From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/nfc/microread/Kconfig | 31 ++ drivers/nfc/microread/Makefile | 11 + drivers/nfc/microread/i2c.c | 315 ++++++++++++++++ drivers/nfc/microread/mei.c | 88 +++++ drivers/nfc/microread/microread.c | 734 ++++++++++++++++++++++++++++++++++++++ drivers/nfc/microread/microread.h | 31 ++ 6 files changed, 1210 insertions(+) create mode 100644 drivers/nfc/microread/Kconfig create mode 100644 drivers/nfc/microread/Makefile create mode 100644 drivers/nfc/microread/i2c.c create mode 100644 drivers/nfc/microread/mei.c create mode 100644 drivers/nfc/microread/microread.c create mode 100644 drivers/nfc/microread/microread.h (limited to 'drivers/nfc/microread') diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig new file mode 100644 index 000000000..2c6dbc9f6 --- /dev/null +++ b/drivers/nfc/microread/Kconfig @@ -0,0 +1,31 @@ +config NFC_MICROREAD + tristate + select CRC_CCITT + ---help--- + This module contains the main code for Inside Secure microread + NFC chipsets. It implements the chipset HCI logic and hooks into + the NFC kernel APIs. Physical layers will register against it. + +config NFC_MICROREAD_I2C + tristate "Inside Secure Microread device support (I2C)" + depends on NFC_HCI && I2C && NFC_SHDLC + select NFC_MICROREAD + ---help--- + This module adds support for the i2c interface of adapters using + Inside microread chipsets. Select this if your platform is using + the i2c bus. + + If you choose to build a module, it'll be called microread_i2c. + Say N if unsure. + +config NFC_MICROREAD_MEI + tristate "Inside Secure Microread device support (MEI)" + depends on NFC_HCI && NFC_MEI_PHY + select NFC_MICROREAD + ---help--- + This module adds support for the mei interface of adapters using + Inside microread chipsets. Select this if your microread chipset + is handled by Intel's Management Engine Interface on your platform. + + If you choose to build a module, it'll be called microread_mei. + Say N if unsure. diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile new file mode 100644 index 000000000..2f7dda265 --- /dev/null +++ b/drivers/nfc/microread/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for Microread HCI based NFC driver +# + +microread_i2c-objs = i2c.o +microread_mei-objs = mei.o + +obj-$(CONFIG_NFC_MICROREAD) += microread.o +obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o +obj-$(CONFIG_NFC_MICROREAD_MEI) += microread_mei.o diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c new file mode 100644 index 000000000..1806d20a5 --- /dev/null +++ b/drivers/nfc/microread/i2c.c @@ -0,0 +1,315 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip - i2c layer + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "microread.h" + +#define MICROREAD_I2C_DRIVER_NAME "microread" + +#define MICROREAD_I2C_FRAME_HEADROOM 1 +#define MICROREAD_I2C_FRAME_TAILROOM 1 + +/* framing in HCI mode */ +#define MICROREAD_I2C_LLC_LEN 1 +#define MICROREAD_I2C_LLC_CRC 1 +#define MICROREAD_I2C_LLC_LEN_CRC (MICROREAD_I2C_LLC_LEN + \ + MICROREAD_I2C_LLC_CRC) +#define MICROREAD_I2C_LLC_MIN_SIZE (1 + MICROREAD_I2C_LLC_LEN_CRC) +#define MICROREAD_I2C_LLC_MAX_PAYLOAD 29 +#define MICROREAD_I2C_LLC_MAX_SIZE (MICROREAD_I2C_LLC_LEN_CRC + 1 + \ + MICROREAD_I2C_LLC_MAX_PAYLOAD) + +struct microread_i2c_phy { + struct i2c_client *i2c_dev; + struct nfc_hci_dev *hdev; + + int hard_fault; /* + * < 0 if hardware error occured (e.g. i2c err) + * and prevents normal operation. + */ +}; + +#define I2C_DUMP_SKB(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +static void microread_i2c_add_len_crc(struct sk_buff *skb) +{ + int i; + u8 crc = 0; + int len; + + len = skb->len; + *(u8 *)skb_push(skb, 1) = len; + + for (i = 0; i < skb->len; i++) + crc = crc ^ skb->data[i]; + + skb_put_u8(skb, crc); +} + +static void microread_i2c_remove_len_crc(struct sk_buff *skb) +{ + skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM); + skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM); +} + +static int check_crc(struct sk_buff *skb) +{ + int i; + u8 crc = 0; + + for (i = 0; i < skb->len - 1; i++) + crc = crc ^ skb->data[i]; + + if (crc != skb->data[skb->len-1]) { + pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]); + pr_info("%s: BAD CRC\n", __func__); + return -EPERM; + } + + return 0; +} + +static int microread_i2c_enable(void *phy_id) +{ + return 0; +} + +static void microread_i2c_disable(void *phy_id) +{ + return; +} + +static int microread_i2c_write(void *phy_id, struct sk_buff *skb) +{ + int r; + struct microread_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + + if (phy->hard_fault != 0) + return phy->hard_fault; + + usleep_range(3000, 6000); + + microread_i2c_add_len_crc(skb); + + I2C_DUMP_SKB("i2c frame written", skb); + + r = i2c_master_send(client, skb->data, skb->len); + + if (r == -EREMOTEIO) { /* Retry, chip was in standby */ + usleep_range(6000, 10000); + r = i2c_master_send(client, skb->data, skb->len); + } + + if (r >= 0) { + if (r != skb->len) + r = -EREMOTEIO; + else + r = 0; + } + + microread_i2c_remove_len_crc(skb); + + return r; +} + + +static int microread_i2c_read(struct microread_i2c_phy *phy, + struct sk_buff **skb) +{ + int r; + u8 len; + u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1]; + struct i2c_client *client = phy->i2c_dev; + + r = i2c_master_recv(client, &len, 1); + if (r != 1) { + nfc_err(&client->dev, "cannot read len byte\n"); + return -EREMOTEIO; + } + + if ((len < MICROREAD_I2C_LLC_MIN_SIZE) || + (len > MICROREAD_I2C_LLC_MAX_SIZE)) { + nfc_err(&client->dev, "invalid len byte\n"); + r = -EBADMSG; + goto flush; + } + + *skb = alloc_skb(1 + len, GFP_KERNEL); + if (*skb == NULL) { + r = -ENOMEM; + goto flush; + } + + skb_put_u8(*skb, len); + + r = i2c_master_recv(client, skb_put(*skb, len), len); + if (r != len) { + kfree_skb(*skb); + return -EREMOTEIO; + } + + I2C_DUMP_SKB("cc frame read", *skb); + + r = check_crc(*skb); + if (r != 0) { + kfree_skb(*skb); + r = -EBADMSG; + goto flush; + } + + skb_pull(*skb, 1); + skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM); + + usleep_range(3000, 6000); + + return 0; + +flush: + if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) + r = -EREMOTEIO; + + usleep_range(3000, 6000); + + return r; +} + +static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct microread_i2c_phy *phy = phy_id; + struct sk_buff *skb = NULL; + int r; + + if (!phy || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + if (phy->hard_fault != 0) + return IRQ_HANDLED; + + r = microread_i2c_read(phy, &skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; + + nfc_hci_recv_frame(phy->hdev, NULL); + + return IRQ_HANDLED; + } else if ((r == -ENOMEM) || (r == -EBADMSG)) { + return IRQ_HANDLED; + } + + nfc_hci_recv_frame(phy->hdev, skb); + + return IRQ_HANDLED; +} + +static struct nfc_phy_ops i2c_phy_ops = { + .write = microread_i2c_write, + .enable = microread_i2c_enable, + .disable = microread_i2c_disable, +}; + +static int microread_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct microread_i2c_phy *phy; + int r; + + dev_dbg(&client->dev, "client %p\n", client); + + phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + i2c_set_clientdata(client, phy); + phy->i2c_dev = client; + + r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + MICROREAD_I2C_DRIVER_NAME, phy); + if (r) { + nfc_err(&client->dev, "Unable to register IRQ handler\n"); + return r; + } + + r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, + MICROREAD_I2C_FRAME_HEADROOM, + MICROREAD_I2C_FRAME_TAILROOM, + MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev); + if (r < 0) + goto err_irq; + + nfc_info(&client->dev, "Probed\n"); + + return 0; + +err_irq: + free_irq(client->irq, phy); + + return r; +} + +static int microread_i2c_remove(struct i2c_client *client) +{ + struct microread_i2c_phy *phy = i2c_get_clientdata(client); + + microread_remove(phy->hdev); + + free_irq(client->irq, phy); + + return 0; +} + +static const struct i2c_device_id microread_i2c_id[] = { + { MICROREAD_I2C_DRIVER_NAME, 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, microread_i2c_id); + +static struct i2c_driver microread_i2c_driver = { + .driver = { + .name = MICROREAD_I2C_DRIVER_NAME, + }, + .probe = microread_i2c_probe, + .remove = microread_i2c_remove, + .id_table = microread_i2c_id, +}; + +module_i2c_driver(microread_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c new file mode 100644 index 000000000..eb5eddf17 --- /dev/null +++ b/drivers/nfc/microread/mei.c @@ -0,0 +1,88 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include + +#include "../mei_phy.h" +#include "microread.h" + +#define MICROREAD_DRIVER_NAME "microread" + +static int microread_mei_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + struct nfc_mei_phy *phy; + int r; + + pr_info("Probing NFC microread\n"); + + phy = nfc_mei_phy_alloc(cldev); + if (!phy) { + pr_err("Cannot allocate memory for microread mei phy.\n"); + return -ENOMEM; + } + + r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME, + MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, + &phy->hdev); + if (r < 0) { + nfc_mei_phy_free(phy); + + return r; + } + + return 0; +} + +static int microread_mei_remove(struct mei_cl_device *cldev) +{ + struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev); + + microread_remove(phy->hdev); + + nfc_mei_phy_free(phy); + + return 0; +} + +static struct mei_cl_device_id microread_mei_tbl[] = { + { MICROREAD_DRIVER_NAME, MEI_NFC_UUID, MEI_CL_VERSION_ANY}, + + /* required last entry */ + { } +}; +MODULE_DEVICE_TABLE(mei, microread_mei_tbl); + +static struct mei_cl_driver microread_driver = { + .id_table = microread_mei_tbl, + .name = MICROREAD_DRIVER_NAME, + + .probe = microread_mei_probe, + .remove = microread_mei_remove, +}; + +module_mei_cl_driver(microread_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/microread/microread.c b/drivers/nfc/microread/microread.c new file mode 100644 index 000000000..e5d5d2d97 --- /dev/null +++ b/drivers/nfc/microread/microread.c @@ -0,0 +1,734 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "microread.h" + +/* Proprietary gates, events, commands and registers */ +/* Admin */ +#define MICROREAD_GATE_ID_ADM NFC_HCI_ADMIN_GATE +#define MICROREAD_GATE_ID_MGT 0x01 +#define MICROREAD_GATE_ID_OS 0x02 +#define MICROREAD_GATE_ID_TESTRF 0x03 +#define MICROREAD_GATE_ID_LOOPBACK NFC_HCI_LOOPBACK_GATE +#define MICROREAD_GATE_ID_IDT NFC_HCI_ID_MGMT_GATE +#define MICROREAD_GATE_ID_LMS NFC_HCI_LINK_MGMT_GATE + +/* Reader */ +#define MICROREAD_GATE_ID_MREAD_GEN 0x10 +#define MICROREAD_GATE_ID_MREAD_ISO_B NFC_HCI_RF_READER_B_GATE +#define MICROREAD_GATE_ID_MREAD_NFC_T1 0x12 +#define MICROREAD_GATE_ID_MREAD_ISO_A NFC_HCI_RF_READER_A_GATE +#define MICROREAD_GATE_ID_MREAD_NFC_T3 0x14 +#define MICROREAD_GATE_ID_MREAD_ISO_15_3 0x15 +#define MICROREAD_GATE_ID_MREAD_ISO_15_2 0x16 +#define MICROREAD_GATE_ID_MREAD_ISO_B_3 0x17 +#define MICROREAD_GATE_ID_MREAD_BPRIME 0x18 +#define MICROREAD_GATE_ID_MREAD_ISO_A_3 0x19 + +/* Card */ +#define MICROREAD_GATE_ID_MCARD_GEN 0x20 +#define MICROREAD_GATE_ID_MCARD_ISO_B 0x21 +#define MICROREAD_GATE_ID_MCARD_BPRIME 0x22 +#define MICROREAD_GATE_ID_MCARD_ISO_A 0x23 +#define MICROREAD_GATE_ID_MCARD_NFC_T3 0x24 +#define MICROREAD_GATE_ID_MCARD_ISO_15_3 0x25 +#define MICROREAD_GATE_ID_MCARD_ISO_15_2 0x26 +#define MICROREAD_GATE_ID_MCARD_ISO_B_2 0x27 +#define MICROREAD_GATE_ID_MCARD_ISO_CUSTOM 0x28 +#define MICROREAD_GATE_ID_SECURE_ELEMENT 0x2F + +/* P2P */ +#define MICROREAD_GATE_ID_P2P_GEN 0x30 +#define MICROREAD_GATE_ID_P2P_TARGET 0x31 +#define MICROREAD_PAR_P2P_TARGET_MODE 0x01 +#define MICROREAD_PAR_P2P_TARGET_GT 0x04 +#define MICROREAD_GATE_ID_P2P_INITIATOR 0x32 +#define MICROREAD_PAR_P2P_INITIATOR_GI 0x01 +#define MICROREAD_PAR_P2P_INITIATOR_GT 0x03 + +/* Those pipes are created/opened by default in the chip */ +#define MICROREAD_PIPE_ID_LMS 0x00 +#define MICROREAD_PIPE_ID_ADMIN 0x01 +#define MICROREAD_PIPE_ID_MGT 0x02 +#define MICROREAD_PIPE_ID_OS 0x03 +#define MICROREAD_PIPE_ID_HDS_LOOPBACK 0x04 +#define MICROREAD_PIPE_ID_HDS_IDT 0x05 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B 0x08 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_BPRIME 0x09 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_A 0x0A +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_3 0x0B +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_2 0x0C +#define MICROREAD_PIPE_ID_HDS_MCARD_NFC_T3 0x0D +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B_2 0x0E +#define MICROREAD_PIPE_ID_HDS_MCARD_CUSTOM 0x0F +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B 0x10 +#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1 0x11 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A 0x12 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_3 0x13 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_2 0x14 +#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3 0x15 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B_3 0x16 +#define MICROREAD_PIPE_ID_HDS_MREAD_BPRIME 0x17 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3 0x18 +#define MICROREAD_PIPE_ID_HDS_MREAD_GEN 0x1B +#define MICROREAD_PIPE_ID_HDS_STACKED_ELEMENT 0x1C +#define MICROREAD_PIPE_ID_HDS_INSTANCES 0x1D +#define MICROREAD_PIPE_ID_HDS_TESTRF 0x1E +#define MICROREAD_PIPE_ID_HDS_P2P_TARGET 0x1F +#define MICROREAD_PIPE_ID_HDS_P2P_INITIATOR 0x20 + +/* Events */ +#define MICROREAD_EVT_MREAD_DISCOVERY_OCCURED NFC_HCI_EVT_TARGET_DISCOVERED +#define MICROREAD_EVT_MREAD_CARD_FOUND 0x3D +#define MICROREAD_EMCF_A_ATQA 0 +#define MICROREAD_EMCF_A_SAK 2 +#define MICROREAD_EMCF_A_LEN 3 +#define MICROREAD_EMCF_A_UID 4 +#define MICROREAD_EMCF_A3_ATQA 0 +#define MICROREAD_EMCF_A3_SAK 2 +#define MICROREAD_EMCF_A3_LEN 3 +#define MICROREAD_EMCF_A3_UID 4 +#define MICROREAD_EMCF_B_UID 0 +#define MICROREAD_EMCF_T1_ATQA 0 +#define MICROREAD_EMCF_T1_UID 4 +#define MICROREAD_EMCF_T3_UID 0 +#define MICROREAD_EVT_MREAD_DISCOVERY_START NFC_HCI_EVT_READER_REQUESTED +#define MICROREAD_EVT_MREAD_DISCOVERY_START_SOME 0x3E +#define MICROREAD_EVT_MREAD_DISCOVERY_STOP NFC_HCI_EVT_END_OPERATION +#define MICROREAD_EVT_MREAD_SIM_REQUESTS 0x3F +#define MICROREAD_EVT_MCARD_EXCHANGE NFC_HCI_EVT_TARGET_DISCOVERED +#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF 0x20 +#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF 0x21 +#define MICROREAD_EVT_MCARD_FIELD_ON 0x11 +#define MICROREAD_EVT_P2P_TARGET_ACTIVATED 0x13 +#define MICROREAD_EVT_P2P_TARGET_DEACTIVATED 0x12 +#define MICROREAD_EVT_MCARD_FIELD_OFF 0x14 + +/* Commands */ +#define MICROREAD_CMD_MREAD_EXCHANGE 0x10 +#define MICROREAD_CMD_MREAD_SUBSCRIBE 0x3F + +/* Hosts IDs */ +#define MICROREAD_ELT_ID_HDS NFC_HCI_TERMINAL_HOST_ID +#define MICROREAD_ELT_ID_SIM NFC_HCI_UICC_HOST_ID +#define MICROREAD_ELT_ID_SE1 0x03 +#define MICROREAD_ELT_ID_SE2 0x04 +#define MICROREAD_ELT_ID_SE3 0x05 + +static struct nfc_hci_gate microread_gates[] = { + {MICROREAD_GATE_ID_ADM, MICROREAD_PIPE_ID_ADMIN}, + {MICROREAD_GATE_ID_LOOPBACK, MICROREAD_PIPE_ID_HDS_LOOPBACK}, + {MICROREAD_GATE_ID_IDT, MICROREAD_PIPE_ID_HDS_IDT}, + {MICROREAD_GATE_ID_LMS, MICROREAD_PIPE_ID_LMS}, + {MICROREAD_GATE_ID_MREAD_ISO_B, MICROREAD_PIPE_ID_HDS_MREAD_ISO_B}, + {MICROREAD_GATE_ID_MREAD_ISO_A, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A}, + {MICROREAD_GATE_ID_MREAD_ISO_A_3, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3}, + {MICROREAD_GATE_ID_MGT, MICROREAD_PIPE_ID_MGT}, + {MICROREAD_GATE_ID_OS, MICROREAD_PIPE_ID_OS}, + {MICROREAD_GATE_ID_MREAD_NFC_T1, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1}, + {MICROREAD_GATE_ID_MREAD_NFC_T3, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3}, + {MICROREAD_GATE_ID_P2P_TARGET, MICROREAD_PIPE_ID_HDS_P2P_TARGET}, + {MICROREAD_GATE_ID_P2P_INITIATOR, MICROREAD_PIPE_ID_HDS_P2P_INITIATOR} +}; + +/* Largest headroom needed for outgoing custom commands */ +#define MICROREAD_CMDS_HEADROOM 2 +#define MICROREAD_CMD_TAILROOM 2 + +struct microread_info { + struct nfc_phy_ops *phy_ops; + void *phy_id; + + struct nfc_hci_dev *hdev; + + int async_cb_type; + data_exchange_cb_t async_cb; + void *async_cb_context; +}; + +static int microread_open(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->enable(info->phy_id); +} + +static void microread_close(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + info->phy_ops->disable(info->phy_id); +} + +static int microread_hci_ready(struct nfc_hci_dev *hdev) +{ + int r; + u8 param[4]; + + param[0] = 0x03; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 1, NULL); + if (r) + return r; + + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A_3, + MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL); + if (r) + return r; + + param[0] = 0x00; + param[1] = 0x03; + param[2] = 0x00; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_B, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 3, NULL); + if (r) + return r; + + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T1, + MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL); + if (r) + return r; + + param[0] = 0xFF; + param[1] = 0xFF; + param[2] = 0x00; + param[3] = 0x00; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T3, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 4, NULL); + + return r; +} + +static int microread_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->write(info->phy_id, skb); +} + +static int microread_start_poll(struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols) +{ + int r; + + u8 param[2]; + u8 mode; + + param[0] = 0x00; + param[1] = 0x00; + + if (im_protocols & NFC_PROTO_ISO14443_MASK) + param[0] |= (1 << 2); + + if (im_protocols & NFC_PROTO_ISO14443_B_MASK) + param[0] |= 1; + + if (im_protocols & NFC_PROTO_MIFARE_MASK) + param[1] |= 1; + + if (im_protocols & NFC_PROTO_JEWEL_MASK) + param[0] |= (1 << 1); + + if (im_protocols & NFC_PROTO_FELICA_MASK) + param[0] |= (1 << 5); + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) + param[1] |= (1 << 1); + + if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) { + hdev->gb = nfc_get_local_general_bytes(hdev->ndev, + &hdev->gb_len); + if (hdev->gb == NULL || hdev->gb_len == 0) { + im_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + } + } + + r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0); + if (r) + return r; + + mode = 0xff; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + return r; + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_INITIATOR, + MICROREAD_PAR_P2P_INITIATOR_GI, + hdev->gb, hdev->gb_len); + if (r) + return r; + } + + if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_GT, + hdev->gb, hdev->gb_len); + if (r) + return r; + + mode = 0x02; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + return r; + } + + return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_EVT_MREAD_DISCOVERY_START_SOME, + param, 2); +} + +static int microread_dep_link_up(struct nfc_hci_dev *hdev, + struct nfc_target *target, u8 comm_mode, + u8 *gb, size_t gb_len) +{ + struct sk_buff *rgb_skb = NULL; + int r; + + r = nfc_hci_get_param(hdev, target->hci_reader_gate, + MICROREAD_PAR_P2P_INITIATOR_GT, &rgb_skb); + if (r < 0) + return r; + + if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) { + r = -EPROTO; + goto exit; + } + + r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data, + rgb_skb->len); + if (r == 0) + r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode, + NFC_RF_INITIATOR); +exit: + kfree_skb(rgb_skb); + + return r; +} + +static int microread_dep_link_down(struct nfc_hci_dev *hdev) +{ + return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_INITIATOR, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0); +} + +static int microread_target_from_gate(struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target) +{ + switch (gate) { + case MICROREAD_GATE_ID_P2P_INITIATOR: + target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + break; + default: + return -EPROTO; + } + + return 0; +} + +static int microread_complete_target_discovered(struct nfc_hci_dev *hdev, + u8 gate, + struct nfc_target *target) +{ + return 0; +} + +#define MICROREAD_CB_TYPE_READER_ALL 1 + +static void microread_im_transceive_cb(void *context, struct sk_buff *skb, + int err) +{ + struct microread_info *info = context; + + switch (info->async_cb_type) { + case MICROREAD_CB_TYPE_READER_ALL: + if (err == 0) { + if (skb->len == 0) { + err = -EPROTO; + kfree_skb(skb); + info->async_cb(info->async_cb_context, NULL, + -EPROTO); + return; + } + + if (skb->data[skb->len - 1] != 0) { + err = nfc_hci_result_to_errno( + skb->data[skb->len - 1]); + kfree_skb(skb); + info->async_cb(info->async_cb_context, NULL, + err); + return; + } + + skb_trim(skb, skb->len - 1); /* RF Error ind. */ + } + info->async_cb(info->async_cb_context, skb, err); + break; + default: + if (err == 0) + kfree_skb(skb); + break; + } +} + +/* + * Returns: + * <= 0: driver handled the data exchange + * 1: driver doesn't especially handle, please do standard processing + */ +static int microread_im_transceive(struct nfc_hci_dev *hdev, + struct nfc_target *target, + struct sk_buff *skb, data_exchange_cb_t cb, + void *cb_context) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + u8 control_bits; + u16 crc; + + pr_info("data exchange to gate 0x%x\n", target->hci_reader_gate); + + if (target->hci_reader_gate == MICROREAD_GATE_ID_P2P_INITIATOR) { + *(u8 *)skb_push(skb, 1) = 0; + + return nfc_hci_send_event(hdev, target->hci_reader_gate, + MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF, + skb->data, skb->len); + } + + switch (target->hci_reader_gate) { + case MICROREAD_GATE_ID_MREAD_ISO_A: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_ISO_A_3: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_ISO_B: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T1: + control_bits = 0x1B; + + crc = crc_ccitt(0xffff, skb->data, skb->len); + crc = ~crc; + skb_put_u8(skb, crc & 0xff); + skb_put_u8(skb, crc >> 8); + break; + case MICROREAD_GATE_ID_MREAD_NFC_T3: + control_bits = 0xDB; + break; + default: + pr_info("Abort im_transceive to invalid gate 0x%x\n", + target->hci_reader_gate); + return 1; + } + + *(u8 *)skb_push(skb, 1) = control_bits; + + info->async_cb_type = MICROREAD_CB_TYPE_READER_ALL; + info->async_cb = cb; + info->async_cb_context = cb_context; + + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + MICROREAD_CMD_MREAD_EXCHANGE, + skb->data, skb->len, + microread_im_transceive_cb, info); +} + +static int microread_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + int r; + + r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_EVT_MCARD_EXCHANGE, + skb->data, skb->len); + + kfree_skb(skb); + + return r; +} + +static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate, + struct sk_buff *skb) +{ + struct nfc_target *targets; + int r = 0; + + pr_info("target discovered to gate 0x%x\n", gate); + + targets = kzalloc(sizeof(struct nfc_target), GFP_KERNEL); + if (targets == NULL) { + r = -ENOMEM; + goto exit; + } + + targets->hci_reader_gate = gate; + + switch (gate) { + case MICROREAD_GATE_ID_MREAD_ISO_A: + targets->supported_protocols = + nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A_SAK]); + targets->sens_res = + be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]); + targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK]; + targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN]; + if (targets->nfcid1_len > sizeof(targets->nfcid1)) { + r = -EINVAL; + goto exit_free; + } + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID], + targets->nfcid1_len); + break; + case MICROREAD_GATE_ID_MREAD_ISO_A_3: + targets->supported_protocols = + nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A3_SAK]); + targets->sens_res = + be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]); + targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK]; + targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN]; + if (targets->nfcid1_len > sizeof(targets->nfcid1)) { + r = -EINVAL; + goto exit_free; + } + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID], + targets->nfcid1_len); + break; + case MICROREAD_GATE_ID_MREAD_ISO_B: + targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_B_UID], 4); + targets->nfcid1_len = 4; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T1: + targets->supported_protocols = NFC_PROTO_JEWEL_MASK; + targets->sens_res = + le16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_T1_ATQA]); + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T1_UID], 4); + targets->nfcid1_len = 4; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T3: + targets->supported_protocols = NFC_PROTO_FELICA_MASK; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T3_UID], 8); + targets->nfcid1_len = 8; + break; + default: + pr_info("discard target discovered to gate 0x%x\n", gate); + goto exit_free; + } + + r = nfc_targets_found(hdev->ndev, targets, 1); + +exit_free: + kfree(targets); + +exit: + kfree_skb(skb); + + if (r) + pr_err("Failed to handle discovered target err=%d\n", r); +} + +static int microread_event_received(struct nfc_hci_dev *hdev, u8 pipe, + u8 event, struct sk_buff *skb) +{ + int r; + u8 gate = hdev->pipes[pipe].gate; + u8 mode; + + pr_info("Microread received event 0x%x to gate 0x%x\n", event, gate); + + switch (event) { + case MICROREAD_EVT_MREAD_CARD_FOUND: + microread_target_discovered(hdev, gate, skb); + return 0; + + case MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF: + if (skb->len < 1) { + kfree_skb(skb); + return -EPROTO; + } + + if (skb->data[skb->len - 1]) { + kfree_skb(skb); + return -EIO; + } + + skb_trim(skb, skb->len - 1); + + r = nfc_tm_data_received(hdev->ndev, skb); + break; + + case MICROREAD_EVT_MCARD_FIELD_ON: + case MICROREAD_EVT_MCARD_FIELD_OFF: + kfree_skb(skb); + return 0; + + case MICROREAD_EVT_P2P_TARGET_ACTIVATED: + r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, + NFC_COMM_PASSIVE, skb->data, + skb->len); + + kfree_skb(skb); + break; + + case MICROREAD_EVT_MCARD_EXCHANGE: + if (skb->len < 1) { + kfree_skb(skb); + return -EPROTO; + } + + if (skb->data[skb->len-1]) { + kfree_skb(skb); + return -EIO; + } + + skb_trim(skb, skb->len - 1); + + r = nfc_tm_data_received(hdev->ndev, skb); + break; + + case MICROREAD_EVT_P2P_TARGET_DEACTIVATED: + kfree_skb(skb); + + mode = 0xff; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + break; + + r = nfc_hci_send_event(hdev, gate, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, + 0); + break; + + default: + return 1; + } + + return r; +} + +static struct nfc_hci_ops microread_hci_ops = { + .open = microread_open, + .close = microread_close, + .hci_ready = microread_hci_ready, + .xmit = microread_xmit, + .start_poll = microread_start_poll, + .dep_link_up = microread_dep_link_up, + .dep_link_down = microread_dep_link_down, + .target_from_gate = microread_target_from_gate, + .complete_target_discovered = microread_complete_target_discovered, + .im_transceive = microread_im_transceive, + .tm_send = microread_tm_send, + .check_presence = NULL, + .event_received = microread_event_received, +}; + +int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + struct nfc_hci_dev **hdev) +{ + struct microread_info *info; + unsigned long quirks = 0; + u32 protocols; + struct nfc_hci_init_data init_data; + int r; + + info = kzalloc(sizeof(struct microread_info), GFP_KERNEL); + if (!info) { + r = -ENOMEM; + goto err_info_alloc; + } + + info->phy_ops = phy_ops; + info->phy_id = phy_id; + + init_data.gate_count = ARRAY_SIZE(microread_gates); + memcpy(init_data.gates, microread_gates, sizeof(microread_gates)); + + strcpy(init_data.session_id, "MICROREA"); + + set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks); + + protocols = NFC_PROTO_JEWEL_MASK | + NFC_PROTO_MIFARE_MASK | + NFC_PROTO_FELICA_MASK | + NFC_PROTO_ISO14443_MASK | + NFC_PROTO_ISO14443_B_MASK | + NFC_PROTO_NFC_DEP_MASK; + + info->hdev = nfc_hci_allocate_device(µread_hci_ops, &init_data, + quirks, protocols, llc_name, + phy_headroom + + MICROREAD_CMDS_HEADROOM, + phy_tailroom + + MICROREAD_CMD_TAILROOM, + phy_payload); + if (!info->hdev) { + pr_err("Cannot allocate nfc hdev\n"); + r = -ENOMEM; + goto err_alloc_hdev; + } + + nfc_hci_set_clientdata(info->hdev, info); + + r = nfc_hci_register_device(info->hdev); + if (r) + goto err_regdev; + + *hdev = info->hdev; + + return 0; + +err_regdev: + nfc_hci_free_device(info->hdev); + +err_alloc_hdev: + kfree(info); + +err_info_alloc: + return r; +} +EXPORT_SYMBOL(microread_probe); + +void microread_remove(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + nfc_hci_unregister_device(hdev); + nfc_hci_free_device(hdev); + kfree(info); +} +EXPORT_SYMBOL(microread_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/microread/microread.h b/drivers/nfc/microread/microread.h new file mode 100644 index 000000000..f53864143 --- /dev/null +++ b/drivers/nfc/microread/microread.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2011 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#ifndef __LOCAL_MICROREAD_H_ +#define __LOCAL_MICROREAD_H_ + +#include + +#define DRIVER_DESC "NFC driver for microread" + +int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + struct nfc_hci_dev **hdev); + +void microread_remove(struct nfc_hci_dev *hdev); + +#endif /* __LOCAL_MICROREAD_H_ */ -- cgit v1.2.3