diff options
Diffstat (limited to '')
| -rw-r--r-- | userdefs.h | 1868 |
1 files changed, 1868 insertions, 0 deletions
diff --git a/userdefs.h b/userdefs.h new file mode 100644 index 0000000..91f4910 --- /dev/null +++ b/userdefs.h @@ -0,0 +1,1868 @@ +/* + * $LynxId: userdefs.h,v 1.342 2018/07/08 15:22:44 tom Exp $ + * + * Lynx - Hypertext navigation system + * + * (c) Copyright 1992, 1993, 1994 University of Kansas + * 1995, 1996: GNU General Public License + * + * Copyright 1996-2017,2018 Thomas E. Dickey and Lynx Developers Group + * Note: GNU General Public License is not a copyright. + */ + +/******************************************************************* + * There are four sections to this document: + * Section 1. Things you MUST verify. Unix platforms use a configure + * script to provide sensible default values. If your site + * has special requirements, that may not be sufficient. + * For non-Unix platforms (e.g., VMS), there is no + * configure script, so the defaults here are more + * critical. + * Section 1a) VMS specific things + * Section 1b) non-VMS specific things + * Section 1c) ALL Platforms + * + * Section 2. Things you should probably check! + * + * Section 3. Things you should only change after you have a good + * understanding of the program! + * + * Section 4. Things you MUST check only if you plan to use Lynx in + * an anonymous account (allow public access to Lynx)! + * + */ + +#ifndef USERDEFS_H +#define USERDEFS_H + +/******************************************************************* + * Insure definition of NOT_ASCII, etc. precedes use below. + */ +#ifndef HTUTILS_H +#include <HTUtils.h> +#endif + +#ifdef HAVE_CONFIG_H +#include <lynx_cfg.h> +#endif + +/******************************************************************* + * Things you must change + * Section 1. + */ + +/******************************************************************* + * Things you must change - VMS specific + * Section 1a). + */ +#ifdef VMS +/************************** + * TEMP_SPACE is where Lynx temporary cache files will be placed. + * Temporary files are removed automatically as long as nothing + * goes terribly wrong :) If you include "$USER" in the definition + * (e.g., "device:[dir.$USER]"), Lynx will replace the "$USER" with + * the username of the account which invoked the Lynx image. Such + * directories should already exist, and have protections/ACLs set + * so that only the appropriate user(s) will have read/write access. + * On VMS, "sys$scratch:" defaults to "sys$login:" if it has not been + * defined externally, or you can use "sys$login:" explicitly here. + * If the path has SHELL syntax and includes a tilde (e.g, "~/lynxtmp"), + * Lynx will replace the tilde with the full path for the user's home + * and convert the result to VMS syntax. + * The definition here can be overridden at run time by defining a + * "LYNX_TEMP_SPACE" VMS logical. + */ +#define TEMP_SPACE "sys$scratch:" + +/************************** + * LYNX_CFG_FILE is the location and name of the default lynx + * global configuration file. It is sought and processed at + * startup of Lynx, followed by a seek and processing of a + * personal RC file (.lynxrc in the user's HOME directory, + * created if the user saves values in the 'o'ptions menu). + * You also can define the location and name of the global + * configuration file via a VMS logical, "LYNX_CFG", which + * will override the "LYNX_CFG_FILE" definition here. SYS$LOGIN: + * can be used as the device in either or both definitions if + * you want lynx.cfg treated as a personal configuration file. + * You also can use Unix syntax with a '~' for a subdirectory + * of the login directory, (e.g., ~/lynx/lynx.cfg). + * The -cfg command line switch will override these definitions. + * You can pass the compilation default via build.com or descrip.mms. + * + * Note that some implementations of telnet allow passing of + * environment variables, which might be used by unscrupulous + * people to modify the environment in anonymous accounts. When + * making Lynx and Web access publicly available via anonymous + * accounts intended to run Lynx captively, be sure the wrapper + * uses the -cfg switch and specifies the startfile, rather than + * relying on the LYNX_CFG, LYNX_CFG_FILE, or WWW_HOME variables. + * + * Note that any SUFFIX or VIEWER mappings in the configuration + * file will be overridden by any suffix or viewer mappings + * that are established as defaults in src/HTInit.c. You can + * override the src/HTInit.c defaults via the mime.types and + * mailcap files (see the examples in the samples directory). + */ +#ifndef LYNX_CFG_FILE +#define LYNX_CFG_FILE "Lynx_Dir:lynx.cfg" +#endif /* LYNX_CFG_FILE */ + +#ifndef LYNX_CFG_PATH +#define LYNX_CFG_PATH "Lynx_Dir" +#endif /* LYNX_CFG_PATH */ + +/************************** + * The EXTENSION_MAP file allows you to map file suffixes to + * mime types. + * The file locations defined here can be overridden in lynx.cfg. + * Mappings in these global and personal files override any SUFFIX + * definitions in lynx.cfg and built-in defaults from src/HTInit.c. + */ +#define GLOBAL_EXTENSION_MAP "Lynx_Dir:mime.types" +#define PERSONAL_EXTENSION_MAP "mime.types" + +/************************** + * The MAILCAP file allows you to map file MIME types to + * external viewers. + * The file locations defined here can be overridden in lynx.cfg. + * Mappings in these global and personal files override any VIEWER + * definitions in lynx.cfg and built-in defaults from src/HTInit.c. + */ +#define GLOBAL_MAILCAP "Lynx_Dir:mailcap" +#define PERSONAL_MAILCAP ".mailcap" + +/************************** + * XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c + * for viewing image content types when the DECW$DISPLAY logical + * is set. Make it the foreign command for your system's X image + * viewer (commonly, "xv"). It can be anything that will handle GIF, + * TIFF and other popular image formats. Freeware ports of xv for + * VMS are available in the ftp://ftp.wku.edu/vms/unsupported and + * http://www.openvms.digital.com/cd/XV310A/ subdirectories. You + * must also have a "%s" for the filename. The default defined + * here can be overridden in lynx.cfg, or via the global or personal + * mailcap files. + * Make this NULL if you don't have such a viewer or don't want to + * use any default viewers for image types. + */ +#define XLOADIMAGE_COMMAND "xv %s" + +/************************** + * SYSTEM_MAIL must be defined here to your mail sending command, + * and SYSTEM_MAIL_FLAGS to appropriate qualifiers. They can be + * changed in lynx.cfg. + * + * The mail command will be spawned as a subprocess of lynx + * and used to send the email, with headers specified in a + * temporary file for PMDF. If you define SYSTEM_MAIL to the + * "generic" MAIL utility for VMS, headers cannot be specified + * via a header file (and thus may not be included), and the + * subject line will be specified by use of the /subject="SUBJECT" + * qualifier. + * + * If your mailer uses another syntax, some hacking of the + * mailform(), mailmsg() and reply_by_mail() functions in + * LYMail.c, and printfile() function in LYPrint.c, may be + * required. + */ +#define SYSTEM_MAIL "PMDF SEND" +#define SYSTEM_MAIL_FLAGS "/headers" +/* #define SYSTEM_MAIL "MAIL" */ +/* #define SYSTEM_MAIL_FLAGS "" */ + +/************************* + * Below is the argument for an sprintf command that will add + * "IN%""ADDRESS""" to the Internet mail address given by the user. + * It is structured for PMDF's IN%"INTERNET_ADDRESS" scheme. The %s + * is replaced with the address given by the user. If you are using + * a different Internet mail transport, change the IN appropriately + * (e.g., to SMTP, MX, or WINS), here or in lynx.cfg. + */ +#define MAIL_ADRS "\"IN%%\"\"%s\"\"\"" + +/********************************* + * On VMS, CSwing (an XTree emulation for VTxxx terminals) is intended for + * use as the Directory/File Manager (sources, objects, or executables are + * available from ftp://narnia.memst.edu/). CSWING_PATH should be defined + * here or in lynx.cfg to your foreign command for CSwing, with any + * regulatory switches you want included. If not defined, or defined as + * a zero-length string ("") or "none" (case-insensitive), the support + * will be disabled. It will also be disabled if the -nobrowse or + * -selective switches are used, or if the file_url restriction is set. + * + * When enabled, the DIRED_MENU command (normally 'f' or 'F') will invoke + * CSwing, normally with the current default directory as an argument to + * position the user on that node of the directory tree. However, if the + * current document is a local directory listing, or a local file and not + * one of the temporary menu or list files, the associated directory will + * be passed as an argument, to position the user on that node of the tree. + */ +/* #define CSWING_PATH "swing" */ + +/********************************* + * If USE_FIXED_RECORDS is set to TRUE here and/or in lynx.cfg, Lynx will + * convert 'd'ownloaded binary files to FIXED 512 record format before saving + * them to disk or acting on a DOWNLOADER option. If set to FALSE, the + * headers of such files will indicate that they are Stream_LF with Implied + * Carriage Control, which is incorrect, and can cause downloading software + * to get confused and unhappy. If you do set it FALSE, you can use the + * FIXED512.COM command file, which is included in this distribution, to do + * the conversion externally. + */ +#define USE_FIXED_RECORDS TRUE /* convert binaries to FIXED 512 */ + +/******************************** + * If NO_ANONYMOUS_EMAIL is defined, Lynx will not offer to insert X-From + * and X_Personal_Name lines in the body of email messages. On VMS, the + * actual From and Personal Name (if defined for the account) headers always + * are those of the account running the Lynx image. If the account is not + * the one to which the recipient should reply, you can indicate the alternate + * address and personal name via the X-From and X_Personal_Name entries, but + * the recipient must explicitly send the reply to the X_From address, rather + * than using the VMS REPLY command (which will use the actual From address). + * + * This symbol constant might be defined on Unix for security reasons that + * don't apply on VMS. There is no security reason for defining this on VMS, + * but if you have no anonymous accounts (i.e., the From always will point to + * the actual user's email address, you can define it to avoid the bother of + * X-From and X_Personal_Name offers. + */ +/*#define NO_ANONYMOUS_EMAIL TRUE */ + +/************************** + * LYNX_LSS_FILE is the location and name of the default lynx + * character style sheet file. It is sought and processed at + * startup of Lynx only if experimental character style code has + * been compiled in, otherwise it will be ignored. Note that use + * of the character style option is _experimental_ AND _unsupported_. + * There is no documentation other than a sample lynx.lss file in + * the samples subdirectory. This code probably won't even work on + * VMS. You can define the location and name of this file via an + * environment variable, "lynx_lss", which will override the definition + * here. You can use '~' to refer to the user's home directory. The + * -lss command line switch will override these definitions. + */ +#ifndef LYNX_LSS_FILE +#define LYNX_LSS_FILE "Lynx_Dir:lynx.lss" +#endif /* LYNX_LSS_FILE */ + +/* + * FTP_FORMAT uses the same codes as LIST_FORMAT, but applies to files shown + * in an ftp listing. + */ +#define FTP_FORMAT "%d %-16.16t %a %K" + +/******************************************************************* + * Things you must change - non-VMS specific + * Section 1b). + */ +#else /* non-VMS: UNIX etc. */ + +/************************** + * NOTE: This variable is set by the configure script; editing changes will + * be ignored. + * + * LYNX_CFG_FILE is the location and name of the default lynx + * global configuration file. It is sought and processed at + * startup of Lynx, followed by a seek and processing of a + * personal RC file (.lynxrc in the user's HOME directory, + * created if the user saves values in the 'o'ptions menu). + * You also can define the location and name of the global + * configuration file via an environment variable, "LYNX_CFG", + * which will override the "LYNX_CFG_FILE" definition here. + * You can use '~' in either or both definitions if you want + * lynx.cfg treated as a personal configuration file. The + * -cfg command line switch will override these definitions. + * You can pass the compilation default via the Makefile. + * + * If you are building Lynx using the configure script, you should specify + * the default location of the configuration file via that script, since it + * also generates the makefile and install-cfg rules. + * + * Note that many implementations of telnetd allow passing of + * environment variables, which might be used by unscrupulous + * people to modify the environment in anonymous accounts. When + * making Lynx and Web access publicly available via anonymous + * accounts intended to run Lynx captively, be sure the wrapper + * uses the -cfg switch and specifies the startfile, rather than + * relying on the LYNX_CFG, LYNX_CFG_FILE, or WWW_HOME variables. + * + * Note that any SUFFIX or VIEWER mappings in the configuration + * file will be overridden by any suffix or viewer mappings + * that are established as defaults in src/HTInit.c. You can + * override the src/HTInit.c defaults via the mime.types and + * mailcap files (see the examples in the samples directory). + */ +#ifndef HAVE_CONFIG_H +#ifndef LYNX_CFG_FILE +#ifdef DOSPATH +#define LYNX_CFG_PATH "." +#define LYNX_CFG_FILE "./lynx.cfg" +#else +#define LYNX_CFG_PATH "/usr/local/lib" +#define LYNX_CFG_FILE "/usr/local/lib/lynx.cfg" +#endif /* DOSPATH */ +#endif /* LYNX_CFG_FILE */ +#endif /* HAVE_CONFIG_H */ + +#ifndef MIME_LIBDIR +#define MIME_LIBDIR "/etc/" +#endif + +/************************** + * The EXTENSION_MAP file allows you to map file suffixes to + * mime types. + * The file locations defined here can be overridden in lynx.cfg. + * Mappings in these global and personal files override any SUFFIX + * definitions in lynx.cfg and built-in defaults from src/HTInit.c. + */ +#define GLOBAL_EXTENSION_MAP MIME_LIBDIR "mime.types" +#define PERSONAL_EXTENSION_MAP "~/.mime.types" + +/************************** + * The MAILCAP file allows you to map file MIME types to + * external viewers. + * The file locations defined here can be overridden in lynx.cfg. + * Mappings in these global and personal files override any VIEWER + * definitions in lynx.cfg and built-in defaults from src/HTInit.c. + */ +#define GLOBAL_MAILCAP MIME_LIBDIR "mailcap" +#define PERSONAL_MAILCAP "~/.mailcap" + +/************************** + * XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c for + * viewing image content types when the DISPLAY environment variable + * is set. Make it the full path and name of the xli (also known as + * xloadimage or xview) command, or other image viewer. It can be + * anything that will handle GIF, TIFF and other popular image formats + * (xli does). The freeware distribution of xli is available in the + * ftp://ftp.x.org/contrib/ subdirectory. The shareware, xv, also is + * suitable. You must also have a "%s" for the filename; "&" for + * background is optional. The default defined here can be overridden + * in lynx.cfg, or via the global or personal mailcap files. + * Make this NULL if you don't have such a viewer or don't want to + * use any default viewers for image types. Note that open is used as + * the default for NeXT, instead of the XLOADIMAGE_COMMAND definition. + */ +#define XLOADIMAGE_COMMAND "xli %s &" + +/************************** + * For UNIX systems, SYSTEM_MAIL and SYSTEM_MAIL_FLAGS are set by the + * configure-script. + */ + +/************************** + * A place to put temporary files, it is almost always in "/tmp/" + * for UNIX systems. If you include "$USER" in the definition + * (e.g., "/tmp/$USER"), Lynx will replace the "$USER" with the + * username of the account which invoked the Lynx image. Such + * directories should already exist, and have protections/ACLs set + * so that only the appropriate user(s) will have read/write access. + * If the path includes a tilde (e.g, "~" or "~/lynxtmp"), Lynx will + * replace the tilde with the full path for the user's home. + * The definition here can be overridden at run time by setting a + * "LYNX_TEMP_SPACE" environment variable, or (if that is not set) + * the "TMPDIR" (unix), or "TEMP" or "TMP" (Windows,DOS,OS/2) + * variable. + */ +#define TEMP_SPACE "/tmp/" + +/******************************** + * Comment this line out to disable code that implements command logging + * and scripting. + */ +#define USE_CMD_LOGGING 1 + +/******************************** + * Comment this line out to disable code that randomizes the names given to + * temporary files. + */ +#define USE_RAND_TEMPNAME 1 + +/******************************** + * Comment this line out to let the user enter his/her email address + * when sending a message. There should be no need to do this unless + * your mailer agent does not put in the From: field for you. (If your + * mailer agent does not automatically put in the From: field, you should + * upgrade, because anonymous mail makes it far too easy for a user to + * spoof someone else's email address.) + */ +/*#define NO_ANONYMOUS_EMAIL TRUE */ + +/******************************** + * LIST_FORMAT defines the display for local files when LONG_LIST + * is defined in the Makefile. The default set here can be changed + * in lynx.cfg. + * + * The percent items in the list are interpreted as follows: + * + * %p Unix-style permission bits + * %l link count + * %o owner of file + * %g group of file + * %d date of last modification + * %a anchor pointing to file or directory + * %A as above but don't show symbolic links + * %t type of file (description derived from MIME type) + * %T MIME type as known by Lynx (from mime.types or default) + * %k size of file in Kilobytes + * %K as above but omit size for directories + * %s size of file in bytes + * + * Anything between the percent and the letter is passed on to sprintf. + * A double percent yields a literal percent on output. Other characters + * are passed through literally. + * + * If you want only the filename: " %a" + * + * If you want a brief output: " %4K %-12.12d %a" + * + * For the Unix "ls -l" format: " %p %4l %-8.8o %-8.8g %7s %-12.12d %a" + */ +#ifdef DOSPATH +#define LIST_FORMAT " %4K %-12.12d %a" +#else +#define LIST_FORMAT " %p %4l %-8.8o %-8.8g %7s %-12.12d %a" +#endif + +/* + * FTP_FORMAT uses the same codes as LIST_FORMAT, but applies to files shown + * in an ftp listing. + */ +#define FTP_FORMAT "%d %-16.16t %a %K" + +/* + * If NO_FORCED_CORE_DUMP is set to TRUE, Lynx will not force + * core dumps via abort() calls on fatal errors or assert() + * calls to check potentially fatal errors. The default defined + * here can be changed in lynx.cfg, and the compilation or + * configuration default can be toggled via the -core command + * line switch. + */ +#define NO_FORCED_CORE_DUMP FALSE + +/************************** + * LYNX_LSS_FILE is the location and name of the default lynx + * character style sheet file. It is sought and processed at + * startup of Lynx only if experimental character style code + * has been compiled in, otherwise it will be ignored. Note + * that use of the character style option is _experimental_ AND + * _unsupported_. There is no documentation other than a sample + * lynx.lss file in the samples subdirectory. You also can + * define the location and name of this file via environment + * variables "LYNX_LSS" or "lynx_lss" which will override the + * "LYNX_LSS_FILE" definition here. You can use '~' in either or + * both definitions to refer to the user's home directory. The + * -lss command line switch will override these definitions. + */ +#ifndef LYNX_LSS_FILE +#ifdef DOSPATH +#define LYNX_LSS_FILE "lynx.lss" +#else +#define LYNX_LSS_FILE "/usr/local/lib/lynx.lss" +#endif +#endif /* LYNX_LSS_FILE */ + +#endif /* VMS OR UNIX */ + +/************************************************************* + * Section 1c) Every platform must change or verify these + * + */ + +/***************************** + * STARTFILE is the default starting URL if none is specified + * on the command line or via a WWW_HOME environment variable; + * Lynx will refuse to start without a starting URL of some kind. + * STARTFILE can be remote, e.g., http://www.w3.org/default.html , + * or local, e.g., file://localhost/PATH_TO/FILENAME , + * where PATH_TO is replaced with the complete path to FILENAME + * using Unix shell syntax and including the device on VMS. + * + * Normally we expect you will connect to a remote site, e.g., the Lynx starting + * site: + */ +#ifndef HOMEPAGE_URL +#define HOMEPAGE_URL "https://lynx.invisible-island.net/" +#endif +#define STARTFILE HOMEPAGE_URL +/* + * As an alternative, you may want to use a local URL. A good choice for this + * is the user's home directory: + *#define STARTFILE "file://localhost/~/" + * + * Your choice of STARTFILE should reflect your site's needs, and be a URL that + * you can connect to reliably. Otherwise users will become confused and think + * that they cannot run Lynx. + */ + +/***************************** + * HELPFILE must be defined as a URL and must have a + * complete path if local: + * file://localhost/PATH_TO/lynx_help/lynx_help_main.html + * Replace PATH_TO with the path to the lynx_help subdirectory + * for this distribution (use SHELL syntax including the device + * on VMS systems). + * The default HELPFILE is: + * https://lynx.invisible-island.net/lynx_help/lynx_help_main.html + * This should be changed here or in lynx.cfg to the local path. + * The definition here can be overridden at run time by defining a + * "LYNX_HELPFILE" environment variable. + */ +#define HELPFILE "https://lynx.invisible-island.net/lynx_help/lynx_help_main.html" +/* #define HELPFILE "file://localhost/PATH_TO/lynx_help/lynx_help_main.html" */ + +/***************************** + * DEFAULT_INDEX_FILE is the default file retrieved when the + * user presses the 'I' key when viewing any document. + * An index to your CWIS can be placed here or a document containing + * pointers to lots of interesting places on the web. + */ +#define DEFAULT_INDEX_FILE "http://scout.wisc.edu/" + +/***************************** + * If USE_TRACE_LOG is set FALSE, then when TRACE mode is invoked the + * syserr messages will not be directed to a log file named Lynx.trace + * in the account's HOME directory. The default defined here can be + * toggled via the -tlog command line switch. Also, it is set FALSE + * automatically when Lynx is executed in an anonymous or validation + * account (if indicated via the -anonymous or -validate command line + * switches, or via the check for the ANONYMOUS_USER, defined below). + * When FALSE, the TRACE_LOG command (normally ';') cannot be used to + * examine the Lynx Trace Log during the current session. If left + * TRUE, but you wish to use command line piping of stderr to a file + * you specify, include the -tlog toggle on the command line. Note + * that once TRACE mode is turned on during a session and stderr is + * directed to the log, all stderr messages will continue going to + * the log, even if TRACE mode is turned off via the TOGGLE_TRACE + * (Control-T) command. + */ +#define USE_TRACE_LOG TRUE + +/******************************* + * If GOTOBUFFER is set to TRUE here or in lynx.cfg the last entered + * goto URL, if any, will be offered as a default for reuse or editing + * when the 'g'oto command is entered. All previously used goto URLs + * can be accessed for reuse or editing via a circular buffer invoked + * with the Up-Arrow or Down-Arrow keys after entering the 'g'oto + * command, whether or not a default is offered. + */ +#define GOTOBUFFER FALSE + +/***************************** + * If FTP_PASSIVE is set to TRUE here or in lynx.cfg, ftp transfers will + * be done in passive mode. + * Note: if passive transfers fail, lynx falls back to active mode, and + * vice versa if active transfers fail at first. + */ +#define FTP_PASSIVE TRUE + +/***************************** + * JUMPFILE is the default local file checked for shortcut URLs when + * the user presses the 'J' (JUMP) key. The user will be prompted for + * a shortcut entry (analogously to 'g'oto), and can enter one + * or use '?' for a list of the shortcuts with associated links to + * their actual URLs. See the sample jumps files in the samples + * subdirectory. Make sure your jumps file includes a '?' shortcut + * for a file://localhost URL to itself: + * + * <dt>?<dd><a href="file://localhost/path/jumps.html">This Shortcut List</a> + * + * If not defined here or in lynx.cfg, the JUMP command will invoke + * the NO_JUMPFILE status line message (see LYMessages_en.h). The prompt + * associated with the default jumps file is defined as JUMP_PROMPT in + * LYMessages_en.h and can be modified in lynx.cfg. Additional, alternate + * jumps files can be defined and mapped to keystrokes, and alternate + * prompts can be set for them, in lynx.cfg, but at least one default + * jumps file and associated prompt should be established before adding + * others. + * + * On VMS, use Unix SHELL syntax (including a lead slash) to define it. + * + * Do not include "file://localhost" in the definition. + */ +/* #define JUMPFILE "/Lynx_Dir/jumps.html" */ + +/******************************* + * If JUMPBUFFER is set to TRUE here or in lynx.cfg the last entered + * jump shortcut, if any, will be offered as a default for reuse or + * editing when the JUMP command is entered. All previously used + * shortcuts can be accessed for reuse or editing via a circular buffer + * invoked with the Up-Arrow or Down-Arrow keys after entering the JUMP + * command, whether or not a default is offered. If you have multiple + * jumps files and corresponding key mappings, each will have its own + * circular buffer. + */ +#define JUMPBUFFER FALSE + +/******************************** + * If PERMIT_GOTO_FROM_JUMP is defined, then a : or / in a jump target + * will be treated as a full or partial URL (to be resolved versus the + * startfile), and will be handled analogously to a 'g'oto command. + * Such "random URLs" will be entered in the circular buffer for goto + * URLs, not the buffer for jump targets (shortcuts). If the target + * is the single character ':', it will be treated equivalently to an + * Up-Arrow or Down-Arrow following a 'g'oto command, for accessing the + * circular buffer of goto URLs. + */ +/* #define PERMIT_GOTO_FROM_JUMP */ + +/***************************** + * If LYNX_HOST_NAME is defined here and/or in lynx.cfg, it will be + * treated as an alias for the local host name in checks for URLs on + * the local host (e.g., when the -localhost switch is set), and this + * host name, "localhost", and HTHostName (the fully qualified domain + * name of the system on which Lynx is running) will all be passed as + * local. A different definition in lynx.cfg will override this one. + */ +/* #define LYNX_HOST_NAME "localhost" */ + +/********************* + * LOCAL_DOMAIN is used for a tail match with the ut_host element of + * the utmp or utmpx structure on systems with utmp capabilities, to + * determine if a user is local to your campus or organization when + * handling -restrictions=inside_foo or outside_foo settings for ftp, + * news, telnet/tn3270 and rlogin URLs. An "inside" user is assumed + * if your system does not have utmp capabilities. CHANGE THIS here + * or in lynx.cfg. + */ +#define LOCAL_DOMAIN "localdomain" + +/******************************** +* The DEFAULT_CACHE_SIZE specifies the number of WWW documents to be +* cached in memory at one time. +* +* This so-called cache size (actually, number) may be modified in lynx.cfg +* and or with the command line argument -cache=NUMBER The minimum allowed +* value is 2, for the current document and at least one to fetch, and there +* is no absolute maximum number of cached documents. On Unix, and VMS not +* compiled with VAXC, whenever the number is exceeded the least recently +* displayed document will be removed from memory. +* +* On VMS compiled with VAXC, the DEFAULT_VIRTUAL_MEMORY_SIZE specifies the +* amount (bytes) of virtual memory that can be allocated and not yet be freed +* before previous documents are removed from memory. If the values for both +* the DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE are exceeded, then +* least recently displayed documents will be freed until one or the other +* value is no longer exceeded. The value can be modified in lynx.cfg. +* +* The Unix and VMS but not VAXC implementations use the C library malloc's +* and calloc's for memory allocation, and procedures for taking the actual +* amount of cache into account still need to be developed. They use only +* the DEFAULT_CACHE_SIZE value, and that specifies the absolute maximum +* number of documents to cache (rather than the maximum number only if +* DEFAULT_VIRTUAL_MEMORY_SIZE has been exceeded, as with VAXC/VAX). +*/ +#define DEFAULT_CACHE_SIZE 10 + +#if defined(VMS) && defined(VAXC) && !defined(__DECC) +#define DEFAULT_VIRTUAL_MEMORY_SIZE 512000 +#endif /* VMS && VAXC && !__DECC */ + +/******************************** + * If ALWAYS_RESUBMIT_POSTS is set TRUE, Lynx always will resubmit forms + * with method POST, dumping any cache from a previous submission of the + * form, including when the document returned by that form is sought with + * the PREV_DOC command or via the history list. Lynx always resubmits + * forms with method POST when a submit button or a submitting text input + * is activated, but normally retrieves the previously returned document + * if it had links which you activated, and then go back with the PREV_DOC + * command or via the history list. + * + * The default defined here can be changed in lynx.cfg, and can be toggled + * via the -resubmit_posts command line switch. + */ +#define ALWAYS_RESUBMIT_POSTS FALSE + +/******************************** + * CHARACTER_SET defines the default character set, i.e., that assumed + * to be installed on the user's terminal. It determines which characters + * or strings will be used to represent 8-bit character entities within + * HTML. New character sets may be defined as explained in the README + * files of the src/chrtrans directory in the Lynx source code distribution. + * For Asian (CJK) character sets, it also determines how Kanji code will + * be handled. The default defined here can be changed in lynx.cfg, and + * via the 'o'ptions menu. The 'o'ptions menu setting will be stored in + * the user's RC file whenever those settings are saved, and thereafter + * will be used as the default. Also see lynx.cfg for information about + * the -raw switch and LYK_RAW_TOGGLE command. + * + * Since Lynx now supports a wide range of platforms it may be useful + * to note that cpXXX codepages used by IBM PC compatible computers, + * and windows-xxxx used by native MS-Windows apps. + * + * Recognized character sets include: + * + * string for 'O'ptions Menu MIME name + * =========================== ========= + * 7 bit approximations (US-ASCII) us-ascii + * Western (ISO-8859-1) iso-8859-1 + * Western (cp850) cp850 + * Western (windows-1252) windows-1252 + * IBM PC US codepage (cp437) cp437 + * DEC Multinational dec-mcs + * Macintosh (8 bit) macintosh + * NeXT character set next + * HP Roman8 hp-roman8 + * Chinese euc-cn + * Japanese (EUC-JP) euc-jp + * Japanese (Shift_JIS) shift_jis + * Korean euc-kr + * Taipei (Big5) big5 + * Vietnamese (VISCII) viscii + * Eastern European (ISO-8859-2) iso-8859-2 + * Eastern European (cp852) cp852 + * Eastern European (windows-1250) windows-1250 + * Latin 3 (ISO-8859-3) iso-8859-3 + * Latin 4 (ISO-8859-4) iso-8859-4 + * Baltic Rim (cp775) cp775 + * Baltic Rim (windows-1257) windows-1257 + * Cyrillic (ISO-8859-5) iso-8859-5 + * Cyrillic (cp866) cp866 + * Cyrillic (windows-1251) windows-1251 + * Cyrillic (KOI8-R) koi8-r + * Arabic (ISO-8859-6) iso-8859-6 + * Arabic (cp864) cp864 + * Arabic (windows-1256) windows-1256 + * Greek (ISO-8859-7) iso-8859-7 + * Greek (cp737) cp737 + * Greek2 (cp869) cp869 + * Greek (windows-1253) windows-1253 + * Hebrew (ISO-8859-8) iso-8859-8 + * Hebrew (cp862) cp862 + * Hebrew (windows-1255) windows-1255 + * Turkish (ISO-8859-9) iso-8859-9 + * ISO-8859-10 iso-8859-10 + * Ukrainian Cyrillic (cp866u) cp866u + * Ukrainian Cyrillic (KOI8-U) koi8-u + * UNICODE (UTF-8) utf-8 + * RFC 1345 w/o Intro mnemonic+ascii+0 + * RFC 1345 Mnemonic mnemonic + * Transparent x-transparent + */ +#define CHARACTER_SET "iso-8859-1" + +/***************************** + * PREFERRED_LANGUAGE is the language in MIME notation (e.g., "en", + * "fr") which will be indicated by Lynx in its Accept-Language headers + * as the preferred language. If available, the document will be + * transmitted in that language. This definition can be overridden via + * lynx.cfg. Users also can change it via the 'o'ptions menu and save + * that preference in their RC file. This may be a comma-separated list + * of languages in decreasing preference. + */ +#define PREFERRED_LANGUAGE "en" + +/***************************** + * PREFERRED_CHARSET specifies the character set in MIME notation (e.g., + * "ISO-8859-2", "ISO-8859-5") which Lynx will indicate you prefer in + * requests to http servers using an Accept-Charsets header. + * This definition can be overridden via lynx.cfg. Users also can change it + * via the 'o'ptions menu and save that preference in their RC file. + * The value should NOT include "ISO-8859-1" or "US-ASCII", since those + * values are always assumed by default. + * If a file in that character set is available, the server will send it. + * If no Accept-Charset header is present, the default is that any + * character set is acceptable. If an Accept-Charset header is present, + * and if the server cannot send a response which is acceptable + * according to the Accept-Charset header, then the server SHOULD send + * an error response with the 406 (not acceptable) status code, though + * the sending of an unacceptable response is also allowed. (RFC2068) + */ +#define PREFERRED_CHARSET "" + +/***************************** +* If MULTI_BOOKMARK_SUPPORT is set to MBM_STANDARD or MBM_ADVANCED, and +* BLOCK_MULTI_BOOKMARKS (see below) is FALSE, and sub-bookmarks exist, all +* bookmark operations will first prompt the user to select an active +* sub-bookmark file or the default bookmark file. MBM_OFF is the default so +* that one (the default) bookmark file will be available initially. The +* default set here can be overridden in lynx.cfg. The user can turn on +* multiple bookmark support via the 'o'ptions menu, and can save that choice as +* the startup default via the .lynxrc file. When on, the setting can be +* STANDARD or ADVANCED. If support is set to the latter, and the user mode +* also is ADVANCED, the VIEW_BOOKMARK command will invoke a status line prompt +* at which the user can enter the letter token (A - Z) of the desired bookmark, +* or '=' to get a menu of available bookmark files. The menu always is +* presented in NOVICE or INTERMEDIATE mode, or if the support is set to +* STANDARD. No prompting or menu display occurs if only one (the startup +* default) bookmark file has been defined (define additional ones via the +* 'o'ptions menu). The startup default, however set, can be overridden on the +* command line via the -restrictions=multibook or the -anonymous or -validate +* switches. +*/ +#ifndef MULTI_BOOKMARK_SUPPORT +#define MULTI_BOOKMARK_SUPPORT MBM_OFF +#endif /* MULTI_BOOKMARK_SUPPORT */ + +/***************************** +* If BLOCK_MULTI_BOOKMARKS is set TRUE, multiple bookmark support will +* be forced off, and cannot be toggled on via the 'o'ptions menu. This +* compilation setting can be overridden via lynx.cfg. +*/ +#ifndef BLOCK_MULTI_BOOKMARKS +#define BLOCK_MULTI_BOOKMARKS FALSE +#endif /* BLOCK_MULTI_BOOKMARKS */ + +/******************************** + * URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES are strings which will be + * prepended (together with a scheme://) and appended to the first element + * of command line or 'g'oto arguments which are not complete URLs and + * cannot be opened as a local file (file://localhost/string). Both + * can be comma-separated lists. Each prefix must end with a dot, each + * suffix must begin with a dot, and either may contain other dots (e.g., + * .co.jp). The default lists are defined here, and can be changed + * in lynx.cfg. Each prefix will be used with each suffix, in order, + * until a valid Internet host is created, based on a successful DNS + * lookup (e.g., foo will be tested as www.foo.com and then www.foo.edu + * etc.). The first element can include a :port and/or /path which will + * be restored with the expanded host (e.g., wfbr:8002/dir/lynx will + * become http://www.wfbr.edu:8002/dir/lynx). The prefixes will not be + * used if the first element ends in a dot (or has a dot before the + * :port or /path), and similarly the suffixes will not be used if the + * the first element begins with a dot (e.g., .nyu.edu will become + * http://www.nyu.edu without testing www.nyu.com). Lynx will try to + * guess the scheme based on the first field of the expanded host name, + * and use "http://" as the default (e.g., gopher.wfbr.edu or gopher.wfbr. + * will be made gopher://gopher.wfbr.edu). + */ +#define URL_DOMAIN_PREFIXES "www." +#define URL_DOMAIN_SUFFIXES ".com,.edu,.net,.org" + +/******************************** + * If LIST_NEWS_NUMBERS is set TRUE, Lynx will use an ordered list + * and include the numbers of articles in news listings, instead of + * using an unordered list. + * + * The default defined here can be changed in lynx.cfg. + */ +#define LIST_NEWS_NUMBERS FALSE + +/******************************** + * If LIST_NEWS_DATES is set TRUE, Lynx will include the dates of + * articles in news listings. The dates always are included in the + * articles, themselves. + * + * The default defined here can be changed in lynx.cfg. + */ +#define LIST_NEWS_DATES FALSE + +/************************* + * Set NEWS_POSTING to FALSE if you do not want to support posting to + * news groups via Lynx. If left TRUE, Lynx will use its news gateway to + * post new messages or followups to news groups, using the URL schemes + * described in the "Supported URL" section of the online 'h'elp. The + * posts will be attempted via the nntp server specified in the URL, or + * if none was specified, via the NNTPSERVER configuration or environment + * variable. Links with these URLs for posting or sending followups are + * created by the news gateway when reading group listings or articles + * from nntp servers if the server indicates that it permits posting. + * The setting here can be changed in lynx.cfg. + */ +#define NEWS_POSTING TRUE + +/************************* + * Define LYNX_SIG_FILE to the name of a file containing a signature which + * can be appended to email messages and news postings or followups. The + * user will be prompted whether to append it. It is sought in the home + * directory. If it is in a subdirectory, begin it with a dot-slash + * (e.g., ./lynx/.lynxsig). The definition here can be changed in lynx.cfg. + */ +#define LYNX_SIG_FILE ".lynxsig" + +/******************************** + * BIBP_GLOBAL_SERVER is the default global server for bibp: links, used + * when a local bibhost or document-specified citehost is unavailable. + */ +#define BIBP_GLOBAL_SERVER "http://usin.org/" + +/******************************** + * If USE_SELECT_POPUPS is set FALSE, Lynx will present a vertical list + * of radio buttons for the OPTIONs in SELECT blocks which lack the + * MULTIPLE attribute, instead of using a popup menu. Note that if + * the MULTIPLE attribute is present in the SELECT start tag, Lynx + * always will create a vertical list of checkboxes for the OPTIONs. + * + * The default defined here can be changed in lynx.cfg. It can be + * set and saved via the 'o'ptions menu to override the compilation + * and configuration defaults, and the default always can be toggled + * via the -popup command line switch. + */ +#define USE_SELECT_POPUPS TRUE + +/******************************** + * If COLLAPSE_BR_TAGS is set FALSE, Lynx will not collapse serial + * BR tags. If set TRUE, two or more concurrent BRs will be collapsed + * into a single blank line. Note that the valid way to insert extra + * blank lines in HTML is via a PRE block with only newlines in the + * block. + * + * The default defined here can be changed in lynx.cfg. + */ +#define COLLAPSE_BR_TAGS TRUE + +/******************************** + * If SET_COOKIES is set FALSE, Lynx will ignore Set-Cookie headers + * in http server replies. + * + * The default defined here can be changed in lynx.cfg, and can be toggled + * via the -cookies command line switch. + */ +#define SET_COOKIES TRUE + +/******************************** + * If SEND_USERAGENT is set FALSE, Lynx will not send a user-agent string. + * You can override this in the 'O'ptions menu. + */ +#define SEND_USERAGENT TRUE + +/******************************* + * If ACCEPT_ALL_COOKIES is set TRUE, and SET_COOKIES is TRUE, Lynx will + * accept all cookies. + * + * The default defined here can be changed in lynx.cfg, and .lynxrc, or + * toggled via the -accept_all_cookies command line switch. + */ +#define ACCEPT_ALL_COOKIES FALSE + +/**************************************************************** + * Section 2. Things that you probably want to change or review + * + */ + +/***************************** + * The following three definitions set the number of seconds for + * pauses following status line messages that would otherwise be + * replaced immediately, and are more important than the unpaused + * progress messages. Those set by INFOSECS are also basically + * progress messages (e.g., that a prompted input has been canceled) + * and should have the shortest pause. Those set by MESSAGESECS are + * informational (e.g., that a function is disabled) and should have + * a pause of intermediate duration. Those set by ALERTSECS typically + * report a serious problem and should be paused long enough to read + * whenever they appear (typically unexpectedly). The default values + * defined here can be modified via lynx.cfg, should longer pauses be + * desired for braille-based access to Lynx. + */ +#define INFOSECS 1 +#define MESSAGESECS 2 +#define ALERTSECS 3 + +#define DEBUGSECS 0 +#define REPLAYSECS 0 + +/****************************** + * SHOW_COLOR controls whether the program displays in color by default. + */ +#ifdef COLOR_CURSES +#define SHOW_COLOR TRUE +#else +#define SHOW_COLOR FALSE +#endif + +/****************************** + * SHOW_CURSOR controls whether or not the cursor is hidden or appears + * over the current link, or current option in select popup windows. + * Showing the cursor is handy if you are a sighted user with a poor + * terminal that can't do bold and reverse video at the same time or + * at all. It also can be useful to blind users, as an alternative + * or supplement to setting LINKS_AND_FIELDS_ARE_NUMBERED or + * LINKS_ARE_NUMBERED. + * + * The default defined here can be changed in lynx.cfg. It can be + * set and saved via the 'o'ptions menu to override the compilation + * and configuration defaults, and the default always can be toggled + * via the -show_cursor command line switch. + */ +#define SHOW_CURSOR FALSE + +/****************************** +* UNDERLINE_LINKS controls whether links are underlined by default, or shown +* in bold. Normally this default is set from the configure script. +*/ +#ifndef HAVE_CONFIG_H +#define UNDERLINE_LINKS FALSE +#endif + +/****************************** +* VERBOSE_IMAGES controls whether or not Lynx replaces the [LINK], [INLINE] +* and [IMAGE] comments (for images without ALT) with filenames of these +* images. This is extremely useful because now we can determine immediately +* what images are just decorations (button.gif, line.gif) and what images are +* important. +* +* The default defined here can be changed in lynx.cfg. +*/ +#define VERBOSE_IMAGES TRUE + +/****************************** + * BOXVERT and BOXHORI control the layout of popup menus. Set to 0 if your + * curses supports line-drawing characters, set to '*' or any other character + * to not use line-drawing (e.g., '|' for vertical and '-' for horizontal). + */ +#ifndef HAVE_CONFIG_H +#ifdef DOSPATH +#define BOXVERT 0 +#define BOXHORI 0 +#else +#define BOXVERT '|' +/* #define BOXVERT 0 */ +#define BOXHORI '-' +/* #define BOXHORI 0 */ +#endif /* DOSPATH */ +#endif /* !HAVE_CONFIG_H */ + +/****************************** + * LY_UMLAUT controls the 7-bit expansion of characters with dieresis or + * umlaut. If defined, a digraph is displayed, e.g., auml --> ae + * Otherwise, a single character is displayed, e.g., auml --> a + * Note that this is currently not supported with the chartrans code, + * or rather it doesn't have an effect if translations for a display + * character set are taken from one of the *.tbl files in src/chrtrans. + * One would have to modify the corresponding *.tbl file to change the + # 7-bit replacements for these characters. + */ +#define LY_UMLAUT + +/******************************* + * Execution links/scripts configuration. + * + * Execution links and scripts allow you to run + * local programs by activating links within Lynx. + * + * An execution link is of the form: + * + * lynxexec:<COMMAND> + * or: + * lynxexec://<COMMAND> + * or: + * lynxprog:<COMMAND> + * or: + * lynxprog://<COMMAND> + * + * where <COMMAND> is a command that Lynx will run when the link is + * activated. The double-slash should be included if the command begins + * with an '@', as for executing VMS command files. Otherwise, the double- + * slash can be omitted. + * Use lynxexec for commands or scripts that generate a screen output which + * should be held via a prompt to press <return> before returning to Lynx + * for display of the current document. + * Use lynxprog for programs such as mail which do not require a pause before + * Lynx restores the display of the current document. + * + * Execution scripts take the form of a standard + * URL. Extension mapping or MIME typing is used + * to decide if the file is a script and should be + * executed. The current extensions are: + * .csh, .ksh, and .sh on UNIX systems and .com on + * VMS systems. Any time a file of this type is + * accessed Lynx will look at the user's options + * settings to decide if the script can be executed. + * Current options include: Only exec files that + * reside on the local machine and are referenced + * with a "file://localhost" URL, All execution + * off, and all execution on. + * + * The following definitions will add execution + * capabilities to Lynx. You may define none, one + * or both. + * + * I strongly recommend that you define neither one + * of these since execution links/scripts can represent + * very serious security risk to your system and its + * users. If you do define these I suggest that + * you only allow users to execute files/scripts + * that reside on your local machine. + * + * YOU HAVE BEEN WARNED! + * + * Note: if you are enabling execution scripts you should + * also see src/HTInit.c to verify/change the execution + * script extensions and/or commands. + */ +/* #define EXEC_LINKS */ +/* #define EXEC_SCRIPTS */ + +#if defined(EXEC_LINKS) || defined(EXEC_SCRIPTS) + +/********** + * if ENABLE_OPTS_CHANGE_EXEC is defined, the user will be able to change + * the execution status within the Options Menu. + */ +/* #define ENABLE_OPTS_CHANGE_EXEC */ + +/********** + * if NEVER_ALLOW_REMOTE_EXEC is defined, + * local execution of scripts or lynxexec & lynxprog URLs will be implemented + * only from HTML files that were accessed via a "file://localhost/" URL + * and the Options Menu for "Local executions links" will allow toggling + * only between "ALWAYS OFF" and "FOR LOCAL FILES ONLY". + */ +/* #define NEVER_ALLOW_REMOTE_EXEC */ + +/***************************** + * These are for executable shell scripts and links. + * Set to FALSE unless you really know what you're + * doing. + * + * This only applies if you are compiling with EXEC_LINKS or + * EXEC_SCRIPTS defined. + * + * The first two settings: + * LOCAL_EXECUTION_LINKS_ALWAYS_ON + * LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE + * specify the DEFAULT settings of the users execution link + * options (they can also be overridden in lynx.cfg), but + * the user may still change those options. + * If you do not wish the user to be able to change the + * execution link settings you may wish to use the command line option: + * -restrictions=exec_frozen + * + * LOCAL_EXECUTION_LINKS_ALWAYS_ON will be FALSE + * if NEVER_ALLOW_REMOTE_EXEC has been defined. + * + * if LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS is true, + * all execution links will be disabled when the -anonymous + * command-line option is used. Anonymous users are not allowed + * to change the execution options from within the Lynx Options Menu, + * so you might be able to use this option to enable execution links + * and set LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE to TRUE + * to give anonymous execution-link capability without compromising + * your system (see comments about TRUSTED_EXEC rules in lynx.cfg ). + */ + +#define LOCAL_EXECUTION_LINKS_ALWAYS_ON FALSE +#define LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE FALSE +#define LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS FALSE + +#endif /* defined(EXEC_LINKS) || defined(EXEC_SCRIPTS) */ + +/********** + * *** This is for those -- e.g. DOS users -- who do not have configure; + * *** others should use the configure switch --enable-lynxcgi-links . + * + * UNIX: + * ===== + * CGI script support. Defining LYNXCGI_LINKS allows you to use the + * + * lynxcgi:path + * + * URL which allows lynx to access a cgi script directly without the need for + * a http daemon. Redirection is not supported but just about everything + * else is. If the path is not an executable file then the URL is + * rewritten as file://localhost and passed to the file loader. This means + * that if your http:html files are currently set up to use relative + * addressing, you should be able to fire up your main page with lynxcgi:path + * and everything should work as if you were talking to the http daemon. + * + * Note that TRUSTED_LYNXCGI directives must be defined in your lynx.cfg file + * if you wish to place restrictions on source documents and/or paths for + * lynxcgi links. + * + * The cgi scripts are called with a fork()/execve() sequence so you don't + * have to worry about people trying to abuse the code. :-) + * + * George Lindholm (George.Lindholm@ubc.ca) + * + * VMS: + * ==== + * The lynxcgi scheme, if enabled, yields an informational message regardless + * of the path, and use of the freeware OSU DECthreads server as a local + * script server is recommended instead of lynxcgi URLs. Uncomment the + * following line to define LYNXCGI_LINKS, and when running Lynx, enter + * lynxcgi:advice as a G)oto URL for more information and links to the + * OSU server distribution. + */ +#ifndef HAVE_CONFIG_H +/* #define LYNXCGI_LINKS */ +#endif + +/********************************* + * MAIL_SYSTEM_ERROR_LOGGING will send a message to the owner of + * the information if there is one, every time + * that a document cannot be accessed! + * This is just the default, it can be changed in lynx.cfg, and error + * logging can be turned off with the -nolog command line option. + * + * NOTE: This can generate A LOT of mail, be warned. + */ +#define MAIL_SYSTEM_ERROR_LOGGING FALSE /*mail a message for every error? */ + +/********************************* + * If a document cannot be accessed, and MAIL_SYSTEM_ERROR_LOGGING + * is on and would send a message to the owner of the information, + * but no owner is known, then the message will be sent to ALERTMAIL + * instead - if it is defined as a non-empty email address. + * + * NOTE: This can generate A REAL LOT of mail, be warned!!! + */ +/* #define ALERTMAIL "webmaster@localhost" */ /*error recipient if no owner */ + +/********************************* + * If CHECKMAIL is set to TRUE, the user will be informed (via a status line + * message) about the existence of any unread mail at startup of Lynx, and + * will get status line messages if subsequent new mail arrives. If a jumps + * file with a lynxprog URL for invoking mail is available, or your html + * pages include an mail launch file URL, the user thereby can access mail + * and read the messages. + * This is just the default, it can be changed in lynx.cfg. The checks and + * status line reports will not be performed if Lynx has been invoked with + * the -restrictions=mail switch. + * + * VMS USERS !!! + * New mail is normally broadcast as it arrives, via "unsolicited screen + * broadcasts", which can be "wiped" from the Lynx display via the Ctrl-W + * command. You may prefer to disable the broadcasts and use CHECKMAIL + * instead (e.g., in a public account which will be used by people who + * are ignorant about VMS). + */ +#define CHECKMAIL FALSE /* report unread and new mail messages */ + +/********************************* + * Vi or Emacs movement keys. These are defaults, + * which can be changed in lynx.cfg , the Options Menu or .lynxrc . + */ +#define VI_KEYS_ALWAYS_ON FALSE /* familiar h j k l */ +#define EMACS_KEYS_ALWAYS_ON FALSE /* familiar ^N ^P ^F ^B */ + +/********************************* + * DEFAULT_KEYPAD_MODE may be set to NUMBERS_AS_ARROWS + * or LINKS_ARE_NUMBERED + * or LINKS_AND_FIELDS_ARE_NUMBERED + * to specify whether numbers (e.g. [10]) appear before all links, + * allowing immediate access by entering the number on the keyboard, + * or numbers on the numeric key-pad work like arrows; + * the 3rd option causes form fields also to be preceded by numbers. + * The first two options (but not the last) can be changed in lynx.cfg + * and all three can be changed via the Options Menu. + */ +#define DEFAULT_KEYPAD_MODE NUMBERS_AS_ARROWS + +/******************************** + * The default search. + * This is a default that can be overridden in lynx.cfg or by the user! + */ +#define CASE_SENSITIVE_ALWAYS_ON FALSE /* case sensitive user search */ + +/******************************** + * If NO_DOT_FILES is set TRUE here or in lynx.cfg, the user will not be + * allowed to specify files beginning with a dot in reply to output filename + * prompts, and files beginning with a dot (e.g., file://localhost/foo/.lynxrc) + * will not be included in the directory browser's listings. The setting here + * will be overridden by the setting in lynx.cfg. If FALSE, you can force it + * to be treated as TRUE via -restrictions=dotfiles (or -anonymous, which sets + * this and most other restrictions). + * + * If it is FALSE at startup of Lynx, the user can regulate it via the + * 'o'ptions menu, and may save the preference in the RC file. + */ +#define NO_DOT_FILES TRUE /* disallow access to dot files */ + +/******************************** + * If MAKE_LINKS_FOR_ALL_IMAGES is TRUE, all images will be given links + * which can be ACTIVATEd. For inlines, the ALT or pseudo-ALT ("[INLINE]") + * strings will be links for the resolved SRC rather than just text. For + * ISMAP or other graphic links, the ALT or pseudo-ALT ("[ISMAP]" or "[LINK]") + * strings will have '-' and a link labeled "[IMAGE]" for the resolved SRC + * appended. See also VERBOSE_IMAGES flag. + * + * The default defined here can be changed in lynx.cfg, and the user can + * use LYK_IMAGE_TOGGLE to toggle the feature on or off at run time. + * + * The default also can be toggled via an "-image_links" command line switch. + */ +#define MAKE_LINKS_FOR_ALL_IMAGES FALSE /* inlines cast to links */ + +/******************************** + * If MAKE_PSEUDO_ALTS_FOR_INLINES is FALSE, inline images which do not + * specify an ALT string will not have "[INLINE]" inserted as a pseudo-ALT, + * i.e., they'll be treated as having ALT="". If MAKE_LINKS_FOR_ALL_IMAGES + * is defined or toggled to TRUE, however, the pseudo-ALTs will be created + * for inlines, so that they can be used as links to the SRCs. + * See also VERBOSE_IMAGES flag. + * + * The default defined here can be changed in lynx.cfg, and the user can + * use LYK_INLINE_TOGGLE to toggle the feature on or off at run time. + * + * The default also can be toggled via a "-pseudo_inlines" command line + * switch. + */ +#define MAKE_PSEUDO_ALTS_FOR_INLINES TRUE /* Use "[INLINE]" pseudo-ALTs */ + +/******************************** + * If SUBSTITUTE_UNDERSCORES is TRUE, the _underline_ format will be used + * for emphasis tags in dumps. + * + * The default defined here can be changed in lynx.cfg, and the user can + * toggle the default via a "-underscore" command line switch. + */ +#define SUBSTITUTE_UNDERSCORES FALSE /* Use _underline_ format in dumps */ + +/******************************** + * If QUIT_DEFAULT_YES is defined as TRUE then when the QUIT command + * is entered, any response other than n or N will confirm. Define it + * as FALSE if you prefer the more conservative action of requiring an + * explicit Y or y to confirm. The default defined here can be changed + * in lynx.cfg. + */ +#define QUIT_DEFAULT_YES TRUE + +/******************************** + * If TEXT_SUBMIT_CONFIRM_WANTED is defined (to anything), the user will be + * prompted for confirmation before Lynx submits a form with only one input + * field (of type text) to the server, after the user has pressed <return> + * or <enter> on the field. Since the is no other way such as a "submit" + * button to submit, normally the form gets submitted automatically in this + * case, but some users may find this surprising and expect <return> to just + * move to the next link as for other text entry fields. + */ +/* #define TEXT_SUBMIT_CONFIRM_WANTED */ + +/******************************** + * If TEXTFIELDS_MAY_NEED_ACTIVATION is defined (to anything), + * the option TEXTFIELDS_NEED_ACTIVATION in lynx.cfg or the command + * line option -tna can be used to require explicit activation + * before text input fields can be changed with the built-in line + * editor. + */ + +#define TEXTFIELDS_MAY_NEED_ACTIVATION + +/******************************** + * The following three definitions control some aspects of extended + * textarea handling. TEXTAREA_EXPAND_SIZE is the number of new empty + * lines that get appended at the end of a textarea by a GROWTEXTAREA + * key. If TEXTAREA_AUTOGROW is defined (to anything), <return> or + * <enter> in the last line of a textarea automatically extends the + * area by adding a new line. If TEXTAREA_AUTOEXTEDIT is defined (to + * anything), a key mapped to DWIMEDIT will invoke the external editor + * like EDITTEXTAREA when used in a text input field. Comment those + * last two definitions out to disable the corresponding behavior. + * See under KEYMAP in lynx.cfg for mapping keys to GROWTEXTAREA or + * DWIMEDIT actions. + */ +#define TEXTAREA_EXPAND_SIZE 5 +#define TEXTAREA_AUTOGROW +#define TEXTAREA_AUTOEXTEDIT + +/******************************** + * If BUILTIN_SUFFIX_MAPS is defined (to anything), default mappings + * for file extensions (aka suffixes) will be compiled in (see + * src/HTInit.c). By removing the definition, the default mappings + * are suppressed except for a few very basic ones for text/html. + * See GLOBAL_EXTENSION_MAP, PERSONAL_EXTENSION_MAP above and SUFFIX, + * SUFFIX_ORDER in lynx.cfg for other ways to map file extensions. + */ + +#define BUILTIN_SUFFIX_MAPS + +/******************************** + * These definitions specify files created or used in conjunction + * with traversals. See CRAWL.ANNOUNCE for more information. + */ +#define TRAVERSE_FILE "traverse.dat" +#define TRAVERSE_FOUND_FILE "traverse2.dat" +#define TRAVERSE_REJECT_FILE "reject.dat" +#define TRAVERSE_ERRORS "traverse.errors" + +/**************************************************************** + * The LYMessages_en.h header defines default, English strings + * used in status line prompts, messages, and warnings during + * program execution. See the comments in LYMessages_en.h for + * information on translating or customizing them for your site. + */ +#ifndef LYMESSAGES_EN_H +#include <LYMessages_en.h> +#endif /* !LYMESSAGES_EN_H */ + +/**************************************************************** + * DEFAULT_VISITED_LINKS may be set to one or more of + * VISITED_LINKS_AS_FIRST_V + * VISITED_LINKS_AS_TREE + * VISITED_LINKS_AS_LATEST + * VISITED_LINKS_REVERSE + * to change the organization of the Visited Links page. + * + * (Not all combinations are meaningful; see src/LYrcFile.c for a list + * in the visited_links_tbl table). + */ +#define DEFAULT_VISITED_LINKS (VISITED_LINKS_AS_LATEST | VISITED_LINKS_REVERSE) + +/**************************************************************** + * If USE_CACHEJAR is set to TRUE the user will be able to view, + * access and delete cached documents in current lynx session. + */ +#ifndef USE_CACHEJAR +/* #define USE_CACHEJAR TRUE */ +#endif + +/**************************************************************** + * If USE_SESSIONS is set to TRUE the user will be able to save, + * resume and in general manipulate with lynx sessions. + */ +#ifndef USE_SESSIONS +/* #define USE_SESSIONS TRUE */ +#endif + +#define MAX_SESSIONS 10000 + +/* + * If USE_SESSIONS is TRUE you may tune it fine how it will work: + */ +#define GOTOURL_IN_SESSION /* Allow to save goto url */ +#define GOTOURL_OUT_SESSION /* Allow to restore goto url */ +#define HISTORY_IN_SESSION /* Allow to save history */ +#define HISTORY_OUT_SESSION /* Allow to restore history */ +#define SEARCH_IN_SESSION /* Allow to save search string */ +#define SEARCH_OUT_SESSION /* Allow to restore search string */ +#define VLINK_IN_SESSION /* Allow to save visited link */ +#define VLINK_OUT_SESSION /* Allow to restore visited link */ + +/**************************************************************** + * The STATUSBUFSIZE defines how many entries will be stored in + * cyclic buffer of statusline messages. This is specially useful + * for users who use lynx on a terminal with more than 40 lines. + */ +/* #define STATUSBUFSIZE 90 */ + +/**************************************************************** + * If USE_PROGRESSBAR is TRUE the user will be able to set + * download progress as odometer(thermometer) display, ie: + * + * 80% IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII + * + */ +/* #define USE_PROGRESSBAR TRUE */ + +/**************************************************************** + * Section 3. Things that you should not change until you + * have a good knowledge of the program + */ + +#define LYNX_NAME "Lynx" +/* The strange-looking comments on the next line tell PRCS to replace + * the version definition with the Project Version on checkout. Just + * ignore it. - kw */ +/* $Format: "#define LYNX_VERSION \"$ProjectVersion$\""$ */ +#define LYNX_VERSION "2.8.9rel.1" +#define LYNX_WWW_HOME "https://lynx.invisible-island.net/" +#define LYNX_WWW_DIST "https://lynx.invisible-island.net/current/" +/* $Format: "#define LYNX_DATE \"$ProjectDate$\""$ */ +#define LYNX_DATE "Sun, 08 Jul 2018 06:46:06 -0400" +#define LYNX_DATE_OFF 5 /* truncate the automatically-generated date */ +#define LYNX_DATE_LEN 11 /* truncate the automatically-generated date */ + +#ifdef UNICODE +#define W32_STRING(s) L##s +#else +#define W32_STRING(s) s +#endif + +#define LYNX_SUBKEY W32_STRING("Software\\Lynx") + +#define LINESIZE 1024 /* max length of line to read from file */ +#define MAXLINKS 1024 /* max links on one screen */ + +#ifndef SEARCH_GOAL_LINE +#define SEARCH_GOAL_LINE 4 /* try to position search target there */ +#endif + +#define MAXCHARSETS 60 /* max character sets supported */ +#define TRST_MAXROWSPAN 200 /* max rowspan accepted by TRST code */ +#define TRST_MAXCOLSPAN 200 /* max colspan and COL/COLGROUP span accepted */ +#define MAX_TABLE_ROWS 200 /* max rows for tables */ +#define MAX_TABLE_COLS 200 /* max cols for tables */ +#define SAVE_TIME_NOT_SPACE /* minimize number of some malloc calls */ + +/* Win32 may support more, but old win16 helper apps may not. */ +#if defined(__DJGPP__) || defined(_WINDOWS) +#define FNAMES_8_3 +#endif + +#ifdef FNAMES_8_3 +#define HTML_SUFFIX ".htm" +#else +#define HTML_SUFFIX ".html" +#endif + +#ifndef FNAME_LYNXRC +#ifdef FNAMES_8_3 +#define FNAME_LYNXRC "lynx.rc" +#else +#define FNAME_LYNXRC ".lynxrc" +#endif /* FNAMES_8_3 */ +#endif + +#ifndef FNAME_LYNX_COOKIES +#ifdef FNAMES_8_3 +#define FNAME_LYNX_COOKIES "cookies" +#else +#define FNAME_LYNX_COOKIES ".lynx_cookies" +#endif /* FNAMES_8_3 */ +#endif + +#ifndef FNAME_LYNX_TRACE +#ifdef FNAMES_8_3 +#define FNAME_LYNX_TRACE "LY-TRACE.LOG" +#else +#define FNAME_LYNX_TRACE "Lynx.trace" +#endif /* FNAMES_8_3 */ +#endif + +#ifndef BLAT_MAIL +#define BLAT_MAIL "blat" +#endif + +#ifndef ALTBLAT_MAIL +#define ALTBLAT_MAIL "blatj" +#endif + +#define BIN_SUFFIX ".bin" +#define TEXT_SUFFIX ".txt" + +#ifdef VMS +/* +** Use the VMS port of gzip for uncompressing both .Z and .gz files. +*/ +#define UNCOMPRESS_PATH "gzip -d" +#define COPY_PATH "copy/nolog/noconf" +#define GZIP_PATH "gzip" +#define BZIP2_PATH "bzip2" +#define TELNET_PATH "telnet" +#define TN3270_PATH "tn3270" +#define RLOGIN_PATH "rlogin" + +#else + +#ifdef DOSPATH + +/* + * Define this to setup feature that uses directory of lynx.exe to locate + * associated configuration files. +#define USE_PROGRAM_DIR 1 + */ + +#ifdef _WINDOWS + +#ifndef USE_BLAT_MAILER +#define USE_BLAT_MAILER 1 +#endif + +#ifndef LYNX_CFG_PATH +#define LYNX_CFG_PATH "." +#endif + +#else +/* have to define something... */ +#undef SYSTEM_MAIL +#define SYSTEM_MAIL "sendmail" +#define SYSTEM_MAIL_FLAGS "-t -oi" +#endif /* _WINDOWS */ + +/* +** The following executables may be used at run time. Unless you change +** the definitions to include the full directories, they will be sought +** from your PATH at run-time; they should be available as "cp.exe", +** "mv.exe" and so on. To get those programs look for GNU-port stuff +** elsewhere. +** Currently, if compiled with -DUSE_ZLIB and without -DDIRED_SUPPORT +** (default), the following from the list below are required: +** MV_PATH (mv.exe) - for bookmark handling (DEL_BOOKMARK command) +** UNCOMPRESS_PATH - for automatic decompression of files in Unix +** compress format +** TELNET_PATH, TN3270_PATH, RLOGIN_PATH - for access to "telnet:", +** "tn3270:", and "rlogin:" URLs. +** If they are not defined right, the corresponding operations may fail +** in unexpected and obscure ways! +** +** WINDOWS/DOS +** =========== +*/ +#ifndef HAVE_CONFIG_H +#define COMPRESS_PATH "compress" +#define UNCOMPRESS_PATH "uncompress" +#define UUDECODE_PATH "uudecode" +#define ZCAT_PATH "zcat" +#define GZIP_PATH "gzip" +#define BZIP2_PATH "bzip2" +#define MV_PATH "mv" +#define INSTALL_PATH "install" +#define TAR_PATH "tar" +#define ZIP_PATH "zip" +#define UNZIP_PATH "unzip" +#define RM_PATH "rm" +#define TELNET_PATH "telnet" +#define TN3270_PATH "tn3270" +#define RLOGIN_PATH "rlogin" + +/* see src/LYLocal.c for these */ +#define TAR_UP_OPTIONS "-cf" +#define TAR_DOWN_OPTIONS "-xf" +#define TAR_PIPE_OPTIONS "-" +#define TAR_FILE_OPTIONS "" + +/* + * These are not used: + * #define COPY_PATH "cp" + * #define CHMOD_PATH "chmod" + * #define MKDIR_PATH "mkdir" + * #define TOUCH_PATH "touch" + */ +#endif /* HAVE_CONFIG_H */ + +#else /* Unix */ + /* Standard locations are defined via the configure script. When + * helper applications are in your home directory or other nonstandard + * locations, you probably will have to preset the path to them with + * environment variables (see INSTALLATION, Section II-1d). + */ +#endif /* DOSPATH */ +#endif /* VMS */ + +/***************************** + * I have not ported multibyte support for EBCDIC. In fact, some multibyte + * code in LYLowerCase() crashes on EBCDIC strings. -- gil + */ +#if ! defined(NOT_ASCII) +/***************************** + * SUPPORT_MULTIBYTE_EDIT provides better support of CJK characters to + * Lynx's Line Editor. JIS X0201 Kana is partially supported. The + * reason why I didn't support it fully is I think supporting it is not + * required so much and I don't have an environment to test it. - TH + */ +#define SUPPORT_MULTIBYTE_EDIT +#endif /* ! defined(NOT_ASCII) */ + +/***************************** + * SUPPORT_CHDIR provides CD command (bound to 'C' by default). It allows + * changing directory to arbitrary location (if OS allows them). If dired is + * enabled, user will be able to visit any directory and view any file allowed + * according to file permissions or ACLs. + */ +#define SUPPORT_CHDIR + +/***************************** + * MARK_HIDDEN_LINKS controls whether hidden links are shown with the title + * set by the HIDDEN_LINK_MARKER string in lynx.cfg + */ +#define MARK_HIDDEN_LINKS + +/***************************** + * USE_TH_JP_AUTO_DETECT and KANJI_CODE_OVERRIDE are the macros + * for Japanese. - TH + */ +/***************************** + * USE_TH_JP_AUTO_DETECT enables a new Japanese charset detection routine. + * With the old detection strategy, Lynx always thought a document was + * written in mixture of three kanji codes (JIS, EUC and SJIS). The new + * strategy is for Lynx to first assume the document is written in one code + * or JIS + one other kanji code (JIS, EUC, SJIS, EUC+JIS and SJIS+JIS). + * The first assumption is usually correct, but if the assumption is wrong, + * Lynx falls back to the old assumption of the three kanji codes mixed. + */ +#define USE_TH_JP_AUTO_DETECT + +/***************************** + * Uncomment the following line to enable the kanji code override routine. + * The code can be changed by pressing ^L. More precisely, this allows + * the user to override the assumption about the kanji code for the document + * which Lynx has made on the basis of a META tag and HTTP response. + */ +/*#define KANJI_CODE_OVERRIDE */ + +/************************** + * SSL_CERT_FILE contains valid SSL CA certificates. Set this to a string + * to provide a runtime default value. + */ +#define SSL_CERT_FILE NULL + +/**************************************************************** + * Section 4. Things you MUST check only if you plan to use Lynx + * in an anonymous account (allow public access to Lynx). + * This section may be skipped by those people building + * Lynx for private use only. + * + */ + +/***************************** + * Enter the name of your anonymous account if you have one + * as ANONYMOUS_USER. UNIX systems will use a cuserid + * or get_login call to determine if the current user is + * the ANONYMOUS_USER. VMS systems will use getenv("USER"). + * + * You may use the "-anonymous" option for multiple accounts, + * or for precautionary reasons in the anonymous account, as well. + * + * Specify privileges for the anonymous account below. + * + * It is very important to have this correctly defined or include + * the "-anonymous" command line option for invocation of Lynx + * in an anonymous account! If you do not you will be putting + * yourself at GREAT security risk! + */ +#define ANONYMOUS_USER "" + +/******************************* + * In the following four pairs of defines, + * INSIDE_DOMAIN means users connecting from inside your local domain, + * OUTSIDE_DOMAIN means users connecting from outside your local domain. + * + * set to FALSE if you don't want users of your anonymous + * account to be able to telnet back out + */ +#define CAN_ANONYMOUS_INSIDE_DOMAIN_TELNET TRUE +#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_TELNET FALSE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to use ftp + */ +#define CAN_ANONYMOUS_INSIDE_DOMAIN_FTP TRUE +#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_FTP FALSE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to use rlogin + */ +#define CAN_ANONYMOUS_INSIDE_DOMAIN_RLOGIN TRUE +#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_RLOGIN FALSE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to read news OR post news articles. + * These flags apply to "news", "nntp", "newspost", and "newsreply" + * URLs, but not to "snews", "snewspost", or "snewsreply" + * in case they are supported. + */ +#define CAN_ANONYMOUS_INSIDE_DOMAIN_READ_NEWS TRUE +#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_READ_NEWS FALSE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to goto random URLs. (The 'g' command) + */ +#define CAN_ANONYMOUS_GOTO TRUE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to goto particular URLs. + */ +#define CAN_ANONYMOUS_GOTO_BIBP TRUE /* BIBP maps to HTTP */ +#define CAN_ANONYMOUS_GOTO_CSO FALSE +#define CAN_ANONYMOUS_GOTO_FILE FALSE +#define CAN_ANONYMOUS_GOTO_FINGER TRUE +#define CAN_ANONYMOUS_GOTO_FTP FALSE +#define CAN_ANONYMOUS_GOTO_GOPHER FALSE +#define CAN_ANONYMOUS_GOTO_HTTP TRUE +#define CAN_ANONYMOUS_GOTO_HTTPS FALSE +#define CAN_ANONYMOUS_GOTO_LYNXCGI FALSE +#define CAN_ANONYMOUS_GOTO_LYNXEXEC FALSE +#define CAN_ANONYMOUS_GOTO_LYNXPROG FALSE +#define CAN_ANONYMOUS_GOTO_MAILTO TRUE +#define CAN_ANONYMOUS_GOTO_NEWS FALSE +#define CAN_ANONYMOUS_GOTO_NNTP FALSE +#define CAN_ANONYMOUS_GOTO_RLOGIN FALSE +#define CAN_ANONYMOUS_GOTO_SNEWS FALSE +#define CAN_ANONYMOUS_GOTO_TELNET FALSE +#define CAN_ANONYMOUS_GOTO_TN3270 FALSE +#define CAN_ANONYMOUS_GOTO_WAIS TRUE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to specify a port in 'g'oto commands + * for telnet URLs. + */ +#define CAN_ANONYMOUS_GOTO_TELNET_PORT FALSE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to jump to URLs (The 'J' command) + * via the shortcut entries in your JUMPFILE. + */ +#define CAN_ANONYMOUS_JUMP FALSE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to mail + */ +#define CAN_ANONYMOUS_MAIL TRUE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to print + */ +#define CAN_ANONYMOUS_PRINT FALSE + +/******************************* + * set to FALSE if users with anonymous restrictions should + * not be able to view configuration file (lynx.cfg) info + * via special LYNXCFG: links. (This does not control access + * to lynx.cfg as a normal file, e.g., through a "file:" URL, + * if other restrictions allow that.) + */ +#define CAN_ANONYMOUS_VIEW_LYNXCFG_INFO FALSE + +/******************************* + * set to FALSE if users with anonymous restrictions should + * not be able to view extended configuration file (lynx.cfg) + * info @@@ or perform special config info functions (reloading + * at run-time) via special LYNXCFG: links @@@. This only applies + * if the lynxcfg_info" restriction controlled by the previous + * item is not in effect and if Lynx has been compiled without + * NO_CONFIG_INFO defined (--disable-config-info wasn't used + * if Lynx was built with the autoconf configure script). + * The extended info may include details on configuration file + * names and location and links for reading the files, as well + * as information on nesting of included configuration files. + */ +#define CAN_ANONYMOUS_VIEW_LYNXCFG_EXTENDED_INFO FALSE + +/******************************* + * set to FALSE if users with anonymous restrictions should + * not be able to view information on compile time configuration + * via special LYNXCOMPILEOPTS: links. This only applies + * if the autoconf configure script was used to build Lynx + * AND --disable-config-info wasn't used, otherwise this + * special URL scheme isn't recognized anyway. + */ +#define CAN_ANONYMOUS_VIEW_COMPILEOPTS_INFO FALSE + +/******************************* + * set to FALSE if you don't want users of your anonymous + * account to be able to 'g'oto special URLs for showing + * configuration info (LYNXCFG: and LYNXCOMPILEOPTS:) if + * they are otherwise allowed. + */ +#define CAN_ANONYMOUS_GOTO_CONFIGINFO FALSE + +/***************************** + * Be sure you have read about and set defines above in Sections + * 1, 2 and 3 that could affect Lynx in an anonymous account, + * especially LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS. + * + * This ends the section specific to anonymous accounts. + */ + +/***************************** + * These can be uncommmented to get more detail when debugging changes to + * the color-style and layout logic. + */ +/*#define DEBUG_APPCH 1*/ +/*#define DEBUG_STYLE 1*/ + +#ifdef DEBUG_STYLE +#define CTRACE_STYLE(p) CTRACE2(TRACE_STYLE, p) +#else +#define CTRACE_STYLE(p) /* nothing */ +#endif + +/* #define DEBUG_SPLITLINE */ + +#ifdef DEBUG_SPLITLINE +#define CTRACE_SPLITLINE(p) CTRACE(p) +#else +#define CTRACE_SPLITLINE(p) /*nothing */ +#endif + +#endif /* USERDEFS_H */ |