From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Mon, 6 May 2024 03:02:30 +0200
Subject: Adding upstream version 4.19.249.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 .../omapfb/displays/panel-sharp-ls037v7dw01.c      | 342 +++++++++++++++++++++
 1 file changed, 342 insertions(+)
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c

(limited to 'drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c')

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
new file mode 100644
index 000000000..a8be18a87
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
@@ -0,0 +1,342 @@
+/*
+ * LCD panel driver for Sharp LS037V7DW01
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <video/omapfb_dss.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+	struct regulator *vcc;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	struct gpio_desc *resb_gpio;	/* low = reset active min 20 us */
+	struct gpio_desc *ini_gpio;	/* high = power on */
+	struct gpio_desc *mo_gpio;	/* low = 480x640, high = 240x320 */
+	struct gpio_desc *lr_gpio;	/* high = conventional horizontal scanning */
+	struct gpio_desc *ud_gpio;	/* high = conventional vertical scanning */
+};
+
+static const struct omap_video_timings sharp_ls_timings = {
+	.x_res = 480,
+	.y_res = 640,
+
+	.pixelclock	= 19200000,
+
+	.hsw		= 2,
+	.hfp		= 1,
+	.hbp		= 28,
+
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 1,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int sharp_ls_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void sharp_ls_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int sharp_ls_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	if (ddata->vcc) {
+		r = regulator_enable(ddata->vcc);
+		if (r != 0)
+			return r;
+	}
+
+	r = in->ops.dpi->enable(in);
+	if (r) {
+		regulator_disable(ddata->vcc);
+		return r;
+	}
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
+	if (ddata->resb_gpio)
+		gpiod_set_value_cansleep(ddata->resb_gpio, 1);
+
+	if (ddata->ini_gpio)
+		gpiod_set_value_cansleep(ddata->ini_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void sharp_ls_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->ini_gpio)
+		gpiod_set_value_cansleep(ddata->ini_gpio, 0);
+
+	if (ddata->resb_gpio)
+		gpiod_set_value_cansleep(ddata->resb_gpio, 0);
+
+	/* wait at least 5 vsyncs after disabling the LCD */
+
+	msleep(100);
+
+	in->ops.dpi->disable(in);
+
+	if (ddata->vcc)
+		regulator_disable(ddata->vcc);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void sharp_ls_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int sharp_ls_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver sharp_ls_ops = {
+	.connect	= sharp_ls_connect,
+	.disconnect	= sharp_ls_disconnect,
+
+	.enable		= sharp_ls_enable,
+	.disable	= sharp_ls_disable,
+
+	.set_timings	= sharp_ls_set_timings,
+	.get_timings	= sharp_ls_get_timings,
+	.check_timings	= sharp_ls_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static  int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
+	const char *desc, struct gpio_desc **gpiod)
+{
+	struct gpio_desc *gd;
+
+	*gpiod = NULL;
+
+	gd = devm_gpiod_get_index(dev, desc, index, GPIOD_OUT_LOW);
+	if (IS_ERR(gd))
+		return PTR_ERR(gd);
+
+	*gpiod = gd;
+	return 0;
+}
+
+static int sharp_ls_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int r;
+
+	ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
+	if (IS_ERR(ddata->vcc)) {
+		dev_err(&pdev->dev, "failed to get regulator\n");
+		return PTR_ERR(ddata->vcc);
+	}
+
+	/* lcd INI */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
+	if (r)
+		return r;
+
+	/* lcd RESB */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio);
+	if (r)
+		return r;
+
+	/* lcd MO */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio);
+	if (r)
+		return r;
+
+	/* lcd LR */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio);
+	if (r)
+		return r;
+
+	/* lcd UD */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio);
+	if (r)
+		return r;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int sharp_ls_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	r = sharp_ls_probe_of(pdev);
+	if (r)
+		return r;
+
+	ddata->videomode = sharp_ls_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &pdev->dev;
+	dssdev->driver = &sharp_ls_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit sharp_ls_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	sharp_ls_disable(dssdev);
+	sharp_ls_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id sharp_ls_of_match[] = {
+	{ .compatible = "omapdss,sharp,ls037v7dw01", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
+
+static struct platform_driver sharp_ls_driver = {
+	.probe = sharp_ls_probe,
+	.remove = __exit_p(sharp_ls_remove),
+	.driver = {
+		.name = "panel-sharp-ls037v7dw01",
+		.of_match_table = sharp_ls_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(sharp_ls_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3