diff options
Diffstat (limited to 'proto/pcre_table')
| -rw-r--r-- | proto/pcre_table | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/proto/pcre_table b/proto/pcre_table new file mode 100644 index 0000000..7f15a81 --- /dev/null +++ b/proto/pcre_table @@ -0,0 +1,210 @@ +#++ +# NAME +# pcre_table 5 +# SUMMARY +# format of Postfix PCRE tables +# SYNOPSIS +# \fBpostmap -q "\fIstring\fB" pcre:/etc/postfix/\fIfilename\fR +# +# \fBpostmap -q - pcre:/etc/postfix/\fIfilename\fB <\fIinputfile\fR +# +# \fBpostmap -hmq - pcre:/etc/postfix/\fIfilename\fB <\fIinputfile\fR +# +# \fBpostmap -bmq - pcre:/etc/postfix/\fIfilename\fB <\fIinputfile\fR +# DESCRIPTION +# The Postfix mail system uses optional tables for address +# rewriting, mail routing, or access control. These tables +# are usually in \fBdbm\fR or \fBdb\fR format. +# +# Alternatively, lookup tables can be specified in Perl Compatible +# Regular Expression form. In this case, each input is compared +# against a list of patterns. When a match is found, the +# corresponding result is returned and the search is terminated. +# +# To find out what types of lookup tables your Postfix system +# supports use the "\fBpostconf -m\fR" command. +# +# To test lookup tables, use the "\fBpostmap -q\fR" command +# as described in the SYNOPSIS above. Use "\fBpostmap -hmq +# -\fR <\fIfile\fR" for header_checks(5) patterns, and +# "\fBpostmap -bmq -\fR <\fIfile\fR" for body_checks(5) +# (Postfix 2.6 and later). +# COMPATIBILITY +# .ad +# .fi +# With Postfix version 2.2 and earlier specify "\fBpostmap +# -fq\fR" to query a table that contains case sensitive +# patterns. Patterns are case insensitive by default. +# TABLE FORMAT +# .ad +# .fi +# The general form of a PCRE table is: +# .IP "\fB/\fIpattern\fB/\fIflags result\fR" +# When \fIpattern\fR matches the input string, use +# the corresponding \fIresult\fR value. +# .IP "\fB!/\fIpattern\fB/\fIflags result\fR" +# When \fIpattern\fR does \fBnot\fR match the input string, use +# the corresponding \fIresult\fR value. +# .IP "\fBif /\fIpattern\fB/\fIflags\fR" +# .IP "\fBendif\fR" +# If the input string matches /\fIpattern\fR/, then match that +# input string against the patterns between \fBif\fR and +# \fBendif\fR. The \fBif\fR..\fBendif\fR can nest. +# .sp +# Note: do not prepend whitespace to patterns inside +# \fBif\fR..\fBendif\fR. +# .sp +# This feature is available in Postfix 2.1 and later. +# .IP "\fBif !/\fIpattern\fB/\fIflags\fR" +# .IP "\fBendif\fR" +# If the input string does not match /\fIpattern\fR/, then +# match that input string against the patterns between \fBif\fR +# and \fBendif\fR. The \fBif\fR..\fBendif\fR can nest. +# .sp +# Note: do not prepend whitespace to patterns inside +# \fBif\fR..\fBendif\fR. +# .sp +# This feature is available in Postfix 2.1 and later. +# .IP "blank lines and comments" +# Empty lines and whitespace-only lines are ignored, as +# are lines whose first non-whitespace character is a `#'. +# .IP "multi-line text" +# A logical line starts with non-whitespace text. A line that +# starts with whitespace continues a logical line. +# .PP +# Each pattern is a perl-like regular expression. The expression +# delimiter can be any non-alphanumerical character, except +# whitespace or characters +# that have special meaning (traditionally the forward slash is used). +# The regular expression can contain whitespace. +# +# By default, matching is case-insensitive, and newlines are not +# treated as special characters. The behavior is controlled by flags, +# which are toggled by appending one or more of the following +# characters after the pattern: +# .IP "\fBi\fR (default: on)" +# Toggles the case sensitivity flag. By default, matching is case +# insensitive. +# .IP "\fBm\fR (default: off)" +# Toggles the PCRE_MULTILINE flag. When this flag is on, the \fB^\fR +# and \fB$\fR metacharacters match immediately after and immediately +# before a newline character, respectively, in addition to +# matching at the start and end of the subject string. +# .IP "\fBs\fR (default: on)" +# Toggles the PCRE_DOTALL flag. When this flag is on, the \fB.\fR +# metacharacter matches the newline character. With +# Postfix versions prior to 2.0, the flag is off by +# default, which is inconvenient for multi-line message header +# matching. +# .IP "\fBx\fR (default: off)" +# Toggles the pcre extended flag. When this flag is on, whitespace +# characters in the pattern (other than in a character class) +# are ignored. To include a whitespace character as part of +# the pattern, escape it with backslash. +# .sp +# Note: do not use \fB#\fIcomment\fR after patterns. +# .IP "\fBA\fR (default: off)" +# Toggles the PCRE_ANCHORED flag. When this flag is on, +# the pattern is forced to be "anchored", that is, it is +# constrained to match only at the start of the string which +# is being searched (the "subject string"). This effect can +# also be achieved by appropriate constructs in the pattern +# itself. +# .IP "\fBE\fR (default: off)" +# Toggles the PCRE_DOLLAR_ENDONLY flag. When this flag is on, +# a \fB$\fR metacharacter in the pattern matches only at the +# end of the subject string. Without this flag, a dollar also +# matches immediately before the final character if it is a +# newline character (but not before any other newline +# characters). This flag is ignored if PCRE_MULTILINE +# flag is set. +# .IP "\fBU\fR (default: off)" +# Toggles the ungreedy matching flag. When this flag is on, +# the pattern matching engine inverts the "greediness" of +# the quantifiers so that they are not greedy by default, +# but become greedy if followed by "?". This flag can also +# set by a (?U) modifier within the pattern. +# .IP "\fBX\fR (default: off)" +# Toggles the PCRE_EXTRA flag. +# When this flag is on, any backslash in a pattern that is +# followed by a letter that has no special meaning causes an +# error, thus reserving these combinations for future expansion. +# SEARCH ORDER +# .ad +# .fi +# Patterns are applied in the order as specified in the table, until a +# pattern is found that matches the input string. +# +# Each pattern is applied to the entire input string. +# Depending on the application, that string is an entire client +# hostname, an entire client IP address, or an entire mail address. +# Thus, no parent domain or parent network search is done, and +# \fIuser@domain\fR mail addresses are not broken up into their +# \fIuser\fR and \fIdomain\fR constituent parts, nor is \fIuser+foo\fR +# broken up into \fIuser\fR and \fIfoo\fR. +# TEXT SUBSTITUTION +# .ad +# .fi +# Substitution of substrings (text that matches patterns +# inside "()") from the matched expression into the result +# string is requested with $1, $2, etc.; specify $$ to produce +# a $ character as output. +# The macros in the result string may need to be written as +# ${n} or $(n) if they aren't followed by whitespace. +# +# Note: since negated patterns (those preceded by \fB!\fR) return a +# result when the expression does not match, substitutions are not +# available for negated patterns. +# EXAMPLE SMTPD ACCESS MAP +# # Protect your outgoing majordomo exploders +# /^(?!owner-)(.*)-outgoing@(.*)/ 550 Use ${1}@${2} instead +# +# # Bounce friend@whatever, except when whatever is our domain (you would +# # be better just bouncing all friend@ mail - this is just an example). +# /^(friend@(?!my\\.domain$).*)$/ 550 Stick this in your pipe $1 +# +# # A multi-line entry. The text is sent as one line. +# # +# /^noddy@my\\.domain$/ +# \ 550 This user is a funny one. You really don't want to send mail to +# \ them as it only makes their head spin. +# EXAMPLE HEADER FILTER MAP +# /^Subject: make money fast/ REJECT +# /^To: friend@public\\.com/ REJECT +# EXAMPLE BODY FILTER MAP +# # First skip over base 64 encoded text to save CPU cycles. +# # Requires PCRE version 3. +# ~^[[:alnum:]+/]{60,}$~ OK +# +# # Put your own body patterns here. +# SEE ALSO +# postmap(1), Postfix lookup table manager +# postconf(5), configuration parameters +# regexp_table(5), format of POSIX regular expression tables +# README FILES +# .ad +# .fi +# Use "\fBpostconf readme_directory\fR" or +# "\fBpostconf html_directory\fR" to locate this information. +# .na +# .nf +# DATABASE_README, Postfix lookup table overview +# AUTHOR(S) +# The PCRE table lookup code was originally written by: +# Andrew McNamara +# andrewm@connect.com.au +# connect.com.au Pty. Ltd. +# Level 3, 213 Miller St +# North Sydney, NSW, Australia +# +# Adopted and adapted by: +# Wietse Venema +# IBM T.J. Watson Research +# P.O. Box 704 +# Yorktown Heights, NY 10598, USA +# +# Wietse Venema +# Google, Inc. +# 111 8th Avenue +# New York, NY 10011, USA +#-- |