summaryrefslogtreecommitdiffstats
path: root/contrib/hpux
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--contrib/hpux/README45
-rw-r--r--contrib/hpux/egd15
-rwxr-xr-xcontrib/hpux/egd.rc98
-rw-r--r--contrib/hpux/sshd5
-rwxr-xr-xcontrib/hpux/sshd.rc90
5 files changed, 253 insertions, 0 deletions
diff --git a/contrib/hpux/README b/contrib/hpux/README
new file mode 100644
index 0000000..f8bfa84
--- /dev/null
+++ b/contrib/hpux/README
@@ -0,0 +1,45 @@
+README for OpenSSH HP-UX contrib files
+Kevin Steves <stevesk@pobox.com>
+
+sshd: configuration file for sshd.rc
+sshd.rc: SSH startup script
+egd: configuration file for egd.rc
+egd.rc: EGD (entropy gathering daemon) startup script
+
+To install:
+
+sshd.rc:
+
+o Verify paths in sshd.rc match your local installation
+ (WHAT_PATH and WHAT_PID)
+o Customize sshd if needed (SSHD_ARGS)
+o Install:
+
+ # cp sshd /etc/rc.config.d
+ # chmod 444 /etc/rc.config.d/sshd
+ # cp sshd.rc /sbin/init.d
+ # chmod 555 /sbin/init.d/sshd.rc
+ # ln -s /sbin/init.d/sshd.rc /sbin/rc1.d/K100sshd
+ # ln -s /sbin/init.d/sshd.rc /sbin/rc2.d/S900sshd
+
+egd.rc:
+
+o Verify egd.pl path in egd.rc matches your local installation
+ (WHAT_PATH)
+o Customize egd if needed (EGD_ARGS and EGD_LOG)
+o Add pseudo account:
+
+ # groupadd egd
+ # useradd -g egd egd
+ # mkdir -p /etc/opt/egd
+ # chown egd:egd /etc/opt/egd
+ # chmod 711 /etc/opt/egd
+
+o Install:
+
+ # cp egd /etc/rc.config.d
+ # chmod 444 /etc/rc.config.d/egd
+ # cp egd.rc /sbin/init.d
+ # chmod 555 /sbin/init.d/egd.rc
+ # ln -s /sbin/init.d/egd.rc /sbin/rc1.d/K600egd
+ # ln -s /sbin/init.d/egd.rc /sbin/rc2.d/S400egd
diff --git a/contrib/hpux/egd b/contrib/hpux/egd
new file mode 100644
index 0000000..21af0bd
--- /dev/null
+++ b/contrib/hpux/egd
@@ -0,0 +1,15 @@
+# EGD_START: Set to 1 to start entropy gathering daemon
+# EGD_ARGS: Command line arguments to pass to egd
+# EGD_LOG: EGD stdout and stderr log file (default /etc/opt/egd/egd.log)
+#
+# To configure the egd environment:
+
+# groupadd egd
+# useradd -g egd egd
+# mkdir -p /etc/opt/egd
+# chown egd:egd /etc/opt/egd
+# chmod 711 /etc/opt/egd
+
+EGD_START=1
+EGD_ARGS='/etc/opt/egd/entropy'
+EGD_LOG=
diff --git a/contrib/hpux/egd.rc b/contrib/hpux/egd.rc
new file mode 100755
index 0000000..919dea7
--- /dev/null
+++ b/contrib/hpux/egd.rc
@@ -0,0 +1,98 @@
+#!/sbin/sh
+
+#
+# egd.rc: EGD start-up and shutdown script
+#
+
+# Allowed exit values:
+# 0 = success; causes "OK" to show up in checklist.
+# 1 = failure; causes "FAIL" to show up in checklist.
+# 2 = skip; causes "N/A" to show up in the checklist.
+# Use this value if execution of this script is overridden
+# by the use of a control variable, or if this script is not
+# appropriate to execute for some other reason.
+# 3 = reboot; causes the system to be rebooted after execution.
+
+# Input and output:
+# stdin is redirected from /dev/null
+#
+# stdout and stderr are redirected to the /etc/rc.log file
+# during checklist mode, or to the console in raw mode.
+
+umask 022
+
+PATH=/usr/sbin:/usr/bin:/sbin
+export PATH
+
+WHAT='EGD (entropy gathering daemon)'
+WHAT_PATH=/opt/perl/bin/egd.pl
+WHAT_CONFIG=/etc/rc.config.d/egd
+WHAT_LOG=/etc/opt/egd/egd.log
+
+# NOTE: If your script executes in run state 0 or state 1, then /usr might
+# not be available. Do not attempt to access commands or files in
+# /usr unless your script executes in run state 2 or greater. Other
+# file systems typically not mounted until run state 2 include /var
+# and /opt.
+
+rval=0
+
+# Check the exit value of a command run by this script. If non-zero, the
+# exit code is echoed to the log file and the return value of this script
+# is set to indicate failure.
+
+set_return() {
+ x=$?
+ if [ $x -ne 0 ]; then
+ echo "EXIT CODE: $x"
+ rval=1 # script FAILed
+ fi
+}
+
+case $1 in
+'start_msg')
+ echo "Starting $WHAT"
+ ;;
+
+'stop_msg')
+ echo "Stopping $WHAT"
+ ;;
+
+'start')
+ if [ -f $WHAT_CONFIG ] ; then
+ . $WHAT_CONFIG
+ else
+ echo "ERROR: $WHAT_CONFIG defaults file MISSING"
+ fi
+
+
+ if [ "$EGD_START" -eq 1 -a -x $WHAT_PATH ]; then
+ EGD_LOG=${EGD_LOG:-$WHAT_LOG}
+ su egd -c "nohup $WHAT_PATH $EGD_ARGS >$EGD_LOG 2>&1" &&
+ echo $WHAT started
+ set_return
+ else
+ rval=2
+ fi
+ ;;
+
+'stop')
+ pid=`ps -fuegd | awk '$1 == "egd" { print $2 }'`
+ if [ "X$pid" != "X" ]; then
+ if kill "$pid"; then
+ echo "$WHAT stopped"
+ else
+ rval=1
+ echo "Unable to stop $WHAT"
+ fi
+ fi
+ set_return
+ ;;
+
+*)
+ echo "usage: $0 {start|stop|start_msg|stop_msg}"
+ rval=1
+ ;;
+esac
+
+exit $rval
diff --git a/contrib/hpux/sshd b/contrib/hpux/sshd
new file mode 100644
index 0000000..8eb5e92
--- /dev/null
+++ b/contrib/hpux/sshd
@@ -0,0 +1,5 @@
+# SSHD_START: Set to 1 to start SSH daemon
+# SSHD_ARGS: Command line arguments to pass to sshd
+#
+SSHD_START=1
+SSHD_ARGS=
diff --git a/contrib/hpux/sshd.rc b/contrib/hpux/sshd.rc
new file mode 100755
index 0000000..f9a1099
--- /dev/null
+++ b/contrib/hpux/sshd.rc
@@ -0,0 +1,90 @@
+#!/sbin/sh
+
+#
+# sshd.rc: SSH daemon start-up and shutdown script
+#
+
+# Allowed exit values:
+# 0 = success; causes "OK" to show up in checklist.
+# 1 = failure; causes "FAIL" to show up in checklist.
+# 2 = skip; causes "N/A" to show up in the checklist.
+# Use this value if execution of this script is overridden
+# by the use of a control variable, or if this script is not
+# appropriate to execute for some other reason.
+# 3 = reboot; causes the system to be rebooted after execution.
+
+# Input and output:
+# stdin is redirected from /dev/null
+#
+# stdout and stderr are redirected to the /etc/rc.log file
+# during checklist mode, or to the console in raw mode.
+
+PATH=/usr/sbin:/usr/bin:/sbin
+export PATH
+
+WHAT='OpenSSH'
+WHAT_PATH=/opt/openssh/sbin/sshd
+WHAT_PID=/var/run/sshd.pid
+WHAT_CONFIG=/etc/rc.config.d/sshd
+
+# NOTE: If your script executes in run state 0 or state 1, then /usr might
+# not be available. Do not attempt to access commands or files in
+# /usr unless your script executes in run state 2 or greater. Other
+# file systems typically not mounted until run state 2 include /var
+# and /opt.
+
+rval=0
+
+# Check the exit value of a command run by this script. If non-zero, the
+# exit code is echoed to the log file and the return value of this script
+# is set to indicate failure.
+
+set_return() {
+ x=$?
+ if [ $x -ne 0 ]; then
+ echo "EXIT CODE: $x"
+ rval=1 # script FAILed
+ fi
+}
+
+case $1 in
+'start_msg')
+ echo "Starting $WHAT"
+ ;;
+
+'stop_msg')
+ echo "Stopping $WHAT"
+ ;;
+
+'start')
+ if [ -f $WHAT_CONFIG ] ; then
+ . $WHAT_CONFIG
+ else
+ echo "ERROR: $WHAT_CONFIG defaults file MISSING"
+ fi
+
+ if [ "$SSHD_START" -eq 1 -a -x "$WHAT_PATH" ]; then
+ $WHAT_PATH $SSHD_ARGS && echo "$WHAT started"
+ set_return
+ else
+ rval=2
+ fi
+ ;;
+
+'stop')
+ if kill `cat $WHAT_PID`; then
+ echo "$WHAT stopped"
+ else
+ rval=1
+ echo "Unable to stop $WHAT"
+ fi
+ set_return
+ ;;
+
+*)
+ echo "usage: $0 {start|stop|start_msg|stop_msg}"
+ rval=1
+ ;;
+esac
+
+exit $rval