From b5896ba9f6047e7031e2bdee0622d543e11a6734 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:46:30 +0200 Subject: Adding upstream version 3.4.23. Signed-off-by: Daniel Baumann --- examples/smtpd-policy/README.SPF | 6 + examples/smtpd-policy/greylist.pl | 283 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 289 insertions(+) create mode 100644 examples/smtpd-policy/README.SPF create mode 100755 examples/smtpd-policy/greylist.pl (limited to 'examples/smtpd-policy') diff --git a/examples/smtpd-policy/README.SPF b/examples/smtpd-policy/README.SPF new file mode 100644 index 0000000..2590a1d --- /dev/null +++ b/examples/smtpd-policy/README.SPF @@ -0,0 +1,6 @@ +See http://www.openspf.org/Software for the current version of the +SPF policy daemon for Postfix. + +SPF support is also available via MILTER plugins, such as sid-milter +at http://sourceforge.net/projects/sid-milter/ which implements both +SenderID and SPF. diff --git a/examples/smtpd-policy/greylist.pl b/examples/smtpd-policy/greylist.pl new file mode 100755 index 0000000..dbaa5cb --- /dev/null +++ b/examples/smtpd-policy/greylist.pl @@ -0,0 +1,283 @@ +#!/usr/bin/perl + +use DB_File; +use Fcntl; +use Sys::Syslog qw(:DEFAULT setlogsock); + +# +# Usage: greylist.pl [-v] +# +# Demo delegated Postfix SMTPD policy server. This server implements +# greylisting. State is kept in a Berkeley DB database. Logging is +# sent to syslogd. +# +# How it works: each time a Postfix SMTP server process is started +# it connects to the policy service socket, and Postfix runs one +# instance of this PERL script. By default, a Postfix SMTP server +# process terminates after 100 seconds of idle time, or after serving +# 100 clients. Thus, the cost of starting this PERL script is smoothed +# out over time. +# +# To run this from /etc/postfix/master.cf: +# +# policy unix - n n - - spawn +# user=nobody argv=/usr/bin/perl /usr/libexec/postfix/greylist.pl +# +# To use this from Postfix SMTPD, use in /etc/postfix/main.cf: +# +# smtpd_recipient_restrictions = +# ... +# reject_unauth_destination +# check_policy_service unix:private/policy +# ... +# +# NOTE: specify check_policy_service AFTER reject_unauth_destination +# or else your system can become an open relay. +# +# To test this script by hand, execute: +# +# % perl greylist.pl +# +# Each query is a bunch of attributes. Order does not matter, and +# the demo script uses only a few of all the attributes shown below: +# +# request=smtpd_access_policy +# protocol_state=RCPT +# protocol_name=SMTP +# helo_name=some.domain.tld +# queue_id=8045F2AB23 +# sender=foo@bar.tld +# recipient=bar@foo.tld +# client_address=1.2.3.4 +# client_name=another.domain.tld +# instance=123.456.7 +# sasl_method=plain +# sasl_username=you +# sasl_sender= +# size=12345 +# [empty line] +# +# The policy server script will answer in the same style, with an +# attribute list followed by a empty line: +# +# action=dunno +# [empty line] +# + +# +# greylist status database and greylist time interval. DO NOT create the +# greylist status database in a world-writable directory such as /tmp +# or /var/tmp. DO NOT create the greylist database in a file system +# that can run out of space. +# +# In case of database corruption, this script saves the database as +# $database_name.time(), so that the mail system does not get stuck. +# +$database_name="/var/mta/greylist.db"; +$greylist_delay=60; + +# +# Auto-whitelist threshold. Specify 0 to disable, or the number of +# successful "come backs" after which a client is no longer subject +# to greylisting. +# +$auto_whitelist_threshold = 10; + +# +# Syslogging options for verbose mode and for fatal errors. +# NOTE: comment out the $syslog_socktype line if syslogging does not +# work on your system. +# +$syslog_socktype = 'unix'; # inet, unix, stream, console +$syslog_facility="mail"; +$syslog_options="pid"; +$syslog_priority="info"; + +# +# Demo SMTPD access policy routine. The result is an action just like +# it would be specified on the right-hand side of a Postfix access +# table. Request attributes are available via the %attr hash. +# +sub smtpd_access_policy { + my($key, $time_stamp, $now, $count); + + # Open the database on the fly. + open_database() unless $database_obj; + + # Search the auto-whitelist. + if ($auto_whitelist_threshold > 0) { + $count = read_database($attr{"client_address"}); + if ($count > $auto_whitelist_threshold) { + return "dunno"; + } + } + + # Lookup the time stamp for this client/sender/recipient. + $key = + lc $attr{"client_address"}."/".$attr{"sender"}."/".$attr{"recipient"}; + $time_stamp = read_database($key); + $now = time(); + + # If this is a new request add this client/sender/recipient to the database. + if ($time_stamp == 0) { + $time_stamp = $now; + update_database($key, $time_stamp); + } + + # The result can be any action that is allowed in a Postfix access(5) map. + # + # To label mail, return ``PREPEND'' headername: headertext + # + # In case of success, return ``DUNNO'' instead of ``OK'' so that the + # check_policy_service restriction can be followed by other restrictions. + # + # In case of failure, specify ``DEFER_IF_PERMIT optional text...'' + # so that mail can still be blocked by other access restrictions. + # + syslog $syslog_priority, "request age %d", $now - $time_stamp if $verbose; + if ($now - $time_stamp > $greylist_delay) { + # Update the auto-whitelist. + if ($auto_whitelist_threshold > 0) { + update_database($attr{"client_address"}, $count + 1); + } + return "dunno"; + } else { + return "defer_if_permit Service is unavailable"; + } +} + +# +# You should not have to make changes below this point. +# +sub LOCK_SH { 1 }; # Shared lock (used for reading). +sub LOCK_EX { 2 }; # Exclusive lock (used for writing). +sub LOCK_NB { 4 }; # Don't block (for testing). +sub LOCK_UN { 8 }; # Release lock. + +# +# Log an error and abort. +# +sub fatal_exit { + my($first) = shift(@_); + syslog "err", "fatal: $first", @_; + exit 1; +} + +# +# Open hash database. +# +sub open_database { + my($database_fd); + + # Use tied database to make complex manipulations easier to express. + $database_obj = tie(%db_hash, 'DB_File', $database_name, + O_CREAT|O_RDWR, 0644, $DB_BTREE) || + fatal_exit "Cannot open database %s: $!", $database_name; + $database_fd = $database_obj->fd; + open DATABASE_HANDLE, "+<&=$database_fd" || + fatal_exit "Cannot fdopen database %s: $!", $database_name; + syslog $syslog_priority, "open %s", $database_name if $verbose; +} + +# +# Read database. Use a shared lock to avoid reading the database +# while it is being changed. XXX There should be a way to synchronize +# our cache from the on-file database before looking up the key. +# +sub read_database { + my($key) = @_; + my($value); + + flock DATABASE_HANDLE, LOCK_SH || + fatal_exit "Can't get shared lock on %s: $!", $database_name; + # XXX Synchronize our cache from the on-disk copy before lookup. + $value = $db_hash{$key}; + syslog $syslog_priority, "lookup %s: %s", $key, $value if $verbose; + flock DATABASE_HANDLE, LOCK_UN || + fatal_exit "Can't unlock %s: $!", $database_name; + return $value; +} + +# +# Update database. Use an exclusive lock to avoid collisions with +# other updaters, and to avoid surprises in database readers. XXX +# There should be a way to synchronize our cache from the on-file +# database before updating the database. +# +sub update_database { + my($key, $value) = @_; + + syslog $syslog_priority, "store %s: %s", $key, $value if $verbose; + flock DATABASE_HANDLE, LOCK_EX || + fatal_exit "Can't exclusively lock %s: $!", $database_name; + # XXX Synchronize our cache from the on-disk copy before update. + $db_hash{$key} = $value; + $database_obj->sync() && + fatal_exit "Can't update %s: $!", $database_name; + flock DATABASE_HANDLE, LOCK_UN || + fatal_exit "Can't unlock %s: $!", $database_name; +} + +# +# Signal 11 means that we have some kind of database corruption (yes +# Berkeley DB should handle this better). Move the corrupted database +# out of the way, and start with a new database. +# +sub sigsegv_handler { + my $backup = $database_name . "." . time(); + + rename $database_name, $backup || + fatal_exit "Can't save %s as %s: $!", $database_name, $backup; + fatal_exit "Caught signal 11; the corrupted database is saved as $backup"; +} + +$SIG{'SEGV'} = 'sigsegv_handler'; + +# +# This process runs as a daemon, so it can't log to a terminal. Use +# syslog so that people can actually see our messages. +# +setlogsock $syslog_socktype; +openlog $0, $syslog_options, $syslog_facility; + +# +# We don't need getopt() for now. +# +while ($option = shift(@ARGV)) { + if ($option eq "-v") { + $verbose = 1; + } else { + syslog $syslog_priority, "Invalid option: %s. Usage: %s [-v]", + $option, $0; + exit 1; + } +} + +# +# Unbuffer standard output. +# +select((select(STDOUT), $| = 1)[0]); + +# +# Receive a bunch of attributes, evaluate the policy, send the result. +# +while () { + if (/([^=]+)=(.*)\n/) { + $attr{substr($1, 0, 512)} = substr($2, 0, 512); + } elsif ($_ eq "\n") { + if ($verbose) { + for (keys %attr) { + syslog $syslog_priority, "Attribute: %s=%s", $_, $attr{$_}; + } + } + fatal_exit "unrecognized request type: '%s'", $attr{request} + unless $attr{"request"} eq "smtpd_access_policy"; + $action = smtpd_access_policy(); + syslog $syslog_priority, "Action: %s", $action if $verbose; + print STDOUT "action=$action\n\n"; + %attr = (); + } else { + chop; + syslog $syslog_priority, "warning: ignoring garbage: %.100s", $_; + } +} -- cgit v1.2.3