From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/thermal/imx_thermal.c | 917 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 917 insertions(+) create mode 100644 drivers/thermal/imx_thermal.c (limited to 'drivers/thermal/imx_thermal.c') diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c new file mode 100644 index 000000000..aa452acb6 --- /dev/null +++ b/drivers/thermal/imx_thermal.c @@ -0,0 +1,917 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_SET 0x4 +#define REG_CLR 0x8 +#define REG_TOG 0xc + +/* i.MX6 specific */ +#define IMX6_MISC0 0x0150 +#define IMX6_MISC0_REFTOP_SELBIASOFF (1 << 3) +#define IMX6_MISC1 0x0160 +#define IMX6_MISC1_IRQ_TEMPHIGH (1 << 29) +/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */ +#define IMX6_MISC1_IRQ_TEMPLOW (1 << 28) +#define IMX6_MISC1_IRQ_TEMPPANIC (1 << 27) + +#define IMX6_TEMPSENSE0 0x0180 +#define IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT 20 +#define IMX6_TEMPSENSE0_ALARM_VALUE_MASK (0xfff << 20) +#define IMX6_TEMPSENSE0_TEMP_CNT_SHIFT 8 +#define IMX6_TEMPSENSE0_TEMP_CNT_MASK (0xfff << 8) +#define IMX6_TEMPSENSE0_FINISHED (1 << 2) +#define IMX6_TEMPSENSE0_MEASURE_TEMP (1 << 1) +#define IMX6_TEMPSENSE0_POWER_DOWN (1 << 0) + +#define IMX6_TEMPSENSE1 0x0190 +#define IMX6_TEMPSENSE1_MEASURE_FREQ 0xffff +#define IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT 0 + +#define OCOTP_MEM0 0x0480 +#define OCOTP_ANA1 0x04e0 + +/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */ +#define IMX6_TEMPSENSE2 0x0290 +#define IMX6_TEMPSENSE2_LOW_VALUE_SHIFT 0 +#define IMX6_TEMPSENSE2_LOW_VALUE_MASK 0xfff +#define IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT 16 +#define IMX6_TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000 + +/* i.MX7 specific */ +#define IMX7_ANADIG_DIGPROG 0x800 +#define IMX7_TEMPSENSE0 0x300 +#define IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT 18 +#define IMX7_TEMPSENSE0_PANIC_ALARM_MASK (0x1ff << 18) +#define IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT 9 +#define IMX7_TEMPSENSE0_HIGH_ALARM_MASK (0x1ff << 9) +#define IMX7_TEMPSENSE0_LOW_ALARM_SHIFT 0 +#define IMX7_TEMPSENSE0_LOW_ALARM_MASK 0x1ff + +#define IMX7_TEMPSENSE1 0x310 +#define IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT 16 +#define IMX7_TEMPSENSE1_MEASURE_FREQ_MASK (0xffff << 16) +#define IMX7_TEMPSENSE1_FINISHED (1 << 11) +#define IMX7_TEMPSENSE1_MEASURE_TEMP (1 << 10) +#define IMX7_TEMPSENSE1_POWER_DOWN (1 << 9) +#define IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT 0 +#define IMX7_TEMPSENSE1_TEMP_VALUE_MASK 0x1ff + +/* The driver supports 1 passive trip point and 1 critical trip point */ +enum imx_thermal_trip { + IMX_TRIP_PASSIVE, + IMX_TRIP_CRITICAL, + IMX_TRIP_NUM, +}; + +#define IMX_POLLING_DELAY 2000 /* millisecond */ +#define IMX_PASSIVE_DELAY 1000 + +#define TEMPMON_IMX6Q 1 +#define TEMPMON_IMX6SX 2 +#define TEMPMON_IMX7D 3 + +struct thermal_soc_data { + u32 version; + + u32 sensor_ctrl; + u32 power_down_mask; + u32 measure_temp_mask; + + u32 measure_freq_ctrl; + u32 measure_freq_mask; + u32 measure_freq_shift; + + u32 temp_data; + u32 temp_value_mask; + u32 temp_value_shift; + u32 temp_valid_mask; + + u32 panic_alarm_ctrl; + u32 panic_alarm_mask; + u32 panic_alarm_shift; + + u32 high_alarm_ctrl; + u32 high_alarm_mask; + u32 high_alarm_shift; + + u32 low_alarm_ctrl; + u32 low_alarm_mask; + u32 low_alarm_shift; +}; + +static struct thermal_soc_data thermal_imx6q_data = { + .version = TEMPMON_IMX6Q, + + .sensor_ctrl = IMX6_TEMPSENSE0, + .power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN, + .measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP, + + .measure_freq_ctrl = IMX6_TEMPSENSE1, + .measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT, + .measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ, + + .temp_data = IMX6_TEMPSENSE0, + .temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK, + .temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT, + .temp_valid_mask = IMX6_TEMPSENSE0_FINISHED, + + .high_alarm_ctrl = IMX6_TEMPSENSE0, + .high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK, + .high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT, +}; + +static struct thermal_soc_data thermal_imx6sx_data = { + .version = TEMPMON_IMX6SX, + + .sensor_ctrl = IMX6_TEMPSENSE0, + .power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN, + .measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP, + + .measure_freq_ctrl = IMX6_TEMPSENSE1, + .measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT, + .measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ, + + .temp_data = IMX6_TEMPSENSE0, + .temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK, + .temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT, + .temp_valid_mask = IMX6_TEMPSENSE0_FINISHED, + + .high_alarm_ctrl = IMX6_TEMPSENSE0, + .high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK, + .high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT, + + .panic_alarm_ctrl = IMX6_TEMPSENSE2, + .panic_alarm_mask = IMX6_TEMPSENSE2_PANIC_VALUE_MASK, + .panic_alarm_shift = IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT, + + .low_alarm_ctrl = IMX6_TEMPSENSE2, + .low_alarm_mask = IMX6_TEMPSENSE2_LOW_VALUE_MASK, + .low_alarm_shift = IMX6_TEMPSENSE2_LOW_VALUE_SHIFT, +}; + +static struct thermal_soc_data thermal_imx7d_data = { + .version = TEMPMON_IMX7D, + + .sensor_ctrl = IMX7_TEMPSENSE1, + .power_down_mask = IMX7_TEMPSENSE1_POWER_DOWN, + .measure_temp_mask = IMX7_TEMPSENSE1_MEASURE_TEMP, + + .measure_freq_ctrl = IMX7_TEMPSENSE1, + .measure_freq_shift = IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT, + .measure_freq_mask = IMX7_TEMPSENSE1_MEASURE_FREQ_MASK, + + .temp_data = IMX7_TEMPSENSE1, + .temp_value_mask = IMX7_TEMPSENSE1_TEMP_VALUE_MASK, + .temp_value_shift = IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT, + .temp_valid_mask = IMX7_TEMPSENSE1_FINISHED, + + .panic_alarm_ctrl = IMX7_TEMPSENSE1, + .panic_alarm_mask = IMX7_TEMPSENSE0_PANIC_ALARM_MASK, + .panic_alarm_shift = IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT, + + .high_alarm_ctrl = IMX7_TEMPSENSE0, + .high_alarm_mask = IMX7_TEMPSENSE0_HIGH_ALARM_MASK, + .high_alarm_shift = IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT, + + .low_alarm_ctrl = IMX7_TEMPSENSE0, + .low_alarm_mask = IMX7_TEMPSENSE0_LOW_ALARM_MASK, + .low_alarm_shift = IMX7_TEMPSENSE0_LOW_ALARM_SHIFT, +}; + +struct imx_thermal_data { + struct cpufreq_policy *policy; + struct thermal_zone_device *tz; + struct thermal_cooling_device *cdev; + enum thermal_device_mode mode; + struct regmap *tempmon; + u32 c1, c2; /* See formula in imx_init_calib() */ + int temp_passive; + int temp_critical; + int temp_max; + int alarm_temp; + int last_temp; + bool irq_enabled; + int irq; + struct clk *thermal_clk; + const struct thermal_soc_data *socdata; + const char *temp_grade; +}; + +static void imx_set_panic_temp(struct imx_thermal_data *data, + int panic_temp) +{ + const struct thermal_soc_data *soc_data = data->socdata; + struct regmap *map = data->tempmon; + int critical_value; + + critical_value = (data->c2 - panic_temp) / data->c1; + + regmap_write(map, soc_data->panic_alarm_ctrl + REG_CLR, + soc_data->panic_alarm_mask); + regmap_write(map, soc_data->panic_alarm_ctrl + REG_SET, + critical_value << soc_data->panic_alarm_shift); +} + +static void imx_set_alarm_temp(struct imx_thermal_data *data, + int alarm_temp) +{ + struct regmap *map = data->tempmon; + const struct thermal_soc_data *soc_data = data->socdata; + int alarm_value; + + data->alarm_temp = alarm_temp; + + if (data->socdata->version == TEMPMON_IMX7D) + alarm_value = alarm_temp / 1000 + data->c1 - 25; + else + alarm_value = (data->c2 - alarm_temp) / data->c1; + + regmap_write(map, soc_data->high_alarm_ctrl + REG_CLR, + soc_data->high_alarm_mask); + regmap_write(map, soc_data->high_alarm_ctrl + REG_SET, + alarm_value << soc_data->high_alarm_shift); +} + +static int imx_get_temp(struct thermal_zone_device *tz, int *temp) +{ + struct imx_thermal_data *data = tz->devdata; + const struct thermal_soc_data *soc_data = data->socdata; + struct regmap *map = data->tempmon; + unsigned int n_meas; + bool wait; + u32 val; + + if (data->mode == THERMAL_DEVICE_ENABLED) { + /* Check if a measurement is currently in progress */ + regmap_read(map, soc_data->temp_data, &val); + wait = !(val & soc_data->temp_valid_mask); + } else { + /* + * Every time we measure the temperature, we will power on the + * temperature sensor, enable measurements, take a reading, + * disable measurements, power off the temperature sensor. + */ + regmap_write(map, soc_data->sensor_ctrl + REG_CLR, + soc_data->power_down_mask); + regmap_write(map, soc_data->sensor_ctrl + REG_SET, + soc_data->measure_temp_mask); + + wait = true; + } + + /* + * According to the temp sensor designers, it may require up to ~17us + * to complete a measurement. + */ + if (wait) + usleep_range(20, 50); + + regmap_read(map, soc_data->temp_data, &val); + + if (data->mode != THERMAL_DEVICE_ENABLED) { + regmap_write(map, soc_data->sensor_ctrl + REG_CLR, + soc_data->measure_temp_mask); + regmap_write(map, soc_data->sensor_ctrl + REG_SET, + soc_data->power_down_mask); + } + + if ((val & soc_data->temp_valid_mask) == 0) { + dev_dbg(&tz->device, "temp measurement never finished\n"); + return -EAGAIN; + } + + n_meas = (val & soc_data->temp_value_mask) + >> soc_data->temp_value_shift; + + /* See imx_init_calib() for formula derivation */ + if (data->socdata->version == TEMPMON_IMX7D) + *temp = (n_meas - data->c1 + 25) * 1000; + else + *temp = data->c2 - n_meas * data->c1; + + /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */ + if (data->socdata->version == TEMPMON_IMX6Q) { + if (data->alarm_temp == data->temp_passive && + *temp >= data->temp_passive) + imx_set_alarm_temp(data, data->temp_critical); + if (data->alarm_temp == data->temp_critical && + *temp < data->temp_passive) { + imx_set_alarm_temp(data, data->temp_passive); + dev_dbg(&tz->device, "thermal alarm off: T < %d\n", + data->alarm_temp / 1000); + } + } + + if (*temp != data->last_temp) { + dev_dbg(&tz->device, "millicelsius: %d\n", *temp); + data->last_temp = *temp; + } + + /* Reenable alarm IRQ if temperature below alarm temperature */ + if (!data->irq_enabled && *temp < data->alarm_temp) { + data->irq_enabled = true; + enable_irq(data->irq); + } + + return 0; +} + +static int imx_get_mode(struct thermal_zone_device *tz, + enum thermal_device_mode *mode) +{ + struct imx_thermal_data *data = tz->devdata; + + *mode = data->mode; + + return 0; +} + +static int imx_set_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode) +{ + struct imx_thermal_data *data = tz->devdata; + struct regmap *map = data->tempmon; + const struct thermal_soc_data *soc_data = data->socdata; + + if (mode == THERMAL_DEVICE_ENABLED) { + tz->polling_delay = IMX_POLLING_DELAY; + tz->passive_delay = IMX_PASSIVE_DELAY; + + regmap_write(map, soc_data->sensor_ctrl + REG_CLR, + soc_data->power_down_mask); + regmap_write(map, soc_data->sensor_ctrl + REG_SET, + soc_data->measure_temp_mask); + + if (!data->irq_enabled) { + data->irq_enabled = true; + enable_irq(data->irq); + } + } else { + regmap_write(map, soc_data->sensor_ctrl + REG_CLR, + soc_data->measure_temp_mask); + regmap_write(map, soc_data->sensor_ctrl + REG_SET, + soc_data->power_down_mask); + + tz->polling_delay = 0; + tz->passive_delay = 0; + + if (data->irq_enabled) { + disable_irq(data->irq); + data->irq_enabled = false; + } + } + + data->mode = mode; + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + + return 0; +} + +static int imx_get_trip_type(struct thermal_zone_device *tz, int trip, + enum thermal_trip_type *type) +{ + *type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE : + THERMAL_TRIP_CRITICAL; + return 0; +} + +static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp) +{ + struct imx_thermal_data *data = tz->devdata; + + *temp = data->temp_critical; + return 0; +} + +static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip, + int *temp) +{ + struct imx_thermal_data *data = tz->devdata; + + *temp = (trip == IMX_TRIP_PASSIVE) ? data->temp_passive : + data->temp_critical; + return 0; +} + +static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip, + int temp) +{ + struct imx_thermal_data *data = tz->devdata; + + /* do not allow changing critical threshold */ + if (trip == IMX_TRIP_CRITICAL) + return -EPERM; + + /* do not allow passive to be set higher than critical */ + if (temp < 0 || temp > data->temp_critical) + return -EINVAL; + + data->temp_passive = temp; + + imx_set_alarm_temp(data, temp); + + return 0; +} + +static int imx_bind(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev) +{ + int ret; + + ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev, + THERMAL_NO_LIMIT, + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); + if (ret) { + dev_err(&tz->device, + "binding zone %s with cdev %s failed:%d\n", + tz->type, cdev->type, ret); + return ret; + } + + return 0; +} + +static int imx_unbind(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev) +{ + int ret; + + ret = thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev); + if (ret) { + dev_err(&tz->device, + "unbinding zone %s with cdev %s failed:%d\n", + tz->type, cdev->type, ret); + return ret; + } + + return 0; +} + +static struct thermal_zone_device_ops imx_tz_ops = { + .bind = imx_bind, + .unbind = imx_unbind, + .get_temp = imx_get_temp, + .get_mode = imx_get_mode, + .set_mode = imx_set_mode, + .get_trip_type = imx_get_trip_type, + .get_trip_temp = imx_get_trip_temp, + .get_crit_temp = imx_get_crit_temp, + .set_trip_temp = imx_set_trip_temp, +}; + +static int imx_init_calib(struct platform_device *pdev, u32 ocotp_ana1) +{ + struct imx_thermal_data *data = platform_get_drvdata(pdev); + int n1; + u64 temp64; + + if (ocotp_ana1 == 0 || ocotp_ana1 == ~0) { + dev_err(&pdev->dev, "invalid sensor calibration data\n"); + return -EINVAL; + } + + /* + * On i.MX7D, we only use the calibration data at 25C to get the temp, + * Tmeas = ( Nmeas - n1) + 25; n1 is the fuse value for 25C. + */ + if (data->socdata->version == TEMPMON_IMX7D) { + data->c1 = (ocotp_ana1 >> 9) & 0x1ff; + return 0; + } + + /* + * The sensor is calibrated at 25 °C (aka T1) and the value measured + * (aka N1) at this temperature is provided in bits [31:20] in the + * i.MX's OCOTP value ANA1. + * To find the actual temperature T, the following formula has to be used + * when reading value n from the sensor: + * + * T = T1 + (N - N1) / (0.4148468 - 0.0015423 * N1) °C + 3.580661 °C + * = [T1' - N1 / (0.4148468 - 0.0015423 * N1) °C] + N / (0.4148468 - 0.0015423 * N1) °C + * = [T1' + N1 / (0.0015423 * N1 - 0.4148468) °C] - N / (0.0015423 * N1 - 0.4148468) °C + * = c2 - c1 * N + * + * with + * + * T1' = 28.580661 °C + * c1 = 1 / (0.0015423 * N1 - 0.4297157) °C + * c2 = T1' + N1 / (0.0015423 * N1 - 0.4148468) °C + * = T1' + N1 * c1 + */ + n1 = ocotp_ana1 >> 20; + + temp64 = 10000000; /* use 10^7 as fixed point constant for values in formula */ + temp64 *= 1000; /* to get result in °mC */ + do_div(temp64, 15423 * n1 - 4148468); + data->c1 = temp64; + data->c2 = n1 * data->c1 + 28581; + + return 0; +} + +static void imx_init_temp_grade(struct platform_device *pdev, u32 ocotp_mem0) +{ + struct imx_thermal_data *data = platform_get_drvdata(pdev); + + /* The maximum die temp is specified by the Temperature Grade */ + switch ((ocotp_mem0 >> 6) & 0x3) { + case 0: /* Commercial (0 to 95 °C) */ + data->temp_grade = "Commercial"; + data->temp_max = 95000; + break; + case 1: /* Extended Commercial (-20 °C to 105 °C) */ + data->temp_grade = "Extended Commercial"; + data->temp_max = 105000; + break; + case 2: /* Industrial (-40 °C to 105 °C) */ + data->temp_grade = "Industrial"; + data->temp_max = 105000; + break; + case 3: /* Automotive (-40 °C to 125 °C) */ + data->temp_grade = "Automotive"; + data->temp_max = 125000; + break; + } + + /* + * Set the critical trip point at 5 °C under max + * Set the passive trip point at 10 °C under max (changeable via sysfs) + */ + data->temp_critical = data->temp_max - (1000 * 5); + data->temp_passive = data->temp_max - (1000 * 10); +} + +static int imx_init_from_tempmon_data(struct platform_device *pdev) +{ + struct regmap *map; + int ret; + u32 val; + + map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "fsl,tempmon-data"); + if (IS_ERR(map)) { + ret = PTR_ERR(map); + dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret); + return ret; + } + + ret = regmap_read(map, OCOTP_ANA1, &val); + if (ret) { + dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret); + return ret; + } + ret = imx_init_calib(pdev, val); + if (ret) + return ret; + + ret = regmap_read(map, OCOTP_MEM0, &val); + if (ret) { + dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret); + return ret; + } + imx_init_temp_grade(pdev, val); + + return 0; +} + +static int imx_init_from_nvmem_cells(struct platform_device *pdev) +{ + int ret; + u32 val; + + ret = nvmem_cell_read_u32(&pdev->dev, "calib", &val); + if (ret) + return ret; + + ret = imx_init_calib(pdev, val); + if (ret) + return ret; + + ret = nvmem_cell_read_u32(&pdev->dev, "temp_grade", &val); + if (ret) + return ret; + imx_init_temp_grade(pdev, val); + + return 0; +} + +static irqreturn_t imx_thermal_alarm_irq(int irq, void *dev) +{ + struct imx_thermal_data *data = dev; + + disable_irq_nosync(irq); + data->irq_enabled = false; + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev) +{ + struct imx_thermal_data *data = dev; + + dev_dbg(&data->tz->device, "THERMAL ALARM: T > %d\n", + data->alarm_temp / 1000); + + thermal_zone_device_update(data->tz, THERMAL_EVENT_UNSPECIFIED); + + return IRQ_HANDLED; +} + +static const struct of_device_id of_imx_thermal_match[] = { + { .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, }, + { .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, }, + { .compatible = "fsl,imx7d-tempmon", .data = &thermal_imx7d_data, }, + { /* end */ } +}; +MODULE_DEVICE_TABLE(of, of_imx_thermal_match); + +/* + * Create cooling device in case no #cooling-cells property is available in + * CPU node + */ +static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data) +{ + struct device_node *np = of_get_cpu_node(data->policy->cpu, NULL); + int ret; + + if (!np || !of_find_property(np, "#cooling-cells", NULL)) { + data->cdev = cpufreq_cooling_register(data->policy); + if (IS_ERR(data->cdev)) { + ret = PTR_ERR(data->cdev); + cpufreq_cpu_put(data->policy); + return ret; + } + } + + return 0; +} + +static int imx_thermal_probe(struct platform_device *pdev) +{ + struct imx_thermal_data *data; + struct regmap *map; + int measure_freq; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon"); + if (IS_ERR(map)) { + ret = PTR_ERR(map); + dev_err(&pdev->dev, "failed to get tempmon regmap: %d\n", ret); + return ret; + } + data->tempmon = map; + + data->socdata = of_device_get_match_data(&pdev->dev); + if (!data->socdata) { + dev_err(&pdev->dev, "no device match found\n"); + return -ENODEV; + } + + /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */ + if (data->socdata->version == TEMPMON_IMX6SX) { + regmap_write(map, IMX6_MISC1 + REG_CLR, + IMX6_MISC1_IRQ_TEMPHIGH | IMX6_MISC1_IRQ_TEMPLOW + | IMX6_MISC1_IRQ_TEMPPANIC); + /* + * reset value of LOW ALARM is incorrect, set it to lowest + * value to avoid false trigger of low alarm. + */ + regmap_write(map, data->socdata->low_alarm_ctrl + REG_SET, + data->socdata->low_alarm_mask); + } + + data->irq = platform_get_irq(pdev, 0); + if (data->irq < 0) + return data->irq; + + platform_set_drvdata(pdev, data); + + if (of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) { + ret = imx_init_from_nvmem_cells(pdev); + if (ret == -EPROBE_DEFER) + return ret; + if (ret) { + dev_err(&pdev->dev, "failed to init from nvmem: %d\n", + ret); + return ret; + } + } else { + ret = imx_init_from_tempmon_data(pdev); + if (ret) { + dev_err(&pdev->dev, "failed to init from from fsl,tempmon-data\n"); + return ret; + } + } + + /* Make sure sensor is in known good state for measurements */ + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->power_down_mask); + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->measure_temp_mask); + regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR, + data->socdata->measure_freq_mask); + if (data->socdata->version != TEMPMON_IMX7D) + regmap_write(map, IMX6_MISC0 + REG_SET, + IMX6_MISC0_REFTOP_SELBIASOFF); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->power_down_mask); + + data->policy = cpufreq_cpu_get(0); + if (!data->policy) { + pr_debug("%s: CPUFreq policy not found\n", __func__); + return -EPROBE_DEFER; + } + + ret = imx_thermal_register_legacy_cooling(data); + if (ret) { + dev_err(&pdev->dev, + "failed to register cpufreq cooling device: %d\n", ret); + return ret; + } + + data->thermal_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->thermal_clk)) { + ret = PTR_ERR(data->thermal_clk); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "failed to get thermal clk: %d\n", ret); + cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); + return ret; + } + + /* + * Thermal sensor needs clk on to get correct value, normally + * we should enable its clk before taking measurement and disable + * clk after measurement is done, but if alarm function is enabled, + * hardware will auto measure the temperature periodically, so we + * need to keep the clk always on for alarm function. + */ + ret = clk_prepare_enable(data->thermal_clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret); + cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); + return ret; + } + + data->tz = thermal_zone_device_register("imx_thermal_zone", + IMX_TRIP_NUM, + BIT(IMX_TRIP_PASSIVE), data, + &imx_tz_ops, NULL, + IMX_PASSIVE_DELAY, + IMX_POLLING_DELAY); + if (IS_ERR(data->tz)) { + ret = PTR_ERR(data->tz); + dev_err(&pdev->dev, + "failed to register thermal zone device %d\n", ret); + clk_disable_unprepare(data->thermal_clk); + cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); + return ret; + } + + dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC" + " critical:%dC passive:%dC\n", data->temp_grade, + data->temp_max / 1000, data->temp_critical / 1000, + data->temp_passive / 1000); + + /* Enable measurements at ~ 10 Hz */ + regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR, + data->socdata->measure_freq_mask); + measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */ + regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET, + measure_freq << data->socdata->measure_freq_shift); + imx_set_alarm_temp(data, data->temp_passive); + + if (data->socdata->version == TEMPMON_IMX6SX) + imx_set_panic_temp(data, data->temp_critical); + + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->power_down_mask); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->measure_temp_mask); + + data->irq_enabled = true; + data->mode = THERMAL_DEVICE_ENABLED; + + ret = devm_request_threaded_irq(&pdev->dev, data->irq, + imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread, + 0, "imx_thermal", data); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret); + clk_disable_unprepare(data->thermal_clk); + thermal_zone_device_unregister(data->tz); + cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); + return ret; + } + + return 0; +} + +static int imx_thermal_remove(struct platform_device *pdev) +{ + struct imx_thermal_data *data = platform_get_drvdata(pdev); + struct regmap *map = data->tempmon; + + /* Disable measurements */ + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->power_down_mask); + if (!IS_ERR(data->thermal_clk)) + clk_disable_unprepare(data->thermal_clk); + + thermal_zone_device_unregister(data->tz); + cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int imx_thermal_suspend(struct device *dev) +{ + struct imx_thermal_data *data = dev_get_drvdata(dev); + struct regmap *map = data->tempmon; + + /* + * Need to disable thermal sensor, otherwise, when thermal core + * try to get temperature before thermal sensor resume, a wrong + * temperature will be read as the thermal sensor is powered + * down. + */ + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->measure_temp_mask); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->power_down_mask); + data->mode = THERMAL_DEVICE_DISABLED; + clk_disable_unprepare(data->thermal_clk); + + return 0; +} + +static int imx_thermal_resume(struct device *dev) +{ + struct imx_thermal_data *data = dev_get_drvdata(dev); + struct regmap *map = data->tempmon; + int ret; + + ret = clk_prepare_enable(data->thermal_clk); + if (ret) + return ret; + /* Enabled thermal sensor after resume */ + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->power_down_mask); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->measure_temp_mask); + data->mode = THERMAL_DEVICE_ENABLED; + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops, + imx_thermal_suspend, imx_thermal_resume); + +static struct platform_driver imx_thermal = { + .driver = { + .name = "imx_thermal", + .pm = &imx_thermal_pm_ops, + .of_match_table = of_imx_thermal_match, + }, + .probe = imx_thermal_probe, + .remove = imx_thermal_remove, +}; +module_platform_driver(imx_thermal); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("Thermal driver for Freescale i.MX SoCs"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:imx-thermal"); -- cgit v1.2.3