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed by one or + * more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_config_word(struct i2c_client *client, u8 app_id, + u16 reg, u16 *val) +{ + int ret; + __be16 v; + + ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, + reg, NULL, 0, (u8 *)&v, 2); + *val = be16_to_cpu(v); + + return ret; +} +EXPORT_SYMBOL(mma9551_read_config_word); + +/** + * mma9551_write_config_word() - write 1 config word + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Value to write + * + * Write one configuration word from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed by one or + * more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_write_config_word(struct i2c_client *client, u8 app_id, + u16 reg, u16 val) +{ + __be16 v = cpu_to_be16(val); + + return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg, + (u8 *)&v, 2, NULL, 0); +} +EXPORT_SYMBOL(mma9551_write_config_word); + +/** + * mma9551_read_status_word() - read 1 status word + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Pointer to store value read + * + * Read one status word from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed by one or + * more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_status_word(struct i2c_client *client, u8 app_id, + u16 reg, u16 *val) +{ + int ret; + __be16 v; + + ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, + reg, NULL, 0, (u8 *)&v, 2); + *val = be16_to_cpu(v); + + return ret; +} +EXPORT_SYMBOL(mma9551_read_status_word); + +/** + * mma9551_read_config_words() - read multiple config words + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @len: Length of array to read (in words) + * @buf: Array of words to read + * + * Read multiple configuration registers (word-sized registers). + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_config_words(struct i2c_client *client, u8 app_id, + u16 reg, u8 len, u16 *buf) +{ + int ret, i; + __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2]; + + if (len > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } + + ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, + reg, NULL, 0, (u8 *)be_buf, len * sizeof(u16)); + if (ret < 0) + return ret; + + for (i = 0; i < len; i++) + buf[i] = be16_to_cpu(be_buf[i]); + + return 0; +} +EXPORT_SYMBOL(mma9551_read_config_words); + +/** + * mma9551_read_status_words() - read multiple status words + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @len: Length of array to read (in words) + * @buf: Array of words to read + * + * Read multiple status registers (word-sized registers). + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_status_words(struct i2c_client *client, u8 app_id, + u16 reg, u8 len, u16 *buf) +{ + int ret, i; + __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2]; + + if (len > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } + + ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, + reg, NULL, 0, (u8 *)be_buf, len * sizeof(u16)); + if (ret < 0) + return ret; + + for (i = 0; i < len; i++) + buf[i] = be16_to_cpu(be_buf[i]); + + return 0; +} +EXPORT_SYMBOL(mma9551_read_status_words); + +/** + * mma9551_write_config_words() - write multiple config words + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @len: Length of array to write (in words) + * @buf: Array of words to write + * + * Write multiple configuration registers (word-sized registers). + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_write_config_words(struct i2c_client *client, u8 app_id, + u16 reg, u8 len, u16 *buf) +{ + int i; + __be16 be_buf[(MMA9551_MAX_MAILBOX_DATA_REGS - 1) / 2]; + + if (len > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } + + for (i = 0; i < len; i++) + be_buf[i] = cpu_to_be16(buf[i]); + + return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, + reg, (u8 *)be_buf, len * sizeof(u16), NULL, 0); +} +EXPORT_SYMBOL(mma9551_write_config_words); + +/** + * mma9551_update_config_bits() - update bits in register + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @mask: Mask for the bits to update + * @val: Value of the bits to update + * + * Update bits in the given register using a bit mask. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_update_config_bits(struct i2c_client *client, u8 app_id, + u16 reg, u8 mask, u8 val) +{ + int ret; + u8 tmp, orig; + + ret = mma9551_read_config_byte(client, app_id, reg, &orig); + if (ret < 0) + return ret; + + tmp = orig & ~mask; + tmp |= val & mask; + + if (tmp == orig) + return 0; + + return mma9551_write_config_byte(client, app_id, reg, tmp); +} +EXPORT_SYMBOL(mma9551_update_config_bits); + +/** + * mma9551_gpio_config() - configure gpio + * @client: I2C client + * @pin: GPIO pin to configure + * @app_id: Application ID + * @bitnum: Bit number of status register being assigned to the GPIO pin. + * @polarity: The polarity parameter is described in section 6.2.2, page 66, + * of the Software Reference Manual. Basically, polarity=0 means + * the interrupt line has the same value as the selected bit, + * while polarity=1 means the line is inverted. + * + * Assign a bit from an application’s status register to a specific GPIO pin. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_gpio_config(struct i2c_client *client, enum mma9551_gpio_pin pin, + u8 app_id, u8 bitnum, int polarity) +{ + u8 reg, pol_mask, pol_val; + int ret; + + if (pin > mma9551_gpio_max) { + dev_err(&client->dev, "bad GPIO pin\n"); + return -EINVAL; + } + + /* + * Pin 6 is configured by regs 0x00 and 0x01, pin 7 by 0x02 and + * 0x03, and so on. + */ + reg = pin * 2; + + ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO, + reg, app_id); + if (ret < 0) { + dev_err(&client->dev, "error setting GPIO app_id\n"); + return ret; + } + + ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO, + reg + 1, bitnum); + if (ret < 0) { + dev_err(&client->dev, "error setting GPIO bit number\n"); + return ret; + } + + switch (pin) { + case mma9551_gpio6: + reg = MMA9551_GPIO_POL_LSB; + pol_mask = 1 << 6; + break; + case mma9551_gpio7: + reg = MMA9551_GPIO_POL_LSB; + pol_mask = 1 << 7; + break; + case mma9551_gpio8: + reg = MMA9551_GPIO_POL_MSB; + pol_mask = 1 << 0; + break; + case mma9551_gpio9: + reg = MMA9551_GPIO_POL_MSB; + pol_mask = 1 << 1; + break; + } + pol_val = polarity ? pol_mask : 0; + + ret = mma9551_update_config_bits(client, MMA9551_APPID_GPIO, reg, + pol_mask, pol_val); + if (ret < 0) + dev_err(&client->dev, "error setting GPIO polarity\n"); + + return ret; +} +EXPORT_SYMBOL(mma9551_gpio_config); + +/** + * mma9551_read_version() - read device version information + * @client: I2C client + * + * Read version information and print device id and firmware version. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_version(struct i2c_client *client) +{ + struct mma9551_version_info info; + int ret; + + ret = mma9551_transfer(client, MMA9551_APPID_VERSION, 0x00, 0x00, + NULL, 0, (u8 *)&info, sizeof(info)); + if (ret < 0) + return ret; + + dev_info(&client->dev, "device ID 0x%x, firmware version %02x.%02x\n", + be32_to_cpu(info.device_id), info.fw_version[0], + info.fw_version[1]); + + return 0; +} +EXPORT_SYMBOL(mma9551_read_version); + +/** + * mma9551_set_device_state() - sets HW power mode + * @client: I2C client + * @enable: Use true to power on device, false to cause the device + * to enter sleep. + * + * Set power on/off for device using the Sleep/Wake Application. + * When enable is true, power on chip and enable doze mode. + * When enable is false, enter sleep mode (device remains in the + * lowest-power mode). + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_set_device_state(struct i2c_client *client, bool enable) +{ + return mma9551_update_config_bits(client, MMA9551_APPID_SLEEP_WAKE, + MMA9551_SLEEP_CFG, + MMA9551_SLEEP_CFG_SNCEN | + MMA9551_SLEEP_CFG_FLEEN | + MMA9551_SLEEP_CFG_SCHEN, + enable ? MMA9551_SLEEP_CFG_SCHEN | + MMA9551_SLEEP_CFG_FLEEN : + MMA9551_SLEEP_CFG_SNCEN); +} +EXPORT_SYMBOL(mma9551_set_device_state); + +/** + * mma9551_set_power_state() - sets runtime PM state + * @client: I2C client + * @on: Use true to power on device, false to power off + * + * Resume or suspend the device using Runtime PM. + * The device will suspend after the autosuspend delay. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_set_power_state(struct i2c_client *client, bool on) +{ +#ifdef CONFIG_PM + int ret; + + if (on) + ret = pm_runtime_get_sync(&client->dev); + else { + pm_runtime_mark_last_busy(&client->dev); + ret = pm_runtime_put_autosuspend(&client->dev); + } + + if (ret < 0) { + dev_err(&client->dev, + "failed to change power state to %d\n", on); + if (on) + pm_runtime_put_noidle(&client->dev); + + return ret; + } +#endif + + return 0; +} +EXPORT_SYMBOL(mma9551_set_power_state); + +/** + * mma9551_sleep() - sleep + * @freq: Application frequency + * + * Firmware applications run at a certain frequency on the + * device. Sleep for one application cycle to make sure the + * application had time to run once and initialize set values. + */ +void mma9551_sleep(int freq) +{ + int sleep_val = 1000 / freq; + + if (sleep_val < 20) + usleep_range(sleep_val * 1000, 20000); + else + msleep_interruptible(sleep_val); +} +EXPORT_SYMBOL(mma9551_sleep); + +/** + * mma9551_read_accel_chan() - read accelerometer channel + * @client: I2C client + * @chan: IIO channel + * @val: Pointer to the accelerometer value read + * @val2: Unused + * + * Read accelerometer value for the specified channel. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: IIO_VAL_INT on success, negative value on failure. + */ +int mma9551_read_accel_chan(struct i2c_client *client, + const struct iio_chan_spec *chan, + int *val, int *val2) +{ + u16 reg_addr; + s16 raw_accel; + int ret; + + switch (chan->channel2) { + case IIO_MOD_X: + reg_addr = MMA9551_AFE_X_ACCEL_REG; + break; + case IIO_MOD_Y: + reg_addr = MMA9551_AFE_Y_ACCEL_REG; + break; + case IIO_MOD_Z: + reg_addr = MMA9551_AFE_Z_ACCEL_REG; + break; + default: + return -EINVAL; + } + + ret = mma9551_set_power_state(client, true); + if (ret < 0) + return ret; + + ret = mma9551_read_status_word(client, MMA9551_APPID_AFE, + reg_addr, &raw_accel); + if (ret < 0) + goto out_poweroff; + + *val = raw_accel; + + ret = IIO_VAL_INT; + +out_poweroff: + mma9551_set_power_state(client, false); + return ret; +} +EXPORT_SYMBOL(mma9551_read_accel_chan); + +/** + * mma9551_read_accel_scale() - read accelerometer scale + * @val: Pointer to the accelerometer scale (int value) + * @val2: Pointer to the accelerometer scale (micro value) + * + * Read accelerometer scale. + * + * Returns: IIO_VAL_INT_PLUS_MICRO. + */ +int mma9551_read_accel_scale(int *val, int *val2) +{ + *val = 0; + *val2 = 2440; + + return IIO_VAL_INT_PLUS_MICRO; +} +EXPORT_SYMBOL(mma9551_read_accel_scale); + +/** + * mma9551_app_reset() - reset application + * @client: I2C client + * @app_mask: Application to reset + * + * Reset the given application (using the Reset/Suspend/Clear + * Control Application) + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_app_reset(struct i2c_client *client, u32 app_mask) +{ + return mma9551_write_config_byte(client, MMA9551_APPID_RSC, + MMA9551_RSC_RESET + + MMA9551_RSC_OFFSET(app_mask), + MMA9551_RSC_VAL(app_mask)); +} +EXPORT_SYMBOL(mma9551_app_reset); + +MODULE_AUTHOR("Irina Tirdea "); +MODULE_AUTHOR("Vlad Dogaru "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MMA955xL sensors core"); -- cgit v1.2.3