Adding upstream version 1.12.0.upstream/1.12.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 252 insertions, 0 deletions

diff --git a/packaging/installer/kickstart-static64.sh b/packaging/installer/kickstart-static64.sh
new file mode 100755
index 0000000..cd13c41
--- /dev/null
+++ b/packaging/installer/kickstart-static64.sh
@@ -0,0 +1,252 @@
+#!/usr/bin/env sh
+# SPDX-License-Identifier: GPL-3.0-or-later
+# shellcheck disable=SC1117,SC2016,SC2034,SC2039,SC2059,SC2086,SC2119,SC2120,SC2129,SC2162,SC2166,SC2181
+
+umask 022
+
+# make sure UID is set
+# shellcheck disable=SC2155
+[ -z "${UID}" ] && export UID="$(id -u)"
+
+# ---------------------------------------------------------------------------------------------------------------------
+# library functions copied from packaging/installer/functions.sh
+
+which_cmd() {
+    # shellcheck disable=SC2230
+    which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null
+}
+
+check_cmd() {
+    which_cmd "${1}" >/dev/null 2>&1 && return 0
+    return 1
+}
+
+setup_terminal() {
+    TPUT_RESET=""
+    TPUT_BLACK=""
+    TPUT_RED=""
+    TPUT_GREEN=""
+    TPUT_YELLOW=""
+    TPUT_BLUE=""
+    TPUT_PURPLE=""
+    TPUT_CYAN=""
+    TPUT_WHITE=""
+    TPUT_BGBLACK=""
+    TPUT_BGRED=""
+    TPUT_BGGREEN=""
+    TPUT_BGYELLOW=""
+    TPUT_BGBLUE=""
+    TPUT_BGPURPLE=""
+    TPUT_BGCYAN=""
+    TPUT_BGWHITE=""
+    TPUT_BOLD=""
+    TPUT_DIM=""
+    TPUT_UNDERLINED=""
+    TPUT_BLINK=""
+    TPUT_INVERTED=""
+    TPUT_STANDOUT=""
+    TPUT_BELL=""
+    TPUT_CLEAR=""
+
+    # Is stderr on the terminal? If not, then fail
+    test -t 2 || return 1
+
+    if check_cmd tput
+    then
+        if [ $(( $(tput colors 2>/dev/null) )) -ge 8 ]
+        then
+            # Enable colors
+            TPUT_RESET="$(tput sgr 0)"
+            TPUT_BLACK="$(tput setaf 0)"
+            TPUT_RED="$(tput setaf 1)"
+            TPUT_GREEN="$(tput setaf 2)"
+            TPUT_YELLOW="$(tput setaf 3)"
+            TPUT_BLUE="$(tput setaf 4)"
+            TPUT_PURPLE="$(tput setaf 5)"
+            TPUT_CYAN="$(tput setaf 6)"
+            TPUT_WHITE="$(tput setaf 7)"
+            TPUT_BGBLACK="$(tput setab 0)"
+            TPUT_BGRED="$(tput setab 1)"
+            TPUT_BGGREEN="$(tput setab 2)"
+            TPUT_BGYELLOW="$(tput setab 3)"
+            TPUT_BGBLUE="$(tput setab 4)"
+            TPUT_BGPURPLE="$(tput setab 5)"
+            TPUT_BGCYAN="$(tput setab 6)"
+            TPUT_BGWHITE="$(tput setab 7)"
+            TPUT_BOLD="$(tput bold)"
+            TPUT_DIM="$(tput dim)"
+            TPUT_UNDERLINED="$(tput smul)"
+            TPUT_BLINK="$(tput blink)"
+            TPUT_INVERTED="$(tput rev)"
+            TPUT_STANDOUT="$(tput smso)"
+            TPUT_BELL="$(tput bel)"
+            TPUT_CLEAR="$(tput clear)"
+        fi
+    fi
+
+    return 0
+}
+setup_terminal || echo >/dev/null
+
+progress() {
+    echo >&2 " --- ${TPUT_DIM}${TPUT_BOLD}${*}${TPUT_RESET} --- "
+}
+
+run_ok() {
+    printf >&2 "${TPUT_BGGREEN}${TPUT_WHITE}${TPUT_BOLD} OK ${TPUT_RESET} ${*} \n\n"
+}
+
+run_failed() {
+    printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} FAILED ${TPUT_RESET} ${*} \n\n"
+}
+
+ESCAPED_PRINT_METHOD=
+printf "%q " test >/dev/null 2>&1
+[ $? -eq 0 ] && ESCAPED_PRINT_METHOD="printfq"
+escaped_print() {
+    if [ "${ESCAPED_PRINT_METHOD}" = "printfq" ]
+    then
+        printf "%q " "${@}"
+    else
+        printf "%s" "${*}"
+    fi
+    return 0
+}
+
+run_logfile="/dev/null"
+run() {
+    local user="${USER--}" dir="${PWD}" info info_console
+
+    if [ "${UID}" = "0" ]
+        then
+        info="[root ${dir}]# "
+        info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]# "
+    else
+        info="[${user} ${dir}]$ "
+        info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]$ "
+    fi
+
+    printf >> "${run_logfile}" "${info}"
+    escaped_print >> "${run_logfile}" "${@}"
+    printf >> "${run_logfile}" " ... "
+
+    printf >&2 "${info_console}${TPUT_BOLD}${TPUT_YELLOW}"
+    escaped_print >&2 "${@}"
+    printf >&2 "${TPUT_RESET}\n"
+
+    "${@}"
+
+    local ret=$?
+    if [ ${ret} -ne 0 ]
+        then
+        run_failed
+        printf >> "${run_logfile}" "FAILED with exit code ${ret}\n"
+    else
+        run_ok
+        printf >> "${run_logfile}" "OK\n"
+    fi
+
+    return ${ret}
+}
+
+
+# ---------------------------------------------------------------------------------------------------------------------
+
+fatal() {
+    printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} ABORTED ${TPUT_RESET} ${*} \n\n"
+    exit 1
+}
+
+# ---------------------------------------------------------------------------------------------------------------------
+
+if [ "$(uname -m)" != "x86_64" ]
+	then
+	fatal "Static binary versions of netdata are available only for 64bit Intel/AMD CPUs (x86_64), but yours is: $(uname -m)."
+fi
+
+if [ "$(uname -s)" != "Linux" ]
+	then
+	fatal "Static binary versions of netdata are available only for Linux, but this system is $(uname -s)"
+fi
+
+curl="$(which_cmd curl)"
+wget="$(which_cmd wget)"
+
+# ---------------------------------------------------------------------------------------------------------------------
+
+progress "Checking the latest version of static build..."
+
+BASE='https://raw.githubusercontent.com/netdata/binary-packages/master'
+
+LATEST=
+if [ ! -z "${curl}" -a -x "${curl}" ]
+then
+    LATEST="$(run ${curl} "${BASE}/netdata-latest.gz.run")"
+elif [ ! -z "${wget}" -a -x "${wget}" ]
+then
+    LATEST="$(run ${wget} -O - "${BASE}/netdata-latest.gz.run")"
+else
+    fatal "curl or wget are needed for this script to work."
+fi
+
+if [ -z "${LATEST}" ]
+	then
+	fatal "Cannot find the latest static binary version of netdata."
+fi
+
+# ---------------------------------------------------------------------------------------------------------------------
+
+progress "Downloading static netdata binary: ${LATEST}"
+
+ret=1
+if [ ! -z "${curl}" -a -x "${curl}" ]
+then
+    run ${curl} "${BASE}/${LATEST}" >"/tmp/${LATEST}"
+    ret=$?
+elif [ ! -z "${wget}" -a -x "${wget}" ]
+then
+    run ${wget} -O "/tmp/${LATEST}" "${BASE}/${LATEST}"
+    ret=$?
+else
+    fatal "curl or wget are needed for this script to work."
+fi
+
+if [ ${ret} -ne 0 -o ! -s "/tmp/${LATEST}" ]
+	then
+	fatal "Failed to download the latest static binary version of netdata."
+fi
+
+# ---------------------------------------------------------------------------------------------------------------------
+
+opts=
+inner_opts=
+while [ ! -z "${1}" ]
+do
+    if [ "${1}" = "--dont-wait" -o "${1}" = "--non-interactive" -o "${1}" = "--accept" ]
+    then
+        opts="${opts} --accept"
+    elif [ "${1}" = "--dont-start-it" ]
+    then
+        inner_opts="${inner_opts} ${1}"
+    else
+        echo >&2 "Unknown option '${1}'"
+        exit 1
+    fi
+    shift
+done
+[ ! -z "${inner_opts}" ] && inner_opts="-- ${inner_opts}"
+
+# ---------------------------------------------------------------------------------------------------------------------
+
+progress "Installing netdata"
+
+sudo=
+[ "${UID}" != "0" ] && sudo="sudo"
+run ${sudo} sh "/tmp/${LATEST}" ${opts} ${inner_opts}
+
+if [ $? -eq 0 ]
+	then
+	rm "/tmp/${LATEST}"
+else
+	echo >&2 "NOTE: did not remove: /tmp/${LATEST}"
+fi