diff options
Diffstat (limited to '')
l--------- | src/pickup/.indent.pro | 1 | ||||
-rw-r--r-- | src/pickup/.printfck | 25 | ||||
-rw-r--r-- | src/pickup/Makefile.in | 93 | ||||
-rw-r--r-- | src/pickup/pickup.c | 624 |
4 files changed, 743 insertions, 0 deletions
diff --git a/src/pickup/.indent.pro b/src/pickup/.indent.pro new file mode 120000 index 0000000..5c837ec --- /dev/null +++ b/src/pickup/.indent.pro @@ -0,0 +1 @@ +../../.indent.pro
\ No newline at end of file diff --git a/src/pickup/.printfck b/src/pickup/.printfck new file mode 100644 index 0000000..66016ed --- /dev/null +++ b/src/pickup/.printfck @@ -0,0 +1,25 @@ +been_here_xt 2 0 +bounce_append 5 0 +cleanup_out_format 1 0 +defer_append 5 0 +mail_command 1 0 +mail_print 1 0 +msg_error 0 0 +msg_fatal 0 0 +msg_info 0 0 +msg_panic 0 0 +msg_warn 0 0 +opened 4 0 +post_mail_fprintf 1 0 +qmgr_message_bounce 2 0 +rec_fprintf 2 0 +sent 4 0 +smtp_cmd 1 0 +smtp_mesg_fail 2 0 +smtp_printf 1 0 +smtp_rcpt_fail 3 0 +smtp_site_fail 2 0 +udp_syslog 1 0 +vstream_fprintf 1 0 +vstream_printf 0 0 +vstring_sprintf 1 0 diff --git a/src/pickup/Makefile.in b/src/pickup/Makefile.in new file mode 100644 index 0000000..dbd0150 --- /dev/null +++ b/src/pickup/Makefile.in @@ -0,0 +1,93 @@ +SHELL = /bin/sh +SRCS = pickup.c +OBJS = pickup.o +HDRS = +TESTSRC = +DEFS = -I. -I$(INC_DIR) -D$(SYSTYPE) +CFLAGS = $(DEBUG) $(OPT) $(DEFS) +TESTPROG= +PROG = pickup +INC_DIR = ../../include +LIBS = ../../lib/lib$(LIB_PREFIX)master$(LIB_SUFFIX) \ + ../../lib/lib$(LIB_PREFIX)global$(LIB_SUFFIX) \ + ../../lib/lib$(LIB_PREFIX)util$(LIB_SUFFIX) + +.c.o:; $(CC) $(CFLAGS) -c $*.c + +$(PROG): $(OBJS) $(LIBS) + $(CC) $(CFLAGS) $(SHLIB_RPATH) -o $@ $(OBJS) $(LIBS) $(SYSLIBS) + +$(OBJS): ../../conf/makedefs.out + +Makefile: Makefile.in + cat ../../conf/makedefs.out $? >$@ + +test: $(TESTPROG) + +tests: + +root_tests: + +update: ../../libexec/$(PROG) + +../../libexec/$(PROG): $(PROG) + cp $(PROG) ../../libexec + +printfck: $(OBJS) $(PROG) + rm -rf printfck + mkdir printfck + sed '1,/^# do not edit/!d' Makefile >printfck/Makefile + set -e; for i in *.c; do printfck -f .printfck $$i >printfck/$$i; done + cd printfck; make "INC_DIR=../../../include" `cd ..; ls *.o` + +lint: + lint $(DEFS) $(SRCS) $(LINTFIX) + +clean: + rm -f *.o *core $(PROG) $(TESTPROG) junk + rm -rf printfck + +tidy: clean + +depend: $(MAKES) + (sed '1,/^# do not edit/!d' Makefile.in; \ + set -e; for i in [a-z][a-z0-9]*.c; do \ + $(CC) -E $(DEFS) $(INCL) $$i | grep -v '[<>]' | sed -n -e '/^# *1 *"\([^"]*\)".*/{' \ + -e 's//'`echo $$i|sed 's/c$$/o/'`': \1/' \ + -e 's/o: \.\//o: /' -e p -e '}' ; \ + done | LANG=C sort -u) | grep -v '[.][o][:][ ][/]' >$$$$ && mv $$$$ Makefile.in + @$(EXPORT) make -f Makefile.in Makefile 1>&2 + +# do not edit below this line - it is generated by 'make depend' +pickup.o: ../../include/attr.h +pickup.o: ../../include/check_arg.h +pickup.o: ../../include/cleanup_user.h +pickup.o: ../../include/htable.h +pickup.o: ../../include/input_transp.h +pickup.o: ../../include/iostuff.h +pickup.o: ../../include/lex_822.h +pickup.o: ../../include/mail_conf.h +pickup.o: ../../include/mail_date.h +pickup.o: ../../include/mail_open_ok.h +pickup.o: ../../include/mail_params.h +pickup.o: ../../include/mail_proto.h +pickup.o: ../../include/mail_queue.h +pickup.o: ../../include/mail_server.h +pickup.o: ../../include/mail_version.h +pickup.o: ../../include/msg.h +pickup.o: ../../include/mymalloc.h +pickup.o: ../../include/nvtable.h +pickup.o: ../../include/rec_attr_map.h +pickup.o: ../../include/rec_type.h +pickup.o: ../../include/record.h +pickup.o: ../../include/safe_open.h +pickup.o: ../../include/scan_dir.h +pickup.o: ../../include/set_ugid.h +pickup.o: ../../include/smtputf8.h +pickup.o: ../../include/stringops.h +pickup.o: ../../include/sys_defs.h +pickup.o: ../../include/vbuf.h +pickup.o: ../../include/vstream.h +pickup.o: ../../include/vstring.h +pickup.o: ../../include/watchdog.h +pickup.o: pickup.c diff --git a/src/pickup/pickup.c b/src/pickup/pickup.c new file mode 100644 index 0000000..ebbe504 --- /dev/null +++ b/src/pickup/pickup.c @@ -0,0 +1,624 @@ +/*++ +/* NAME +/* pickup 8 +/* SUMMARY +/* Postfix local mail pickup +/* SYNOPSIS +/* \fBpickup\fR [generic Postfix daemon options] +/* DESCRIPTION +/* The \fBpickup\fR(8) daemon waits for hints that new mail has been +/* dropped into the \fBmaildrop\fR directory, and feeds it into the +/* \fBcleanup\fR(8) daemon. +/* Ill-formatted files are deleted without notifying the originator. +/* This program expects to be run from the \fBmaster\fR(8) process +/* manager. +/* STANDARDS +/* .ad +/* .fi +/* None. The \fBpickup\fR(8) daemon does not interact with +/* the outside world. +/* SECURITY +/* .ad +/* .fi +/* The \fBpickup\fR(8) daemon is moderately security sensitive. It runs +/* with fixed low privilege and can run in a chrooted environment. +/* However, the program reads files from potentially hostile users. +/* The \fBpickup\fR(8) daemon opens no files for writing, is careful about +/* what files it opens for reading, and does not actually touch any data +/* that is sent to its public service endpoint. +/* DIAGNOSTICS +/* Problems and transactions are logged to \fBsyslogd\fR(8) +/* or \fBpostlogd\fR(8). +/* BUGS +/* The \fBpickup\fR(8) daemon copies mail from file to the \fBcleanup\fR(8) +/* daemon. It could avoid message copying overhead by sending a file +/* descriptor instead of file data, but then the already complex +/* \fBcleanup\fR(8) daemon would have to deal with unfiltered user data. +/* CONFIGURATION PARAMETERS +/* .ad +/* .fi +/* As the \fBpickup\fR(8) daemon is a relatively long-running process, up +/* to an hour may pass before a \fBmain.cf\fR change takes effect. +/* Use the command "\fBpostfix reload\fR" command to speed up a change. +/* +/* The text below provides only a parameter summary. See +/* \fBpostconf\fR(5) for more details including examples. +/* CONTENT INSPECTION CONTROLS +/* .ad +/* .fi +/* .IP "\fBcontent_filter (empty)\fR" +/* After the message is queued, send the entire message to the +/* specified \fItransport:destination\fR. +/* .IP "\fBreceive_override_options (empty)\fR" +/* Enable or disable recipient validation, built-in content +/* filtering, or address mapping. +/* MISCELLANEOUS CONTROLS +/* .ad +/* .fi +/* .IP "\fBconfig_directory (see 'postconf -d' output)\fR" +/* The default location of the Postfix main.cf and master.cf +/* configuration files. +/* .IP "\fBipc_timeout (3600s)\fR" +/* The time limit for sending or receiving information over an internal +/* communication channel. +/* .IP "\fBline_length_limit (2048)\fR" +/* Upon input, long lines are chopped up into pieces of at most +/* this length; upon delivery, long lines are reconstructed. +/* .IP "\fBmax_idle (100s)\fR" +/* The maximum amount of time that an idle Postfix daemon process waits +/* for an incoming connection before terminating voluntarily. +/* .IP "\fBmax_use (100)\fR" +/* The maximal number of incoming connections that a Postfix daemon +/* process will service before terminating voluntarily. +/* .IP "\fBprocess_id (read-only)\fR" +/* The process ID of a Postfix command or daemon process. +/* .IP "\fBprocess_name (read-only)\fR" +/* The process name of a Postfix command or daemon process. +/* .IP "\fBqueue_directory (see 'postconf -d' output)\fR" +/* The location of the Postfix top-level queue directory. +/* .IP "\fBsyslog_facility (mail)\fR" +/* The syslog facility of Postfix logging. +/* .IP "\fBsyslog_name (see 'postconf -d' output)\fR" +/* A prefix that is prepended to the process name in syslog +/* records, so that, for example, "smtpd" becomes "prefix/smtpd". +/* .PP +/* Available in Postfix 3.3 and later: +/* .IP "\fBservice_name (read-only)\fR" +/* The master.cf service name of a Postfix daemon process. +/* SEE ALSO +/* cleanup(8), message canonicalization +/* sendmail(1), Sendmail-compatible interface +/* postdrop(1), mail posting agent +/* postconf(5), configuration parameters +/* master(5), generic daemon options +/* master(8), process manager +/* postlogd(8), Postfix logging +/* syslogd(8), system logging +/* LICENSE +/* .ad +/* .fi +/* The Secure Mailer license must be distributed with this software. +/* AUTHOR(S) +/* Wietse Venema +/* IBM T.J. Watson Research +/* P.O. Box 704 +/* Yorktown Heights, NY 10598, USA +/* +/* Wietse Venema +/* Google, Inc. +/* 111 8th Avenue +/* New York, NY 10011, USA +/*--*/ + +/* System library. */ + +#include <sys_defs.h> +#include <sys/stat.h> +#include <dirent.h> +#include <unistd.h> +#include <stdlib.h> +#include <time.h> +#include <string.h> +#include <fcntl.h> +#include <errno.h> +#include <ctype.h> + +/* Utility library. */ + +#include <msg.h> +#include <scan_dir.h> +#include <vstring.h> +#include <vstream.h> +#include <set_ugid.h> +#include <safe_open.h> +#include <watchdog.h> +#include <stringops.h> + +/* Global library. */ + +#include <mail_queue.h> +#include <mail_open_ok.h> +#include <mymalloc.h> +#include <mail_proto.h> +#include <cleanup_user.h> +#include <mail_date.h> +#include <mail_params.h> +#include <mail_conf.h> +#include <record.h> +#include <rec_type.h> +#include <lex_822.h> +#include <input_transp.h> +#include <rec_attr_map.h> +#include <mail_version.h> +#include <smtputf8.h> + +/* Single-threaded server skeleton. */ + +#include <mail_server.h> + +/* Application-specific. */ + +char *var_filter_xport; +char *var_input_transp; + + /* + * Structure to bundle a bunch of information about a queue file. + */ +typedef struct { + char *id; /* queue file basename */ + struct stat st; /* queue file status */ + char *path; /* name for open/remove */ + char *sender; /* sender address */ +} PICKUP_INFO; + + /* + * What action should be taken after attempting to deliver a message: remove + * the file from the maildrop, or leave it alone. The latter is also used + * for files that are still being written to. + */ +#define REMOVE_MESSAGE_FILE 1 +#define KEEP_MESSAGE_FILE 2 + + /* + * Transparency: before mail is queued, do we allow address mapping, + * automatic bcc, header/body checks? + */ +int pickup_input_transp_mask; + +/* file_read_error - handle error while reading queue file */ + +static int file_read_error(PICKUP_INFO *info, int type) +{ + msg_warn("uid=%ld: unexpected or malformed record type %d", + (long) info->st.st_uid, type); + return (REMOVE_MESSAGE_FILE); +} + +/* cleanup_service_error_reason - handle error writing to cleanup service. */ + +static int cleanup_service_error_reason(PICKUP_INFO *info, int status, + const char *reason) +{ + + /* + * XXX If the cleanup server gave a reason, then it was already logged. + * Don't bother logging it another time. + * + * XXX Discard a message without recipient. This can happen with "postsuper + * -r" when a message is already delivered (or bounced). The Postfix + * sendmail command rejects submissions without recipients. + */ + if (reason == 0 || *reason == 0) + msg_warn("%s: error writing %s: %s", + info->path, info->id, cleanup_strerror(status)); + return ((status & (CLEANUP_STAT_BAD | CLEANUP_STAT_RCPT)) ? + REMOVE_MESSAGE_FILE : KEEP_MESSAGE_FILE); +} + +#define cleanup_service_error(info, status) \ + cleanup_service_error_reason((info), (status), (char *) 0) + +/* copy_segment - copy a record group */ + +static int copy_segment(VSTREAM *qfile, VSTREAM *cleanup, PICKUP_INFO *info, + VSTRING *buf, char *expected) +{ + int type; + int check_first = (*expected == REC_TYPE_CONTENT[0]); + int time_seen = 0; + char *attr_name; + char *attr_value; + char *saved_attr; + int skip_attr; + + /* + * Limit the input record size. All front-end programs should protect the + * mail system against unreasonable inputs. This also requires that we + * limit the size of envelope records written by the local posting agent. + * + * Records with named attributes are filtered by postdrop(1). + * + * We must allow PTR records here because of "postsuper -r". + */ + for (;;) { + if ((type = rec_get(qfile, buf, var_line_limit)) < 0 + || strchr(expected, type) == 0) + return (file_read_error(info, type)); + if (msg_verbose) + msg_info("%s: read %c %s", info->id, type, vstring_str(buf)); + if (type == *expected) + break; + if (type == REC_TYPE_FROM) { + if (info->sender == 0) + info->sender = mystrdup(vstring_str(buf)); + /* Compatibility with Postfix < 2.3. */ + if (time_seen == 0) + rec_fprintf(cleanup, REC_TYPE_TIME, "%ld", + (long) info->st.st_mtime); + } + if (type == REC_TYPE_TIME) + time_seen = 1; + + /* + * XXX Workaround: REC_TYPE_FILT (used in envelopes) == REC_TYPE_CONT + * (used in message content). + * + * As documented in postsuper(1), ignore content filter record. + */ + if (*expected != REC_TYPE_CONTENT[0]) { + if (type == REC_TYPE_FILT) + /* Discard FILTER record after "postsuper -r". */ + continue; + if (type == REC_TYPE_RDR) + /* Discard REDIRECT record after "postsuper -r". */ + continue; + } + if (*expected == REC_TYPE_EXTRACT[0]) { + if (type == REC_TYPE_RRTO) + /* Discard return-receipt record after "postsuper -r". */ + continue; + if (type == REC_TYPE_ERTO) + /* Discard errors-to record after "postsuper -r". */ + continue; + if (type == REC_TYPE_ATTR) { + saved_attr = mystrdup(vstring_str(buf)); + skip_attr = (split_nameval(saved_attr, + &attr_name, &attr_value) == 0 + && rec_attr_map(attr_name) == 0); + myfree(saved_attr); + /* Discard other/header/body action after "postsuper -r". */ + if (skip_attr) + continue; + } + } + + /* + * XXX Force an empty record when the queue file content begins with + * whitespace, so that it won't be considered as being part of our + * own Received: header. What an ugly Kluge. + */ + if (check_first + && (type == REC_TYPE_NORM || type == REC_TYPE_CONT)) { + check_first = 0; + if (VSTRING_LEN(buf) > 0 && IS_SPACE_TAB(vstring_str(buf)[0])) + rec_put(cleanup, REC_TYPE_NORM, "", 0); + } + if ((REC_PUT_BUF(cleanup, type, buf)) < 0) + return (cleanup_service_error(info, CLEANUP_STAT_WRITE)); + } + return (0); +} + +/* pickup_copy - copy message to cleanup service */ + +static int pickup_copy(VSTREAM *qfile, VSTREAM *cleanup, + PICKUP_INFO *info, VSTRING *buf) +{ + time_t now = time((time_t *) 0); + int status; + char *name; + + /* + * Protect against time-warped time stamps. Warn about mail that has been + * queued for an excessive amount of time. Allow for some time drift with + * network clients that mount the maildrop remotely - especially clients + * that can't get their daylight savings offsets right. + */ +#define DAY_SECONDS 86400 +#define HOUR_SECONDS 3600 + + if (info->st.st_mtime > now + 2 * HOUR_SECONDS) { + msg_warn("%s: message dated %ld seconds into the future", + info->id, (long) (info->st.st_mtime - now)); + info->st.st_mtime = now; + } else if (info->st.st_mtime < now - DAY_SECONDS) { + msg_warn("%s: message has been queued for %d days", + info->id, (int) ((now - info->st.st_mtime) / DAY_SECONDS)); + } + + /* + * Add content inspection transport. See also postsuper(1). + */ + if (*var_filter_xport) + rec_fprintf(cleanup, REC_TYPE_FILT, "%s", var_filter_xport); + + /* + * Copy the message envelope segment. Allow only those records that we + * expect to see in the envelope section. The envelope segment must + * contain an envelope sender address. + */ + if ((status = copy_segment(qfile, cleanup, info, buf, REC_TYPE_ENVELOPE)) != 0) + return (status); + if (info->sender == 0) { + msg_warn("%s: uid=%ld: no envelope sender", + info->id, (long) info->st.st_uid); + return (REMOVE_MESSAGE_FILE); + } + + /* + * For messages belonging to $mail_owner also log the maildrop queue id. + * This supports message tracking for mail requeued via "postsuper -r". + */ +#define MAIL_IS_REQUEUED(info) \ + ((info)->st.st_uid == var_owner_uid && ((info)->st.st_mode & S_IROTH) == 0) + + if (MAIL_IS_REQUEUED(info)) { + msg_info("%s: uid=%d from=<%s> orig_id=%s", info->id, + (int) info->st.st_uid, info->sender, + ((name = strrchr(info->path, '/')) != 0 ? + name + 1 : info->path)); + } else { + msg_info("%s: uid=%d from=<%s>", info->id, + (int) info->st.st_uid, info->sender); + } + + /* + * Message content segment. Send a dummy message length. Prepend a + * Received: header to the message contents. For tracing purposes, + * include the message file ownership, without revealing the login name. + */ + rec_fputs(cleanup, REC_TYPE_MESG, ""); + rec_fprintf(cleanup, REC_TYPE_NORM, "Received: by %s (%s, from userid %ld)", + var_myhostname, var_mail_name, (long) info->st.st_uid); + rec_fprintf(cleanup, REC_TYPE_NORM, "\tid %s; %s", info->id, + mail_date(info->st.st_mtime)); + + /* + * Copy the message content segment. Allow only those records that we + * expect to see in the message content section. + */ + if ((status = copy_segment(qfile, cleanup, info, buf, REC_TYPE_CONTENT)) != 0) + return (status); + + /* + * Send the segment with information extracted from message headers. + * Permit a non-empty extracted segment, so that list manager software + * can to output recipients after the message, and so that sysadmins can + * re-inject messages after a change of configuration. + */ + rec_fputs(cleanup, REC_TYPE_XTRA, ""); + if ((status = copy_segment(qfile, cleanup, info, buf, REC_TYPE_EXTRACT)) != 0) + return (status); + + /* + * There are no errors. Send the end-of-data marker, and get the cleanup + * service completion status. XXX Since the pickup service is unable to + * bounce, the cleanup service can report only soft errors here. + */ + rec_fputs(cleanup, REC_TYPE_END, ""); + if (attr_scan(cleanup, ATTR_FLAG_MISSING, + RECV_ATTR_INT(MAIL_ATTR_STATUS, &status), + RECV_ATTR_STR(MAIL_ATTR_WHY, buf), + ATTR_TYPE_END) != 2) + return (cleanup_service_error(info, CLEANUP_STAT_WRITE)); + + /* + * Depending on the cleanup service completion status, delete the message + * file, or try again later. Bounces are dealt with by the cleanup + * service itself. The master process wakes up the cleanup service every + * now and then. + */ + if (status) { + return (cleanup_service_error_reason(info, status, vstring_str(buf))); + } else { + return (REMOVE_MESSAGE_FILE); + } +} + +/* pickup_file - initialize for file copy and cleanup */ + +static int pickup_file(PICKUP_INFO *info) +{ + VSTRING *buf = vstring_alloc(100); + int status; + VSTREAM *qfile; + VSTREAM *cleanup; + int cleanup_flags; + + /* + * Open the submitted file. If we cannot open it, and we're not having a + * file descriptor leak problem, delete the submitted file, so that we + * won't keep complaining about the same file again and again. XXX + * Perhaps we should save "bad" files elsewhere for further inspection. + * XXX How can we delete a file when open() fails with ENOENT? + */ + qfile = safe_open(info->path, O_RDONLY | O_NONBLOCK, 0, + (struct stat *) 0, -1, -1, buf); + if (qfile == 0) { + if (errno != ENOENT) + msg_warn("open input file %s: %s", info->path, vstring_str(buf)); + vstring_free(buf); + if (errno == EACCES) + msg_warn("if this file was created by Postfix < 1.1, then you may have to chmod a+r %s/%s", + var_queue_dir, info->path); + return (errno == EACCES ? KEEP_MESSAGE_FILE : REMOVE_MESSAGE_FILE); + } + + /* + * Contact the cleanup service and read the queue ID that it has + * allocated. In case of trouble, request that the cleanup service + * bounces its copy of the message. because the original input file is + * not readable by the bounce service. + * + * If mail is re-injected with "postsuper -r", disable Milter applications. + * If they were run before the mail was queued then there is no need to + * run them again. Moreover, the queue file does not contain enough + * information to reproduce the exact same SMTP events and Sendmail + * macros that Milters received when the mail originally arrived in + * Postfix. + * + * The actual message copying code is in a separate routine, so that it is + * easier to implement the many possible error exits without forgetting + * to close files, or to release memory. + */ + cleanup_flags = + input_transp_cleanup(CLEANUP_FLAG_BOUNCE | CLEANUP_FLAG_MASK_EXTERNAL, + pickup_input_transp_mask); + /* As documented in postsuper(1). */ + if (MAIL_IS_REQUEUED(info)) + cleanup_flags &= ~CLEANUP_FLAG_MILTER; + else + cleanup_flags |= smtputf8_autodetect(MAIL_SRC_MASK_SENDMAIL); + + cleanup = mail_connect_wait(MAIL_CLASS_PUBLIC, var_cleanup_service); + if (attr_scan(cleanup, ATTR_FLAG_STRICT, + RECV_ATTR_STR(MAIL_ATTR_QUEUEID, buf), + ATTR_TYPE_END) != 1 + || attr_print(cleanup, ATTR_FLAG_NONE, + SEND_ATTR_INT(MAIL_ATTR_FLAGS, cleanup_flags), + ATTR_TYPE_END) != 0) { + status = KEEP_MESSAGE_FILE; + } else { + info->id = mystrdup(vstring_str(buf)); + status = pickup_copy(qfile, cleanup, info, buf); + } + vstream_fclose(qfile); + vstream_fclose(cleanup); + vstring_free(buf); + return (status); +} + +/* pickup_init - init info structure */ + +static void pickup_init(PICKUP_INFO *info) +{ + info->id = 0; + info->path = 0; + info->sender = 0; +} + +/* pickup_free - wipe info structure */ + +static void pickup_free(PICKUP_INFO *info) +{ +#define SAFE_FREE(x) { if (x) myfree(x); } + + SAFE_FREE(info->id); + SAFE_FREE(info->path); + SAFE_FREE(info->sender); +} + +/* pickup_service - service client */ + +static void pickup_service(char *unused_buf, ssize_t unused_len, + char *unused_service, char **argv) +{ + SCAN_DIR *scan; + char *queue_name; + PICKUP_INFO info; + const char *path; + char *id; + int file_count; + + /* + * Sanity check. This service takes no command-line arguments. + */ + if (argv[0]) + msg_fatal("unexpected command-line argument: %s", argv[0]); + + /* + * Skip over things that we don't want to open, such as files that are + * still being written, or garbage. Leave it up to the sysadmin to remove + * garbage. Keep scanning the queue directory until we stop removing + * files from it. + * + * When we find a file, stroke the watchdog so that it will not bark while + * some application is keeping us busy by injecting lots of mail into the + * maildrop directory. + */ + queue_name = MAIL_QUEUE_MAILDROP; /* XXX should be a list */ + do { + file_count = 0; + scan = scan_dir_open(queue_name); + while ((id = scan_dir_next(scan)) != 0) { + if (mail_open_ok(queue_name, id, &info.st, &path) == MAIL_OPEN_YES) { + pickup_init(&info); + info.path = mystrdup(path); + watchdog_pat(); + if (pickup_file(&info) == REMOVE_MESSAGE_FILE) { + if (REMOVE(info.path)) + msg_warn("remove %s: %m", info.path); + else + file_count++; + } + pickup_free(&info); + } + } + scan_dir_close(scan); + } while (file_count); +} + +/* post_jail_init - drop privileges */ + +static void post_jail_init(char *unused_name, char **unused_argv) +{ + + /* + * In case master.cf was not updated for unprivileged service. + */ + if (getuid() != var_owner_uid) + set_ugid(var_owner_uid, var_owner_gid); + + /* + * Initialize the receive transparency options: do we want unknown + * recipient checks, do we want address mapping. + */ + pickup_input_transp_mask = + input_transp_mask(VAR_INPUT_TRANSP, var_input_transp); +} + +MAIL_VERSION_STAMP_DECLARE; + +/* main - pass control to the multi-threaded server skeleton */ + +int main(int argc, char **argv) +{ + static const CONFIG_STR_TABLE str_table[] = { + VAR_FILTER_XPORT, DEF_FILTER_XPORT, &var_filter_xport, 0, 0, + VAR_INPUT_TRANSP, DEF_INPUT_TRANSP, &var_input_transp, 0, 0, + 0, + }; + + /* + * Fingerprint executables and core dumps. + */ + MAIL_VERSION_STAMP_ALLOCATE; + + /* + * Use the multi-threaded skeleton, because no-one else should be + * monitoring our service socket while this process runs. + * + * XXX The default watchdog timeout for trigger servers is 1000s, while the + * cleanup server watchdog timeout is $daemon_timeout (i.e. several + * hours). We override the default 1000s timeout to avoid problems with + * slow mail submission. The real problem is of course that the + * single-threaded pickup server is not a good solution for mail + * submissions. + */ + trigger_server_main(argc, argv, pickup_service, + CA_MAIL_SERVER_STR_TABLE(str_table), + CA_MAIL_SERVER_POST_INIT(post_jail_init), + CA_MAIL_SERVER_SOLITARY, + CA_MAIL_SERVER_WATCHDOG(&var_daemon_timeout), + 0); +} |