diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:26:58 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:26:58 +0000 |
commit | 999ae6be3243c7b4a815247199447b53c39a3d65 (patch) | |
tree | 1f35b42b5e5f462d35ba452e4dcfa188ce0543fd /sshd.0 | |
parent | Initial commit. (diff) | |
download | openssh-999ae6be3243c7b4a815247199447b53c39a3d65.tar.xz openssh-999ae6be3243c7b4a815247199447b53c39a3d65.zip |
Adding upstream version 1:7.9p1.upstream/1%7.9p1upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | sshd.0 | 653 |
1 files changed, 653 insertions, 0 deletions
@@ -0,0 +1,653 @@ +SSHD(8) System Manager's Manual SSHD(8) + +NAME + sshd M-bM-^@M-^S OpenSSH SSH daemon + +SYNOPSIS + sshd [-46DdeiqTt] [-C connection_spec] [-c host_certificate_file] + [-E log_file] [-f config_file] [-g login_grace_time] + [-h host_key_file] [-o option] [-p port] [-u len] + +DESCRIPTION + sshd (OpenSSH Daemon) is the daemon program for ssh(1). Together these + programs replace rlogin and rsh, and provide secure encrypted + communications between two untrusted hosts over an insecure network. + + sshd listens for connections from clients. It is normally started at + boot from /etc/rc. It forks a new daemon for each incoming connection. + The forked daemons handle key exchange, encryption, authentication, + command execution, and data exchange. + + sshd can be configured using command-line options or a configuration file + (by default sshd_config(5)); command-line options override values + specified in the configuration file. sshd rereads its configuration file + when it receives a hangup signal, SIGHUP, by executing itself with the + name and options it was started with, e.g. /usr/sbin/sshd. + + The options are as follows: + + -4 Forces sshd to use IPv4 addresses only. + + -6 Forces sshd to use IPv6 addresses only. + + -C connection_spec + Specify the connection parameters to use for the -T extended test + mode. If provided, any Match directives in the configuration + file that would apply are applied before the configuration is + written to standard output. The connection parameters are + supplied as keyword=value pairs and may be supplied in any order, + either with multiple -C options or as a comma-separated list. + The keywords are M-bM-^@M-^\addr,M-bM-^@M-^] M-bM-^@M-^\userM-bM-^@M-^], M-bM-^@M-^\hostM-bM-^@M-^], M-bM-^@M-^\laddrM-bM-^@M-^], M-bM-^@M-^\lportM-bM-^@M-^], and + M-bM-^@M-^\rdomainM-bM-^@M-^] and correspond to source address, user, resolved source + host name, local address, local port number and routing domain + respectively. + + -c host_certificate_file + Specifies a path to a certificate file to identify sshd during + key exchange. The certificate file must match a host key file + specified using the -h option or the HostKey configuration + directive. + + -D When this option is specified, sshd will not detach and does not + become a daemon. This allows easy monitoring of sshd. + + -d Debug mode. The server sends verbose debug output to standard + error, and does not put itself in the background. The server + also will not fork and will only process one connection. This + option is only intended for debugging for the server. Multiple + -d options increase the debugging level. Maximum is 3. + + -E log_file + Append debug logs to log_file instead of the system log. + + -e Write debug logs to standard error instead of the system log. + + -f config_file + Specifies the name of the configuration file. The default is + /etc/ssh/sshd_config. sshd refuses to start if there is no + configuration file. + + -g login_grace_time + Gives the grace time for clients to authenticate themselves + (default 120 seconds). If the client fails to authenticate the + user within this many seconds, the server disconnects and exits. + A value of zero indicates no limit. + + -h host_key_file + Specifies a file from which a host key is read. This option must + be given if sshd is not run as root (as the normal host key files + are normally not readable by anyone but root). The default is + /etc/ssh/ssh_host_ecdsa_key, /etc/ssh/ssh_host_ed25519_key and + /etc/ssh/ssh_host_rsa_key. It is possible to have multiple host + key files for the different host key algorithms. + + -i Specifies that sshd is being run from inetd(8). + + -o option + Can be used to give options in the format used in the + configuration file. This is useful for specifying options for + which there is no separate command-line flag. For full details + of the options, and their values, see sshd_config(5). + + -p port + Specifies the port on which the server listens for connections + (default 22). Multiple port options are permitted. Ports + specified in the configuration file with the Port option are + ignored when a command-line port is specified. Ports specified + using the ListenAddress option override command-line ports. + + -q Quiet mode. Nothing is sent to the system log. Normally the + beginning, authentication, and termination of each connection is + logged. + + -T Extended test mode. Check the validity of the configuration + file, output the effective configuration to stdout and then exit. + Optionally, Match rules may be applied by specifying the + connection parameters using one or more -C options. + + -t Test mode. Only check the validity of the configuration file and + sanity of the keys. This is useful for updating sshd reliably as + configuration options may change. + + -u len This option is used to specify the size of the field in the utmp + structure that holds the remote host name. If the resolved host + name is longer than len, the dotted decimal value will be used + instead. This allows hosts with very long host names that + overflow this field to still be uniquely identified. Specifying + -u0 indicates that only dotted decimal addresses should be put + into the utmp file. -u0 may also be used to prevent sshd from + making DNS requests unless the authentication mechanism or + configuration requires it. Authentication mechanisms that may + require DNS include HostbasedAuthentication and using a + from="pattern-list" option in a key file. Configuration options + that require DNS include using a USER@HOST pattern in AllowUsers + or DenyUsers. + +AUTHENTICATION + The OpenSSH SSH daemon supports SSH protocol 2 only. Each host has a + host-specific key, used to identify the host. Whenever a client + connects, the daemon responds with its public host key. The client + compares the host key against its own database to verify that it has not + changed. Forward security is provided through a Diffie-Hellman key + agreement. This key agreement results in a shared session key. The rest + of the session is encrypted using a symmetric cipher, currently 128-bit + AES, Blowfish, 3DES, CAST128, Arcfour, 192-bit AES, or 256-bit AES. The + client selects the encryption algorithm to use from those offered by the + server. Additionally, session integrity is provided through a + cryptographic message authentication code (hmac-md5, hmac-sha1, umac-64, + umac-128, hmac-sha2-256 or hmac-sha2-512). + + Finally, the server and the client enter an authentication dialog. The + client tries to authenticate itself using host-based authentication, + public key authentication, challenge-response authentication, or password + authentication. + + Regardless of the authentication type, the account is checked to ensure + that it is accessible. An account is not accessible if it is locked, + listed in DenyUsers or its group is listed in DenyGroups . The + definition of a locked account is system dependent. Some platforms have + their own account database (eg AIX) and some modify the passwd field ( + M-bM-^@M-^X*LK*M-bM-^@M-^Y on Solaris and UnixWare, M-bM-^@M-^X*M-bM-^@M-^Y on HP-UX, containing M-bM-^@M-^XNologinM-bM-^@M-^Y on + Tru64, a leading M-bM-^@M-^X*LOCKED*M-bM-^@M-^Y on FreeBSD and a leading M-bM-^@M-^X!M-bM-^@M-^Y on most + Linuxes). If there is a requirement to disable password authentication + for the account while allowing still public-key, then the passwd field + should be set to something other than these values (eg M-bM-^@M-^XNPM-bM-^@M-^Y or M-bM-^@M-^X*NP*M-bM-^@M-^Y ). + + If the client successfully authenticates itself, a dialog for preparing + the session is entered. At this time the client may request things like + allocating a pseudo-tty, forwarding X11 connections, forwarding TCP + connections, or forwarding the authentication agent connection over the + secure channel. + + After this, the client either requests a shell or execution of a command. + The sides then enter session mode. In this mode, either side may send + data at any time, and such data is forwarded to/from the shell or command + on the server side, and the user terminal in the client side. + + When the user program terminates and all forwarded X11 and other + connections have been closed, the server sends command exit status to the + client, and both sides exit. + +LOGIN PROCESS + When a user successfully logs in, sshd does the following: + + 1. If the login is on a tty, and no command has been specified, + prints last login time and /etc/motd (unless prevented in the + configuration file or by ~/.hushlogin; see the FILES section). + + 2. If the login is on a tty, records login time. + + 3. Checks /etc/nologin; if it exists, prints contents and quits + (unless root). + + 4. Changes to run with normal user privileges. + + 5. Sets up basic environment. + + 6. Reads the file ~/.ssh/environment, if it exists, and users are + allowed to change their environment. See the + PermitUserEnvironment option in sshd_config(5). + + 7. Changes to user's home directory. + + 8. If ~/.ssh/rc exists and the sshd_config(5) PermitUserRC option + is set, runs it; else if /etc/ssh/sshrc exists, runs it; + otherwise runs xauth. The M-bM-^@M-^\rcM-bM-^@M-^] files are given the X11 + authentication protocol and cookie in standard input. See + SSHRC, below. + + 9. Runs user's shell or command. All commands are run under the + user's login shell as specified in the system password + database. + +SSHRC + If the file ~/.ssh/rc exists, sh(1) runs it after reading the environment + files but before starting the user's shell or command. It must not + produce any output on stdout; stderr must be used instead. If X11 + forwarding is in use, it will receive the "proto cookie" pair in its + standard input (and DISPLAY in its environment). The script must call + xauth(1) because sshd will not run xauth automatically to add X11 + cookies. + + The primary purpose of this file is to run any initialization routines + which may be needed before the user's home directory becomes accessible; + AFS is a particular example of such an environment. + + This file will probably contain some initialization code followed by + something similar to: + + if read proto cookie && [ -n "$DISPLAY" ]; then + if [ `echo $DISPLAY | cut -c1-10` = 'localhost:' ]; then + # X11UseLocalhost=yes + echo add unix:`echo $DISPLAY | + cut -c11-` $proto $cookie + else + # X11UseLocalhost=no + echo add $DISPLAY $proto $cookie + fi | xauth -q - + fi + + If this file does not exist, /etc/ssh/sshrc is run, and if that does not + exist either, xauth is used to add the cookie. + +AUTHORIZED_KEYS FILE FORMAT + AuthorizedKeysFile specifies the files containing public keys for public + key authentication; if this option is not specified, the default is + ~/.ssh/authorized_keys and ~/.ssh/authorized_keys2. Each line of the + file contains one key (empty lines and lines starting with a M-bM-^@M-^X#M-bM-^@M-^Y are + ignored as comments). Public keys consist of the following space- + separated fields: options, keytype, base64-encoded key, comment. The + options field is optional. The keytype is M-bM-^@M-^\ecdsa-sha2-nistp256M-bM-^@M-^], + M-bM-^@M-^\ecdsa-sha2-nistp384M-bM-^@M-^], M-bM-^@M-^\ecdsa-sha2-nistp521M-bM-^@M-^], M-bM-^@M-^\ssh-ed25519M-bM-^@M-^], M-bM-^@M-^\ssh-dssM-bM-^@M-^] or + M-bM-^@M-^\ssh-rsaM-bM-^@M-^]; the comment field is not used for anything (but may be + convenient for the user to identify the key). + + Note that lines in this file can be several hundred bytes long (because + of the size of the public key encoding) up to a limit of 8 kilobytes, + which permits DSA keys up to 8 kilobits and RSA keys up to 16 kilobits. + You don't want to type them in; instead, copy the id_dsa.pub, + id_ecdsa.pub, id_ed25519.pub, or the id_rsa.pub file and edit it. + + sshd enforces a minimum RSA key modulus size of 1024 bits. + + The options (if present) consist of comma-separated option + specifications. No spaces are permitted, except within double quotes. + The following option specifications are supported (note that option + keywords are case-insensitive): + + agent-forwarding + Enable authentication agent forwarding previously disabled by the + restrict option. + + cert-authority + Specifies that the listed key is a certification authority (CA) + that is trusted to validate signed certificates for user + authentication. + + Certificates may encode access restrictions similar to these key + options. If both certificate restrictions and key options are + present, the most restrictive union of the two is applied. + + command="command" + Specifies that the command is executed whenever this key is used + for authentication. The command supplied by the user (if any) is + ignored. The command is run on a pty if the client requests a + pty; otherwise it is run without a tty. If an 8-bit clean + channel is required, one must not request a pty or should specify + no-pty. A quote may be included in the command by quoting it + with a backslash. + + This option might be useful to restrict certain public keys to + perform just a specific operation. An example might be a key + that permits remote backups but nothing else. Note that the + client may specify TCP and/or X11 forwarding unless they are + explicitly prohibited, e.g. using the restrict key option. + + The command originally supplied by the client is available in the + SSH_ORIGINAL_COMMAND environment variable. Note that this option + applies to shell, command or subsystem execution. Also note that + this command may be superseded by a sshd_config(5) ForceCommand + directive. + + If a command is specified and a forced-command is embedded in a + certificate used for authentication, then the certificate will be + accepted only if the two commands are identical. + + environment="NAME=value" + Specifies that the string is to be added to the environment when + logging in using this key. Environment variables set this way + override other default environment values. Multiple options of + this type are permitted. Environment processing is disabled by + default and is controlled via the PermitUserEnvironment option. + + expiry-time="timespec" + Specifies a time after which the key will not be accepted. The + time may be specified as a YYYYMMDD date or a YYYYMMDDHHMM[SS] + time in the system time-zone. + + from="pattern-list" + Specifies that in addition to public key authentication, either + the canonical name of the remote host or its IP address must be + present in the comma-separated list of patterns. See PATTERNS in + ssh_config(5) for more information on patterns. + + In addition to the wildcard matching that may be applied to + hostnames or addresses, a from stanza may match IP addresses + using CIDR address/masklen notation. + + The purpose of this option is to optionally increase security: + public key authentication by itself does not trust the network or + name servers or anything (but the key); however, if somebody + somehow steals the key, the key permits an intruder to log in + from anywhere in the world. This additional option makes using a + stolen key more difficult (name servers and/or routers would have + to be compromised in addition to just the key). + + no-agent-forwarding + Forbids authentication agent forwarding when this key is used for + authentication. + + no-port-forwarding + Forbids TCP forwarding when this key is used for authentication. + Any port forward requests by the client will return an error. + This might be used, e.g. in connection with the command option. + + no-pty Prevents tty allocation (a request to allocate a pty will fail). + + no-user-rc + Disables execution of ~/.ssh/rc. + + no-X11-forwarding + Forbids X11 forwarding when this key is used for authentication. + Any X11 forward requests by the client will return an error. + + permitlisten="[host:]port" + Limit remote port forwarding with the ssh(1) -R option such that + it may only listen on the specified host (optional) and port. + IPv6 addresses can be specified by enclosing the address in + square brackets. Multiple permitlisten options may be applied + separated by commas. Hostnames may include wildcards as + described in the PATTERNS section in ssh_config(5). A port + specification of * matches any port. Note that the setting of + GatewayPorts may further restrict listen addresses. Note that + ssh(1) will send a hostname of M-bM-^@M-^\localhostM-bM-^@M-^] if a listen host was + not specified when the forwarding was requested, and that this + name is treated differently to the explicit localhost addresses + M-bM-^@M-^\127.0.0.1M-bM-^@M-^] and M-bM-^@M-^\::1M-bM-^@M-^]. + + permitopen="host:port" + Limit local port forwarding with the ssh(1) -L option such that + it may only connect to the specified host and port. IPv6 + addresses can be specified by enclosing the address in square + brackets. Multiple permitopen options may be applied separated + by commas. No pattern matching is performed on the specified + hostnames, they must be literal domains or addresses. A port + specification of * matches any port. + + port-forwarding + Enable port forwarding previously disabled by the restrict + option. + + principals="principals" + On a cert-authority line, specifies allowed principals for + certificate authentication as a comma-separated list. At least + one name from the list must appear in the certificate's list of + principals for the certificate to be accepted. This option is + ignored for keys that are not marked as trusted certificate + signers using the cert-authority option. + + pty Permits tty allocation previously disabled by the restrict + option. + + restrict + Enable all restrictions, i.e. disable port, agent and X11 + forwarding, as well as disabling PTY allocation and execution of + ~/.ssh/rc. If any future restriction capabilities are added to + authorized_keys files they will be included in this set. + + tunnel="n" + Force a tun(4) device on the server. Without this option, the + next available device will be used if the client requests a + tunnel. + + user-rc + Enables execution of ~/.ssh/rc previously disabled by the + restrict option. + + X11-forwarding + Permits X11 forwarding previously disabled by the restrict + option. + + An example authorized_keys file: + + # Comments allowed at start of line + ssh-rsa AAAAB3Nza...LiPk== user@example.net + from="*.sales.example.net,!pc.sales.example.net" ssh-rsa + AAAAB2...19Q== john@example.net + command="dump /home",no-pty,no-port-forwarding ssh-rsa + AAAAC3...51R== example.net + permitopen="192.0.2.1:80",permitopen="192.0.2.2:25" ssh-rsa + AAAAB5...21S== + permitlisten="localhost:8080",permitopen="localhost:22000" ssh-rsa + AAAAB5...21S== + tunnel="0",command="sh /etc/netstart tun0" ssh-rsa AAAA...== + jane@example.net + restrict,command="uptime" ssh-rsa AAAA1C8...32Tv== + user@example.net + restrict,pty,command="nethack" ssh-rsa AAAA1f8...IrrC5== + user@example.net + +SSH_KNOWN_HOSTS FILE FORMAT + The /etc/ssh/ssh_known_hosts and ~/.ssh/known_hosts files contain host + public keys for all known hosts. The global file should be prepared by + the administrator (optional), and the per-user file is maintained + automatically: whenever the user connects to an unknown host, its key is + added to the per-user file. + + Each line in these files contains the following fields: markers + (optional), hostnames, keytype, base64-encoded key, comment. The fields + are separated by spaces. + + The marker is optional, but if it is present then it must be one of + M-bM-^@M-^\@cert-authorityM-bM-^@M-^], to indicate that the line contains a certification + authority (CA) key, or M-bM-^@M-^\@revokedM-bM-^@M-^], to indicate that the key contained on + the line is revoked and must not ever be accepted. Only one marker + should be used on a key line. + + Hostnames is a comma-separated list of patterns (M-bM-^@M-^X*M-bM-^@M-^Y and M-bM-^@M-^X?M-bM-^@M-^Y act as + wildcards); each pattern in turn is matched against the host name. When + sshd is authenticating a client, such as when using + HostbasedAuthentication, this will be the canonical client host name. + When ssh(1) is authenticating a server, this will be the host name given + by the user, the value of the ssh(1) HostkeyAlias if it was specified, or + the canonical server hostname if the ssh(1) CanonicalizeHostname option + was used. + + A pattern may also be preceded by M-bM-^@M-^X!M-bM-^@M-^Y to indicate negation: if the host + name matches a negated pattern, it is not accepted (by that line) even if + it matched another pattern on the line. A hostname or address may + optionally be enclosed within M-bM-^@M-^X[M-bM-^@M-^Y and M-bM-^@M-^X]M-bM-^@M-^Y brackets then followed by M-bM-^@M-^X:M-bM-^@M-^Y + and a non-standard port number. + + Alternately, hostnames may be stored in a hashed form which hides host + names and addresses should the file's contents be disclosed. Hashed + hostnames start with a M-bM-^@M-^X|M-bM-^@M-^Y character. Only one hashed hostname may + appear on a single line and none of the above negation or wildcard + operators may be applied. + + The keytype and base64-encoded key are taken directly from the host key; + they can be obtained, for example, from /etc/ssh/ssh_host_rsa_key.pub. + The optional comment field continues to the end of the line, and is not + used. + + Lines starting with M-bM-^@M-^X#M-bM-^@M-^Y and empty lines are ignored as comments. + + When performing host authentication, authentication is accepted if any + matching line has the proper key; either one that matches exactly or, if + the server has presented a certificate for authentication, the key of the + certification authority that signed the certificate. For a key to be + trusted as a certification authority, it must use the M-bM-^@M-^\@cert-authorityM-bM-^@M-^] + marker described above. + + The known hosts file also provides a facility to mark keys as revoked, + for example when it is known that the associated private key has been + stolen. Revoked keys are specified by including the M-bM-^@M-^\@revokedM-bM-^@M-^] marker at + the beginning of the key line, and are never accepted for authentication + or as certification authorities, but instead will produce a warning from + ssh(1) when they are encountered. + + It is permissible (but not recommended) to have several lines or + different host keys for the same names. This will inevitably happen when + short forms of host names from different domains are put in the file. It + is possible that the files contain conflicting information; + authentication is accepted if valid information can be found from either + file. + + Note that the lines in these files are typically hundreds of characters + long, and you definitely don't want to type in the host keys by hand. + Rather, generate them by a script, ssh-keyscan(1) or by taking, for + example, /etc/ssh/ssh_host_rsa_key.pub and adding the host names at the + front. ssh-keygen(1) also offers some basic automated editing for + ~/.ssh/known_hosts including removing hosts matching a host name and + converting all host names to their hashed representations. + + An example ssh_known_hosts file: + + # Comments allowed at start of line + closenet,...,192.0.2.53 1024 37 159...93 closenet.example.net + cvs.example.net,192.0.2.10 ssh-rsa AAAA1234.....= + # A hashed hostname + |1|JfKTdBh7rNbXkVAQCRp4OQoPfmI=|USECr3SWf1JUPsms5AqfD5QfxkM= ssh-rsa + AAAA1234.....= + # A revoked key + @revoked * ssh-rsa AAAAB5W... + # A CA key, accepted for any host in *.mydomain.com or *.mydomain.org + @cert-authority *.mydomain.org,*.mydomain.com ssh-rsa AAAAB5W... + +FILES + ~/.hushlogin + This file is used to suppress printing the last login time and + /etc/motd, if PrintLastLog and PrintMotd, respectively, are + enabled. It does not suppress printing of the banner specified + by Banner. + + ~/.rhosts + This file is used for host-based authentication (see ssh(1) for + more information). On some machines this file may need to be + world-readable if the user's home directory is on an NFS + partition, because sshd reads it as root. Additionally, this + file must be owned by the user, and must not have write + permissions for anyone else. The recommended permission for most + machines is read/write for the user, and not accessible by + others. + + ~/.shosts + This file is used in exactly the same way as .rhosts, but allows + host-based authentication without permitting login with + rlogin/rsh. + + ~/.ssh/ + This directory is the default location for all user-specific + configuration and authentication information. There is no + general requirement to keep the entire contents of this directory + secret, but the recommended permissions are read/write/execute + for the user, and not accessible by others. + + ~/.ssh/authorized_keys + Lists the public keys (DSA, ECDSA, Ed25519, RSA) that can be used + for logging in as this user. The format of this file is + described above. The content of the file is not highly + sensitive, but the recommended permissions are read/write for the + user, and not accessible by others. + + If this file, the ~/.ssh directory, or the user's home directory + are writable by other users, then the file could be modified or + replaced by unauthorized users. In this case, sshd will not + allow it to be used unless the StrictModes option has been set to + M-bM-^@M-^\noM-bM-^@M-^]. + + ~/.ssh/environment + This file is read into the environment at login (if it exists). + It can only contain empty lines, comment lines (that start with + M-bM-^@M-^X#M-bM-^@M-^Y), and assignment lines of the form name=value. The file + should be writable only by the user; it need not be readable by + anyone else. Environment processing is disabled by default and + is controlled via the PermitUserEnvironment option. + + ~/.ssh/known_hosts + Contains a list of host keys for all hosts the user has logged + into that are not already in the systemwide list of known host + keys. The format of this file is described above. This file + should be writable only by root/the owner and can, but need not + be, world-readable. + + ~/.ssh/rc + Contains initialization routines to be run before the user's home + directory becomes accessible. This file should be writable only + by the user, and need not be readable by anyone else. + + /etc/hosts.equiv + This file is for host-based authentication (see ssh(1)). It + should only be writable by root. + + /etc/moduli + Contains Diffie-Hellman groups used for the "Diffie-Hellman Group + Exchange" key exchange method. The file format is described in + moduli(5). If no usable groups are found in this file then fixed + internal groups will be used. + + /etc/motd + See motd(5). + + /etc/nologin + If this file exists, sshd refuses to let anyone except root log + in. The contents of the file are displayed to anyone trying to + log in, and non-root connections are refused. The file should be + world-readable. + + /etc/shosts.equiv + This file is used in exactly the same way as hosts.equiv, but + allows host-based authentication without permitting login with + rlogin/rsh. + + /etc/ssh/ssh_host_ecdsa_key + /etc/ssh/ssh_host_ed25519_key + /etc/ssh/ssh_host_rsa_key + These files contain the private parts of the host keys. These + files should only be owned by root, readable only by root, and + not accessible to others. Note that sshd does not start if these + files are group/world-accessible. + + /etc/ssh/ssh_host_ecdsa_key.pub + /etc/ssh/ssh_host_ed25519_key.pub + /etc/ssh/ssh_host_rsa_key.pub + These files contain the public parts of the host keys. These + files should be world-readable but writable only by root. Their + contents should match the respective private parts. These files + are not really used for anything; they are provided for the + convenience of the user so their contents can be copied to known + hosts files. These files are created using ssh-keygen(1). + + /etc/ssh/ssh_known_hosts + Systemwide list of known host keys. This file should be prepared + by the system administrator to contain the public host keys of + all machines in the organization. The format of this file is + described above. This file should be writable only by root/the + owner and should be world-readable. + + /etc/ssh/sshd_config + Contains configuration data for sshd. The file format and + configuration options are described in sshd_config(5). + + /etc/ssh/sshrc + Similar to ~/.ssh/rc, it can be used to specify machine-specific + login-time initializations globally. This file should be + writable only by root, and should be world-readable. + + /var/empty + chroot(2) directory used by sshd during privilege separation in + the pre-authentication phase. The directory should not contain + any files and must be owned by root and not group or world- + writable. + + /var/run/sshd.pid + Contains the process ID of the sshd listening for connections (if + there are several daemons running concurrently for different + ports, this contains the process ID of the one started last). + The content of this file is not sensitive; it can be world- + readable. + +SEE ALSO + scp(1), sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), + ssh-keyscan(1), chroot(2), login.conf(5), moduli(5), sshd_config(5), + inetd(8), sftp-server(8) + +AUTHORS + OpenSSH is a derivative of the original and free ssh 1.2.12 release by + Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo + de Raadt and Dug Song removed many bugs, re-added newer features and + created OpenSSH. Markus Friedl contributed the support for SSH protocol + versions 1.5 and 2.0. Niels Provos and Markus Friedl contributed support + for privilege separation. + +OpenBSD 6.4 July 22, 2018 OpenBSD 6.4 |