Adding upstream version 1.12.0.upstream/1.12.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 911 insertions, 0 deletions

diff --git a/collectors/python.d.plugin/smartd_log/Makefile.inc b/collectors/python.d.plugin/smartd_log/Makefile.inc
new file mode 100644
index 0000000..dc1d0f3
--- /dev/null
+++ b/collectors/python.d.plugin/smartd_log/Makefile.inc
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# THIS IS NOT A COMPLETE Makefile
+# IT IS INCLUDED BY ITS PARENT'S Makefile.am
+# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
+
+# install these files
+dist_python_DATA       += smartd_log/smartd_log.chart.py
+dist_pythonconfig_DATA += smartd_log/smartd_log.conf
+
+# do not install these files, but include them in the distribution
+dist_noinst_DATA       += smartd_log/README.md smartd_log/Makefile.inc
+
diff --git a/collectors/python.d.plugin/smartd_log/README.md b/collectors/python.d.plugin/smartd_log/README.md
new file mode 100644
index 0000000..3b0816f
--- /dev/null
+++ b/collectors/python.d.plugin/smartd_log/README.md
@@ -0,0 +1,103 @@
+# smartd_log
+
+Module monitor `smartd` log files to collect HDD/SSD S.M.A.R.T attributes.
+
+**Requirements:**
+* `smartmontools`
+
+It produces following charts for SCSI devices:
+
+1. **Read Error Corrected**
+
+2. **Read Error Uncorrected**
+
+3. **Write Error Corrected**
+
+4. **Write Error Uncorrected**
+
+5. **Verify Error Corrected**
+
+6. **Verify Error Uncorrected**
+
+7. **Temperature**
+
+
+For ATA devices:
+1. **Read Error Rate**
+
+2. **Seek Error Rate**
+
+3. **Soft Read Error Rate**
+
+4. **Write Error Rate**
+
+5. **SATA Interface Downshift**
+
+6. **UDMA CRC Error Count**
+
+7. **Throughput Performance**
+
+8. **Seek Time Performance**
+
+9. **Start/Stop Count**
+
+10. **Power-On Hours Count**
+
+11. **Power Cycle Count**
+
+12. **Unexpected Power Loss**
+
+13. **Spin-Up Time**
+
+14. **Spin-up Retries**
+
+15. **Calibration Retries**
+
+16. **Temperature**
+
+17. **Reallocated Sectors Count**
+
+18. **Reserved Block Count**
+
+19. **Program Fail Count**
+
+20. **Erase Fail Count**
+
+21. **Wear Leveller Worst Case Erase Count**
+
+22. **Unused Reserved NAND Blocks**
+
+23. **Reallocation Event Count**
+
+24. **Current Pending Sector Count**
+
+25. **Offline Uncorrectable Sector Count**
+
+26. **Percent Lifetime Used**
+
+### prerequisite
+`smartd` must be running with `-A` option to write smartd attribute information to files.
+
+For this you need to set `smartd_opts` (or `SMARTD_ARGS`, check _smartd.service_ content) in `/etc/default/smartmontools`:
+
+
+```
+# dump smartd attrs info every 600 seconds
+smartd_opts="-A /var/log/smartd/ -i 600"
+```
+
+
+`smartd` appends logs at every run. It's strongly recommended to use `logrotate` for smartd files.
+
+### configuration
+
+```yaml
+local:
+  log_path : '/var/log/smartd/'
+```
+
+If no configuration is given, module will attempt to read log files in `/var/log/smartd/` directory.
+
+---
+
+[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fcollectors%2Fpython.d.plugin%2Fsmartd_log%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]()
diff --git a/collectors/python.d.plugin/smartd_log/smartd_log.chart.py b/collectors/python.d.plugin/smartd_log/smartd_log.chart.py
new file mode 100644
index 0000000..871025a
--- /dev/null
+++ b/collectors/python.d.plugin/smartd_log/smartd_log.chart.py
@@ -0,0 +1,728 @@
+# -*- coding: utf-8 -*-
+# Description: smart netdata python.d module
+# Author: l2isbad, vorph1
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+import os
+import re
+
+from copy import deepcopy
+from time import time
+
+from bases.collection import read_last_line
+from bases.FrameworkServices.SimpleService import SimpleService
+
+
+INCREMENTAL = 'incremental'
+ABSOLUTE = 'absolute'
+
+ATA = 'ata'
+SCSI = 'scsi'
+CSV = '.csv'
+
+DEF_RESCAN_INTERVAL = 60
+DEF_AGE = 30
+DEF_PATH = '/var/log/smartd'
+
+ATTR1 = '1'
+ATTR2 = '2'
+ATTR3 = '3'
+ATTR4 = '4'
+ATTR5 = '5'
+ATTR7 = '7'
+ATTR8 = '8'
+ATTR9 = '9'
+ATTR10 = '10'
+ATTR11 = '11'
+ATTR12 = '12'
+ATTR13 = '13'
+ATTR170 = '170'
+ATTR171 = '171'
+ATTR172 = '172'
+ATTR173 = '173'
+ATTR174 = '174'
+ATTR180 = '180'
+ATTR183 = '183'
+ATTR190 = '190'
+ATTR194 = '194'
+ATTR196 = '196'
+ATTR197 = '197'
+ATTR198 = '198'
+ATTR199 = '199'
+ATTR202 = '202'
+ATTR206 = '206'
+ATTR_READ_ERR_COR = 'read-total-err-corrected'
+ATTR_READ_ERR_UNC = 'read-total-unc-errors'
+ATTR_WRITE_ERR_COR = 'write-total-err-corrected'
+ATTR_WRITE_ERR_UNC = 'write-total-unc-errors'
+ATTR_VERIFY_ERR_COR = 'verify-total-err-corrected'
+ATTR_VERIFY_ERR_UNC = 'verify-total-unc-errors'
+ATTR_TEMPERATURE = 'temperature'
+
+
+RE_ATA = re.compile(
+    '(\d+);'  # attribute
+    '(\d+);'  # normalized value
+    '(\d+)',  # raw value
+    re.X
+)
+
+RE_SCSI = re.compile(
+    '([a-z-]+);'  # attribute
+    '([0-9.]+)',  # raw value
+    re.X
+)
+
+ORDER = [
+    # errors
+    'read_error_rate',
+    'seek_error_rate',
+    'soft_read_error_rate',
+    'write_error_rate',
+    'read_total_err_corrected',
+    'read_total_unc_errors',
+    'write_total_err_corrected',
+    'write_total_unc_errors',
+    'verify_total_err_corrected',
+    'verify_total_unc_errors',
+    # external failure
+    'sata_interface_downshift',
+    'udma_crc_error_count',
+    # performance
+    'throughput_performance',
+    'seek_time_performance',
+    # power
+    'start_stop_count',
+    'power_on_hours_count',
+    'power_cycle_count',
+    'unexpected_power_loss',
+    # spin
+    'spin_up_time',
+    'spin_up_retries',
+    'calibration_retries',
+    # temperature
+    'airflow_temperature_celsius',
+    'temperature_celsius',
+    # wear
+    'reallocated_sectors_count',
+    'reserved_block_count',
+    'program_fail_count',
+    'erase_fail_count',
+    'wear_leveller_worst_case_erase_count',
+    'unused_reserved_nand_blocks',
+    'reallocation_event_count',
+    'current_pending_sector_count',
+    'offline_uncorrectable_sector_count',
+    'percent_lifetime_used',
+]
+
+CHARTS = {
+    'read_error_rate': {
+        'options': [None, 'Read Error Rate', 'value', 'errors', 'smartd_log.read_error_rate', 'line'],
+        'lines': [],
+        'attrs': [ATTR1],
+        'algo': ABSOLUTE,
+    },
+    'seek_error_rate': {
+        'options': [None, 'Seek Error Rate', 'value', 'errors', 'smartd_log.seek_error_rate', 'line'],
+        'lines': [],
+        'attrs': [ATTR7],
+        'algo': ABSOLUTE,
+    },
+    'soft_read_error_rate': {
+        'options': [None, 'Soft Read Error Rate', 'errors', 'errors', 'smartd_log.soft_read_error_rate', 'line'],
+        'lines': [],
+        'attrs': [ATTR13],
+        'algo': INCREMENTAL,
+    },
+    'write_error_rate': {
+        'options': [None, 'Write Error Rate', 'value', 'errors', 'smartd_log.write_error_rate', 'line'],
+        'lines': [],
+        'attrs': [ATTR206],
+        'algo': ABSOLUTE,
+    },
+    'read_total_err_corrected': {
+        'options': [None, 'Read Error Corrected', 'errors', 'errors', 'smartd_log.read_total_err_corrected', 'line'],
+        'lines': [],
+        'attrs': [ATTR_READ_ERR_COR],
+        'algo': INCREMENTAL,
+    },
+    'read_total_unc_errors': {
+        'options': [None, 'Read Error Uncorrected', 'errors', 'errors', 'smartd_log.read_total_unc_errors', 'line'],
+        'lines': [],
+        'attrs': [ATTR_READ_ERR_UNC],
+        'algo': INCREMENTAL,
+    },
+    'write_total_err_corrected': {
+        'options': [None, 'Write Error Corrected', 'errors', 'errors', 'smartd_log.read_total_err_corrected', 'line'],
+        'lines': [],
+        'attrs': [ATTR_WRITE_ERR_COR],
+        'algo': INCREMENTAL,
+    },
+    'write_total_unc_errors': {
+        'options': [None, 'Write Error Uncorrected', 'errors', 'errors', 'smartd_log.write_total_unc_errors', 'line'],
+        'lines': [],
+        'attrs': [ATTR_WRITE_ERR_UNC],
+        'algo': INCREMENTAL,
+    },
+    'verify_total_err_corrected': {
+        'options': [None, 'Verify Error Corrected', 'errors', 'errors', 'smartd_log.verify_total_err_corrected',
+                    'line'],
+        'lines': [],
+        'attrs': [ATTR_VERIFY_ERR_COR],
+        'algo': INCREMENTAL,
+    },
+    'verify_total_unc_errors': {
+        'options': [None, 'Verify Error Uncorrected', 'errors', 'errors', 'smartd_log.verify_total_unc_errors', 'line'],
+        'lines': [],
+        'attrs': [ATTR_VERIFY_ERR_UNC],
+        'algo': INCREMENTAL,
+    },
+    'sata_interface_downshift': {
+        'options': [None, 'SATA Interface Downshift', 'events', 'external failure',
+                    'smartd_log.sata_interface_downshift', 'line'],
+        'lines': [],
+        'attrs': [ATTR183],
+        'algo': INCREMENTAL,
+    },
+    'udma_crc_error_count': {
+        'options': [None, 'UDMA CRC Error Count', 'errors', 'external failure', 'smartd_log.udma_crc_error_count',
+                    'line'],
+        'lines': [],
+        'attrs': [ATTR199],
+        'algo': INCREMENTAL,
+    },
+    'throughput_performance': {
+        'options': [None, 'Throughput Performance', 'value', 'performance', 'smartd_log.throughput_performance',
+                    'line'],
+        'lines': [],
+        'attrs': [ATTR2],
+        'algo': ABSOLUTE,
+    },
+    'seek_time_performance': {
+        'options': [None, 'Seek Time Performance', 'value', 'performance', 'smartd_log.seek_time_performance', 'line'],
+        'lines': [],
+        'attrs': [ATTR8],
+        'algo': ABSOLUTE,
+    },
+    'start_stop_count': {
+        'options': [None, 'Start/Stop Count', 'events', 'power', 'smartd_log.start_stop_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR4],
+        'algo': ABSOLUTE,
+    },
+    'power_on_hours_count': {
+        'options': [None, 'Power-On Hours Count', 'hours', 'power', 'smartd_log.power_on_hours_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR9],
+        'algo': ABSOLUTE,
+    },
+    'power_cycle_count': {
+        'options': [None, 'Power Cycle Count', 'events', 'power', 'smartd_log.power_cycle_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR12],
+        'algo': ABSOLUTE,
+    },
+    'unexpected_power_loss': {
+        'options': [None, 'Unexpected Power Loss', 'events', 'power', 'smartd_log.unexpected_power_loss', 'line'],
+        'lines': [],
+        'attrs': [ATTR174],
+        'algo': ABSOLUTE,
+    },
+    'spin_up_time': {
+        'options': [None, 'Spin-Up Time', 'ms', 'spin', 'smartd_log.spin_up_time', 'line'],
+        'lines': [],
+        'attrs': [ATTR3],
+        'algo': ABSOLUTE,
+    },
+    'spin_up_retries': {
+        'options': [None, 'Spin-up Retries', 'retries', 'spin', 'smartd_log.spin_up_retries', 'line'],
+        'lines': [],
+        'attrs': [ATTR10],
+        'algo': INCREMENTAL,
+    },
+    'calibration_retries': {
+        'options': [None, 'Calibration Retries', 'retries', 'spin', 'smartd_log.calibration_retries', 'line'],
+        'lines': [],
+        'attrs': [ATTR11],
+        'algo': INCREMENTAL,
+    },
+    'airflow_temperature_celsius': {
+        'options': [None, 'Airflow Temperature Celsius', 'celsius', 'temperature',
+                    'smartd_log.airflow_temperature_celsius', 'line'],
+        'lines': [],
+        'attrs': [ATTR190],
+        'algo': ABSOLUTE,
+    },
+    'temperature_celsius': {
+        'options': [None, 'Temperature', 'celsius', 'temperature', 'smartd_log.temperature_celsius', 'line'],
+        'lines': [],
+        'attrs': [ATTR194, ATTR_TEMPERATURE],
+        'algo': ABSOLUTE,
+    },
+    'reallocated_sectors_count': {
+        'options': [None, 'Reallocated Sectors Count', 'sectors', 'wear', 'smartd_log.reallocated_sectors_count',
+                    'line'],
+        'lines': [],
+        'attrs': [ATTR5],
+        'algo': INCREMENTAL,
+    },
+    'reserved_block_count': {
+        'options': [None, 'Reserved Block Count', 'percentage', 'wear', 'smartd_log.reserved_block_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR170],
+        'algo': ABSOLUTE,
+    },
+    'program_fail_count': {
+        'options': [None, 'Program Fail Count', 'errors', 'wear', 'smartd_log.program_fail_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR171],
+        'algo': INCREMENTAL,
+    },
+    'erase_fail_count': {
+        'options': [None, 'Erase Fail Count', 'failures', 'wear', 'smartd_log.erase_fail_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR172],
+        'algo': INCREMENTAL,
+    },
+    'wear_leveller_worst_case_erase_count': {
+        'options': [None, 'Wear Leveller Worst Case Erase Count', 'erases', 'wear',
+                    'smartd_log.wear_leveller_worst_case_erase_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR173],
+        'algo': ABSOLUTE,
+    },
+    'unused_reserved_nand_blocks': {
+        'options': [None, 'Unused Reserved NAND Blocks', 'blocks', 'wear', 'smartd_log.unused_reserved_nand_blocks',
+                    'line'],
+        'lines': [],
+        'attrs': [ATTR180],
+        'algo': ABSOLUTE,
+    },
+    'reallocation_event_count': {
+        'options': [None, 'Reallocation Event Count', 'events', 'wear', 'smartd_log.reallocation_event_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR196],
+        'algo': INCREMENTAL,
+    },
+    'current_pending_sector_count': {
+        'options': [None, 'Current Pending Sector Count', 'sectors', 'wear', 'smartd_log.current_pending_sector_count',
+                    'line'],
+        'lines': [],
+        'attrs': [ATTR197],
+        'algo': ABSOLUTE,
+    },
+    'offline_uncorrectable_sector_count': {
+        'options': [None, 'Offline Uncorrectable Sector Count', 'sectors', 'wear',
+                    'smartd_log.offline_uncorrectable_sector_count', 'line'],
+        'lines': [],
+        'attrs': [ATTR198],
+        'algo': ABSOLUTE,
+
+    },
+    'percent_lifetime_used': {
+        'options': [None, 'Percent Lifetime Used', 'percentage', 'wear', 'smartd_log.percent_lifetime_used', 'line'],
+        'lines': [],
+        'attrs': [ATTR202],
+        'algo': ABSOLUTE,
+    }
+}
+
+# NOTE: 'parse_temp' decodes ATA 194 raw value. Not heavily tested. Written by @Ferroin
+# C code:
+# https://github.com/smartmontools/smartmontools/blob/master/smartmontools/atacmds.cpp#L2051
+#
+# Calling 'parse_temp' on the raw value will return a 4-tuple, containing
+#  * temperature
+#  * minimum
+#  * maximum
+#  * over-temperature count
+# substituting None for values it can't decode.
+#
+# Example:
+# >>> parse_temp(42952491042)
+# >>> (34, 10, 43, None)
+#
+#
+# def check_temp_word(i):
+#     if i <= 0x7F:
+#         return 0x11
+#     elif i <= 0xFF:
+#         return 0x01
+#     elif 0xFF80 <= i:
+#         return 0x10
+#     return 0x00
+#
+#
+# def check_temp_range(t, b0, b1):
+#     if b0 > b1:
+#         t0, t1 = b1, b0
+#     else:
+#         t0, t1 = b0, b1
+#
+#     if all([
+#         -60 <= t0,
+#         t0 <= t,
+#         t <= t1,
+#         t1 <= 120,
+#         not (t0 == -1 and t1 <= 0)
+#     ]):
+#         return t0, t1
+#     return None, None
+#
+#
+# def parse_temp(raw):
+#     byte = list()
+#     word = list()
+#     for i in range(0, 6):
+#         byte.append(0xFF & (raw >> (i * 8)))
+#     for i in range(0, 3):
+#         word.append(0xFFFF & (raw >> (i * 16)))
+#
+#     ctwd = check_temp_word(word[0])
+#
+#     if not word[2]:
+#         if ctwd and not word[1]:
+#             # byte[0] is temp, no other data
+#             return byte[0], None, None, None
+#
+#         if ctwd and all(check_temp_range(byte[0], byte[2], byte[3])):
+#             # byte[0] is temp, byte[2] is max or min, byte[3] is min or max
+#             trange = check_temp_range(byte[0], byte[2], byte[3])
+#             return byte[0], trange[0], trange[1], None
+#
+#         if ctwd and all(check_temp_range(byte[0], byte[1], byte[2])):
+#             # byte[0] is temp, byte[1] is max or min, byte[2] is min or max
+#             trange = check_temp_range(byte[0], byte[1], byte[2])
+#             return byte[0], trange[0], trange[1], None
+#
+#         return None, None, None, None
+#
+#     if ctwd:
+#         if all(
+#                 [
+#                     ctwd & check_temp_word(word[1]) & check_temp_word(word[2]) != 0x00,
+#                     all(check_temp_range(byte[0], byte[2], byte[4])),
+#                 ]
+#         ):
+#             # byte[0] is temp, byte[2] is max or min, byte[4] is min or max
+#             trange = check_temp_range(byte[0], byte[2], byte[4])
+#             return byte[0], trange[0], trange[1], None
+#         else:
+#             trange = check_temp_range(byte[0], byte[2], byte[3])
+#             if word[2] < 0x7FFF and all(trange) and trange[1] >= 40:
+#                 # byte[0] is temp, byte[2] is max or min, byte[3] is min or max, word[2] is overtemp count
+#                 return byte[0], trange[0], trange[1], word[2]
+#     # no data
+#     return None, None, None, None
+
+
+CHARTED_ATTRS = dict((attr, k) for k, v in CHARTS.items() for attr in v['attrs'])
+
+
+class BaseAtaSmartAttribute:
+    def __init__(self, name, normalized_value, raw_value):
+        self.name = name
+        self.normalized_value = normalized_value
+        self.raw_value = raw_value
+
+    def value(self):
+        raise NotImplementedError
+
+
+class AtaRaw(BaseAtaSmartAttribute):
+    def value(self):
+        return self.raw_value
+
+
+class AtaNormalized(BaseAtaSmartAttribute):
+    def value(self):
+        return self.normalized_value
+
+
+class Ata9(BaseAtaSmartAttribute):
+    def value(self):
+        value = int(self.raw_value)
+        if value > 1e6:
+            return value & 0xFFFF
+        return value
+
+
+class Ata190(BaseAtaSmartAttribute):
+    def value(self):
+        return 100 - int(self.normalized_value)
+
+
+class Ata194(BaseAtaSmartAttribute):
+    def value(self):
+        return min(int(self.normalized_value), int(self.raw_value))
+
+
+class BaseSCSISmartAttribute:
+    def __init__(self, name, raw_value):
+        self.name = name
+        self.raw_value = raw_value
+
+    def value(self):
+        raise NotImplementedError
+
+
+class SCSIRaw(BaseSCSISmartAttribute):
+    def value(self):
+        return self.raw_value
+
+
+def ata_attribute_factory(value):
+    name = value[0]
+
+    if name == ATTR9:
+        return Ata9(*value)
+    elif name == ATTR190:
+        return Ata190(*value)
+    elif name == ATTR194:
+        return Ata194(*value)
+    elif name in [
+        ATTR1,
+        ATTR7,
+        ATTR202,
+        ATTR206,
+    ]:
+        return AtaNormalized(*value)
+
+    return AtaRaw(*value)
+
+
+def scsi_attribute_factory(value):
+    return SCSIRaw(*value)
+
+
+def attribute_factory(value):
+    name = value[0]
+    if name.isdigit():
+        return ata_attribute_factory(value)
+    return scsi_attribute_factory(value)
+
+
+def handle_error(*errors):
+    def on_method(method):
+        def on_call(*args):
+            try:
+                return method(*args)
+            except errors:
+                return None
+        return on_call
+    return on_method
+
+
+class DiskLogFile:
+    def __init__(self, full_path):
+        self.path = full_path
+        self.size = os.path.getsize(full_path)
+
+    @handle_error(OSError)
+    def is_changed(self):
+        return self.size != os.path.getsize(self.path)
+
+    @handle_error(OSError)
+    def is_active(self, current_time, limit):
+        return (current_time - os.path.getmtime(self.path)) / 60 < limit
+
+    @handle_error(OSError)
+    def read(self):
+        self.size = os.path.getsize(self.path)
+        return read_last_line(self.path)
+
+
+class BaseDisk:
+    def __init__(self, name, log_file):
+        self.name = re.sub(r'_+', '_', name)
+        self.log_file = log_file
+        self.attrs = list()
+        self.alive = True
+        self.charted = False
+
+    def __eq__(self, other):
+        if isinstance(other, BaseDisk):
+            return self.name == other.name
+        return self.name == other
+
+    def __ne__(self, other):
+        return not self == other
+
+    def __hash__(self):
+        return hash(repr(self))
+
+    def parser(self, data):
+        raise NotImplementedError
+
+    @handle_error(TypeError)
+    def populate_attrs(self):
+        self.attrs = list()
+        line = self.log_file.read()
+        for value in self.parser(line):
+            self.attrs.append(attribute_factory(value))
+
+        return len(self.attrs)
+
+    def data(self):
+        data = dict()
+        for attr in self.attrs:
+            data['{0}_{1}'.format(self.name, attr.name)] = attr.value()
+        return data
+
+
+class ATADisk(BaseDisk):
+    def parser(self, data):
+        return RE_ATA.findall(data)
+
+
+class SCSIDisk(BaseDisk):
+    def parser(self, data):
+        return RE_SCSI.findall(data)
+
+
+class Service(SimpleService):
+    def __init__(self, configuration=None, name=None):
+        SimpleService.__init__(self, configuration=configuration, name=name)
+        self.order = ORDER
+        self.definitions = deepcopy(CHARTS)
+        self.log_path = configuration.get('log_path', DEF_PATH)
+        self.age = configuration.get('age', DEF_AGE)
+        self.exclude = configuration.get('exclude_disks', str()).split()
+        self.disks = list()
+        self.runs = 0
+
+    def check(self):
+        return self.scan() > 0
+
+    def get_data(self):
+        self.runs += 1
+
+        if self.runs % DEF_RESCAN_INTERVAL == 0:
+            self.cleanup()
+            self.scan()
+
+        data = dict()
+
+        for disk in self.disks:
+            if not disk.alive:
+                continue
+
+            if not disk.charted:
+                self.add_disk_to_charts(disk)
+
+            changed = disk.log_file.is_changed()
+
+            if changed is None:
+                disk.alive = False
+                continue
+
+            if changed and disk.populate_attrs() is None:
+                disk.alive = False
+                continue
+
+            data.update(disk.data())
+
+        return data
+
+    def cleanup(self):
+        current_time = time()
+        for disk in self.disks[:]:
+            if any(
+                [
+                    not disk.alive,
+                    not disk.log_file.is_active(current_time, self.age),
+                ]
+            ):
+                self.disks.remove(disk.name)
+                self.remove_disk_from_charts(disk)
+
+    def scan(self):
+        self.debug('scanning {0}'.format(self.log_path))
+        current_time = time()
+
+        for full_name in os.listdir(self.log_path):
+            disk = self.create_disk_from_file(full_name, current_time)
+            if not disk:
+                continue
+            self.disks.append(disk)
+
+        return len(self.disks)
+
+    def create_disk_from_file(self, full_name,  current_time):
+        if not full_name.endswith(CSV):
+            self.debug('skipping {0}: not a csv file'.format(full_name))
+            return None
+
+        name = os.path.basename(full_name).split('.')[-3]
+        path = os.path.join(self.log_path, full_name)
+
+        if name in self.disks:
+            return None
+
+        if [p for p in self.exclude if p in name]:
+            return None
+
+        if not os.access(path, os.R_OK):
+            self.debug('skipping {0}: not readable'.format(full_name))
+            return None
+
+        if os.path.getsize(path) == 0:
+            self.debug('skipping {0}: zero size'.format(full_name))
+            return None
+
+        if (current_time - os.path.getmtime(path)) / 60 > self.age:
+            self.debug('skipping {0}: haven\'t been updated for last {1} minutes'.format(full_name, self.age))
+            return None
+
+        if ATA in full_name:
+            disk = ATADisk(name, DiskLogFile(path))
+        elif SCSI in full_name:
+            disk = SCSIDisk(name, DiskLogFile(path))
+        else:
+            self.debug('skipping {0}: unknown type'.format(full_name))
+            return None
+
+        disk.populate_attrs()
+        if not disk.attrs:
+            self.error('skipping {0}: parsing failed'.format(full_name))
+            return None
+
+        self.debug('added {0}'.format(full_name))
+        return disk
+
+    def add_disk_to_charts(self, disk):
+        if len(self.charts) == 0 or disk.charted:
+            return
+        disk.charted = True
+
+        for attr in disk.attrs:
+            chart_id = CHARTED_ATTRS.get(attr.name)
+
+            if not chart_id or chart_id not in self.charts:
+                continue
+
+            chart = self.charts[chart_id]
+            dim = [
+                '{0}_{1}'.format(disk.name, attr.name),
+                disk.name,
+                CHARTS[chart_id]['algo'],
+            ]
+
+            if dim[0] in self.charts[chart_id].dimensions:
+                chart.hide_dimension(dim[0], reverse=True)
+            else:
+                chart.add_dimension(dim)
+
+    def remove_disk_from_charts(self, disk):
+        if len(self.charts) == 0 or not disk.charted:
+            return
+
+        for attr in disk.attrs:
+            chart_id = CHARTED_ATTRS.get(attr.name)
+
+            if not chart_id or chart_id not in self.charts:
+                continue
+
+            # TODO: can't delete dimension
+            self.charts[chart_id].hide_dimension('{0}_{1}'.format(disk.name, attr.name))
diff --git a/collectors/python.d.plugin/smartd_log/smartd_log.conf b/collectors/python.d.plugin/smartd_log/smartd_log.conf
new file mode 100644
index 0000000..4f138d1
--- /dev/null
+++ b/collectors/python.d.plugin/smartd_log/smartd_log.conf
@@ -0,0 +1,67 @@
+# netdata python.d.plugin configuration for smartd log
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# penalty indicates whether to apply penalty to update_every in case of failures.
+# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes.
+# penalty: yes
+
+# autodetection_retry sets the job re-check interval in seconds.
+# The job is not deleted if check fails.
+# Attempts to start the job are made once every autodetection_retry.
+# This feature is disabled by default.
+# autodetection_retry: 0
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname            # the JOB's name as it will appear at the
+#                             # dashboard (by default is the job_name)
+#                             # JOBs sharing a name are mutually exclusive
+#     update_every: 1         # the JOB's data collection frequency
+#     priority: 60000         # the JOB's order on the dashboard
+#     penalty: yes            # the JOB's penalty
+#     autodetection_retry: 0  # the JOB's re-check interval in seconds
+#
+# Additionally to the above, smartd_log also supports the following:
+#
+#    log_path: '/path/to/smartd_logs'    # path to smartd log files. Default is /var/log/smartd
+#    exclude_disks: 'PATTERN1 PATTERN2'  # space separated patterns. If the pattern is in the drive name, the module will not collect data for it.
+#
+# ----------------------------------------------------------------------