// SPDX-License-Identifier: GPL-2.0+ /* * USB ConnectTech WhiteHEAT driver * * Copyright (C) 2002 * Connect Tech Inc. * * Copyright (C) 1999 - 2001 * Greg Kroah-Hartman (greg@kroah.com) * * See Documentation/usb/usb-serial.txt for more information on using this * driver */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "whiteheat.h" /* WhiteHEAT specific commands */ #ifndef CMSPAR #define CMSPAR 0 #endif /* * Version Information */ #define DRIVER_AUTHOR "Greg Kroah-Hartman , Stuart MacDonald " #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" #define CONNECT_TECH_VENDOR_ID 0x0710 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001 #define CONNECT_TECH_WHITE_HEAT_ID 0x8001 /* ID tables for whiteheat are unusual, because we want to different things for different versions of the device. Eventually, this will be doable from a single table. But, for now, we define two separate ID tables, and then a third table that combines them just for the purpose of exporting the autoloading information. */ static const struct usb_device_id id_table_std[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; static const struct usb_device_id id_table_prerenumeration[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table_combined); /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ static int whiteheat_firmware_download(struct usb_serial *serial, const struct usb_device_id *id); static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_release(struct usb_serial *serial); static int whiteheat_port_probe(struct usb_serial_port *port); static int whiteheat_port_remove(struct usb_serial_port *port); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port); static void whiteheat_close(struct usb_serial_port *port); static int whiteheat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int whiteheat_tiocmget(struct tty_struct *tty); static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); static struct usb_serial_driver whiteheat_fake_device = { .driver = { .owner = THIS_MODULE, .name = "whiteheatnofirm", }, .description = "Connect Tech - WhiteHEAT - (prerenumeration)", .id_table = id_table_prerenumeration, .num_ports = 1, .probe = whiteheat_firmware_download, .attach = whiteheat_firmware_attach, }; static struct usb_serial_driver whiteheat_device = { .driver = { .owner = THIS_MODULE, .name = "whiteheat", }, .description = "Connect Tech - WhiteHEAT", .id_table = id_table_std, .num_ports = 4, .num_bulk_in = 5, .num_bulk_out = 5, .attach = whiteheat_attach, .release = whiteheat_release, .port_probe = whiteheat_port_probe, .port_remove = whiteheat_port_remove, .open = whiteheat_open, .close = whiteheat_close, .ioctl = whiteheat_ioctl, .set_termios = whiteheat_set_termios, .break_ctl = whiteheat_break_ctl, .tiocmget = whiteheat_tiocmget, .tiocmset = whiteheat_tiocmset, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, }; static struct usb_serial_driver * const serial_drivers[] = { &whiteheat_fake_device, &whiteheat_device, NULL }; struct whiteheat_command_private { struct mutex mutex; __u8 port_running; __u8 command_finished; wait_queue_head_t wait_command; /* for handling sleeping whilst waiting for a command to finish */ __u8 result_buffer[64]; }; struct whiteheat_private { __u8 mcr; /* FIXME: no locking on mcr */ }; /* local function prototypes */ static int start_command_port(struct usb_serial *serial); static void stop_command_port(struct usb_serial *serial); static void command_port_write_callback(struct urb *urb); static void command_port_read_callback(struct urb *urb); static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); static int firm_open(struct usb_serial_port *port); static int firm_close(struct usb_serial_port *port); static void firm_setup_port(struct tty_struct *tty); static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); static int firm_set_break(struct usb_serial_port *port, __u8 onoff); static int firm_purge(struct usb_serial_port *port, __u8 rxtx); static int firm_get_dtr_rts(struct usb_serial_port *port); static int firm_report_tx_done(struct usb_serial_port *port); #define COMMAND_PORT 4 #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ #define COMMAND_TIMEOUT_MS 2000 #define CLOSING_DELAY (30 * HZ) /***************************************************************************** * Connect Tech's White Heat prerenumeration driver functions *****************************************************************************/ /* steps to download the firmware to the WhiteHEAT device: - hold the reset (by writing to the reset bit of the CPUCS register) - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD - release the reset (by writing to the CPUCS register) - download the WH.HEX file for all addresses greater than 0x1b3f using VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD - hold the reset - download the WH.HEX file for all addresses less than 0x1b40 using VENDOR_REQUEST_ANCHOR_LOAD - release the reset - device renumerated itself and comes up as new device id with all firmware download completed. */ static int whiteheat_firmware_download(struct usb_serial *serial, const struct usb_device_id *id) { int response; response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); if (response >= 0) { response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); if (response >= 0) return 0; } return -ENOENT; } static int whiteheat_firmware_attach(struct usb_serial *serial) { /* We want this device to fail to have a driver assigned to it */ return 1; } /***************************************************************************** * Connect Tech's White Heat serial driver functions *****************************************************************************/ static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; struct whiteheat_hw_info *hw_info; int pipe; int ret; int alen; __u8 *command; __u8 *result; command_port = serial->port[COMMAND_PORT]; pipe = usb_sndbulkpipe(serial->dev, command_port->bulk_out_endpointAddress); command = kmalloc(2, GFP_KERNEL); if (!command) goto no_command_buffer; command[0] = WHITEHEAT_GET_HW_INFO; command[1] = 0; result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); if (!result) goto no_result_buffer; /* * When the module is reloaded the firmware is still there and * the endpoints are still in the usb core unchanged. This is the * unlinking bug in disguise. Same for the call below. */ usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg(serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); if (ret) { dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n", serial->type->description, ret); goto no_firmware; } else if (alen != 2) { dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n", serial->type->description, alen); goto no_firmware; } pipe = usb_rcvbulkpipe(serial->dev, command_port->bulk_in_endpointAddress); /* See the comment on the usb_clear_halt() above */ usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg(serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(*hw_info) + 1) { dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n", serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { dev_err(&serial->dev->dev, "%s: Command failed [%d]\n", serial->type->description, result[0]); goto no_firmware; } hw_info = (struct whiteheat_hw_info *)&result[1]; dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n", serial->type->description, hw_info->sw_major_rev, hw_info->sw_minor_rev); command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (!command_info) goto no_command_private; mutex_init(&command_info->mutex); command_info->port_running = 0; init_waitqueue_head(&command_info->wait_command); usb_set_serial_port_data(command_port, command_info); command_port->write_urb->complete = command_port_write_callback; command_port->read_urb->complete = command_port_read_callback; kfree(result); kfree(command); return 0; no_firmware: /* Firmware likely not running */ dev_err(&serial->dev->dev, "%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); dev_err(&serial->dev->dev, "%s: If the firmware is not running (status led not blinking)\n", serial->type->description); dev_err(&serial->dev->dev, "%s: please contact support@connecttech.com\n", serial->type->description); kfree(result); kfree(command); return -ENODEV; no_command_private: kfree(result); no_result_buffer: kfree(command); no_command_buffer: return -ENOMEM; } static void whiteheat_release(struct usb_serial *serial) { struct usb_serial_port *command_port; /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; kfree(usb_get_serial_port_data(command_port)); } static int whiteheat_port_probe(struct usb_serial_port *port) { struct whiteheat_private *info; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; usb_set_serial_port_data(port, info); return 0; } static int whiteheat_port_remove(struct usb_serial_port *port) { struct whiteheat_private *info; info = usb_get_serial_port_data(port); kfree(info); return 0; } static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) { int retval; retval = start_command_port(port->serial); if (retval) goto exit; /* send an open port command */ retval = firm_open(port); if (retval) { stop_command_port(port->serial); goto exit; } retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX); if (retval) { firm_close(port); stop_command_port(port->serial); goto exit; } if (tty) firm_setup_port(tty); /* Work around HCD bugs */ usb_clear_halt(port->serial->dev, port->read_urb->pipe); usb_clear_halt(port->serial->dev, port->write_urb->pipe); retval = usb_serial_generic_open(tty, port); if (retval) { firm_close(port); stop_command_port(port->serial); goto exit; } exit: return retval; } static void whiteheat_close(struct usb_serial_port *port) { firm_report_tx_done(port); firm_close(port); usb_serial_generic_close(port); stop_command_port(port->serial); } static int whiteheat_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); unsigned int modem_signals = 0; firm_get_dtr_rts(port); if (info->mcr & UART_MCR_DTR) modem_signals |= TIOCM_DTR; if (info->mcr & UART_MCR_RTS) modem_signals |= TIOCM_RTS; return modem_signals; } static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); if (set & TIOCM_RTS) info->mcr |= UART_MCR_RTS; if (set & TIOCM_DTR) info->mcr |= UART_MCR_DTR; if (clear & TIOCM_RTS) info->mcr &= ~UART_MCR_RTS; if (clear & TIOCM_DTR) info->mcr &= ~UART_MCR_DTR; firm_set_dtr(port, info->mcr & UART_MCR_DTR); firm_set_rts(port, info->mcr & UART_MCR_RTS); return 0; } static int whiteheat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; switch (cmd) { case TIOCGSERIAL: memset(&serstruct, 0, sizeof(serstruct)); serstruct.type = PORT_16654; serstruct.line = port->minor; serstruct.port = port->port_number; serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); serstruct.custom_divisor = 0; serstruct.baud_base = 460800; serstruct.close_delay = CLOSING_DELAY; serstruct.closing_wait = CLOSING_DELAY; if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) return -EFAULT; break; default: break; } return -ENOIOCTLCMD; } static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { firm_setup_port(tty); } static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; firm_set_break(port, break_state); } /***************************************************************************** * Connect Tech's White Heat callback routines *****************************************************************************/ static void command_port_write_callback(struct urb *urb) { int status = urb->status; if (status) { dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); return; } } static void command_port_read_callback(struct urb *urb) { struct usb_serial_port *command_port = urb->context; struct whiteheat_command_private *command_info; int status = urb->status; unsigned char *data = urb->transfer_buffer; int result; command_info = usb_get_serial_port_data(command_port); if (!command_info) { dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); return; } if (!urb->actual_length) { dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__); return; } if (status) { dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); if (status != -ENOENT) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); return; } usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); } else if (data[0] == WHITEHEAT_CMD_FAILURE) { command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); } else if (data[0] == WHITEHEAT_EVENT) { /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) && (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) { memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); } else dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); /* Continue trying to always read */ result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); } /***************************************************************************** * Connect Tech's White Heat firmware interface *****************************************************************************/ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; struct whiteheat_private *info; struct device *dev = &port->dev; __u8 *transfer_buffer; int retval = 0; int t; dev_dbg(dev, "%s - command %d\n", __func__, command); command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); if (command_port->bulk_out_size < datasize + 1) return -EIO; mutex_lock(&command_info->mutex); command_info->command_finished = false; transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; transfer_buffer[0] = command; memcpy(&transfer_buffer[1], data, datasize); command_port->write_urb->transfer_buffer_length = datasize + 1; retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); if (retval) { dev_dbg(dev, "%s - submit urb failed\n", __func__); goto exit; } /* wait for the command to complete */ t = wait_event_timeout(command_info->wait_command, (bool)command_info->command_finished, COMMAND_TIMEOUT); if (!t) usb_kill_urb(command_port->write_urb); if (command_info->command_finished == false) { dev_dbg(dev, "%s - command timed out.\n", __func__); retval = -ETIMEDOUT; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { dev_dbg(dev, "%s - command failed.\n", __func__); retval = -EIO; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { dev_dbg(dev, "%s - command completed.\n", __func__); switch (command) { case WHITEHEAT_GET_DTR_RTS: info = usb_get_serial_port_data(port); info->mcr = command_info->result_buffer[0]; break; } } exit: mutex_unlock(&command_info->mutex); return retval; } static int firm_open(struct usb_serial_port *port) { struct whiteheat_simple open_command; open_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command)); } static int firm_close(struct usb_serial_port *port) { struct whiteheat_simple close_command; close_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command)); } static void firm_setup_port(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; speed_t baud; port_settings.port = port->port_number + 1; /* get the byte size */ switch (cflag & CSIZE) { case CS5: port_settings.bits = 5; break; case CS6: port_settings.bits = 6; break; case CS7: port_settings.bits = 7; break; default: case CS8: port_settings.bits = 8; break; } dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); /* determine the parity */ if (cflag & PARENB) if (cflag & CMSPAR) if (cflag & PARODD) port_settings.parity = WHITEHEAT_PAR_MARK; else port_settings.parity = WHITEHEAT_PAR_SPACE; else if (cflag & PARODD) port_settings.parity = WHITEHEAT_PAR_ODD; else port_settings.parity = WHITEHEAT_PAR_EVEN; else port_settings.parity = WHITEHEAT_PAR_NONE; dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); /* figure out the stop bits requested */ if (cflag & CSTOPB) port_settings.stop = 2; else port_settings.stop = 1; dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); /* figure out the flow control settings */ if (cflag & CRTSCTS) port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); /* determine software flow control */ if (I_IXOFF(tty)) port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); port_settings.xon = START_CHAR(tty); port_settings.xoff = STOP_CHAR(tty); dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ baud = tty_get_baud_rate(tty); port_settings.baud = cpu_to_le32(baud); dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud); /* fixme: should set validated settings */ tty_encode_baud_rate(tty, baud, baud); /* handle any settings that aren't specified in the tty structure */ port_settings.lloop = 0; /* now send the message to the device */ firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings)); } static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb rts_command; rts_command.port = port->port_number + 1; rts_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command)); } static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb dtr_command; dtr_command.port = port->port_number + 1; dtr_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_DTR, (__u8 *)&dtr_command, sizeof(dtr_command)); } static int firm_set_break(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb break_command; break_command.port = port->port_number + 1; break_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_BREAK, (__u8 *)&break_command, sizeof(break_command)); } static int firm_purge(struct usb_serial_port *port, __u8 rxtx) { struct whiteheat_purge purge_command; purge_command.port = port->port_number + 1; purge_command.what = rxtx; return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command)); } static int firm_get_dtr_rts(struct usb_serial_port *port) { struct whiteheat_simple get_dr_command; get_dr_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command)); } static int firm_report_tx_done(struct usb_serial_port *port) { struct whiteheat_simple close_command; close_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command)); } /***************************************************************************** * Connect Tech's White Heat utility functions *****************************************************************************/ static int start_command_port(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; int retval = 0; command_port = serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); mutex_lock(&command_info->mutex); if (!command_info->port_running) { /* Work around HCD bugs */ usb_clear_halt(serial->dev, command_port->read_urb->pipe); retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); if (retval) { dev_err(&serial->dev->dev, "%s - failed submitting read urb, error %d\n", __func__, retval); goto exit; } } command_info->port_running++; exit: mutex_unlock(&command_info->mutex); return retval; } static void stop_command_port(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; command_port = serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); mutex_lock(&command_info->mutex); command_info->port_running--; if (!command_info->port_running) usb_kill_urb(command_port->read_urb); mutex_unlock(&command_info->mutex); } module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("whiteheat.fw"); MODULE_FIRMWARE("whiteheat_loader.fw");