diff options
Diffstat (limited to 'collectors/charts.d.plugin/ap/ap.chart.sh')
| -rw-r--r-- | collectors/charts.d.plugin/ap/ap.chart.sh | 179 |
1 files changed, 179 insertions, 0 deletions
diff --git a/collectors/charts.d.plugin/ap/ap.chart.sh b/collectors/charts.d.plugin/ap/ap.chart.sh new file mode 100644 index 0000000..a2d04c0 --- /dev/null +++ b/collectors/charts.d.plugin/ap/ap.chart.sh @@ -0,0 +1,179 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +ap_update_every= +ap_priority=6900 + +declare -A ap_devs=() + +# _check is called once, to find out if this chart should be enabled or not +ap_check() { + require_cmd iw || return 1 + local ev + ev=$(run iw dev | awk ' + BEGIN { + i = ""; + ssid = ""; + ap = 0; + } + /^[ \t]+Interface / { + if( ap == 1 ) { + print "ap_devs[" i "]=\"" ssid "\"" + } + + i = $2; + ssid = ""; + ap = 0; + } + /^[ \t]+ssid / { ssid = $2; } + /^[ \t]+type AP$/ { ap = 1; } + END { + if( ap == 1 ) { + print "ap_devs[" i "]=\"" ssid "\"" + } + } + ') + eval "${ev}" + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + [ ${#ap_devs[@]} -gt 0 ] && return 0 + error "no devices found in AP mode, with 'iw dev'" + return 1 +} + +# _create is called once, to create the charts +ap_create() { + local ssid dev + + for dev in "${!ap_devs[@]}"; do + ssid="${ap_devs[${dev}]}" + + # create the chart with 3 dimensions + cat <<EOF +CHART ap_clients.${dev} '' "Connected clients to ${ssid} on ${dev}" "clients" ${dev} ap.clients line $((ap_priority + 1)) $ap_update_every +DIMENSION clients '' absolute 1 1 + +CHART ap_bandwidth.${dev} '' "Bandwidth for ${ssid} on ${dev}" "kilobits/s" ${dev} ap.net area $((ap_priority + 2)) $ap_update_every +DIMENSION received '' incremental 8 1024 +DIMENSION sent '' incremental -8 1024 + +CHART ap_packets.${dev} '' "Packets for ${ssid} on ${dev}" "packets/s" ${dev} ap.packets line $((ap_priority + 3)) $ap_update_every +DIMENSION received '' incremental 1 1 +DIMENSION sent '' incremental -1 1 + +CHART ap_issues.${dev} '' "Transmit Issues for ${ssid} on ${dev}" "issues/s" ${dev} ap.issues line $((ap_priority + 4)) $ap_update_every +DIMENSION retries 'tx retries' incremental 1 1 +DIMENSION failures 'tx failures' incremental -1 1 + +CHART ap_signal.${dev} '' "Average Signal for ${ssid} on ${dev}" "dBm" ${dev} ap.signal line $((ap_priority + 5)) $ap_update_every +DIMENSION signal 'average signal' absolute 1 1000 + +CHART ap_bitrate.${dev} '' "Bitrate for ${ssid} on ${dev}" "Mbps" ${dev} ap.bitrate line $((ap_priority + 6)) $ap_update_every +DIMENSION receive '' absolute 1 1000 +DIMENSION transmit '' absolute -1 1000 +DIMENSION expected 'expected throughput' absolute 1 1000 +EOF + done + + return 0 +} + +# _update is called continuously, to collect the values +ap_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + for dev in "${!ap_devs[@]}"; do + echo + echo "DEVICE ${dev}" + iw "${dev}" station dump + done | awk ' + function zero_data() { + dev = ""; + c = 0; + rb = 0; + tb = 0; + rp = 0; + tp = 0; + tr = 0; + tf = 0; + tt = 0; + rt = 0; + s = 0; + g = 0; + e = 0; + } + function print_device() { + if(dev != "" && length(dev) > 0) { + print "BEGIN ap_clients." dev; + print "SET clients = " c; + print "END"; + print "BEGIN ap_bandwidth." dev; + print "SET received = " rb; + print "SET sent = " tb; + print "END"; + print "BEGIN ap_packets." dev; + print "SET received = " rp; + print "SET sent = " tp; + print "END"; + print "BEGIN ap_issues." dev; + print "SET retries = " tr; + print "SET failures = " tf; + print "END"; + + if( c == 0 ) c = 1; + print "BEGIN ap_signal." dev; + print "SET signal = " int(s / c); + print "END"; + print "BEGIN ap_bitrate." dev; + print "SET receive = " int(rt / c); + print "SET transmit = " int(tt / c); + print "SET expected = " int(e / c); + print "END"; + } + zero_data(); + } + BEGIN { + zero_data(); + } + /^DEVICE / { + print_device(); + dev = $2; + } + /^Station/ { c++; } + /^[ \t]+rx bytes:/ { rb += $3; } + /^[ \t]+tx bytes:/ { tb += $3; } + /^[ \t]+rx packets:/ { rp += $3; } + /^[ \t]+tx packets:/ { tp += $3; } + /^[ \t]+tx retries:/ { tr += $3; } + /^[ \t]+tx failed:/ { tf += $3; } + /^[ \t]+signal:/ { x = $2; s += x * 1000; } + /^[ \t]+rx bitrate:/ { x = $3; rt += x * 1000; } + /^[ \t]+tx bitrate:/ { x = $3; tt += x * 1000; } + /^[ \t]+expected throughput:(.*)Mbps/ { + x=$3; + sub(/Mbps/, "", x); + e += x * 1000; + } + END { + print_device(); + } + ' + + return 0 +} |