From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- samples/bpf/test_cgrp2_tc.sh | 185 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 185 insertions(+) create mode 100755 samples/bpf/test_cgrp2_tc.sh (limited to 'samples/bpf/test_cgrp2_tc.sh') diff --git a/samples/bpf/test_cgrp2_tc.sh b/samples/bpf/test_cgrp2_tc.sh new file mode 100755 index 000000000..12faf5847 --- /dev/null +++ b/samples/bpf/test_cgrp2_tc.sh @@ -0,0 +1,185 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +MY_DIR=$(dirname $0) +# Details on the bpf prog +BPF_CGRP2_ARRAY_NAME='test_cgrp2_array_pin' +BPF_PROG="$MY_DIR/test_cgrp2_tc_kern.o" +BPF_SECTION='filter' + +[ -z "$TC" ] && TC='tc' +[ -z "$IP" ] && IP='ip' + +# Names of the veth interface, net namespace...etc. +HOST_IFC='ve' +NS_IFC='vens' +NS='ns' + +find_mnt() { + cat /proc/mounts | \ + awk '{ if ($3 == "'$1'" && mnt == "") { mnt = $2 }} END { print mnt }' +} + +# Init cgroup2 vars +init_cgrp2_vars() { + CGRP2_ROOT=$(find_mnt cgroup2) + if [ -z "$CGRP2_ROOT" ] + then + CGRP2_ROOT='/mnt/cgroup2' + MOUNT_CGRP2="yes" + fi + CGRP2_TC="$CGRP2_ROOT/tc" + CGRP2_TC_LEAF="$CGRP2_TC/leaf" +} + +# Init bpf fs vars +init_bpf_fs_vars() { + local bpf_fs_root=$(find_mnt bpf) + [ -n "$bpf_fs_root" ] || return -1 + BPF_FS_TC_SHARE="$bpf_fs_root/tc/globals" +} + +setup_cgrp2() { + case $1 in + start) + if [ "$MOUNT_CGRP2" == 'yes' ] + then + [ -d $CGRP2_ROOT ] || mkdir -p $CGRP2_ROOT + mount -t cgroup2 none $CGRP2_ROOT || return $? + fi + mkdir -p $CGRP2_TC_LEAF + ;; + *) + rmdir $CGRP2_TC_LEAF && rmdir $CGRP2_TC + [ "$MOUNT_CGRP2" == 'yes' ] && umount $CGRP2_ROOT + ;; + esac +} + +setup_bpf_cgrp2_array() { + local bpf_cgrp2_array="$BPF_FS_TC_SHARE/$BPF_CGRP2_ARRAY_NAME" + case $1 in + start) + $MY_DIR/test_cgrp2_array_pin -U $bpf_cgrp2_array -v $CGRP2_TC + ;; + *) + [ -d "$BPF_FS_TC_SHARE" ] && rm -f $bpf_cgrp2_array + ;; + esac +} + +setup_net() { + case $1 in + start) + $IP link add $HOST_IFC type veth peer name $NS_IFC || return $? + $IP link set dev $HOST_IFC up || return $? + sysctl -q net.ipv6.conf.$HOST_IFC.accept_dad=0 + + $IP netns add ns || return $? + $IP link set dev $NS_IFC netns ns || return $? + $IP -n $NS link set dev $NS_IFC up || return $? + $IP netns exec $NS sysctl -q net.ipv6.conf.$NS_IFC.accept_dad=0 + $TC qdisc add dev $HOST_IFC clsact || return $? + $TC filter add dev $HOST_IFC egress bpf da obj $BPF_PROG sec $BPF_SECTION || return $? + ;; + *) + $IP netns del $NS + $IP link del $HOST_IFC + ;; + esac +} + +run_in_cgrp() { + # Fork another bash and move it under the specified cgroup. + # It makes the cgroup cleanup easier at the end of the test. + cmd='echo $$ > ' + cmd="$cmd $1/cgroup.procs; exec $2" + bash -c "$cmd" +} + +do_test() { + run_in_cgrp $CGRP2_TC_LEAF "ping -6 -c3 ff02::1%$HOST_IFC >& /dev/null" + local dropped=$($TC -s qdisc show dev $HOST_IFC | tail -3 | \ + awk '/drop/{print substr($7, 0, index($7, ",")-1)}') + if [[ $dropped -eq 0 ]] + then + echo "FAIL" + return 1 + else + echo "Successfully filtered $dropped packets" + return 0 + fi +} + +do_exit() { + if [ "$DEBUG" == "yes" ] && [ "$MODE" != 'cleanuponly' ] + then + echo "------ DEBUG ------" + echo "mount: "; mount | egrep '(cgroup2|bpf)'; echo + echo "$CGRP2_TC_LEAF: "; ls -l $CGRP2_TC_LEAF; echo + if [ -d "$BPF_FS_TC_SHARE" ] + then + echo "$BPF_FS_TC_SHARE: "; ls -l $BPF_FS_TC_SHARE; echo + fi + echo "Host net:" + $IP netns + $IP link show dev $HOST_IFC + $IP -6 a show dev $HOST_IFC + $TC -s qdisc show dev $HOST_IFC + echo + echo "$NS net:" + $IP -n $NS link show dev $NS_IFC + $IP -n $NS -6 link show dev $NS_IFC + echo "------ DEBUG ------" + echo + fi + + if [ "$MODE" != 'nocleanup' ] + then + setup_net stop + setup_bpf_cgrp2_array stop + setup_cgrp2 stop + fi +} + +init_cgrp2_vars +init_bpf_fs_vars + +while [[ $# -ge 1 ]] +do + a="$1" + case $a in + debug) + DEBUG='yes' + shift 1 + ;; + cleanup-only) + MODE='cleanuponly' + shift 1 + ;; + no-cleanup) + MODE='nocleanup' + shift 1 + ;; + *) + echo "test_cgrp2_tc [debug] [cleanup-only | no-cleanup]" + echo " debug: Print cgrp and network setup details at the end of the test" + echo " cleanup-only: Try to cleanup things from last test. No test will be run" + echo " no-cleanup: Run the test but don't do cleanup at the end" + echo "[Note: If no arg is given, it will run the test and do cleanup at the end]" + echo + exit -1 + ;; + esac +done + +trap do_exit 0 + +[ "$MODE" == 'cleanuponly' ] && exit + +setup_cgrp2 start || exit $? +setup_net start || exit $? +init_bpf_fs_vars || exit $? +setup_bpf_cgrp2_array start || exit $? +do_test +echo -- cgit v1.2.3