summaryrefslogtreecommitdiffstats
path: root/modules/pam_sepermit
diff options
context:
space:
mode:
Diffstat (limited to 'modules/pam_sepermit')
-rw-r--r--modules/pam_sepermit/Makefile.am44
-rw-r--r--modules/pam_sepermit/Makefile.in1202
-rw-r--r--modules/pam_sepermit/README48
-rw-r--r--modules/pam_sepermit/README.xml41
-rw-r--r--modules/pam_sepermit/pam_sepermit.8130
-rw-r--r--modules/pam_sepermit/pam_sepermit.8.xml194
-rw-r--r--modules/pam_sepermit/pam_sepermit.c445
-rw-r--r--modules/pam_sepermit/sepermit.conf11
-rw-r--r--modules/pam_sepermit/sepermit.conf.5117
-rw-r--r--modules/pam_sepermit/sepermit.conf.5.xml110
-rwxr-xr-xmodules/pam_sepermit/tst-pam_sepermit2
11 files changed, 2344 insertions, 0 deletions
diff --git a/modules/pam_sepermit/Makefile.am b/modules/pam_sepermit/Makefile.am
new file mode 100644
index 0000000..bc82275
--- /dev/null
+++ b/modules/pam_sepermit/Makefile.am
@@ -0,0 +1,44 @@
+#
+# Copyright (c) 2005, 2006, 2007 Thorsten Kukuk <kukuk@thkukuk.de>
+# Copyright (c) 2008, 2009 Red Hat, Inc.
+#
+
+CLEANFILES = *~
+MAINTAINERCLEANFILES = $(MANS) README
+
+EXTRA_DIST = README $(XMLS) pam_sepermit.8 sepermit.conf sepermit.conf.5 tst-pam_sepermit
+
+if HAVE_LIBSELINUX
+ TESTS = tst-pam_sepermit
+ man_MANS = pam_sepermit.8 sepermit.conf.5
+endif
+
+XMLS = README.xml pam_sepermit.8.xml sepermit.conf.5.xml
+
+securelibdir = $(SECUREDIR)
+secureconfdir = $(SCONFIGDIR)
+sepermitlockdir = ${localstatedir}/run/sepermit
+
+AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include \
+ -I$(top_srcdir)/libpam_misc/include \
+ -D SEPERMIT_CONF_FILE=\"$(SCONFIGDIR)/sepermit.conf\" \
+ -D SEPERMIT_LOCKDIR=\"$(sepermitlockdir)\"
+
+pam_sepermit_la_LIBADD = $(top_builddir)/libpam/libpam.la @LIBSELINUX@
+pam_sepermit_la_LDFLAGS = -no-undefined -avoid-version -module
+if HAVE_VERSIONING
+ pam_sepermit_la_LDFLAGS += -Wl,--version-script=$(srcdir)/../modules.map
+endif
+
+if HAVE_LIBSELINUX
+ secureconf_DATA = sepermit.conf
+ securelib_LTLIBRARIES = pam_sepermit.la
+
+install-data-local:
+ mkdir -p $(DESTDIR)$(sepermitlockdir)
+endif
+if ENABLE_REGENERATE_MAN
+noinst_DATA = README pam_sepermit.8 sepermit.conf.5
+README: pam_sepermit.8.xml
+-include $(top_srcdir)/Make.xml.rules
+endif
diff --git a/modules/pam_sepermit/Makefile.in b/modules/pam_sepermit/Makefile.in
new file mode 100644
index 0000000..0e530a9
--- /dev/null
+++ b/modules/pam_sepermit/Makefile.in
@@ -0,0 +1,1202 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright (c) 2005, 2006, 2007 Thorsten Kukuk <kukuk@thkukuk.de>
+# Copyright (c) 2008, 2009 Red Hat, Inc.
+#
+
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@HAVE_VERSIONING_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/../modules.map
+subdir = modules/pam_sepermit
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/build-aux/depcomp \
+ $(top_srcdir)/build-aux/test-driver README
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
+ $(top_srcdir)/m4/japhar_grep_cflags.m4 \
+ $(top_srcdir)/m4/jh_path_xml_catalog.m4 \
+ $(top_srcdir)/m4/ld-O1.m4 $(top_srcdir)/m4/ld-as-needed.m4 \
+ $(top_srcdir)/m4/ld-no-undefined.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/libprelude.m4 $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(securelibdir)" "$(DESTDIR)$(man5dir)" \
+ "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(secureconfdir)"
+LTLIBRARIES = $(securelib_LTLIBRARIES)
+pam_sepermit_la_DEPENDENCIES = $(top_builddir)/libpam/libpam.la
+pam_sepermit_la_SOURCES = pam_sepermit.c
+pam_sepermit_la_OBJECTS = pam_sepermit.lo
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+pam_sepermit_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+ $(AM_CFLAGS) $(CFLAGS) $(pam_sepermit_la_LDFLAGS) $(LDFLAGS) \
+ -o $@
+@HAVE_LIBSELINUX_TRUE@am_pam_sepermit_la_rpath = -rpath \
+@HAVE_LIBSELINUX_TRUE@ $(securelibdir)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = pam_sepermit.c
+DIST_SOURCES = pam_sepermit.c
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+man5dir = $(mandir)/man5
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man_MANS)
+DATA = $(noinst_DATA) $(secureconf_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+ mgn= red= grn= lgn= blu= brg= std=; \
+ am__color_tests=no
+am__tty_colors = { \
+ $(am__tty_colors_dummy); \
+ if test "X$(AM_COLOR_TESTS)" = Xno; then \
+ am__color_tests=no; \
+ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+ am__color_tests=yes; \
+ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+ am__color_tests=yes; \
+ fi; \
+ if test $$am__color_tests = yes; then \
+ red=''; \
+ grn=''; \
+ lgn=''; \
+ blu=''; \
+ mgn=''; \
+ brg=''; \
+ std=''; \
+ fi; \
+}
+am__recheck_rx = ^[ ]*:recheck:[ ]*
+am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
+am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+ recheck = 1; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ { \
+ if ((getline line2 < ($$0 ".log")) < 0) \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+ { \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+ { \
+ break; \
+ } \
+ }; \
+ if (recheck) \
+ print $$0; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+ print "fatal: making $@: " msg | "cat >&2"; \
+ exit 1; \
+} \
+function rst_section(header) \
+{ \
+ print header; \
+ len = length(header); \
+ for (i = 1; i <= len; i = i + 1) \
+ printf "="; \
+ printf "\n\n"; \
+} \
+{ \
+ copy_in_global_log = 1; \
+ global_test_result = "RUN"; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".trs"); \
+ if (line ~ /$(am__global_test_result_rx)/) \
+ { \
+ sub("$(am__global_test_result_rx)", "", line); \
+ sub("[ ]*$$", "", line); \
+ global_test_result = line; \
+ } \
+ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+ copy_in_global_log = 0; \
+ }; \
+ if (copy_in_global_log) \
+ { \
+ rst_section(global_test_result ": " $$0); \
+ while ((rc = (getline line < ($$0 ".log"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".log"); \
+ print line; \
+ }; \
+ printf "\n"; \
+ }; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+ --color-tests "$$am__color_tests" \
+ --enable-hard-errors "$$am__enable_hard_errors" \
+ --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test. Creates the
+# directory for the log if needed. Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log. Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup); \
+$(am__vpath_adj_setup) $(am__vpath_adj) \
+$(am__tty_colors); \
+srcdir=$(srcdir); export srcdir; \
+case "$@" in \
+ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
+ *) am__odir=.;; \
+esac; \
+test "x$$am__odir" = x"." || test -d "$$am__odir" \
+ || $(MKDIR_P) "$$am__odir" || exit $$?; \
+if test -f "./$$f"; then dir=./; \
+elif test -f "$$f"; then dir=; \
+else dir="$(srcdir)/"; fi; \
+tst=$$dir$$f; log='$@'; \
+if test -n '$(DISABLE_HARD_ERRORS)'; then \
+ am__enable_hard_errors=no; \
+else \
+ am__enable_hard_errors=yes; \
+fi; \
+case " $(XFAIL_TESTS) " in \
+ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
+ am__expect_failure=yes;; \
+ *) \
+ am__expect_failure=no;; \
+esac; \
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed). The result is saved in the shell variable
+# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+ bases='$(TEST_LOGS)'; \
+ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+ bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+ case '$@' in \
+ */*) \
+ case '$*' in \
+ */*) b='$*';; \
+ *) b=`echo '$@' | sed 's/\.log$$//'`; \
+ esac;; \
+ *) \
+ b='$*';; \
+ esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+ $(TEST_LOG_FLAGS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BROWSER = @BROWSER@
+BUILD_CFLAGS = @BUILD_CFLAGS@
+BUILD_CPPFLAGS = @BUILD_CPPFLAGS@
+BUILD_LDFLAGS = @BUILD_LDFLAGS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FO2PDF = @FO2PDF@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_KEY_MANAGEMENT = @HAVE_KEY_MANAGEMENT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBAUDIT = @LIBAUDIT@
+LIBCRACK = @LIBCRACK@
+LIBCRYPT = @LIBCRYPT@
+LIBDB = @LIBDB@
+LIBDL = @LIBDL@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBPRELUDE_CFLAGS = @LIBPRELUDE_CFLAGS@
+LIBPRELUDE_CONFIG = @LIBPRELUDE_CONFIG@
+LIBPRELUDE_CONFIG_PREFIX = @LIBPRELUDE_CONFIG_PREFIX@
+LIBPRELUDE_LDFLAGS = @LIBPRELUDE_LDFLAGS@
+LIBPRELUDE_LIBS = @LIBPRELUDE_LIBS@
+LIBPRELUDE_PREFIX = @LIBPRELUDE_PREFIX@
+LIBPRELUDE_PTHREAD_CFLAGS = @LIBPRELUDE_PTHREAD_CFLAGS@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NIS_CFLAGS = @NIS_CFLAGS@
+NIS_LIBS = @NIS_LIBS@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NSL_CFLAGS = @NSL_CFLAGS@
+NSL_LIBS = @NSL_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PIE_CFLAGS = @PIE_CFLAGS@
+PIE_LDFLAGS = @PIE_LDFLAGS@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SCONFIGDIR = @SCONFIGDIR@
+SECUREDIR = @SECUREDIR@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TIRPC_CFLAGS = @TIRPC_CFLAGS@
+TIRPC_LIBS = @TIRPC_LIBS@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+XMLCATALOG = @XMLCATALOG@
+XMLLINT = @XMLLINT@
+XML_CATALOG_FILE = @XML_CATALOG_FILE@
+XSLTPROC = @XSLTPROC@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libc_cv_fpie = @libc_cv_fpie@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pam_cv_ld_O1 = @pam_cv_ld_O1@
+pam_cv_ld_as_needed = @pam_cv_ld_as_needed@
+pam_cv_ld_no_undefined = @pam_cv_ld_no_undefined@
+pam_xauth_path = @pam_xauth_path@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+CLEANFILES = *~
+MAINTAINERCLEANFILES = $(MANS) README
+EXTRA_DIST = README $(XMLS) pam_sepermit.8 sepermit.conf sepermit.conf.5 tst-pam_sepermit
+@HAVE_LIBSELINUX_TRUE@TESTS = tst-pam_sepermit
+@HAVE_LIBSELINUX_TRUE@man_MANS = pam_sepermit.8 sepermit.conf.5
+XMLS = README.xml pam_sepermit.8.xml sepermit.conf.5.xml
+securelibdir = $(SECUREDIR)
+secureconfdir = $(SCONFIGDIR)
+sepermitlockdir = ${localstatedir}/run/sepermit
+AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include \
+ -I$(top_srcdir)/libpam_misc/include \
+ -D SEPERMIT_CONF_FILE=\"$(SCONFIGDIR)/sepermit.conf\" \
+ -D SEPERMIT_LOCKDIR=\"$(sepermitlockdir)\"
+
+pam_sepermit_la_LIBADD = $(top_builddir)/libpam/libpam.la @LIBSELINUX@
+pam_sepermit_la_LDFLAGS = -no-undefined -avoid-version -module \
+ $(am__append_1)
+@HAVE_LIBSELINUX_TRUE@secureconf_DATA = sepermit.conf
+@HAVE_LIBSELINUX_TRUE@securelib_LTLIBRARIES = pam_sepermit.la
+@ENABLE_REGENERATE_MAN_TRUE@noinst_DATA = README pam_sepermit.8 sepermit.conf.5
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu modules/pam_sepermit/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu modules/pam_sepermit/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+install-securelibLTLIBRARIES: $(securelib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ @list='$(securelib_LTLIBRARIES)'; test -n "$(securelibdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(securelibdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(securelibdir)" || exit 1; \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(securelibdir)'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(securelibdir)"; \
+ }
+
+uninstall-securelibLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(securelib_LTLIBRARIES)'; test -n "$(securelibdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(securelibdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(securelibdir)/$$f"; \
+ done
+
+clean-securelibLTLIBRARIES:
+ -test -z "$(securelib_LTLIBRARIES)" || rm -f $(securelib_LTLIBRARIES)
+ @list='$(securelib_LTLIBRARIES)'; \
+ locs=`for p in $$list; do echo $$p; done | \
+ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+ sort -u`; \
+ test -z "$$locs" || { \
+ echo rm -f $${locs}; \
+ rm -f $${locs}; \
+ }
+
+pam_sepermit.la: $(pam_sepermit_la_OBJECTS) $(pam_sepermit_la_DEPENDENCIES) $(EXTRA_pam_sepermit_la_DEPENDENCIES)
+ $(AM_V_CCLD)$(pam_sepermit_la_LINK) $(am_pam_sepermit_la_rpath) $(pam_sepermit_la_OBJECTS) $(pam_sepermit_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pam_sepermit.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man5: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man5dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.5[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man5:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man5dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.5[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+install-man8: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man8dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.8[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man8:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.8[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+install-secureconfDATA: $(secureconf_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(secureconf_DATA)'; test -n "$(secureconfdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(secureconfdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(secureconfdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(secureconfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(secureconfdir)" || exit $$?; \
+ done
+
+uninstall-secureconfDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(secureconf_DATA)'; test -n "$(secureconfdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(secureconfdir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+ rm -f $< $@
+ $(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+ @:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+ @$(am__set_TESTS_bases); \
+ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+ redo_bases=`for i in $$bases; do \
+ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+ done`; \
+ if test -n "$$redo_bases"; then \
+ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+ if $(am__make_dryrun); then :; else \
+ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+ fi; \
+ fi; \
+ if test -n "$$am__remaking_logs"; then \
+ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+ "recursion detected" >&2; \
+ else \
+ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+ fi; \
+ if $(am__make_dryrun); then :; else \
+ st=0; \
+ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+ for i in $$redo_bases; do \
+ test -f $$i.trs && test -r $$i.trs \
+ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+ test -f $$i.log && test -r $$i.log \
+ || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+ done; \
+ test $$st -eq 0 || exit 1; \
+ fi
+ @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+ ws='[ ]'; \
+ results=`for b in $$bases; do echo $$b.trs; done`; \
+ test -n "$$results" || results=/dev/null; \
+ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
+ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
+ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
+ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
+ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+ if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+ success=true; \
+ else \
+ success=false; \
+ fi; \
+ br='==================='; br=$$br$$br$$br$$br; \
+ result_count () \
+ { \
+ if test x"$$1" = x"--maybe-color"; then \
+ maybe_colorize=yes; \
+ elif test x"$$1" = x"--no-color"; then \
+ maybe_colorize=no; \
+ else \
+ echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+ fi; \
+ shift; \
+ desc=$$1 count=$$2; \
+ if test $$maybe_colorize = yes && test $$count -gt 0; then \
+ color_start=$$3 color_end=$$std; \
+ else \
+ color_start= color_end=; \
+ fi; \
+ echo "$${color_start}# $$desc $$count$${color_end}"; \
+ }; \
+ create_testsuite_report () \
+ { \
+ result_count $$1 "TOTAL:" $$all "$$brg"; \
+ result_count $$1 "PASS: " $$pass "$$grn"; \
+ result_count $$1 "SKIP: " $$skip "$$blu"; \
+ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+ result_count $$1 "FAIL: " $$fail "$$red"; \
+ result_count $$1 "XPASS:" $$xpass "$$red"; \
+ result_count $$1 "ERROR:" $$error "$$mgn"; \
+ }; \
+ { \
+ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
+ $(am__rst_title); \
+ create_testsuite_report --no-color; \
+ echo; \
+ echo ".. contents:: :depth: 2"; \
+ echo; \
+ for b in $$bases; do echo $$b; done \
+ | $(am__create_global_log); \
+ } >$(TEST_SUITE_LOG).tmp || exit 1; \
+ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
+ if $$success; then \
+ col="$$grn"; \
+ else \
+ col="$$red"; \
+ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
+ fi; \
+ echo "$${col}$$br$${std}"; \
+ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
+ echo "$${col}$$br$${std}"; \
+ create_testsuite_report --maybe-color; \
+ echo "$$col$$br$$std"; \
+ if $$success; then :; else \
+ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
+ if test -n "$(PACKAGE_BUGREPORT)"; then \
+ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
+ fi; \
+ echo "$$col$$br$$std"; \
+ fi; \
+ $$success || exit 1
+
+check-TESTS:
+ @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
+ @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+ exit $$?;
+recheck: all
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ bases=`for i in $$bases; do echo $$i; done \
+ | $(am__list_recheck_tests)` || exit 1; \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ log_list=`echo $$log_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+ am__force_recheck=am--force-recheck \
+ TEST_LOGS="$$log_list"; \
+ exit $$?
+tst-pam_sepermit.log: tst-pam_sepermit
+ @p='tst-pam_sepermit'; \
+ b='tst-pam_sepermit'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+ @p='$<'; \
+ $(am__set_b); \
+ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@ @p='$<'; \
+@am__EXEEXT_TRUE@ $(am__set_b); \
+@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(MANS) $(DATA)
+installdirs:
+ for dir in "$(DESTDIR)$(securelibdir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(secureconfdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+ -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+ -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+ -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+@HAVE_LIBSELINUX_FALSE@install-data-local:
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-securelibLTLIBRARIES \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-man install-secureconfDATA \
+ install-securelibLTLIBRARIES
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man5 install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-secureconfDATA \
+ uninstall-securelibLTLIBRARIES
+
+uninstall-man: uninstall-man5 uninstall-man8
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-TESTS check-am clean \
+ clean-generic clean-libtool clean-securelibLTLIBRARIES \
+ cscopelist-am ctags ctags-am distclean distclean-compile \
+ distclean-generic distclean-libtool distclean-tags distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-data-local install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man5 install-man8 install-pdf install-pdf-am \
+ install-ps install-ps-am install-secureconfDATA \
+ install-securelibLTLIBRARIES install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ recheck tags tags-am uninstall uninstall-am uninstall-man \
+ uninstall-man5 uninstall-man8 uninstall-secureconfDATA \
+ uninstall-securelibLTLIBRARIES
+
+
+@HAVE_LIBSELINUX_TRUE@install-data-local:
+@HAVE_LIBSELINUX_TRUE@ mkdir -p $(DESTDIR)$(sepermitlockdir)
+@ENABLE_REGENERATE_MAN_TRUE@README: pam_sepermit.8.xml
+@ENABLE_REGENERATE_MAN_TRUE@-include $(top_srcdir)/Make.xml.rules
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/modules/pam_sepermit/README b/modules/pam_sepermit/README
new file mode 100644
index 0000000..cd697bb
--- /dev/null
+++ b/modules/pam_sepermit/README
@@ -0,0 +1,48 @@
+pam_sepermit — PAM module to allow/deny login depending on SELinux enforcement
+state
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+DESCRIPTION
+
+The pam_sepermit module allows or denies login depending on SELinux enforcement
+state.
+
+When the user which is logging in matches an entry in the config file he is
+allowed access only when the SELinux is in enforcing mode. Otherwise he is
+denied access. For users not matching any entry in the config file the
+pam_sepermit module returns PAM_IGNORE return value.
+
+The config file contains a list of user names one per line with optional
+arguments. If the name is prefixed with @ character it means that all users in
+the group name match. If it is prefixed with a % character the SELinux user is
+used to match against the name instead of the account name. Note that when
+SELinux is disabled the SELinux user assigned to the account cannot be
+determined. This means that such entries are never matched when SELinux is
+disabled and pam_sepermit will return PAM_IGNORE.
+
+See sepermit.conf(5) for details.
+
+OPTIONS
+
+debug
+
+ Turns on debugging via syslog(3).
+
+conf=/path/to/config/file
+
+ Path to alternative config file overriding the default.
+
+EXAMPLES
+
+auth [success=done ignore=ignore default=bad] pam_sepermit.so
+auth required pam_unix.so
+account required pam_unix.so
+session required pam_permit.so
+
+
+AUTHOR
+
+pam_sepermit and this manual page were written by Tomas Mraz
+<tmraz@redhat.com>.
+
diff --git a/modules/pam_sepermit/README.xml b/modules/pam_sepermit/README.xml
new file mode 100644
index 0000000..bb65951
--- /dev/null
+++ b/modules/pam_sepermit/README.xml
@@ -0,0 +1,41 @@
+<?xml version="1.0" encoding='UTF-8'?>
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+"http://www.docbook.org/xml/4.3/docbookx.dtd"
+[
+<!--
+<!ENTITY pamaccess SYSTEM "pam_sepermit.8.xml">
+-->
+]>
+
+<article>
+
+ <articleinfo>
+
+ <title>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="pam_sepermit.8.xml" xpointer='xpointer(//refnamediv[@id = "pam_sepermit-name"]/*)'/>
+ </title>
+
+ </articleinfo>
+
+ <section>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="pam_sepermit.8.xml" xpointer='xpointer(//refsect1[@id = "pam_sepermit-description"]/*)'/>
+ </section>
+
+ <section>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="pam_sepermit.8.xml" xpointer='xpointer(//refsect1[@id = "pam_sepermit-options"]/*)'/>
+ </section>
+
+ <section>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="pam_sepermit.8.xml" xpointer='xpointer(//refsect1[@id = "pam_sepermit-examples"]/*)'/>
+ </section>
+
+ <section>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="pam_sepermit.8.xml" xpointer='xpointer(//refsect1[@id = "pam_sepermit-author"]/*)'/>
+ </section>
+
+</article>
diff --git a/modules/pam_sepermit/pam_sepermit.8 b/modules/pam_sepermit/pam_sepermit.8
new file mode 100644
index 0000000..71fd28d
--- /dev/null
+++ b/modules/pam_sepermit/pam_sepermit.8
@@ -0,0 +1,130 @@
+'\" t
+.\" Title: pam_sepermit
+.\" Author: [see the "AUTHOR" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\" Date: 05/18/2017
+.\" Manual: Linux-PAM Manual
+.\" Source: Linux-PAM Manual
+.\" Language: English
+.\"
+.TH "PAM_SEPERMIT" "8" "05/18/2017" "Linux-PAM Manual" "Linux\-PAM Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+pam_sepermit \- PAM module to allow/deny login depending on SELinux enforcement state
+.SH "SYNOPSIS"
+.HP \w'\fBpam_sepermit\&.so\fR\ 'u
+\fBpam_sepermit\&.so\fR [debug] [conf=\fI/path/to/config/file\fR]
+.SH "DESCRIPTION"
+.PP
+The pam_sepermit module allows or denies login depending on SELinux enforcement state\&.
+.PP
+When the user which is logging in matches an entry in the config file he is allowed access only when the SELinux is in enforcing mode\&. Otherwise he is denied access\&. For users not matching any entry in the config file the pam_sepermit module returns PAM_IGNORE return value\&.
+.PP
+The config file contains a list of user names one per line with optional arguments\&. If the
+\fIname\fR
+is prefixed with
+\fI@\fR
+character it means that all users in the group
+\fIname\fR
+match\&. If it is prefixed with a
+\fI%\fR
+character the SELinux user is used to match against the
+\fIname\fR
+instead of the account name\&. Note that when SELinux is disabled the SELinux user assigned to the account cannot be determined\&. This means that such entries are never matched when SELinux is disabled and pam_sepermit will return PAM_IGNORE\&.
+.PP
+See
+\fBsepermit.conf\fR(5)
+for details\&.
+.SH "OPTIONS"
+.PP
+\fBdebug\fR
+.RS 4
+Turns on debugging via
+\fBsyslog\fR(3)\&.
+.RE
+.PP
+\fBconf=\fR\fB\fI/path/to/config/file\fR\fR
+.RS 4
+Path to alternative config file overriding the default\&.
+.RE
+.SH "MODULE TYPES PROVIDED"
+.PP
+The
+\fBauth\fR
+and
+\fBaccount\fR
+module types are provided\&.
+.SH "RETURN VALUES"
+.PP
+PAM_AUTH_ERR
+.RS 4
+SELinux is disabled or in the permissive mode and the user matches\&.
+.RE
+.PP
+PAM_SUCCESS
+.RS 4
+SELinux is in the enforcing mode and the user matches\&.
+.RE
+.PP
+PAM_IGNORE
+.RS 4
+The user does not match any entry in the config file\&.
+.RE
+.PP
+PAM_USER_UNKNOWN
+.RS 4
+The module was unable to determine the user\*(Aqs name\&.
+.RE
+.PP
+PAM_SERVICE_ERR
+.RS 4
+Error during reading or parsing the config file\&.
+.RE
+.SH "FILES"
+.PP
+/etc/security/sepermit\&.conf
+.RS 4
+Default configuration file
+.RE
+.SH "EXAMPLES"
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+auth [success=done ignore=ignore default=bad] pam_sepermit\&.so
+auth required pam_unix\&.so
+account required pam_unix\&.so
+session required pam_permit\&.so
+
+.fi
+.if n \{\
+.RE
+.\}
+.SH "SEE ALSO"
+.PP
+\fBsepermit.conf\fR(5),
+\fBpam.conf\fR(5),
+\fBpam.d\fR(5),
+\fBpam\fR(8)\fBselinux\fR(8)
+.SH "AUTHOR"
+.PP
+pam_sepermit and this manual page were written by Tomas Mraz <tmraz@redhat\&.com>\&.
diff --git a/modules/pam_sepermit/pam_sepermit.8.xml b/modules/pam_sepermit/pam_sepermit.8.xml
new file mode 100644
index 0000000..30d9cc5
--- /dev/null
+++ b/modules/pam_sepermit/pam_sepermit.8.xml
@@ -0,0 +1,194 @@
+<?xml version="1.0" encoding='UTF-8'?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+ "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
+
+<refentry id="pam_sepermit">
+
+ <refmeta>
+ <refentrytitle>pam_sepermit</refentrytitle>
+ <manvolnum>8</manvolnum>
+ <refmiscinfo class="sectdesc">Linux-PAM Manual</refmiscinfo>
+ </refmeta>
+
+ <refnamediv id="pam_sepermit-name">
+ <refname>pam_sepermit</refname>
+ <refpurpose>PAM module to allow/deny login depending on SELinux enforcement state</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <cmdsynopsis id="pam_sepermit-cmdsynopsis">
+ <command>pam_sepermit.so</command>
+ <arg choice="opt">
+ debug
+ </arg>
+ <arg choice="opt">
+ conf=<replaceable>/path/to/config/file</replaceable>
+ </arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1 id="pam_sepermit-description">
+ <title>DESCRIPTION</title>
+ <para>
+ The pam_sepermit module allows or denies login depending on SELinux
+ enforcement state.
+ </para>
+ <para>
+ When the user which is logging in matches an entry in the config file
+ he is allowed access only when the SELinux is in enforcing mode. Otherwise
+ he is denied access. For users not matching any entry in the config file
+ the pam_sepermit module returns PAM_IGNORE return value.
+ </para>
+ <para>
+ The config file contains a list of user names one per line with optional arguments. If the
+ <replaceable>name</replaceable> is prefixed with <emphasis>@</emphasis> character it means that all
+ users in the group <replaceable>name</replaceable> match. If it is prefixed
+ with a <emphasis>%</emphasis> character the SELinux user is used to match against the <replaceable>name</replaceable>
+ instead of the account name. Note that when SELinux is disabled the
+ SELinux user assigned to the account cannot be determined. This means that
+ such entries are never matched when SELinux is disabled and pam_sepermit
+ will return PAM_IGNORE.
+ </para>
+ <para>
+ See <citerefentry>
+ <refentrytitle>sepermit.conf</refentrytitle><manvolnum>5</manvolnum>
+ </citerefentry> for details.
+ </para>
+
+ </refsect1>
+
+ <refsect1 id="pam_sepermit-options">
+ <title>OPTIONS</title>
+ <variablelist>
+ <varlistentry>
+ <term>
+ <option>debug</option>
+ </term>
+ <listitem>
+ <para>
+ Turns on debugging via
+ <citerefentry>
+ <refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum>
+ </citerefentry>.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>conf=<replaceable>/path/to/config/file</replaceable></option>
+ </term>
+ <listitem>
+ <para>
+ Path to alternative config file overriding the default.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1 id="pam_sepermit-types">
+ <title>MODULE TYPES PROVIDED</title>
+ <para>
+ The <option>auth</option> and <option>account</option>
+ module types are provided.
+ </para>
+ </refsect1>
+
+ <refsect1 id='pam_sepermit-return_values'>
+ <title>RETURN VALUES</title>
+ <variablelist>
+ <varlistentry>
+ <term>PAM_AUTH_ERR</term>
+ <listitem>
+ <para>
+ SELinux is disabled or in the permissive mode and the user
+ matches.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>PAM_SUCCESS</term>
+ <listitem>
+ <para>
+ SELinux is in the enforcing mode and the user matches.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>PAM_IGNORE</term>
+ <listitem>
+ <para>
+ The user does not match any entry in the config file.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>PAM_USER_UNKNOWN</term>
+ <listitem>
+ <para>
+ The module was unable to determine the user's name.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>PAM_SERVICE_ERR</term>
+ <listitem>
+ <para>
+ Error during reading or parsing the config file.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1 id="pam_sepermit-files">
+ <title>FILES</title>
+ <variablelist>
+ <varlistentry>
+ <term><filename>/etc/security/sepermit.conf</filename></term>
+ <listitem>
+ <para>Default configuration file</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1 id='pam_sepermit-examples'>
+ <title>EXAMPLES</title>
+ <programlisting>
+auth [success=done ignore=ignore default=bad] pam_sepermit.so
+auth required pam_unix.so
+account required pam_unix.so
+session required pam_permit.so
+ </programlisting>
+ </refsect1>
+
+ <refsect1 id='pam_sepermit-see_also'>
+ <title>SEE ALSO</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>sepermit.conf</refentrytitle><manvolnum>5</manvolnum>
+ </citerefentry>,
+ <citerefentry>
+ <refentrytitle>pam.conf</refentrytitle><manvolnum>5</manvolnum>
+ </citerefentry>,
+ <citerefentry>
+ <refentrytitle>pam.d</refentrytitle><manvolnum>5</manvolnum>
+ </citerefentry>,
+ <citerefentry>
+ <refentrytitle>pam</refentrytitle><manvolnum>8</manvolnum>
+ </citerefentry>
+ <citerefentry>
+ <refentrytitle>selinux</refentrytitle><manvolnum>8</manvolnum>
+ </citerefentry>
+ </para>
+ </refsect1>
+
+ <refsect1 id='pam_sepermit-author'>
+ <title>AUTHOR</title>
+ <para>
+ pam_sepermit and this manual page were written by Tomas Mraz &lt;tmraz@redhat.com&gt;.
+ </para>
+ </refsect1>
+
+</refentry>
diff --git a/modules/pam_sepermit/pam_sepermit.c b/modules/pam_sepermit/pam_sepermit.c
new file mode 100644
index 0000000..c653290
--- /dev/null
+++ b/modules/pam_sepermit/pam_sepermit.c
@@ -0,0 +1,445 @@
+/******************************************************************************
+ * A module for Linux-PAM that allows/denies acces based on SELinux state.
+ *
+ * Copyright (c) 2007, 2008, 2009 Red Hat, Inc.
+ * Originally written by Tomas Mraz <tmraz@redhat.com>
+ * Contributions by Dan Walsh <dwalsh@redhat.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, and the entire permission notice in its entirety,
+ * including the disclaimer of warranties.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * ALTERNATIVELY, this product may be distributed under the terms of
+ * the GNU Public License, in which case the provisions of the GPL are
+ * required INSTEAD OF the above restrictions. (This clause is
+ * necessary due to a potential bad interaction between the GPL and
+ * the restrictions contained in a BSD-style copyright.)
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "config.h"
+
+#include <errno.h>
+#include <pwd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <syslog.h>
+#include <ctype.h>
+#include <signal.h>
+#include <limits.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <pwd.h>
+#include <dirent.h>
+
+#define PAM_SM_AUTH
+#define PAM_SM_ACCOUNT
+
+#include <security/pam_modules.h>
+#include <security/_pam_macros.h>
+#include <security/pam_modutil.h>
+#include <security/pam_ext.h>
+
+#include <selinux/selinux.h>
+
+#define MODULE "pam_sepermit"
+#define OPT_DELIM ":"
+
+struct lockfd {
+ uid_t uid;
+ int fd;
+ int debug;
+};
+
+#define PROC_BASE "/proc"
+#define MAX_NAMES (int)(sizeof(unsigned long)*8)
+
+static int
+match_process_uid(pid_t pid, uid_t uid)
+{
+ char buf[128];
+ uid_t puid;
+ FILE *f;
+ int re = 0;
+
+ snprintf (buf, sizeof buf, PROC_BASE "/%d/status", pid);
+ if (!(f = fopen (buf, "r")))
+ return 0;
+
+ while (fgets(buf, sizeof buf, f)) {
+ if (sscanf (buf, "Uid:\t%d", &puid)) {
+ re = uid == puid;
+ break;
+ }
+ }
+ fclose(f);
+ return re;
+}
+
+static int
+check_running (pam_handle_t *pamh, uid_t uid, int killall, int debug)
+{
+ DIR *dir;
+ struct dirent *de;
+ pid_t *pid_table, pid, self;
+ int i;
+ int pids, max_pids;
+ int running = 0;
+ self = getpid();
+ if (!(dir = opendir(PROC_BASE))) {
+ pam_syslog(pamh, LOG_ERR, "Failed to open proc directory file %s:", PROC_BASE);
+ return -1;
+ }
+ max_pids = 256;
+ pid_table = malloc(max_pids * sizeof (pid_t));
+ if (!pid_table) {
+ (void)closedir(dir);
+ pam_syslog(pamh, LOG_CRIT, "Memory allocation error");
+ return -1;
+ }
+ pids = 0;
+ while ((de = readdir (dir)) != NULL) {
+ if (!(pid = (pid_t)atoi(de->d_name)) || pid == self)
+ continue;
+
+ if (pids == max_pids) {
+ pid_t *npt;
+
+ if (!(npt = realloc(pid_table, 2*pids*sizeof(pid_t)))) {
+ free(pid_table);
+ (void)closedir(dir);
+ pam_syslog(pamh, LOG_CRIT, "Memory allocation error");
+ return -1;
+ }
+ pid_table = npt;
+ max_pids *= 2;
+ }
+ pid_table[pids++] = pid;
+ }
+
+ (void)closedir(dir);
+
+ for (i = 0; i < pids; i++) {
+ pid_t id;
+
+ if (match_process_uid(pid_table[i], uid) == 0)
+ continue;
+ id = pid_table[i];
+
+ if (killall) {
+ if (debug)
+ pam_syslog(pamh, LOG_NOTICE, "Attempting to kill %d", id);
+ kill(id, SIGKILL);
+ }
+ running++;
+ }
+
+ free(pid_table);
+ return running;
+}
+
+/*
+ * This function reads the loginuid from the /proc system. It returns
+ * (uid_t)-1 on failure.
+ */
+static uid_t get_loginuid(pam_handle_t *pamh)
+{
+ int fd, count;
+ char loginuid[24];
+ char *eptr;
+ uid_t rv = (uid_t)-1;
+
+ fd = open("/proc/self/loginuid", O_NOFOLLOW|O_RDONLY);
+ if (fd < 0) {
+ if (errno != ENOENT) {
+ pam_syslog(pamh, LOG_ERR,
+ "Cannot open /proc/self/loginuid: %m");
+ }
+ return rv;
+ }
+ if ((count = pam_modutil_read(fd, loginuid, sizeof(loginuid)-1)) < 1) {
+ close(fd);
+ return rv;
+ }
+ loginuid[count] = '\0';
+ close(fd);
+
+ errno = 0;
+ rv = strtoul(loginuid, &eptr, 10);
+ if (errno != 0 || eptr == loginuid)
+ rv = (uid_t) -1;
+
+ return rv;
+}
+
+static void
+sepermit_unlock(pam_handle_t *pamh, void *plockfd, int error_status UNUSED)
+{
+ struct lockfd *lockfd = plockfd;
+ struct flock fl;
+
+ memset(&fl, 0, sizeof(fl));
+ fl.l_type = F_UNLCK;
+ fl.l_whence = SEEK_SET;
+
+ if (lockfd->debug)
+ pam_syslog(pamh, LOG_ERR, "Unlocking fd: %d uid: %d", lockfd->fd, lockfd->uid);
+
+ /* Don't kill uid==0 */
+ if (lockfd->uid)
+ /* This is a DOS but it prevents an app from forking to prevent killing */
+ while(check_running(pamh, lockfd->uid, 1, lockfd->debug) > 0)
+ continue;
+
+ (void)fcntl(lockfd->fd, F_SETLK, &fl);
+ (void)close(lockfd->fd);
+ free(lockfd);
+}
+
+static int
+sepermit_lock(pam_handle_t *pamh, const char *user, int debug)
+{
+ char buf[PATH_MAX];
+ struct flock fl;
+
+ memset(&fl, 0, sizeof(fl));
+ fl.l_type = F_WRLCK;
+ fl.l_whence = SEEK_SET;
+
+ struct passwd *pw = pam_modutil_getpwnam( pamh, user );
+ if (!pw) {
+ pam_syslog(pamh, LOG_ERR, "Unable to find uid for user %s", user);
+ return -1;
+ }
+ if (check_running(pamh, pw->pw_uid, 0, debug) > 0) {
+ pam_syslog(pamh, LOG_ERR, "User %s processes are running. Exclusive login not allowed", user);
+ return -1;
+ }
+
+ snprintf(buf, sizeof(buf), "%s/%d.lock", SEPERMIT_LOCKDIR, pw->pw_uid);
+ int fd = open(buf, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR);
+ if (fd < 0) {
+ pam_syslog(pamh, LOG_ERR, "Unable to open lock file %s/%d.lock", SEPERMIT_LOCKDIR, pw->pw_uid);
+ return -1;
+ }
+
+ /* Need to close on exec */
+ fcntl(fd, F_SETFD, FD_CLOEXEC);
+
+ if (fcntl(fd, F_SETLK, &fl) == -1) {
+ pam_syslog(pamh, LOG_ERR, "User %s with exclusive login already logged in", user);
+ close(fd);
+ return -1;
+ }
+ struct lockfd *lockfd=calloc(1, sizeof(struct lockfd));
+ if (!lockfd) {
+ close(fd);
+ pam_syslog(pamh, LOG_CRIT, "Memory allocation error");
+ return -1;
+ }
+ lockfd->uid = pw->pw_uid;
+ lockfd->debug = debug;
+ lockfd->fd=fd;
+ pam_set_data(pamh, MODULE, lockfd, sepermit_unlock);
+ return 0;
+}
+
+/* return 0 when matched, -1 when unmatched, pam error otherwise */
+static int
+sepermit_match(pam_handle_t *pamh, const char *cfgfile, const char *user,
+ const char *seuser, int debug, int *sense)
+{
+ FILE *f;
+ char *line = NULL;
+ char *start;
+ size_t len = 0;
+ int matched = 0;
+ int exclusive = 0;
+ int ignore = 0;
+
+ f = fopen(cfgfile, "r");
+
+ if (!f) {
+ pam_syslog(pamh, LOG_ERR, "Failed to open config file %s: %m", cfgfile);
+ return PAM_SERVICE_ERR;
+ }
+
+ while (!matched && getline(&line, &len, f) != -1) {
+ size_t n;
+ char *sptr;
+ char *opt;
+
+ if (line[0] == '#')
+ continue;
+
+ start = line;
+ while (isspace(*start))
+ ++start;
+ n = strlen(start);
+ while (n > 0 && isspace(start[n-1])) {
+ --n;
+ }
+ if (n == 0)
+ continue;
+
+ start[n] = '\0';
+ start = strtok_r(start, OPT_DELIM, &sptr);
+
+ switch (start[0]) {
+ case '@':
+ ++start;
+ if (debug)
+ pam_syslog(pamh, LOG_NOTICE, "Matching user %s against group %s", user, start);
+ if (pam_modutil_user_in_group_nam_nam(pamh, user, start)) {
+ matched = 1;
+ }
+ break;
+ case '%':
+ if (seuser == NULL)
+ break;
+ ++start;
+ if (debug)
+ pam_syslog(pamh, LOG_NOTICE, "Matching seuser %s against seuser %s", seuser, start);
+ if (strcmp(seuser, start) == 0) {
+ matched = 1;
+ }
+ break;
+ default:
+ if (debug)
+ pam_syslog(pamh, LOG_NOTICE, "Matching user %s against user %s", user, start);
+ if (strcmp(user, start) == 0) {
+ matched = 1;
+ }
+ }
+ if (matched)
+ while ((opt=strtok_r(NULL, OPT_DELIM, &sptr)) != NULL) {
+ if (strcmp(opt, "exclusive") == 0)
+ exclusive = 1;
+ else if (strcmp(opt, "ignore") == 0)
+ ignore = 1;
+ else if (debug) {
+ pam_syslog(pamh, LOG_NOTICE, "Unknown user option: %s", opt);
+ }
+ }
+ }
+
+ free(line);
+ fclose(f);
+ if (matched) {
+ if (*sense == PAM_SUCCESS) {
+ if (ignore)
+ *sense = PAM_IGNORE;
+ if (geteuid() == 0 && exclusive && get_loginuid(pamh) == -1)
+ if (sepermit_lock(pamh, user, debug) < 0)
+ *sense = PAM_AUTH_ERR;
+ }
+ return 0;
+ }
+ else
+ return -1;
+}
+
+int
+pam_sm_authenticate(pam_handle_t *pamh, int flags UNUSED,
+ int argc, const char **argv)
+{
+ int i;
+ int rv;
+ int debug = 0;
+ int sense = PAM_AUTH_ERR;
+ const char *user = NULL;
+ char *seuser = NULL;
+ char *level = NULL;
+ const char *cfgfile = SEPERMIT_CONF_FILE;
+
+ /* Parse arguments. */
+ for (i = 0; i < argc; i++) {
+ if (strcmp(argv[i], "debug") == 0) {
+ debug = 1;
+ }
+ if (strcmp(argv[i], "conf=") == 0) {
+ cfgfile = argv[i] + 5;
+ }
+ }
+
+ if (debug)
+ pam_syslog(pamh, LOG_NOTICE, "Parsing config file: %s", cfgfile);
+
+ if (pam_get_user(pamh, &user, NULL) != PAM_SUCCESS || user == NULL
+ || *user == '\0') {
+ pam_syslog(pamh, LOG_ERR, "Cannot determine the user's name");
+ return PAM_USER_UNKNOWN;
+ }
+
+ if (is_selinux_enabled() > 0) {
+ if (security_getenforce() == 1) {
+ if (debug)
+ pam_syslog(pamh, LOG_NOTICE, "Enforcing mode, access will be allowed on match");
+ sense = PAM_SUCCESS;
+ }
+ }
+
+ if (getseuserbyname(user, &seuser, &level) != 0) {
+ seuser = NULL;
+ level = NULL;
+ pam_syslog(pamh, LOG_ERR, "getseuserbyname failed: %m");
+ }
+
+ if (debug && sense != PAM_SUCCESS)
+ pam_syslog(pamh, LOG_NOTICE, "Access will not be allowed on match");
+
+ rv = sepermit_match(pamh, cfgfile, user, seuser, debug, &sense);
+
+ if (debug)
+ pam_syslog(pamh, LOG_NOTICE, "sepermit_match returned: %d", rv);
+
+ free(seuser);
+ free(level);
+
+ switch (rv) {
+ case -1:
+ return PAM_IGNORE;
+ case 0:
+ return sense;
+ }
+
+ return rv;
+}
+
+int
+pam_sm_setcred (pam_handle_t *pamh UNUSED, int flags UNUSED,
+ int argc UNUSED, const char **argv UNUSED)
+{
+ return PAM_IGNORE;
+}
+
+int
+pam_sm_acct_mgmt(pam_handle_t *pamh, int flags,
+ int argc, const char **argv)
+{
+ return pam_sm_authenticate(pamh, flags, argc, argv);
+}
diff --git a/modules/pam_sepermit/sepermit.conf b/modules/pam_sepermit/sepermit.conf
new file mode 100644
index 0000000..951f3df
--- /dev/null
+++ b/modules/pam_sepermit/sepermit.conf
@@ -0,0 +1,11 @@
+# /etc/security/sepermit.conf
+#
+# Each line contains either:
+# - an user name
+# - a group name, with @group syntax
+# - a SELinux user name, with %seuser syntax
+# Each line can contain optional arguments separated by :
+# The possible arguments are:
+# - exclusive - only single login session will
+# be allowed for the user and the user's processes
+# will be killed on logout
diff --git a/modules/pam_sepermit/sepermit.conf.5 b/modules/pam_sepermit/sepermit.conf.5
new file mode 100644
index 0000000..d797b53
--- /dev/null
+++ b/modules/pam_sepermit/sepermit.conf.5
@@ -0,0 +1,117 @@
+'\" t
+.\" Title: sepermit.conf
+.\" Author: [see the "AUTHOR" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\" Date: 05/18/2017
+.\" Manual: Linux-PAM Manual
+.\" Source: Linux-PAM Manual
+.\" Language: English
+.\"
+.TH "SEPERMIT\&.CONF" "5" "05/18/2017" "Linux-PAM Manual" "Linux\-PAM Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+sepermit.conf \- configuration file for the pam_sepermit module
+.SH "DESCRIPTION"
+.PP
+The lines of the configuration file have the following syntax:
+.PP
+\fI<user>\fR[:\fI<option>\fR:\fI<option>\fR\&.\&.\&.]
+.PP
+The
+\fBuser\fR
+can be specified in the following manner:
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+a username
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+a groupname, with
+\fB@group\fR
+syntax\&. This should not be confused with netgroups\&.
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+a SELinux user name with
+\fB%seuser\fR
+syntax\&.
+.RE
+.PP
+The recognized options are:
+.PP
+\fBexclusive\fR
+.RS 4
+Only single login session will be allowed for the user and the user\*(Aqs processes will be killed on logout\&.
+.RE
+.PP
+\fBignore\fR
+.RS 4
+The module will never return PAM_SUCCESS status for the user\&. It will return PAM_IGNORE if SELinux is in the enforcing mode, and PAM_AUTH_ERR otherwise\&. It is useful if you want to support passwordless guest users and other confined users with passwords simultaneously\&.
+.RE
+.PP
+The lines which start with # character are comments and are ignored\&.
+.SH "EXAMPLES"
+.PP
+These are some example lines which might be specified in
+/etc/security/sepermit\&.conf\&.
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+%guest_u:exclusive
+%staff_u:ignore
+%user_u:ignore
+
+.fi
+.if n \{\
+.RE
+.\}
+.SH "SEE ALSO"
+.PP
+\fBpam_sepermit\fR(8),
+\fBpam.d\fR(5),
+\fBpam\fR(8),
+\fBselinux\fR(8),
+.SH "AUTHOR"
+.PP
+pam_sepermit and this manual page were written by Tomas Mraz <tmraz@redhat\&.com>
diff --git a/modules/pam_sepermit/sepermit.conf.5.xml b/modules/pam_sepermit/sepermit.conf.5.xml
new file mode 100644
index 0000000..511480f
--- /dev/null
+++ b/modules/pam_sepermit/sepermit.conf.5.xml
@@ -0,0 +1,110 @@
+<?xml version="1.0" encoding='UTF-8'?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+ "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
+
+<refentry id="sepermit.conf">
+
+ <refmeta>
+ <refentrytitle>sepermit.conf</refentrytitle>
+ <manvolnum>5</manvolnum>
+ <refmiscinfo class="sectdesc">Linux-PAM Manual</refmiscinfo>
+ </refmeta>
+
+ <refnamediv>
+ <refname>sepermit.conf</refname>
+ <refpurpose>configuration file for the pam_sepermit module</refpurpose>
+ </refnamediv>
+
+ <refsect1 id='sepermit.conf-description'>
+ <title>DESCRIPTION</title>
+ <para>
+ The lines of the configuration file have the following syntax:
+ </para>
+ <para>
+ <replaceable>&lt;user&gt;</replaceable>[:<replaceable>&lt;option&gt;</replaceable>:<replaceable>&lt;option&gt;</replaceable>...]
+ </para>
+ <para>
+ The <emphasis remap='B'>user</emphasis> can be specified in the following manner:
+ </para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ a username
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ a groupname, with <emphasis remap='B'>@group</emphasis> syntax.
+ This should not be confused with netgroups.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ a SELinux user name with <emphasis remap='B'>%seuser</emphasis> syntax.
+ </para>
+ </listitem>
+ </itemizedlist>
+
+ <para>
+ The recognized options are:
+ </para>
+
+ <variablelist>
+ <varlistentry>
+ <term><option>exclusive</option></term>
+ <listitem>
+ <para>
+ Only single login session will be allowed for the user
+ and the user's processes will be killed on logout.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>ignore</option></term>
+ <listitem>
+ <para>
+ The module will never return PAM_SUCCESS status for the user.
+ It will return PAM_IGNORE if SELinux is in the enforcing mode,
+ and PAM_AUTH_ERR otherwise. It is useful if you want to support
+ passwordless guest users and other confined users with passwords
+ simultaneously.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+
+ <para>
+ The lines which start with # character are comments and are ignored.
+ </para>
+ </refsect1>
+
+ <refsect1 id="sepermit.conf-examples">
+ <title>EXAMPLES</title>
+ <para>
+ These are some example lines which might be specified in
+ <filename>/etc/security/sepermit.conf</filename>.
+ </para>
+ <programlisting>
+%guest_u:exclusive
+%staff_u:ignore
+%user_u:ignore
+ </programlisting>
+ </refsect1>
+
+ <refsect1 id="sepermit.conf-see_also">
+ <title>SEE ALSO</title>
+ <para>
+ <citerefentry><refentrytitle>pam_sepermit</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>pam.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>pam</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>selinux</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ </para>
+ </refsect1>
+
+ <refsect1 id="sepermit.conf-author">
+ <title>AUTHOR</title>
+ <para>
+ pam_sepermit and this manual page were written by Tomas Mraz &lt;tmraz@redhat.com&gt;
+ </para>
+ </refsect1>
+</refentry>
diff --git a/modules/pam_sepermit/tst-pam_sepermit b/modules/pam_sepermit/tst-pam_sepermit
new file mode 100755
index 0000000..6e6d236
--- /dev/null
+++ b/modules/pam_sepermit/tst-pam_sepermit
@@ -0,0 +1,2 @@
+#!/bin/sh
+../../tests/tst-dlopen .libs/pam_sepermit.so
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 17:42:06 +0000