diff options
Diffstat (limited to '')
-rw-r--r-- | packaging/installer/.keep | 0 | ||||
-rw-r--r-- | packaging/installer/README.md | 413 | ||||
-rw-r--r-- | packaging/installer/UNINSTALL.md | 22 | ||||
-rw-r--r-- | packaging/installer/UPDATE.md | 55 | ||||
-rw-r--r-- | packaging/installer/functions.sh | 797 | ||||
-rwxr-xr-x | packaging/installer/kickstart-static64.sh | 252 | ||||
-rwxr-xr-x | packaging/installer/kickstart.sh | 272 | ||||
-rwxr-xr-x | packaging/installer/netdata-uninstaller.sh | 169 | ||||
-rw-r--r-- | packaging/installer/netdata-updater.sh | 115 |
9 files changed, 2095 insertions, 0 deletions
diff --git a/packaging/installer/.keep b/packaging/installer/.keep new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/packaging/installer/.keep diff --git a/packaging/installer/README.md b/packaging/installer/README.md new file mode 100644 index 0000000..eb507a5 --- /dev/null +++ b/packaging/installer/README.md @@ -0,0 +1,413 @@ +# Installation + +Netdata is a **monitoring agent**. It is designed to be installed and run on all your systems: **physical** and **virtual** servers, **containers**, even **IoT**. + +The best way to install Netdata is directly from source. Our **automatic installer** will install any required system packages and compile Netdata directly on your systems. + +!!! warning + You can find Netdata packages distributed by third parties. In many cases, these packages are either too old or broken. So, the suggested ways to install Netdata are the ones in this page. + **We are currently working to provide our binary packages for all Linux distros.** Stay tuned... + +1. [Automatic one line installation](#one-line-installation), easy installation from source, **this is the default** +2. [Install pre-built static binary on any 64bit Linux](#linux-64bit-pre-built-static-binary) +3. [Run Netdata in a docker container](#run-netdata-in-a-docker-container) +4. [Manual installation, step by step](#install-netdata-on-linux-manually) +5. [Install on FreeBSD](#freebsd) +6. [Install on pfSense](#pfsense) +7. [Enable on FreeNAS Corral](#freenas) +8. [Install on macOS (OS X)](#macos) + +See also the list of Netdata [package maintainers](../maintainers) for ASUSTOR NAS, OpenWRT, ReadyNAS, etc. + +--- + +## One line installation + +> This method is **fully automatic on all Linux** distributions. FreeBSD and MacOS systems need some preparations before installing Netdata for the first time. Check the [FreeBSD](#freebsd) and the [MacOS](#macos) sections for more information. + +To install Netdata from source and keep it up to date automatically, run the following: + +```bash +bash <(curl -Ss https://my-netdata.io/kickstart.sh) +``` + +*(do not `sudo` this command, it will do it by itself as needed)* + +![](https://registry.my-netdata.io/api/v1/badge.svg?chart=web_log_nginx.requests_per_url&options=unaligned&dimensions=kickstart&group=sum&after=-3600&label=last+hour&units=installations&value_color=orange&precision=0) ![](https://registry.my-netdata.io/api/v1/badge.svg?chart=web_log_nginx.requests_per_url&options=unaligned&dimensions=kickstart&group=sum&after=-86400&label=today&units=installations&precision=0) + +<details markdown="1"><summary>Click here for more information and advanced use of this command.</summary> + + <br/> +Verify the integrity of the script with this: + +```bash +[ "b4632ca6c651de0f667e6d4f6e1015fe" = "$(curl -Ss https://my-netdata.io/kickstart.sh | md5sum | cut -d ' ' -f 1)" ] && echo "OK, VALID" || echo "FAILED, INVALID" +``` +*It should print `OK, VALID` if the script is the one we ship.* + +The `kickstart.sh` script: + +- detects the Linux distro and **installs the required system packages** for building Netdata (will ask for confirmation) +- downloads the latest Netdata source tree to `/usr/src/netdata.git`. +- installs Netdata by running `./netdata-installer.sh` from the source tree. +- installs `netdata-updater.sh` to `cron.daily`, so your Netdata installation will be updated daily (you will get a message from cron only if the update fails). +- For QA purposes, this installation method lets us know if it succeed or failed. + +The `kickstart.sh` script passes all its parameters to `netdata-installer.sh`, so you can add more parameters to change the installation directory, enable/disable plugins, etc (check below). + +For automated installs, append a space + `--dont-wait` to the command line. You can also append `--dont-start-it` to prevent the installer from starting Netdata. Example: + +```bash + bash <(curl -Ss https://my-netdata.io/kickstart.sh) --dont-wait --dont-start-it +``` + +If you don't want to receive automatic updates, add `--no-updates` when executing `kickstart.sh` script. + +</details> <br/> + +Once Netdata is installed, see [Getting Started](../../docs/GettingStarted.md). + +--- + +## Linux 64bit pre-built static binary + +You can install a pre-compiled static binary of Netdata on any Intel/AMD 64bit Linux system +(even those that don't have a package manager, like CoreOS, CirrOS, busybox systems, etc). +You can also use these packages on systems with broken or unsupported package managers. + +To install Netdata with a binary package on any Linux distro, any kernel version - for **Intel/AMD 64bit** hosts, run the following: + +```bash + + bash <(curl -Ss https://my-netdata.io/kickstart-static64.sh) + +``` + +*(do not `sudo` this command, it will do it by itself as needed; if the target system does not have `bash` installed, see below for instructions to run it without `bash`)* + +![](https://registry.my-netdata.io/api/v1/badge.svg?chart=web_log_nginx.requests_per_url&options=unaligned&dimensions=kickstart64&group=sum&after=-3600&label=last+hour&units=installations&value_color=orange&precision=0) ![](https://registry.my-netdata.io/api/v1/badge.svg?chart=web_log_nginx.requests_per_url&options=unaligned&dimensions=kickstart64&group=sum&after=-86400&label=today&units=installations&precision=0) + +> The static builds install Netdata at **`/opt/netdata`** + +<details markdown="1"><summary>Click here for more information and advanced use of this command.</summary> + + <br/> +Verify the integrity of the script with this: + +```bash +[ "ac8e5cf25399b08c42d37e1a53e1a6d3" = "$(curl -Ss https://my-netdata.io/kickstart-static64.sh | md5sum | cut -d ' ' -f 1)" ] && echo "OK, VALID" || echo "FAILED, INVALID" +``` + +*It should print `OK, VALID` if the script is the one we ship.* + +For automated installs, append a space + `--dont-wait` to the command line. You can also append `--dont-start-it` to prevent the installer from starting Netdata. + +Example: + +```bash + + bash <(curl -Ss https://my-netdata.io/kickstart-static64.sh) --dont-wait --dont-start-it + +``` + +If your shell fails to handle the above one liner, do this: + +```bash +# download the script with curl +curl https://my-netdata.io/kickstart-static64.sh >/tmp/kickstart-static64.sh + +# or, download the script with wget +wget -O /tmp/kickstart-static64.sh https://my-netdata.io/kickstart-static64.sh + +# run the downloaded script (any sh is fine, no need for bash) +sh /tmp/kickstart-static64.sh +``` + +- The static binary files are kept in repo [binary-packages](https://github.com/netdata/binary-packages). You can download any of the `.run` files, and run it. These files are self-extracting shell scripts built with [makeself](https://github.com/megastep/makeself). +- The target system does **not** need to have bash installed. +- The same files can be used for updates too. +- For QA purposes, this installation method lets us know if it succeed or failed. + +</details> <br/> + +Once Netdata is installed, see [Getting Started](../../docs/GettingStarted.md). + +--- + +## Run Netdata in a Docker container + +You can [Install Netdata with Docker](../docker/#install-netdata-with-docker). + +--- + +## Install Netdata on Linux manually + +To install the latest git version of Netdata, please follow these 2 steps: + +1. [Prepare your system](#prepare-your-system) + + Install the required packages on your system. + +2. [Install Netdata](#install-netdata) + + Download and install Netdata. You can also update it the same way. + +--- + +### Prepare your system + +Try our experimental automatic requirements installer (no need to be root). This will try to find the packages that should be installed on your system to build and run Netdata. It supports most major Linux distributions released after 2010: + +- **Alpine** Linux and its derivatives (you have to install `bash` yourself, before using the installer) +- **Arch** Linux and its derivatives +- **Gentoo** Linux and its derivatives +- **Debian** Linux and its derivatives (including **Ubuntu**, **Mint**) +- **Fedora** and its derivatives (including **Red Hat Enterprise Linux**, **CentOS**, **Amazon Machine Image**) +- **SuSe** Linux and its derivatives (including **openSuSe**) +- **SLE12** Must have your system registered with Suse Customer Center or have the DVD. See [#1162](https://github.com/netdata/netdata/issues/1162) + +Install the packages for having a **basic Netdata installation** (system monitoring and many applications, without `mysql` / `mariadb`, `postgres`, `named`, hardware sensors and `SNMP`): + +```sh +curl -Ss 'https://raw.githubusercontent.com/netdata/netdata-demo-site/master/install-required-packages.sh' >/tmp/kickstart.sh && bash /tmp/kickstart.sh -i netdata +``` + +Install all the required packages for **monitoring everything Netdata can monitor**: + +```sh +curl -Ss 'https://raw.githubusercontent.com/netdata/netdata-demo-site/master/install-required-packages.sh' >/tmp/kickstart.sh && bash /tmp/kickstart.sh -i netdata-all +``` + +If the above do not work for you, please [open a github issue](https://github.com/netdata/netdata/issues/new?title=packages%20installer%20failed&labels=installation%20help&body=The%20experimental%20packages%20installer%20failed.%0A%0AThis%20is%20what%20it%20says:%0A%0A%60%60%60txt%0A%0Aplease%20paste%20your%20screen%20here%0A%0A%60%60%60) with a copy of the message you get on screen. We are trying to make it work everywhere (this is also why the script [reports back](https://github.com/netdata/netdata/issues/2054) success or failure for all its runs). + +--- + +This is how to do it by hand: + +```sh +# Debian / Ubuntu +apt-get install zlib1g-dev uuid-dev libmnl-dev gcc make git autoconf autoconf-archive autogen automake pkg-config curl + +# Fedora +dnf install zlib-devel libuuid-devel libmnl-devel gcc make git autoconf autoconf-archive autogen automake pkgconfig curl findutils + +# CentOS / Red Hat Enterprise Linux +yum install autoconf automake curl gcc git libmnl-devel libuuid-devel lm_sensors make MySQL-python nc pkgconfig python python-psycopg2 PyYAML zlib-devel + +``` + +Please note that for RHEL/CentOS you might need [EPEL](http://www.tecmint.com/how-to-enable-epel-repository-for-rhel-centos-6-5/). + +Once Netdata is compiled, to run it the following packages are required (already installed using the above commands): + +package|description +:-----:|----------- +`libuuid`|part of `util-linux` for GUIDs management +`zlib`|gzip compression for the internal Netdata web server + +*Netdata will fail to start without the above.* + +Netdata plugins and various aspects of Netdata can be enabled or benefit when these are installed (they are optional): + +package|description +:-----:|----------- +`bash`|for shell plugins and **alarm notifications** +`curl`|for shell plugins and **alarm notifications** +`iproute` or `iproute2`|for monitoring **Linux traffic QoS**<br/>use `iproute2` if `iproute` reports as not available or obsolete +`python`|for most of the external plugins +`python-yaml`|used for monitoring **beanstalkd** +`python-beanstalkc`|used for monitoring **beanstalkd** +`python-dnspython`|used for monitoring DNS query time +`python-ipaddress`|used for monitoring **DHCPd**<br/>this package is required only if the system has python v2. python v3 has this functionality embedded +`python-mysqldb`<br/>or<br/>`python-pymysql`|used for monitoring **mysql** or **mariadb** databases<br/>`python-mysqldb` is a lot faster and thus preferred +`python-psycopg2`|used for monitoring **postgresql** databases +`python-pymongo`|used for monitoring **mongodb** databases +`nodejs`|used for `node.js` plugins for monitoring **named** and **SNMP** devices +`lm-sensors`|for monitoring **hardware sensors** +`libmnl`|for collecting netfilter metrics +`netcat`|for shell plugins to collect metrics from remote systems + +*Netdata will greatly benefit if you have the above packages installed, but it will still work without them.* + +--- + +### Install Netdata + +Do this to install and run Netdata: + +```sh + +# download it - the directory 'netdata' will be created +git clone https://github.com/netdata/netdata.git --depth=100 +cd netdata + +# run script with root privileges to build, install, start Netdata +./netdata-installer.sh + +``` + +* If you don't want to run it straight-away, add `--dont-start-it` option. + +* If you don't want to install it on the default directories, you can run the installer like this: `./netdata-installer.sh --install /opt`. This one will install Netdata in `/opt/netdata`. + +Once the installer completes, the file `/etc/netdata/netdata.conf` will be created (if you changed the installation directory, the configuration will appear in that directory too). + +You can edit this file to set options. One common option to tweak is `history`, which controls the size of the memory database Netdata will use. By default is `3600` seconds (an hour of data at the charts) which makes Netdata use about 10-15MB of RAM (depending on the number of charts detected on your system). Check **[[Memory Requirements]]**. + +To apply the changes you made, you have to restart Netdata. + +--- + +## Other Systems + + + +##### FreeBSD + +You can install Netdata from ports or packages collection. + +This is how to install the latest Netdata version from sources on FreeBSD: + +```sh +# install required packages +pkg install bash e2fsprogs-libuuid git curl autoconf automake pkgconf pidof + +# download Netdata +git clone https://github.com/netdata/netdata.git --depth=100 + +# install Netdata in /opt/netdata +cd netdata +./netdata-installer.sh --install /opt +``` + +##### pfSense +To install Netdata on pfSense run the following commands (within a shell or under Diagnostics/Command Prompt within the pfSense web interface). + +Change platform (i386/amd64, etc) and FreeBSD versions (10/11, etc) according to your environment and change Netdata version (1.10.0 in example) according to latest version present within the FreeSBD repository:- + +Note first three packages are downloaded from the pfSense repository for maintaining compatibility with pfSense, Netdata is downloaded from the FreeBSD repository. +``` +pkg install pkgconf +pkg install bash +pkg install e2fsprogs-libuuid +pkg add http://pkg.freebsd.org/FreeBSD:11:amd64/latest/All/netdata-1.11.0.txz +``` +To start Netdata manually run `service netdata onestart` + +To start Netdata automatically at each boot add `service netdata start` as a Shellcmd within the pfSense web interface (under **Services/Shellcmd**, which you need to install beforehand under **System/Package Manager/Available Packages**). +Shellcmd Type should be set to `Shellcmd`. +![](https://user-images.githubusercontent.com/36808164/36930790-4db3aa84-1f0d-11e8-8752-cdc08bb7207c.png) +Alternatively more information can be found in https://doc.pfsense.org/index.php/Installing_FreeBSD_Packages, for achieving the same via the command line and scripts. + +If you experience an issue with `/usr/bin/install` absense on pfSense 2.3 or earlier, update pfSense or use workaround from [https://redmine.pfsense.org/issues/6643](https://redmine.pfsense.org/issues/6643) + +##### FreeNAS +On FreeNAS-Corral-RELEASE (>=10.0.3), Netdata is pre-installed. + +To use Netdata, the service will need to be enabled and started from the FreeNAS **[CLI](https://github.com/freenas/cli)**. + +To enable the Netdata service: +``` +service netdata config set enable=true +``` + +To start the netdata service: +``` +service netdata start +``` + +##### macOS + +Netdata on macOS still has limited charts, but external plugins do work. + +You can either install Netdata with [Homebrew](https://brew.sh/) + +```sh +brew install netdata +``` + +or from source: + +```sh +# install Xcode Command Line Tools +xcode-select --install +``` +click `Install` in the software update popup window, then +```sh +# install HomeBrew package manager +/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" + +# install required packages +brew install ossp-uuid autoconf automake pkg-config + +# download Netdata +git clone https://github.com/netdata/netdata.git --depth=100 + +# install Netdata in /usr/local/netdata +cd netdata +sudo ./netdata-installer.sh --install /usr/local +``` + +The installer will also install a startup plist to start Netdata when your Mac boots. + +##### Alpine 3.x + +Execute these commands to install Netdata in Alpine Linux 3.x: + +``` +# install required packages +apk add alpine-sdk bash curl zlib-dev util-linux-dev libmnl-dev gcc make git autoconf automake pkgconfig python logrotate + +# if you plan to run node.js Netdata plugins +apk add nodejs + +# download Netdata - the directory 'netdata' will be created +git clone https://github.com/netdata/netdata.git --depth=100 +cd netdata + + +# build it, install it, start it +./netdata-installer.sh + + +# make Netdata start at boot +echo -e "#!/usr/bin/env bash\n/usr/sbin/netdata" >/etc/local.d/netdata.start +chmod 755 /etc/local.d/netdata.start + +# make Netdata stop at shutdown +echo -e "#!/usr/bin/env bash\nkillall netdata" >/etc/local.d/netdata.stop +chmod 755 /etc/local.d/netdata.stop + +# enable the local service to start automatically +rc-update add local +``` + +##### Synology + +The documentation previously recommended installing the Debian Chroot package from the Synology community package sources and then running Netdata from within the chroot. This does not work, as the chroot environment does not have access to `/proc`, and therefore exposes very few metrics to Netdata. Additionally, [this issue](https://github.com/SynoCommunity/spksrc/issues/2758), still open as of 2018/06/24, indicates that the Debian Chroot package is not suitable for DSM versions greater than version 5 and may corrupt system libraries and render the NAS unable to boot. + +The good news is that the 64-bit static installer works fine if your NAS is one that uses the amd64 architecture. It will install the content into `/opt/netdata`, making future removal safe and simple. + +When Netdata is first installed, it will run as _root_. This may or may not be acceptable for you, and since other installations run it as the _netdata_ user, you might wish to do the same. This requires some extra work: + +1. Creat a group `netdata` via the Synology group interface. Give it no access to anything. +2. Create a user `netdata` via the Synology user interface. Give it no access to anything and a random password. Assign the user to the `netdata` group. Netdata will chuid to this user when running. +3. Change ownership of the following directories, as defined in [Netdata Security](../../docs/netdata-security.md#security-design): + +``` +$ chown -R root:netdata /opt/netdata/usr/share/netdata +$ chown -R netdata:netdata /opt/netdata/var/lib/netdata /opt/netdata/var/cache/netdata +$ chown -R netdata:root /opt/netdata/var/log/netdata +``` + +Additionally, as of 2018/06/24, the Netdata installer doesn't recognize DSM as an operating system, so no init script is installed. You'll have to do this manually: + +1. Add [this file](https://gist.github.com/oskapt/055d474d7bfef32c49469c1b53e8225f) as `/etc/rc.netdata`. Make it executable with `chmod 0755 /etc/rc.netdata`. +2. Edit `/etc/rc.local` and add a line calling `/etc/rc.netdata` to have it start on boot: + +``` +# Netdata startup +[ -x /etc/rc.netdata ] && /etc/rc.netdata start +``` + +[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Finstaller%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]() diff --git a/packaging/installer/UNINSTALL.md b/packaging/installer/UNINSTALL.md new file mode 100644 index 0000000..511693b --- /dev/null +++ b/packaging/installer/UNINSTALL.md @@ -0,0 +1,22 @@ +# Uninstalling netdata + +Our self-contained uninstaller is able to remove netdata installations created with shell installer. It doesn't need any other netdata repository files to be run. All it needs is an .environment file, which is created during installation (with shell installer) and put in ${NETDATA_USER_CONFIG_DIR}/.environment (by default /etc/netdata/.environment). That file contains some parameters which are passed to our installer and which are needed during uninstallation process. Mainly two parameters are needed: +``` +NETDATA_PREFIX +NETDATA_ADDED_TO_GROUPS +``` + +A workflow for uninstallation looks like this: + +1. Find your .environment file +2. If you cannot find that file and would like to uninstall netdata, then create new file with following content: +``` +NETDATA_PREFIX="<installation prefix>" # put what you used as a parameter to shell installed `--install` flag. Otherwise it should be empty +NETDATA_ADDED_TO_GROUPS="<additional groups>" # Additional groups for a user running netdata process +``` +3. Download [netdata-uninstaller.sh](https://github.com/netdata/netdata/blob/master/packaging/installer/netdata-uninstaller.sh) and run it as follows: `netdata-uninstaller.sh --yes --env <path_to_environment_file>`. The default `path_to_environment_file` is `/etc/netdata`, it's the location of the file `.environment` that is used by the uninstaller. + + +Note: This uninstallation method assumes previous installation with netdata-installer.sh or kickstart script. Currently using it when netdata was installed by a package manager can work or cause unexpected results. + +[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Finstaller%2FUNINSTALL&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]() diff --git a/packaging/installer/UPDATE.md b/packaging/installer/UPDATE.md new file mode 100644 index 0000000..7c0be83 --- /dev/null +++ b/packaging/installer/UPDATE.md @@ -0,0 +1,55 @@ +# Updating netdata after its installation + +![image8](https://cloud.githubusercontent.com/assets/2662304/14253735/536f4580-fa95-11e5-9f7b-99112b31a5d7.gif) + + +We suggest to keep your netdata updated. We are actively developing it and you should always update to the latest version. + +The update procedure depends on how you installed it: + +## You downloaded it from github using git + +### Manual update to get the latest git commit + +netdata versions older than `v1.12.0-rc2-52` had a `netdata-updater.sh` script in the root directory of the source code, which has now been deprecated. The manual process that works for all versions to get the latest commit in git is to use the `netdata-installer.sh`. The installer preserves your custom configuration and updates the the information of the installation in the `.environment` file under the user configuration directory. + +```sh +# go to the git downloaded directory +cd /path/to/git/downloaded/netdata + +# update your local copy +git pull + +# run the netdata installer +sudo ./netdata-installer.sh +``` + +_Netdata will be restarted with the new version._ + +Keep in mind, netdata may now have new features, or certain old features may now behave differently. So pay some attention to it after updating. + +### Manual update to get the latest nightly build + +The `kickstart.sh` one-liner will do a one-time update to the latest nightly build, if executed as follows: +``` +bash <(curl -Ss https://my-netdata.io/kickstart.sh --no-updates) +``` + +### Auto-update + +_Please, consider the risks of running an auto-update. Something can always go wrong. Keep an eye on your installation, and run a manual update if something ever fails._ + +Calling the `netdata-installer.sh` with the `--auto-update` or `-u` option will create the `netdata-updater` script under +either `/etc/cron.daily/`, or `/etc/periodic/daily/`. Whenever the `netdata-updater` is executed, it checks if a newer nightly build is available and then handles the download, installation and netdata restart. + +Note that after Jan 2019, the `kickstart.sh` one-liner `bash <(curl -Ss https://my-netdata.io/kickstart.sh)` calls the `netdata-installer.sh` with the auto-update option. So if you just run the one-liner without options once, your netdata will be kept auto-updated. + + +## You downloaded a binary package + +If you installed it from a binary package, the best way is to **obtain a newer copy** from the source you got it in the first place. + +If a newer version of netdata is not available from the source you got it, we suggest to uninstall the version you have and follow the **[[Installation]]** instructions for installing a fresh version of netdata. + + +[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Finstaller%2FUPDATE&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]() diff --git a/packaging/installer/functions.sh b/packaging/installer/functions.sh new file mode 100644 index 0000000..a2d7365 --- /dev/null +++ b/packaging/installer/functions.sh @@ -0,0 +1,797 @@ +# no shebang necessary - this is a library to be sourced +# SPDX-License-Identifier: GPL-3.0-or-later +# shellcheck disable=SC1091,SC1117,SC2002,SC2004,SC2034,SC2046,SC2059,SC2086,SC2129,SC2148,SC2154,SC2155,SC2162,SC2166,SC2181,SC2193 + +# make sure we have a UID +[ -z "${UID}" ] && UID="$(id -u)" + +# ----------------------------------------------------------------------------- +# checking the availability of commands + +which_cmd() { + # shellcheck disable=SC2230 + which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null +} + +check_cmd() { + which_cmd "${1}" >/dev/null 2>&1 && return 0 + return 1 +} + +# ----------------------------------------------------------------------------- + +setup_terminal() { + TPUT_RESET="" + TPUT_BLACK="" + TPUT_RED="" + TPUT_GREEN="" + TPUT_YELLOW="" + TPUT_BLUE="" + TPUT_PURPLE="" + TPUT_CYAN="" + TPUT_WHITE="" + TPUT_BGBLACK="" + TPUT_BGRED="" + TPUT_BGGREEN="" + TPUT_BGYELLOW="" + TPUT_BGBLUE="" + TPUT_BGPURPLE="" + TPUT_BGCYAN="" + TPUT_BGWHITE="" + TPUT_BOLD="" + TPUT_DIM="" + TPUT_UNDERLINED="" + TPUT_BLINK="" + TPUT_INVERTED="" + TPUT_STANDOUT="" + TPUT_BELL="" + TPUT_CLEAR="" + + # Is stderr on the terminal? If not, then fail + test -t 2 || return 1 + + if check_cmd tput; then + if [ $(($(tput colors 2>/dev/null))) -ge 8 ]; then + # Enable colors + TPUT_RESET="$(tput sgr 0)" + TPUT_BLACK="$(tput setaf 0)" + TPUT_RED="$(tput setaf 1)" + TPUT_GREEN="$(tput setaf 2)" + TPUT_YELLOW="$(tput setaf 3)" + TPUT_BLUE="$(tput setaf 4)" + TPUT_PURPLE="$(tput setaf 5)" + TPUT_CYAN="$(tput setaf 6)" + TPUT_WHITE="$(tput setaf 7)" + TPUT_BGBLACK="$(tput setab 0)" + TPUT_BGRED="$(tput setab 1)" + TPUT_BGGREEN="$(tput setab 2)" + TPUT_BGYELLOW="$(tput setab 3)" + TPUT_BGBLUE="$(tput setab 4)" + TPUT_BGPURPLE="$(tput setab 5)" + TPUT_BGCYAN="$(tput setab 6)" + TPUT_BGWHITE="$(tput setab 7)" + TPUT_BOLD="$(tput bold)" + TPUT_DIM="$(tput dim)" + TPUT_UNDERLINED="$(tput smul)" + TPUT_BLINK="$(tput blink)" + TPUT_INVERTED="$(tput rev)" + TPUT_STANDOUT="$(tput smso)" + TPUT_BELL="$(tput bel)" + TPUT_CLEAR="$(tput clear)" + fi + fi + + return 0 +} +setup_terminal || echo >/dev/null + +progress() { + echo >&2 " --- ${TPUT_DIM}${TPUT_BOLD}${*}${TPUT_RESET} --- " +} + +# ----------------------------------------------------------------------------- + +netdata_banner() { + local l1=" ^" \ + l2=" |.-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-" \ + l3=" | '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' " \ + l4=" +----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+--->" \ + sp=" " \ + netdata="netdata" start end msg="${*}" chartcolor="${TPUT_DIM}" + + [ ${#msg} -lt ${#netdata} ] && msg="${msg}${sp:0:$((${#netdata} - ${#msg}))}" + [ ${#msg} -gt $((${#l2} - 20)) ] && msg="${msg:0:$((${#l2} - 23))}..." + + start="$((${#l2} / 2 - 4))" + [ $((start + ${#msg} + 4)) -gt ${#l2} ] && start=$((${#l2} - ${#msg} - 4)) + end=$((start + ${#msg} + 4)) + + echo >&2 + echo >&2 "${chartcolor}${l1}${TPUT_RESET}" + echo >&2 "${chartcolor}${l2:0:start}${sp:0:2}${TPUT_RESET}${TPUT_BOLD}${TPUT_GREEN}${netdata}${TPUT_RESET}${chartcolor}${sp:0:$((end - start - 2 - ${#netdata}))}${l2:end:$((${#l2} - end))}${TPUT_RESET}" + echo >&2 "${chartcolor}${l3:0:start}${sp:0:2}${TPUT_RESET}${TPUT_BOLD}${TPUT_CYAN}${msg}${TPUT_RESET}${chartcolor}${sp:0:2}${l3:end:$((${#l2} - end))}${TPUT_RESET}" + echo >&2 "${chartcolor}${l4}${TPUT_RESET}" + echo >&2 +} + +# ----------------------------------------------------------------------------- +# portable service command + +service_cmd="$(which_cmd service)" +rcservice_cmd="$(which_cmd rc-service)" +systemctl_cmd="$(which_cmd systemctl)" +service() { + local cmd="${1}" action="${2}" + + if [ ! -z "${systemctl_cmd}" ]; then + run "${systemctl_cmd}" "${action}" "${cmd}" + return $? + elif [ ! -z "${service_cmd}" ]; then + run "${service_cmd}" "${cmd}" "${action}" + return $? + elif [ ! -z "${rcservice_cmd}" ]; then + run "${rcservice_cmd}" "${cmd}" "${action}" + return $? + fi + return 1 +} + +# ----------------------------------------------------------------------------- +# portable pidof + +pidof_cmd="$(which_cmd pidof)" +pidof() { + if [ ! -z "${pidof_cmd}" ]; then + ${pidof_cmd} "${@}" + return $? + else + ps -acxo pid,comm | + sed "s/^ *//g" | + grep netdata | + cut -d ' ' -f 1 + return $? + fi +} + +# ----------------------------------------------------------------------------- +# portable delete recursively interactively + +portable_deletedir_recursively_interactively() { + if [ ! -z "$1" -a -d "$1" ]; then + if [ "$(uname -s)" = "Darwin" ]; then + echo >&2 + read >&2 -p "Press ENTER to recursively delete directory '$1' > " + echo >&2 "Deleting directory '$1' ..." + run rm -R "$1" + else + echo >&2 + echo >&2 "Deleting directory '$1' ..." + run rm -I -R "$1" + fi + else + echo "Directory '$1' does not exist." + fi +} + +# ----------------------------------------------------------------------------- + +export SYSTEM_CPUS=1 +portable_find_processors() { + if [ -f "/proc/cpuinfo" ]; then + # linux + SYSTEM_CPUS=$(grep -c ^processor /proc/cpuinfo) + else + # freebsd + SYSTEM_CPUS=$(sysctl hw.ncpu 2>/dev/null | grep ^hw.ncpu | cut -d ' ' -f 2) + fi + [ -z "${SYSTEM_CPUS}" -o $((SYSTEM_CPUS)) -lt 1 ] && SYSTEM_CPUS=1 +} +portable_find_processors + +# ----------------------------------------------------------------------------- + +run_ok() { + printf >&2 "${TPUT_BGGREEN}${TPUT_WHITE}${TPUT_BOLD} OK ${TPUT_RESET} ${*} \n\n" +} + +run_failed() { + printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} FAILED ${TPUT_RESET} ${*} \n\n" +} + +ESCAPED_PRINT_METHOD= +printf "%q " test >/dev/null 2>&1 +[ $? -eq 0 ] && ESCAPED_PRINT_METHOD="printfq" +escaped_print() { + if [ "${ESCAPED_PRINT_METHOD}" = "printfq" ]; then + printf "%q " "${@}" + else + printf "%s" "${*}" + fi + return 0 +} + +run_logfile="/dev/null" +run() { + local user="${USER--}" dir="${PWD}" info info_console + + if [ "${UID}" = "0" ]; then + info="[root ${dir}]# " + info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]# " + else + info="[${user} ${dir}]$ " + info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]$ " + fi + + printf >>"${run_logfile}" "${info}" + escaped_print >>"${run_logfile}" "${@}" + printf >>"${run_logfile}" " ... " + + printf >&2 "${info_console}${TPUT_BOLD}${TPUT_YELLOW}" + escaped_print >&2 "${@}" + printf >&2 "${TPUT_RESET}\n" + + "${@}" + + local ret=$? + if [ ${ret} -ne 0 ]; then + run_failed + printf >>"${run_logfile}" "FAILED with exit code ${ret}\n" + else + run_ok + printf >>"${run_logfile}" "OK\n" + fi + + return ${ret} +} + +getent_cmd="$(which_cmd getent)" +portable_check_user_exists() { + local username="${1}" found= + + if [ ! -z "${getent_cmd}" ]; then + "${getent_cmd}" passwd "${username}" >/dev/null 2>&1 + return $? + fi + + found="$(cut -d ':' -f 1 </etc/passwd | grep "^${username}$")" + [ "${found}" = "${username}" ] && return 0 + return 1 +} + +portable_check_group_exists() { + local groupname="${1}" found= + + if [ ! -z "${getent_cmd}" ]; then + "${getent_cmd}" group "${groupname}" >/dev/null 2>&1 + return $? + fi + + found="$(cut -d ':' -f 1 </etc/group | grep "^${groupname}$")" + [ "${found}" = "${groupname}" ] && return 0 + return 1 +} + +portable_check_user_in_group() { + local username="${1}" groupname="${2}" users= + + if [ ! -z "${getent_cmd}" ]; then + users="$(getent group "${groupname}" | cut -d ':' -f 4)" + else + users="$(grep "^${groupname}:" </etc/group | cut -d ':' -f 4)" + fi + + [[ ",${users}," =~ ,${username}, ]] && return 0 + return 1 +} + +portable_add_user() { + local username="${1}" homedir="${2}" + + [ -z "${homedir}" ] && homedir="/tmp" + + portable_check_user_exists "${username}" + [ $? -eq 0 ] && echo >&2 "User '${username}' already exists." && return 0 + + echo >&2 "Adding ${username} user account with home ${homedir} ..." + + # shellcheck disable=SC2230 + local nologin="$(which nologin 2>/dev/null || command -v nologin 2>/dev/null || echo '/bin/false')" + + # Linux + if check_cmd useradd; then + run useradd -r -g "${username}" -c "${username}" -s "${nologin}" --no-create-home -d "${homedir}" "${username}" && return 0 + fi + + # FreeBSD + if check_cmd pw; then + run pw useradd "${username}" -d "${homedir}" -g "${username}" -s "${nologin}" && return 0 + fi + + # BusyBox + if check_cmd adduser; then + run adduser -h "${homedir}" -s "${nologin}" -D -G "${username}" "${username}" && return 0 + fi + + echo >&2 "Failed to add ${username} user account !" + + return 1 +} + +portable_add_group() { + local groupname="${1}" + + portable_check_group_exists "${groupname}" + [ $? -eq 0 ] && echo >&2 "Group '${groupname}' already exists." && return 0 + + echo >&2 "Adding ${groupname} user group ..." + + # Linux + if check_cmd groupadd; then + run groupadd -r "${groupname}" && return 0 + fi + + # FreeBSD + if check_cmd pw; then + run pw groupadd "${groupname}" && return 0 + fi + + # BusyBox + if check_cmd addgroup; then + run addgroup "${groupname}" && return 0 + fi + + echo >&2 "Failed to add ${groupname} user group !" + return 1 +} + +portable_add_user_to_group() { + local groupname="${1}" username="${2}" + + portable_check_group_exists "${groupname}" + [ $? -ne 0 ] && echo >&2 "Group '${groupname}' does not exist." && return 1 + + # find the user is already in the group + if portable_check_user_in_group "${username}" "${groupname}"; then + # username is already there + echo >&2 "User '${username}' is already in group '${groupname}'." + return 0 + else + # username is not in group + echo >&2 "Adding ${username} user to the ${groupname} group ..." + + # Linux + if check_cmd usermod; then + run usermod -a -G "${groupname}" "${username}" && return 0 + fi + + # FreeBSD + if check_cmd pw; then + run pw groupmod "${groupname}" -m "${username}" && return 0 + fi + + # BusyBox + if check_cmd addgroup; then + run addgroup "${username}" "${groupname}" && return 0 + fi + + echo >&2 "Failed to add user ${username} to group ${groupname} !" + return 1 + fi +} + +iscontainer() { + # man systemd-detect-virt + local cmd=$(which_cmd systemd-detect-virt) + if [ ! -z "${cmd}" -a -x "${cmd}" ]; then + "${cmd}" --container >/dev/null 2>&1 && return 0 + fi + + # /proc/1/sched exposes the host's pid of our init ! + # http://stackoverflow.com/a/37016302 + local pid=$(cat /proc/1/sched 2>/dev/null | head -n 1 | { + IFS='(),#:' read name pid th threads + echo $pid + }) + if [ ! -z "${pid}" ]; then + pid=$(( pid + 0 )) + [ ${pid} -gt 1 ] && return 0 + fi + + # lxc sets environment variable 'container' + [ ! -z "${container}" ] && return 0 + + # docker creates /.dockerenv + # http://stackoverflow.com/a/25518345 + [ -f "/.dockerenv" ] && return 0 + + # ubuntu and debian supply /bin/running-in-container + # https://www.apt-browse.org/browse/ubuntu/trusty/main/i386/upstart/1.12.1-0ubuntu4/file/bin/running-in-container + if [ -x "/bin/running-in-container" ]; then + "/bin/running-in-container" >/dev/null 2>&1 && return 0 + fi + + return 1 +} + +issystemd() { + local pids p myns ns systemctl + + # if the directory /lib/systemd/system OR /usr/lib/systemd/system (SLES 12.x) does not exit, it is not systemd + [ ! -d /lib/systemd/system -a ! -d /usr/lib/systemd/system ] && return 1 + + # if there is no systemctl command, it is not systemd + # shellcheck disable=SC2230 + systemctl=$(which systemctl 2>/dev/null || command -v systemctl 2>/dev/null) + [ -z "${systemctl}" -o ! -x "${systemctl}" ] && return 1 + + # if pid 1 is systemd, it is systemd + [ "$(basename $(readlink /proc/1/exe) 2>/dev/null)" = "systemd" ] && return 0 + + # if systemd is not running, it is not systemd + pids=$(pidof systemd 2>/dev/null) + [ -z "${pids}" ] && return 1 + + # check if the running systemd processes are not in our namespace + myns="$(readlink /proc/self/ns/pid 2>/dev/null)" + for p in ${pids}; do + ns="$(readlink /proc/${p}/ns/pid 2>/dev/null)" + + # if pid of systemd is in our namespace, it is systemd + [ ! -z "${myns}" ] && [ "${myns}" = "${ns}" ] && return 0 + done + + # else, it is not systemd + return 1 +} + +install_non_systemd_init() { + [ "${UID}" != 0 ] && return 1 + + local key="unknown" + if [ -f /etc/os-release ]; then + source /etc/os-release || return 1 + key="${ID}-${VERSION_ID}" + + elif [ -f /etc/redhat-release ]; then + key=$(</etc/redhat-release) + fi + + if [ -d /etc/init.d -a ! -f /etc/init.d/netdata ]; then + if [[ ${key} =~ ^(gentoo|alpine).* ]]; then + echo >&2 "Installing OpenRC init file..." + run cp system/netdata-openrc /etc/init.d/netdata && + run chmod 755 /etc/init.d/netdata && + run rc-update add netdata default && + return 0 + + elif [ "${key}" = "debian-7" \ + -o "${key}" = "ubuntu-12.04" \ + -o "${key}" = "ubuntu-14.04" \ + ]; then + echo >&2 "Installing LSB init file..." + run cp system/netdata-lsb /etc/init.d/netdata && + run chmod 755 /etc/init.d/netdata && + run update-rc.d netdata defaults && + run update-rc.d netdata enable && + return 0 + elif [[ ${key} =~ ^(amzn-201[5678]|ol|CentOS release 6|Red Hat Enterprise Linux Server release 6|Scientific Linux CERN SLC release 6|CloudLinux Server release 6).* ]]; then + echo >&2 "Installing init.d file..." + run cp system/netdata-init-d /etc/init.d/netdata && + run chmod 755 /etc/init.d/netdata && + run chkconfig netdata on && + return 0 + else + echo >&2 "I don't know what init file to install on system '${key}'. Open a github issue to help us fix it." + return 1 + fi + elif [ -f /etc/init.d/netdata ]; then + echo >&2 "file '/etc/init.d/netdata' already exists." + return 0 + else + echo >&2 "I don't know what init file to install on system '${key}'. Open a github issue to help us fix it." + fi + + return 1 +} + +NETDATA_START_CMD="netdata" +NETDATA_STOP_CMD="killall netdata" + +install_netdata_service() { + local uname="$(uname 2>/dev/null)" + + if [ "${UID}" -eq 0 ]; then + if [ "${uname}" = "Darwin" ]; then + + if [ -f "/Library/LaunchDaemons/com.github.netdata.plist" ]; then + echo >&2 "file '/Library/LaunchDaemons/com.github.netdata.plist' already exists." + return 0 + else + echo >&2 "Installing MacOS X plist file..." + run cp system/netdata.plist /Library/LaunchDaemons/com.github.netdata.plist && + run launchctl load /Library/LaunchDaemons/com.github.netdata.plist && + return 0 + fi + + elif [ "${uname}" = "FreeBSD" ]; then + + run cp system/netdata-freebsd /etc/rc.d/netdata && + NETDATA_START_CMD="service netdata start" && + NETDATA_STOP_CMD="service netdata stop" && + return 0 + + elif issystemd; then + # systemd is running on this system + NETDATA_START_CMD="systemctl start netdata" + NETDATA_STOP_CMD="systemctl stop netdata" + + SYSTEMD_DIRECTORY="" + + if [ -d "/lib/systemd/system" ]; then + SYSTEMD_DIRECTORY="/lib/systemd/system" + elif [ -d "/usr/lib/systemd/system" ]; then + SYSTEMD_DIRECTORY="/usr/lib/systemd/system" + fi + + if [ "${SYSTEMD_DIRECTORY}x" != "x" ]; then + echo >&2 "Installing systemd service..." + run cp system/netdata.service "${SYSTEMD_DIRECTORY}/netdata.service" && + run systemctl daemon-reload && + run systemctl enable netdata && + return 0 + else + echo >&2 "no systemd directory; cannot install netdata.service" + fi + else + install_non_systemd_init + local ret=$? + + if [ ${ret} -eq 0 ]; then + if [ ! -z "${service_cmd}" ]; then + NETDATA_START_CMD="service netdata start" + NETDATA_STOP_CMD="service netdata stop" + elif [ ! -z "${rcservice_cmd}" ]; then + NETDATA_START_CMD="rc-service netdata start" + NETDATA_STOP_CMD="rc-service netdata stop" + fi + fi + + return ${ret} + fi + fi + + return 1 +} + +# ----------------------------------------------------------------------------- +# stop netdata + +pidisnetdata() { + if [ -d /proc/self ]; then + [ -z "$1" -o ! -f "/proc/$1/stat" ] && return 1 + [ "$(cat "/proc/$1/stat" | cut -d '(' -f 2 | cut -d ')' -f 1)" = "netdata" ] && return 0 + return 1 + fi + return 0 +} + +stop_netdata_on_pid() { + local pid="${1}" ret=0 count=0 + + pidisnetdata ${pid} || return 0 + + printf >&2 "Stopping netdata on pid ${pid} ..." + while [ ! -z "$pid" -a ${ret} -eq 0 ]; do + if [ ${count} -gt 45 ]; then + echo >&2 "Cannot stop the running netdata on pid ${pid}." + return 1 + fi + + count=$((count + 1)) + + run kill ${pid} 2>/dev/null + ret=$? + + test ${ret} -eq 0 && printf >&2 "." && sleep 2 + done + + echo >&2 + if [ ${ret} -eq 0 ]; then + echo >&2 "SORRY! CANNOT STOP netdata ON PID ${pid} !" + return 1 + fi + + echo >&2 "netdata on pid ${pid} stopped." + return 0 +} + +netdata_pids() { + local p myns ns + + myns="$(readlink /proc/self/ns/pid 2>/dev/null)" + + # echo >&2 "Stopping a (possibly) running netdata (namespace '${myns}')..." + + for p in \ + $(cat /var/run/netdata.pid 2>/dev/null) \ + $(cat /var/run/netdata/netdata.pid 2>/dev/null) \ + $(pidof netdata 2>/dev/null); do + ns="$(readlink /proc/${p}/ns/pid 2>/dev/null)" + + if [ -z "${myns}" -o -z "${ns}" -o "${myns}" = "${ns}" ]; then + pidisnetdata ${p} && echo "${p}" + fi + done +} + +stop_all_netdata() { + local p + for p in $(netdata_pids); do + stop_netdata_on_pid ${p} + done +} + +# ----------------------------------------------------------------------------- +# restart netdata + +restart_netdata() { + local netdata="${1}" + shift + + local started=0 + + progress "Start netdata" + + if [ "${UID}" -eq 0 ]; then + service netdata stop + stop_all_netdata + service netdata restart && started=1 + + if [ ${started} -eq 1 -a -z "$(netdata_pids)" ]; then + echo >&2 "Ooops! it seems netdata is not started." + started=0 + fi + + if [ ${started} -eq 0 ]; then + service netdata start && started=1 + fi + fi + + if [ ${started} -eq 1 -a -z "$(netdata_pids)" ]; then + echo >&2 "Hm... it seems netdata is still not started." + started=0 + fi + + if [ ${started} -eq 0 ]; then + # still not started... + + run stop_all_netdata + run "${netdata}" "${@}" + return $? + fi + + return 0 +} + +# ----------------------------------------------------------------------------- +# install netdata logrotate + +install_netdata_logrotate() { + if [ ${UID} -eq 0 ]; then + if [ -d /etc/logrotate.d ]; then + if [ ! -f /etc/logrotate.d/netdata ]; then + run cp system/netdata.logrotate /etc/logrotate.d/netdata + fi + + if [ -f /etc/logrotate.d/netdata ]; then + run chmod 644 /etc/logrotate.d/netdata + fi + + return 0 + fi + fi + + return 1 +} + +# ----------------------------------------------------------------------------- +# download netdata.conf + +fix_netdata_conf() { + local owner="${1}" + + if [ "${UID}" -eq 0 ]; then + run chown "${owner}" "${filename}" + fi + run chmod 0664 "${filename}" +} + +generate_netdata_conf() { + local owner="${1}" filename="${2}" url="${3}" + + if [ ! -s "${filename}" ]; then + cat >"${filename}" <<EOFCONF +# netdata can generate its own config. +# Get it with: +# +# wget -O ${filename} "${url}" +# +# or +# +# curl -s -o ${filename} "${url}" +# +EOFCONF + fix_netdata_conf "${owner}" + fi +} + +download_netdata_conf() { + local owner="${1}" filename="${2}" url="${3}" + + if [ ! -s "${filename}" ]; then + echo >&2 + echo >&2 "-------------------------------------------------------------------------------" + echo >&2 + echo >&2 "Downloading default configuration from netdata..." + sleep 5 + + # remove a possibly obsolete download + [ -f "${filename}.new" ] && rm "${filename}.new" + + # disable a proxy to get data from the local netdata + export http_proxy= + export https_proxy= + + # try curl + run curl -s -o "${filename}.new" "${url}" + ret=$? + + if [ ${ret} -ne 0 -o ! -s "${filename}.new" ]; then + # try wget + run wget -O "${filename}.new" "${url}" + ret=$? + fi + + if [ ${ret} -eq 0 -a -s "${filename}.new" ]; then + run mv "${filename}.new" "${filename}" + run_ok "New configuration saved for you to edit at ${filename}" + else + [ -f "${filename}.new" ] && rm "${filename}.new" + run_failed "Cannnot download configuration from netdata daemon using url '${url}'" + + generate_netdata_conf "${owner}" "${filename}" "${url}" + fi + + fix_netdata_conf "${owner}" + fi +} + +# ----------------------------------------------------------------------------- +# add netdata user and group + +NETDATA_WANTED_GROUPS="docker nginx varnish haproxy adm nsd proxy squid ceph nobody" +NETDATA_ADDED_TO_GROUPS="" +add_netdata_user_and_group() { + local homedir="${1}" g + + if [ ${UID} -eq 0 ]; then + portable_add_group netdata || return 1 + portable_add_user netdata "${homedir}" || return 1 + + for g in ${NETDATA_WANTED_GROUPS}; do + portable_add_user_to_group ${g} netdata && NETDATA_ADDED_TO_GROUPS="${NETDATA_ADDED_TO_GROUPS} ${g}" + done + + [ ~netdata = / ] && cat <<USERMOD + +The netdata user has its home directory set to / +You may want to change it, using this command: + +# usermod -d "${homedir}" netdata + +USERMOD + return 0 + fi + + return 1 +} diff --git a/packaging/installer/kickstart-static64.sh b/packaging/installer/kickstart-static64.sh new file mode 100755 index 0000000..cd13c41 --- /dev/null +++ b/packaging/installer/kickstart-static64.sh @@ -0,0 +1,252 @@ +#!/usr/bin/env sh +# SPDX-License-Identifier: GPL-3.0-or-later +# shellcheck disable=SC1117,SC2016,SC2034,SC2039,SC2059,SC2086,SC2119,SC2120,SC2129,SC2162,SC2166,SC2181 + +umask 022 + +# make sure UID is set +# shellcheck disable=SC2155 +[ -z "${UID}" ] && export UID="$(id -u)" + +# --------------------------------------------------------------------------------------------------------------------- +# library functions copied from packaging/installer/functions.sh + +which_cmd() { + # shellcheck disable=SC2230 + which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null +} + +check_cmd() { + which_cmd "${1}" >/dev/null 2>&1 && return 0 + return 1 +} + +setup_terminal() { + TPUT_RESET="" + TPUT_BLACK="" + TPUT_RED="" + TPUT_GREEN="" + TPUT_YELLOW="" + TPUT_BLUE="" + TPUT_PURPLE="" + TPUT_CYAN="" + TPUT_WHITE="" + TPUT_BGBLACK="" + TPUT_BGRED="" + TPUT_BGGREEN="" + TPUT_BGYELLOW="" + TPUT_BGBLUE="" + TPUT_BGPURPLE="" + TPUT_BGCYAN="" + TPUT_BGWHITE="" + TPUT_BOLD="" + TPUT_DIM="" + TPUT_UNDERLINED="" + TPUT_BLINK="" + TPUT_INVERTED="" + TPUT_STANDOUT="" + TPUT_BELL="" + TPUT_CLEAR="" + + # Is stderr on the terminal? If not, then fail + test -t 2 || return 1 + + if check_cmd tput + then + if [ $(( $(tput colors 2>/dev/null) )) -ge 8 ] + then + # Enable colors + TPUT_RESET="$(tput sgr 0)" + TPUT_BLACK="$(tput setaf 0)" + TPUT_RED="$(tput setaf 1)" + TPUT_GREEN="$(tput setaf 2)" + TPUT_YELLOW="$(tput setaf 3)" + TPUT_BLUE="$(tput setaf 4)" + TPUT_PURPLE="$(tput setaf 5)" + TPUT_CYAN="$(tput setaf 6)" + TPUT_WHITE="$(tput setaf 7)" + TPUT_BGBLACK="$(tput setab 0)" + TPUT_BGRED="$(tput setab 1)" + TPUT_BGGREEN="$(tput setab 2)" + TPUT_BGYELLOW="$(tput setab 3)" + TPUT_BGBLUE="$(tput setab 4)" + TPUT_BGPURPLE="$(tput setab 5)" + TPUT_BGCYAN="$(tput setab 6)" + TPUT_BGWHITE="$(tput setab 7)" + TPUT_BOLD="$(tput bold)" + TPUT_DIM="$(tput dim)" + TPUT_UNDERLINED="$(tput smul)" + TPUT_BLINK="$(tput blink)" + TPUT_INVERTED="$(tput rev)" + TPUT_STANDOUT="$(tput smso)" + TPUT_BELL="$(tput bel)" + TPUT_CLEAR="$(tput clear)" + fi + fi + + return 0 +} +setup_terminal || echo >/dev/null + +progress() { + echo >&2 " --- ${TPUT_DIM}${TPUT_BOLD}${*}${TPUT_RESET} --- " +} + +run_ok() { + printf >&2 "${TPUT_BGGREEN}${TPUT_WHITE}${TPUT_BOLD} OK ${TPUT_RESET} ${*} \n\n" +} + +run_failed() { + printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} FAILED ${TPUT_RESET} ${*} \n\n" +} + +ESCAPED_PRINT_METHOD= +printf "%q " test >/dev/null 2>&1 +[ $? -eq 0 ] && ESCAPED_PRINT_METHOD="printfq" +escaped_print() { + if [ "${ESCAPED_PRINT_METHOD}" = "printfq" ] + then + printf "%q " "${@}" + else + printf "%s" "${*}" + fi + return 0 +} + +run_logfile="/dev/null" +run() { + local user="${USER--}" dir="${PWD}" info info_console + + if [ "${UID}" = "0" ] + then + info="[root ${dir}]# " + info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]# " + else + info="[${user} ${dir}]$ " + info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]$ " + fi + + printf >> "${run_logfile}" "${info}" + escaped_print >> "${run_logfile}" "${@}" + printf >> "${run_logfile}" " ... " + + printf >&2 "${info_console}${TPUT_BOLD}${TPUT_YELLOW}" + escaped_print >&2 "${@}" + printf >&2 "${TPUT_RESET}\n" + + "${@}" + + local ret=$? + if [ ${ret} -ne 0 ] + then + run_failed + printf >> "${run_logfile}" "FAILED with exit code ${ret}\n" + else + run_ok + printf >> "${run_logfile}" "OK\n" + fi + + return ${ret} +} + + +# --------------------------------------------------------------------------------------------------------------------- + +fatal() { + printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} ABORTED ${TPUT_RESET} ${*} \n\n" + exit 1 +} + +# --------------------------------------------------------------------------------------------------------------------- + +if [ "$(uname -m)" != "x86_64" ] + then + fatal "Static binary versions of netdata are available only for 64bit Intel/AMD CPUs (x86_64), but yours is: $(uname -m)." +fi + +if [ "$(uname -s)" != "Linux" ] + then + fatal "Static binary versions of netdata are available only for Linux, but this system is $(uname -s)" +fi + +curl="$(which_cmd curl)" +wget="$(which_cmd wget)" + +# --------------------------------------------------------------------------------------------------------------------- + +progress "Checking the latest version of static build..." + +BASE='https://raw.githubusercontent.com/netdata/binary-packages/master' + +LATEST= +if [ ! -z "${curl}" -a -x "${curl}" ] +then + LATEST="$(run ${curl} "${BASE}/netdata-latest.gz.run")" +elif [ ! -z "${wget}" -a -x "${wget}" ] +then + LATEST="$(run ${wget} -O - "${BASE}/netdata-latest.gz.run")" +else + fatal "curl or wget are needed for this script to work." +fi + +if [ -z "${LATEST}" ] + then + fatal "Cannot find the latest static binary version of netdata." +fi + +# --------------------------------------------------------------------------------------------------------------------- + +progress "Downloading static netdata binary: ${LATEST}" + +ret=1 +if [ ! -z "${curl}" -a -x "${curl}" ] +then + run ${curl} "${BASE}/${LATEST}" >"/tmp/${LATEST}" + ret=$? +elif [ ! -z "${wget}" -a -x "${wget}" ] +then + run ${wget} -O "/tmp/${LATEST}" "${BASE}/${LATEST}" + ret=$? +else + fatal "curl or wget are needed for this script to work." +fi + +if [ ${ret} -ne 0 -o ! -s "/tmp/${LATEST}" ] + then + fatal "Failed to download the latest static binary version of netdata." +fi + +# --------------------------------------------------------------------------------------------------------------------- + +opts= +inner_opts= +while [ ! -z "${1}" ] +do + if [ "${1}" = "--dont-wait" -o "${1}" = "--non-interactive" -o "${1}" = "--accept" ] + then + opts="${opts} --accept" + elif [ "${1}" = "--dont-start-it" ] + then + inner_opts="${inner_opts} ${1}" + else + echo >&2 "Unknown option '${1}'" + exit 1 + fi + shift +done +[ ! -z "${inner_opts}" ] && inner_opts="-- ${inner_opts}" + +# --------------------------------------------------------------------------------------------------------------------- + +progress "Installing netdata" + +sudo= +[ "${UID}" != "0" ] && sudo="sudo" +run ${sudo} sh "/tmp/${LATEST}" ${opts} ${inner_opts} + +if [ $? -eq 0 ] + then + rm "/tmp/${LATEST}" +else + echo >&2 "NOTE: did not remove: /tmp/${LATEST}" +fi diff --git a/packaging/installer/kickstart.sh b/packaging/installer/kickstart.sh new file mode 100755 index 0000000..2a5c874 --- /dev/null +++ b/packaging/installer/kickstart.sh @@ -0,0 +1,272 @@ +#!/usr/bin/env sh +# SPDX-License-Identifier: GPL-3.0-or-later +# +# Run me with: +# +# bash <(curl -Ss https://my-netdata.io/kickstart.sh) +# +# or (to install all netdata dependencies): +# +# bash <(curl -Ss https://my-netdata.io/kickstart.sh) all +# +# Other options: +# --dont-wait do not prompt for user input +# --non-interactive do not prompt for user input +# --no-updates do not install script for daily updates +# +# This script will: +# +# 1. install all netdata compilation dependencies +# using the package manager of the system +# +# 2. download netdata nightly package to temporary directory +# +# 3. install netdata + +# shellcheck disable=SC2039,SC2059,SC2086 + +# External files +PACKAGES_SCRIPT="https://raw.githubusercontent.com/netdata/netdata-demo-site/master/install-required-packages.sh" +NIGHTLY_PACKAGE_TARBALL="https://storage.googleapis.com/netdata-nightlies/netdata-latest.tar.gz" +NIGHTLY_PACKAGE_CHECKSUM="https://storage.googleapis.com/netdata-nightlies/sha256sums.txt" + +# --------------------------------------------------------------------------------------------------------------------- +# library functions copied from packaging/installer/functions.sh + +setup_terminal() { + TPUT_RESET="" + TPUT_YELLOW="" + TPUT_WHITE="" + TPUT_BGRED="" + TPUT_BGGREEN="" + TPUT_BOLD="" + TPUT_DIM="" + + # Is stderr on the terminal? If not, then fail + test -t 2 || return 1 + + if command -v tput >/dev/null 2>&1; then + if [ $(($(tput colors 2>/dev/null))) -ge 8 ]; then + # Enable colors + TPUT_RESET="$(tput sgr 0)" + TPUT_YELLOW="$(tput setaf 3)" + TPUT_WHITE="$(tput setaf 7)" + TPUT_BGRED="$(tput setab 1)" + TPUT_BGGREEN="$(tput setab 2)" + TPUT_BOLD="$(tput bold)" + TPUT_DIM="$(tput dim)" + fi + fi + + return 0 +} + +progress() { + echo >&2 " --- ${TPUT_DIM}${TPUT_BOLD}${*}${TPUT_RESET} --- " +} + +escaped_print() { + if printf "%q " test >/dev/null 2>&1; then + printf "%q " "${@}" + else + printf "%s" "${*}" + fi + return 0 +} + +run() { + local dir="${PWD}" info_console + + if [ "${UID}" = "0" ]; then + info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]# " + else + info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]$ " + fi + + escaped_print "${info_console}${TPUT_BOLD}${TPUT_YELLOW}" "${@}" "${TPUT_RESET}\n" >&2 + + "${@}" + + local ret=$? + if [ ${ret} -ne 0 ]; then + printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} FAILED ${TPUT_RESET} ${*} \n\n" + else + printf >&2 "${TPUT_BGGREEN}${TPUT_WHITE}${TPUT_BOLD} OK ${TPUT_RESET} ${*} \n\n" + fi + + return ${ret} +} + +warning() { + printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} WARNING ${TPUT_RESET} ${*} \n\n" + if [ "${INTERACTIVE}" = "0" ]; then + fatal "Stopping due to non-interactive mode. Fix the issue or retry installation in an interactive mode." + else + read -r -p "Press ENTER to attempt netdata installation > " + progress "OK, let's give it a try..." + fi +} + +fatal() { + printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} ABORTED ${TPUT_RESET} ${*} \n\n" + exit 1 +} + +download() { + url="${1}" + dest="${2}" + if command -v wget >/dev/null 2>&1; then + run wget -O - "${url}" >"${dest}" || fatal "Cannot download ${url}" + elif command -v curl >/dev/null 2>&1; then + run curl "${url}" >"${dest}" || fatal "Cannot download ${url}" + else + fatal "I need curl or wget to proceed, but neither is available on this system." + fi +} + +detect_bash4() { + bash="${1}" + if [ -z "${BASH_VERSION}" ]; then + # we don't run under bash + if [ -n "${bash}" ] && [ -x "${bash}" ]; then + # shellcheck disable=SC2016 + BASH_MAJOR_VERSION=$(${bash} -c 'echo "${BASH_VERSINFO[0]}"') + fi + else + # we run under bash + BASH_MAJOR_VERSION="${BASH_VERSINFO[0]}" + fi + + if [ -z "${BASH_MAJOR_VERSION}" ]; then + echo >&2 "No BASH is available on this system" + return 1 + elif [ $((BASH_MAJOR_VERSION)) -lt 4 ]; then + echo >&2 "No BASH v4+ is available on this system (installed bash is v${BASH_MAJOR_VERSION}" + return 1 + fi + return 0 +} + +umask 022 + +sudo="" +[ -z "${UID}" ] && UID="$(id -u)" +[ "${UID}" -ne "0" ] && sudo="sudo" +export PATH="${PATH}:/usr/local/bin:/usr/local/sbin" + +setup_terminal || echo >/dev/null + +# --------------------------------------------------------------------------------------------------------------------- +# try to update using autoupdater in the first place + +updater="" +[ -x /etc/periodic/daily/netdata-updater ] && updater=/etc/periodic/daily/netdata-updater +[ -x /etc/cron.daily/netdata-updater ] && updater=/etc/cron.daily/netdata-updater +if [ -L "${updater}" ]; then + # remove old updater (symlink) + run "${sudo}" rm -f "${updater}" + updater="" +fi +if [ -n "${updater}" ]; then + # attempt to run the updater, to respect any compilation settings already in place + progress "Re-installing netdata..." + run "${sudo}" "${updater}" -f || fatal "Failed to forcefully update netdata" + exit 0 +fi + +# --------------------------------------------------------------------------------------------------------------------- +# install required system packages + +INTERACTIVE=1 +PACKAGES_INSTALLER_OPTIONS="netdata" +NETDATA_INSTALLER_OPTIONS="" +NETDATA_UPDATES="--auto-update" +while [ -n "${1}" ]; do + if [ "${1}" = "all" ]; then + PACKAGES_INSTALLER_OPTIONS="netdata-all" + shift 1 + elif [ "${1}" = "--dont-wait" ] || [ "${1}" = "--non-interactive" ]; then + INTERACTIVE=0 + shift 1 + elif [ "${1}" = "--no-updates" ]; then + # echo >&2 "netdata will not auto-update" + NETDATA_UPDATES= + shift 1 + else + break + fi +done + +if [ "${INTERACTIVE}" = "0" ]; then + PACKAGES_INSTALLER_OPTIONS="--dont-wait --non-interactive ${PACKAGES_INSTALLER_OPTIONS}" + NETDATA_INSTALLER_OPTIONS="--dont-wait" +fi + +# --------------------------------------------------------------------------------------------------------------------- +# detect system parameters and install dependencies + +SYSTEM="$(uname -s)" +OS="$(uname -o)" +MACHINE="$(uname -m)" + +cat <<EOF +System : ${SYSTEM} +Operating System : ${OS} +Machine : ${MACHINE} +BASH major version: ${BASH_MAJOR_VERSION} +EOF + +# Check if tmp is mounted as noexec +if grep -Eq '^[^ ]+ /tmp [^ ]+ ([^ ]*,)?noexec[, ]' /proc/mounts; then + pattern="/opt/netdata-kickstart-XXXXXX" +else + pattern="/tmp/netdata-kickstart-XXXXXX" +fi + +tmpdir="$(mktemp -d $pattern)" +cd "${tmpdir}" || : + +if [ "${OS}" != "GNU/Linux" ] && [ "${SYSTEM}" != "Linux" ]; then + warning "Cannot detect the packages to be installed on a ${SYSTEM} - ${OS} system." +else + bash="$(command -v bash 2>/dev/null)" + if ! detect_bash4 "${bash}"; then + warning "Cannot detect packages to be installed in this system, without BASH v4+." + else + progress "Downloading script to detect required packages..." + download "${PACKAGES_SCRIPT}" "${tmpdir}/install-required-packages.sh" + if [ ! -s "${tmpdir}/install-required-packages.sh" ]; then + warning "Downloaded dependency installation script is empty." + else + progress "Running downloaded script to detect required packages..." + run ${sudo} "${bash}" "${tmpdir}/install-required-packages.sh" ${PACKAGES_INSTALLER_OPTIONS} + if [ $? -ne 0 ] ; then + warning "It failed to install all the required packages, but installation might still be possible." + fi + fi + + fi +fi + +# --------------------------------------------------------------------------------------------------------------------- +# download netdata nightly package + +download "${NIGHTLY_PACKAGE_CHECKSUM}" "${tmpdir}/sha256sum.txt" +download "${NIGHTLY_PACKAGE_TARBALL}" "${tmpdir}/netdata-latest.tar.gz" +if ! grep netdata-latest.tar.gz sha256sum.txt | sha256sum --check - >/dev/null 2>&1; then + failed "Tarball checksum validation failed. Stopping netdata installation and leaving tarball in ${tmpdir}" +fi +run tar -xf netdata-latest.tar.gz +rm -rf netdata-latest.tar.gz >/dev/null 2>&1 +cd netdata-* || fatal "Cannot cd to netdata source tree" + +# --------------------------------------------------------------------------------------------------------------------- +# install netdata from source + +if [ -x netdata-installer.sh ]; then + progress "Installing netdata..." + run ${sudo} ./netdata-installer.sh ${NETDATA_UPDATES} ${NETDATA_INSTALLER_OPTIONS} "${@}" || fatal "netdata-installer.sh exited with error" + rm -rf "${tmpdir}" >/dev/null 2>&1 +else + fatal "Cannot install netdata from source (the source directory does not include netdata-installer.sh). Leaving all files in ${tmpdir}" +fi diff --git a/packaging/installer/netdata-uninstaller.sh b/packaging/installer/netdata-uninstaller.sh new file mode 100755 index 0000000..96dd629 --- /dev/null +++ b/packaging/installer/netdata-uninstaller.sh @@ -0,0 +1,169 @@ +#!/usr/bin/env bash +#shellcheck disable=SC2181 + +# this script will uninstall netdata + +# Variables needed by script and taken from '.environment' file: +# - NETDATA_PREFIX +# - NETDATA_ADDED_TO_GROUPS + +usage="$(basename "$0") [-h] [-f ] -- program to calculate the answer to life, the universe and everything + +where: + -e, --env path to environment file (defauls to '/etc/netdata/.environment' + -f, --force force uninstallation and do not ask any questions + -h show this help text + -y, --yes flag needs to be set to proceed with uninstallation" + +FILE_REMOVAL_STATUS=0 +ENVIRONMENT_FILE="/etc/netdata/.environment" +INTERACTIVITY="-i" +YES=0 +while :; do + case "$1" in + -h | --help) + echo "$usage" >&2 + exit 1 + ;; + -f | --force) + INTERACTIVITY="-f" + shift + ;; + -y | --yes) + YES=1 + shift + ;; + -e | --env) + ENVIRONMENT_FILE="$2" + shift 2 + ;; + -*) + echo "$usage" >&2 + exit 1 + ;; + *) break ;; + esac +done + +if [ "$YES" != "1" ]; then + echo "This script will REMOVE netdata from your system." + echo "Run it again with --yes to do it." + exit 1 +fi + +if [[ $EUID -ne 0 ]]; then + echo "This script SHOULD be run as root or otherwise it won't delete all installed components." + key="n" + read -r -s -n 1 -p "Do you want to continue as non-root user [y/n] ? " key + if [ "$key" != "y" ] && [ "$key" != "Y" ]; then + exit 1 + fi +fi + +function quit_msg() { + echo + if [ "$FILE_REMOVAL_STATUS" -eq 0 ]; then + echo "Something went wrong :(" + else + echo "Netdata files were successfully removed from your system" + fi +} + +function user_input() { + TEXT="$1" + if [ "${INTERACTIVITY}" == "-i" ]; then + read -r -p "$TEXT" >&2 + fi +} + +function rm_file() { + FILE="$1" + if [ -f "${FILE}" ]; then + rm -v ${INTERACTIVITY} "${FILE}" + fi +} + +function rm_dir() { + DIR="$1" + if [ -n "$DIR" ] && [ -d "$DIR" ]; then + user_input "Press ENTER to recursively delete directory '$DIR' > " + rm -v -f -R "${DIR}" + fi +} + +netdata_pids() { + local p myns ns + myns="$(readlink /proc/self/ns/pid 2>/dev/null)" + for p in \ + $(cat /var/run/netdata.pid 2>/dev/null) \ + $(cat /var/run/netdata/netdata.pid 2>/dev/null) \ + $(pidof netdata 2>/dev/null); do + + ns="$(readlink "/proc/${p}/ns/pid" 2>/dev/null)" + #shellcheck disable=SC2002 + if [ -z "${myns}" ] || [ -z "${ns}" ] || [ "${myns}" = "${ns}" ]; then + name="$(cat "/proc/${p}/stat" 2>/dev/null | cut -d '(' -f 2 | cut -d ')' -f 1)" + if [ "${name}" = "netdata" ]; then + echo "${p}" + fi + fi + done +} + +trap quit_msg EXIT + +#shellcheck source=/dev/null +source "${ENVIRONMENT_FILE}" || exit 1 + +#### STOP NETDATA +echo "Stopping a possibly running netdata..." +for p in $(netdata_pids); do + i=0 + while kill "${p}" 2>/dev/null; do + if [ "$i" -gt 30 ]; then + echo "Forcefully stopping netdata with pid ${p}" + kill -9 "${p}" + sleep 2 + break + fi + sleep 1 + i=$((i + 1)) + done +done +sleep 2 + +#### REMOVE NETDATA FILES +rm_file /etc/logrotate.d/netdata +rm_file /etc/systemd/system/netdata.service +rm_file /lib/systemd/system/netdata.service +rm_file /usr/lib/systemd/system/netdata.service +rm_file /etc/init.d/netdata +rm_file /etc/periodic/daily/netdata-updater +rm_file /etc/cron.daily/netdata-updater + +if [ -n "${NETDATA_PREFIX}" ] && [ -d "${NETDATA_PREFIX}" ]; then + rm_dir "${NETDATA_PREFIX}" +else + rm_file "/usr/sbin/netdata" + rm_dir "/usr/share/netdata" + rm_dir "/usr/libexec/netdata" + rm_dir "/var/lib/netdata" + rm_dir "/var/cache/netdata" + rm_dir "/var/log/netdata" + rm_dir "/etc/netdata" +fi + +FILE_REMOVAL_STATUS=1 + +#### REMOVE NETDATA USER & GROUP +if [ -n "$NETDATA_ADDED_TO_GROUPS" ]; then + user_input "Press ENTER to delete 'netdata' from following groups: '$NETDATA_ADDED_TO_GROUPS' > " + for group in $NETDATA_ADDED_TO_GROUPS; do + gpasswd -d netdata "${group}" + done +fi + +user_input "Press ENTER to delete 'netdata' system user > " +userdel -f netdata || : +user_input "Press ENTER to delete 'netdata' system group > " +groupdel -f netdata || : diff --git a/packaging/installer/netdata-updater.sh b/packaging/installer/netdata-updater.sh new file mode 100644 index 0000000..96f7c12 --- /dev/null +++ b/packaging/installer/netdata-updater.sh @@ -0,0 +1,115 @@ +#!/usr/bin/env bash +#shellcheck disable=SC2164 + +# this script will uninstall netdata + +# Variables needed by script: +# - PATH +# - CFLAGS +# - NETDATA_CONFIGURE_OPTIONS +# - REINSTALL_COMMAND +# - NETDATA_TARBALL_URL +# - NETDATA_TARBALL_CHECKSUM_URL +# - NETDATA_TARBALL_CHECKSUM + + +# Usually stored in /etc/netdata/.environment +: "${ENVIRONMENT_FILE:=THIS_SHOULD_BE_REPLACED_BY_INSTALLER_SCRIPT}" + +# shellcheck source=/dev/null +source "${ENVIRONMENT_FILE}" || exit 1 + +if [ "${INSTALL_UID}" != "$(id -u)" ]; then + echo >&2 "You are running this script as user with uid $(id -u). We recommend to run this script as root (user with uid 0)" + exit 1 +fi + +# signal netdata to start saving its database +# this is handy if your database is big +pids=$(pidof netdata) +do_not_start= +if [ -n "${pids}" ]; then + #shellcheck disable=SC2086 + kill -USR1 ${pids} +else + # netdata is currently not running, so do not start it after updating + do_not_start="--dont-start-it" +fi + +tmp= +if [ -t 2 ]; then + # we are running on a terminal + # open fd 3 and send it to stderr + exec 3>&2 +else + # we are headless + # create a temporary file for the log + tmp=$(mktemp /tmp/netdata-updater.log.XXXXXX) + # open fd 3 and send it to tmp + exec 3>"${tmp}" +fi + +info() { + echo >&3 "$(date) : INFO: " "${@}" +} + +error() { + echo >&3 "$(date) : ERROR: " "${@}" +} + +# this is what we will do if it fails (head-less only) +failed() { + error "FAILED TO UPDATE NETDATA : ${1}" + + if [ -n "${tmp}" ]; then + cat >&2 "${tmp}" + rm "${tmp}" + fi + exit 1 +} + +update() { + [ -z "${tmp}" ] && info "Running on a terminal - (this script also supports running headless from crontab)" + + # Check if tmp is mounted as noexec + if grep -Eq '^[^ ]+ /tmp [^ ]+ ([^ ]*,)?noexec[, ]' /proc/mounts; then + pattern="/opt/netdata-updater-XXXXXX" + else + pattern="/tmp/netdata-updater-XXXXXX" + fi + + dir=$(mktemp -d "$pattern") + + cd "$dir" + + wget "${NETDATA_TARBALL_CHECKSUM_URL}" -O sha256sum.txt >&3 2>&3 + if grep "${NETDATA_TARBALL_CHECKSUM}" sha256sum.txt >&3 2>&3; then + info "Newest version is already installed" + exit 0 + fi + + wget "${NETDATA_TARBALL_URL}" -O netdata-latest.tar.gz >&3 2>&3 + if ! grep netdata-latest.tar.gz sha256sum.txt | sha256sum --check - >&3 2>&3; then + failed "Tarball checksum validation failed. Stopping netdata upgrade and leaving tarball in ${dir}" + fi + NEW_CHECKSUM="$(sha256sum netdata-latest.tar.gz 2>/dev/null| cut -d' ' -f1)" + tar -xf netdata-latest.tar.gz >&3 2>&3 + rm netdata-latest.tar.gz >&3 2>&3 + cd netdata-* + + info "Re-installing netdata..." + ${REINSTALL_COMMAND} --dont-wait ${do_not_start} >&3 2>&3 || failed "FAILED TO COMPILE/INSTALL NETDATA" + sed -i '/NETDATA_TARBALL/d' "${ENVIRONMENT_FILE}" + cat <<EOF >>"${ENVIRONMENT_FILE}" +NETDATA_TARBALL_URL="$NETDATA_TARBALL_URL" +NETDATA_TARBALL_CHECKSUM_URL="$NETDATA_TARBALL_CHECKSUM_URL" +NETDATA_TARBALL_CHECKSUM="$NEW_CHECKSUM" +EOF + + rm -rf "${dir}" >&3 2>&3 + [ -n "${tmp}" ] && rm "${tmp}" && tmp= + return 0 +} + +# the installer updates this script - so we run and exit in a single line +update && exit 0 |