summaryrefslogtreecommitdiffstats
path: root/README_FILES/SOHO_README
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--README_FILES/SOHO_README288
1 files changed, 288 insertions, 0 deletions
diff --git a/README_FILES/SOHO_README b/README_FILES/SOHO_README
new file mode 100644
index 0000000..722bece
--- /dev/null
+++ b/README_FILES/SOHO_README
@@ -0,0 +1,288 @@
+PPoossttffiixx SSmmaallll//HHoommee OOffffiiccee HHiinnttss aanndd TTiippss
+
+-------------------------------------------------------------------------------
+
+OOvveerrvviieeww
+
+This document combines hints and tips for "small office/home office"
+applications into one document so that they are easier to find. The text
+describes the mail sending side only. If your machine does not receive mail
+directly (i.e. it does not have its own Internet domain name and its own fixed
+IP address), then you will need a solution such as "fetchmail", which is
+outside the scope of the Postfix documentation.
+
+ * Selected topics from the STANDARD_CONFIGURATION_README document:
+
+ o Postfix on a stand-alone Internet host
+ o Postfix on hosts without a real Internet hostname
+
+ Selected topics from the SASL_README document:
+
+ o Enabling SASL authentication in the Postfix SMTP client
+ o Configuring Sender-Dependent SASL authentication
+
+See the SASL_README and STANDARD_CONFIGURATION_README documents for further
+information on these topics.
+
+PPoossttffiixx oonn aa ssttaanndd--aalloonnee IInntteerrnneett hhoosstt
+
+Postfix should work out of the box without change on a stand-alone machine that
+has direct Internet access. At least, that is how Postfix installs when you
+download the Postfix source code via http://www.postfix.org/.
+
+You can use the command "ppoossttccoonnff --nn" to find out what settings are overruled
+by your main.cf. Besides a few pathname settings, few parameters should be set
+on a stand-alone box, beyond what is covered in the BASIC_CONFIGURATION_README
+document:
+
+ /etc/postfix/main.cf:
+ # Optional: send mail as user@domainname instead of user@hostname.
+ #myorigin = $mydomain
+
+ # Optional: specify NAT/proxy external address.
+ #proxy_interfaces = 1.2.3.4
+
+ # Alternative 1: don't relay mail from other hosts.
+ mynetworks_style = host
+ relay_domains =
+
+ # Alternative 2: relay mail from local clients only.
+ # mynetworks = 192.168.1.0/28
+ # relay_domains =
+
+See also the section "Postfix on hosts without a real Internet hostname" if
+this is applicable to your configuration.
+
+PPoossttffiixx oonn hhoossttss wwiitthhoouutt aa rreeaall IInntteerrnneett hhoossttnnaammee
+
+This section is for hosts that don't have their own Internet hostname.
+Typically these are systems that get a dynamic IP address via DHCP or via
+dialup. Postfix will let you send and receive mail just fine between accounts
+on a machine with a fantasy name. However, you cannot use a fantasy hostname in
+your email address when sending mail into the Internet, because no-one would be
+able to reply to your mail. In fact, more and more sites refuse mail addresses
+with non-existent domain names.
+
+Note: the following information is Postfix version dependent. To find out what
+Postfix version you have, execute the command "ppoossttccoonnff mmaaiill__vveerrssiioonn".
+
+SSoolluuttiioonn 11:: PPoossttffiixx vveerrssiioonn 22..22 aanndd llaatteerr
+
+Postfix 2.2 uses the generic(5) address mapping to replace local fantasy email
+addresses by valid Internet addresses. This mapping happens ONLY when mail
+leaves the machine; not when you send mail between users on the same machine.
+
+The following example presents additional configuration. You need to combine
+this with basic configuration information as discussed the first half of this
+document.
+
+ 1 /etc/postfix/main.cf:
+ 2 smtp_generic_maps = hash:/etc/postfix/generic
+ 3
+ 4 /etc/postfix/generic:
+ 5 his@localdomain.local hisaccount@hisisp.example
+ 6 her@localdomain.local heraccount@herisp.example
+ 7 @localdomain.local hisaccount+local@hisisp.example
+
+When mail is sent to a remote host via SMTP:
+
+ * Line 5 replaces his@localdomain.local by his ISP mail address,
+
+ * Line 6 replaces her@localdomain.local by her ISP mail address, and
+
+ * Line 7 replaces other local addresses by his ISP account, with an address
+ extension of +local (this example assumes that the ISP supports "+" style
+ address extensions).
+
+Specify ddbbmm instead of hhaasshh if your system uses ddbbmm files instead of ddbb files.
+To find out what lookup tables Postfix supports, use the command "ppoossttccoonnff --mm".
+
+Execute the command "ppoossttmmaapp //eettcc//ppoossttffiixx//ggeenneerriicc" whenever you change the
+generic table.
+
+SSoolluuttiioonn 22:: PPoossttffiixx vveerrssiioonn 22..11 aanndd eeaarrlliieerr
+
+The solution with older Postfix systems is to use valid Internet addresses
+where possible, and to let Postfix map valid Internet addresses to local
+fantasy addresses. With this, you can send mail to the Internet and to local
+fantasy addresses, including mail to local fantasy addresses that don't have a
+valid Internet address of their own.
+
+The following example presents additional configuration. You need to combine
+this with basic configuration information as discussed the first half of this
+document.
+
+ 1 /etc/postfix/main.cf:
+ 2 myhostname = hostname.localdomain
+ 3 mydomain = localdomain
+ 4
+ 5 canonical_maps = hash:/etc/postfix/canonical
+ 6
+ 7 virtual_alias_maps = hash:/etc/postfix/virtual
+ 8
+ 9 /etc/postfix/canonical:
+ 10 your-login-name your-account@your-isp.com
+ 11
+ 12 /etc/postfix/virtual:
+ 13 your-account@your-isp.com your-login-name
+
+Translation:
+
+ * Lines 2-3: Substitute your fantasy hostname here. Do not use a domain name
+ that is already in use by real organizations on the Internet. See RFC 2606
+ for examples of domain names that are guaranteed not to be owned by anyone.
+
+ * Lines 5, 9, 10: This provides the mapping from "your-login-
+ name@hostname.localdomain" to "your-account@your-isp.com". This part is
+ required.
+
+ * Lines 7, 12, 13: Deliver mail for "your-account@your-isp.com" locally,
+ instead of sending it to the ISP. This part is not required but is
+ convenient.
+
+Specify ddbbmm instead of hhaasshh if your system uses ddbbmm files instead of ddbb files.
+To find out what lookup tables Postfix supports, use the command "ppoossttccoonnff --mm".
+
+Execute the command "ppoossttmmaapp //eettcc//ppoossttffiixx//ccaannoonniiccaall" whenever you change the
+canonical table.
+
+Execute the command "ppoossttmmaapp //eettcc//ppoossttffiixx//vviirrttuuaall" whenever you change the
+virtual table.
+
+EEnnaabblliinngg SSAASSLL aauutthheennttiiccaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP//LLMMTTPP cclliieenntt
+
+This section shows a typical scenario where the Postfix SMTP client sends all
+messages via a mail gateway server that requires SASL authentication.
+
+ TTrroouubbllee ssoollvviinngg ttiippss::
+
+ * If your SASL logins fail with "SASL authentication failure: No worthy
+ mechs found" in the mail logfile, then see the section "Postfix SMTP/
+ LMTP client policy - SASL mechanism pprrooppeerrttiieess".
+
+ * For a solution to a more obscure class of SASL authentication failures,
+ see "Postfix SMTP/LMTP client policy - SASL mechanism nnaammeess".
+
+To make the example more readable we introduce it in two parts. The first part
+takes care of the basic configuration, while the second part sets up the
+username/password information.
+
+ /etc/postfix/main.cf:
+ smtp_sasl_auth_enable = yes
+ smtp_tls_security_level = encrypt
+ smtp_sasl_tls_security_options = noanonymous
+ relayhost = [mail.isp.example]
+ # Alternative form:
+ # relayhost = [mail.isp.example]:submission
+ smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
+
+ * The smtp_sasl_auth_enable setting enables client-side authentication. We
+ will configure the client's username and password information in the second
+ part of the example.
+
+ * The smtp_tls_security_level setting ensures that the connection to the
+ remote smtp server will be encrypted, and smtp_sasl_tls_security_options
+ removes the prohibition on plaintext passwords.
+
+ * The relayhost setting forces the Postfix SMTP to send all remote messages
+ to the specified mail server instead of trying to deliver them directly to
+ their destination.
+
+ * In the relayhost setting, the "[" and "]" prevent the Postfix SMTP client
+ from looking up MX (mail exchanger) records for the enclosed name.
+
+ * The relayhost destination may also specify a non-default TCP port. For
+ example, the alternative form [mail.isp.example]:submission tells Postfix
+ to connect to TCP network port 587, which is reserved for email client
+ applications.
+
+ * The Postfix SMTP client is compatible with SMTP servers that use the non-
+ standard "AUTH=mmeetthhoodd....." syntax in response to the EHLO command; this
+ requires no additional Postfix client configuration.
+
+ * The Postfix SMTP client does not support the obsolete "wrappermode"
+ protocol, which uses TCP port 465 on the SMTP server. See TLS_README for a
+ solution that uses the stunnel command.
+
+ * With the smtp_sasl_password_maps parameter, we configure the Postfix SMTP
+ client to send username and password information to the mail gateway
+ server. As discussed in the next section, the Postfix SMTP client supports
+ multiple ISP accounts. For this reason the username and password are stored
+ in a table that contains one username/password combination for each mail
+ gateway server.
+
+ /etc/postfix/sasl_passwd:
+ # destination credentials
+ [mail.isp.example] username:password
+ # Alternative form:
+ # [mail.isp.example]:submission username:password
+
+ IImmppoorrttaanntt
+
+ Keep the SASL client password file in /etc/postfix, and make the file
+ read+write only for root to protect the username/password combinations
+ against other users. The Postfix SMTP client will still be able to read the
+ SASL client passwords. It opens the file as user root before it drops
+ privileges, and before entering an optional chroot jail.
+
+ * Use the postmap command whenever you change the /etc/postfix/sasl_passwd
+ file.
+
+ * If you specify the "[" and "]" in the relayhost destination, then you must
+ use the same form in the smtp_sasl_password_maps file.
+
+ * If you specify a non-default TCP Port (such as ":submission" or ":587") in
+ the relayhost destination, then you must use the same form in the
+ smtp_sasl_password_maps file.
+
+CCoonnffiigguurriinngg SSeennddeerr--DDeeppeennddeenntt SSAASSLL aauutthheennttiiccaattiioonn
+
+Postfix supports different ISP accounts for different sender addresses (version
+2.3 and later). This can be useful when one person uses the same machine for
+work and for personal use, or when people with different ISP accounts share the
+same Postfix server.
+
+To make this possible, Postfix supports per-sender SASL passwords and per-
+sender relay hosts. In the example below, the Postfix SMTP client will search
+the SASL password file by sender address before it searches that same file by
+destination. Likewise, the Postfix trivial-rewrite(8) daemon will search the
+per-sender relayhost file, and use the default relayhost setting only as a
+final resort.
+
+ /etc/postfix/main.cf:
+ smtp_sender_dependent_authentication = yes
+ sender_dependent_relayhost_maps = hash:/etc/postfix/sender_relay
+ smtp_sasl_auth_enable = yes
+ smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
+ relayhost = [mail.isp.example]
+ # Alternative form:
+ # relayhost = [mail.isp.example]:submission
+
+ /etc/postfix/sasl_passwd:
+ # Per-sender authentication; see also /etc/postfix/sender_relay.
+ user1@example.com username1:password1
+ user2@example.net username2:password2
+ # Login information for the default relayhost.
+ [mail.isp.example] username:password
+ # Alternative form:
+ # [mail.isp.example]:submission username:password
+
+ /etc/postfix/sender_relay:
+ # Per-sender provider; see also /etc/postfix/sasl_passwd.
+ user1@example.com [mail.example.com]:submission
+ user2@example.net [mail.example.net]
+
+ * If you are creative, then you can try to combine the two tables into one
+ single MySQL database, and configure different Postfix queries to extract
+ the appropriate information.
+
+ * Specify dbm instead of hash if your system uses dbm files instead of db
+ files. To find out what lookup tables Postfix supports, use the command
+ "postconf -m".
+
+ * Execute the command "postmap /etc/postfix/sasl_passwd" whenever you change
+ the sasl_passwd table.
+
+ * Execute the command "postmap /etc/postfix/sender_relay" whenever you change
+ the sender_relay table.
+