diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:46:31 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:46:31 +0000 |
commit | 32afea41ba8b7328e252ae97ca32c56f98d42a90 (patch) | |
tree | 11b25ffd59d9190c8316cd48ace4e198531d0e7d /debian/README.Debian | |
parent | Adding upstream version 3.4.23. (diff) | |
download | postfix-32afea41ba8b7328e252ae97ca32c56f98d42a90.tar.xz postfix-32afea41ba8b7328e252ae97ca32c56f98d42a90.zip |
Adding debian version 3.4.23-0+deb10u1.debian/3.4.23-0+deb10u1debian
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'debian/README.Debian')
-rw-r--r-- | debian/README.Debian | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/debian/README.Debian b/debian/README.Debian new file mode 100644 index 0000000..ba30106 --- /dev/null +++ b/debian/README.Debian @@ -0,0 +1,264 @@ +In order to support multiple postfix instances, postfix uses multiple systemd +unit files. The overall postfix unit is for overall operations on all +instances and individual unit files are available for each instance named +postfix@${INSTANCE_NAME}. The primary instance is named "-", so it can be +directly addressed with systemctl using the name postfix@- (e.g. +systemctl status postfix@-). Wild cards work and so systemctl status postfix* +will show the status of all active postfix units. + +In order to configure multiple postfix instances, follow the upstream +directions (MULTI_INSTANCE_README) up to the point of starting the new +instance. Instead do the following (if running systemd - multi-instance with +sysv init is untested by the maintainers in Debian 9, code name stretch): + +# systemctl daemon-reload +# systemctl enable postfix@${INSTANCE_NAME}.service +# systemctl start postfix@${INSTANCE_NAME}.service + +Once that is done, the new instance will be started and its status will show +up with as part of systemctl status postfix*. + + +There are some significant differences between the Debian Postfix packages, +and the source from upstream: + +1. The Debian install is chrooted by default. +2. Debian init system (systemd or sysv init) commands (e.g. systemctl or + service) should be used in lieu of direct calls to the postfix binary as + described in the upstream documentation is order to problem integrate with + Debian features such as using the system CA certificate bundle and proper + chroot configuration with system libraries and services. +2A. In the standard Debian networking configuration, postfix is not notified + if /etc/resolv.conf is updated, so the copy in the postfix chroot may + become stale. Installation of the resolvconf package should prevent this + problem for networking configurations where it is an issue. +3. For policy reasons: + a. SASL configuration goes in /etc/postfix/sasl + b. myhostname=/path/to/file is supported (and used) in main.cf +4. IPV6 support is enabled: postfix listens on ipv6/ipv4 by default, + (see: inet_protocols) +5. TLS/SASL support is enabled. +6. rmail comes from sendmail, not from postfix. +7. The upstream main.cf is delivered as /usr/share/postfix/main.cf.dist, + rather than cluttering /etc/postfix/main.cf with comments. + +Known caveats: +1. The dynamically loadable modules are not found in the chroot. + Therefore, proxy maps may require you to copy the appropriate shared + object into the chroot if you chroot the proxy service in master.cf. +2. Some map types (and SASL support) require some extra configuration + (beyond what upstream indicates) to run inside the chroot. The simplest + solution for the maps is to use the proxy service, which is not chrooted. + SASL is a bit more complex, and is on the TODO list... +3. Note that the chrooted daemons open /dev/log before chrooting, so if your + syslog daemon is restarted, the daemons will be unable to reconnect to the + syslog socket, and hence being unable to log. The postfix package provides + a config snipped for the rsyslog daemon in /etc/rsyslog.d/postfix.conf to + also open a socket in /var/log/postfix/dev. For other syslog daemons, you + will also have to restart postfix after restarting the syslog daemon, or + configure it to open an additional socket. + a. For sysklogd (the default in Debian versions prior to Lenny), add + SYSLOG="-a /var/spool/postfix/dev/log" to /etc/default/syslog. + b. For inetutils-syslogd, add SYSLOGD_OPTS="-a /var/spool/postfix/dev/log" to + /etc/default/inetutils-syslogd. +4. Map types from the dynamically loadable modules are supported for the + alias database, but it is up to the system administrator to ensure the + required package is installed before changing the postfix configuration. + After changing the map type, newaliases must be run by hand. + +Upgrade notes: + milter_protocol: + Nearly all milter packages in the Debian archive use the + libmilter1.0.1 library which as of version 8.14 supports sendmail + milter protocol version 6. The postfix default, starting in version + 2.6, is 'milter_protocol = 6'. If you are migrating a older postfix + configuration that specifies a lower version, it should be safe to + remove and depend on the default. If you are using milters not + provided by Debian, you may need to ensure compatibility. + For more information please see + http://www.postfix.org/MILTER_README.html + + +Postfix Smarthost Configuration + +Postfix can be configured to relay mail to a 'smarthost' for delivery. In +practice, with real world smarthosts, considerable configuration is required to +make this work. Some of this configuration can be done via debconf +('dpkg-reconfigure postfix'), but much of it will usually need to be done +manually. This document provides instructions for such configuration. + +1. Set the smarthost + +This can be set via debconf. To do it manually, add a line like the following +to /etc/postfix/main.cf: + +relayhost = [relayhost.example.com]:465 + +If the port number is omitted, the default is 25. Most smarthosts use TLS/SSL, +and accordingly generally use either 465 or 587 - see below. + +2. Enable TLS/SSL + +As above, most smarthosts use TLS/SSL. To configure Postfix to use TLS, add the +following lines to main.cf: + +smtp_tls_security_level = verify +smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt + +If 'encrypt' is used instead of 'verify', the second line may be omitted. +'encrypt' means that TLS will be used but Postfix will not verify the +smarthost's certificate, potentially allowing a man-in-the-middle attack and +the stealing of the smarthost authentication credentials. On the other hand, +'secure' may be used as an even stricter value than 'verify'. See the +explanation of 'smtp_tls_security_level' values in postconf(5) for details. + +If SMTPS (sometimes called 'SSL', usually used in conjunction with +port 465) is desired, add the following additional line to main.cf: + +smtp_tls_wrappermode = yes + +For STARTTLS (usually used in conjunction with port 587), omit this line (or +use the value 'no'). + +As to which port number / TLS type to use: consult your smarthost's +documentation. If only one option is available, you will have to use that one. +If both are available, the question is a toss-up. For the last couple of +decades, STARTTLS on port 587 has been the offical, standards compliant method, +although SMTPS on port 465 was also widely used. Recently, RFC 8314 has +proposed the offical recognition of TLS on port 465. + +One potential weakness of STARTTLS is that as a form of opportunistic TLS, it +is subject to a man-in-the-middle downgrade attack, where the server's +advertisement of STARTTLS support is stripped out (STRIPTLS) by an attacker, +causing the connection to continue without TLS: + +https://en.wikipedia.org/wiki/STARTTLS#Weaknesses_and_mitigations + +This can be avoided by making TLS mandatory, via the use of an appropriate +value for 'smtp_tls_security_level' such as 'encrypt', 'verify', or 'secure'. + +3. Configure authentication + +Most smarthosts require authentication. To enable it, ensure that the package +'libsasl2-modules' is installed, and add the following lines to main.cf: + +smtp_sasl_auth_enable = yes +smtp_sasl_security_options = + +[See postconf(5) for more information about 'smtp_sasl_security_options' and +its possible values. The above version, with no options, is generally fine.] + +To specify the authentication credentials, create an arbitrarily named file +(e.g., '/etc/postfix/example-passwd'), with appropriately restrictive +permissions (e.g., 600) containing a single line of the following form: + +relayhost.example.com username@example.com:secret_password + +Where 'relayhost.example.com' is the name of the smarthost, +'username@example.com' is the login name, and 'secret_password' is the login +password. + +After creating the file, run the command: + +postmap /etc/postfix/example-passwd + +and add the following line to main.cf: + +smtp_sasl_password_maps = hash:/etc/postfix/example-passwd + +4. Address rewriting + +Most smarthosts require that the sender (envelope FROM and perhaps also the +email From: header) be set to the user's correct mail address with the +smarthost. Postfix therefore needs to be configured to rewrite the sender +address accordingly. There are multiple ways to do this, including canonical +mapping and SMTP generic mapping. + +4a. Canonical mapping + +With sender canonical mapping, all sender addresses are rewritten upon +Postfix's receipt of the mail. Create an arbitrarily named file (e.g., +'/etc/postfix/sender_canonical'), containing lines of the form + +local-user1 username@example.com +local-user2 username@example.com + +where 'local-user1' and 'local-user2' are usernames on the system that will be +sending mail via the smarthost + +After creating the file, run the command: + +postmap /etc/postfix/sender_canonical + +and add the following line to main.cf: + +sender_canonical_maps = hash:/etc/postfix/sender_canonical + +To use regular expressions to match multiple users, use either 'regexp' or +'pcre' (requires the installation of 'postfix-pcre') tables. See +DATABASE_README, regexp_table(5), PCRE_README, pcre_table(5), and postmap(1). + +4b. SMTP generic mapping + +With SMTP generic mapping, all matching addresses are rewritten upon Postfix's +delivery of the mail via SMTP. Create an arbitrarily named file (e.g., +'/etc/postfix/generic_mapping'), containing a line of the form: + +@host.domain username@example.com + +with 'host.domain' taken from '/etc/mailname'. + +After creating the file, run the command: + +postmap /etc/postfix/generic_mapping + +and add the following line to main.cf: + +sender_generic_maps = hash:/etc/postfix/generic_mapping + +One advantage to using generic over canonical mapping is that the latter will +be applied to local mail as well. If the system will be configured to send all +mail, even mail addressed to local users, via the smarthost (e.g., via +aliases), then this point is moot. + +Some mail services can be quite picky about what form of the email header From: +they accept. It may be necessary to use an additional smtp_header_check rule to +rewrite the header From: (whether created by the original sender, or by Postfix +itself) into a form that the mail provider will accept. See: + +https://marc.info/?l=postfix-users&m=154662599103646 +https://marc.info/?l=postfix-users&m=154656149717210 + +See the ADDRESS_REWRITING_README for more information. + +At this point, restart Postfix: + +/etc/init.d/postfix restart + +Test: + +echo 'test' | sendmail someuser@somehost.com + +5. Aliases + +As configured so far, local mail will be delivered locally and not sent via the +smarthost. To redirect local mail through the smarthost, aliases can be used. +In /etc/aliases, add lines like the following: + +root: someuser@somehost.com + +Then run: + +newaliases + +6. CREDITS: + +This guide was based (with considerable elaboration) on a number of other +guides on this topic (in addition to the official Postfix documentation), +including: + +https://www.eanderalx.org/linux/postfix +http://emanuelesantanche.com/article/85/configuring-postfix-to-relay-email-through-zoho-mail +https://www.dnsexit.com/support/mailrelay/postfix.html +https://www.cyberciti.biz/faq/postfix-smtp-authentication-for-mail-servers/ +https://blog.bravi.org/?p=1065 |