14 files changed, 7236 insertions, 0 deletions
diff --git a/contrib/ldaptcl/CHANGES b/contrib/ldaptcl/CHANGES
new file mode 100644
index 0000000..09e976c
--- /dev/null
+++ b/contrib/ldaptcl/CHANGES
@@ -0,0 +1,30 @@
+Package rersion 2.0:
+- Detects OpenLDAP 2.0 and builds correctly with it.
+- Increment major version to 2, library file to libldaptcl2.0.so.
+- Can now perform add/delete/replace modifications in a single command.
+- Replaced calls to TclX_WrongArgs with core Tcl_WrongNumArgs to reduce
+  dependency on Extended Tcl.
+- Wrap dereference search control with #ifdef LDAP_OPT_DEREF.
+- Deref during search should work.
+- Add protocol_version option to ldap init command.
+- Add LDAPTCL_PROTOCOL_VERSION_DEFAULT to allow specifying the default
+  protocol version used.
+- Add controlArray(timeout) to control timeouts during searches.
+- Add controlArray(cache) to control caching current search results.
+  (Experience has shown this to be not very useful or not working correctly.
+  Caching search results should probably be done in Ldaptcl rather than
+  letting the LDAP API do it.)
+- Add "compare" subcommand
+- Add experimental trap subcommand (undocumented -- use at your own risk).
+
+Package version 1.2:
+
+- Filter no longer a required controlArray member, defaults to objectclass=*.
+- Sets errorCode with LDAP macro string value (better to test than the more
+  human readable values).
+- Shorten minimum required characters for search scope definitions: now allows
+  "base", "one", and "sub".  For the latter two, additional characters are
+  ignored.
+- Now compiles successfully with -devel branch.
+- Client cache management code enabled for OpenLDAP versions <= 1.2.4.  (This
+  code is relatively untested and feedback is welcome.)
diff --git a/contrib/ldaptcl/COPYRIGHT b/contrib/ldaptcl/COPYRIGHT
new file mode 100644
index 0000000..c8a240d
--- /dev/null
+++ b/contrib/ldaptcl/COPYRIGHT
@@ -0,0 +1,31 @@
+Copyright 1998-2018 The OpenLDAP Foundation.  All rights reserved.
+
+COPYING RESTRICTIONS APPLY.
+
+See COPYRIGHT and LICENSE files in the top-level directory of this
+distribution (i.e., ../../COPYRIGHT and ../../LICENSE, respectively).
+
+---
+NeoSoft Tcl client extensions to Lightweight Directory Access Protocol.
+
+Copyright (c) 1998-1999 NeoSoft, Inc.  
+All Rights Reserved.
+
+This software may be used, modified, copied, distributed, and sold,
+in both source and binary form provided that these copyrights are
+retained and their terms are followed.
+
+Under no circumstances are the authors or NeoSoft Inc. responsible
+for the proper functioning of this software, nor do the authors
+assume any liability for damages incurred with its use.
+
+Redistribution and use in source and binary forms are permitted
+provided that this notice is preserved and that due credit is given
+to NeoSoft, Inc.
+
+NeoSoft, Inc. may not be used to endorse or promote products derived
+from this software without specific prior written permission. This
+software is provided ``as is'' without express or implied warranty.
+
+Requests for permission may be sent to NeoSoft Inc, 1770 St. James Place,
+Suite 500, Houston, TX, 77056.
diff --git a/contrib/ldaptcl/Makefile.in b/contrib/ldaptcl/Makefile.in
new file mode 100644
index 0000000..a66c745
--- /dev/null
+++ b/contrib/ldaptcl/Makefile.in
@@ -0,0 +1,196 @@
+#
+# This file is a Makefile for Neo, the NeoSoft extensions to Tcl.
+# If it has the name "Makefile.in" then it is a template for a
+# Makefile;  to generate the actual Makefile, run "./configure",
+# which is a configuration script generated by the "autoconf" program
+# (constructs like "@foo@" will get replaced in the actual Makefile.
+#
+
+VERSION = @NEO_VERSION@
+LIBNAME = @NEO_SHARED_LIB_FILE@
+
+# Default top-level directories in which to install architecture-
+# specific files (exec_prefix) and machine-independent files such
+# as scripts (prefix).  The values specified here may be overridden
+# at configure-time with the --exec-prefix and --prefix options
+# to the "configure" script.
+
+prefix =        @prefix@
+exec_prefix =       @exec_prefix@
+
+# The following definition can be set to non-null for special systems
+# like AFS with replication.  It allows the pathnames used for installation
+# to be different than those used for actually reference files at
+# run-time.  DESTDIR is prepended to $prefix and $exec_prefix
+# when installing files.
+DESTDIR =
+
+# Directory in which to search for tcl libraries
+NEO_LIBRARY	= $(exec_prefix)/lib/ldaptcl$(VERSION)
+
+# Directory in which to install the ldaptcl binary:
+BIN_INSTALL_DIR = $(DESTDIR)$(exec_prefix)/bin
+
+# Directory in which to install the .a or .so binary for the Neo library:
+LIB_INSTALL_DIR = $(DESTDIR)$(exec_prefix)/lib
+
+# Path to use at runtime to refer to LIB_INSTALL_DIR:
+LIB_RUNTIME_DIR =	$(exec_prefix)/lib
+
+# Top-level directory for man entries:
+MANN_INSTALL_DIR =	$(DESTDIR)$(prefix)/man/mann
+
+
+# The symbols below provide support for dynamic loading and shared
+# libraries.  The values of the symbols are normally set by the
+# configure script.  You shouldn't normally need to modify any of
+# these definitions by hand.
+
+SHLIB_CFLAGS = @NEO_SHLIB_CFLAGS@
+
+NEO_LIB_FILE = @NEO_LIB_FILE@
+
+NEO_SHARED_LIB_FILE = @NEO_SHARED_LIB_FILE@
+
+# The directory containing the Tcl sources and headers appropriate
+# for this version of Neo ("srcdir" will be replaced or has already
+# been replaced by the configure script):
+TCL_GENERIC_DIR =   @TCL_SRC_DIR@/generic
+
+# The top of the TclX directory tree
+TCLX_TOP_DIR	=	@TCLX_TOP_DIR@
+
+# The directory where tclExtend.h will be:
+TCLX_TCL_GEN_DIR =	${TCLX_TOP_DIR}/tcl/generic
+
+# The directory where tclXunixPort.h will be:
+TCLX_TCL_UNIX_DIR =	${TCLX_TOP_DIR}/tcl/unix
+
+# The path to tclX the runtcl script:
+TCLX_RUNTCL	=	${TCLX_TOP_DIR}/unix/runtcl
+
+# The directory containing the Tcl library archive file appropriate
+# for this version of Neo:
+TCL_BIN_DIR =       @TCL_BIN_DIR@
+
+
+# The symbol below provides support for dynamic loading and shared
+# libraries.  See configure.in for a description of what it means.
+# The values of the symbolis normally set by the configure script.
+
+SHLIB_LD = @SHLIB_LD@
+
+# Set to the options to include libldap.a and liblber.a 
+# (eg. -L../tools/blah -lldap -llber)
+
+LDAP_LIBFLAGS	= @ldaplibflags@
+LDAP_CFLAGS	= @ldapinclude@
+LDAP_INCDIR	= @ldapincdir@
+LDAP_BUILD	= @ldapbuild@
+LDAP_DIR	= @ldapdir@
+
+
+#----------------------------------------------------------------
+# The information below is modified by the configure script when
+# Makefile is generated from Makefile.in.  You shouldn't normally
+# modify any of this stuff by hand.
+#----------------------------------------------------------------
+
+AC_FLAGS =      @DEFS@
+INSTALL=	@INSTALL@
+INSTALL_PROGRAM =   @INSTALL_PROGRAM@
+INSTALL_DATA =      @INSTALL_DATA@
+RANLIB =        @RANLIB@
+SRC_DIR =       @srcdir@/..
+TOP_DIR =       @srcdir@/..
+GENERIC_DIR =       $(TOP_DIR)/generic
+
+#----------------------------------------------------------------
+# The information below should be usable as is.  The configure
+# script won't modify it and you shouldn't need to modify it
+# either.
+#----------------------------------------------------------------
+
+
+OBJS= neoXldap.o
+
+LIBDIR=$(exec_prefix)/lib
+INCDIR=$(prefix)/include
+
+LIBS= @LIBS@ @TCLX_LIB_SPEC@ @TCL_LIB_SPEC@ @TCL_LIBS@ $(LDAP_LIBFLAGS) -lc
+TK_LIBS=@TKX_LIB_SPEC@ @TK_LIB_SPEC@ @TK_LIBS@
+TK_VERSION=@TK_VERSION@
+
+CC =        @CC@
+CC_SWITCHES =   ${CFLAGS} @NEO_SHLIB_CFLAGS@ -I. \
+-I@prefix@/include ${AC_FLAGS} ${PROTO_FLAGS} \
+${SECURITY_FLAGS} ${MEM_DEBUG_FLAGS} ${KEYSYM_FLAGS} \
+-DNEO_LIBRARY=\"${NEO_LIBRARY}\" -DVERSION=\"${VERSION}\" 
+
+TK_SWITCHES = ${CC_SWITCHES} @TK_XINCLUDES@
+
+.c.o:
+	$(CC) -c $(CC_SWITCHES) $<
+
+all:	@NEO_LIB_FILE@ ldaptclsh @LDAPWISH@
+
+@NEO_LIB_FILE@:	$(OBJS)
+	rm -f @NEO_LIB_FILE@
+	@MAKE_LIB@
+	$(RANLIB) @NEO_LIB_FILE@
+
+neoXldap.o: neoXldap.c ldaptclerr.h
+	$(CC) -c $(LDAP_CFLAGS) $(CC_SWITCHES) neoXldap.c
+
+ldaptclerr.h: ldaperr.tcl
+	tcl ldaperr.tcl $(LDAP_INCDIR)/ldap.h > ldaptclerr.h
+
+
+clean:
+	-rm -f ldaptclsh ldapwish
+	-rm -f *.o *.a *.so*
+
+distclean: clean
+	rm -f Makefile pkgIndex.tcl config.cache config.log config.status \
+		ldaptclerr.h
+
+install: install-binaries install-man
+
+install-binaries: @NEO_LIB_FILE@ ldaptclsh @LDAPWISH@
+	@-mkdir -p $(BIN_INSTALL_DIR)
+	$(INSTALL_PROGRAM) ldaptclsh $(BIN_INSTALL_DIR)/ldaptclsh
+	@if [ -n "@LDAPWISH@" ] ; then \
+	    echo $(INSTALL_PROGRAM) ldapwish $(BIN_INSTALL_DIR)/ldapwish; \
+	    $(INSTALL_PROGRAM) ldapwish $(BIN_INSTALL_DIR)/ldapwish; \
+	fi
+	$(INSTALL_DATA) @NEO_LIB_FILE@ $(LIB_INSTALL_DIR)
+	@if [ "$(NEO_LIB_FILE)" = "$(NEO_SHARED_LIB_FILE)" ] ; then \
+		echo Installing pkgIndex.tcl in $(NEO_LIBRARY); \
+		mkdir -p $(NEO_LIBRARY); \
+		$(INSTALL_DATA) pkgIndex.tcl $(NEO_LIBRARY); \
+	fi
+
+
+install-man:
+	@for i in ldap.n; \
+	    do \
+	    echo "Installing $$i"; \
+	    rm -f $(MANN_INSTALL_DIR)/$$i; \
+	    sed -e '/man\.macros/r man.macros' -e '/man\.macros/d' \
+		    $$i > $(MANN_INSTALL_DIR)/$$i; \
+	    chmod 444 $(MANN_INSTALL_DIR)/$$i; \
+	done;
+
+
+TCLOFILES= tclAppInit.o
+
+ldaptclsh:$(TCLOFILES) @NEO_LIB_FILE@
+	$(CC) @LD_FLAGS@ $(TCLOFILES) @NEO_BUILD_LIB_SPEC@ $(LIBS) \
+	@TCL_LD_SEARCH_FLAGS@ -o ldaptclsh
+
+tkAppInit.o: tkAppInit.c
+	$(CC) -c ${TK_SWITCHES} tkAppInit.c
+
+ldapwish:tkAppInit.o @NEO_LIB_FILE@
+	$(CC) @LD_FLAGS@ tkAppInit.o @NEO_BUILD_LIB_SPEC@ $(TK_LIBS) $(LIBS) \
+	@TCL_LD_SEARCH_FLAGS@ -o ldapwish
diff --git a/contrib/ldaptcl/README b/contrib/ldaptcl/README
new file mode 100644
index 0000000..0928d5f
--- /dev/null
+++ b/contrib/ldaptcl/README
@@ -0,0 +1,67 @@
+Copyright (c) 1998-1999 NeoSoft, Inc.
+
+For licensing information, see the file neoXldap.c and/or the COPYRIGHT
+file contained in the directory you found this file.
+
+This directory contains an extension to Tcl to interface with an
+LDAP server.  While this software is being released to the OpenLDAP
+community, it is the authors' intention that support continue (and
+be added) for other client libraries as well.  As time goes on, it
+is expected that code will converge rather than diverge.
+
+Support is provided for University of Michigan LDAP version 3.3,
+OpenLDAP, and Netscape.  The default configuration supports
+OpenLDAP 1.2.4 and above.
+
+OpenLDAP 2.x is supported, but there is not yet any support for
+using SASL or TLS.  There may be interface changes in the LDAP API
+which the author is unaware of (a leak was recently fixed for the
+return values of ldap_first/next_attribute() calls).
+
+It uses GNU autoconf.  It builds and installs without requiring
+parallel directories, but it does require that Tcl and Extended Tcl
+are installed in the directory pointed to by --prefix (/usr/local
+by default).
+
+For further info, try "./configure --help".
+
+For example, I run:
+
+    ./configure  --prefix=/opt/neotcl --enable-shared \
+	--with-ldap=/usr/local/ldap
+
+Remember that --prefix must be the same prefix used when building
+and installint Tcl.
+
+Netscape configuration has not been well tested, and you may have to
+play with the resulting Makefile to get it to work.  In particular,
+you will probably need to modify the LDAP_LIBFLAGS.  However, the
+C code itself is reasonably well tested with Netscape.
+
+This module will install a regular shell (ldaptclsh) a windowing
+shell (ldapwish) a library, a pkgIndex.tcl, and a manpage (ldap.n).
+
+If your Tcl installation has been configured with --enable-shared,
+then you must also use --enable-shared here.
+
+Shared libraries and Tcl packages.
+
+If Tcl is built with --enable-shared, AND OpenLDAP (or another version
+for that matter) has been build to create -llber and -lldap as shared
+libaries, AND you build ldaptcl with --enable-shared, it should be
+possible to run a plain Tcl interpreter (eg. tclsh8.0) and do
+
+		package require Ldaptcl
+
+which will install the "ldap" command into the interpreter.
+
+You may need to set the LD_LIBRARY_PATH environment variable appropriately,
+or use -R or -W,-rpath ld command options to resolve the search for ldap
+and lber libraries.
+
+This package was test built on a Alpha OSF4.0e with the native C
+compiler.
+
+Please email comments or bug fixes to openldap-devel@OpenLDAP.org,
+or to kunkee@OpenLDAP.org.  I would also like to know if you are
+using this interface, so I invite you to drop me an email if you do.
diff --git a/contrib/ldaptcl/configure b/contrib/ldaptcl/configure
new file mode 100755
index 0000000..890b4fd
--- /dev/null
+++ b/contrib/ldaptcl/configure
@@ -0,0 +1,4159 @@
+#! /bin/sh
+# From configure.in Id: 16b135293616700c63077e9a1a601681d4442fdd .
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.65.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+PACKAGE_URL=
+
+ac_unique_file="neoXldap.c"
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+NEO_VERSION
+NEO_SHLIB_CFLAGS
+NEO_MINOR_VERSION
+NEO_MAJOR_VERSION
+NEO_LIB_SPEC
+NEO_LIB_FILE
+NEO_UNSHARED_LIB_FILE
+NEO_SHARED_LIB_FILE
+NEO_LD_SEARCH_FLAGS
+NEO_BUILD_LIB_SPEC
+TCL_VERSION
+TCL_LIB_HNAME
+TCL_LD_SEARCH_FLAGS
+TCL_LIB_SPEC
+TCL_BIN_DIR
+TCL_SRC_DIR
+TCL_LIBS
+ITCL_LIB_SPEC
+TCLX_LIB_SPEC
+TCLX_TCL_DIR
+TCLX_TOP_DIR
+SHLIB_VERSION
+SHLIB_SUFFIX
+SHLIB_LD_LIBS
+SHLIB_LD
+SHLIB_CFLAGS
+MAKE_LIB
+MATH_LIBS
+LD_FLAGS
+DL_LIBS
+ldapincdir
+ldapdir
+ldapbuild
+ldapinclude
+ldaplibflags
+LDAPWISH
+TKX_LIB_SPEC
+TK_VERSION
+TK_XINCLUDES
+TK_LIB_SPEC
+TK_LIBS
+RANLIB
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_gcc
+with_tk
+with_x
+enable_shared
+with_ldap
+with_ldap_incdir
+with_ldap_libdir
+with_ldap_libraries
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-gcc            allow use of gcc if available
+  --enable-shared         build libldaptcl as a shared library
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-tk=DIR          use Tk 8.0 binaries from DIR
+  --without-x            do not build/install ldapwish
+  --with-ldap=<dir>           common parent of ldap include and lib dirs
+  --with-ldap-incdir=<dir>    path to ldap.h
+  --with-ldap-libdir=<dir>    path to ldap and lber libs
+  --with-ldap-libflags=<libnames>   -l flags for ldap libraries
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.65
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.65.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# $OpenLDAP$
+
+
+
+NEO_VERSION=2.0
+NEO_MAJOR_VERSION=2
+NEO_MINOR_VERSION=0
+VERSION=${NEO_VERSION}
+
+if test "${prefix}" = "NONE"; then
+    prefix=/usr/local
+fi
+if test "${exec_prefix}" = "NONE"; then
+    exec_prefix=$prefix
+fi
+
+# Check whether --enable-gcc was given.
+if test "${enable_gcc+set}" = set; then :
+  enableval=$enable_gcc; neo_ok=$enableval
+else
+  neo_ok=no
+fi
+
+if test "$neo_ok" = "yes"; then
+    ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+else
+    CC=${CC-cc}
+
+fi
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  for ac_t in install-sh install.sh shtool; do
+    if test -f "$ac_dir/$ac_t"; then
+      ac_aux_dir=$ac_dir
+      ac_install_sh="$ac_aux_dir/$ac_t -c"
+      break 2
+    fi
+  done
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+if test ! -f $exec_prefix/lib/tclConfig.sh
+then
+    as_fn_error "Tcl must be installed first" "$LINENO" 5
+fi
+
+. $exec_prefix/lib/tclConfig.sh
+
+if test ! -f $exec_prefix/lib/tclxConfig.sh
+then
+    as_fn_error "Extended Tcl must be installed first" "$LINENO" 5
+fi
+. $exec_prefix/lib/tclxConfig.sh
+
+
+#--------------------------------------------------------------------
+#	See if there was a command-line option for where Tk is;  if
+#	not, assume that its top-level directory is a sibling of ours.
+#--------------------------------------------------------------------
+
+
+# Check whether --with-tk was given.
+if test "${with_tk+set}" = set; then :
+  withval=$with_tk;
+else
+  with_tk=yes
+fi
+
+
+case "$with_tk" in
+    yes)
+	if test -f $exec_prefix/lib/tkConfig.sh &&
+	   test -f $exec_prefix/lib/tkxConfig.sh
+	then
+	    :
+	else
+	    as_fn_error "Tk does not appear to be installed at $exec_prefix" "$LINENO" 5
+	fi
+	;;
+    no) ;;
+    *)  as_fn_error "Tk cannot be specified and must be in $exec_prefix" "$LINENO" 5
+	;;
+esac
+
+
+# Check whether --with-x was given.
+if test "${with_x+set}" = set; then :
+  withval=$with_x;
+fi
+
+if test "$with_x" = "no"
+then
+    with_tk=no
+fi
+
+if test "$with_tk" != "no"
+then
+    LDAPWISH=ldapwish
+    . $exec_prefix/lib/tkConfig.sh
+    . $exec_prefix/lib/tkxConfig.sh
+fi
+
+
+
+
+
+
+
+#--------------------------------------------------------------------
+#	Read in configuration information generated by Tcl for shared
+#	libraries, and arrange for it to be substituted into our
+#	Makefile.
+#--------------------------------------------------------------------
+
+CC=$TCL_CC
+SHLIB_CFLAGS=$TCL_SHLIB_CFLAGS
+SHLIB_LD=$TCL_SHLIB_LD
+SHLIB_LD_LIBS=$TCL_SHLIB_LD_LIBS
+SHLIB_SUFFIX=$TCL_SHLIB_SUFFIX
+SHLIB_VERSION=$TCL_SHLIB_VERSION
+DL_LIBS=$TCL_DL_LIBS
+LD_FLAGS=$TCL_LD_FLAGS
+NEO_LD_SEARCH_FLAGS=$TCL_LD_SEARCH_FLAGS
+
+eval "NEO_SHARED_LIB_FILE=libldaptcl${TCL_SHARED_LIB_SUFFIX}"
+eval "NEO_UNSHARED_LIB_FILE=libldaptcl${TCL_UNSHARED_LIB_SUFFIX}"
+
+#--------------------------------------------------------------------
+#	The statements below define a collection of symbols related to
+#	building libldap as a shared library instead of a static library.
+#--------------------------------------------------------------------
+
+# Warning: in order to use the following code for libldap and libdb versions,
+# the VERSION shell variable is modified, and then is restored after.
+
+# Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; ok=$enableval
+else
+  ok=no
+fi
+
+if test "$ok" = "yes" && test "${SHLIB_SUFFIX}" != ""; then
+    NEO_SHLIB_CFLAGS="${SHLIB_CFLAGS}"
+    eval "NEO_LIB_FILE=libldaptcl${TCL_SHARED_LIB_SUFFIX}"
+    MAKE_LIB="\${SHLIB_LD} $TCL_LIB_HNAME -o ${NEO_LIB_FILE} \${OBJS} \${LDAP_LIBFLAGS}"
+    RANLIB=":"
+else
+    NEO_SHLIB_CFLAGS=""
+    eval "NEO_LIB_FILE=libldaptcl${TCL_UNSHARED_LIB_SUFFIX}"
+    MAKE_LIB="ar cr ${NEO_LIB_FILE} \${OBJS}"
+fi
+
+
+# Check whether --with-ldap was given.
+if test "${with_ldap+set}" = set; then :
+  withval=$with_ldap; neo_ldap=$withval
+	case $withval in
+	    yes) ldapdir=/usr/local
+		 ;;
+	    no)  ;;
+	    *)	 ldapdir=$withval
+		 neo_ldap=yes
+		 ;;
+	esac
+
+else
+
+	    neo_ldap=yes
+	    ldapdir=/usr/local
+
+fi
+
+
+ldapincdir=$ldapdir/include
+
+# Check whether --with-ldap-incdir was given.
+if test "${with_ldap_incdir+set}" = set; then :
+  withval=$with_ldap_incdir; ldapincdir=$withval
+fi
+
+
+ldaplibdir=$ldapdir/lib
+
+# Check whether --with-ldap-libdir was given.
+if test "${with_ldap_libdir+set}" = set; then :
+  withval=$with_ldap_libdir; ldaplibdir=$withval
+fi
+
+
+
+# Check whether --with-ldap-libraries was given.
+if test "${with_ldap_libraries+set}" = set; then :
+  withval=$with_ldap_libraries; ldaplibflags="-L$ldaplibdir $withval"
+else
+  ldaplibflags="-L$ldaplibdir -lldap -llber"
+fi
+
+
+ldapinclude="-I$ldapincdir"
+
+ldapbuild=yes
+
+
+
+
+
+
+
+
+VERSION=${NEO_VERSION}
+# Note:  in the following variable, it's important to use the absolute
+# path name of the Tcl directory rather than "..":  this is because
+# AIX remembers this path and will attempt to use it at run-time to look
+# up the Tcl library.
+
+if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
+    NEO_BUILD_LIB_SPEC="-L`pwd` -lldaptcl${VERSION}"
+    NEO_LIB_SPEC="-L${exec_prefix}/lib -lldaptcl${VERSION}"
+else
+    NEO_BUILD_LIB_SPEC="-L`pwd` -lldaptcl`echo ${VERSION} | tr -d .`"
+    NEO_LIB_SPEC="-L${exec_prefix}/lib -lldaptcl`echo ${VERSION} | tr -d .`"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_config_files="$ac_config_files Makefile pkgIndex.tcl"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+    cat confcache >$cache_file
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.65.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.65,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "pkgIndex.tcl") CONFIG_FILES="$CONFIG_FILES pkgIndex.tcl" ;;
+
+  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+
+  esac
+
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit $?
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/contrib/ldaptcl/configure.in b/contrib/ldaptcl/configure.in
new file mode 100644
index 0000000..f62975d
--- /dev/null
+++ b/contrib/ldaptcl/configure.in
@@ -0,0 +1,218 @@
+dnl	This file is an input file used by the GNU "autoconf" program to
+dnl	generate the file "configure", which is run during Tk installation
+dnl	to configure the system for the local environment.
+AC_INIT(neoXldap.c)
+# $OpenLDAP$
+
+AC_REVISION([$Id: 16b135293616700c63077e9a1a601681d4442fdd $])
+
+NEO_VERSION=2.0
+NEO_MAJOR_VERSION=2
+NEO_MINOR_VERSION=0
+VERSION=${NEO_VERSION}
+
+if test "${prefix}" = "NONE"; then
+    prefix=/usr/local
+fi
+if test "${exec_prefix}" = "NONE"; then
+    exec_prefix=$prefix
+fi
+
+AC_ARG_ENABLE(gcc, [  --enable-gcc            allow use of gcc if available],
+    [neo_ok=$enableval], [neo_ok=no])
+if test "$neo_ok" = "yes"; then
+    AC_PROG_CC
+else
+    CC=${CC-cc}
+AC_SUBST(CC)
+fi
+
+AC_PROG_INSTALL(install-sh)
+AC_PROG_RANLIB
+
+if test ! -f $exec_prefix/lib/tclConfig.sh
+then
+    AC_MSG_ERROR(Tcl must be installed first)
+fi
+
+. $exec_prefix/lib/tclConfig.sh
+
+if test ! -f $exec_prefix/lib/tclxConfig.sh
+then
+    AC_MSG_ERROR(Extended Tcl must be installed first)
+fi
+. $exec_prefix/lib/tclxConfig.sh
+
+
+#--------------------------------------------------------------------
+#	See if there was a command-line option for where Tk is;  if
+#	not, assume that its top-level directory is a sibling of ours.
+#--------------------------------------------------------------------
+
+AC_ARG_WITH(tk, [  --with-tk=DIR          use Tk 8.0 binaries from DIR],
+	, with_tk=yes)
+
+case "$with_tk" in
+    yes)
+	if test -f $exec_prefix/lib/tkConfig.sh &&
+	   test -f $exec_prefix/lib/tkxConfig.sh
+	then
+	    :
+	else
+	    AC_MSG_ERROR(Tk does not appear to be installed at $exec_prefix)
+	fi
+	;;
+    no) ;;
+    *)  AC_MSG_ERROR(Tk cannot be specified and must be in $exec_prefix)
+	;;
+esac
+
+AC_ARG_WITH(x, [  --without-x            do not build/install ldapwish])
+if test "$with_x" = "no"
+then
+    with_tk=no
+fi
+
+if test "$with_tk" != "no"
+then
+    LDAPWISH=ldapwish
+    . $exec_prefix/lib/tkConfig.sh
+    . $exec_prefix/lib/tkxConfig.sh
+fi
+AC_SUBST(TK_LIBS)
+AC_SUBST(TK_LIB_SPEC)
+AC_SUBST(TK_XINCLUDES)
+AC_SUBST(TK_VERSION)
+AC_SUBST(TKX_LIB_SPEC)
+AC_SUBST(LDAPWISH)
+
+#--------------------------------------------------------------------
+#	Read in configuration information generated by Tcl for shared
+#	libraries, and arrange for it to be substituted into our
+#	Makefile.
+#--------------------------------------------------------------------
+
+CC=$TCL_CC
+SHLIB_CFLAGS=$TCL_SHLIB_CFLAGS
+SHLIB_LD=$TCL_SHLIB_LD
+SHLIB_LD_LIBS=$TCL_SHLIB_LD_LIBS
+SHLIB_SUFFIX=$TCL_SHLIB_SUFFIX
+SHLIB_VERSION=$TCL_SHLIB_VERSION
+DL_LIBS=$TCL_DL_LIBS
+LD_FLAGS=$TCL_LD_FLAGS
+NEO_LD_SEARCH_FLAGS=$TCL_LD_SEARCH_FLAGS
+
+eval "NEO_SHARED_LIB_FILE=libldaptcl${TCL_SHARED_LIB_SUFFIX}"
+eval "NEO_UNSHARED_LIB_FILE=libldaptcl${TCL_UNSHARED_LIB_SUFFIX}"
+
+#--------------------------------------------------------------------
+#	The statements below define a collection of symbols related to
+#	building libldap as a shared library instead of a static library.
+#--------------------------------------------------------------------
+
+# Warning: in order to use the following code for libldap and libdb versions,
+# the VERSION shell variable is modified, and then is restored after.
+
+AC_ARG_ENABLE(shared,
+    [  --enable-shared         build libldaptcl as a shared library],
+    [ok=$enableval], [ok=no])
+if test "$ok" = "yes" && test "${SHLIB_SUFFIX}" != ""; then
+    NEO_SHLIB_CFLAGS="${SHLIB_CFLAGS}"
+    eval "NEO_LIB_FILE=libldaptcl${TCL_SHARED_LIB_SUFFIX}"
+    MAKE_LIB="\${SHLIB_LD} $TCL_LIB_HNAME -o ${NEO_LIB_FILE} \${OBJS} \${LDAP_LIBFLAGS}"
+    RANLIB=":"
+else
+    NEO_SHLIB_CFLAGS=""
+    eval "NEO_LIB_FILE=libldaptcl${TCL_UNSHARED_LIB_SUFFIX}"
+    MAKE_LIB="ar cr ${NEO_LIB_FILE} \${OBJS}"
+fi
+
+AC_ARG_WITH(ldap, [  --with-ldap=<dir>           common parent of ldap include and lib dirs],
+	[neo_ldap=$withval
+	case $withval in
+	    yes) ldapdir=/usr/local
+		 ;;
+	    no)  ;;
+	    *)	 ldapdir=$withval
+		 neo_ldap=yes
+		 ;;
+	esac
+	], [
+	    neo_ldap=yes
+	    ldapdir=/usr/local
+	])
+
+ldapincdir=$ldapdir/include
+AC_ARG_WITH(ldap-incdir, [  --with-ldap-incdir=<dir>    path to ldap.h],
+	[ldapincdir=$withval])
+
+ldaplibdir=$ldapdir/lib
+AC_ARG_WITH(ldap-libdir, [  --with-ldap-libdir=<dir>    path to ldap and lber libs],
+	[ldaplibdir=$withval])
+
+AC_ARG_WITH(ldap-libraries, [  --with-ldap-libflags=<libnames>   -l flags for ldap libraries],
+	[ldaplibflags="-L$ldaplibdir $withval"],
+	[ldaplibflags="-L$ldaplibdir -lldap -llber"])
+
+ldapinclude="-I$ldapincdir"
+
+ldapbuild=yes
+
+AC_SUBST(ldaplibflags)
+AC_SUBST(ldapinclude)
+AC_SUBST(ldapbuild)
+AC_SUBST(ldapdir)
+AC_SUBST(ldapincdir)
+
+
+VERSION=${NEO_VERSION}
+# Note:  in the following variable, it's important to use the absolute
+# path name of the Tcl directory rather than "..":  this is because
+# AIX remembers this path and will attempt to use it at run-time to look
+# up the Tcl library.
+
+if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
+    NEO_BUILD_LIB_SPEC="-L`pwd` -lldaptcl${VERSION}"
+    NEO_LIB_SPEC="-L${exec_prefix}/lib -lldaptcl${VERSION}"
+else
+    NEO_BUILD_LIB_SPEC="-L`pwd` -lldaptcl`echo ${VERSION} | tr -d .`"
+    NEO_LIB_SPEC="-L${exec_prefix}/lib -lldaptcl`echo ${VERSION} | tr -d .`"
+fi
+
+AC_SUBST(CC)
+AC_SUBST(LIBS)
+AC_SUBST(DL_LIBS)
+AC_SUBST(LD_FLAGS)
+AC_SUBST(MATH_LIBS)
+AC_SUBST(MAKE_LIB)
+AC_SUBST(SHLIB_CFLAGS)
+AC_SUBST(SHLIB_LD)
+AC_SUBST(SHLIB_LD_LIBS)
+AC_SUBST(SHLIB_SUFFIX)
+AC_SUBST(SHLIB_VERSION)
+AC_SUBST(TCLX_TOP_DIR)
+AC_SUBST(TCLX_TCL_DIR)
+AC_SUBST(TCLX_LIB_SPEC)
+AC_SUBST(ITCL_LIB_SPEC)
+AC_SUBST(TCL_LIBS)
+AC_SUBST(TCL_SRC_DIR)
+AC_SUBST(TCL_BIN_DIR)
+AC_SUBST(TCL_LIB_SPEC)
+AC_SUBST(TCL_LD_SEARCH_FLAGS)
+AC_SUBST(TCL_LIB_HNAME)
+AC_SUBST(TCL_SRC_DIR)
+AC_SUBST(TCL_VERSION)
+AC_SUBST(NEO_BUILD_LIB_SPEC)
+AC_SUBST(NEO_LD_SEARCH_FLAGS)
+AC_SUBST(NEO_SHARED_LIB_FILE)
+AC_SUBST(NEO_UNSHARED_LIB_FILE)
+AC_SUBST(NEO_LIB_FILE)
+AC_SUBST(NEO_LIB_SPEC)
+AC_SUBST(NEO_MAJOR_VERSION)
+AC_SUBST(NEO_MINOR_VERSION)
+AC_SUBST(NEO_SHLIB_CFLAGS)
+AC_SUBST(NEO_VERSION)
+dnl AC_SUBST(XINCLUDES)
+dnl AC_SUBST(XLIBSW)
+
+AC_OUTPUT(Makefile pkgIndex.tcl)
diff --git a/contrib/ldaptcl/install-sh b/contrib/ldaptcl/install-sh
new file mode 100755
index 0000000..0ff4b6a
--- /dev/null
+++ b/contrib/ldaptcl/install-sh
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+#
+# install - install a program, script, or datafile
+# This comes from X11R5; it is not part of GNU.
+#
+# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+
+instcmd="$mvprog"
+chmodcmd=""
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:  no input file specified"
+	exit 1
+fi
+
+if [ x"$dst" = x ]
+then
+	echo "install:  no destination specified"
+	exit 1
+fi
+
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+if [ -d $dst ]
+then
+	dst="$dst"/`basename $src`
+fi
+
+# Make a temp file name in the proper directory.
+
+dstdir=`dirname $dst`
+dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+$doit $instcmd $src $dsttmp
+
+# and set any options; do chmod last to preserve setuid bits
+
+if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi
+if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi
+if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi
+if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi
+
+# Now rename the file to the real destination.
+
+$doit $rmcmd $dst
+$doit $mvcmd $dsttmp $dst
+
+
+exit 0
diff --git a/contrib/ldaptcl/ldap.n b/contrib/ldaptcl/ldap.n
new file mode 100644
index 0000000..267324f
--- /dev/null
+++ b/contrib/ldaptcl/ldap.n
@@ -0,0 +1,396 @@
+'\"
+'\" Copyright (c) 1998 NeoSoft, Inc.
+'\"
+'\" See the file "license.terms" for information on usage and redistribution
+'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+'\" 
+.so man.macros
+.TH ldap n "" Ldap "Ldap Tcl Extension"
+.BS
+'\" Note:  do not modify the .SH NAME line immediately below!
+.SH NAME
+ldap \- connect to and query an LDAP server
+.SH SYNOPSIS
+\fBldap \fBopen \fR \fIcommand\fR \fIhostlist\fR
+.br
+\fBldap \fBinit \fR \fIcommand\fR \fIhostlist\fR ?protocol_version [2|3]?
+.br
+\fBldap \fBexplode ?-nonames|-list?\fR \fIdn\fR
+.br
+\fIcommand \fBsubcommand \fIoptions ...\fR
+.BE
+
+.SH OVERVIEW
+.PP
+A new command by the name of \fIcommand\fR will be created to access
+the LDAP database at \fIhostlist\fR.  \fIhostlist\fR may contain elements
+of the format \fBhost:port\fR if a port other than the default LDAP port
+of 389 is required.  The LDAP library will attempt to connect to each
+host in turn until it succeeds or exhausts the list.
+.PP
+The \fBexplode\fR form provides a means (via ldap_explode(3)) to explode a DN
+into its component parts.  \fB-nonames\fR strips off the attribute names,
+and -list returns a list suitable for \fBarray set\fR.
+.PP
+Finally, the last form, described in more detail below, refers genericly
+to how the command created by the first two examples is used.
+.SH DESCRIPTION
+
+The Lightweight Directory Access Protocol provides TCP/IP access to
+X.500 directory services and/or to a stand-alone LDAP server.
+
+This code provides a Tcl interface to the
+Lightweight Directory Access Protocol package using the Netscape
+Software Development Kit.  It can also be used with the freely
+redistributable University of 
+Michigan (http://www.umich.edu/~rsug/ldap) version by defining the
+UMICH_LDAP macro during compilation.
+
+.SH CONNECTING TO AN LDAP SERVER
+
+To create an ldap interface entity, we use the "ldap" command.
+
+    ldap open foo foo.bar.com
+
+This opens a connection to a LDAP server on foo.bar.com, and makes
+a new Tcl command, foo, through which we will manipulate the interface
+and make queries to the remote LDAP server.
+
+    ldap init foo foo.bar.com
+
+Same as above, foo is created, but for "init", opening the connection is 
+deferred until we actually try to do something.
+
+The init command also allows some optional values to be set for the connection.
+Currently, the only useful option is \fBprotocol_version\fR which take a
+single argument to specify to use LDAP protocol 2 or 3.  This may be required
+when connecting to older LDAP server.
+
+For the purposes of this example, we're going to assume that "foo" is the
+command created by opening a connection using "ldap open".
+
+.SH BINDING
+
+After a connection is made to an LDAP server, an LDAP bind operation must
+be performed before other operations can be attempted over the connection.
+
+Both simple authentication and kerberos authentication are available.
+LDAP version 3 supports many new "SSL"-style authentication and encryption
+systems, which are not currently supported by the OpenLDAP v1.2 server, and
+hence by this interface package.
+
+Currently simple and kerberos-based authentication, are supported.
+
+To use LDAP and still have reasonable security in a networked, 
+Internet/Intranet environment, secure shell can be used to setup
+secure, encrypted connections between client machines and the LDAP
+server, and between the LDAP server and any replica or slave servers
+that might be used.
+
+To perform the LDAP "bind" operation:
+
+    foo bind simple dn password
+
+    foo bind kerberos_ldap
+    foo bind kerberos_dsa
+    foo bind kerberos_both
+
+It either returns nothing (success), or a Tcl error with appropriate error
+text.
+
+For example,
+
+    foo bind simple "cn=Manager,o=NeoSoft Inc,c=us" "secret"
+
+If you attempt to bind with one of the kerberos authentication types
+described above and your LDAP library was not built with KERBEROS
+defined, you will get an unknown auth type error.
+
+To unbind an LDAP connection previously bound with "bind":
+
+    foo unbind
+
+Note that unbinding also deletes the command (\fBfoo\fR in this case).
+Deleting the command has the same affect.
+
+The ability of the library to callback to the client, enabling re-binding
+while following referrals, is not currently supported.
+
+.SH DELETING OBJECTS
+
+To delete an object in the LDAP database, use
+
+    foo delete dn
+
+To rename an object to another relative distinguished name, use
+
+    foo rename_rdn dn rdn
+
+To rename an object to another relative distinguished name, leaving
+the old entry as some kind of attribute (FIX: not sure if this is
+right or how it works)
+
+    foo modify_rdn dn rdn
+
+
+.SH ADDING NEW OBJECTS
+
+    foo add dn attributePairList
+
+This creates a new distinguished name and defines zero or more attributes.
+
+"attributePairList" is a list of key-value pairs, the same as would
+be returned by "array get" if an array had been set up containing the
+key-value pairs.
+
+    foo add "cn=karl, ou=People, o=NeoSoft Inc, c=US" {cn karl ...}
+
+Some directory servers and/or their client SDKs will automatically
+add the leaf attribute value for you.
+
+Here is a more precise description of how an attributePairList looks:
+
+    {cn {karl {Karl Lehenbauer}} telephone 713-968-5800}
+
+Note here that two cn values, "karl" and "Karl Lehenbauer", are added.
+Is it an error to write:
+
+    {cn {Karl Lehenbauer}}
+
+Which adds two cn values, "Karl" and "Lehenbauer", when the intention
+was to give a single cn value of "Karl Lehenbauer".  In real life, one
+finds oneself making prodigous use of the \fBlist\fR command rather than
+typing hard-coded lists.
+
+We have noticed that the Netscape server will automatically add the
+left-most rdn portion of the DN (ie. cn=karl), whereas the University
+of Michigan and OpenLDAP 1.2 versions do not.
+
+.SH ADDING, DELETING, AND REPLACING OBJECT ATTRIBUTES
+
+You can have multiple values for a given attribute in an LDAP object.
+These are represented in search results, through the Tcl interface,
+as a list.
+
+    foo add_attributes dn attributePairList
+
+This adds key-value pairs to an existing DN.  If an attribute being
+added already exists, the new value will be appended to the list.
+If a particular value being added to an attribute already exists in
+the object a Tcl error is raised.
+
+    foo replace_attributes dn attributePairList
+
+This replaces the specified attributes in an existing DN, leaving
+unnamed ones untouched.  Any previous values for the supplied attributes
+(if any) are discarded.
+
+    foo delete_attributes dn attributePairList
+
+This deletes attributes in the list.  If an attribute "foo" has the
+value list {bar snap}, and you delete using the attributePairList "foo bar",
+"foo" will still have "snap".
+
+If you provide an empty string ("") for the value list,
+the entire attribute will be deleted.
+
+In Ldaptcl version 2.0, multiple operations may be combined into a single
+transaction, ie. as in:
+
+    foo add_attributes dn attributePairList replace attributePairList \
+	delete attributePairList
+
+.SH SEARCHING
+
+The Tcl interface to searching takes a control array, which contains
+a couple of mandatory key-value pairs, and can contain a number of
+optional key-value pairs as well, for controlling the search, a
+destination array, into which the specified attributes (or all attributes
+of matching DNs if none are specified) and values are stored.
+
+The "code" part is executed repeatedly, once for each DN matching the
+search criteria.
+
+.nf
+    foo search controlArray destArray code
+
+	Using data in the control array, a search is performed of the
+	LDAP server opened when foo was created.  Possible elements
+	of the control array are enumerated blow.
+
+	controlArray(base) is the DN being searched from. (required)
+
+	controlArray(filter) contains the search criteria. (required)
+
+	controlArray(scope) must be "base", "one_level", or "subtree".
+	    If not specified, scope defaults to "subtree".
+
+	controlArray(deref) must be "never", "search", "find", or "always"
+	    If not specified, deref defaults to "never"
+
+	controlArray(attributes) is a list of attributes to be fetched.
+	    If not specified, all attributes are fetched.
+
+	controlArray(timeout) a timeout value in seconds (may contain
+	    fractional values -- extremely very small values are useful
+	    for forcing timeout conditions to test timeouts).
+.fi
+
+For each matching record, destArray is populated with none,
+some or all attribute-value pairs as determined by the request and
+access control lists on the server.
+
+Note:  There are some additional parameters that can be set, such as
+how long the synchronous version of the routines should wait before
+timing out, the interfaces for which are not available in the current
+version.
+
+.SH COMPARE
+
+    foo compare dn attribute value
+
+Interface to the ldap_compare_s() command.
+Compares the value of \fIattribute\fR in the object at \fIdn\fR to the
+\fIvalue\fR given in the command line.  Returns an error if \fIdn\fR
+does not exist.  Otherwise, a 
+
+.SH CACHING (Note: Netscape clients do not have caching interfaces).
+
+The UMich and OpenLDAP client libraries offers the client application fairly
+fine-grained control of caching of results retrieved from searches, 
+offering significant performance improvement and reduced
+network traffic.
+
+By default, the cache is disabled.
+
+To enable caching of data received from an LDAP connection,
+
+    foo cache enable timeout maxmem
+
+	...where timeout is specified in seconds, and maxmem is the
+	maximum memory to be used for caching, in bytes.
+
+	If maxmem is 0, the cache size is restricted only by the timeout.
+
+    foo cache disable
+
+	...temporarily inhibits use of the cache (while disabled, new requests
+	are not cached and the cache is not checked when returning results).
+
+	Disabling the cache does not delete its contents.
+
+    foo cache destroy
+
+	...turns off caching and completely removes the cache from memory.
+
+    foo cache flush
+
+	...deletes the entire cache contents, but does not affect
+	whether or not the cache is being used.
+
+    foo cache uncache dn
+
+	...removes from the cache all request results that make reference 
+	to the specified DN.
+
+	This should be used, for example, after doing an add_attributes,
+	delete_attributes, or replace_attributes (ldap_modify(3)) 
+	involving the requested DN.  Generally this should not be needed,
+	as the Tcl interface automatically performs this operation on
+	any dn that is modified (add,replace,delete) while caching is
+	enabled.
+
+    foo cache no_errors
+
+	...suppresses caching of any requests that result in an error.
+
+    foo cache size_errors
+
+	...suppresses caching of any requests that result in an error,
+	except for requests resulting in "sizelimit exceeded", which 
+	are cached.  This is the default.
+
+    foo cache all_errors
+
+        ...enables caching of all requests, including those that result
+	in errors.
+
+.SH IMPLEMENTATION DECISIONS
+
+Because we used the new "Tcl object" C interfaces, this package only works
+with Tcl 8.0 or above.
+
+This package interfaces with the University of Michigan LDAP protocol
+package, version 3.3, and OpenLDAP version 1.2, both of which are
+implementations of version 2 of the LDAP protocol.
+
+Although an LDAP client (or server) could be written in native Tcl 8.0,
+as Tcl 8.0 and above can do binary I/O, and Tcl 8 and above have strings 
+that are fully eight-bit clean, for a first implementation, to minimize 
+compatibility problems, we created a C interface to the UMich LDAP library.
+
+A native Tcl implementation would be cool because we could bring the receiving
+of messages into the normal Tcl event loop and run the LDAP interface fully
+asynchronous.
+
+This implementation is blocking, and blocking only.  That is to say that
+the Tcl event loop is frozen while the ldap routines are waiting on data.
+
+This could be fixed either by recoding all of the I/O in the LDAP library
+to use Tcl's I/O system instead, or by simply coding the LDAP interface in
+native Tcl, as mentioned above.
+
+Another advantage of coding in high-level Tcl, of course, is that the
+client would immediately be cross-platform to Windows and the Mac, as
+well as Unix.
+
+Binary data is not currently supported.  It will probably be trivial to 
+add, we just haven't dug into it yet.
+
+
+.SH FOR MORE INFORMATION
+
+This document principally describes how to use our Tcl interface to the 
+LDAP library works.
+
+For more information on LDAP and the University of Michigan LDAP package,
+please visit the website mentioned above.  The package includes substantial
+documentation in the form of UNIX manual pages, a SLAPD/SLURPD guide
+in Adobe Portable Document Format (pdf), and a number of Internet RFCs
+related to LDAP services.
+
+.SH AUTHORS
+It was written by Karl Lehenbauer, of NeoSoft, Inc., in August and
+September of 1997.  Ldap explode, and numerous bug fixes and extensions
+by Randy Kunkee, also of NeoSoft, Inc., in 1998-1999.
+
+.SH KEYWORDS
+element, join, list, separator
+.SH BUGS
+The \fBldap init\fR syntax fails to return anything useful.  Use
+\fBldap open\fR instead.
+
+\fBPackage require Ldaptcl\fR won't work unless the ldap and lber libraries
+are also shared, and ldaptcl.so is itself created with the correct flags
+(eg. -R for Solaris).  In short there's a lot of details to make this part
+work, but it should work out of the box for Solaris.  Other systems may
+require that LD_LIBRARY_PATH or other appropraite environment variables
+be set at build and/or runtime.
+
+An asynchronous interface should be provided with callbacks.
+
+We have never tested Kerberos authentication.
+
+It does not tolerate some illegal operations very well.
+
+It is possible to create empty attributes, ie. attributes which are present
+but have no value.  This is done by deleting the attribute values rather
+than, eg. "foo delete_attributes dn {telephone {}}" which would delete
+the telephone attribute altogether.  A search for presence of the attribute
+may return an object, and yet it may have no value.  This interface presents
+such an object as not having the attribute at all (ie. you cannot tell).
+The Netscape SDK does this for you, so this makes the behavior consistent
+when using UMICH_LDAP.
+
+\--enable-netscape configuration support has not been tested and probably
+has bugs.
diff --git a/contrib/ldaptcl/ldaperr.tcl b/contrib/ldaptcl/ldaperr.tcl
new file mode 100644
index 0000000..e9f8568
--- /dev/null
+++ b/contrib/ldaptcl/ldaperr.tcl
@@ -0,0 +1,54 @@
+#
+# ldaperr.tcl: scan ldap.h for error return codes for initializing
+# errorCode table.
+#
+
+proc genstrings {path} {
+    set fp [open $path]
+    while {[gets $fp line] != -1 &&
+	![string match "#define LDAP_SUCCESS*" $line]} { }
+    puts "/* This file automatically generated, hand edit at your own risk! */"
+    puts -nonewline "char *ldaptclerrorcode\[\] = {
+	NULL"
+    while {[gets $fp line] != -1} {
+	if {[clength $line] == 0 || [ctype space $line]} continue
+	if {[string match *typedef* $line]} break
+	if {![string match #define* $line]} continue
+	if {![string match "#define LDAP_*" $line]} continue
+	if {[string match "*LDAP_RANGE*" $line]} continue
+	if {[string match "*LDAP_API_RESULT*" $line]} continue
+	if {[string match {*\\} $line]} {
+	    append line [gets $fp]
+	}
+	lassign $line define macro value
+	set ldap_errcode($macro) $value
+    }
+    #parray ldap_errcode
+    foreach i [array names ldap_errcode] {
+	set value $ldap_errcode($i)
+	#puts stderr "checking $value"
+	if [regexp {^[A-Z_]} $value] {
+	    if [info exists ldap_errcode($value)] {
+		set value $ldap_errcode($value)
+		set ldap_errcode($i) $value
+	    }
+	}
+	set ldap_errname($value) $i
+    }
+    set lasterr 0
+    foreach value [lsort -integer [array names ldap_errname]] {
+	incr lasterr
+	while {$lasterr < $value} {
+	    puts -nonewline ",\n\tNULL"
+	    incr lasterr
+	}
+	puts -nonewline ",\n\t\"$ldap_errname($value)\""
+    }
+    puts "\n};"
+    puts "#define LDAPTCL_MAXERR\t$value"
+}
+
+#cmdtrace on
+if !$tcl_interactive {
+    genstrings [lindex $argv 0]
+}
diff --git a/contrib/ldaptcl/man.macros b/contrib/ldaptcl/man.macros
new file mode 100644
index 0000000..3af2da9
--- /dev/null
+++ b/contrib/ldaptcl/man.macros
@@ -0,0 +1,236 @@
+'\" The definitions below are for supplemental macros used in Tcl/Tk
+'\" manual entries.
+'\"
+'\" .AP type name in/out ?indent?
+'\"	Start paragraph describing an argument to a library procedure.
+'\"	type is type of argument (int, etc.), in/out is either "in", "out",
+'\"	or "in/out" to describe whether procedure reads or modifies arg,
+'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
+'\"	needed;  use .AS below instead)
+'\"
+'\" .AS ?type? ?name?
+'\"	Give maximum sizes of arguments for setting tab stops.  Type and
+'\"	name are examples of largest possible arguments that will be passed
+'\"	to .AP later.  If args are omitted, default tab stops are used.
+'\"
+'\" .BS
+'\"	Start box enclosure.  From here until next .BE, everything will be
+'\"	enclosed in one large box.
+'\"
+'\" .BE
+'\"	End of box enclosure.
+'\"
+'\" .CS
+'\"	Begin code excerpt.
+'\"
+'\" .CE
+'\"	End code excerpt.
+'\"
+'\" .VS ?version? ?br?
+'\"	Begin vertical sidebar, for use in marking newly-changed parts
+'\"	of man pages.  The first argument is ignored and used for recording
+'\"	the version when the .VS was added, so that the sidebars can be
+'\"	found and removed when they reach a certain age.  If another argument
+'\"	is present, then a line break is forced before starting the sidebar.
+'\"
+'\" .VE
+'\"	End of vertical sidebar.
+'\"
+'\" .DS
+'\"	Begin an indented unfilled display.
+'\"
+'\" .DE
+'\"	End of indented unfilled display.
+'\"
+'\" .SO
+'\"	Start of list of standard options for a Tk widget.  The
+'\"	options follow on successive lines, in four columns separated
+'\"	by tabs.
+'\"
+'\" .SE
+'\"	End of list of standard options for a Tk widget.
+'\"
+'\" .OP cmdName dbName dbClass
+'\"	Start of description of a specific option.  cmdName gives the
+'\"	option's name as specified in the class command, dbName gives
+'\"	the option's name in the option database, and dbClass gives
+'\"	the option's class in the option database.
+'\"
+'\" .UL arg1 arg2
+'\"	Print arg1 underlined, then print arg2 normally.
+'\"
+'\" SCCS: @(#) man.macros 1.9 97/08/22 18:50:59
+'\"
+'\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
+.if t .wh -1.3i ^B
+.nr ^l \n(.l
+.ad b
+'\"	# Start an argument description
+.de AP
+.ie !"\\$4"" .TP \\$4
+.el \{\
+.   ie !"\\$2"" .TP \\n()Cu
+.   el          .TP 15
+.\}
+.ie !"\\$3"" \{\
+.ta \\n()Au \\n()Bu
+\&\\$1	\\fI\\$2\\fP	(\\$3)
+.\".b
+.\}
+.el \{\
+.br
+.ie !"\\$2"" \{\
+\&\\$1	\\fI\\$2\\fP
+.\}
+.el \{\
+\&\\fI\\$1\\fP
+.\}
+.\}
+..
+'\"	# define tabbing values for .AP
+.de AS
+.nr )A 10n
+.if !"\\$1"" .nr )A \\w'\\$1'u+3n
+.nr )B \\n()Au+15n
+.\"
+.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
+.nr )C \\n()Bu+\\w'(in/out)'u+2n
+..
+.AS Tcl_Interp Tcl_CreateInterp in/out
+'\"	# BS - start boxed text
+'\"	# ^y = starting y location
+'\"	# ^b = 1
+.de BS
+.br
+.mk ^y
+.nr ^b 1u
+.if n .nf
+.if n .ti 0
+.if n \l'\\n(.lu\(ul'
+.if n .fi
+..
+'\"	# BE - end boxed text (draw box now)
+.de BE
+.nf
+.ti 0
+.mk ^t
+.ie n \l'\\n(^lu\(ul'
+.el \{\
+.\"	Draw four-sided box normally, but don't draw top of
+.\"	box if the box started on an earlier page.
+.ie !\\n(^b-1 \{\
+\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.el \}\
+\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.\}
+.fi
+.br
+.nr ^b 0
+..
+'\"	# VS - start vertical sidebar
+'\"	# ^Y = starting y location
+'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
+.de VS
+.if !"\\$2"" .br
+.mk ^Y
+.ie n 'mc \s12\(br\s0
+.el .nr ^v 1u
+..
+'\"	# VE - end of vertical sidebar
+.de VE
+.ie n 'mc
+.el \{\
+.ev 2
+.nf
+.ti 0
+.mk ^t
+\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
+.sp -1
+.fi
+.ev
+.\}
+.nr ^v 0
+..
+'\"	# Special macro to handle page bottom:  finish off current
+'\"	# box/sidebar if in box/sidebar mode, then invoked standard
+'\"	# page bottom macro.
+.de ^B
+.ev 2
+'ti 0
+'nf
+.mk ^t
+.if \\n(^b \{\
+.\"	Draw three-sided box if this is the box's first page,
+.\"	draw two sides but no top otherwise.
+.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.\}
+.if \\n(^v \{\
+.nr ^x \\n(^tu+1v-\\n(^Yu
+\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
+.\}
+.bp
+'fi
+.ev
+.if \\n(^b \{\
+.mk ^y
+.nr ^b 2
+.\}
+.if \\n(^v \{\
+.mk ^Y
+.\}
+..
+'\"	# DS - begin display
+.de DS
+.RS
+.nf
+.sp
+..
+'\"	# DE - end display
+.de DE
+.fi
+.RE
+.sp
+..
+'\"	# SO - start of list of standard options
+.de SO
+.SH "STANDARD OPTIONS"
+.LP
+.nf
+.ta 4c 8c 12c
+.ft B
+..
+'\"	# SE - end of list of standard options
+.de SE
+.fi
+.ft R
+.LP
+See the \\fBoptions\\fR manual entry for details on the standard options.
+..
+'\"	# OP - start of full description for a single option
+.de OP
+.LP
+.nf
+.ta 4c
+Command-Line Name:	\\fB\\$1\\fR
+Database Name:	\\fB\\$2\\fR
+Database Class:	\\fB\\$3\\fR
+.fi
+.IP
+..
+'\"	# CS - begin code excerpt
+.de CS
+.RS
+.nf
+.ta .25i .5i .75i 1i
+..
+'\"	# CE - end code excerpt
+.de CE
+.fi
+.RE
+..
+.de UL
+\\$1\l'|0\(ul'\\$2
+..
diff --git a/contrib/ldaptcl/neoXldap.c b/contrib/ldaptcl/neoXldap.c
new file mode 100644
index 0000000..b1ce03e
--- /dev/null
+++ b/contrib/ldaptcl/neoXldap.c
@@ -0,0 +1,1470 @@
+/*
+ * NeoSoft Tcl client extensions to Lightweight Directory Access Protocol.
+ * 
+ * Copyright (c) 1998-1999 NeoSoft, Inc.  
+ * All Rights Reserved.
+ * 
+ * This software may be used, modified, copied, distributed, and sold,
+ * in both source and binary form provided that these copyrights are
+ * retained and their terms are followed.
+ * 
+ * Under no circumstances are the authors or NeoSoft Inc. responsible
+ * for the proper functioning of this software, nor do the authors
+ * assume any liability for damages incurred with its use.
+ * 
+ * Redistribution and use in source and binary forms are permitted
+ * provided that this notice is preserved and that due credit is given
+ * to NeoSoft, Inc.
+ * 
+ * NeoSoft, Inc. may not be used to endorse or promote products derived
+ * from this software without specific prior written permission. This
+ * software is provided ``as is'' without express or implied warranty.
+ * 
+ * Requests for permission may be sent to NeoSoft Inc, 1770 St. James Place,
+ * Suite 500, Houston, TX, 77056.
+ *
+ * $OpenLDAP$
+ *
+ */
+
+/*
+ * This code was originally developed by Karl Lehenbauer to work with
+ * Umich-3.3 LDAP.  It was debugged against the Netscape LDAP server
+ * and their much more reliable SDK, and again backported to the
+ * Umich-3.3 client code.  The UMICH_LDAP define is used to include
+ * code that will work with the Umich-3.3 LDAP, but not with Netscape's
+ * SDK.  OpenLDAP may support some of these, but they have not been tested.
+ * Currently supported by Randy Kunkee (kunkee@OpenLDAP.org).
+ */
+
+/*
+ * Add timeout to controlArray to set timeout for ldap_result.
+ * 4/14/99 - Randy
+ */
+
+#include "tclExtend.h"
+
+#include <lber.h>
+#include <ldap.h>
+#include <string.h>
+#include <sys/time.h>
+#include <math.h>
+
+/*
+ * Macros to do string compares.  They pre-check the first character before
+ * checking of the strings are equal.
+ */
+
+#define STREQU(str1, str2) \
+	(((str1) [0] == (str2) [0]) && (strcmp (str1, str2) == 0))
+#define STRNEQU(str1, str2, n) \
+	(((str1) [0] == (str2) [0]) && (strncmp (str1, str2, n) == 0))
+
+/*
+ * The following section defines some common macros used by the rest
+ * of the code.  It's ugly, and can use some work.  This code was
+ * originally developed to work with Umich-3.3 LDAP.  It was debugged
+ * against the Netscape LDAP server and the much more reliable SDK,
+ * and then again backported to the Umich-3.3 client code.
+ */
+#define OPEN_LDAP 1
+#if defined(OPEN_LDAP)
+       /* LDAP_API_VERSION must be defined per the current draft spec
+       ** it's value will be assigned RFC number.  However, as
+       ** no RFC is defined, it's value is currently implementation
+       ** specific (though I would hope it's value is greater than 1823).
+       ** In OpenLDAP 2.x-devel, its 2000 + the draft number, ie 2002.
+       ** This section is for OPENLDAP.
+       */
+#ifndef LDAP_API_FEATURE_X_OPENLDAP
+#define ldap_memfree(p) free(p)
+#endif
+#ifdef LDAP_OPT_ERROR_NUMBER
+#define ldap_get_lderrno(ld)	(ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &lderrno), lderrno)
+#else
+#define ldap_get_lderrno(ld) (ld->ld_errno)
+#endif
+#define LDAP_ERR_STRING(ld)  \
+	ldap_err2string(ldap_get_lderrno(ld))
+#elif defined( LDAP_OPT_SIZELIMIT )
+       /*
+       ** Netscape SDK w/ ldap_set_option, ldap_get_option
+       */
+#define LDAP_ERR_STRING(ld)  \
+	ldap_err2string(ldap_get_lderrno(ldap))
+#else
+       /* U-Mich/OpenLDAP 1.x API */
+       /* RFC-1823 w/ changes */
+#define UMICH_LDAP 1
+#define ldap_memfree(p) free(p)
+#define ldap_ber_free(p, n) ber_free(p, n)
+#define ldap_value_free_len(bvals) ber_bvecfree(bvals)
+#define ldap_get_lderrno(ld) (ld->ld_errno)
+#define LDAP_ERR_STRING(ld)  \
+	ldap_err2string(ld->ld_errno)
+#endif
+
+typedef struct ldaptclobj {
+    LDAP	*ldap;
+    int		caching;	/* flag 1/0 if caching is enabled */
+    long	timeout;	/* timeout from last cache enable */
+    long	maxmem;		/* maxmem from last cache enable */
+    Tcl_Obj	*trapCmdObj;	/* error handler */
+    int		*traplist;	/* list of errorCodes to trap */
+    int		flags;
+} LDAPTCL;
+
+
+#define LDAPTCL_INTERRCODES	0x001
+
+#include "ldaptclerr.h"
+
+static
+LDAP_SetErrorCode(LDAPTCL *ldaptcl, int code, Tcl_Interp *interp)
+{
+    char shortbuf[16];
+    char *errp;
+    int   lderrno;
+
+    if (code == -1)
+	code = ldap_get_lderrno(ldaptcl->ldap);
+    if ((ldaptcl->flags & LDAPTCL_INTERRCODES) || code > LDAPTCL_MAXERR ||
+      ldaptclerrorcode[code] == NULL) {
+	sprintf(shortbuf, "0x%03x", code);
+	errp = shortbuf;
+    } else
+	errp = ldaptclerrorcode[code];
+
+    Tcl_SetErrorCode(interp, errp, NULL);
+    if (ldaptcl->trapCmdObj) {
+	int *i;
+	Tcl_Obj *cmdObj;
+	if (ldaptcl->traplist != NULL) {
+	    for (i = ldaptcl->traplist; *i && *i != code; i++)
+		;
+	    if (*i == 0) return;
+	}
+	(void) Tcl_EvalObj(interp, ldaptcl->trapCmdObj);
+    }
+}
+
+static
+LDAP_ErrorStringToCode(Tcl_Interp *interp, char *s)
+{
+    int offset;
+    int code;
+
+    offset = (strncasecmp(s, "LDAP_", 5) == 0) ? 0 : 5;
+    for (code = 0; code < LDAPTCL_MAXERR; code++) {
+	if (!ldaptclerrorcode[code]) continue;
+	if (strcasecmp(s, ldaptclerrorcode[code]+offset) == 0)
+	    return code;
+    }
+    Tcl_ResetResult(interp);
+    Tcl_AppendResult(interp, s, " is an invalid code", (char *) NULL);
+    return -1;
+}
+
+/*-----------------------------------------------------------------------------
+ * LDAP_ProcessOneSearchResult --
+ * 
+ *   Process one result return from an LDAP search.
+ *
+ * Paramaters:
+ *   o interp -            Tcl interpreter; Errors are returned in result.
+ *   o ldap -              LDAP structure pointer.
+ *   o entry -             LDAP message pointer.
+ *   o destArrayNameObj -  Name of Tcl array in which to store attributes.
+ *   o evalCodeObj -       Tcl_Obj pointer to code to eval against this result.
+ * Returns:
+ *   o TCL_OK if processing succeeded..
+ *   o TCL_ERROR if an error occured, with error message in interp.
+ *-----------------------------------------------------------------------------
+ */
+int
+LDAP_ProcessOneSearchResult (interp, ldap, entry, destArrayNameObj, evalCodeObj)
+    Tcl_Interp     *interp;
+    LDAP           *ldap;
+    LDAPMessage    *entry;
+    Tcl_Obj        *destArrayNameObj;
+    Tcl_Obj        *evalCodeObj;
+{
+    char           *attributeName;
+    Tcl_Obj        *attributeNameObj;
+    Tcl_Obj        *attributeDataObj;
+    int             i; 
+    BerElement     *ber; 
+    struct berval **bvals;
+    char	   *dn;
+    int		    lderrno;
+
+    Tcl_UnsetVar (interp, Tcl_GetStringFromObj (destArrayNameObj, NULL), 0);
+
+    dn = ldap_get_dn(ldap, entry);
+    if (dn != NULL) {
+	if (Tcl_SetVar2(interp,		/* set dn */
+		       Tcl_GetStringFromObj(destArrayNameObj, NULL),
+		       "dn",
+		       dn,
+		       TCL_LEAVE_ERR_MSG) == NULL)
+	    return TCL_ERROR;
+	ldap_memfree(dn);
+    }
+    attributeNameObj = Tcl_NewObj();
+    Tcl_IncrRefCount (attributeNameObj);
+
+    /* Note that attributeName below is allocated for OL2+ libldap, so it
+       must be freed with ldap_memfree().  Test below is admittedly a hack.
+    */
+
+    for (attributeName = ldap_first_attribute (ldap, entry, &ber); 
+      attributeName != NULL;
+      attributeName = ldap_next_attribute(ldap, entry, ber)) {
+
+	bvals = ldap_get_values_len(ldap, entry, attributeName);
+
+	if (bvals != NULL) {
+	    /* Note here that the U.of.M. ldap will return a null bvals
+	       when the last attribute value has been deleted, but still
+	       retains the attributeName.  Even though this is documented
+	       as an error, we ignore it to present a consistent interface
+	       with Netscape's server
+	    */
+	    attributeDataObj = Tcl_NewObj();
+	    Tcl_SetStringObj(attributeNameObj, attributeName, -1);
+#if LDAP_API_VERSION >= 2004
+	    ldap_memfree(attributeName);	/* free if newer API */
+#endif
+	    for (i = 0; bvals[i] != NULL; i++) {
+		Tcl_Obj *singleAttributeValueObj;
+
+		singleAttributeValueObj = Tcl_NewStringObj(bvals[i]->bv_val, bvals[i]->bv_len);
+		if (Tcl_ListObjAppendElement (interp, 
+					      attributeDataObj, 
+					      singleAttributeValueObj) 
+		  == TCL_ERROR) {
+		    ber_free(ber, 0);
+		    return TCL_ERROR;
+		}
+	    }
+
+	    ldap_value_free_len(bvals);
+
+	    if (Tcl_ObjSetVar2 (interp, 
+				destArrayNameObj,
+				attributeNameObj,
+				attributeDataObj,
+				TCL_LEAVE_ERR_MSG) == NULL) {
+		return TCL_ERROR;
+	    }
+	}
+    }
+    Tcl_DecrRefCount (attributeNameObj);
+    return Tcl_EvalObj (interp, evalCodeObj);
+}
+
+/*-----------------------------------------------------------------------------
+ * LDAP_PerformSearch --
+ * 
+ *   Perform an LDAP search.
+ *
+ * Paramaters:
+ *   o interp -            Tcl interpreter; Errors are returned in result.
+ *   o ldap -              LDAP structure pointer.
+ *   o base -              Base DN from which to perform search.
+ *   o scope -             LDAP search scope, must be one of LDAP_SCOPE_BASE,
+ *                         LDAP_SCOPE_ONELEVEL, or LDAP_SCOPE_SUBTREE.
+ *   o attrs -             Pointer to array of char * pointers of desired
+ *                         attribute names, or NULL for all attributes.
+ *   o filtpatt            LDAP filter pattern.
+ *   o value               Value to get sprintf'ed into filter pattern.
+ *   o destArrayNameObj -  Name of Tcl array in which to store attributes.
+ *   o evalCodeObj -       Tcl_Obj pointer to code to eval against this result.
+ * Returns:
+ *   o TCL_OK if processing succeeded..
+ *   o TCL_ERROR if an error occured, with error message in interp.
+ *-----------------------------------------------------------------------------
+ */
+int 
+LDAP_PerformSearch (interp, ldaptcl, base, scope, attrs, filtpatt, value,
+	destArrayNameObj, evalCodeObj, timeout_p, all, sortattr)
+    Tcl_Interp     *interp;
+    LDAPTCL        *ldaptcl;
+    char           *base;
+    int             scope;
+    char          **attrs;
+    char           *filtpatt;
+    char           *value;
+    Tcl_Obj        *destArrayNameObj;
+    Tcl_Obj        *evalCodeObj;
+    struct timeval *timeout_p;
+    int		    all;
+    char	   *sortattr;
+{
+    LDAP	 *ldap = ldaptcl->ldap;
+    char          filter[BUFSIZ];
+    int           resultCode;
+    int           errorCode;
+    int		  abandon;
+    int		  tclResult = TCL_OK;
+    int		  msgid;
+    LDAPMessage  *resultMessage = 0;
+    LDAPMessage  *entryMessage = 0;
+    char	  *sortKey;
+
+    int		  lderrno;
+
+    sprintf(filter, filtpatt, value);
+
+    fflush(stderr);
+    if ((msgid = ldap_search (ldap, base, scope, filter, attrs, 0)) == -1) {
+	Tcl_AppendResult (interp,
+			        "LDAP start search error: ",
+					LDAP_ERR_STRING(ldap),
+			        (char *)NULL);
+	LDAP_SetErrorCode(ldaptcl, -1, interp);
+	return TCL_ERROR;
+    }
+
+    abandon = 0;
+    if (sortattr)
+	all = 1;
+    tclResult = TCL_OK;
+    while (!abandon) {
+	resultCode = ldap_result (ldap, msgid, all, timeout_p, &resultMessage);
+	if (resultCode != LDAP_RES_SEARCH_RESULT &&
+	    resultCode != LDAP_RES_SEARCH_ENTRY)
+		break;
+
+	if (sortattr) {
+	    sortKey = (strcasecmp(sortattr, "dn") == 0) ? NULL : sortattr;
+	    ldap_sort_entries(ldap, &resultMessage, sortKey, strcasecmp);
+	}
+	entryMessage = ldap_first_entry(ldap, resultMessage);
+
+	while (entryMessage) {
+	    tclResult = LDAP_ProcessOneSearchResult  (interp, 
+				    ldap, 
+				    entryMessage,
+				    destArrayNameObj,
+				    evalCodeObj);
+	    if (tclResult != TCL_OK) {
+		if (tclResult == TCL_CONTINUE) {
+		    tclResult = TCL_OK;
+		} else if (tclResult == TCL_BREAK) {
+		    tclResult = TCL_OK;
+		    abandon = 1;
+		    break;
+		} else if (tclResult == TCL_ERROR) {
+		    char msg[100];
+		    sprintf(msg, "\n    (\"search\" body line %d)",
+			    interp->errorLine);
+		    Tcl_AddObjErrorInfo(interp, msg, -1);
+		    abandon = 1;
+		    break;
+		} else {
+		    abandon = 1;
+		    break;
+		}
+	    }
+	    entryMessage = ldap_next_entry(ldap, entryMessage);
+	}
+	if (resultCode == LDAP_RES_SEARCH_RESULT || all)
+	    break;
+	if (resultMessage)
+ 	ldap_msgfree(resultMessage);
+	resultMessage = NULL;
+    }
+    if (abandon) {
+	if (resultMessage)
+	    ldap_msgfree(resultMessage);
+	if (resultCode == LDAP_RES_SEARCH_ENTRY)
+	    ldap_abandon(ldap, msgid);
+	return tclResult;
+    }
+    if (resultCode == -1) {
+	Tcl_ResetResult (interp);
+	Tcl_AppendResult (interp,
+				"LDAP result search error: ",
+				LDAP_ERR_STRING(ldap),
+				(char *)NULL);
+	LDAP_SetErrorCode(ldaptcl, -1, interp);
+	return TCL_ERROR;
+    }
+
+    if ((errorCode = ldap_result2error (ldap, resultMessage, 0))
+      != LDAP_SUCCESS) {
+      Tcl_ResetResult (interp);
+      Tcl_AppendResult (interp,
+			      "LDAP search error: ",
+			      ldap_err2string(errorCode),
+			      (char *)NULL);
+      if (resultMessage)
+	  ldap_msgfree(resultMessage);
+      LDAP_SetErrorCode(ldaptcl, errorCode, interp);
+      return TCL_ERROR;
+    }
+    if (resultMessage)
+	ldap_msgfree(resultMessage);
+    return tclResult;
+}
+
+/*-----------------------------------------------------------------------------
+ * NeoX_LdapTargetObjCmd --
+ *  
+ * Implements the body of commands created by Neo_LdapObjCmd.
+ *  
+ * Results:
+ *      A standard Tcl result.
+ *      
+ * Side effects:
+ *      See the user documentation.
+ *-----------------------------------------------------------------------------
+ */     
+int
+NeoX_LdapTargetObjCmd (clientData, interp, objc, objv)
+    ClientData    clientData;
+    Tcl_Interp   *interp;
+    int           objc;
+    Tcl_Obj      *CONST objv[];
+{
+    char         *command;
+    char         *subCommand;
+    LDAPTCL      *ldaptcl = (LDAPTCL *)clientData;
+    LDAP         *ldap = ldaptcl->ldap;
+    char         *dn;
+    int           is_add = 0;
+    int           is_add_or_modify = 0;
+    int           mod_op = 0;
+    char	 *m, *s, *errmsg;
+    int		 errcode;
+    int		 tclResult;
+    int		 lderrno;	/* might be used by LDAP_ERR_STRING macro */
+
+    Tcl_Obj      *resultObj = Tcl_GetObjResult (interp);
+
+    if (objc < 2) {
+	Tcl_WrongNumArgs (interp, 1, objv, "subcommand [args...]");
+	return TCL_ERROR;
+    }
+
+    command = Tcl_GetStringFromObj (objv[0], NULL);
+    subCommand = Tcl_GetStringFromObj (objv[1], NULL);
+
+    /* object bind authtype name password */
+    if (STREQU (subCommand, "bind")) {
+	char     *binddn;
+	char     *passwd;
+	int       stringLength;
+	char     *ldap_authString;
+	int       ldap_authInt;
+
+	if (objc != 5) {
+	    Tcl_WrongNumArgs (interp, 2, objv, "authtype dn passwd");
+	    return TCL_ERROR;
+	}
+
+	ldap_authString = Tcl_GetStringFromObj (objv[2], NULL);
+
+	if (STREQU (ldap_authString, "simple")) {
+	    ldap_authInt = LDAP_AUTH_SIMPLE;
+	}
+#ifdef UMICH_LDAP
+	else if (STREQU (ldap_authString, "kerberos_ldap")) {
+	    ldap_authInt = LDAP_AUTH_KRBV41;
+	} else if (STREQU (ldap_authString, "kerberos_dsa")) {
+	    ldap_authInt = LDAP_AUTH_KRBV42;
+	} else if (STREQU (ldap_authString, "kerberos_both")) {
+	    ldap_authInt = LDAP_AUTH_KRBV4;
+	}
+#endif
+	else {
+	    Tcl_AppendStringsToObj (resultObj,
+				    "\"",
+				    command,
+				    " ",
+				    subCommand, 
+#ifdef UMICH_LDAP
+				    "\" authtype must be one of \"simple\", ",
+				    "\"kerberos_ldap\", \"kerberos_dsa\" ",
+				    "or \"kerberos_both\"",
+#else
+				    "\" authtype must be \"simple\", ",
+#endif
+				    (char *)NULL);
+	    return TCL_ERROR;
+	}
+
+	binddn = Tcl_GetStringFromObj (objv[3], &stringLength);
+	if (stringLength == 0)
+	    binddn = NULL;
+
+	passwd = Tcl_GetStringFromObj (objv[4], &stringLength);
+	if (stringLength == 0)
+	    passwd = NULL;
+
+/*  ldap_bind_s(ldap, dn, pw, method) */
+
+#ifdef UMICH_LDAP
+#define LDAP_BIND(ldap, dn, pw, method) \
+  ldap_bind_s(ldap, dn, pw, method)
+#else
+#define LDAP_BIND(ldap, dn, pw, method) \
+  ldap_simple_bind_s(ldap, dn, pw)
+#endif
+	if ((errcode = LDAP_BIND (ldap, 
+			 binddn, 
+			 passwd, 
+			 ldap_authInt)) != LDAP_SUCCESS) {
+
+	    Tcl_AppendStringsToObj (resultObj,
+			            "LDAP bind error: ",
+				    ldap_err2string(errcode),
+				    (char *)NULL);
+	    LDAP_SetErrorCode(ldaptcl, errcode, interp);
+	    return TCL_ERROR;
+	}
+	return TCL_OK;
+    }
+
+    if (STREQU (subCommand, "unbind")) {
+	if (objc != 2) {
+	    Tcl_WrongNumArgs (interp, 2, objv, "");
+	    return TCL_ERROR;
+	}
+
+       return Tcl_DeleteCommand(interp, Tcl_GetStringFromObj(objv[0], NULL));
+    }
+
+    /* object delete dn */
+    if (STREQU (subCommand, "delete")) {
+	if (objc != 3) {
+	    Tcl_WrongNumArgs (interp, 2, objv, "dn");
+	    return TCL_ERROR;
+	}
+
+       dn = Tcl_GetStringFromObj (objv [2], NULL);
+       if ((errcode = ldap_delete_s(ldap, dn)) != LDAP_SUCCESS) {
+	   Tcl_AppendStringsToObj (resultObj,
+			           "LDAP delete error: ",
+				   ldap_err2string(errcode),
+				   (char *)NULL);
+	   LDAP_SetErrorCode(ldaptcl, errcode, interp);
+	   return TCL_ERROR;
+       }
+       return TCL_OK;
+    }
+
+    /* object rename_rdn dn rdn */
+    /* object modify_rdn dn rdn */
+    if (STREQU (subCommand, "rename_rdn") || STREQU (subCommand, "modify_rdn")) {
+	char    *rdn;
+	int      deleteOldRdn;
+
+	if (objc != 4) {
+	    Tcl_WrongNumArgs (interp, 2, objv, "dn rdn");
+	    return TCL_ERROR;
+	}
+
+	dn = Tcl_GetStringFromObj (objv [2], NULL);
+	rdn = Tcl_GetStringFromObj (objv [3], NULL);
+
+	deleteOldRdn = (*subCommand == 'r');
+
+	if ((errcode = ldap_modrdn2_s (ldap, dn, rdn, deleteOldRdn)) != LDAP_SUCCESS) {
+	    Tcl_AppendStringsToObj (resultObj,
+				    "LDAP ",
+				    subCommand,
+				    " error: ",
+				    ldap_err2string(errcode),
+				    (char *)NULL);
+	    LDAP_SetErrorCode(ldaptcl, errcode, interp);
+	    return TCL_ERROR;
+	}
+	return TCL_OK;
+    }
+
+    /* object add dn attributePairList */
+    /* object add_attributes dn attributePairList */
+    /* object replace_attributes dn attributePairList */
+    /* object delete_attributes dn attributePairList */
+
+    if (STREQU (subCommand, "add")) {
+	is_add = 1;
+	is_add_or_modify = 1;
+    } else {
+	is_add = 0;
+	if (STREQU (subCommand, "add_attributes")) {
+	    is_add_or_modify = 1;
+	    mod_op = LDAP_MOD_ADD;
+	} else if (STREQU (subCommand, "replace_attributes")) {
+	    is_add_or_modify = 1;
+	    mod_op = LDAP_MOD_REPLACE;
+	} else if (STREQU (subCommand, "delete_attributes")) {
+	    is_add_or_modify = 1;
+	    mod_op = LDAP_MOD_DELETE;
+	}
+    }
+
+    if (is_add_or_modify) {
+	int          result;
+	LDAPMod    **modArray;
+	LDAPMod     *mod;
+	char       **valPtrs = NULL;
+	int          attribObjc;
+	Tcl_Obj    **attribObjv;
+	int          valuesObjc;
+	Tcl_Obj    **valuesObjv;
+	int          nPairs, allPairs;
+	int          i;
+	int          j;
+	int	     pairIndex;
+	int	     modIndex;
+
+	Tcl_Obj      *resultObj = Tcl_GetObjResult (interp);
+
+	if (objc < 4 || objc > 4 && is_add || is_add == 0 && objc&1) {
+	    Tcl_AppendStringsToObj (resultObj,
+				    "wrong # args: ",
+				    Tcl_GetStringFromObj (objv [0], NULL),
+				    " ",
+				    subCommand,
+				    " dn attributePairList",
+				    (char *)NULL);
+	    if (!is_add)
+		Tcl_AppendStringsToObj (resultObj,
+		    " ?[add|delete|replace] attributePairList ...?", (char *)NULL);
+	    return TCL_ERROR;
+	}
+
+	dn = Tcl_GetStringFromObj (objv [2], NULL);
+
+	allPairs = 0;
+	for (i = 3; i < objc; i += 2) {
+	    if (Tcl_ListObjLength (interp, objv[i], &j) == TCL_ERROR)
+		return TCL_ERROR;
+	    if (j & 1) {
+		Tcl_AppendStringsToObj (resultObj,
+					"attribute list does not contain an ",
+					"even number of key-value elements",
+					(char *)NULL);
+		return TCL_ERROR;
+	    }
+	    allPairs += j / 2;
+	}
+
+	modArray = (LDAPMod **)malloc (sizeof(LDAPMod *) * (allPairs + 1));
+
+	pairIndex = 3;
+	modIndex = 0;
+
+	do {
+
+	if (Tcl_ListObjGetElements (interp, objv [pairIndex], &attribObjc, &attribObjv)
+	  == TCL_ERROR) {
+	   mod_op = -1;
+	   goto badop;
+	}
+
+	nPairs = attribObjc / 2;
+
+	for (i = 0; i < nPairs; i++) {
+	    mod = modArray[modIndex++] = (LDAPMod *) malloc (sizeof(LDAPMod));
+	    mod->mod_op = mod_op;
+	    mod->mod_type = Tcl_GetStringFromObj (attribObjv [i * 2], NULL);
+
+	    if (Tcl_ListObjGetElements (interp, attribObjv [i * 2 + 1], &valuesObjc, &valuesObjv) == TCL_ERROR) {
+		/* FIX: cleanup memory here */
+		mod_op = -1;
+		goto badop;
+	    }
+
+	    valPtrs = mod->mod_vals.modv_strvals = \
+	        (char **)malloc (sizeof (char *) * (valuesObjc + 1));
+	    valPtrs[valuesObjc] = (char *)NULL;
+
+	    for (j = 0; j < valuesObjc; j++) {
+		valPtrs [j] = Tcl_GetStringFromObj (valuesObjv[j], NULL);
+
+		/* If it's "delete" and value is an empty string, make
+		 * value be NULL to indicate entire attribute is to be 
+		 * deleted */
+		if ((*valPtrs [j] == '\0') 
+		    && (mod->mod_op == LDAP_MOD_DELETE || mod->mod_op == LDAP_MOD_REPLACE)) {
+			valPtrs [j] = NULL;
+		}
+	    }
+	}
+
+	pairIndex += 2;
+	if (mod_op != -1 && pairIndex < objc) {
+	    subCommand = Tcl_GetStringFromObj (objv[pairIndex - 1], NULL);
+	    mod_op = -1;
+	    if (STREQU (subCommand, "add")) {
+		mod_op = LDAP_MOD_ADD;
+	    } else if (STREQU (subCommand, "replace")) {
+		mod_op = LDAP_MOD_REPLACE;
+	    } else if (STREQU (subCommand, "delete")) {
+		mod_op = LDAP_MOD_DELETE;
+	    }
+	    if (mod_op == -1) {
+		Tcl_SetStringObj (resultObj,
+			"Additional operators must be one of"
+			" add, replace, or delete", -1);
+		mod_op = -1;
+		goto badop;
+	    }
+	}
+
+	} while (mod_op != -1 && pairIndex < objc);
+	modArray[modIndex] = (LDAPMod *) NULL;
+
+	if (is_add) {
+	    result = ldap_add_s (ldap, dn, modArray);
+	} else {
+	    result = ldap_modify_s (ldap, dn, modArray);
+	    if (ldaptcl->caching)
+		ldap_uncache_entry (ldap, dn);
+	}
+
+        /* free the modArray elements, then the modArray itself. */
+badop:
+	for (i = 0; i < modIndex; i++) {
+	    free ((char *) modArray[i]->mod_vals.modv_strvals);
+	    free ((char *) modArray[i]);
+	}
+	free ((char *) modArray);
+
+	/* after modArray is allocated, mod_op = -1 upon error for cleanup */
+	if (mod_op == -1)
+	    return TCL_ERROR;
+
+	/* FIX: memory cleanup required all over the place here */
+        if (result != LDAP_SUCCESS) {
+	    Tcl_AppendStringsToObj (resultObj,
+				    "LDAP ",
+				    subCommand,
+				    " error: ",
+				    ldap_err2string(result),
+				    (char *)NULL);
+	    LDAP_SetErrorCode(ldaptcl, result, interp);
+	    return TCL_ERROR;
+	}
+	return TCL_OK;
+    }
+
+    /* object search controlArray dn pattern */
+    if (STREQU (subCommand, "search")) {
+	char        *controlArrayName;
+	Tcl_Obj     *controlArrayNameObj;
+
+	char        *scopeString;
+	int          scope;
+
+	char        *derefString;
+	int          deref;
+
+	char        *baseString;
+
+	char       **attributesArray;
+	char        *attributesString;
+	int          attributesArgc;
+
+	char        *filterPatternString;
+
+	char	    *timeoutString;
+	double 	     timeoutTime;
+	struct timeval timeout, *timeout_p;
+
+	char	    *paramString;
+	int	     cacheThis = -1;
+	int	     all = 0;
+
+	char	    *sortattr;
+
+	Tcl_Obj     *destArrayNameObj;
+	Tcl_Obj     *evalCodeObj;
+
+	if (objc != 5) {
+	    Tcl_WrongNumArgs (interp, 2, objv,
+				   "controlArray destArray code");
+	    return TCL_ERROR;
+	}
+
+        controlArrayNameObj = objv [2];
+	controlArrayName = Tcl_GetStringFromObj (controlArrayNameObj, NULL);
+
+	destArrayNameObj = objv [3];
+
+	evalCodeObj = objv [4];
+
+	baseString = Tcl_GetVar2 (interp, 
+				  controlArrayName, 
+				  "base",
+				  0);
+
+	if (baseString == (char *)NULL) {
+	    Tcl_AppendStringsToObj (resultObj,
+				    "required element \"base\" ",
+				    "is missing from ldap control array \"",
+				    controlArrayName,
+				    "\"",
+				    (char *)NULL);
+	    return TCL_ERROR;
+	}
+
+	filterPatternString = Tcl_GetVar2 (interp,
+				           controlArrayName,
+				           "filter",
+				           0);
+	if (filterPatternString == (char *)NULL) {
+	    filterPatternString = "(objectclass=*)";
+	}
+
+	/* Fetch scope setting from control array.
+	 * If it doesn't exist, default to subtree scoping.
+	 */
+	scopeString = Tcl_GetVar2 (interp, controlArrayName, "scope", 0);
+	if (scopeString == NULL) {
+	    scope = LDAP_SCOPE_SUBTREE;
+	} else {
+	    if (STREQU(scopeString, "base")) 
+		scope = LDAP_SCOPE_BASE;
+	    else if (STRNEQU(scopeString, "one", 3))
+		scope = LDAP_SCOPE_ONELEVEL;
+	    else if (STRNEQU(scopeString, "sub", 3))
+		scope = LDAP_SCOPE_SUBTREE;
+	    else {
+		Tcl_AppendStringsToObj (resultObj,
+				        "\"scope\" element of \"",
+				        controlArrayName,
+				        "\" array is not one of ",
+				        "\"base\", \"onelevel\", ",
+					"or \"subtree\"",
+				      (char *) NULL);
+		return TCL_ERROR;
+	    }
+	}
+
+#ifdef LDAP_OPT_DEREF				      
+	/* Fetch dereference control setting from control array.
+	 * If it doesn't exist, default to never dereference. */
+	derefString = Tcl_GetVar2 (interp,
+				   controlArrayName,
+				   "deref",
+				   0);
+	if (derefString == (char *)NULL) {
+	    deref = LDAP_DEREF_NEVER;
+	} else {
+	    if (STREQU(derefString, "never"))
+		deref = LDAP_DEREF_NEVER;
+	    else if (STREQU(derefString, "search"))
+		deref = LDAP_DEREF_SEARCHING;
+	    else if (STREQU(derefString, "find"))
+		deref = LDAP_DEREF_FINDING;
+	    else if (STREQU(derefString, "always"))
+		deref = LDAP_DEREF_ALWAYS;
+	    else {
+		Tcl_AppendStringsToObj (resultObj,
+				        "\"deref\" element of \"",
+				        controlArrayName,
+				        "\" array is not one of ",
+				        "\"never\", \"search\", \"find\", ",
+				        "or \"always\"",
+				        (char *) NULL);
+		return TCL_ERROR;
+	    }
+	}
+#endif
+
+	/* Fetch list of attribute names from control array.
+	 * If entry doesn't exist, default to NULL (all).
+	 */
+	attributesString = Tcl_GetVar2 (interp,
+				        controlArrayName,
+				        "attributes", 
+				        0);
+	if (attributesString == (char *)NULL) {
+	    attributesArray = NULL;
+	} else {
+	    if ((Tcl_SplitList (interp, 
+				attributesString,
+				&attributesArgc, 
+				&attributesArray)) != TCL_OK) {
+		return TCL_ERROR;
+	    }
+	}
+
+	/* Fetch timeout value if there is one
+	 */
+	timeoutString = Tcl_GetVar2 (interp,
+				        controlArrayName,
+				        "timeout", 
+				        0);
+	timeout.tv_usec = 0;
+	if (timeoutString == (char *)NULL) {
+	    timeout_p = NULL;
+	    timeout.tv_sec = 0;
+	} else {
+	    if (Tcl_GetDouble(interp, timeoutString, &timeoutTime) != TCL_OK)
+		return TCL_ERROR;
+	    timeout.tv_sec = floor(timeoutTime);
+	    timeout.tv_usec = (timeoutTime-timeout.tv_sec) * 1000000;
+	    timeout_p = &timeout;
+	}
+
+	paramString = Tcl_GetVar2 (interp, controlArrayName, "cache", 0);
+	if (paramString) {
+	    if (Tcl_GetInt(interp, paramString, &cacheThis) == TCL_ERROR)
+		return TCL_ERROR;
+	}
+
+	paramString = Tcl_GetVar2 (interp, controlArrayName, "all", 0);
+	if (paramString) {
+	    if (Tcl_GetInt(interp, paramString, &all) == TCL_ERROR)
+		return TCL_ERROR;
+	}
+
+	sortattr = Tcl_GetVar2 (interp, controlArrayName, "sort", 0);
+
+#ifdef UMICH_LDAP
+	ldap->ld_deref = deref; 
+	ldap->ld_timelimit = 0;
+	ldap->ld_sizelimit = 0; 
+	ldap->ld_options = 0;
+#endif
+
+	/* Caching control within the search: if the "cache" control array */
+	/* value is set, disable/enable caching accordingly */
+
+#if 0
+	if (cacheThis >= 0 && ldaptcl->caching != cacheThis) {
+	    if (cacheThis) {
+		if (ldaptcl->timeout == 0) {
+		    Tcl_SetStringObj(resultObj, "Caching never before enabled, I have no timeout value to use", -1);
+		    return TCL_ERROR;
+		}
+		ldap_enable_cache(ldap, ldaptcl->timeout, ldaptcl->maxmem);
+	    }
+	    else
+		ldap_disable_cache(ldap);
+	}
+#endif
+
+#ifdef LDAP_OPT_DEREF
+	ldap_set_option(ldap, LDAP_OPT_DEREF, &deref);
+#endif
+
+	tclResult = LDAP_PerformSearch (interp, 
+			            ldaptcl, 
+			            baseString, 
+			            scope, 
+			            attributesArray, 
+			            filterPatternString, 
+			            "",
+			            destArrayNameObj,
+			            evalCodeObj,
+				    timeout_p,
+				    all,
+				    sortattr);
+	/* Following the search, if we changed the caching behavior, change */
+	/* it back. */
+#if 0
+	if (cacheThis >= 0 && ldaptcl->caching != cacheThis) {
+	    if (cacheThis)
+		ldap_disable_cache(ldap);
+	    else
+		ldap_enable_cache(ldap, ldaptcl->timeout, ldaptcl->maxmem);
+	}
+#ifdef LDAP_OPT_DEREF
+	deref = LDAP_DEREF_NEVER;
+	ldap_set_option(ldap, LDAP_OPT_DEREF, &deref);
+#endif
+#endif
+	return tclResult;
+    }
+
+    /* object compare dn attr value */
+    if (STREQU (subCommand, "compare")) {
+	char        *dn;
+	char	    *attr;
+	char	    *value;
+	int	     result;
+	int	     lderrno;
+
+	if (objc != 5) {
+	    Tcl_WrongNumArgs (interp, 
+				   2, objv,
+				   "dn attribute value");
+	    return TCL_ERROR;
+	}
+
+	dn = Tcl_GetStringFromObj (objv[2], NULL);
+	attr = Tcl_GetStringFromObj (objv[3], NULL);
+	value = Tcl_GetStringFromObj (objv[4], NULL);
+	
+	result = ldap_compare_s (ldap, dn, attr, value);
+	if (result == LDAP_COMPARE_TRUE || result == LDAP_COMPARE_FALSE) {
+	    Tcl_SetBooleanObj(resultObj, result == LDAP_COMPARE_TRUE);
+	    return TCL_OK;
+	}
+	LDAP_SetErrorCode(ldaptcl, result, interp);
+	Tcl_AppendStringsToObj (resultObj,
+				"LDAP compare error: ",
+				LDAP_ERR_STRING(ldap),
+				(char *)NULL);
+	return TCL_ERROR;
+    }
+
+    if (STREQU (subCommand, "cache")) {
+#if defined(UMICH_LDAP) || (defined(OPEN_LDAP) && !defined(LDAP_API_VERSION))
+	char *cacheCommand;
+
+	if (objc < 3) {
+	  badargs:
+	    Tcl_WrongNumArgs (interp, 2, objv [0], "command [args...]");
+	    return TCL_ERROR;
+	}
+
+	cacheCommand = Tcl_GetStringFromObj (objv [2], NULL);
+
+	if (STREQU (cacheCommand, "uncache")) {
+	    char *dn;
+
+	    if (objc != 4) {
+		Tcl_WrongNumArgs (interp, 
+				       3, objv,
+				       "dn");
+		return TCL_ERROR;
+	    }
+
+            dn = Tcl_GetStringFromObj (objv [3], NULL);
+	    ldap_uncache_entry (ldap, dn);
+	    return TCL_OK;
+	}
+
+	if (STREQU (cacheCommand, "enable")) {
+	    long   timeout = ldaptcl->timeout;
+	    long   maxmem = ldaptcl->maxmem;
+
+	    if (objc > 5) {
+		Tcl_WrongNumArgs (interp, 3, objv, "?timeout? ?maxmem?");
+		return TCL_ERROR;
+	    }
+
+	    if (objc > 3) {
+		if (Tcl_GetLongFromObj (interp, objv [3], &timeout) == TCL_ERROR)
+		    return TCL_ERROR;
+	    }
+	    if (timeout == 0) {
+		Tcl_SetStringObj(resultObj,
+		    objc > 3 ? "timeouts must be greater than 0" : 
+		    "no previous timeout to reference", -1);
+		return TCL_ERROR;
+	    }
+
+	    if (objc > 4)
+		if (Tcl_GetLongFromObj (interp, objv [4], &maxmem) == TCL_ERROR)
+		    return TCL_ERROR;
+
+	    if (ldap_enable_cache (ldap, timeout, maxmem) == -1) {
+		Tcl_AppendStringsToObj (resultObj,
+					"LDAP cache enable error: ",
+					LDAP_ERR_STRING(ldap),
+					(char *)NULL);
+		LDAP_SetErrorCode(ldaptcl, -1, interp);
+		return TCL_ERROR;
+	    }
+	    ldaptcl->caching = 1;
+	    ldaptcl->timeout = timeout;
+	    ldaptcl->maxmem = maxmem;
+	    return TCL_OK;
+	}
+
+	if (objc != 3) goto badargs;
+
+	if (STREQU (cacheCommand, "disable")) {
+	    ldap_disable_cache (ldap);
+	    ldaptcl->caching = 0;
+	    return TCL_OK;
+	}
+
+	if (STREQU (cacheCommand, "destroy")) {
+	    ldap_destroy_cache (ldap);
+	    ldaptcl->caching = 0;
+	    return TCL_OK;
+	}
+
+	if (STREQU (cacheCommand, "flush")) {
+	    ldap_flush_cache (ldap);
+	    return TCL_OK;
+	}
+
+	if (STREQU (cacheCommand, "no_errors")) {
+	    ldap_set_cache_options (ldap, LDAP_CACHE_OPT_CACHENOERRS);
+	    return TCL_OK;
+	}
+
+	if (STREQU (cacheCommand, "all_errors")) {
+	    ldap_set_cache_options (ldap, LDAP_CACHE_OPT_CACHEALLERRS);
+	    return TCL_OK;
+	}
+
+	if (STREQU (cacheCommand, "size_errors")) {
+	    ldap_set_cache_options (ldap, 0);
+	    return TCL_OK;
+	}
+	Tcl_AppendStringsToObj (resultObj,
+				"\"",
+				command,
+				" ",
+				subCommand, 
+				"\" subcommand", 
+				" must be one of \"enable\", ",
+				"\"disable\", ",
+				"\"destroy\", \"flush\", \"uncache\", ",
+				"\"no_errors\", \"size_errors\",",
+				" or \"all_errors\"",
+				(char *)NULL);
+	return TCL_ERROR;
+#else
+	return TCL_OK;
+#endif
+    }
+    if (STREQU (subCommand, "trap")) {
+	Tcl_Obj *listObj, *resultObj;
+	int *p, l, i, code;
+
+	if (objc > 4) {
+	    Tcl_WrongNumArgs (interp, 2, objv,
+				   "command ?errorCode-list?");
+	    return TCL_ERROR;
+	}
+	if (objc == 2) {
+	    if (!ldaptcl->trapCmdObj)
+		return TCL_OK;
+	    resultObj = Tcl_NewListObj(0, NULL);
+	    Tcl_ListObjAppendElement(interp, resultObj, ldaptcl->trapCmdObj);
+	    if (ldaptcl->traplist) {
+		listObj = Tcl_NewObj();
+		for (p = ldaptcl->traplist; *p; p++) {
+		    Tcl_ListObjAppendElement(interp, listObj, 
+			Tcl_NewStringObj(ldaptclerrorcode[*p], -1));
+		}
+		Tcl_ListObjAppendElement(interp, resultObj, listObj);
+	    }
+	    Tcl_SetObjResult(interp, resultObj);
+	    return TCL_OK;
+	}
+	if (ldaptcl->trapCmdObj) {
+	    Tcl_DecrRefCount (ldaptcl->trapCmdObj);
+	    ldaptcl->trapCmdObj = NULL;
+	}
+	if (ldaptcl->traplist) {
+	    free(ldaptcl->traplist);
+	    ldaptcl->traplist = NULL;
+	}
+	Tcl_GetStringFromObj(objv[2], &l);
+	if (l == 0)
+	    return TCL_OK;		/* just turn off trap */
+	ldaptcl->trapCmdObj = objv[2];
+	Tcl_IncrRefCount (ldaptcl->trapCmdObj);
+	if (objc < 4)
+	    return TCL_OK;		/* no code list */
+	if (Tcl_ListObjLength(interp, objv[3], &l) != TCL_OK)
+	    return TCL_ERROR;
+	if (l == 0)
+	    return TCL_OK;		/* empty code list */
+	ldaptcl->traplist = (int*)malloc(sizeof(int) * (l + 1));
+	ldaptcl->traplist[l] = 0;
+	for (i = 0; i < l; i++) {
+	    Tcl_ListObjIndex(interp, objv[3], i, &resultObj);
+	    code = LDAP_ErrorStringToCode(interp, Tcl_GetStringFromObj(resultObj, NULL));
+	    if (code == -1) {
+		free(ldaptcl->traplist);
+		ldaptcl->traplist = NULL;
+		return TCL_ERROR;
+	    }
+	    ldaptcl->traplist[i] = code;
+	}
+	return TCL_OK;
+    }
+    if (STREQU (subCommand, "trapcodes")) {
+	int code;
+	Tcl_Obj *resultObj;
+	Tcl_Obj *stringObj;
+	resultObj = Tcl_GetObjResult(interp);
+
+	for (code = 0; code < LDAPTCL_MAXERR; code++) {
+	    if (!ldaptclerrorcode[code]) continue;
+	    Tcl_ListObjAppendElement(interp, resultObj,
+			Tcl_NewStringObj(ldaptclerrorcode[code], -1));
+	}
+	return TCL_OK;
+    }
+#ifdef LDAP_DEBUG
+    if (STREQU (subCommand, "debug")) {
+	if (objc != 3) {
+	    Tcl_AppendStringsToObj(resultObj, "Wrong # of arguments",
+		(char*)NULL);
+	    return TCL_ERROR;
+	}
+	return Tcl_GetIntFromObj(interp, objv[2], &ldap_debug);
+    }
+#endif
+
+    /* FIX: this needs to enumerate all the possibilities */
+    Tcl_AppendStringsToObj (resultObj,
+	                    "subcommand \"", 
+			    subCommand, 
+			    "\" must be one of \"add\", ",
+			    "\"add_attributes\", ",
+			    "\"bind\", \"cache\", \"delete\", ",
+			    "\"delete_attributes\", \"modify\", ",
+			    "\"modify_rdn\", \"rename_rdn\", ",
+			    "\"replace_attributes\", ",
+			    "\"search\" or \"unbind\".",
+	                    (char *)NULL);
+    return TCL_ERROR;
+}
+
+/* 
+ * Delete and LDAP command object
+ *
+ */
+static void
+NeoX_LdapObjDeleteCmd(clientData)
+    ClientData    clientData;
+{
+    LDAPTCL      *ldaptcl = (LDAPTCL *)clientData;
+    LDAP         *ldap = ldaptcl->ldap;
+
+    if (ldaptcl->trapCmdObj)
+	Tcl_DecrRefCount (ldaptcl->trapCmdObj);
+    if (ldaptcl->traplist)
+	free(ldaptcl->traplist);
+    ldap_unbind(ldap);
+    free((char*) ldaptcl);
+}
+
+/*-----------------------------------------------------------------------------
+ * NeoX_LdapObjCmd --
+ *  
+ * Implements the `ldap' command:
+ *    ldap open newObjName host [port]
+ *    ldap init newObjName host [port]
+ *  
+ * Results:
+ *      A standard Tcl result.
+ *      
+ * Side effects:
+ *      See the user documentation.
+ *-----------------------------------------------------------------------------
+ */     
+static int
+NeoX_LdapObjCmd (clientData, interp, objc, objv)
+    ClientData    clientData;
+    Tcl_Interp   *interp;
+    int           objc;
+    Tcl_Obj      *CONST objv[];
+{
+    extern int    errno;
+    char         *subCommand;
+    char         *newCommand;
+    char         *ldapHost;
+    int           ldapPort = LDAP_PORT;
+    LDAP         *ldap;
+    LDAPTCL	 *ldaptcl;
+
+    Tcl_Obj      *resultObj = Tcl_GetObjResult (interp);
+
+    if (objc < 3) {
+	Tcl_WrongNumArgs (interp, 1, objv,
+			       "(open|init) new_command host [port]|explode dn");
+	return TCL_ERROR;
+    }
+
+    subCommand = Tcl_GetStringFromObj (objv[1], NULL);
+
+    if (STREQU(subCommand, "explode")) {
+	char *param;
+	int nonames = 0;
+	int list = 0;
+	char **exploded, **p;
+
+	param = Tcl_GetStringFromObj (objv[2], NULL);
+	if (param[0] == '-') {
+	    if (STREQU(param, "-nonames")) {
+		nonames = 1;
+	    } else if (STREQU(param, "-list")) {
+		list = 1;
+	    } else {
+		Tcl_WrongNumArgs (interp, 1, objv, "explode ?-nonames|-list? dn");
+		return TCL_ERROR;
+	    }
+	}
+	if (nonames || list)
+	    param = Tcl_GetStringFromObj (objv[3], NULL);
+	exploded = ldap_explode_dn(param, nonames);
+	for (p = exploded; *p; p++) {
+	    if (list) {
+		char *q = strchr(*p, '=');
+		if (!q) {
+		    Tcl_SetObjLength(resultObj, 0);
+		    Tcl_AppendStringsToObj(resultObj, "rdn ", *p,
+			" missing '='", NULL);
+		    ldap_value_free(exploded);
+		    return TCL_ERROR;
+		}
+		*q = '\0';
+		if (Tcl_ListObjAppendElement(interp, resultObj,
+			Tcl_NewStringObj(*p, -1)) != TCL_OK ||
+			Tcl_ListObjAppendElement(interp, resultObj,
+			Tcl_NewStringObj(q+1, -1)) != TCL_OK) {
+		    ldap_value_free(exploded);
+		    return TCL_ERROR;
+		}
+	    } else {
+		if (Tcl_ListObjAppendElement(interp, resultObj,
+			Tcl_NewStringObj(*p, -1))) {
+		    ldap_value_free(exploded);
+		    return TCL_ERROR;
+		}
+	    }
+	}
+	ldap_value_free(exploded);
+	return TCL_OK;
+    }
+
+#ifdef UMICH_LDAP
+    if (STREQU(subCommand, "friendly")) {
+	char *friendly = ldap_dn2ufn(Tcl_GetStringFromObj(objv[2], NULL));
+	Tcl_SetStringObj(resultObj, friendly, -1);
+	free(friendly);
+	return TCL_OK;
+    }
+#endif
+
+    newCommand = Tcl_GetStringFromObj (objv[2], NULL);
+    ldapHost = Tcl_GetStringFromObj (objv[3], NULL);
+
+    if (objc == 5) {
+	if (Tcl_GetIntFromObj (interp, objv [4], &ldapPort) == TCL_ERROR) {
+	    Tcl_AppendStringsToObj (resultObj,
+				    "LDAP port number is non-numeric",
+				    (char *)NULL);
+            return TCL_ERROR;
+	}
+    }
+
+    if (STREQU (subCommand, "open")) {
+	ldap = ldap_open (ldapHost, ldapPort);
+    } else if (STREQU (subCommand, "init")) {
+	int version = -1;
+	int i;
+	int value;
+	char *subOption;
+	char *subValue;
+
+#if LDAPTCL_PROTOCOL_VERSION_DEFAULT
+	version = LDAPTCL_PROTOCOL_VERSION_DEFAULT;
+#endif
+
+	for (i = 6; i < objc; i += 2)  {
+	    subOption =  Tcl_GetStringFromObj(objv[i-1], NULL);
+	    if (STREQU (subOption, "protocol_version")) {
+#ifdef LDAP_OPT_PROTOCOL_VERSION
+		subValue = Tcl_GetStringFromObj(objv[i], NULL);
+		if (STREQU (subValue, "2")) {
+		    version = LDAP_VERSION2;
+		}
+		else if (STREQU (subValue, "3")) {
+#ifdef LDAP_VERSION3
+		    version = LDAP_VERSION3;
+#else
+		    Tcl_SetStringObj (resultObj, "protocol_version 3 not supported", -1);
+		    return TCL_ERROR;
+#endif
+		}
+		else {
+		    Tcl_SetStringObj (resultObj, "protocol_version must be '2' or '3'", -1);
+		    return TCL_ERROR;
+		}
+#else
+		Tcl_SetStringObj (resultObj, "protocol_version not supported", -1);
+		return TCL_ERROR;
+#endif
+	    } else if (STREQU (subOption, "port")) {
+		if (Tcl_GetIntFromObj (interp, objv [i], &ldapPort) == TCL_ERROR) {
+		    Tcl_AppendStringsToObj (resultObj,
+					    "LDAP port number is non-numeric",
+					    (char *)NULL);
+		    return TCL_ERROR;
+		}
+	    } else {
+		Tcl_SetStringObj (resultObj, "valid options: protocol_version, port", -1);
+		return TCL_ERROR;
+	    }
+	}
+	ldap = ldap_init (ldapHost, ldapPort);
+
+#ifdef LDAP_OPT_PROTOCOL_VERSION
+	if (version != -1)
+	    ldap_set_option(ldap, LDAP_OPT_PROTOCOL_VERSION, &version);
+#endif
+    } else {
+	Tcl_AppendStringsToObj (resultObj, 
+				"option was not \"open\" or \"init\"");
+	return TCL_ERROR;
+    }
+
+    if (ldap == (LDAP *)NULL) {
+	Tcl_SetErrno(errno);
+	Tcl_AppendStringsToObj (resultObj, 
+				Tcl_PosixError (interp), 
+				(char *)NULL);
+	return TCL_ERROR;
+    }
+
+#ifdef UMICH_LDAP
+    ldap->ld_deref = LDAP_DEREF_NEVER;  /* Turn off alias dereferencing */
+#endif
+
+    ldaptcl = (LDAPTCL *) malloc(sizeof(LDAPTCL));
+    ldaptcl->ldap = ldap;
+    ldaptcl->caching = 0;
+    ldaptcl->timeout = 0;
+    ldaptcl->maxmem = 0;
+    ldaptcl->trapCmdObj = NULL;
+    ldaptcl->traplist = NULL;
+    ldaptcl->flags = 0;
+
+    Tcl_CreateObjCommand (interp,
+			  newCommand,
+                          NeoX_LdapTargetObjCmd,
+                          (ClientData) ldaptcl,
+                          NeoX_LdapObjDeleteCmd);
+    return TCL_OK;
+}
+
+/*-----------------------------------------------------------------------------
+ * Neo_initLDAP --
+ *     Initialize the LDAP interface.
+ *-----------------------------------------------------------------------------
+ */     
+int
+Ldaptcl_Init (interp)
+Tcl_Interp   *interp;
+{
+    Tcl_CreateObjCommand (interp,
+			  "ldap",
+                          NeoX_LdapObjCmd,
+                          (ClientData) NULL,
+                          (Tcl_CmdDeleteProc*) NULL);
+    /*
+    if (Neo_initLDAPX(interp) != TCL_OK)
+	return TCL_ERROR;
+    */
+    Tcl_PkgProvide(interp, "Ldaptcl", VERSION);
+    return TCL_OK;
+}
diff --git a/contrib/ldaptcl/pkgIndex.tcl.in b/contrib/ldaptcl/pkgIndex.tcl.in
new file mode 100644
index 0000000..f257556
--- /dev/null
+++ b/contrib/ldaptcl/pkgIndex.tcl.in
@@ -0,0 +1 @@
+package ifneeded Ldaptcl @NEO_VERSION@ "package require Tclx 8.0; load [file join $dir .. @NEO_SHARED_LIB_FILE@] Ldaptcl"
diff --git a/contrib/ldaptcl/tclAppInit.c b/contrib/ldaptcl/tclAppInit.c
new file mode 100644
index 0000000..f84e182
--- /dev/null
+++ b/contrib/ldaptcl/tclAppInit.c
@@ -0,0 +1,140 @@
+/* 
+ * tclAppInit.c --
+ *
+ *	Provides a default version of the main program and Tcl_AppInit
+ *	procedure for Tcl applications (without Tk).
+ *
+ * Copyright (c) 1993 The Regents of the University of California.
+ * Copyright (c) 1994-1995 Sun Microsystems, Inc.
+ *
+ * See the file "license.terms" for information on usage and redistribution
+ * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ *
+ * SCCS: @(#) tclAppInit.c 1.17 96/03/26 12:45:29
+ */
+
+#include "tcl.h"
+
+/*
+ * The following variable is a special hack that is needed in order for
+ * Sun shared libraries to be used for Tcl.
+ */
+
+extern int matherr();
+int *tclDummyMathPtr = (int *) matherr;
+
+#ifdef TCL_TEST
+EXTERN int		Tcltest_Init _ANSI_ARGS_((Tcl_Interp *interp));
+#endif /* TCL_TEST */
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * main --
+ *
+ *	This is the main program for the application.
+ *
+ * Results:
+ *	None: Tcl_Main never returns here, so this procedure never
+ *	returns either.
+ *
+ * Side effects:
+ *	Whatever the application does.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+main(argc, argv)
+    int argc;			/* Number of command-line arguments. */
+    char **argv;		/* Values of command-line arguments. */
+{
+#ifdef USE_TCLX
+    TclX_Main(argc, argv, Tcl_AppInit);
+#else
+    Tcl_Main(argc, argv, Tcl_AppInit);
+#endif
+    return 0;			/* Needed only to prevent compiler warning. */
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_AppInit --
+ *
+ *	This procedure performs application-specific initialization.
+ *	Most applications, especially those that incorporate additional
+ *	packages, will have their own version of this procedure.
+ *
+ * Results:
+ *	Returns a standard Tcl completion code, and leaves an error
+ *	message in interp->result if an error occurs.
+ *
+ * Side effects:
+ *	Depends on the startup script.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+Tcl_AppInit(interp)
+    Tcl_Interp *interp;		/* Interpreter for application. */
+{
+    if (Tcl_Init(interp) == TCL_ERROR) {
+	return TCL_ERROR;
+    }
+
+#ifdef USE_ITCL
+    if (Itcl_Init(interp) == TCL_ERROR) {
+	return TCL_ERROR;
+    }
+    Tcl_StaticPackage (interp, "Itcl", Itcl_Init, NULL);
+#endif
+
+#ifdef TCL_TEST
+    if (Tcltest_Init(interp) == TCL_ERROR) {
+	return TCL_ERROR;
+    }
+    Tcl_StaticPackage(interp, "Tcltest", Tcltest_Init,
+            (Tcl_PackageInitProc *) NULL);
+#endif /* TCL_TEST */
+
+#ifdef USE_TCLX
+    if (Tclx_Init (interp) == TCL_ERROR) {
+	return TCL_ERROR;
+    }   
+    Tcl_StaticPackage (interp, "Tclx", Tclx_Init, NULL);
+#endif
+
+    if (Ldaptcl_Init(interp) == TCL_ERROR) {
+	return TCL_ERROR;
+    }
+    Tcl_StaticPackage(interp, "Ldaptcl", Ldaptcl_Init,
+            (Tcl_PackageInitProc *) NULL);
+
+    /*
+     * Call the init procedures for included packages.  Each call should
+     * look like this:
+     *
+     * if (Mod_Init(interp) == TCL_ERROR) {
+     *     return TCL_ERROR;
+     * }
+     *
+     * where "Mod" is the name of the module.
+     */
+
+    /*
+     * Call Tcl_CreateCommand for application-specific commands, if
+     * they weren't already created by the init procedures called above.
+     */
+
+    /*
+     * Specify a user-specific startup file to invoke if the application
+     * is run interactively.  Typically the startup file is "~/.apprc"
+     * where "app" is the name of the application.  If this line is deleted
+     * then no user-specific startup file will be run under any conditions.
+     */
+
+    Tcl_SetVar(interp, "tcl_rcFileName", "~/.tclshrc", TCL_GLOBAL_ONLY);
+    return TCL_OK;
+}
diff --git a/contrib/ldaptcl/tkAppInit.c b/contrib/ldaptcl/tkAppInit.c
new file mode 100644
index 0000000..68fd956
--- /dev/null
+++ b/contrib/ldaptcl/tkAppInit.c
@@ -0,0 +1,119 @@
+/* 
+ * tkXAppInit.c --
+ *
+ * Provides a default version of the Tcl_AppInit procedure for use with
+ * applications built with Extended Tcl and Tk on Unix systems.  This is based
+ * on the the UCB Tk file tkAppInit.c
+ *-----------------------------------------------------------------------------
+ * Copyright 1991-1996 Karl Lehenbauer and Mark Diekhans.
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation for any purpose and without fee is hereby granted, provided
+ * that the above copyright notice appear in all copies.  Karl Lehenbauer and
+ * Mark Diekhans make no representations about the suitability of this
+ * software for any purpose.  It is provided "as is" without express or
+ * implied warranty.
+ *-----------------------------------------------------------------------------
+ * $OpenLDAP$
+ *-----------------------------------------------------------------------------
+ */
+
+#include "tclExtend.h"
+#include "tk.h"
+
+/*
+ * The following variable is a special hack that insures the tcl
+ * version of matherr() is used when linking against shared libraries
+ * Even if matherr is not used on this system, there is a dummy version
+ * in libtcl.
+ */
+EXTERN int matherr ();
+int (*tclDummyMathPtr)() = matherr;
+
+
+/*-----------------------------------------------------------------------------
+ * main --
+ *
+ * This is the main program for the application.
+ *-----------------------------------------------------------------------------
+ */
+#ifdef __cplusplus
+int
+main (int    argc,
+      char **argv)
+#else
+int
+main (argc, argv)
+    int    argc;
+    char **argv;
+#endif
+{
+#ifdef USE_TCLX
+    TkX_Main(argc, argv, Tcl_AppInit);
+#else
+    Tk_Main(argc, argv, Tcl_AppInit);
+#endif
+    return 0;                   /* Needed only to prevent compiler warning. */
+}
+
+/*-----------------------------------------------------------------------------
+ * Tcl_AppInit --
+ *
+ * This procedure performs application-specific initialization. Most
+ * applications, especially those that incorporate additional packages, will
+ * have their own version of this procedure.
+ *
+ * Results:
+ *    Returns a standard Tcl completion code, and leaves an error message in
+ * interp->result if an error occurs.
+ *-----------------------------------------------------------------------------
+ */
+#ifdef __cplusplus
+int
+Tcl_AppInit (Tcl_Interp *interp)
+#else
+int
+Tcl_AppInit (interp)
+    Tcl_Interp *interp;
+#endif
+{
+    if (Tcl_Init (interp) == TCL_ERROR) {
+        return TCL_ERROR;
+    }
+#ifdef USE_TCLX
+    if (Tclx_Init(interp) == TCL_ERROR) {
+        return TCL_ERROR;
+    }
+    Tcl_StaticPackage(interp, "Tclx", Tclx_Init, Tclx_SafeInit);
+#endif
+    if (Tk_Init(interp) == TCL_ERROR) {
+        return TCL_ERROR;
+    }
+    Tcl_StaticPackage(interp, "Tk", Tk_Init, (Tcl_PackageInitProc *) NULL);
+#ifdef USE_TCLX
+    if (Tkx_Init(interp) == TCL_ERROR) {
+        return TCL_ERROR;
+    }
+    Tcl_StaticPackage(interp, "Tkx", Tkx_Init, (Tcl_PackageInitProc *) NULL);
+#endif
+
+    if (Ldaptcl_Init(interp) == TCL_ERROR) {
+	return TCL_ERROR;
+    }
+    Tcl_StaticPackage(interp, "Ldaptcl", Ldaptcl_Init,
+            (Tcl_PackageInitProc *) NULL);
+
+    /*
+     * Call Tcl_CreateCommand for application-specific commands, if
+     * they weren't already created by the init procedures called above.
+     */
+
+    /*
+     * Specify a user-specific startup file to invoke if the application
+     * is run interactively.  Typically the startup file is "~/.apprc"
+     * where "app" is the name of the application.  If this line is deleted
+     * then no user-specific startup file will be run under any conditions.
+     */
+    Tcl_SetVar(interp, "tcl_rcFileName", "~/.wishxrc", TCL_GLOBAL_ONLY);
+    return TCL_OK;
+}