Adding upstream version 2.4.47+dfsg.upstream/2.4.47+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 437 insertions, 0 deletions

diff --git a/doc/guide/release/autoconf-install.txt b/doc/guide/release/autoconf-install.txt
new file mode 100644
index 0000000..50dbe43
--- /dev/null
+++ b/doc/guide/release/autoconf-install.txt
@@ -0,0 +1,183 @@
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+
diff --git a/doc/guide/release/autoconf.sdf b/doc/guide/release/autoconf.sdf
new file mode 100644
index 0000000..008c288
--- /dev/null
+++ b/doc/guide/release/autoconf.sdf
@@ -0,0 +1,16 @@
+# $OpenLDAP$
+#
+# Generic Autoconf INSTALL
+#
+
+H1: Generic configure Instructions
+
+#!block inline
+#<FONT FACE="Courier">
+#!endblock
+
+!include "../release/autoconf-install.txt" ; verbatim
+
+#!block inline
+#</FONT>
+#!endblock
diff --git a/doc/guide/release/copyright-plain.sdf b/doc/guide/release/copyright-plain.sdf
new file mode 100644
index 0000000..4058a08
--- /dev/null
+++ b/doc/guide/release/copyright-plain.sdf
@@ -0,0 +1,10 @@
+# $OpenLDAP$
+# Copyright 1999-2018 The OpenLDAP Foundation, All Rights Reserved.
+# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
+
+#
+# Plain Copyright for Software Distribution
+#
+!define HTML_TITLE "OpenLDAP Copyright Notices"
+!include "../plain.sdf"
+!include "copyright.sdf"; plain
diff --git a/doc/guide/release/copyright.sdf b/doc/guide/release/copyright.sdf
new file mode 100644
index 0000000..618f52e
--- /dev/null
+++ b/doc/guide/release/copyright.sdf
@@ -0,0 +1,89 @@
+# $OpenLDAP$
+# Copyright 1999-2018 The OpenLDAP Foundation, All Rights Reserved.
+# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
+
+# This file should match ../../../COPYRIGHT (except in formating)
+
+!if OPT_PP_HTML
+!define	copyright '[[c]] Copyright'
+!else
+!define copyright 'Copyright'
+!endif
+
+H1: OpenLDAP Software Copyright Notices
+
+H2: OpenLDAP Copyright Notice
+
+!block nofill
+[[copyright]] 1998-2012 The OpenLDAP Foundation.
+{{All rights reserved.}}
+!endblock
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted {{only as authorized}} by the {{SECT:OpenLDAP
+Public License}}.
+
+A copy of this license is available in file {{F:LICENSE}} in the
+top-level directory of the distribution or, alternatively, at
+<{{URL:http://www.OpenLDAP.org/license.html}}>.
+
+OpenLDAP is a registered trademark of the OpenLDAP Foundation.
+
+Individual files and/or contributed packages may be copyright by
+other parties and their use subject to additional restrictions.
+
+This work is derived from the University of Michigan LDAP v3.3
+distribution.  Information concerning this software is available
+at <{{URL:http://www.umich.edu/~dirsvcs/ldap/ldap.html}}>.
+
+This work also contains materials derived from public sources.
+
+Additional information about OpenLDAP software can be obtained at
+<{{URL:http://www.OpenLDAP.org/}}>.
+
+
+H2: Additional Copyright Notices
+
+!block nofill
+Portions [[copyright]] 1998-2012 Kurt D. Zeilenga.
+Portions [[copyright]] 1998-2006 Net Boolean Incorporated.
+Portions [[copyright]] 2001-2006 IBM Corporation.
+{{All rights reserved.}}
+!endblock
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted only as authorized by the {{SECT:OpenLDAP
+Public License}}.
+
+
+!block nofill
+Portions [[copyright]] 1999-2008 Howard Y.H. Chu.
+Portions [[copyright]] 1999-2008 Symas Corporation.
+Portions [[copyright]] 1998-2003 Hallvard B. Furuseth.
+Portions [[copyright]] 2007-2011 Gavin Henry.
+Portions [[copyright]] 2007-2011 Suretec Systems Limited.
+{{All rights reserved.}}
+!endblock
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that this notice is preserved.
+The names of the copyright holders may not be used to endorse or
+promote products derived from this software without their specific
+prior written permission.  This software is provided ``as is''
+without express or implied warranty.
+
+
+H2: University of Michigan Copyright Notice
+
+!block nofill
+Portions [[copyright]] 1992-1996 Regents of the University of Michigan.
+{{All rights reserved.}}
+!endblock
+
+Redistribution and use in source and binary forms are permitted
+provided that this notice is preserved and that due credit is given
+to the University of Michigan at Ann Arbor. The name of the University
+may not be used to endorse or promote products derived from this
+software without specific prior written permission. This software
+is provided ``as is'' without express or implied warranty.
+
diff --git a/doc/guide/release/install.sdf b/doc/guide/release/install.sdf
new file mode 100644
index 0000000..d003687
--- /dev/null
+++ b/doc/guide/release/install.sdf
@@ -0,0 +1,114 @@
+# $OpenLDAP$
+# Copyright 1999-2018 The OpenLDAP Foundation, All Rights Reserved.
+# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
+
+P1: Making and Installing the OpenLDAP Distribution
+
+This file provides brief instructions on how to build and install
+OpenLDAP on UNIX (and UNIX-{{like}}) systems.  More detailed
+information and instructions can be found in
+{{The OpenLDAP Administrator's Guide}}
+(available from {{URL:http://www.openldap.org/doc/}}).
+
+It is recommended that you read, or at least skim through, ALL of
+the instructions in this file before attempting to build the
+software.
+
+It is also recommended you review
+the {{Frequently Asked Questions}} ({{URL:http://www.openldap.org/faq/}})
+pages, in particular the
+{{Installation section}} ({{URL:http://www.openldap.org/faq/index.cgi?file=8}})
+and
+{{Platform Hints}} ({{URL:http://www.openldap.org/faq/index.cgi?file=9}})
+should be examined.
+
+
+P2: Making and Installing the OpenLDAP Distribution
+
+^ Unpack the distribution and change directory:
+
+E:	% tar xfz openldap-VERSION.tgz
+E:	% cd openldap-VERSION
+
+.(replacing {{EX:VERSION}} with the appropriate version string).  If
+you are reading this file, you probably have already done this!
+
+
++ Type:
+
+E:	% ./configure --help
+
+.to list available configuration options.
+
+.The {{EX:configure}} script also looks for compiler/linker options
+on the command line and in the environment.  These include:
+
+>	Variable	Description	Example
+>	CC		C compiler	gcc
+>	CFLAGS		C flags		-O -g
+>	CPPFLAGS	cpp flags	-I/path/include -D__FOO__=42
+>	LDFLAGS		ld flags	-L/usr/local/lib
+>	LIBS		libraries	-llib
+>	PATH		command path	/usr/local/bin:/usr/bin:/bin
+
+!if $var{'OPT_TARGET'} eq 'txt'
+.See doc/install/configure for generic configure documentation.
+!endif
+
++ Configure the build system:
+
+E:	% ./configure [options] [var=value ...]
+
+.If all goes well, the {{EX:configure}} script will automatically detect
+the appropriate settings.  If the {{EX:configure}} script fails, you should
+read the {{FILE:config.log}} file that it generated to see what it was trying
+to do and exactly what failed.  You may need to specify additional
+options and/or variables besides those listed above to
+obtain desired results, depending on your operating system. The
+{{Platform Hints}} section of the {{FAQ}} provides help for operating system
+related problems.
+
++ Build dependencies:
+
+E:	% make depend
+
++ Build the system:
+
+E:	% make
+
+.If all goes well, the system will build as configured.  If not,
+return to step 3 after reviewing the configuration settings.  You
+may want to consult the {{Platform Hints}} subsection of the {{FAQ}}
+if you have not done so already.
+
++ Test the standalone system:
+
+.This step requires the standalone LDAP server, {{slapd}}(8),
+with {{HDB}} and/or {{BDB}} support.
+
+E:	% make test
+
+.If all goes well, the system has been built as configured.  If not,
+return to step 2 after reviewing your configuration settings.  You
+may want to consult the {{Installation}} section of the {{FAQ}}
+if you have not done so already.
+
++ Install the software.  You may need to become the
+{{super-user}} (e.g. {{EX:root}}) to do this (depending on where you
+are installing things):
+
+E:	% su root -c 'make install'
+
++ That's it.  Enjoy!
+
+See the {{OpenLDAP Administrator's Guide}} and the manual pages
+for the individual applications for configuration and use information.
+You may also want to edit the configuration files used by the
+various components.  These configuration files are located in
+the OpenLDAP configuration directory (normally
+{{FILE:/usr/local/etc/openldap}}).
+
+>	ldap.conf		client defaults
+>	slapd.conf		Standalone LDAP daemon
+>	schema/*.schema		Schema Definitions
+
diff --git a/doc/guide/release/license-plain.sdf b/doc/guide/release/license-plain.sdf
new file mode 100644
index 0000000..679e99e
--- /dev/null
+++ b/doc/guide/release/license-plain.sdf
@@ -0,0 +1,10 @@
+# $OpenLDAP$
+# Copyright 1999-2018 The OpenLDAP Foundation, All Rights Reserved.
+# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
+
+#
+# Plain Copyright for Software Distribution
+#
+!define HTML_TITLE "OpenLDAP Public License"
+!include "../plain.sdf"
+!include "license.sdf"; plain
diff --git a/doc/guide/release/license.sdf b/doc/guide/release/license.sdf
new file mode 100644
index 0000000..3575e6c
--- /dev/null
+++ b/doc/guide/release/license.sdf
@@ -0,0 +1,15 @@
+# $OpenLDAP$
+# Copyright 2000-2018 The OpenLDAP Foundation, All Rights Reserved.
+# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
+
+H1: OpenLDAP Public License
+
+#!block inline
+#<FONT FACE="Courier">
+#!endblock
+
+!include "../../../LICENSE" ; verbatim
+
+#!block inline
+#</FONT>
+#!endblock