From 1cab6bf479478b2f5816e5bde4f5542dea45f15a Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 04:18:09 +0200 Subject: Adding upstream version 7.0. Signed-off-by: Daniel Baumann --- doc/texinfo.tex | 11045 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 11045 insertions(+) create mode 100644 doc/texinfo.tex (limited to 'doc/texinfo.tex') diff --git a/doc/texinfo.tex b/doc/texinfo.tex new file mode 100644 index 0000000..d494cce --- /dev/null +++ b/doc/texinfo.tex @@ -0,0 +1,11045 @@ +% texinfo.tex -- TeX macros to handle Texinfo files. +% +% Load plain if necessary, i.e., if running under initex. +\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi +% +\def\texinfoversion{2015-11-22.14} +% +% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, +% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 +% Free Software Foundation, Inc. +% +% This texinfo.tex file is free software: you can redistribute it and/or +% modify it under the terms of the GNU General Public License as +% published by the Free Software Foundation, either version 3 of the +% License, or (at your option) any later version. +% +% This texinfo.tex file is distributed in the hope that it will be +% useful, but WITHOUT ANY WARRANTY; without even the implied warranty +% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +% General Public License for more details. +% +% You should have received a copy of the GNU General Public License +% along with this program. If not, see . +% +% As a special exception, when this file is read by TeX when processing +% a Texinfo source document, you may use the result without +% restriction. This Exception is an additional permission under section 7 +% of the GNU General Public License, version 3 ("GPLv3"). +% +% Please try the latest version of texinfo.tex before submitting bug +% reports; you can get the latest version from: +% http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or +% http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or +% http://www.gnu.org/software/texinfo/ (the Texinfo home page) +% The texinfo.tex in any given distribution could well be out +% of date, so if that's what you're using, please check. +% +% Send bug reports to bug-texinfo@gnu.org. Please include including a +% complete document in each bug report with which we can reproduce the +% problem. Patches are, of course, greatly appreciated. +% +% To process a Texinfo manual with TeX, it's most reliable to use the +% texi2dvi shell script that comes with the distribution. For a simple +% manual foo.texi, however, you can get away with this: +% tex foo.texi +% texindex foo.?? +% tex foo.texi +% tex foo.texi +% dvips foo.dvi -o # or whatever; this makes foo.ps. +% The extra TeX runs get the cross-reference information correct. +% Sometimes one run after texindex suffices, and sometimes you need more +% than two; texi2dvi does it as many times as necessary. +% +% It is possible to adapt texinfo.tex for other languages, to some +% extent. You can get the existing language-specific files from the +% full Texinfo distribution. +% +% The GNU Texinfo home page is http://www.gnu.org/software/texinfo. + + +\message{Loading texinfo [version \texinfoversion]:} + +% If in a .fmt file, print the version number +% and turn on active characters that we couldn't do earlier because +% they might have appeared in the input file name. +\everyjob{\message{[Texinfo version \texinfoversion]}% + \catcode`+=\active \catcode`\_=\active} + +\chardef\other=12 + +% We never want plain's \outer definition of \+ in Texinfo. +% For @tex, we can use \tabalign. +\let\+ = \relax + +% Save some plain tex macros whose names we will redefine. +\let\ptexb=\b +\let\ptexbullet=\bullet +\let\ptexc=\c +\let\ptexcomma=\, +\let\ptexdot=\. +\let\ptexdots=\dots +\let\ptexend=\end +\let\ptexequiv=\equiv +\let\ptexexclam=\! +\let\ptexfootnote=\footnote +\let\ptexgtr=> +\let\ptexhat=^ +\let\ptexi=\i +\let\ptexindent=\indent +\let\ptexinsert=\insert +\let\ptexlbrace=\{ +\let\ptexless=< +\let\ptexnewwrite\newwrite +\let\ptexnoindent=\noindent +\let\ptexplus=+ +\let\ptexraggedright=\raggedright +\let\ptexrbrace=\} +\let\ptexslash=\/ +\let\ptexsp=\sp +\let\ptexstar=\* +\let\ptexsup=\sup +\let\ptext=\t +\let\ptextop=\top +{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode + +% If this character appears in an error message or help string, it +% starts a new line in the output. +\newlinechar = `^^J + +% Use TeX 3.0's \inputlineno to get the line number, for better error +% messages, but if we're using an old version of TeX, don't do anything. +% +\ifx\inputlineno\thisisundefined + \let\linenumber = \empty % Pre-3.0. +\else + \def\linenumber{l.\the\inputlineno:\space} +\fi + +% Set up fixed words for English if not already set. +\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi +\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi +\ifx\putworderror\undefined \gdef\putworderror{error}\fi +\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi +\ifx\putwordin\undefined \gdef\putwordin{in}\fi +\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi +\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi +\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi +\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi +\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi +\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi +\ifx\putwordof\undefined \gdef\putwordof{of}\fi +\ifx\putwordon\undefined \gdef\putwordon{on}\fi +\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi +\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi +\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi +\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi +\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi +\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi +\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi +% +\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi +\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi +\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi +\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi +\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi +\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi +\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi +\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi +\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi +\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi +\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi +\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi +% +\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi +\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi +\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi +\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi + +% Since the category of space is not known, we have to be careful. +\chardef\spacecat = 10 +\def\spaceisspace{\catcode`\ =\spacecat} + +% sometimes characters are active, so we need control sequences. +\chardef\ampChar = `\& +\chardef\colonChar = `\: +\chardef\commaChar = `\, +\chardef\dashChar = `\- +\chardef\dotChar = `\. +\chardef\exclamChar= `\! +\chardef\hashChar = `\# +\chardef\lquoteChar= `\` +\chardef\questChar = `\? +\chardef\rquoteChar= `\' +\chardef\semiChar = `\; +\chardef\slashChar = `\/ +\chardef\underChar = `\_ + +% Ignore a token. +% +\def\gobble#1{} + +% The following is used inside several \edef's. +\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} + +% Hyphenation fixes. +\hyphenation{ + Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script + ap-pen-dix bit-map bit-maps + data-base data-bases eshell fall-ing half-way long-est man-u-script + man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm + par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces + spell-ing spell-ings + stand-alone strong-est time-stamp time-stamps which-ever white-space + wide-spread wrap-around +} + +% Sometimes it is convenient to have everything in the transcript file +% and nothing on the terminal. We don't just call \tracingall here, +% since that produces some useless output on the terminal. We also make +% some effort to order the tracing commands to reduce output in the log +% file; cf. trace.sty in LaTeX. +% +\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% +\def\loggingall{% + \tracingstats2 + \tracingpages1 + \tracinglostchars2 % 2 gives us more in etex + \tracingparagraphs1 + \tracingoutput1 + \tracingmacros2 + \tracingrestores1 + \showboxbreadth\maxdimen \showboxdepth\maxdimen + \ifx\eTeXversion\thisisundefined\else % etex gives us more logging + \tracingscantokens1 + \tracingifs1 + \tracinggroups1 + \tracingnesting2 + \tracingassigns1 + \fi + \tracingcommands3 % 3 gives us more in etex + \errorcontextlines16 +}% + +% @errormsg{MSG}. Do the index-like expansions on MSG, but if things +% aren't perfect, it's not the end of the world, being an error message, +% after all. +% +\def\errormsg{\begingroup \indexnofonts \doerrormsg} +\def\doerrormsg#1{\errmessage{#1}} + +% add check for \lastpenalty to plain's definitions. If the last thing +% we did was a \nobreak, we don't want to insert more space. +% +\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount + \removelastskip\penalty-50\smallskip\fi\fi} +\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount + \removelastskip\penalty-100\medskip\fi\fi} +\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount + \removelastskip\penalty-200\bigskip\fi\fi} + +% Output routine +% + +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). +% +\def\finalout{\overfullrule=0pt } + +% Do @cropmarks to get crop marks. +% +\newif\ifcropmarks +\let\cropmarks = \cropmarkstrue +% +% Dimensions to add cropmarks at corners. +% Added by P. A. MacKay, 12 Nov. 1986 +% +\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines +\newdimen\cornerlong \cornerlong=1pc +\newdimen\cornerthick \cornerthick=.3pt +\newdimen\topandbottommargin \topandbottommargin=.75in + +% Output a mark which sets \thischapter, \thissection and \thiscolor. +% We dump everything together because we only have one kind of mark. +% This works because we only use \botmark / \topmark, not \firstmark. +% +% A mark contains a subexpression of the \ifcase ... \fi construct. +% \get*marks macros below extract the needed part using \ifcase. +% +% Another complication is to let the user choose whether \thischapter +% (\thissection) refers to the chapter (section) in effect at the top +% of a page, or that at the bottom of a page. The solution is +% described on page 260 of The TeXbook. It involves outputting two +% marks for the sectioning macros, one before the section break, and +% one after. I won't pretend I can describe this better than DEK... +% +\def\domark{% + \toks0=\expandafter{\lastchapterdefs}% + \toks2=\expandafter{\lastsectiondefs}% + \toks4=\expandafter{\prevchapterdefs}% + \toks6=\expandafter{\prevsectiondefs}% + \toks8=\expandafter{\lastcolordefs}% + \mark{% + \the\toks0 \the\toks2 % 0: top marks (\last...) + \noexpand\or \the\toks4 \the\toks6 % 1: bottom marks (default, \prev...) + \noexpand\else \the\toks8 % 2: color marks + }% +} + +% \gettopheadingmarks, \getbottomheadingmarks - extract needed part of mark. +% +% \topmark doesn't work for the very first chapter (after the title +% page or the contents), so we use \firstmark there -- this gets us +% the mark with the chapter defs, unless the user sneaks in, e.g., +% @setcolor (or @url, or @link, etc.) between @contents and the very +% first @chapter. +\def\gettopheadingmarks{% + \ifcase0\topmark\fi + \ifx\thischapter\empty \ifcase0\firstmark\fi \fi +} +\def\getbottomheadingmarks{\ifcase1\botmark\fi} +\def\getcolormarks{\ifcase2\topmark\fi} + +% Avoid "undefined control sequence" errors. +\def\lastchapterdefs{} +\def\lastsectiondefs{} +\def\lastsection{} +\def\prevchapterdefs{} +\def\prevsectiondefs{} +\def\lastcolordefs{} + +% Margin to add to right of even pages, to left of odd pages. +\newdimen\bindingoffset +\newdimen\normaloffset +\newdimen\pagewidth \newdimen\pageheight + +% Main output routine. +% +\chardef\PAGE = 255 +\output = {\onepageout{\pagecontents\PAGE}} + +\newbox\headlinebox +\newbox\footlinebox + +% \onepageout takes a vbox as an argument. +% \shipout a vbox for a single page, adding an optional header, footer, +% cropmarks, and footnote. This also causes index entries for this page +% to be written to the auxiliary files. +% +\def\onepageout#1{% + \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi + % + \ifodd\pageno \advance\hoffset by \bindingoffset + \else \advance\hoffset by -\bindingoffset\fi + % + % Common context changes for both heading and footing. + % Do this outside of the \shipout so @code etc. will be expanded in + % the headline as they should be, not taken literally (outputting ''code). + \def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars} + % + % Retrieve the information for the headings from the marks in the page, + % and call Plain TeX's \makeheadline and \makefootline, which use the + % values in \headline and \footline. + % + % This is used to check if we are on the first page of a chapter. + \ifcase0\topmark\fi + \ifx\thischapter\empty + % See comment for \gettopheadingmarks + \ifcase0\firstmark\fi + \let\curchaptername\thischaptername + \ifcase1\firstmark\fi + \let\prevchaptername\thischaptername + \else + \let\curchaptername\thischaptername + \ifcase1\topmark\fi + \let\prevchaptername\thischaptername + \fi + % + \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi + \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi + % + \ifx\curchaptername\prevchaptername + \let\thischapterheading\thischapter + \else + % \thischapterheading is the same as \thischapter except it is blank + % for the first page of a chapter. This is to prevent the chapter name + % being shown twice. + \def\thischapterheading{}% + \fi + % + \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}% + \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}% + % + {% + % Set context for writing to auxiliary files like index files. + % Have to do this stuff outside the \shipout because we want it to + % take effect in \write's, yet the group defined by the \vbox ends + % before the \shipout runs. + % + \indexdummies % don't expand commands in the output. + \normalturnoffactive % \ in index entries must not stay \, e.g., if + % the page break happens to be in the middle of an example. + % We don't want .vr (or whatever) entries like this: + % \entry{{\indexbackslash }acronym}{32}{\code {\acronym}} + % "\acronym" won't work when it's read back in; + % it needs to be + % {\code {{\backslashcurfont }acronym} + \shipout\vbox{% + % Do this early so pdf references go to the beginning of the page. + \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi + % + \ifcropmarks \vbox to \outervsize\bgroup + \hsize = \outerhsize + \vskip-\topandbottommargin + \vtop to0pt{% + \line{\ewtop\hfil\ewtop}% + \nointerlineskip + \line{% + \vbox{\moveleft\cornerthick\nstop}% + \hfill + \vbox{\moveright\cornerthick\nstop}% + }% + \vss}% + \vskip\topandbottommargin + \line\bgroup + \hfil % center the page within the outer (page) hsize. + \ifodd\pageno\hskip\bindingoffset\fi + \vbox\bgroup + \fi + % + \unvbox\headlinebox + \pagebody{#1}% + \ifdim\ht\footlinebox > 0pt + % Only leave this space if the footline is nonempty. + % (We lessened \vsize for it in \oddfootingyyy.) + % The \baselineskip=24pt in plain's \makefootline has no effect. + \vskip 24pt + \unvbox\footlinebox + \fi + % + \ifcropmarks + \egroup % end of \vbox\bgroup + \hfil\egroup % end of (centering) \line\bgroup + \vskip\topandbottommargin plus1fill minus1fill + \boxmaxdepth = \cornerthick + \vbox to0pt{\vss + \line{% + \vbox{\moveleft\cornerthick\nsbot}% + \hfill + \vbox{\moveright\cornerthick\nsbot}% + }% + \nointerlineskip + \line{\ewbot\hfil\ewbot}% + }% + \egroup % \vbox from first cropmarks clause + \fi + }% end of \shipout\vbox + }% end of group with \indexdummies + \advancepageno + \ifnum\outputpenalty>-20000 \else\dosupereject\fi +} + +\newinsert\margin \dimen\margin=\maxdimen + +% Main part of page, including any footnotes +\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} +{\catcode`\@ =11 +\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi +% marginal hacks, juha@viisa.uucp (Juha Takala) +\ifvoid\margin\else % marginal info is present + \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi +\dimen@=\dp#1\relax \unvbox#1\relax +\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi +\ifr@ggedbottom \kern-\dimen@ \vfil \fi} +} + +% Here are the rules for the cropmarks. Note that they are +% offset so that the space between them is truly \outerhsize or \outervsize +% (P. A. MacKay, 12 November, 1986) +% +\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} +\def\nstop{\vbox + {\hrule height\cornerthick depth\cornerlong width\cornerthick}} +\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} +\def\nsbot{\vbox + {\hrule height\cornerlong depth\cornerthick width\cornerthick}} + + +% Argument parsing + +% Parse an argument, then pass it to #1. The argument is the rest of +% the input line (except we remove a trailing comment). #1 should be a +% macro which expects an ordinary undelimited TeX argument. +% For example, \def\foo{\parsearg\fooxxx}. +% +\def\parsearg{\parseargusing{}} +\def\parseargusing#1#2{% + \def\argtorun{#2}% + \begingroup + \obeylines + \spaceisspace + #1% + \parseargline\empty% Insert the \empty token, see \finishparsearg below. +} + +{\obeylines % + \gdef\parseargline#1^^M{% + \endgroup % End of the group started in \parsearg. + \argremovecomment #1\comment\ArgTerm% + }% +} + +% First remove any @comment, then any @c comment. Also remove a @texinfoc +% comment (see \scanmacro for details). Pass the result on to \argcheckspaces. +\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} +\def\argremovec#1\c#2\ArgTerm{\argremovetexinfoc #1\texinfoc\ArgTerm} +\def\argremovetexinfoc#1\texinfoc#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} + +% Each occurrence of `\^^M' or `\^^M' is replaced by a single space. +% +% \argremovec might leave us with trailing space, e.g., +% @end itemize @c foo +% This space token undergoes the same procedure and is eventually removed +% by \finishparsearg. +% +\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} +\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} +\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% + \def\temp{#3}% + \ifx\temp\empty + % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp: + \let\temp\finishparsearg + \else + \let\temp\argcheckspaces + \fi + % Put the space token in: + \temp#1 #3\ArgTerm +} + +% If a _delimited_ argument is enclosed in braces, they get stripped; so +% to get _exactly_ the rest of the line, we had to prevent such situation. +% We prepended an \empty token at the very beginning and we expand it now, +% just before passing the control to \argtorun. +% (Similarly, we have to think about #3 of \argcheckspacesY above: it is +% either the null string, or it ends with \^^M---thus there is no danger +% that a pair of braces would be stripped. +% +% But first, we have to remove the trailing space token. +% +\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}} + + +% \parseargdef - define a command taking an argument on the line +% +% \parseargdef\foo{...} +% is roughly equivalent to +% \def\foo{\parsearg\Xfoo} +% \def\Xfoo#1{...} +\def\parseargdef#1{% + \expandafter \doparseargdef \csname\string#1\endcsname #1% +} +\def\doparseargdef#1#2{% + \def#2{\parsearg#1}% + \def#1##1% +} + +% Several utility definitions with active space: +{ + \obeyspaces + \gdef\obeyedspace{ } + + % Make each space character in the input produce a normal interword + % space in the output. Don't allow a line break at this space, as this + % is used only in environments like @example, where each line of input + % should produce a line of output anyway. + % + \gdef\sepspaces{\obeyspaces\let =\tie} + + % If an index command is used in an @example environment, any spaces + % therein should become regular spaces in the raw index file, not the + % expansion of \tie (\leavevmode \penalty \@M \ ). + \gdef\unsepspaces{\let =\space} +} + + +\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} + +% Define the framework for environments in texinfo.tex. It's used like this: +% +% \envdef\foo{...} +% \def\Efoo{...} +% +% It's the responsibility of \envdef to insert \begingroup before the +% actual body; @end closes the group after calling \Efoo. \envdef also +% defines \thisenv, so the current environment is known; @end checks +% whether the environment name matches. The \checkenv macro can also be +% used to check whether the current environment is the one expected. +% +% Non-false conditionals (@iftex, @ifset) don't fit into this, so they +% are not treated as environments; they don't open a group. (The +% implementation of @end takes care not to call \endgroup in this +% special case.) + + +% At run-time, environments start with this: +\def\startenvironment#1{\begingroup\def\thisenv{#1}} +% initialize +\let\thisenv\empty + +% ... but they get defined via ``\envdef\foo{...}'': +\long\def\envdef#1#2{\def#1{\startenvironment#1#2}} +\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} + +% Check whether we're in the right environment: +\def\checkenv#1{% + \def\temp{#1}% + \ifx\thisenv\temp + \else + \badenverr + \fi +} + +% Environment mismatch, #1 expected: +\def\badenverr{% + \errhelp = \EMsimple + \errmessage{This command can appear only \inenvironment\temp, + not \inenvironment\thisenv}% +} +\def\inenvironment#1{% + \ifx#1\empty + outside of any environment% + \else + in environment \expandafter\string#1% + \fi +} + +% @end foo executes the definition of \Efoo. +% But first, it executes a specialized version of \checkenv +% +\parseargdef\end{% + \if 1\csname iscond.#1\endcsname + \else + % The general wording of \badenverr may not be ideal. + \expandafter\checkenv\csname#1\endcsname + \csname E#1\endcsname + \endgroup + \fi +} + +\newhelp\EMsimple{Press RETURN to continue.} + + +% Be sure we're in horizontal mode when doing a tie, since we make space +% equivalent to this in @example-like environments. Otherwise, a space +% at the beginning of a line will start with \penalty -- and +% since \penalty is valid in vertical mode, we'd end up putting the +% penalty on the vertical list instead of in the new paragraph. +{\catcode`@ = 11 + % Avoid using \@M directly, because that causes trouble + % if the definition is written into an index file. + \global\let\tiepenalty = \@M + \gdef\tie{\leavevmode\penalty\tiepenalty\ } +} + +% @: forces normal size whitespace following. +\def\:{\spacefactor=1000 } + +% @* forces a line break. +\def\*{\unskip\hfil\break\hbox{}\ignorespaces} + +% @/ allows a line break. +\let\/=\allowbreak + +% @. is an end-of-sentence period. +\def\.{.\spacefactor=\endofsentencespacefactor\space} + +% @! is an end-of-sentence bang. +\def\!{!\spacefactor=\endofsentencespacefactor\space} + +% @? is an end-of-sentence query. +\def\?{?\spacefactor=\endofsentencespacefactor\space} + +% @frenchspacing on|off says whether to put extra space after punctuation. +% +\def\onword{on} +\def\offword{off} +% +\parseargdef\frenchspacing{% + \def\temp{#1}% + \ifx\temp\onword \plainfrenchspacing + \else\ifx\temp\offword \plainnonfrenchspacing + \else + \errhelp = \EMsimple + \errmessage{Unknown @frenchspacing option `\temp', must be on|off}% + \fi\fi +} + +% @w prevents a word break. Without the \leavevmode, @w at the +% beginning of a paragraph, when TeX is still in vertical mode, would +% produce a whole line of output instead of starting the paragraph. +\def\w#1{\leavevmode\hbox{#1}} + +% @group ... @end group forces ... to be all on one page, by enclosing +% it in a TeX vbox. We use \vtop instead of \vbox to construct the box +% to keep its height that of a normal line. According to the rules for +% \topskip (p.114 of the TeXbook), the glue inserted is +% max (\topskip - \ht (first item), 0). If that height is large, +% therefore, no glue is inserted, and the space between the headline and +% the text is small, which looks bad. +% +% Another complication is that the group might be very large. This can +% cause the glue on the previous page to be unduly stretched, because it +% does not have much material. In this case, it's better to add an +% explicit \vfill so that the extra space is at the bottom. The +% threshold for doing this is if the group is more than \vfilllimit +% percent of a page (\vfilllimit can be changed inside of @tex). +% +\newbox\groupbox +\def\vfilllimit{0.7} +% +\envdef\group{% + \ifnum\catcode`\^^M=\active \else + \errhelp = \groupinvalidhelp + \errmessage{@group invalid in context where filling is enabled}% + \fi + \startsavinginserts + % + \setbox\groupbox = \vtop\bgroup + % Do @comment since we are called inside an environment such as + % @example, where each end-of-line in the input causes an + % end-of-line in the output. We don't want the end-of-line after + % the `@group' to put extra space in the output. Since @group + % should appear on a line by itself (according to the Texinfo + % manual), we don't worry about eating any user text. + \comment +} +% +% The \vtop produces a box with normal height and large depth; thus, TeX puts +% \baselineskip glue before it, and (when the next line of text is done) +% \lineskip glue after it. Thus, space below is not quite equal to space +% above. But it's pretty close. +\def\Egroup{% + % To get correct interline space between the last line of the group + % and the first line afterwards, we have to propagate \prevdepth. + \endgraf % Not \par, as it may have been set to \lisppar. + \global\dimen1 = \prevdepth + \egroup % End the \vtop. + \addgroupbox + \prevdepth = \dimen1 + \checkinserts +} + +\def\addgroupbox{ + % \dimen0 is the vertical size of the group's box. + \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox + % \dimen2 is how much space is left on the page (more or less). + \dimen2 = \pageheight \advance\dimen2 by -\pagetotal + % if the group doesn't fit on the current page, and it's a big big + % group, force a page break. + \ifdim \dimen0 > \dimen2 + \ifdim \pagetotal < \vfilllimit\pageheight + \page + \fi + \fi + \box\groupbox +} + +% +% TeX puts in an \escapechar (i.e., `@') at the beginning of the help +% message, so this ends up printing `@group can only ...'. +% +\newhelp\groupinvalidhelp{% +group can only be used in environments such as @example,^^J% +where each line of input produces a line of output.} + +% @need space-in-mils +% forces a page break if there is not space-in-mils remaining. + +\newdimen\mil \mil=0.001in + +\parseargdef\need{% + % Ensure vertical mode, so we don't make a big box in the middle of a + % paragraph. + \par + % + % If the @need value is less than one line space, it's useless. + \dimen0 = #1\mil + \dimen2 = \ht\strutbox + \advance\dimen2 by \dp\strutbox + \ifdim\dimen0 > \dimen2 + % + % Do a \strut just to make the height of this box be normal, so the + % normal leading is inserted relative to the preceding line. + % And a page break here is fine. + \vtop to #1\mil{\strut\vfil}% + % + % TeX does not even consider page breaks if a penalty added to the + % main vertical list is 10000 or more. But in order to see if the + % empty box we just added fits on the page, we must make it consider + % page breaks. On the other hand, we don't want to actually break the + % page after the empty box. So we use a penalty of 9999. + % + % There is an extremely small chance that TeX will actually break the + % page at this \penalty, if there are no other feasible breakpoints in + % sight. (If the user is using lots of big @group commands, which + % almost-but-not-quite fill up a page, TeX will have a hard time doing + % good page breaking, for example.) However, I could not construct an + % example where a page broke at this \penalty; if it happens in a real + % document, then we can reconsider our strategy. + \penalty9999 + % + % Back up by the size of the box, whether we did a page break or not. + \kern -#1\mil + % + % Do not allow a page break right after this kern. + \nobreak + \fi +} + +% @br forces paragraph break (and is undocumented). + +\let\br = \par + +% @page forces the start of a new page. +% +\def\page{\par\vfill\supereject} + +% @exdent text.... +% outputs text on separate line in roman font, starting at standard page margin + +% This records the amount of indent in the innermost environment. +% That's how much \exdent should take out. +\newskip\exdentamount + +% This defn is used inside fill environments such as @defun. +\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} + +% This defn is used inside nofill environments such as @example. +\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount + \leftline{\hskip\leftskip{\rm#1}}}} + +% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current +% paragraph. For more general purposes, use the \margin insertion +% class. WHICH is `l' or `r'. Not documented, written for gawk manual. +% +\newskip\inmarginspacing \inmarginspacing=1cm +\def\strutdepth{\dp\strutbox} +% +\def\doinmargin#1#2{\strut\vadjust{% + \nobreak + \kern-\strutdepth + \vtop to \strutdepth{% + \baselineskip=\strutdepth + \vss + % if you have multiple lines of stuff to put here, you'll need to + % make the vbox yourself of the appropriate size. + \ifx#1l% + \llap{\ignorespaces #2\hskip\inmarginspacing}% + \else + \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}% + \fi + \null + }% +}} +\def\inleftmargin{\doinmargin l} +\def\inrightmargin{\doinmargin r} +% +% @inmargin{TEXT [, RIGHT-TEXT]} +% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right; +% else use TEXT for both). +% +\def\inmargin#1{\parseinmargin #1,,\finish} +\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing. + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \def\lefttext{#1}% have both texts + \def\righttext{#2}% + \else + \def\lefttext{#1}% have only one text + \def\righttext{#1}% + \fi + % + \ifodd\pageno + \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin + \else + \def\temp{\inleftmargin\lefttext}% + \fi + \temp +} + +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). This command +% is not documented, not supported, and doesn't work. +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + +% @include FILE -- \input text of FILE. +% +\def\include{\parseargusing\filenamecatcodes\includezzz} +\def\includezzz#1{% + \pushthisfilestack + \def\thisfile{#1}% + {% + \makevalueexpandable % we want to expand any @value in FILE. + \turnoffactive % and allow special characters in the expansion + \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @include of #1^^J}% + \edef\temp{\noexpand\input #1 }% + % + % This trickery is to read FILE outside of a group, in case it makes + % definitions, etc. + \expandafter + }\temp + \popthisfilestack +} +\def\filenamecatcodes{% + \catcode`\\=\other + \catcode`~=\other + \catcode`^=\other + \catcode`_=\other + \catcode`|=\other + \catcode`<=\other + \catcode`>=\other + \catcode`+=\other + \catcode`-=\other + \catcode`\`=\other + \catcode`\'=\other +} + +\def\pushthisfilestack{% + \expandafter\pushthisfilestackX\popthisfilestack\StackTerm +} +\def\pushthisfilestackX{% + \expandafter\pushthisfilestackY\thisfile\StackTerm +} +\def\pushthisfilestackY #1\StackTerm #2\StackTerm {% + \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% +} + +\def\popthisfilestack{\errthisfilestackempty} +\def\errthisfilestackempty{\errmessage{Internal error: + the stack of filenames is empty.}} +% +\def\thisfile{} + +% @center line +% outputs that line, centered. +% +\parseargdef\center{% + \ifhmode + \let\centersub\centerH + \else + \let\centersub\centerV + \fi + \centersub{\hfil \ignorespaces#1\unskip \hfil}% + \let\centersub\relax % don't let the definition persist, just in case +} +\def\centerH#1{{% + \hfil\break + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{#1}% + \break +}} +% +\newcount\centerpenalty +\def\centerV#1{% + % The idea here is the same as in \startdefun, \cartouche, etc.: if + % @center is the first thing after a section heading, we need to wipe + % out the negative parskip inserted by \sectionheading, but still + % prevent a page break here. + \centerpenalty = \lastpenalty + \ifnum\centerpenalty>10000 \vskip\parskip \fi + \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi + \line{\kern\leftskip #1\kern\rightskip}% +} + +% @sp n outputs n lines of vertical space +% +\parseargdef\sp{\vskip #1\baselineskip} + +% @comment ...line which is ignored... +% @c is the same as @comment +% @ignore ... @end ignore is another way to write a comment +% +\def\comment{\begingroup \catcode`\^^M=\active% +\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other\commentxxx}% + +{\catcode`\^^M=\active% +\gdef\commentxxx#1^^M{\endgroup% +\futurelet\nexttoken\commentxxxx}% +\gdef\commentxxxx{\ifx\nexttoken\aftermacro\expandafter\comment\fi}% +} + +\def\c{\begingroup \catcode`\^^M=\active% +\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% +\cxxx} +{\catcode`\^^M=\active \gdef\cxxx#1^^M{\endgroup}} +% See comment in \scanmacro about why the definitions of @c and @comment differ + +% @paragraphindent NCHARS +% We'll use ems for NCHARS, close enough. +% NCHARS can also be the word `asis' or `none'. +% We cannot feasibly implement @paragraphindent asis, though. +% +\def\asisword{asis} % no translation, these are keywords +\def\noneword{none} +% +\parseargdef\paragraphindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \defaultparindent = 0pt + \else + \defaultparindent = #1em + \fi + \fi + \parindent = \defaultparindent +} + +% @exampleindent NCHARS +% We'll use ems for NCHARS like @paragraphindent. +% It seems @exampleindent asis isn't necessary, but +% I preserve it to make it similar to @paragraphindent. +\parseargdef\exampleindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \lispnarrowing = 0pt + \else + \lispnarrowing = #1em + \fi + \fi +} + +% @firstparagraphindent WORD +% If WORD is `none', then suppress indentation of the first paragraph +% after a section heading. If WORD is `insert', then do indent at such +% paragraphs. +% +% The paragraph indentation is suppressed or not by calling +% \suppressfirstparagraphindent, which the sectioning commands do. +% We switch the definition of this back and forth according to WORD. +% By default, we suppress indentation. +% +\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} +\def\insertword{insert} +% +\parseargdef\firstparagraphindent{% + \def\temp{#1}% + \ifx\temp\noneword + \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent + \else\ifx\temp\insertword + \let\suppressfirstparagraphindent = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @firstparagraphindent option `\temp'}% + \fi\fi +} + +% Here is how we actually suppress indentation. Redefine \everypar to +% \kern backwards by \parindent, and then reset itself to empty. +% +% We also make \indent itself not actually do anything until the next +% paragraph. +% +\gdef\dosuppressfirstparagraphindent{% + \gdef\indent {\restorefirstparagraphindent \indent}% + \gdef\noindent{\restorefirstparagraphindent \noindent}% + \global\everypar = {\kern -\parindent \restorefirstparagraphindent}% +} +% +\gdef\restorefirstparagraphindent{% + \global\let\indent = \ptexindent + \global\let\noindent = \ptexnoindent + \global\everypar = {}% +} + + +% @refill is a no-op. +\let\refill=\relax + +% @setfilename INFO-FILENAME - ignored +\let\setfilename=\comment + +% @bye. +\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} + + +\message{pdf,} +% adobe `portable' document format +\newcount\tempnum +\newcount\lnkcount +\newtoks\filename +\newcount\filenamelength +\newcount\pgn +\newtoks\toksA +\newtoks\toksB +\newtoks\toksC +\newtoks\toksD +\newbox\boxA +\newbox\boxB +\newcount\countA +\newif\ifpdf +\newif\ifpdfmakepagedest + +% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 +% can be set). So we test for \relax and 0 as well as being undefined. +\ifx\pdfoutput\thisisundefined +\else + \ifx\pdfoutput\relax + \else + \ifcase\pdfoutput + \else + \pdftrue + \fi + \fi +\fi + +% PDF uses PostScript string constants for the names of xref targets, +% for display in the outlines, and in other places. Thus, we have to +% double any backslashes. Otherwise, a name like "\node" will be +% interpreted as a newline (\n), followed by o, d, e. Not good. +% +% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and +% related messages. The final outcome is that it is up to the TeX user +% to double the backslashes and otherwise make the string valid, so +% that's what we do. pdftex 1.30.0 (ca.2005) introduced a primitive to +% do this reliably, so we use it. + +% #1 is a control sequence in which to do the replacements, +% which we \xdef. +\def\txiescapepdf#1{% + \ifx\pdfescapestring\thisisundefined + % No primitive available; should we give a warning or log? + % Many times it won't matter. + \else + % The expandable \pdfescapestring primitive escapes parentheses, + % backslashes, and other special chars. + \xdef#1{\pdfescapestring{#1}}% + \fi +} + +\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images +with PDF output, and none of those formats could be found. (.eps cannot +be supported due to the design of the PDF format; use regular TeX (DVI +output) for that.)} + +\ifpdf + % + % Color manipulation macros using ideas from pdfcolor.tex, + % except using rgb instead of cmyk; the latter is said to render as a + % very dark gray on-screen and a very dark halftone in print, instead + % of actual black. The dark red here is dark enough to print on paper as + % nearly black, but still distinguishable for online viewing. We use + % black by default, though. + \def\rgbDarkRed{0.50 0.09 0.12} + \def\rgbBlack{0 0 0} + % + % k sets the color for filling (usual text, etc.); + % K sets the color for stroking (thin rules, e.g., normal _'s). + \def\pdfsetcolor#1{\pdfliteral{#1 rg #1 RG}} + % + % Set color, and create a mark which defines \thiscolor accordingly, + % so that \makeheadline knows which color to restore. + \def\setcolor#1{% + \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}% + \domark + \pdfsetcolor{#1}% + } + % + \def\maincolor{\rgbBlack} + \pdfsetcolor{\maincolor} + \edef\thiscolor{\maincolor} + \def\lastcolordefs{} + % + \def\makefootline{% + \baselineskip24pt + \line{\pdfsetcolor{\maincolor}\the\footline}% + } + % + \def\makeheadline{% + \vbox to 0pt{% + \vskip-22.5pt + \line{% + \vbox to8.5pt{}% + % Extract \thiscolor definition from the marks. + \getcolormarks + % Typeset the headline with \maincolor, then restore the color. + \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}% + }% + \vss + }% + \nointerlineskip + } + % + % + \pdfcatalog{/PageMode /UseOutlines} + % + % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). + \def\dopdfimage#1#2#3{% + \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% + \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% + % + % pdftex (and the PDF format) support .pdf, .png, .jpg (among + % others). Let's try in that order, PDF first since if + % someone has a scalable image, presumably better to use that than a + % bitmap. + \let\pdfimgext=\empty + \begingroup + \openin 1 #1.pdf \ifeof 1 + \openin 1 #1.PDF \ifeof 1 + \openin 1 #1.png \ifeof 1 + \openin 1 #1.jpg \ifeof 1 + \openin 1 #1.jpeg \ifeof 1 + \openin 1 #1.JPG \ifeof 1 + \errhelp = \nopdfimagehelp + \errmessage{Could not find image file #1 for pdf}% + \else \gdef\pdfimgext{JPG}% + \fi + \else \gdef\pdfimgext{jpeg}% + \fi + \else \gdef\pdfimgext{jpg}% + \fi + \else \gdef\pdfimgext{png}% + \fi + \else \gdef\pdfimgext{PDF}% + \fi + \else \gdef\pdfimgext{pdf}% + \fi + \closein 1 + \endgroup + % + % without \immediate, ancient pdftex seg faults when the same image is + % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) + \ifnum\pdftexversion < 14 + \immediate\pdfimage + \else + \immediate\pdfximage + \fi + \ifdim \wd0 >0pt width \pdfimagewidth \fi + \ifdim \wd2 >0pt height \pdfimageheight \fi + \ifnum\pdftexversion<13 + #1.\pdfimgext + \else + {#1.\pdfimgext}% + \fi + \ifnum\pdftexversion < 14 \else + \pdfrefximage \pdflastximage + \fi} + % + \def\pdfmkdest#1{{% + % We have to set dummies so commands such as @code, and characters + % such as \, aren't expanded when present in a section title. + \indexnofonts + \turnoffactive + \makevalueexpandable + \def\pdfdestname{#1}% + \txiescapepdf\pdfdestname + \safewhatsit{\pdfdest name{\pdfdestname} xyz}% + }} + % + % used to mark target names; must be expandable. + \def\pdfmkpgn#1{#1} + % + % by default, use black for everything. + \def\urlcolor{\rgbBlack} + \def\linkcolor{\rgbBlack} + \def\endlink{\setcolor{\maincolor}\pdfendlink} + % + % Adding outlines to PDF; macros for calculating structure of outlines + % come from Petr Olsak + \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% + \else \csname#1\endcsname \fi} + \def\advancenumber#1{\tempnum=\expnumber{#1}\relax + \advance\tempnum by 1 + \expandafter\xdef\csname#1\endcsname{\the\tempnum}} + % + % #1 is the section text, which is what will be displayed in the + % outline by the pdf viewer. #2 is the pdf expression for the number + % of subentries (or empty, for subsubsections). #3 is the node text, + % which might be empty if this toc entry had no corresponding node. + % #4 is the page number + % + \def\dopdfoutline#1#2#3#4{% + % Generate a link to the node text if that exists; else, use the + % page number. We could generate a destination for the section + % text in the case where a section has no node, but it doesn't + % seem worth the trouble, since most documents are normally structured. + \edef\pdfoutlinedest{#3}% + \ifx\pdfoutlinedest\empty + \def\pdfoutlinedest{#4}% + \else + \txiescapepdf\pdfoutlinedest + \fi + % + % Also escape PDF chars in the display string. + \edef\pdfoutlinetext{#1}% + \txiescapepdf\pdfoutlinetext + % + \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% + } + % + \def\pdfmakeoutlines{% + \begingroup + % Read toc silently, to get counts of subentries for \pdfoutline. + \def\partentry##1##2##3##4{}% ignore parts in the outlines + \def\numchapentry##1##2##3##4{% + \def\thischapnum{##2}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + }% + \def\numsecentry##1##2##3##4{% + \advancenumber{chap\thischapnum}% + \def\thissecnum{##2}% + \def\thissubsecnum{0}% + }% + \def\numsubsecentry##1##2##3##4{% + \advancenumber{sec\thissecnum}% + \def\thissubsecnum{##2}% + }% + \def\numsubsubsecentry##1##2##3##4{% + \advancenumber{subsec\thissubsecnum}% + }% + \def\thischapnum{0}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + % + % use \def rather than \let here because we redefine \chapentry et + % al. a second time, below. + \def\appentry{\numchapentry}% + \def\appsecentry{\numsecentry}% + \def\appsubsecentry{\numsubsecentry}% + \def\appsubsubsecentry{\numsubsubsecentry}% + \def\unnchapentry{\numchapentry}% + \def\unnsecentry{\numsecentry}% + \def\unnsubsecentry{\numsubsecentry}% + \def\unnsubsubsecentry{\numsubsubsecentry}% + \readdatafile{toc}% + % + % Read toc second time, this time actually producing the outlines. + % The `-' means take the \expnumber as the absolute number of + % subentries, which we calculated on our first read of the .toc above. + % + % We use the node names as the destinations. + \def\numchapentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% + \def\numsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% + \def\numsubsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% + \def\numsubsubsecentry##1##2##3##4{% count is always zero + \dopdfoutline{##1}{}{##3}{##4}}% + % + % PDF outlines are displayed using system fonts, instead of + % document fonts. Therefore we cannot use special characters, + % since the encoding is unknown. For example, the eogonek from + % Latin 2 (0xea) gets translated to a | character. Info from + % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. + % + % TODO this right, we have to translate 8-bit characters to + % their "best" equivalent, based on the @documentencoding. Too + % much work for too little return. Just use the ASCII equivalents + % we use for the index sort strings. + % + \indexnofonts + \setupdatafile + % We can have normal brace characters in the PDF outlines, unlike + % Texinfo index files. So set that up. + \def\{{\lbracecharliteral}% + \def\}{\rbracecharliteral}% + \catcode`\\=\active \otherbackslash + \input \tocreadfilename + \endgroup + } + {\catcode`[=1 \catcode`]=2 + \catcode`{=\other \catcode`}=\other + \gdef\lbracecharliteral[{]% + \gdef\rbracecharliteral[}]% + ] + % + \def\skipspaces#1{\def\PP{#1}\def\D{|}% + \ifx\PP\D\let\nextsp\relax + \else\let\nextsp\skipspaces + \addtokens{\filename}{\PP}% + \advance\filenamelength by 1 + \fi + \nextsp} + \def\getfilename#1{% + \filenamelength=0 + % If we don't expand the argument now, \skipspaces will get + % snagged on things like "@value{foo}". + \edef\temp{#1}% + \expandafter\skipspaces\temp|\relax + } + \ifnum\pdftexversion < 14 + \let \startlink \pdfannotlink + \else + \let \startlink \pdfstartlink + \fi + % make a live url in pdf output. + \def\pdfurl#1{% + \begingroup + % it seems we really need yet another set of dummies; have not + % tried to figure out what each command should do in the context + % of @url. for now, just make @/ a no-op, that's the only one + % people have actually reported a problem with. + % + \normalturnoffactive + \def\@{@}% + \let\/=\empty + \makevalueexpandable + % do we want to go so far as to use \indexnofonts instead of just + % special-casing \var here? + \def\var##1{##1}% + % + \leavevmode\setcolor{\urlcolor}% + \startlink attr{/Border [0 0 0]}% + user{/Subtype /Link /A << /S /URI /URI (#1) >>}% + \endgroup} + \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} + \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} + \def\maketoks{% + \expandafter\poptoks\the\toksA|ENDTOKS|\relax + \ifx\first0\adn0 + \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 + \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 + \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 + \else + \ifnum0=\countA\else\makelink\fi + \ifx\first.\let\next=\done\else + \let\next=\maketoks + \addtokens{\toksB}{\the\toksD} + \ifx\first,\addtokens{\toksB}{\space}\fi + \fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \next} + \def\makelink{\addtokens{\toksB}% + {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} + \def\pdflink#1{% + \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} + \setcolor{\linkcolor}#1\endlink} + \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} +\else + % non-pdf mode + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\setcolor = \gobble + \let\pdfsetcolor = \gobble + \let\pdfmakeoutlines = \relax +\fi % \ifx\pdfoutput + + +\message{fonts,} + +% Change the current font style to #1, remembering it in \curfontstyle. +% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in +% italics, not bold italics. +% +\def\setfontstyle#1{% + \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. + \csname ten#1\endcsname % change the current font +} + +% Select #1 fonts with the current style. +% +\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} + +\def\rm{\fam=0 \setfontstyle{rm}} +\def\it{\fam=\itfam \setfontstyle{it}} +\def\sl{\fam=\slfam \setfontstyle{sl}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} +\def\tt{\fam=\ttfam \setfontstyle{tt}} + +% Unfortunately, we have to override this for titles and the like, since +% in those cases "rm" is bold. Sigh. +\def\rmisbold{\rm\def\curfontstyle{bf}} + +% Texinfo sort of supports the sans serif font style, which plain TeX does not. +% So we set up a \sf. +\newfam\sffam +\def\sf{\fam=\sffam \setfontstyle{sf}} +\let\li = \sf % Sometimes we call it \li, not \sf. + +% We don't need math for this font style. +\def\ttsl{\setfontstyle{ttsl}} + + +% Set the baselineskip to #1, and the lineskip and strut size +% correspondingly. There is no deep meaning behind these magic numbers +% used as factors; they just match (closely enough) what Knuth defined. +% +\def\lineskipfactor{.08333} +\def\strutheightpercent{.70833} +\def\strutdepthpercent {.29167} +% +% can get a sort of poor man's double spacing by redefining this. +\def\baselinefactor{1} +% +\newdimen\textleading +\def\setleading#1{% + \dimen0 = #1\relax + \normalbaselineskip = \baselinefactor\dimen0 + \normallineskip = \lineskipfactor\normalbaselineskip + \normalbaselines + \setbox\strutbox =\hbox{% + \vrule width0pt height\strutheightpercent\baselineskip + depth \strutdepthpercent \baselineskip + }% +} + +% PDF CMaps. See also LaTeX's t1.cmap. +% +% do nothing with this by default. +\expandafter\let\csname cmapOT1\endcsname\gobble +\expandafter\let\csname cmapOT1IT\endcsname\gobble +\expandafter\let\csname cmapOT1TT\endcsname\gobble + +% if we are producing pdf, and we have \pdffontattr, then define cmaps. +% (\pdffontattr was introduced many years ago, but people still run +% older pdftex's; it's easy to conditionalize, so we do.) +\ifpdf \ifx\pdffontattr\thisisundefined \else + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1-0) +%%Title: (TeX-OT1-0 TeX OT1 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1) +/Supplement 0 +>> def +/CMapName /TeX-OT1-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<23> <26> <0023> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +40 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1IT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1IT-0) +%%Title: (TeX-OT1IT-0 TeX OT1IT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1IT) +/Supplement 0 +>> def +/CMapName /TeX-OT1IT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<25> <26> <0025> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +42 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<23> <0023> +<24> <00A3> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1IT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1TT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1TT-0) +%%Title: (TeX-OT1TT-0 TeX OT1TT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1TT) +/Supplement 0 +>> def +/CMapName /TeX-OT1TT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +5 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<21> <26> <0021> +<28> <5F> <0028> +<61> <7E> <0061> +endbfrange +32 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <2191> +<0C> <2193> +<0D> <0027> +<0E> <00A1> +<0F> <00BF> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<20> <2423> +<27> <2019> +<60> <2018> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1TT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +\fi\fi + + +% Set the font macro #1 to the font named \fontprefix#2. +% #3 is the font's design size, #4 is a scale factor, #5 is the CMap +% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit). +% Example: +% #1 = \textrm +% #2 = \rmshape +% #3 = 10 +% #4 = \mainmagstep +% #5 = OT1 +% +\def\setfont#1#2#3#4#5{% + \font#1=\fontprefix#2#3 scaled #4 + \csname cmap#5\endcsname#1% +} +% This is what gets called when #5 of \setfont is empty. +\let\cmap\gobble +% +% (end of cmaps) + +% Use cm as the default font prefix. +% To specify the font prefix, you must define \fontprefix +% before you read in texinfo.tex. +\ifx\fontprefix\thisisundefined +\def\fontprefix{cm} +\fi +% Support font families that don't use the same naming scheme as CM. +\def\rmshape{r} +\def\rmbshape{bx} % where the normal face is bold +\def\bfshape{b} +\def\bxshape{bx} +\def\ttshape{tt} +\def\ttbshape{tt} +\def\ttslshape{sltt} +\def\itshape{ti} +\def\itbshape{bxti} +\def\slshape{sl} +\def\slbshape{bxsl} +\def\sfshape{ss} +\def\sfbshape{ss} +\def\scshape{csc} +\def\scbshape{csc} + +% Definitions for a main text size of 11pt. (The default in Texinfo.) +% +\def\definetextfontsizexi{% +% Text fonts (11.2pt, magstep1). +\def\textnominalsize{11pt} +\edef\mainmagstep{\magstephalf} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep +\def\textecsize{1095} + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstep1}{OT1} +\setfont\deftt\ttshape{10}{\magstep1}{OT1TT} +\setfont\defsl\slshape{10}{\magstep1}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf +\let\tenttsl=\defttsl \let\tensl=\defsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 +\def\smallecsize{0900} + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 +\def\smallerecsize{0800} + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\titleecsize{2074} + +% Chapter (and unnumbered) fonts (17.28pt). +\def\chapnominalsize{17pt} +\setfont\chaprm\rmbshape{12}{\magstep2}{OT1} +\setfont\chapit\itbshape{10}{\magstep3}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep3}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT} +\setfont\chapsf\sfbshape{17}{1000}{OT1} +\let\chapbf=\chaprm +\setfont\chapsc\scbshape{10}{\magstep3}{OT1} +\font\chapi=cmmi12 scaled \magstep2 +\font\chapsy=cmsy10 scaled \magstep3 +\def\chapecsize{1728} + +% Section fonts (14.4pt). +\def\secnominalsize{14pt} +\setfont\secrm\rmbshape{12}{\magstep1}{OT1} +\setfont\secrmnotbold\rmshape{12}{\magstep1}{OT1} +\setfont\secit\itbshape{10}{\magstep2}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep2}{OT1} +\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\secsf\sfbshape{12}{\magstep1}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep2}{OT1} +\font\seci=cmmi12 scaled \magstep1 +\font\secsy=cmsy10 scaled \magstep2 +\def\sececsize{1440} + +% Subsection fonts (13.15pt). +\def\ssecnominalsize{13pt} +\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1} +\setfont\ssecit\itbshape{10}{1315}{OT1IT} +\setfont\ssecsl\slbshape{10}{1315}{OT1} +\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT} +\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1315}{OT1} +\font\sseci=cmmi12 scaled \magstephalf +\font\ssecsy=cmsy10 scaled 1315 +\def\ssececsize{1200} + +% Reduced fonts for @acro in text (10pt). +\def\reducednominalsize{10pt} +\setfont\reducedrm\rmshape{10}{1000}{OT1} +\setfont\reducedtt\ttshape{10}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{1000}{OT1} +\setfont\reducedit\itshape{10}{1000}{OT1IT} +\setfont\reducedsl\slshape{10}{1000}{OT1} +\setfont\reducedsf\sfshape{10}{1000}{OT1} +\setfont\reducedsc\scshape{10}{1000}{OT1} +\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT} +\font\reducedi=cmmi10 +\font\reducedsy=cmsy10 +\def\reducedecsize{1000} + +\textleading = 13.2pt % line spacing for 11pt CM +\textfonts % reset the current fonts +\rm +} % end of 11pt text font size definitions, \definetextfontsizexi + + +% Definitions to make the main text be 10pt Computer Modern, with +% section, chapter, etc., sizes following suit. This is for the GNU +% Press printing of the Emacs 22 manual. Maybe other manuals in the +% future. Used with @smallbook, which sets the leading to 12pt. +% +\def\definetextfontsizex{% +% Text fonts (10pt). +\def\textnominalsize{10pt} +\edef\mainmagstep{1000} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep +\def\textecsize{1000} + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstephalf}{OT1} +\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} +\setfont\defsl\slshape{10}{\magstephalf}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf +\let\tensl=\defsl \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 +\def\smallecsize{0900} + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 +\def\smallerecsize{0800} + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\titleecsize{2074} + +% Chapter fonts (14.4pt). +\def\chapnominalsize{14pt} +\setfont\chaprm\rmbshape{12}{\magstep1}{OT1} +\setfont\chapit\itbshape{10}{\magstep2}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep2}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\chapsf\sfbshape{12}{\magstep1}{OT1} +\let\chapbf\chaprm +\setfont\chapsc\scbshape{10}{\magstep2}{OT1} +\font\chapi=cmmi12 scaled \magstep1 +\font\chapsy=cmsy10 scaled \magstep2 +\def\chapecsize{1440} + +% Section fonts (12pt). +\def\secnominalsize{12pt} +\setfont\secrm\rmbshape{12}{1000}{OT1} +\setfont\secit\itbshape{10}{\magstep1}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep1}{OT1} +\setfont\sectt\ttbshape{12}{1000}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT} +\setfont\secsf\sfbshape{12}{1000}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep1}{OT1} +\font\seci=cmmi12 +\font\secsy=cmsy10 scaled \magstep1 +\def\sececsize{1200} + +% Subsection fonts (10pt). +\def\ssecnominalsize{10pt} +\setfont\ssecrm\rmbshape{10}{1000}{OT1} +\setfont\ssecit\itbshape{10}{1000}{OT1IT} +\setfont\ssecsl\slbshape{10}{1000}{OT1} +\setfont\ssectt\ttbshape{10}{1000}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT} +\setfont\ssecsf\sfbshape{10}{1000}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1000}{OT1} +\font\sseci=cmmi10 +\font\ssecsy=cmsy10 +\def\ssececsize{1000} + +% Reduced fonts for @acro in text (9pt). +\def\reducednominalsize{9pt} +\setfont\reducedrm\rmshape{9}{1000}{OT1} +\setfont\reducedtt\ttshape{9}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{900}{OT1} +\setfont\reducedit\itshape{9}{1000}{OT1IT} +\setfont\reducedsl\slshape{9}{1000}{OT1} +\setfont\reducedsf\sfshape{9}{1000}{OT1} +\setfont\reducedsc\scshape{10}{900}{OT1} +\setfont\reducedttsl\ttslshape{10}{900}{OT1TT} +\font\reducedi=cmmi9 +\font\reducedsy=cmsy9 +\def\reducedecsize{0900} + +\divide\parskip by 2 % reduce space between paragraphs +\textleading = 12pt % line spacing for 10pt CM +\textfonts % reset the current fonts +\rm +} % end of 10pt text font size definitions, \definetextfontsizex + + +% We provide the user-level command +% @fonttextsize 10 +% (or 11) to redefine the text font size. pt is assumed. +% +\def\xiword{11} +\def\xword{10} +\def\xwordpt{10pt} +% +\parseargdef\fonttextsize{% + \def\textsizearg{#1}% + %\wlog{doing @fonttextsize \textsizearg}% + % + % Set \globaldefs so that documents can use this inside @tex, since + % makeinfo 4.8 does not support it, but we need it nonetheless. + % + \begingroup \globaldefs=1 + \ifx\textsizearg\xword \definetextfontsizex + \else \ifx\textsizearg\xiword \definetextfontsizexi + \else + \errhelp=\EMsimple + \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'} + \fi\fi + \endgroup +} + +% In order for the font changes to affect most math symbols and letters, +% we have to define the \textfont of the standard families. We don't +% bother to reset \scriptfont and \scriptscriptfont; awaiting user need. +% +\def\resetmathfonts{% + \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy + \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf + \textfont\ttfam=\tentt \textfont\sffam=\tensf +} + +% The font-changing commands redefine the meanings of \tenSTYLE, instead +% of just \STYLE. We do this because \STYLE needs to also set the +% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire +% \tenSTYLE to set the current font. +% +% Each font-changing command also sets the names \lsize (one size lower) +% and \lllsize (three sizes lower). These relative commands are used +% in, e.g., the LaTeX logo and acronyms. +% +% This all needs generalizing, badly. +% +\def\textfonts{% + \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl + \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc + \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy + \let\tenttsl=\textttsl + \def\curfontsize{text}% + \def\lsize{reduced}\def\lllsize{smaller}% + \resetmathfonts \setleading{\textleading}} +\def\titlefonts{% + \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl + \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc + \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy + \let\tenttsl=\titlettsl + \def\curfontsize{title}% + \def\lsize{chap}\def\lllsize{subsec}% + \resetmathfonts \setleading{27pt}} +\def\titlefont#1{{\titlefonts\rmisbold #1}} +\def\chapfonts{% + \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl + \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \let\tenttsl=\chapttsl + \def\curfontsize{chap}% + \def\lsize{sec}\def\lllsize{text}% + \resetmathfonts \setleading{19pt}} +\def\secfonts{% + \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl + \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc + \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy + \let\tenttsl=\secttsl + \def\curfontsize{sec}% + \def\lsize{subsec}\def\lllsize{reduced}% + \resetmathfonts \setleading{17pt}} +\def\subsecfonts{% + \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl + \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc + \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy + \let\tenttsl=\ssecttsl + \def\curfontsize{ssec}% + \def\lsize{text}\def\lllsize{small}% + \resetmathfonts \setleading{15pt}} +\let\subsubsecfonts = \subsecfonts +\def\reducedfonts{% + \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl + \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc + \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy + \let\tenttsl=\reducedttsl + \def\curfontsize{reduced}% + \def\lsize{small}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallfonts{% + \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl + \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc + \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy + \let\tenttsl=\smallttsl + \def\curfontsize{small}% + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallerfonts{% + \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl + \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc + \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy + \let\tenttsl=\smallerttsl + \def\curfontsize{smaller}% + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{9.5pt}} + +% Fonts for short table of contents. +\setfont\shortcontrm\rmshape{12}{1000}{OT1} +\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 +\setfont\shortcontsl\slshape{12}{1000}{OT1} +\setfont\shortconttt\ttshape{12}{1000}{OT1TT} + +% Define these just so they can be easily changed for other fonts. +\def\angleleft{$\langle$} +\def\angleright{$\rangle$} + +% Set the fonts to use with the @small... environments. +\let\smallexamplefonts = \smallfonts + +% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample +% can fit this many characters: +% 8.5x11=86 smallbook=72 a4=90 a5=69 +% If we use \scriptfonts (8pt), then we can fit this many characters: +% 8.5x11=90+ smallbook=80 a4=90+ a5=77 +% For me, subjectively, the few extra characters that fit aren't worth +% the additional smallness of 8pt. So I'm making the default 9pt. +% +% By the way, for comparison, here's what fits with @example (10pt): +% 8.5x11=71 smallbook=60 a4=75 a5=58 +% --karl, 24jan03. + +% Set up the default fonts, so we can use them for creating boxes. +% +\definetextfontsizexi + + +\message{markup,} + +% Check if we are currently using a typewriter font. Since all the +% Computer Modern typewriter fonts have zero interword stretch (and +% shrink), and it is reasonable to expect all typewriter fonts to have +% this property, we can check that font parameter. +% +\def\ifmonospace{\ifdim\fontdimen3\font=0pt } + +% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will +% define and register \INITMACRO to be called on markup style changes. +% \INITMACRO can check \currentmarkupstyle for the innermost +% style and the set of \ifmarkupSTYLE switches for all styles +% currently in effect. +\newif\ifmarkupvar +\newif\ifmarkupsamp +\newif\ifmarkupkey +%\newif\ifmarkupfile % @file == @samp. +%\newif\ifmarkupoption % @option == @samp. +\newif\ifmarkupcode +\newif\ifmarkupkbd +%\newif\ifmarkupenv % @env == @code. +%\newif\ifmarkupcommand % @command == @code. +\newif\ifmarkuptex % @tex (and part of @math, for now). +\newif\ifmarkupexample +\newif\ifmarkupverb +\newif\ifmarkupverbatim + +\let\currentmarkupstyle\empty + +\def\setupmarkupstyle#1{% + \csname markup#1true\endcsname + \def\currentmarkupstyle{#1}% + \markupstylesetup +} + +\let\markupstylesetup\empty + +\def\defmarkupstylesetup#1{% + \expandafter\def\expandafter\markupstylesetup + \expandafter{\markupstylesetup #1}% + \def#1% +} + +% Markup style setup for left and right quotes. +\defmarkupstylesetup\markupsetuplq{% + \expandafter\let\expandafter \temp + \csname markupsetuplq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuplqdefault \else \temp \fi +} + +\defmarkupstylesetup\markupsetuprq{% + \expandafter\let\expandafter \temp + \csname markupsetuprq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuprqdefault \else \temp \fi +} + +{ +\catcode`\'=\active +\catcode`\`=\active + +\gdef\markupsetuplqdefault{\let`\lq} +\gdef\markupsetuprqdefault{\let'\rq} + +\gdef\markupsetcodequoteleft{\let`\codequoteleft} +\gdef\markupsetcodequoteright{\let'\codequoteright} +} + +\let\markupsetuplqcode \markupsetcodequoteleft +\let\markupsetuprqcode \markupsetcodequoteright +% +\let\markupsetuplqexample \markupsetcodequoteleft +\let\markupsetuprqexample \markupsetcodequoteright +% +\let\markupsetuplqkbd \markupsetcodequoteleft +\let\markupsetuprqkbd \markupsetcodequoteright +% +\let\markupsetuplqsamp \markupsetcodequoteleft +\let\markupsetuprqsamp \markupsetcodequoteright +% +\let\markupsetuplqverb \markupsetcodequoteleft +\let\markupsetuprqverb \markupsetcodequoteright +% +\let\markupsetuplqverbatim \markupsetcodequoteleft +\let\markupsetuprqverbatim \markupsetcodequoteright + +% Allow an option to not use regular directed right quote/apostrophe +% (char 0x27), but instead the undirected quote from cmtt (char 0x0d). +% The undirected quote is ugly, so don't make it the default, but it +% works for pasting with more pdf viewers (at least evince), the +% lilypond developers report. xpdf does work with the regular 0x27. +% +\def\codequoteright{% + \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax + \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax + '% + \else \char'15 \fi + \else \char'15 \fi +} +% +% and a similar option for the left quote char vs. a grave accent. +% Modern fonts display ASCII 0x60 as a grave accent, so some people like +% the code environments to do likewise. +% +\def\codequoteleft{% + \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax + \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax + % [Knuth] pp. 380,381,391 + % \relax disables Spanish ligatures ?` and !` of \tt font. + \relax`% + \else \char'22 \fi + \else \char'22 \fi +} + +% Commands to set the quote options. +% +\parseargdef\codequoteundirected{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}% + \fi\fi +} +% +\parseargdef\codequotebacktick{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}% + \fi\fi +} + +% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font. +\def\noligaturesquoteleft{\relax\lq} + +% Count depth in font-changes, for error checks +\newcount\fontdepth \fontdepth=0 + +% Font commands. + +% #1 is the font command (\sl or \it), #2 is the text to slant. +% If we are in a monospaced environment, however, 1) always use \ttsl, +% and 2) do not add an italic correction. +\def\dosmartslant#1#2{% + \ifusingtt + {{\ttsl #2}\let\next=\relax}% + {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}% + \next +} +\def\smartslanted{\dosmartslant\sl} +\def\smartitalic{\dosmartslant\it} + +% Output an italic correction unless \next (presumed to be the following +% character) is such as not to need one. +\def\smartitaliccorrection{% + \ifx\next,% + \else\ifx\next-% + \else\ifx\next.% + \else\ifx\next\.% + \else\ifx\next\comma% + \else\ptexslash + \fi\fi\fi\fi\fi + \aftersmartic +} + +% Unconditional use \ttsl, and no ic. @var is set to this for defuns. +\def\ttslanted#1{{\ttsl #1}} + +% @cite is like \smartslanted except unconditionally use \sl. We never want +% ttsl for book titles, do we? +\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection} + +\def\aftersmartic{} +\def\var#1{% + \let\saveaftersmartic = \aftersmartic + \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}% + \smartslanted{#1}% +} + +\let\i=\smartitalic +\let\slanted=\smartslanted +\let\dfn=\smartslanted +\let\emph=\smartitalic + +% Explicit font changes: @r, @sc, undocumented @ii. +\def\r#1{{\rm #1}} % roman font +\def\sc#1{{\smallcaps#1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font + +% @b, explicit bold. Also @strong. +\def\b#1{{\bf #1}} +\let\strong=\b + +% @sansserif, explicit sans. +\def\sansserif#1{{\sf #1}} + +% We can't just use \exhyphenpenalty, because that only has effect at +% the end of a paragraph. Restore normal hyphenation at the end of the +% group within which \nohyphenation is presumably called. +% +\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} +\def\restorehyphenation{\hyphenchar\font = `- } + +% Set sfcode to normal for the chars that usually have another value. +% Can't use plain's \frenchspacing because it uses the `\x notation, and +% sometimes \x has an active definition that messes things up. +% +\catcode`@=11 + \def\plainfrenchspacing{% + \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m + \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m + \def\endofsentencespacefactor{1000}% for @. and friends + } + \def\plainnonfrenchspacing{% + \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000 + \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250 + \def\endofsentencespacefactor{3000}% for @. and friends + } +\catcode`@=\other +\def\endofsentencespacefactor{3000}% default + +% @t, explicit typewriter. +\def\t#1{% + {\tt \rawbackslash \plainfrenchspacing #1}% + \null +} + +% @samp. +\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} + +% @indicateurl is \samp, that is, with quotes. +\let\indicateurl=\samp + +% @code (and similar) prints in typewriter, but with spaces the same +% size as normal in the surrounding text, without hyphenation, etc. +% This is a subroutine for that. +\def\tclose#1{% + {% + % Change normal interword space to be same as for the current font. + \spaceskip = \fontdimen2\font + % + % Switch to typewriter. + \tt + % + % But `\ ' produces the large typewriter interword space. + \def\ {{\spaceskip = 0pt{} }}% + % + % Turn off hyphenation. + \nohyphenation + % + \rawbackslash + \plainfrenchspacing + #1% + }% + \null % reset spacefactor to 1000 +} + +% We *must* turn on hyphenation at `-' and `_' in @code. +% (But see \codedashfinish below.) +% Otherwise, it is too hard to avoid overfull hboxes +% in the Emacs manual, the Library manual, etc. +% +% Unfortunately, TeX uses one parameter (\hyphenchar) to control +% both hyphenation at - and hyphenation within words. +% We must therefore turn them both off (\tclose does that) +% and arrange explicitly to hyphenate at a dash. -- rms. +{ + \catcode`\-=\active \catcode`\_=\active + \catcode`\'=\active \catcode`\`=\active + \global\let'=\rq \global\let`=\lq % default definitions + % + \global\def\code{\begingroup + \setupmarkupstyle{code}% + % The following should really be moved into \setupmarkupstyle handlers. + \catcode\dashChar=\active \catcode\underChar=\active + \ifallowcodebreaks + \let-\codedash + \let_\codeunder + \else + \let-\normaldash + \let_\realunder + \fi + % Given -foo (with a single dash), we do not want to allow a break + % after the hyphen. + \global\let\codedashprev=\codedash + % + \codex + } + % + \gdef\codedash{\futurelet\next\codedashfinish} + \gdef\codedashfinish{% + \normaldash % always output the dash character itself. + % + % Now, output a discretionary to allow a line break, unless + % (a) the next character is a -, or + % (b) the preceding character is a -. + % E.g., given --posix, we do not want to allow a break after either -. + % Given --foo-bar, we do want to allow a break between the - and the b. + \ifx\next\codedash \else + \ifx\codedashprev\codedash + \else \discretionary{}{}{}\fi + \fi + % we need the space after the = for the case when \next itself is a + % space token; it would get swallowed otherwise. As in @code{- a}. + \global\let\codedashprev= \next + } +} +\def\normaldash{-} +% +\def\codex #1{\tclose{#1}\endgroup} + +\def\codeunder{% + % this is all so @math{@code{var_name}+1} can work. In math mode, _ + % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) + % will therefore expand the active definition of _, which is us + % (inside @code that is), therefore an endless loop. + \ifusingtt{\ifmmode + \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. + \else\normalunderscore \fi + \discretionary{}{}{}}% + {\_}% +} + +% An additional complication: the above will allow breaks after, e.g., +% each of the four underscores in __typeof__. This is bad. +% @allowcodebreaks provides a document-level way to turn breaking at - +% and _ on and off. +% +\newif\ifallowcodebreaks \allowcodebreakstrue + +\def\keywordtrue{true} +\def\keywordfalse{false} + +\parseargdef\allowcodebreaks{% + \def\txiarg{#1}% + \ifx\txiarg\keywordtrue + \allowcodebreakstrue + \else\ifx\txiarg\keywordfalse + \allowcodebreaksfalse + \else + \errhelp = \EMsimple + \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}% + \fi\fi +} + +% For @command, @env, @file, @option quotes seem unnecessary, +% so use \code rather than \samp. +\let\command=\code +\let\env=\code +\let\file=\code +\let\option=\code + +% @uref (abbreviation for `urlref') aka @url takes an optional +% (comma-separated) second argument specifying the text to display and +% an optional third arg as text to display instead of (rather than in +% addition to) the url itself. First (mandatory) arg is the url. + +% TeX-only option to allow changing PDF output to show only the second +% arg (if given), and not the url (which is then just the link target). +\newif\ifurefurlonlylink + +% The main macro is \urefbreak, which allows breaking at expected +% places within the url. (There used to be another version, which +% didn't support automatic breaking.) +\def\urefbreak{\begingroup \urefcatcodes \dourefbreak} +\let\uref=\urefbreak +% +\def\dourefbreak#1{\urefbreakfinish #1,,,\finish} +\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% look for second arg + \ifdim\wd0 > 0pt + \ifpdf + \ifurefurlonlylink + % PDF plus option to not display url, show just arg + \unhbox0 + \else + % PDF, normally display both arg and url for consistency, + % visibility, if the pdf is eventually used to print, etc. + \unhbox0\ (\urefcode{#1})% + \fi + \else + \unhbox0\ (\urefcode{#1})% DVI, always show arg and url + \fi + \else + \urefcode{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% Allow line breaks around only a few characters (only). +\def\urefcatcodes{% + \catcode\ampChar=\active \catcode\dotChar=\active + \catcode\hashChar=\active \catcode\questChar=\active + \catcode\slashChar=\active +} +{ + \urefcatcodes + % + \global\def\urefcode{\begingroup + \setupmarkupstyle{code}% + \urefcatcodes + \let&\urefcodeamp + \let.\urefcodedot + \let#\urefcodehash + \let?\urefcodequest + \let/\urefcodeslash + \codex + } + % + % By default, they are just regular characters. + \global\def&{\normalamp} + \global\def.{\normaldot} + \global\def#{\normalhash} + \global\def?{\normalquest} + \global\def/{\normalslash} +} + +% we put a little stretch before and after the breakable chars, to help +% line breaking of long url's. The unequal skips make look better in +% cmtt at least, especially for dots. +\def\urefprestretchamount{.13em} +\def\urefpoststretchamount{.1em} +\def\urefprestretch{\urefprebreak \hskip0pt plus\urefprestretchamount\relax} +\def\urefpoststretch{\urefpostbreak \hskip0pt plus\urefprestretchamount\relax} +% +\def\urefcodeamp{\urefprestretch \&\urefpoststretch} +\def\urefcodedot{\urefprestretch .\urefpoststretch} +\def\urefcodehash{\urefprestretch \#\urefpoststretch} +\def\urefcodequest{\urefprestretch ?\urefpoststretch} +\def\urefcodeslash{\futurelet\next\urefcodeslashfinish} +{ + \catcode`\/=\active + \global\def\urefcodeslashfinish{% + \urefprestretch \slashChar + % Allow line break only after the final / in a sequence of + % slashes, to avoid line break between the slashes in http://. + \ifx\next/\else \urefpoststretch \fi + } +} + +% One more complication: by default we'll break after the special +% characters, but some people like to break before the special chars, so +% allow that. Also allow no breaking at all, for manual control. +% +\parseargdef\urefbreakstyle{% + \def\txiarg{#1}% + \ifx\txiarg\wordnone + \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordbefore + \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordafter + \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak} + \else + \errhelp = \EMsimple + \errmessage{Unknown @urefbreakstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\wordafter{after} +\def\wordbefore{before} +\def\wordnone{none} + +\urefbreakstyle after + +% @url synonym for @uref, since that's how everyone uses it. +% +\let\url=\uref + +% rms does not like angle brackets --karl, 17may97. +% So now @email is just like @uref, unless we are pdf. +% +%\def\email#1{\angleleft{\tt #1}\angleright} +\ifpdf + \def\email#1{\doemail#1,,\finish} + \def\doemail#1,#2,#3\finish{\begingroup + \unsepspaces + \pdfurl{mailto:#1}% + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi + \endlink + \endgroup} +\else + \let\email=\uref +\fi + +% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), +% `example' (@kbd uses ttsl only inside of @example and friends), +% or `code' (@kbd uses normal tty font always). +\parseargdef\kbdinputstyle{% + \def\txiarg{#1}% + \ifx\txiarg\worddistinct + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% + \else\ifx\txiarg\wordexample + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% + \else\ifx\txiarg\wordcode + \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \else + \errhelp = \EMsimple + \errmessage{Unknown @kbdinputstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\worddistinct{distinct} +\def\wordexample{example} +\def\wordcode{code} + +% Default is `distinct'. +\kbdinputstyle distinct + +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}} + +\def\xkey{\key} +\def\kbdsub#1#2#3\par{% + \def\one{#1}\def\three{#3}\def\threex{??}% + \ifx\one\xkey\ifx\threex\three \key{#2}% + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +} + +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} + +% @clicksequence{File @click{} Open ...} +\def\clicksequence#1{\begingroup #1\endgroup} + +% @clickstyle @arrow (by default) +\parseargdef\clickstyle{\def\click{#1}} +\def\click{\arrow} + +% Typeset a dimension, e.g., `in' or `pt'. The only reason for the +% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. +% +\def\dmn#1{\thinspace #1} + +% @acronym for "FBI", "NATO", and the like. +% We print this one point size smaller, since it's intended for +% all-uppercase. +% +\def\acronym#1{\doacronym #1,,\finish} +\def\doacronym#1,#2,#3\finish{% + {\selectfonts\lsize #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi + \null % reset \spacefactor=1000 +} + +% @abbr for "Comput. J." and the like. +% No font change, but don't do end-of-sentence spacing. +% +\def\abbr#1{\doabbr #1,,\finish} +\def\doabbr#1,#2,#3\finish{% + {\plainfrenchspacing #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi + \null % reset \spacefactor=1000 +} + +% @asis just yields its argument. Used with @table, for example. +% +\def\asis#1{#1} + +% @math outputs its argument in math mode. +% +% One complication: _ usually means subscripts, but it could also mean +% an actual _ character, as in @math{@var{some_variable} + 1}. So make +% _ active, and distinguish by seeing if the current family is \slfam, +% which is what @var uses. +{ + \catcode`\_ = \active + \gdef\mathunderscore{% + \catcode`\_=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% + } +} +% Another complication: we want \\ (and @\) to output a math (or tt) \. +% FYI, plain.tex uses \\ as a temporary control sequence (for no +% particular reason), but this is not advertised and we don't care. +% +% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. +\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} +% +\def\math{% + \tex + \mathunderscore + \let\\ = \mathbackslash + \mathactive + % make the texinfo accent commands work in math mode + \let\"=\ddot + \let\'=\acute + \let\==\bar + \let\^=\hat + \let\`=\grave + \let\u=\breve + \let\v=\check + \let\~=\tilde + \let\dotaccent=\dot + % have to provide another name for sup operator + \let\mathopsup=\sup + $\finishmath +} +\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. + +% Some active characters (such as <) are spaced differently in math. +% We have to reset their definitions in case the @math was an argument +% to a command which sets the catcodes (such as @item or @section). +% +{ + \catcode`^ = \active + \catcode`< = \active + \catcode`> = \active + \catcode`+ = \active + \catcode`' = \active + \gdef\mathactive{% + \let^ = \ptexhat + \let< = \ptexless + \let> = \ptexgtr + \let+ = \ptexplus + \let' = \ptexquoteright + } +} + +% for @sub and @sup, if in math mode, just do a normal sub/superscript. +% If in text, use math to place as sub/superscript, but switch +% into text mode, with smaller fonts. This is a different font than the +% one used for real math sub/superscripts (8pt vs. 7pt), but let's not +% fix it (significant additions to font machinery) until someone notices. +% +\def\sub{\ifmmode \expandafter\sb \else \expandafter\finishsub\fi} +\def\finishsub#1{$\sb{\hbox{\selectfonts\lllsize #1}}$}% +% +\def\sup{\ifmmode \expandafter\ptexsp \else \expandafter\finishsup\fi} +\def\finishsup#1{$\ptexsp{\hbox{\selectfonts\lllsize #1}}$}% + +% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. +% Ignore unless FMTNAME == tex; then it is like @iftex and @tex, +% except specified as a normal braced arg, so no newlines to worry about. +% +\def\outfmtnametex{tex} +% +\long\def\inlinefmt#1{\doinlinefmt #1,\finish} +\long\def\doinlinefmt#1,#2,\finish{% + \def\inlinefmtname{#1}% + \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi +} +% +% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if +% FMTNAME is tex, else ELSE-TEXT. +\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish} +\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{% + \def\inlinefmtname{#1}% + \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi +} +% +% For raw, must switch into @tex before parsing the argument, to avoid +% setting catcodes prematurely. Doing it this way means that, for +% example, @inlineraw{html, foo{bar} gets a parse error instead of being +% ignored. But this isn't important because if people want a literal +% *right* brace they would have to use a command anyway, so they may as +% well use a command to get a left brace too. We could re-use the +% delimiter character idea from \verb, but it seems like overkill. +% +\long\def\inlineraw{\tex \doinlineraw} +\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish} +\def\doinlinerawtwo#1,#2,\finish{% + \def\inlinerawname{#1}% + \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi + \endgroup % close group opened by \tex. +} + +% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set. +% +\long\def\inlineifset#1{\doinlineifset #1,\finish} +\long\def\doinlineifset#1,#2,\finish{% + \def\inlinevarname{#1}% + \expandafter\ifx\csname SET\inlinevarname\endcsname\relax + \else\ignorespaces#2\fi +} + +% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set. +% +\long\def\inlineifclear#1{\doinlineifclear #1,\finish} +\long\def\doinlineifclear#1,#2,\finish{% + \def\inlinevarname{#1}% + \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi +} + + +\message{glyphs,} +% and logos. + +% @@ prints an @, as does @atchar{}. +\def\@{\char64 } +\let\atchar=\@ + +% @{ @} @lbracechar{} @rbracechar{} all generate brace characters. +% Unless we're in typewriter, use \ecfont because the CM text fonts do +% not have braces, and we don't want to switch into math. +\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}} +\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}} +\let\{=\mylbrace \let\lbracechar=\{ +\let\}=\myrbrace \let\rbracechar=\} +\begingroup + % Definitions to produce \{ and \} commands for indices, + % and @{ and @} for the aux/toc files. + \catcode`\{ = \other \catcode`\} = \other + \catcode`\[ = 1 \catcode`\] = 2 + \catcode`\! = 0 \catcode`\\ = \other + !gdef!lbracecmd[\{]% + !gdef!rbracecmd[\}]% + !gdef!lbraceatcmd[@{]% + !gdef!rbraceatcmd[@}]% +!endgroup + +% @comma{} to avoid , parsing problems. +\let\comma = , + +% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent +% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. +\let\, = \ptexc +\let\dotaccent = \ptexdot +\def\ringaccent#1{{\accent23 #1}} +\let\tieaccent = \ptext +\let\ubaraccent = \ptexb +\let\udotaccent = \d + +% Other special characters: @questiondown @exclamdown @ordf @ordm +% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. +\def\questiondown{?`} +\def\exclamdown{!`} +\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} +\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} + +% Dotless i and dotless j, used for accents. +\def\imacro{i} +\def\jmacro{j} +\def\dotless#1{% + \def\temp{#1}% + \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi + \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi + \else \errmessage{@dotless can be used only with i or j}% + \fi\fi +} + +% The \TeX{} logo, as in plain, but resetting the spacing so that a +% period following counts as ending a sentence. (Idea found in latex.) +% +\edef\TeX{\TeX \spacefactor=1000 } + +% @LaTeX{} logo. Not quite the same results as the definition in +% latex.ltx, since we use a different font for the raised A; it's most +% convenient for us to use an explicitly smaller font, rather than using +% the \scriptstyle font (since we don't reset \scriptstyle and +% \scriptscriptstyle). +% +\def\LaTeX{% + L\kern-.36em + {\setbox0=\hbox{T}% + \vbox to \ht0{\hbox{% + \ifx\textnominalsize\xwordpt + % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX. + % Revert to plain's \scriptsize, which is 7pt. + \count255=\the\fam $\fam\count255 \scriptstyle A$% + \else + % For 11pt, we can use our lllsize. + \selectfonts\lllsize A% + \fi + }% + \vss + }}% + \kern-.15em + \TeX +} + +% Some math mode symbols. Define \ensuremath to switch into math mode +% unless we are already there. Expansion tricks may not be needed here, +% but safer, and can't hurt. +\def\ensuremath{\ifmmode \expandafter\asis \else\expandafter\ensuredmath \fi} +\def\ensuredmath#1{$\relax#1$} +% +\def\bullet{\ensuremath\ptexbullet} +\def\geq{\ensuremath\ge} +\def\leq{\ensuremath\le} +\def\minus{\ensuremath-} + +% @dots{} outputs an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in the cm +% typewriter fonts as three actual period characters; on the other hand, +% in other typewriter fonts three periods are wider than 1.5em. So do +% whichever is larger. +% +\def\dots{% + \leavevmode + \setbox0=\hbox{...}% get width of three periods + \ifdim\wd0 > 1.5em + \dimen0 = \wd0 + \else + \dimen0 = 1.5em + \fi + \hbox to \dimen0{% + \hskip 0pt plus.25fil + .\hskip 0pt plus1fil + .\hskip 0pt plus1fil + .\hskip 0pt plus.5fil + }% +} + +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \dots + \spacefactor=\endofsentencespacefactor +} + +% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% +% Since these characters are used in examples, they should be an even number of +% \tt widths. Each \tt character is 1en, so two makes it 1em. +% +\def\point{$\star$} +\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}} +\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} +\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}} +\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} +\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}} + +% The @error{} command. +% Adapted from the TeXbook's \boxit. +% +\newbox\errorbox +% +{\tentt \global\dimen0 = 3em}% Width of the box. +\dimen2 = .55pt % Thickness of rules +% The text. (`r' is open on the right, `e' somewhat less so on the left.) +\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt} +% +\setbox\errorbox=\hbox to \dimen0{\hfil + \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. + \advance\hsize by -2\dimen2 % Rules. + \vbox{% + \hrule height\dimen2 + \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. + \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. + \kern3pt\vrule width\dimen2}% Space to right. + \hrule height\dimen2} + \hfil} +% +\def\error{\leavevmode\lower.7ex\copy\errorbox} + +% @pounds{} is a sterling sign, which Knuth put in the CM italic font. +% +\def\pounds{{\it\$}} + +% @euro{} comes from a separate font, depending on the current style. +% We use the free feym* fonts from the eurosym package by Henrik +% Theiling, which support regular, slanted, bold and bold slanted (and +% "outlined" (blackboard board, sort of) versions, which we don't need). +% It is available from http://www.ctan.org/tex-archive/fonts/eurosym. +% +% Although only regular is the truly official Euro symbol, we ignore +% that. The Euro is designed to be slightly taller than the regular +% font height. +% +% feymr - regular +% feymo - slanted +% feybr - bold +% feybo - bold slanted +% +% There is no good (free) typewriter version, to my knowledge. +% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. +% Hmm. +% +% Also doesn't work in math. Do we need to do math with euro symbols? +% Hope not. +% +% +\def\euro{{\eurofont e}} +\def\eurofont{% + % We set the font at each command, rather than predefining it in + % \textfonts and the other font-switching commands, so that + % installations which never need the symbol don't have to have the + % font installed. + % + % There is only one designed size (nominal 10pt), so we always scale + % that to the current nominal size. + % + % By the way, simply using "at 1em" works for cmr10 and the like, but + % does not work for cmbx10 and other extended/shrunken fonts. + % + \def\eurosize{\csname\curfontsize nominalsize\endcsname}% + % + \ifx\curfontstyle\bfstylename + % bold: + \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize + \else + % regular: + \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize + \fi + \thiseurofont +} + +% Glyphs from the EC fonts. We don't use \let for the aliases, because +% sometimes we redefine the original macro, and the alias should reflect +% the redefinition. +% +% Use LaTeX names for the Icelandic letters. +\def\DH{{\ecfont \char"D0}} % Eth +\def\dh{{\ecfont \char"F0}} % eth +\def\TH{{\ecfont \char"DE}} % Thorn +\def\th{{\ecfont \char"FE}} % thorn +% +\def\guillemetleft{{\ecfont \char"13}} +\def\guillemotleft{\guillemetleft} +\def\guillemetright{{\ecfont \char"14}} +\def\guillemotright{\guillemetright} +\def\guilsinglleft{{\ecfont \char"0E}} +\def\guilsinglright{{\ecfont \char"0F}} +\def\quotedblbase{{\ecfont \char"12}} +\def\quotesinglbase{{\ecfont \char"0D}} +% +% This positioning is not perfect (see the ogonek LaTeX package), but +% we have the precomposed glyphs for the most common cases. We put the +% tests to use those glyphs in the single \ogonek macro so we have fewer +% dummy definitions to worry about for index entries, etc. +% +% ogonek is also used with other letters in Lithuanian (IOU), but using +% the precomposed glyphs for those is not so easy since they aren't in +% the same EC font. +\def\ogonek#1{{% + \def\temp{#1}% + \ifx\temp\macrocharA\Aogonek + \else\ifx\temp\macrochara\aogonek + \else\ifx\temp\macrocharE\Eogonek + \else\ifx\temp\macrochare\eogonek + \else + \ecfont \setbox0=\hbox{#1}% + \ifdim\ht0=1ex\accent"0C #1% + \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}% + \fi + \fi\fi\fi\fi + }% +} +\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A} +\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a} +\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E} +\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e} +% +% Use the European Computer Modern fonts (cm-super in outline format) +% for non-CM glyphs. That is ec* for regular text and tc* for the text +% companion symbols (LaTeX TS1 encoding). Both are part of the ec +% package and follow the same conventions. +% +\def\ecfont{\etcfont{e}} +\def\tcfont{\etcfont{t}} +% +\def\etcfont#1{% + % We can't distinguish serif/sans and italic/slanted, but this + % is used for crude hacks anyway (like adding French and German + % quotes to documents typeset with CM, where we lose kerning), so + % hopefully nobody will notice/care. + \edef\ecsize{\csname\curfontsize ecsize\endcsname}% + \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% + \ifmonospace + % typewriter: + \font\thisecfont = #1ctt\ecsize \space at \nominalsize + \else + \ifx\curfontstyle\bfstylename + % bold: + \font\thisecfont = #1cb\ifusingit{i}{x}\ecsize \space at \nominalsize + \else + % regular: + \font\thisecfont = #1c\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \fi + \fi + \thisecfont +} + +% @registeredsymbol - R in a circle. The font for the R should really +% be smaller yet, but lllsize is the best we can do for now. +% Adapted from the plain.tex definition of \copyright. +% +\def\registeredsymbol{% + $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% + \hfil\crcr\Orb}}% + }$% +} + +% @textdegree - the normal degrees sign. +% +\def\textdegree{$^\circ$} + +% Laurent Siebenmann reports \Orb undefined with: +% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 +% so we'll define it if necessary. +% +\ifx\Orb\thisisundefined +\def\Orb{\mathhexbox20D} +\fi + +% Quotes. +\chardef\quotedblleft="5C +\chardef\quotedblright=`\" +\chardef\quoteleft=`\` +\chardef\quoteright=`\' + + +\message{page headings,} + +\newskip\titlepagetopglue \titlepagetopglue = 1.5in +\newskip\titlepagebottomglue \titlepagebottomglue = 2pc + +% First the title page. Must do @settitle before @titlepage. +\newif\ifseenauthor +\newif\iffinishedtitlepage + +% Do an implicit @contents or @shortcontents after @end titlepage if the +% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. +% +\newif\ifsetcontentsaftertitlepage + \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue +\newif\ifsetshortcontentsaftertitlepage + \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue + +\parseargdef\shorttitlepage{% + \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}% + \endgroup\page\hbox{}\page} + +\envdef\titlepage{% + % Open one extra group, as we want to close it in the middle of \Etitlepage. + \begingroup + \parindent=0pt \textfonts + % Leave some space at the very top of the page. + \vglue\titlepagetopglue + % No rule at page bottom unless we print one at the top with @title. + \finishedtitlepagetrue + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page + \def\page{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + \let\page = \oldpage + \page + \null + }% +} + +\def\Etitlepage{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + % It is important to do the page break before ending the group, + % because the headline and footline are only empty inside the group. + % If we use the new definition of \page, we always get a blank page + % after the title page, which we certainly don't want. + \oldpage + \endgroup + % + % Need this before the \...aftertitlepage checks so that if they are + % in effect the toc pages will come out with page numbers. + \HEADINGSon + % + % If they want short, they certainly want long too. + \ifsetshortcontentsaftertitlepage + \shortcontents + \contents + \global\let\shortcontents = \relax + \global\let\contents = \relax + \fi + % + \ifsetcontentsaftertitlepage + \contents + \global\let\contents = \relax + \global\let\shortcontents = \relax + \fi +} + +\def\finishtitlepage{% + \vskip4pt \hrule height 2pt width \hsize + \vskip\titlepagebottomglue + \finishedtitlepagetrue +} + +% Settings used for typesetting titles: no hyphenation, no indentation, +% don't worry much about spacing, ragged right. This should be used +% inside a \vbox, and fonts need to be set appropriately first. Because +% it is always used for titles, nothing else, we call \rmisbold. \par +% should be specified before the end of the \vbox, since a vbox is a group. +% +\def\raggedtitlesettings{% + \rmisbold + \hyphenpenalty=10000 + \parindent=0pt + \tolerance=5000 + \ptexraggedright +} + +% Macros to be used within @titlepage: + +\let\subtitlerm=\tenrm +\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} + +\parseargdef\title{% + \checkenv\titlepage + \vbox{\titlefonts \raggedtitlesettings #1\par}% + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt +} + +\parseargdef\subtitle{% + \checkenv\titlepage + {\subtitlefont \rightline{#1}}% +} + +% @author should come last, but may come many times. +% It can also be used inside @quotation. +% +\parseargdef\author{% + \def\temp{\quotation}% + \ifx\thisenv\temp + \def\quotationauthor{#1}% printed in \Equotation. + \else + \checkenv\titlepage + \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi + {\secfonts\rmisbold \leftline{#1}}% + \fi +} + + +% Set up page headings and footings. + +\let\thispage=\folio + +\newtoks\evenheadline % headline on even pages +\newtoks\oddheadline % headline on odd pages +\newtoks\evenfootline % footline on even pages +\newtoks\oddfootline % footline on odd pages + +% Now make \makeheadline and \makefootline in Plain TeX use those variables +\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline + \else \the\evenheadline \fi}} +\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline + \else \the\evenfootline \fi}\HEADINGShook} +\let\HEADINGShook=\relax + +% Commands to set those variables. +% For example, this is what @headings on does +% @evenheading @thistitle|@thispage|@thischapter +% @oddheading @thischapter|@thispage|@thistitle +% @evenfooting @thisfile|| +% @oddfooting ||@thisfile + + +\def\evenheading{\parsearg\evenheadingxxx} +\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} +\def\evenheadingyyy #1\|#2\|#3\|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\def\oddheading{\parsearg\oddheadingxxx} +\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} +\def\oddheadingyyy #1\|#2\|#3\|#4\finish{% +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% + +\def\evenfooting{\parsearg\evenfootingxxx} +\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} +\def\evenfootingyyy #1\|#2\|#3\|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\def\oddfooting{\parsearg\oddfootingxxx} +\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} +\def\oddfootingyyy #1\|#2\|#3\|#4\finish{% + \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% + % + % Leave some space for the footline. Hopefully ok to assume + % @evenfooting will not be used by itself. + \global\advance\pageheight by -12pt + \global\advance\vsize by -12pt +} + +\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} + +% @evenheadingmarks top \thischapter <- chapter at the top of a page +% @evenheadingmarks bottom \thischapter <- chapter at the bottom of a page +% +% The same set of arguments for: +% +% @oddheadingmarks +% @evenfootingmarks +% @oddfootingmarks +% @everyheadingmarks +% @everyfootingmarks + +% These define \getoddheadingmarks, \getevenheadingmarks, +% \getoddfootingmarks, and \getevenfootingmarks, each to one of +% \gettopheadingmarks, \getbottomheadingmarks. +% +\def\evenheadingmarks{\headingmarks{even}{heading}} +\def\oddheadingmarks{\headingmarks{odd}{heading}} +\def\evenfootingmarks{\headingmarks{even}{footing}} +\def\oddfootingmarks{\headingmarks{odd}{footing}} +\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1} + \headingmarks{odd}{heading}{#1} } +\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1} + \headingmarks{odd}{footing}{#1} } +% #1 = even/odd, #2 = heading/footing, #3 = top/bottom. +\def\headingmarks#1#2#3 {% + \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname + \global\expandafter\let\csname get#1#2marks\endcsname \temp +} + +\everyheadingmarks bottom +\everyfootingmarks bottom + +% @headings double turns headings on for double-sided printing. +% @headings single turns headings on for single-sided printing. +% @headings off turns them off. +% @headings on same as @headings double, retained for compatibility. +% @headings after turns on double-sided headings after this page. +% @headings doubleafter turns on double-sided headings after this page. +% @headings singleafter turns on single-sided headings after this page. +% By default, they are off at the start of a document, +% and turned `on' after @end titlepage. + +\def\headings #1 {\csname HEADINGS#1\endcsname} + +\def\headingsoff{% non-global headings elimination + \evenheadline={\hfil}\evenfootline={\hfil}% + \oddheadline={\hfil}\oddfootline={\hfil}% +} + +\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting +\HEADINGSoff % it's the default + +% When we turn headings on, set the page number to 1. +% For double-sided printing, put current file name in lower left corner, +% chapter name on inside top of right hand pages, document +% title on inside top of left hand pages, and page numbers on outside top +% edge of all pages. +\def\HEADINGSdouble{% +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapterheading\hfil\folio}} +\global\let\contentsalignmacro = \chapoddpage +} +\let\contentsalignmacro = \chappager + +% For single-sided printing, chapter title goes across top left of page, +% page number on top right. +\def\HEADINGSsingle{% +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapterheading\hfil\folio}} +\global\oddheadline={\line{\thischapterheading\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} +\def\HEADINGSon{\HEADINGSdouble} + +\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} +\let\HEADINGSdoubleafter=\HEADINGSafter +\def\HEADINGSdoublex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapterheading\hfil\folio}} +\global\let\contentsalignmacro = \chapoddpage +} + +\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} +\def\HEADINGSsinglex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapterheading\hfil\folio}} +\global\oddheadline={\line{\thischapterheading\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} + +% Subroutines used in generating headings +% This produces Day Month Year style of output. +% Only define if not already defined, in case a txi-??.tex file has set +% up a different format (e.g., txi-cs.tex does this). +\ifx\today\thisisundefined +\def\today{% + \number\day\space + \ifcase\month + \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr + \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug + \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec + \fi + \space\number\year} +\fi + +% @settitle line... specifies the title of the document, for headings. +% It generates no output of its own. +\def\thistitle{\putwordNoTitle} +\def\settitle{\parsearg{\gdef\thistitle}} + + +\message{tables,} +% Tables -- @table, @ftable, @vtable, @item(x). + +% default indentation of table text +\newdimen\tableindent \tableindent=.8in +% default indentation of @itemize and @enumerate text +\newdimen\itemindent \itemindent=.3in +% margin between end of table item and start of table text. +\newdimen\itemmargin \itemmargin=.1in + +% used internally for \itemindent minus \itemmargin +\newdimen\itemmax + +% Note @table, @ftable, and @vtable define @item, @itemx, etc., with +% these defs. +% They also define \itemindex +% to index the item name in whatever manner is desired (perhaps none). + +\newif\ifitemxneedsnegativevskip + +\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi} + +\def\internalBitem{\smallbreak \parsearg\itemzzz} +\def\internalBitemx{\itemxpar \parsearg\itemzzz} + +\def\itemzzz #1{\begingroup % + \advance\hsize by -\rightskip + \advance\hsize by -\tableindent + \setbox0=\hbox{\itemindicate{#1}}% + \itemindex{#1}% + \nobreak % This prevents a break before @itemx. + % + % If the item text does not fit in the space we have, put it on a line + % by itself, and do not allow a page break either before or after that + % line. We do not start a paragraph here because then if the next + % command is, e.g., @kindex, the whatsit would get put into the + % horizontal list on a line by itself, resulting in extra blank space. + \ifdim \wd0>\itemmax + % + % Make this a paragraph so we get the \parskip glue and wrapping, + % but leave it ragged-right. + \begingroup + \advance\leftskip by-\tableindent + \advance\hsize by\tableindent + \advance\rightskip by0pt plus1fil\relax + \leavevmode\unhbox0\par + \endgroup + % + % We're going to be starting a paragraph, but we don't want the + % \parskip glue -- logically it's part of the @item we just started. + \nobreak \vskip-\parskip + % + % Stop a page break at the \parskip glue coming up. However, if + % what follows is an environment such as @example, there will be no + % \parskip glue; then the negative vskip we just inserted would + % cause the example and the item to crash together. So we use this + % bizarre value of 10001 as a signal to \aboveenvbreak to insert + % \parskip glue after all. Section titles are handled this way also. + % + \penalty 10001 + \endgroup + \itemxneedsnegativevskipfalse + \else + % The item text fits into the space. Start a paragraph, so that the + % following text (if any) will end up on the same line. + \noindent + % Do this with kerns and \unhbox so that if there is a footnote in + % the item text, it can migrate to the main vertical list and + % eventually be printed. + \nobreak\kern-\tableindent + \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 + \unhbox0 + \nobreak\kern\dimen0 + \endgroup + \itemxneedsnegativevskiptrue + \fi +} + +\def\item{\errmessage{@item while not in a list environment}} +\def\itemx{\errmessage{@itemx while not in a list environment}} + +% @table, @ftable, @vtable. +\envdef\table{% + \let\itemindex\gobble + \tablecheck{table}% +} +\envdef\ftable{% + \def\itemindex ##1{\doind {fn}{\code{##1}}}% + \tablecheck{ftable}% +} +\envdef\vtable{% + \def\itemindex ##1{\doind {vr}{\code{##1}}}% + \tablecheck{vtable}% +} +\def\tablecheck#1{% + \ifnum \the\catcode`\^^M=\active + \endgroup + \errmessage{This command won't work in this context; perhaps the problem is + that we are \inenvironment\thisenv}% + \def\next{\doignore{#1}}% + \else + \let\next\tablex + \fi + \next +} +\def\tablex#1{% + \def\itemindicate{#1}% + \parsearg\tabley +} +\def\tabley#1{% + {% + \makevalueexpandable + \edef\temp{\noexpand\tablez #1\space\space\space}% + \expandafter + }\temp \endtablez +} +\def\tablez #1 #2 #3 #4\endtablez{% + \aboveenvbreak + \ifnum 0#1>0 \advance \leftskip by #1\mil \fi + \ifnum 0#2>0 \tableindent=#2\mil \fi + \ifnum 0#3>0 \advance \rightskip by #3\mil \fi + \itemmax=\tableindent + \advance \itemmax by -\itemmargin + \advance \leftskip by \tableindent + \exdentamount=\tableindent + \parindent = 0pt + \parskip = \smallskipamount + \ifdim \parskip=0pt \parskip=2pt \fi + \let\item = \internalBitem + \let\itemx = \internalBitemx +} +\def\Etable{\endgraf\afterenvbreak} +\let\Eftable\Etable +\let\Evtable\Etable +\let\Eitemize\Etable +\let\Eenumerate\Etable + +% This is the counter used by @enumerate, which is really @itemize + +\newcount \itemno + +\envdef\itemize{\parsearg\doitemize} + +\def\doitemize#1{% + \aboveenvbreak + \itemmax=\itemindent + \advance\itemmax by -\itemmargin + \advance\leftskip by \itemindent + \exdentamount=\itemindent + \parindent=0pt + \parskip=\smallskipamount + \ifdim\parskip=0pt \parskip=2pt \fi + % + % Try typesetting the item mark so that if the document erroneously says + % something like @itemize @samp (intending @table), there's an error + % right away at the @itemize. It's not the best error message in the + % world, but it's better than leaving it to the @item. This means if + % the user wants an empty mark, they have to say @w{} not just @w. + \def\itemcontents{#1}% + \setbox0 = \hbox{\itemcontents}% + % + % @itemize with no arg is equivalent to @itemize @bullet. + \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi + % + \let\item=\itemizeitem +} + +% Definition of @item while inside @itemize and @enumerate. +% +\def\itemizeitem{% + \advance\itemno by 1 % for enumerations + {\let\par=\endgraf \smallbreak}% reasonable place to break + {% + % If the document has an @itemize directly after a section title, a + % \nobreak will be last on the list, and \sectionheading will have + % done a \vskip-\parskip. In that case, we don't want to zero + % parskip, or the item text will crash with the heading. On the + % other hand, when there is normal text preceding the item (as there + % usually is), we do want to zero parskip, or there would be too much + % space. In that case, we won't have a \nobreak before. At least + % that's the theory. + \ifnum\lastpenalty<10000 \parskip=0in \fi + \noindent + \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% + % + \ifinner\else + \vadjust{\penalty 1200}% not good to break after first line of item. + \fi + % We can be in inner vertical mode in a footnote, although an + % @itemize looks awful there. + }% + \flushcr +} + +% \splitoff TOKENS\endmark defines \first to be the first token in +% TOKENS, and \rest to be the remainder. +% +\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% + +% Allow an optional argument of an uppercase letter, lowercase letter, +% or number, to specify the first label in the enumerated list. No +% argument is the same as `1'. +% +\envparseargdef\enumerate{\enumeratey #1 \endenumeratey} +\def\enumeratey #1 #2\endenumeratey{% + % If we were given no argument, pretend we were given `1'. + \def\thearg{#1}% + \ifx\thearg\empty \def\thearg{1}\fi + % + % Detect if the argument is a single token. If so, it might be a + % letter. Otherwise, the only valid thing it can be is a number. + % (We will always have one token, because of the test we just made. + % This is a good thing, since \splitoff doesn't work given nothing at + % all -- the first parameter is undelimited.) + \expandafter\splitoff\thearg\endmark + \ifx\rest\empty + % Only one token in the argument. It could still be anything. + % A ``lowercase letter'' is one whose \lccode is nonzero. + % An ``uppercase letter'' is one whose \lccode is both nonzero, and + % not equal to itself. + % Otherwise, we assume it's a number. + % + % We need the \relax at the end of the \ifnum lines to stop TeX from + % continuing to look for a . + % + \ifnum\lccode\expandafter`\thearg=0\relax + \numericenumerate % a number (we hope) + \else + % It's a letter. + \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax + \lowercaseenumerate % lowercase letter + \else + \uppercaseenumerate % uppercase letter + \fi + \fi + \else + % Multiple tokens in the argument. We hope it's a number. + \numericenumerate + \fi +} + +% An @enumerate whose labels are integers. The starting integer is +% given in \thearg. +% +\def\numericenumerate{% + \itemno = \thearg + \startenumeration{\the\itemno}% +} + +% The starting (lowercase) letter is in \thearg. +\def\lowercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more lowercase letters in @enumerate; get a bigger + alphabet}% + \fi + \char\lccode\itemno + }% +} + +% The starting (uppercase) letter is in \thearg. +\def\uppercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more uppercase letters in @enumerate; get a bigger + alphabet} + \fi + \char\uccode\itemno + }% +} + +% Call \doitemize, adding a period to the first argument and supplying the +% common last two arguments. Also subtract one from the initial value in +% \itemno, since @item increments \itemno. +% +\def\startenumeration#1{% + \advance\itemno by -1 + \doitemize{#1.}\flushcr +} + +% @alphaenumerate and @capsenumerate are abbreviations for giving an arg +% to @enumerate. +% +\def\alphaenumerate{\enumerate{a}} +\def\capsenumerate{\enumerate{A}} +\def\Ealphaenumerate{\Eenumerate} +\def\Ecapsenumerate{\Eenumerate} + + +% @multitable macros +% Amy Hendrickson, 8/18/94, 3/6/96 +% +% @multitable ... @end multitable will make as many columns as desired. +% Contents of each column will wrap at width given in preamble. Width +% can be specified either with sample text given in a template line, +% or in percent of \hsize, the current width of text on page. + +% Table can continue over pages but will only break between lines. + +% To make preamble: +% +% Either define widths of columns in terms of percent of \hsize: +% @multitable @columnfractions .25 .3 .45 +% @item ... +% +% Numbers following @columnfractions are the percent of the total +% current hsize to be used for each column. You may use as many +% columns as desired. + + +% Or use a template: +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item ... +% using the widest term desired in each column. + +% Each new table line starts with @item, each subsequent new column +% starts with @tab. Empty columns may be produced by supplying @tab's +% with nothing between them for as many times as empty columns are needed, +% ie, @tab@tab@tab will produce two empty columns. + +% @item, @tab do not need to be on their own lines, but it will not hurt +% if they are. + +% Sample multitable: + +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item first col stuff @tab second col stuff @tab third col +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff +% @tab Many paragraphs of text may be used in any column. +% +% They will wrap at the width determined by the template. +% @item@tab@tab This will be in third column. +% @end multitable + +% Default dimensions may be reset by user. +% @multitableparskip is vertical space between paragraphs in table. +% @multitableparindent is paragraph indent in table. +% @multitablecolmargin is horizontal space to be left between columns. +% @multitablelinespace is space to leave between table items, baseline +% to baseline. +% 0pt means it depends on current normal line spacing. +% +\newskip\multitableparskip +\newskip\multitableparindent +\newdimen\multitablecolspace +\newskip\multitablelinespace +\multitableparskip=0pt +\multitableparindent=6pt +\multitablecolspace=12pt +\multitablelinespace=0pt + +% Macros used to set up halign preamble: +% +\let\endsetuptable\relax +\def\xendsetuptable{\endsetuptable} +\let\columnfractions\relax +\def\xcolumnfractions{\columnfractions} +\newif\ifsetpercent + +% #1 is the @columnfraction, usually a decimal number like .5, but might +% be just 1. We just use it, whatever it is. +% +\def\pickupwholefraction#1 {% + \global\advance\colcount by 1 + \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% + \setuptable +} + +\newcount\colcount +\def\setuptable#1{% + \def\firstarg{#1}% + \ifx\firstarg\xendsetuptable + \let\go = \relax + \else + \ifx\firstarg\xcolumnfractions + \global\setpercenttrue + \else + \ifsetpercent + \let\go\pickupwholefraction + \else + \global\advance\colcount by 1 + \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a + % separator; typically that is always in the input, anyway. + \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% + \fi + \fi + \ifx\go\pickupwholefraction + % Put the argument back for the \pickupwholefraction call, so + % we'll always have a period there to be parsed. + \def\go{\pickupwholefraction#1}% + \else + \let\go = \setuptable + \fi% + \fi + \go +} + +% multitable-only commands. +% +% @headitem starts a heading row, which we typeset in bold. Assignments +% have to be global since we are inside the implicit group of an +% alignment entry. \everycr below resets \everytab so we don't have to +% undo it ourselves. +\def\headitemfont{\b}% for people to use in the template row; not changeable +\def\headitem{% + \checkenv\multitable + \crcr + \gdef\headitemcrhook{\nobreak}% attempt to avoid page break after headings + \global\everytab={\bf}% can't use \headitemfont since the parsing differs + \the\everytab % for the first item +}% +% +% default for tables with no headings. +\let\headitemcrhook=\relax +% +% A \tab used to include \hskip1sp. But then the space in a template +% line is not enough. That is bad. So let's go back to just `&' until +% we again encounter the problem the 1sp was intended to solve. +% --karl, nathan@acm.org, 20apr99. +\def\tab{\checkenv\multitable &\the\everytab}% + +% @multitable ... @end multitable definitions: +% +\newtoks\everytab % insert after every tab. +% +\envdef\multitable{% + \vskip\parskip + \startsavinginserts + % + % @item within a multitable starts a normal row. + % We use \def instead of \let so that if one of the multitable entries + % contains an @itemize, we don't choke on the \item (seen as \crcr aka + % \endtemplate) expanding \doitemize. + \def\item{\crcr}% + % + \tolerance=9500 + \hbadness=9500 + \setmultitablespacing + \parskip=\multitableparskip + \parindent=\multitableparindent + \overfullrule=0pt + \global\colcount=0 + % + \everycr = {% + \noalign{% + \global\everytab={}% Reset from possible headitem. + \global\colcount=0 % Reset the column counter. + % + % Check for saved footnotes, etc.: + \checkinserts + % + % Perhaps a \nobreak, then reset: + \headitemcrhook + \global\let\headitemcrhook=\relax + }% + }% + % + \parsearg\domultitable +} +\def\domultitable#1{% + % To parse everything between @multitable and @item: + \setuptable#1 \endsetuptable + % + % This preamble sets up a generic column definition, which will + % be used as many times as user calls for columns. + % \vtop will set a single line and will also let text wrap and + % continue for many paragraphs if desired. + \halign\bgroup &% + \global\advance\colcount by 1 + \multistrut + \vtop{% + % Use the current \colcount to find the correct column width: + \hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively + % marking characters. + \noindent\ignorespaces##\unskip\multistrut + }\cr +} +\def\Emultitable{% + \crcr + \egroup % end the \halign + \global\setpercentfalse +} + +\def\setmultitablespacing{% + \def\multistrut{\strut}% just use the standard line spacing + % + % Compute \multitablelinespace (if not defined by user) for use in + % \multitableparskip calculation. We used define \multistrut based on + % this, but (ironically) that caused the spacing to be off. + % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. +\ifdim\multitablelinespace=0pt +\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip +\global\advance\multitablelinespace by-\ht0 +\fi +% Test to see if parskip is larger than space between lines of +% table. If not, do nothing. +% If so, set to same dimension as multitablelinespace. +\ifdim\multitableparskip>\multitablelinespace +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller + % than skip between lines in the table. +\fi% +\ifdim\multitableparskip=0pt +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller + % than skip between lines in the table. +\fi} + + +\message{conditionals,} + +% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext, +% @ifnotxml always succeed. They currently do nothing; we don't +% attempt to check whether the conditionals are properly nested. But we +% have to remember that they are conditionals, so that @end doesn't +% attempt to close an environment group. +% +\def\makecond#1{% + \expandafter\let\csname #1\endcsname = \relax + \expandafter\let\csname iscond.#1\endcsname = 1 +} +\makecond{iftex} +\makecond{ifnotdocbook} +\makecond{ifnothtml} +\makecond{ifnotinfo} +\makecond{ifnotplaintext} +\makecond{ifnotxml} + +% Ignore @ignore, @ifhtml, @ifinfo, and the like. +% +\def\direntry{\doignore{direntry}} +\def\documentdescription{\doignore{documentdescription}} +\def\docbook{\doignore{docbook}} +\def\html{\doignore{html}} +\def\ifdocbook{\doignore{ifdocbook}} +\def\ifhtml{\doignore{ifhtml}} +\def\ifinfo{\doignore{ifinfo}} +\def\ifnottex{\doignore{ifnottex}} +\def\ifplaintext{\doignore{ifplaintext}} +\def\ifxml{\doignore{ifxml}} +\def\ignore{\doignore{ignore}} +\def\menu{\doignore{menu}} +\def\xml{\doignore{xml}} + +% Ignore text until a line `@end #1', keeping track of nested conditionals. +% +% A count to remember the depth of nesting. +\newcount\doignorecount + +\def\doignore#1{\begingroup + % Scan in ``verbatim'' mode: + \obeylines + \catcode`\@ = \other + \catcode`\{ = \other + \catcode`\} = \other + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \spaceisspace + % + % Count number of #1's that we've seen. + \doignorecount = 0 + % + % Swallow text until we reach the matching `@end #1'. + \dodoignore{#1}% +} + +{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. + \obeylines % + % + \gdef\dodoignore#1{% + % #1 contains the command name as a string, e.g., `ifinfo'. + % + % Define a command to find the next `@end #1'. + \long\def\doignoretext##1^^M@end #1{% + \doignoretextyyy##1^^M@#1\_STOP_}% + % + % And this command to find another #1 command, at the beginning of a + % line. (Otherwise, we would consider a line `@c @ifset', for + % example, to count as an @ifset for nesting.) + \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% + % + % And now expand that command. + \doignoretext ^^M% + }% +} + +\def\doignoreyyy#1{% + \def\temp{#1}% + \ifx\temp\empty % Nothing found. + \let\next\doignoretextzzz + \else % Found a nested condition, ... + \advance\doignorecount by 1 + \let\next\doignoretextyyy % ..., look for another. + % If we're here, #1 ends with ^^M\ifinfo (for example). + \fi + \next #1% the token \_STOP_ is present just after this macro. +} + +% We have to swallow the remaining "\_STOP_". +% +\def\doignoretextzzz#1{% + \ifnum\doignorecount = 0 % We have just found the outermost @end. + \let\next\enddoignore + \else % Still inside a nested condition. + \advance\doignorecount by -1 + \let\next\doignoretext % Look for the next @end. + \fi + \next +} + +% Finish off ignored text. +{ \obeylines% + % Ignore anything after the last `@end #1'; this matters in verbatim + % environments, where otherwise the newline after an ignored conditional + % would result in a blank line in the output. + \gdef\enddoignore#1^^M{\endgroup\ignorespaces}% +} + + +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. +% +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. +% We rely on the fact that \parsearg sets \catcode`\ =10. +% +\parseargdef\set{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + {% + \makevalueexpandable + \def\temp{#2}% + \edef\next{\gdef\makecsname{SET#1}}% + \ifx\temp\empty + \next{}% + \else + \setzzz#2\endsetzzz + \fi + }% +} +% Remove the trailing space \setxxx inserted. +\def\setzzz#1 \endsetzzz{\next{#1}} + +% @clear VAR clears (i.e., unsets) the variable VAR. +% +\parseargdef\clear{% + {% + \makevalueexpandable + \global\expandafter\let\csname SET#1\endcsname=\relax + }% +} + +% @value{foo} gets the text saved in variable foo. +\def\value{\begingroup\makevalueexpandable\valuexxx} +\def\valuexxx#1{\expandablevalue{#1}\endgroup} +{ + \catcode`\-=\active \catcode`\_=\active + % + \gdef\makevalueexpandable{% + \let\value = \expandablevalue + % We don't want these characters active, ... + \catcode`\-=\other \catcode`\_=\other + % ..., but we might end up with active ones in the argument if + % we're called from @code, as @code{@value{foo-bar_}}, though. + % So \let them to their normal equivalents. + \let-\normaldash \let_\normalunderscore + } +} + +% We have this subroutine so that we can handle at least some @value's +% properly in indexes (we call \makevalueexpandable in \indexdummies). +% The command has to be fully expandable (if the variable is set), since +% the result winds up in the index file. This means that if the +% variable's value contains other Texinfo commands, it's almost certain +% it will fail (although perhaps we could fix that with sufficient work +% to do a one-level expansion on the result, instead of complete). +% +% Unfortunately, this has the consequence that when _ is in the *value* +% of an @set, it does not print properly in the roman fonts (get the cmr +% dot accent at position 126 instead). No fix comes to mind, and it's +% been this way since 2003 or earlier, so just ignore it. +% +\def\expandablevalue#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + {[No value for ``#1'']}% + \message{Variable `#1', used in @value, is not set.}% + \else + \csname SET#1\endcsname + \fi +} + +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +% To get the special treatment we need for `@end ifset,' we call +% \makecond and then redefine. +% +\makecond{ifset} +\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} +\def\doifset#1#2{% + {% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname SET#2\endcsname\relax + #1% If not set, redefine \next. + \fi + \expandafter + }\next +} +\def\ifsetfail{\doignore{ifset}} + +% @ifclear VAR ... @end executes the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. +% +% The `\else' inside the `\doifset' parameter is a trick to reuse the +% above code: if the variable is not set, do nothing, if it is set, +% then redefine \next to \ifclearfail. +% +\makecond{ifclear} +\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} +\def\ifclearfail{\doignore{ifclear}} + +% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written +% without the @) is in fact defined. We can only feasibly check at the +% TeX level, so something like `mathcode' is going to considered +% defined even though it is not a Texinfo command. +% +\makecond{ifcommanddefined} +\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}} +% +\def\doifcmddefined#1#2{{% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname #2\endcsname\relax + #1% If not defined, \let\next as above. + \fi + \expandafter + }\next +} +\def\ifcmddefinedfail{\doignore{ifcommanddefined}} + +% @ifcommandnotdefined CMD ... handled similar to @ifclear above. +\makecond{ifcommandnotdefined} +\def\ifcommandnotdefined{% + \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}} +\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}} + +% Set the `txicommandconditionals' variable, so documents have a way to +% test if the @ifcommand...defined conditionals are available. +\set txicommandconditionals + +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory=\comment + +% @defininfoenclose. +\let\definfoenclose=\comment + + +\message{indexing,} +% Index generation facilities + +% Define \newwrite to be identical to plain tex's \newwrite +% except not \outer, so it can be used within macros and \if's. +\edef\newwrite{\makecsname{ptexnewwrite}} + +% \newindex {foo} defines an index named IX. +% It automatically defines \IXindex such that +% \IXindex ...rest of line... puts an entry in the index IX. +% It also defines \IXindfile to be the number of the output channel for +% the file that accumulates this index. The file's extension is IX. +% The name of an index should be no more than 2 characters long +% for the sake of vms. +% +\def\newindex#1{% + \expandafter\chardef\csname#1indfile\endcsname=0 + \expandafter\xdef\csname#1index\endcsname{% % Define @#1index + \noexpand\doindex{#1}} +} + +% @defindex foo == \newindex{foo} +% +\def\defindex{\parsearg\newindex} + +% Define @defcodeindex, like @defindex except put all entries in @code. +% +\def\defcodeindex{\parsearg\newcodeindex} +% +\def\newcodeindex#1{% + \expandafter\chardef\csname#1indfile\endcsname=0 + \expandafter\xdef\csname#1index\endcsname{% + \noexpand\docodeindex{#1}}% +} + +% The default indices: +\newindex{cp}% concepts, +\newcodeindex{fn}% functions, +\newcodeindex{vr}% variables, +\newcodeindex{tp}% types, +\newcodeindex{ky}% keys +\newcodeindex{pg}% and programs. + + +% @synindex foo bar makes index foo feed into index bar. +% Do this instead of @defindex foo if you don't want it as a separate index. +% +% @syncodeindex foo bar similar, but put all entries made for index foo +% inside @code. +% +\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}} +\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}} + +% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo), +% #3 the target index (bar). +\def\dosynindex#1#2#3{% + % Only do \closeout if we haven't already done it, else we'll end up + % closing the target index. + \expandafter \ifx\csname donesynindex#2\endcsname \relax + % The \closeout helps reduce unnecessary open files; the limit on the + % Acorn RISC OS is a mere 16 files. + \expandafter\closeout\csname#2indfile\endcsname + \expandafter\let\csname donesynindex#2\endcsname = 1 + \fi + % redefine \fooindfile: + \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname + \expandafter\let\csname#2indfile\endcsname=\temp + % redefine \fooindex: + \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}% +} + +% Define \doindex, the driver for all index macros. +% Argument #1 is generated by the calling \fooindex macro, +% and it the two-letter name of the index. + +\def\doindex#1{\edef\indexname{#1}\parsearg\doindexxxx} +\def\doindexxxx #1{\doind{\indexname}{#1}} + +% like the previous two, but they put @code around the argument. +\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx} +\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}} + +% Used when writing an index entry out to an index file, to prevent +% expansion of Texinfo commands that can appear in an index entry. +% +\def\indexdummies{% + \escapechar = `\\ % use backslash in output files. + \def\@{@}% change to @@ when we switch to @ as escape char in index files. + \def\ {\realbackslash\space }% + % + % Need these unexpandable (because we define \tt as a dummy) + % definitions when @{ or @} appear in index entry text. Also, more + % complicated, when \tex is in effect and \{ is a \delimiter again. + % We can't use \lbracecmd and \rbracecmd because texindex assumes + % braces and backslashes are used only as delimiters. Perhaps we + % should use @lbracechar and @rbracechar? + \def\{{{\tt\char123}}% + \def\}{{\tt\char125}}% + % + % Do the redefinitions. + \commondummies +} + +% For the aux and toc files, @ is the escape character. So we want to +% redefine everything using @ as the escape character (instead of +% \realbackslash, still used for index files). When everything uses @, +% this will be simpler. +% +\def\atdummies{% + \def\@{@@}% + \def\ {@ }% + \let\{ = \lbraceatcmd + \let\} = \rbraceatcmd + % + % Do the redefinitions. + \commondummies + \otherbackslash +} + +% Called from \indexdummies and \atdummies. +% +\def\commondummies{% + % \definedummyword defines \#1 as \string\#1\space, thus effectively + % preventing its expansion. This is used only for control words, + % not control letters, because the \space would be incorrect for + % control characters, but is needed to separate the control word + % from whatever follows. + % + % For control letters, we have \definedummyletter, which omits the + % space. + % + % These can be used both for control words that take an argument and + % those that do not. If it is followed by {arg} in the input, then + % that will dutifully get written to the index (or wherever). + % + \def\definedummyword ##1{\def##1{\string##1\space}}% + \def\definedummyletter##1{\def##1{\string##1}}% + \let\definedummyaccent\definedummyletter + % + \commondummiesnofonts + % + \definedummyletter\_% + \definedummyletter\-% + % + % Non-English letters. + \definedummyword\AA + \definedummyword\AE + \definedummyword\DH + \definedummyword\L + \definedummyword\O + \definedummyword\OE + \definedummyword\TH + \definedummyword\aa + \definedummyword\ae + \definedummyword\dh + \definedummyword\exclamdown + \definedummyword\l + \definedummyword\o + \definedummyword\oe + \definedummyword\ordf + \definedummyword\ordm + \definedummyword\questiondown + \definedummyword\ss + \definedummyword\th + % + % Although these internal commands shouldn't show up, sometimes they do. + \definedummyword\bf + \definedummyword\gtr + \definedummyword\hat + \definedummyword\less + \definedummyword\sf + \definedummyword\sl + \definedummyword\tclose + \definedummyword\tt + % + \definedummyword\LaTeX + \definedummyword\TeX + % + % Assorted special characters. + \definedummyword\arrow + \definedummyword\bullet + \definedummyword\comma + \definedummyword\copyright + \definedummyword\registeredsymbol + \definedummyword\dots + \definedummyword\enddots + \definedummyword\entrybreak + \definedummyword\equiv + \definedummyword\error + \definedummyword\euro + \definedummyword\expansion + \definedummyword\geq + \definedummyword\guillemetleft + \definedummyword\guillemetright + \definedummyword\guilsinglleft + \definedummyword\guilsinglright + \definedummyword\lbracechar + \definedummyword\leq + \definedummyword\mathopsup + \definedummyword\minus + \definedummyword\ogonek + \definedummyword\pounds + \definedummyword\point + \definedummyword\print + \definedummyword\quotedblbase + \definedummyword\quotedblleft + \definedummyword\quotedblright + \definedummyword\quoteleft + \definedummyword\quoteright + \definedummyword\quotesinglbase + \definedummyword\rbracechar + \definedummyword\result + \definedummyword\sub + \definedummyword\sup + \definedummyword\textdegree + % + % We want to disable all macros so that they are not expanded by \write. + \macrolist + % + \normalturnoffactive + % + % Handle some cases of @value -- where it does not contain any + % (non-fully-expandable) commands. + \makevalueexpandable +} + +% \commondummiesnofonts: common to \commondummies and \indexnofonts. +% Define \definedumyletter, \definedummyaccent and \definedummyword before +% using. +% +\def\commondummiesnofonts{% + % Control letters and accents. + \definedummyletter\!% + \definedummyaccent\"% + \definedummyaccent\'% + \definedummyletter\*% + \definedummyaccent\,% + \definedummyletter\.% + \definedummyletter\/% + \definedummyletter\:% + \definedummyaccent\=% + \definedummyletter\?% + \definedummyaccent\^% + \definedummyaccent\`% + \definedummyaccent\~% + \definedummyword\u + \definedummyword\v + \definedummyword\H + \definedummyword\dotaccent + \definedummyword\ogonek + \definedummyword\ringaccent + \definedummyword\tieaccent + \definedummyword\ubaraccent + \definedummyword\udotaccent + \definedummyword\dotless + % + % Texinfo font commands. + \definedummyword\b + \definedummyword\i + \definedummyword\r + \definedummyword\sansserif + \definedummyword\sc + \definedummyword\slanted + \definedummyword\t + % + % Commands that take arguments. + \definedummyword\abbr + \definedummyword\acronym + \definedummyword\anchor + \definedummyword\cite + \definedummyword\code + \definedummyword\command + \definedummyword\dfn + \definedummyword\dmn + \definedummyword\email + \definedummyword\emph + \definedummyword\env + \definedummyword\file + \definedummyword\image + \definedummyword\indicateurl + \definedummyword\inforef + \definedummyword\kbd + \definedummyword\key + \definedummyword\math + \definedummyword\option + \definedummyword\pxref + \definedummyword\ref + \definedummyword\samp + \definedummyword\strong + \definedummyword\tie + \definedummyword\U + \definedummyword\uref + \definedummyword\url + \definedummyword\var + \definedummyword\verb + \definedummyword\w + \definedummyword\xref +} + +% For testing: output @{ and @} in index sort strings as \{ and \}. +\newif\ifusebracesinindexes + +\let\indexlbrace\relax +\let\indexrbrace\relax + +{\catcode`\@=0 +\catcode`\\=13 + @gdef@backslashdisappear{@def\{}} +} + +{ +\catcode`\<=13 +\catcode`\-=13 +\catcode`\`=13 + \gdef\indexnonalnumdisappear{% + \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax\else + % @set txiindexlquoteignore makes us ignore left quotes in the sort term. + % (Introduced for FSFS 2nd ed.) + \let`=\empty + \fi + % + \expandafter\ifx\csname SETtxiindexbackslashignore\endcsname\relax\else + \backslashdisappear + \fi + % + \expandafter\ifx\csname SETtxiindexhyphenignore\endcsname\relax\else + \def-{}% + \fi + \expandafter\ifx\csname SETtxiindexlessthanignore\endcsname\relax\else + \def<{}% + \fi + \expandafter\ifx\csname SETtxiindexatsignignore\endcsname\relax\else + \def\@{}% + \fi + } + + \gdef\indexnonalnumreappear{% + \useindexbackslash + \let-\normaldash + \let<\normalless + \def\@{@}% + } +} + + +% \indexnofonts is used when outputting the strings to sort the index +% by, and when constructing control sequence names. It eliminates all +% control sequences and just writes whatever the best ASCII sort string +% would be for a given command (usually its argument). +% +\def\indexnofonts{% + % Accent commands should become @asis. + \def\definedummyaccent##1{\let##1\asis}% + % We can just ignore other control letters. + \def\definedummyletter##1{\let##1\empty}% + % All control words become @asis by default; overrides below. + \let\definedummyword\definedummyaccent + \commondummiesnofonts + % + % Don't no-op \tt, since it isn't a user-level command + % and is used in the definitions of the active chars like <, >, |, etc. + % Likewise with the other plain tex font commands. + %\let\tt=\asis + % + \def\ { }% + \def\@{@}% + \def\_{\normalunderscore}% + \def\-{}% @- shouldn't affect sorting + % + \def\lbracechar{{\indexlbrace}}% + \def\rbracechar{{\indexrbrace}}% + \let\{=\lbracechar + \let\}=\rbracechar + % + % + % Non-English letters. + \def\AA{AA}% + \def\AE{AE}% + \def\DH{DZZ}% + \def\L{L}% + \def\OE{OE}% + \def\O{O}% + \def\TH{TH}% + \def\aa{aa}% + \def\ae{ae}% + \def\dh{dzz}% + \def\exclamdown{!}% + \def\l{l}% + \def\oe{oe}% + \def\ordf{a}% + \def\ordm{o}% + \def\o{o}% + \def\questiondown{?}% + \def\ss{ss}% + \def\th{th}% + % + \def\LaTeX{LaTeX}% + \def\TeX{TeX}% + % + % Assorted special characters. + % (The following {} will end up in the sort string, but that's ok.) + \def\arrow{->}% + \def\bullet{bullet}% + \def\comma{,}% + \def\copyright{copyright}% + \def\dots{...}% + \def\enddots{...}% + \def\equiv{==}% + \def\error{error}% + \def\euro{euro}% + \def\expansion{==>}% + \def\geq{>=}% + \def\guillemetleft{<<}% + \def\guillemetright{>>}% + \def\guilsinglleft{<}% + \def\guilsinglright{>}% + \def\leq{<=}% + \def\minus{-}% + \def\point{.}% + \def\pounds{pounds}% + \def\print{-|}% + \def\quotedblbase{"}% + \def\quotedblleft{"}% + \def\quotedblright{"}% + \def\quoteleft{`}% + \def\quoteright{'}% + \def\quotesinglbase{,}% + \def\registeredsymbol{R}% + \def\result{=>}% + \def\textdegree{o}% + % + % We need to get rid of all macros, leaving only the arguments (if present). + % Of course this is not nearly correct, but it is the best we can do for now. + % makeinfo does not expand macros in the argument to @deffn, which ends up + % writing an index entry, and texindex isn't prepared for an index sort entry + % that starts with \. + % + % Since macro invocations are followed by braces, we can just redefine them + % to take a single TeX argument. The case of a macro invocation that + % goes to end-of-line is not handled. + % + \macrolist +} + + +\let\SETmarginindex=\relax % put index entries in margin (undocumented)? + +% Most index entries go through here, but \dosubind is the general case. +% #1 is the index name, #2 is the entry text. +\def\doind#1#2{\dosubind{#1}{#2}{}} + +% There is also \dosubind {index}{topic}{subtopic} +% which makes an entry in a two-level index such as the operation index. +% TODO: Two-level index? Operation index? + +% Workhorse for all indexes. +% #1 is name of index, #2 is stuff to put there, #3 is subentry -- +% empty if called from \doind, as we usually are (the main exception +% is with most defuns, which call us directly). +% +\def\dosubind#1#2#3{% + \iflinks + {% + \requireopenindexfile{#1}% + % Store the main index entry text (including the third arg). + \toks0 = {#2}% + % If third arg is present, precede it with a space. + \def\thirdarg{#3}% + \ifx\thirdarg\empty \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + \edef\writeto{\csname#1indfile\endcsname}% + % + \safewhatsit\dosubindwrite + }% + \fi +} + +% Check if an index file has been opened, and if not, open it. +\def\requireopenindexfile#1{% +\ifnum\csname #1indfile\endcsname=0 + \expandafter\newwrite \csname#1indfile\endcsname + \edef\suffix{#1}% + % A .fls suffix would conflict with the file extension for the output + % of -recorder, so use .f1s instead. + \ifx\suffix\indexisfl\def\suffix{f1}\fi + % Open the file + \immediate\openout\csname#1indfile\endcsname \jobname.\suffix + % Using \immediate here prevents an object entering into the current box, + % which could confound checks such as those in \safewhatsit for preceding + % skips. +\fi} +\def\indexisfl{fl} + +% Output \ as {\indexbackslash}, because \ is an escape character in +% the index files. +\let\indexbackslash=\relax +{\catcode`\@=0 \catcode`\\=\active + @gdef@useindexbackslash{@def\{{@indexbackslash}}} +} + +% Definition for writing index entry text. +\def\sortas#1{\ignorespaces}% + +% Definition for writing index entry sort key. Should occur at the at +% the beginning of the index entry, like +% @cindex @sortas{september} \september +% The \ignorespaces takes care of following space, but there's no way +% to remove space before it. +{ +\catcode`\-=13 +\gdef\indexwritesortas{% + \begingroup + \indexnonalnumreappear + \indexwritesortasxxx} +\gdef\indexwritesortasxxx#1{% + \xdef\indexsortkey{#1}\endgroup} +} + + +% Write the entry in \toks0 to the index file. +% +\def\dosubindwrite{% + % Put the index entry in the margin if desired. + \ifx\SETmarginindex\relax\else + \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% + \fi + % + % Remember, we are within a group. + \indexdummies % Must do this here, since \bf, etc expand at this stage + \useindexbackslash % \indexbackslash isn't defined now so it will be output + % as is; and it will print as backslash. + % Get the string to sort by, by processing the index entry with all + % font commands turned off. + {\indexnofonts + \indexnonalnumdisappear + \xdef\indexsortkey{}% + \let\sortas=\indexwritesortas + \edef\temp{\the\toks0}% + \setbox\dummybox = \hbox{\temp}% Make sure to execute any \sortas + \ifx\indexsortkey\empty + \xdef\indexsortkey{\temp}% + \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi + \fi + }% + % + % Set up the complete index entry, with both the sort key and + % the original text, including any font commands. We write + % three arguments to \entry to the .?? file (four in the + % subentry case), texindex reduces to two when writing the .??s + % sorted result. + \edef\temp{% + \write\writeto{% + \string\entry{\indexsortkey}{\noexpand\folio}{\the\toks0}}% + }% + \temp +} +\newbox\dummybox % used above + +% Take care of unwanted page breaks/skips around a whatsit: +% +% If a skip is the last thing on the list now, preserve it +% by backing up by \lastskip, doing the \write, then inserting +% the skip again. Otherwise, the whatsit generated by the +% \write or \pdfdest will make \lastskip zero. The result is that +% sequences like this: +% @end defun +% @tindex whatever +% @defun ... +% will have extra space inserted, because the \medbreak in the +% start of the @defun won't see the skip inserted by the @end of +% the previous defun. +% +% But don't do any of this if we're not in vertical mode. We +% don't want to do a \vskip and prematurely end a paragraph. +% +% Avoid page breaks due to these extra skips, too. +% +% But wait, there is a catch there: +% We'll have to check whether \lastskip is zero skip. \ifdim is not +% sufficient for this purpose, as it ignores stretch and shrink parts +% of the skip. The only way seems to be to check the textual +% representation of the skip. +% +% The following is almost like \def\zeroskipmacro{0.0pt} except that +% the ``p'' and ``t'' characters have catcode \other, not 11 (letter). +% +\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} +% +\newskip\whatsitskip +\newcount\whatsitpenalty +% +% ..., ready, GO: +% +\def\safewhatsit#1{\ifhmode + #1% + \else + % \lastskip and \lastpenalty cannot both be nonzero simultaneously. + \whatsitskip = \lastskip + \edef\lastskipmacro{\the\lastskip}% + \whatsitpenalty = \lastpenalty + % + % If \lastskip is nonzero, that means the last item was a + % skip. And since a skip is discardable, that means this + % -\whatsitskip glue we're inserting is preceded by a + % non-discardable item, therefore it is not a potential + % breakpoint, therefore no \nobreak needed. + \ifx\lastskipmacro\zeroskipmacro + \else + \vskip-\whatsitskip + \fi + % + #1% + % + \ifx\lastskipmacro\zeroskipmacro + % If \lastskip was zero, perhaps the last item was a penalty, and + % perhaps it was >=10000, e.g., a \nobreak. In that case, we want + % to re-insert the same penalty (values >10000 are used for various + % signals); since we just inserted a non-discardable item, any + % following glue (such as a \parskip) would be a breakpoint. For example: + % @deffn deffn-whatever + % @vindex index-whatever + % Description. + % would allow a break between the index-whatever whatsit + % and the "Description." paragraph. + \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi + \else + % On the other hand, if we had a nonzero \lastskip, + % this make-up glue would be preceded by a non-discardable item + % (the whatsit from the \write), so we must insert a \nobreak. + \nobreak\vskip\whatsitskip + \fi +\fi} + +% The index entry written in the file actually looks like +% \entry {sortstring}{page}{topic} +% or +% \entry {sortstring}{page}{topic}{subtopic} +% The texindex program reads in these files and writes files +% containing these kinds of lines: +% \initial {c} +% before the first topic whose initial is c +% \entry {topic}{pagelist} +% for a topic that is used without subtopics +% \primary {topic} +% for the beginning of a topic that is used with subtopics +% \secondary {subtopic}{pagelist} +% for each subtopic. + +% Define the user-accessible indexing commands +% @findex, @vindex, @kindex, @cindex. + +\def\findex {\fnindex} +\def\kindex {\kyindex} +\def\cindex {\cpindex} +\def\vindex {\vrindex} +\def\tindex {\tpindex} +\def\pindex {\pgindex} + +\def\cindexsub {\begingroup\obeylines\cindexsub} +{\obeylines % +\gdef\cindexsub "#1" #2^^M{\endgroup % +\dosubind{cp}{#2}{#1}}} + +% Define the macros used in formatting output of the sorted index material. + +% @printindex causes a particular index (the ??s file) to get printed. +% It does not print any chapter heading (usually an @unnumbered). +% +\parseargdef\printindex{\begingroup + \dobreak \chapheadingskip{10000}% + % + \smallfonts \rm + \tolerance = 9500 + \plainfrenchspacing + \everypar = {}% don't want the \kern\-parindent from indentation suppression. + % + % See if the index file exists and is nonempty. + % Change catcode of @ here so that if the index file contains + % \initial {@} + % as its first line, TeX doesn't complain about mismatched braces + % (because it thinks @} is a control sequence). + \catcode`\@ = 11 + % See comment in \requireopenindexfile. + \def\indexname{#1}\ifx\indexname\indexisfl\def\indexname{f1}\fi + \openin 1 \jobname.\indexname s + \ifeof 1 + % \enddoublecolumns gets confused if there is no text in the index, + % and it loses the chapter title and the aux file entries for the + % index. The easiest way to prevent this problem is to make sure + % there is some text. + \putwordIndexNonexistent + \else + \catcode`\\ = 0 + \escapechar = `\\ + % + % If the index file exists but is empty, then \openin leaves \ifeof + % false. We have to make TeX try to read something from the file, so + % it can discover if there is anything in it. + \read 1 to \thisline + \ifeof 1 + \putwordIndexIsEmpty + \else + % Index files are almost Texinfo source, but we use \ as the escape + % character. It would be better to use @, but that's too big a change + % to make right now. + \def\indexbackslash{\ttbackslash}% + \let\indexlbrace\{ % Likewise, set these sequences for braces + \let\indexrbrace\} % used in the sort key. + \begindoublecolumns + \let\entryorphanpenalty=\indexorphanpenalty + % + % Read input from the index file line by line. + \loopdo + \ifeof1 + \let\firsttoken\relax + \else + \read 1 to \nextline + \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}% + \act + \fi + \thisline + % + \ifeof1\else + \let\thisline\nextline + \repeat + %% + \enddoublecolumns + \fi + \fi + \closein 1 +\endgroup} + +\def\getfirsttoken#1{\expandafter\getfirsttokenx#1\endfirsttoken} +\long\def\getfirsttokenx#1#2\endfirsttoken{\noexpand#1} + +\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx} +\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next} + +% These macros are used by the sorted index file itself. +% Change them to control the appearance of the index. + +{\catcode`\/=13 \catcode`\-=13 \catcode`\^=13 \catcode`\~=13 \catcode`\_=13 +\catcode`\|=13 \catcode`\<=13 \catcode`\>=13 \catcode`\+=13 \catcode`\"=13 +\catcode`\$=3 +\gdef\initialglyphs{% + % Some changes for non-alphabetic characters. Using the glyphs from the + % math fonts looks more consistent than the typewriter font used elsewhere + % for these characters. + \def\indexbackslash{\math{\backslash}}% + \let\\=\indexbackslash + % + % Can't get bold backslash so don't use bold forward slash + \catcode`\/=13 + \def/{{\secrmnotbold \normalslash}}% + \def-{{\normaldash\normaldash}}% en dash `--' + \def^{{\chapbf \normalcaret}}% + \def~{{\chapbf \normaltilde}}% + \def\_{% + \leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }% + \def|{$\vert$}% + \def<{$\less$}% + \def>{$\gtr$}% + \def+{$\normalplus$}% +}} + +\def\initial{% + \bgroup + \initialglyphs + \initialx +} + +\def\initialx#1{% + % Remove any glue we may have, we'll be inserting our own. + \removelastskip + % + % We like breaks before the index initials, so insert a bonus. + % The glue before the bonus allows a little bit of space at the + % bottom of a column to reduce an increase in inter-line spacing. + \nobreak + \vskip 0pt plus 5\baselineskip + \penalty -300 + \vskip 0pt plus -5\baselineskip + % + % Typeset the initial. Making this add up to a whole number of + % baselineskips increases the chance of the dots lining up from column + % to column. It still won't often be perfect, because of the stretch + % we need before each entry, but it's better. + % + % No shrink because it confuses \balancecolumns. + \vskip 1.67\baselineskip plus 1\baselineskip + \leftline{\secfonts \kern-0.05em \secbf #1}% + % \secfonts is inside the argument of \leftline so that the change of + % \baselineskip will not affect any glue inserted before the vbox that + % \leftline creates. + % Do our best not to break after the initial. + \nobreak + \vskip .33\baselineskip plus .1\baselineskip + \egroup % \initialglyphs +} + +\newdimen\entryrightmargin +\entryrightmargin=0pt + +% \entry typesets a paragraph consisting of the text (#1), dot leaders, and +% then page number (#2) flushed to the right margin. It is used for index +% and table of contents entries. The paragraph is indented by \leftskip. +% +\def\entry{% + \begingroup + % + % Start a new paragraph if necessary, so our assignments below can't + % affect previous text. + \par + % + % No extra space above this paragraph. + \parskip = 0in + % + % When reading the text of entry, convert explicit line breaks + % from @* into spaces. The user might give these in long section + % titles, for instance. + \def\*{\unskip\space\ignorespaces}% + \def\entrybreak{\hfil\break}% An undocumented command + % + % A bit of stretch before each entry for the benefit of balancing + % columns. + \vskip 0pt plus0.5pt + % + % Swallow the left brace of the text (first parameter): + \afterassignment\doentry + \let\temp = +} +\def\entrybreak{\unskip\space\ignorespaces}% +\def\doentry{% + % Save the text of the entry + \global\setbox\boxA=\hbox\bgroup + \bgroup % Instead of the swallowed brace. + \noindent + \aftergroup\finishentry + % And now comes the text of the entry. + % Not absorbing as a macro argument reduces the chance of problems + % with catcodes occurring. +} +{\catcode`\@=11 +\gdef\finishentry#1{% + \egroup % end box A + \dimen@ = \wd\boxA % Length of text of entry + \global\setbox\boxA=\hbox\bgroup\unhbox\boxA + % #1 is the page number. + % + % Get the width of the page numbers, and only use + % leaders if they are present. + \global\setbox\boxB = \hbox{#1}% + \ifdim\wd\boxB = 0pt + \null\nobreak\hfill\ % + \else + % + \null\nobreak\indexdotfill % Have leaders before the page number. + % + \ifpdf + \pdfgettoks#1.% + \hskip\skip\thinshrinkable\the\toksA + \else + \hskip\skip\thinshrinkable #1% + \fi + \fi + \egroup % end \boxA + \ifdim\wd\boxB = 0pt + \global\setbox\entryindexbox=\box\boxA + \else + \global\setbox\entryindexbox=\vbox\bgroup\noindent + % We want the text of the entries to be aligned to the left, and the + % page numbers to be aligned to the right. + % + \advance\leftskip by 0pt plus 1fil + \advance\leftskip by 0pt plus -1fill + \rightskip = 0pt plus -1fil + \advance\rightskip by 0pt plus 1fill + % Cause last line, which could consist of page numbers on their own + % if the list of page numbers is long, to be aligned to the right. + \parfillskip=0pt plus -1fill + % + \hangindent=1em + % + \advance\rightskip by \entryrightmargin + % Determine how far we can stretch into the margin. + % This allows, e.g., "Appendix H GNU Free Documentation License" to + % fit on one line in @letterpaper format. + \ifdim\entryrightmargin>2.1em + \dimen@i=2.1em + \else + \dimen@i=0em + \fi + \advance \parfillskip by 0pt minus 1\dimen@i + % + \dimen@ii = \hsize + \advance\dimen@ii by -1\leftskip + \advance\dimen@ii by -1\entryrightmargin + \advance\dimen@ii by 1\dimen@i + \let\maybestrut=\relax + \ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line + \let\maybestrut=\strut + \ifdim\dimen@ > 0.8\dimen@ii % due to long index text + \dimen@ = 0.7\dimen@ % Try to split the text roughly evenly + \dimen@ii = \hsize + \advance \dimen@ii by -1em + \ifnum\dimen@>\dimen@ii + % If the entry is too long, use the whole line + \dimen@ = \dimen@ii + \fi + \advance\leftskip by 0pt plus 1fill % ragged right + \advance \dimen@ by 1\rightskip + \parshape = 2 0pt \dimen@ 1em \dimen@ii + % Ideally we'd add a finite glue at the end of the first line only, but + % TeX doesn't seem to provide a way to do such a thing. + \fi\fi + \maybestrut % Add a strut on the first and last lines + \unhbox\boxA + \maybestrut + % + % Do not prefer a separate line ending with a hyphen to fewer lines. + \finalhyphendemerits = 0 + % + % Word spacing - no stretch + \spaceskip=\fontdimen2\font minus \fontdimen4\font + % + \linepenalty=1000 % Discourage line breaks. + \hyphenpenalty=5000 % Discourage hyphenation. + % + \par % format the paragraph + \egroup % The \vbox + \fi + \endgroup + % delay text of entry until after penalty + \bgroup\aftergroup\insertindexentrybox + \entryorphanpenalty +}} + +\newskip\thinshrinkable +\skip\thinshrinkable=.15em minus .15em + +\newbox\entryindexbox +\def\insertindexentrybox{% +\lineskip=0pt % This comes into effect when the \vbox has a large + % height due to the paragraph in it having several + % lines. +\box\entryindexbox} + +% Default is no penalty +\let\entryorphanpenalty\egroup + +% Used from \printindex. \firsttoken should be the first token +% after the \entry. If it's not another \entry, we are at the last +% line of a group of index entries, so insert a penalty to discourage +% orphaned index entries. +\long\def\indexorphanpenalty{% + \def\isentry{\entry}% + \ifx\firsttoken\isentry + \else + \unskip\penalty 9000 + % The \unskip here stops breaking before the glue. It relies on the + % \vskip above being there, otherwise there is an error + % "You can't use `\unskip' in vertical mode". There has to be glue + % in the current vertical list that hasn't been added to the + % "current page". See Chapter 24 of the TeXbook. This contradicts + % Section 8.3.7 in "TeX by Topic," though. + \fi + \egroup % now comes the box added with \aftergroup +} + +% Like plain.tex's \dotfill, except uses up at least 1 em. +% The filll stretch here overpowers both the fil and fill stretch to push +% the page number to the right. +\def\indexdotfill{\cleaders + \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1filll} + + +\def\primary #1{\line{#1\hfil}} + +\newskip\secondaryindent \secondaryindent=0.5cm +\def\secondary#1#2{{% + \parfillskip=0in + \parskip=0in + \hangindent=1in + \hangafter=1 + \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill + \ifpdf + \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. + \else + #2 + \fi + \par +}} + +% Define two-column mode, which we use to typeset indexes. +% Adapted from the TeXbook, page 416, which is to say, +% the manmac.tex format used to print the TeXbook itself. +\catcode`\@=11 + +\newbox\partialpage +\newdimen\doublecolumnhsize +\newdimen\doublecolumntopgap +\doublecolumntopgap = 0pt + +\newtoks\savedtopmark % Used in \begindoublecolumns +\newtoks\savedfirstmark + +\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns + % Grab any single-column material above us. + \output = {% + % + % Here is a possibility not foreseen in manmac: if we accumulate a + % whole lot of material, we might end up calling this \output + % routine twice in a row (see the doublecol-lose test, which is + % essentially a couple of indexes with @setchapternewpage off). In + % that case we just ship out what is in \partialpage with the normal + % output routine. Generally, \partialpage will be empty when this + % runs and this will be a no-op. See the indexspread.tex test case. + \ifvoid\partialpage \else + \onepageout{\pagecontents\partialpage}% + \fi + % + \global\setbox\partialpage = \vbox{% + % Unvbox the main output page. + \unvbox\PAGE + \kern-\topskip \kern\baselineskip + }% + % Save \topmark and \firstmark + \global\savedtopmark=\expandafter{\topmark}% + \global\savedfirstmark=\expandafter{\firstmark}% + }% + \eject % run that output routine to set \partialpage + % + % We recover the two marks that the last output routine saved in order + % to propagate the information in marks added around a chapter heading, + % which could be otherwise be lost by the time the final page is output. + % + \mark{\the\savedtopmark}% Only mark in page passed to following \output. + \output = {% + \setbox0=\box\PAGE % clear box 255 + }abc\eject + % + \mark{\the\savedfirstmark}% + % + % Use the double-column output routine for subsequent pages. + \output = {\doublecolumnout}% + % + % Change the page size parameters. We could do this once outside this + % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 + % format, but then we repeat the same computation. Repeating a couple + % of assignments once per index is clearly meaningless for the + % execution time, so we may as well do it in one place. + % + % First we halve the line length, less a little for the gutter between + % the columns. We compute the gutter based on the line length, so it + % changes automatically with the paper format. The magic constant + % below is chosen so that the gutter has the same value (well, +-<1pt) + % as it did when we hard-coded it. + % + % We put the result in a separate register, \doublecolumhsize, so we + % can restore it in \pagesofar, after \hsize itself has (potentially) + % been clobbered. + % + \doublecolumnhsize = \hsize + \advance\doublecolumnhsize by -.04154\hsize + \divide\doublecolumnhsize by 2 + \hsize = \doublecolumnhsize + % + % Double the \vsize as well. (We don't need a separate register here, + % since nobody clobbers \vsize.) + \global\doublecolumntopgap = \topskip + \global\advance\doublecolumntopgap by -1\baselineskip + \global\advance\vsize by -1\doublecolumntopgap + \vsize = 2\vsize + \topskip=0pt +} + +% The double-column output routine for all double-column pages except +% the last, which is done by \balancecolumns. +% +\def\doublecolumnout{% + \splittopskip=\topskip \splitmaxdepth=\maxdepth + % Get the available space for the double columns -- the normal + % (undoubled) page height minus any material left over from the + % previous page. + \dimen@ = \vsize + \divide\dimen@ by 2 + \advance\dimen@ by -\ht\partialpage + % + % box0 will be the left-hand column, box2 the right. + \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ + \onepageout\pagesofar + \unvbox255 + \penalty\outputpenalty +} +% +% Re-output the contents of the output page -- any previous material, +% followed by the two boxes we just split, in box0 and box2. +\def\pagesofar{% + \unvbox\partialpage + % + \hsize = \doublecolumnhsize + \wd0=\hsize \wd2=\hsize + \vbox{% + \vskip\doublecolumntopgap + \hbox to\pagewidth{\box0\hfil\box2}}% +} + + +% Finished with with double columns. +\def\enddoublecolumns{% + % The following penalty ensures that the page builder is exercised + % _before_ we change the output routine. This is necessary in the + % following situation: + % + % The last section of the index consists only of a single entry. + % Before this section, \pagetotal is less than \pagegoal, so no + % break occurs before the last section starts. However, the last + % section, consisting of \initial and the single \entry, does not + % fit on the page and has to be broken off. Without the following + % penalty the page builder will not be exercised until \eject + % below, and by that time we'll already have changed the output + % routine to the \balancecolumns version, so the next-to-last + % double-column page will be processed with \balancecolumns, which + % is wrong: The two columns will go to the main vertical list, with + % the broken-off section in the recent contributions. As soon as + % the output routine finishes, TeX starts reconsidering the page + % break. The two columns and the broken-off section both fit on the + % page, because the two columns now take up only half of the page + % goal. When TeX sees \eject from below which follows the final + % section, it invokes the new output routine that we've set after + % \balancecolumns below; \onepageout will try to fit the two columns + % and the final section into the vbox of \pageheight (see + % \pagebody), causing an overfull box. + % + % Note that glue won't work here, because glue does not exercise the + % page builder, unlike penalties (see The TeXbook, pp. 280-281). + \penalty0 + % + \output = {% + % Split the last of the double-column material. Leave it on the + % current page, no automatic page break. + \balancecolumns + % + % If we end up splitting too much material for the current page, + % though, there will be another page break right after this \output + % invocation ends. Having called \balancecolumns once, we do not + % want to call it again. Therefore, reset \output to its normal + % definition right away. (We hope \balancecolumns will never be + % called on to balance too much material, but if it is, this makes + % the output somewhat more palatable.) + \global\output = {\onepageout{\pagecontents\PAGE}}% + }% + \eject + \endgroup % started in \begindoublecolumns + % + % \pagegoal was set to the doubled \vsize above, since we restarted + % the current page. We're now back to normal single-column + % typesetting, so reset \pagegoal to the normal \vsize (after the + % \endgroup where \vsize got restored). + \pagegoal = \vsize +} +% +% Only called for the last of the double column material. \doublecolumnout +% does the others. +\def\balancecolumns{% + \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. + \dimen@ = \ht0 + \advance\dimen@ by \topskip + \advance\dimen@ by-\baselineskip + \ifdim\dimen@<14\baselineskip + % Don't split a short final column in two. + \setbox2=\vbox{}% + \else + \divide\dimen@ by 2 % target to split to + \dimen@ii = \dimen@ + \splittopskip = \topskip + % Loop until the second column is no higher than the first + {% + \vbadness = 10000 + \loop + \global\setbox3 = \copy0 + \global\setbox1 = \vsplit3 to \dimen@ + % Remove glue from bottom of first column to + % make sure it is higher than the second. + \global\setbox1 = \vbox{\unvbox1\unpenalty\unskip}% + \ifdim\ht3>\ht1 + \global\advance\dimen@ by 1pt + \repeat + }% + \multiply\dimen@ii by 4 + \divide\dimen@ii by 5 + \ifdim\ht3<\dimen@ii + % Column heights are too different, so don't make their bottoms + % flush with each other. The glue at the end of the second column + % allows a second column to stretch, reducing the difference in + % height between the two. + \setbox0=\vbox to\dimen@{\unvbox1\vfill}% + \setbox2=\vbox to\dimen@{\unvbox3\vskip 0pt plus 0.3\ht0}% + \else + \setbox0=\vbox to\dimen@{\unvbox1}% + \setbox2=\vbox to\dimen@{\unvbox3}% + \fi + \fi + % + \pagesofar +} +\catcode`\@ = \other + + +\message{sectioning,} +% Chapters, sections, etc. + +% Let's start with @part. +\outer\parseargdef\part{\partzzz{#1}} +\def\partzzz#1{% + \chapoddpage + \null + \vskip.3\vsize % move it down on the page a bit + \begingroup + \noindent \titlefonts\rmisbold #1\par % the text + \let\lastnode=\empty % no node to associate with + \writetocentry{part}{#1}{}% but put it in the toc + \headingsoff % no headline or footline on the part page + % This outputs a mark at the end of the page that clears \thischapter + % and \thissection, as is done in \startcontents. + \let\pchapsepmacro\relax + \chapmacro{}{Yomitfromtoc}{}% + \chapoddpage + \endgroup +} + +% \unnumberedno is an oxymoron. But we count the unnumbered +% sections so that we can refer to them unambiguously in the pdf +% outlines by their "section number". We avoid collisions with chapter +% numbers by starting them at 10000. (If a document ever has 10000 +% chapters, we're in trouble anyway, I'm sure.) +\newcount\unnumberedno \unnumberedno = 10000 +\newcount\chapno +\newcount\secno \secno=0 +\newcount\subsecno \subsecno=0 +\newcount\subsubsecno \subsubsecno=0 + +% This counter is funny since it counts through charcodes of letters A, B, ... +\newcount\appendixno \appendixno = `\@ +% +% \def\appendixletter{\char\the\appendixno} +% We do the following ugly conditional instead of the above simple +% construct for the sake of pdftex, which needs the actual +% letter in the expansion, not just typeset. +% +\def\appendixletter{% + \ifnum\appendixno=`A A% + \else\ifnum\appendixno=`B B% + \else\ifnum\appendixno=`C C% + \else\ifnum\appendixno=`D D% + \else\ifnum\appendixno=`E E% + \else\ifnum\appendixno=`F F% + \else\ifnum\appendixno=`G G% + \else\ifnum\appendixno=`H H% + \else\ifnum\appendixno=`I I% + \else\ifnum\appendixno=`J J% + \else\ifnum\appendixno=`K K% + \else\ifnum\appendixno=`L L% + \else\ifnum\appendixno=`M M% + \else\ifnum\appendixno=`N N% + \else\ifnum\appendixno=`O O% + \else\ifnum\appendixno=`P P% + \else\ifnum\appendixno=`Q Q% + \else\ifnum\appendixno=`R R% + \else\ifnum\appendixno=`S S% + \else\ifnum\appendixno=`T T% + \else\ifnum\appendixno=`U U% + \else\ifnum\appendixno=`V V% + \else\ifnum\appendixno=`W W% + \else\ifnum\appendixno=`X X% + \else\ifnum\appendixno=`Y Y% + \else\ifnum\appendixno=`Z Z% + % The \the is necessary, despite appearances, because \appendixletter is + % expanded while writing the .toc file. \char\appendixno is not + % expandable, thus it is written literally, thus all appendixes come out + % with the same letter (or @) in the toc without it. + \else\char\the\appendixno + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} + +% Each @chapter defines these (using marks) as the number+name, number +% and name of the chapter. Page headings and footings can use +% these. @section does likewise. +\def\thischapter{} +\def\thischapternum{} +\def\thischaptername{} +\def\thissection{} +\def\thissectionnum{} +\def\thissectionname{} + +\newcount\absseclevel % used to calculate proper heading level +\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count + +% @raisesections: treat @section as chapter, @subsection as section, etc. +\def\raisesections{\global\advance\secbase by -1} +\let\up=\raisesections % original BFox name + +% @lowersections: treat @chapter as section, @section as subsection, etc. +\def\lowersections{\global\advance\secbase by 1} +\let\down=\lowersections % original BFox name + +% we only have subsub. +\chardef\maxseclevel = 3 +% +% A numbered section within an unnumbered changes to unnumbered too. +% To achieve this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unnlevel = \maxseclevel +% +% Trace whether the current chapter is an appendix or not: +% \chapheadtype is "N" or "A", unnumbered chapters are ignored. +\def\chapheadtype{N} + +% Choose a heading macro +% #1 is heading type +% #2 is heading level +% #3 is text for heading +\def\genhead#1#2#3{% + % Compute the abs. sec. level: + \absseclevel=#2 + \advance\absseclevel by \secbase + % Make sure \absseclevel doesn't fall outside the range: + \ifnum \absseclevel < 0 + \absseclevel = 0 + \else + \ifnum \absseclevel > 3 + \absseclevel = 3 + \fi + \fi + % The heading type: + \def\headtype{#1}% + \if \headtype U% + \ifnum \absseclevel < \unnlevel + \chardef\unnlevel = \absseclevel + \fi + \else + % Check for appendix sections: + \ifnum \absseclevel = 0 + \edef\chapheadtype{\headtype}% + \else + \if \headtype A\if \chapheadtype N% + \errmessage{@appendix... within a non-appendix chapter}% + \fi\fi + \fi + % Check for numbered within unnumbered: + \ifnum \absseclevel > \unnlevel + \def\headtype{U}% + \else + \chardef\unnlevel = 3 + \fi + \fi + % Now print the heading: + \if \headtype U% + \ifcase\absseclevel + \unnumberedzzz{#3}% + \or \unnumberedseczzz{#3}% + \or \unnumberedsubseczzz{#3}% + \or \unnumberedsubsubseczzz{#3}% + \fi + \else + \if \headtype A% + \ifcase\absseclevel + \appendixzzz{#3}% + \or \appendixsectionzzz{#3}% + \or \appendixsubseczzz{#3}% + \or \appendixsubsubseczzz{#3}% + \fi + \else + \ifcase\absseclevel + \chapterzzz{#3}% + \or \seczzz{#3}% + \or \numberedsubseczzz{#3}% + \or \numberedsubsubseczzz{#3}% + \fi + \fi + \fi + \suppressfirstparagraphindent +} + +% an interface: +\def\numhead{\genhead N} +\def\apphead{\genhead A} +\def\unnmhead{\genhead U} + +% @chapter, @appendix, @unnumbered. Increment top-level counter, reset +% all lower-level sectioning counters to zero. +% +% Also set \chaplevelprefix, which we prepend to @float sequence numbers +% (e.g., figures), q.v. By default (before any chapter), that is empty. +\let\chaplevelprefix = \empty +% +\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz +\def\chapterzzz#1{% + % section resetting is \global in case the chapter is in a group, such + % as an @include file. + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\chapno by 1 + % + % Used for \float. + \gdef\chaplevelprefix{\the\chapno.}% + \resetallfloatnos + % + % \putwordChapter can contain complex things in translations. + \toks0=\expandafter{\putwordChapter}% + \message{\the\toks0 \space \the\chapno}% + % + % Write the actual heading. + \chapmacro{#1}{Ynumbered}{\the\chapno}% + % + % So @section and the like are numbered underneath this chapter. + \global\let\section = \numberedsec + \global\let\subsection = \numberedsubsec + \global\let\subsubsection = \numberedsubsubsec +} + +\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz +% +\def\appendixzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\appendixno by 1 + \gdef\chaplevelprefix{\appendixletter.}% + \resetallfloatnos + % + % \putwordAppendix can contain complex things in translations. + \toks0=\expandafter{\putwordAppendix}% + \message{\the\toks0 \space \appendixletter}% + % + \chapmacro{#1}{Yappendix}{\appendixletter}% + % + \global\let\section = \appendixsec + \global\let\subsection = \appendixsubsec + \global\let\subsubsection = \appendixsubsubsec +} + +% normally unnmhead0 calls unnumberedzzz: +\outer\parseargdef\unnumbered{\unnmhead0{#1}} +\def\unnumberedzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\unnumberedno by 1 + % + % Since an unnumbered has no number, no prefix for figures. + \global\let\chaplevelprefix = \empty + \resetallfloatnos + % + % This used to be simply \message{#1}, but TeX fully expands the + % argument to \message. Therefore, if #1 contained @-commands, TeX + % expanded them. For example, in `@unnumbered The @cite{Book}', TeX + % expanded @cite (which turns out to cause errors because \cite is meant + % to be executed, not expanded). + % + % Anyway, we don't want the fully-expanded definition of @cite to appear + % as a result of the \message, we just want `@cite' itself. We use + % \the to achieve this: TeX expands \the only once, + % simply yielding the contents of . (We also do this for + % the toc entries.) + \toks0 = {#1}% + \message{(\the\toks0)}% + % + \chapmacro{#1}{Ynothing}{\the\unnumberedno}% + % + \global\let\section = \unnumberedsec + \global\let\subsection = \unnumberedsubsec + \global\let\subsubsection = \unnumberedsubsubsec +} + +% @centerchap is like @unnumbered, but the heading is centered. +\outer\parseargdef\centerchap{% + \let\centerparametersmaybe = \centerparameters + \unnmhead0{#1}% + \let\centerparametersmaybe = \relax +} + +% @top is like @unnumbered. +\let\top\unnumbered + +% Sections. +% +\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz +\def\seczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% +} + +% normally calls appendixsectionzzz: +\outer\parseargdef\appendixsection{\apphead1{#1}} +\def\appendixsectionzzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% +} +\let\appendixsec\appendixsection + +% normally calls unnumberedseczzz: +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} +\def\unnumberedseczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% +} + +% Subsections. +% +% normally calls numberedsubseczzz: +\outer\parseargdef\numberedsubsec{\numhead2{#1}} +\def\numberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% +} + +% normally calls appendixsubseczzz: +\outer\parseargdef\appendixsubsec{\apphead2{#1}} +\def\appendixsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno}% +} + +% normally calls unnumberedsubseczzz: +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} +\def\unnumberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno}% +} + +% Subsubsections. +% +% normally numberedsubsubseczzz: +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} +\def\numberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynumbered}% + {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +% normally appendixsubsubseczzz: +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} +\def\appendixsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +% normally unnumberedsubsubseczzz: +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} +\def\unnumberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +% These macros control what the section commands do, according +% to what kind of chapter we are in (ordinary, appendix, or unnumbered). +% Define them by default for a numbered chapter. +\let\section = \numberedsec +\let\subsection = \numberedsubsec +\let\subsubsection = \numberedsubsubsec + +% Define @majorheading, @heading and @subheading + +\def\majorheading{% + {\advance\chapheadingskip by 10pt \chapbreak }% + \parsearg\chapheadingzzz +} + +\def\chapheading{\chapbreak \parsearg\chapheadingzzz} +\def\chapheadingzzz#1{% + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip \nobreak + \suppressfirstparagraphindent +} + +% @heading, @subheading, @subsubheading. +\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} + +% These macros generate a chapter, section, etc. heading only +% (including whitespace, linebreaking, etc. around it), +% given all the information in convenient, parsed form. + +% Args are the skip and penalty (usually negative) +\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} + +% Parameter controlling skip before chapter headings (if needed) +\newskip\chapheadingskip + +% Define plain chapter starts, and page on/off switching for it. +\def\chapbreak{\dobreak \chapheadingskip {-4000}} + +% Start a new page +\def\chappager{\par\vfill\supereject} + +% \chapoddpage - start on an odd page for a new chapter +% Because \domark is called before \chapoddpage, the filler page will +% get the headings for the next chapter, which is wrong. But we don't +% care -- we just disable all headings on the filler page. +\def\chapoddpage{% + \chappager + \ifodd\pageno \else + \begingroup + \headingsoff + \null + \chappager + \endgroup + \fi +} + +\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} + +\def\CHAPPAGoff{% +\global\let\contentsalignmacro = \chappager +\global\let\pchapsepmacro=\chapbreak +\global\let\pagealignmacro=\chappager} + +\def\CHAPPAGon{% +\global\let\contentsalignmacro = \chappager +\global\let\pchapsepmacro=\chappager +\global\let\pagealignmacro=\chappager +\global\def\HEADINGSon{\HEADINGSsingle}} + +\def\CHAPPAGodd{% +\global\let\contentsalignmacro = \chapoddpage +\global\let\pchapsepmacro=\chapoddpage +\global\let\pagealignmacro=\chapoddpage +\global\def\HEADINGSon{\HEADINGSdouble}} + +\CHAPPAGon + +% \chapmacro - Chapter opening. +% +% #1 is the text, #2 is the section type (Ynumbered, Ynothing, +% Yappendix, Yomitfromtoc), #3 the chapter number. +% Not used for @heading series. +% +% To test against our argument. +\def\Ynothingkeyword{Ynothing} +\def\Yappendixkeyword{Yappendix} +\def\Yomitfromtockeyword{Yomitfromtoc} +% +\def\chapmacro#1#2#3{% + \checkenv{}% chapters, etc., should not start inside an environment. + % + % Insert the first mark before the heading break (see notes for \domark). + \let\prevchapterdefs=\lastchapterdefs + \let\prevsectiondefs=\lastsectiondefs + \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}% + \gdef\thissection{}}% + % + \def\temptype{#2}% + \ifx\temptype\Ynothingkeyword + \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\thischapter{\thischaptername}}% + \else\ifx\temptype\Yomitfromtockeyword + \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\thischapter{}}% + \else\ifx\temptype\Yappendixkeyword + \toks0={#1}% + \xdef\lastchapterdefs{% + \gdef\noexpand\thischaptername{\the\toks0}% + \gdef\noexpand\thischapternum{\appendixletter}% + % \noexpand\putwordAppendix avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordAppendix{} + \noexpand\thischapternum: + \noexpand\thischaptername}% + }% + \else + \toks0={#1}% + \xdef\lastchapterdefs{% + \gdef\noexpand\thischaptername{\the\toks0}% + \gdef\noexpand\thischapternum{\the\chapno}% + % \noexpand\putwordChapter avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordChapter{} + \noexpand\thischapternum: + \noexpand\thischaptername}% + }% + \fi\fi\fi + % + % Output the mark. Pass it through \safewhatsit, to take care of + % the preceding space. + \safewhatsit\domark + % + % Insert the chapter heading break. + \pchapsepmacro + % + % Now the second mark, after the heading break. No break points + % between here and the heading. + \let\prevchapterdefs=\lastchapterdefs + \let\prevsectiondefs=\lastsectiondefs + \domark + % + {% + \chapfonts \rmisbold + \let\footnote=\errfootnoteheading % give better error message + % + % Have to define \lastsection before calling \donoderef, because the + % xref code eventually uses it. On the other hand, it has to be called + % after \pchapsepmacro, or the headline will change too soon. + \gdef\lastsection{#1}% + % + % Only insert the separating space if we have a chapter/appendix + % number, and don't print the unnumbered ``number''. + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unnchap}% + \else\ifx\temptype\Yomitfromtockeyword + \setbox0 = \hbox{}% contents like unnumbered, but no toc entry + \def\toctype{omit}% + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% + \def\toctype{app}% + \else + \setbox0 = \hbox{#3\enspace}% + \def\toctype{numchap}% + \fi\fi\fi + % + % Write the toc entry for this chapter. Must come before the + % \donoderef, because we include the current node name in the toc + % entry, and \donoderef resets it to empty. + \writetocentry{\toctype}{#1}{#3}% + % + % For pdftex, we have to write out the node definition (aka, make + % the pdfdest) after any page break, but before the actual text has + % been typeset. If the destination for the pdf outline is after the + % text, then jumping from the outline may wind up with the text not + % being visible, for instance under high magnification. + \donoderef{#2}% + % + % Typeset the actual heading. + \nobreak % Avoid page breaks at the interline glue. + \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe + \unhbox0 #1\par}% + }% + \nobreak\bigskip % no page break after a chapter title + \nobreak +} + +% @centerchap -- centered and unnumbered. +\let\centerparametersmaybe = \relax +\def\centerparameters{% + \advance\rightskip by 3\rightskip + \leftskip = \rightskip + \parfillskip = 0pt +} + + +% I don't think this chapter style is supported any more, so I'm not +% updating it with the new noderef stuff. We'll see. --karl, 11aug03. +% +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} +% +\def\unnchfopen #1{% + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip\nobreak +} +\def\chfopen #1#2{\chapoddpage {\chapfonts +\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% +\par\penalty 5000 % +} +\def\centerchfopen #1{% + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}% + \nobreak\bigskip \nobreak +} +\def\CHAPFopen{% + \global\let\chapmacro=\chfopen + \global\let\centerchapmacro=\centerchfopen} + + +% Section titles. These macros combine the section number parts and +% call the generic \sectionheading to do the printing. +% +\newskip\secheadingskip +\def\secheadingbreak{\dobreak \secheadingskip{-1000}} + +% Subsection titles. +\newskip\subsecheadingskip +\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}} + +% Subsubsection titles. +\def\subsubsecheadingskip{\subsecheadingskip} +\def\subsubsecheadingbreak{\subsecheadingbreak} + + +% Print any size, any type, section title. +% +% #1 is the text of the title, +% #2 is the section level (sec/subsec/subsubsec), +% #3 is the section type (Ynumbered, Ynothing, Yappendix, Yomitfromtoc), +% #4 is the section number. +% +\def\seckeyword{sec} +% +\def\sectionheading#1#2#3#4{% + {% + \def\sectionlevel{#2}% + \def\temptype{#3}% + % + % It is ok for the @heading series commands to appear inside an + % environment (it's been historically allowed, though the logic is + % dubious), but not the others. + \ifx\temptype\Yomitfromtockeyword\else + \checkenv{}% non-@*heading should not be in an environment. + \fi + \let\footnote=\errfootnoteheading + % + % Switch to the right set of fonts. + \csname #2fonts\endcsname \rmisbold + % + % Insert first mark before the heading break (see notes for \domark). + \let\prevsectiondefs=\lastsectiondefs + \ifx\temptype\Ynothingkeyword + \ifx\sectionlevel\seckeyword + \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}% + \gdef\thissection{\thissectionname}}% + \fi + \else\ifx\temptype\Yomitfromtockeyword + % Don't redefine \thissection. + \else\ifx\temptype\Yappendixkeyword + \ifx\sectionlevel\seckeyword + \toks0={#1}% + \xdef\lastsectiondefs{% + \gdef\noexpand\thissectionname{\the\toks0}% + \gdef\noexpand\thissectionnum{#4}% + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: + \noexpand\thissectionname}% + }% + \fi + \else + \ifx\sectionlevel\seckeyword + \toks0={#1}% + \xdef\lastsectiondefs{% + \gdef\noexpand\thissectionname{\the\toks0}% + \gdef\noexpand\thissectionnum{#4}% + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: + \noexpand\thissectionname}% + }% + \fi + \fi\fi\fi + % + % Go into vertical mode. Usually we'll already be there, but we + % don't want the following whatsit to end up in a preceding paragraph + % if the document didn't happen to have a blank line. + \par + % + % Output the mark. Pass it through \safewhatsit, to take care of + % the preceding space. + \safewhatsit\domark + % + % Insert space above the heading. + \csname #2headingbreak\endcsname + % + % Now the second mark, after the heading break. No break points + % between here and the heading. + \global\let\prevsectiondefs=\lastsectiondefs + \domark + % + % Only insert the space after the number if we have a section number. + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unn}% + \gdef\lastsection{#1}% + \else\ifx\temptype\Yomitfromtockeyword + % for @headings -- no section number, don't include in toc, + % and don't redefine \lastsection. + \setbox0 = \hbox{}% + \def\toctype{omit}% + \let\sectionlevel=\empty + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{#4\enspace}% + \def\toctype{app}% + \gdef\lastsection{#1}% + \else + \setbox0 = \hbox{#4\enspace}% + \def\toctype{num}% + \gdef\lastsection{#1}% + \fi\fi\fi + % + % Write the toc entry (before \donoderef). See comments in \chapmacro. + \writetocentry{\toctype\sectionlevel}{#1}{#4}% + % + % Write the node reference (= pdf destination for pdftex). + % Again, see comments in \chapmacro. + \donoderef{#3}% + % + % Interline glue will be inserted when the vbox is completed. + % That glue will be a valid breakpoint for the page, since it'll be + % preceded by a whatsit (usually from the \donoderef, or from the + % \writetocentry if there was no node). We don't want to allow that + % break, since then the whatsits could end up on page n while the + % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000. + \nobreak + % + % Output the actual section heading. + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright + \hangindent=\wd0 % zero if no section number + \unhbox0 #1}% + }% + % Add extra space after the heading -- half of whatever came above it. + % Don't allow stretch, though. + \kern .5 \csname #2headingskip\endcsname + % + % Do not let the kern be a potential breakpoint, as it would be if it + % was followed by glue. + \nobreak + % + % We'll almost certainly start a paragraph next, so don't let that + % glue accumulate. (Not a breakpoint because it's preceded by a + % discardable item.) However, when a paragraph is not started next + % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out + % or the negative glue will cause weirdly wrong output, typically + % obscuring the section heading with something else. + \vskip-\parskip + % + % This is so the last item on the main vertical list is a known + % \penalty > 10000, so \startdefun, etc., can recognize the situation + % and do the needful. + \penalty 10001 +} + + +\message{toc,} +% Table of contents. +\newwrite\tocfile + +% Write an entry to the toc file, opening it if necessary. +% Called from @chapter, etc. +% +% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} +% We append the current node name (if any) and page number as additional +% arguments for the \{chap,sec,...}entry macros which will eventually +% read this. The node name is used in the pdf outlines as the +% destination to jump to. +% +% We open the .toc file for writing here instead of at @setfilename (or +% any other fixed time) so that @contents can be anywhere in the document. +% But if #1 is `omit', then we don't do anything. This is used for the +% table of contents chapter openings themselves. +% +\newif\iftocfileopened +\def\omitkeyword{omit}% +% +\def\writetocentry#1#2#3{% + \edef\writetoctype{#1}% + \ifx\writetoctype\omitkeyword \else + \iftocfileopened\else + \immediate\openout\tocfile = \jobname.toc + \global\tocfileopenedtrue + \fi + % + \iflinks + {\atdummies + \edef\temp{% + \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}% + \temp + }% + \fi + \fi + % + % Tell \shipout to create a pdf destination on each page, if we're + % writing pdf. These are used in the table of contents. We can't + % just write one on every page because the title pages are numbered + % 1 and 2 (the page numbers aren't printed), and so are the first + % two pages of the document. Thus, we'd have two destinations named + % `1', and two named `2'. + \ifpdf \global\pdfmakepagedesttrue \fi +} + + +% These characters do not print properly in the Computer Modern roman +% fonts, so we must take special care. This is more or less redundant +% with the Texinfo input format setup at the end of this file. +% +\def\activecatcodes{% + \catcode`\"=\active + \catcode`\$=\active + \catcode`\<=\active + \catcode`\>=\active + \catcode`\\=\active + \catcode`\^=\active + \catcode`\_=\active + \catcode`\|=\active + \catcode`\~=\active +} + + +% Read the toc file, which is essentially Texinfo input. +\def\readtocfile{% + \setupdatafile + \activecatcodes + \input \tocreadfilename +} + +\newskip\contentsrightmargin \contentsrightmargin=1in +\newcount\savepageno +\newcount\lastnegativepageno \lastnegativepageno = -1 + +% Prepare to read what we've written to \tocfile. +% +\def\startcontents#1{% + % If @setchapternewpage on, and @headings double, the contents should + % start on an odd page, unlike chapters. Thus, we maintain + % \contentsalignmacro in parallel with \pagealignmacro. + % From: Torbjorn Granlund + \contentsalignmacro + \immediate\closeout\tocfile + % + % Don't need to put `Contents' or `Short Contents' in the headline. + % It is abundantly clear what they are. + \chapmacro{#1}{Yomitfromtoc}{}% + % + \savepageno = \pageno + \begingroup % Set up to handle contents files properly. + \raggedbottom % Worry more about breakpoints than the bottom. + \entryrightmargin=\contentsrightmargin % Don't use the full line length. + % + % Roman numerals for page numbers. + \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi +} + +% redefined for the two-volume lispref. We always output on +% \jobname.toc even if this is redefined. +% +\def\tocreadfilename{\jobname.toc} + +% Normal (long) toc. +% +\def\contents{% + \startcontents{\putwordTOC}% + \openin 1 \tocreadfilename\space + \ifeof 1 \else + \readtocfile + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \ifeof 1 \else + \pdfmakeoutlines + \fi + \closein 1 + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno +} + +% And just the chapters. +\def\summarycontents{% + \startcontents{\putwordShortTOC}% + % + \let\partentry = \shortpartentry + \let\numchapentry = \shortchapentry + \let\appentry = \shortchapentry + \let\unnchapentry = \shortunnchapentry + % We want a true roman here for the page numbers. + \secfonts + \let\rm=\shortcontrm \let\bf=\shortcontbf + \let\sl=\shortcontsl \let\tt=\shortconttt + \rm + \hyphenpenalty = 10000 + \advance\baselineskip by 1pt % Open it up a little. + \def\numsecentry##1##2##3##4{} + \let\appsecentry = \numsecentry + \let\unnsecentry = \numsecentry + \let\numsubsecentry = \numsecentry + \let\appsubsecentry = \numsecentry + \let\unnsubsecentry = \numsecentry + \let\numsubsubsecentry = \numsecentry + \let\appsubsubsecentry = \numsecentry + \let\unnsubsubsecentry = \numsecentry + \openin 1 \tocreadfilename\space + \ifeof 1 \else + \readtocfile + \fi + \closein 1 + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno +} +\let\shortcontents = \summarycontents + +% Typeset the label for a chapter or appendix for the short contents. +% The arg is, e.g., `A' for an appendix, or `3' for a chapter. +% +\def\shortchaplabel#1{% + % This space should be enough, since a single number is .5em, and the + % widest letter (M) is 1em, at least in the Computer Modern fonts. + % But use \hss just in case. + % (This space doesn't include the extra space that gets added after + % the label; that gets put in by \shortchapentry above.) + % + % We'd like to right-justify chapter numbers, but that looks strange + % with appendix letters. And right-justifying numbers and + % left-justifying letters looks strange when there is less than 10 + % chapters. Have to read the whole toc once to know how many chapters + % there are before deciding ... + \hbox to 1em{#1\hss}% +} + +% These macros generate individual entries in the table of contents. +% The first argument is the chapter or section name. +% The last argument is the page number. +% The arguments in between are the chapter number, section number, ... + +% Parts, in the main contents. Replace the part number, which doesn't +% exist, with an empty box. Let's hope all the numbers have the same width. +% Also ignore the page number, which is conventionally not printed. +\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}} +\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}} +% +% Parts, in the short toc. +\def\shortpartentry#1#2#3#4{% + \penalty-300 + \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip + \shortchapentry{{\bf #1}}{\numeralbox}{}{}% +} + +% Chapters, in the main contents. +\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} + +% Chapters, in the short toc. +% See comments in \dochapentry re vbox and related settings. +\def\shortchapentry#1#2#3#4{% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% +} + +% Appendices, in the main contents. +% Need the word Appendix, and a fixed-size box. +% +\def\appendixbox#1{% + % We use M since it's probably the widest letter. + \setbox0 = \hbox{\putwordAppendix{} M}% + \hbox to \wd0{\putwordAppendix{} #1\hss}} +% +\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\hskip.7em#1}{#4}} + +% Unnumbered chapters. +\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} +\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} + +% Sections. +\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} +\let\appsecentry=\numsecentry +\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}} + +% Subsections. +\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}} +\let\appsubsecentry=\numsubsecentry +\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} + +% And subsubsections. +\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}} +\let\appsubsubsecentry=\numsubsubsecentry +\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}} + +% This parameter controls the indentation of the various levels. +% Same as \defaultparindent. +\newdimen\tocindent \tocindent = 15pt + +% Now for the actual typesetting. In all these, #1 is the text and #2 is the +% page number. +% +% If the toc has to be broken over pages, we want it to be at chapters +% if at all possible; hence the \penalty. +\def\dochapentry#1#2{% + \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip + \begingroup + % Move the page numbers slightly to the right + \advance\entryrightmargin by -0.05em + \chapentryfonts + \tocentry{#1}{\dopageno\bgroup#2\egroup}% + \endgroup + \nobreak\vskip .25\baselineskip plus.1\baselineskip +} + +\def\dosecentry#1#2{\begingroup + \secentryfonts \leftskip=\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +\def\dosubsecentry#1#2{\begingroup + \subsecentryfonts \leftskip=2\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +\def\dosubsubsecentry#1#2{\begingroup + \subsubsecentryfonts \leftskip=3\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +% We use the same \entry macro as for the index entries. +\let\tocentry = \entry + +% Space between chapter (or whatever) number and the title. +\def\labelspace{\hskip1em \relax} + +\def\dopageno#1{{\rm #1}} +\def\doshortpageno#1{{\rm #1}} + +\def\chapentryfonts{\secfonts \rm} +\def\secentryfonts{\textfonts} +\def\subsecentryfonts{\textfonts} +\def\subsubsecentryfonts{\textfonts} + + +\message{environments,} +% @foo ... @end foo. + +% @tex ... @end tex escapes into raw TeX temporarily. +% One exception: @ is still an escape character, so that @end tex works. +% But \@ or @@ will get a plain @ character. + +\envdef\tex{% + \setupmarkupstyle{tex}% + \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 + \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 + \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie + \catcode `\%=14 + \catcode `\+=\other + \catcode `\"=\other + \catcode `\|=\other + \catcode `\<=\other + \catcode `\>=\other + \catcode `\`=\other + \catcode `\'=\other + \escapechar=`\\ + % + % ' is active in math mode (mathcode"8000). So reset it, and all our + % other math active characters (just in case), to plain's definitions. + \mathactive + % + % Inverse of the list at the beginning of the file. + \let\b=\ptexb + \let\bullet=\ptexbullet + \let\c=\ptexc + \let\,=\ptexcomma + \let\.=\ptexdot + \let\dots=\ptexdots + \let\equiv=\ptexequiv + \let\!=\ptexexclam + \let\i=\ptexi + \let\indent=\ptexindent + \let\noindent=\ptexnoindent + \let\{=\ptexlbrace + \let\+=\tabalign + \let\}=\ptexrbrace + \let\/=\ptexslash + \let\sp=\ptexsp + \let\*=\ptexstar + %\let\sup=\ptexsup % do not redefine, we want @sup to work in math mode + \let\t=\ptext + \expandafter \let\csname top\endcsname=\ptextop % we've made it outer + \let\frenchspacing=\plainfrenchspacing + % + \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% + \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% + \def\@{@}% +} +% There is no need to define \Etex. + +% Define @lisp ... @end lisp. +% @lisp environment forms a group so it can rebind things, +% including the definition of @end lisp (which normally is erroneous). + +% Amount to narrow the margins by for @lisp. +\newskip\lispnarrowing \lispnarrowing=0.4in + +% This is the definition that ^^M gets inside @lisp, @example, and other +% such environments. \null is better than a space, since it doesn't +% have any width. +\def\lisppar{\null\endgraf} + +% This space is always present above and below environments. +\newskip\envskipamount \envskipamount = 0pt + +% Make spacing and below environment symmetrical. We use \parskip here +% to help in doing that, since in @example-like environments \parskip +% is reset to zero; thus the \afterenvbreak inserts no space -- but the +% start of the next paragraph will insert \parskip. +% +\def\aboveenvbreak{{% + % =10000 instead of <10000 because of a special case in \itemzzz and + % \sectionheading, q.v. + \ifnum \lastpenalty=10000 \else + \advance\envskipamount by \parskip + \endgraf + \ifdim\lastskip<\envskipamount + \removelastskip + \ifnum\lastpenalty<10000 + % Penalize breaking before the environment, because preceding text + % often leads into it. + \penalty100 + \fi + \vskip\envskipamount + \fi + \fi +}} + +\def\afterenvbreak{{% + % =10000 instead of <10000 because of a special case in \itemzzz and + % \sectionheading, q.v. + \ifnum \lastpenalty=10000 \else + \advance\envskipamount by \parskip + \endgraf + \ifdim\lastskip<\envskipamount + \removelastskip + % it's not a good place to break if the last penalty was \nobreak + % or better ... + \ifnum\lastpenalty<10000 \penalty-50 \fi + \vskip\envskipamount + \fi + \fi +}} + +% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will +% also clear it, so that its embedded environments do the narrowing again. +\let\nonarrowing=\relax + +% @cartouche ... @end cartouche: draw rectangle w/rounded corners around +% environment contents. +\font\circle=lcircle10 +\newdimen\circthick +\newdimen\cartouter\newdimen\cartinner +\newskip\normbskip\newskip\normpskip\newskip\normlskip +\circthick=\fontdimen8\circle +% +\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth +\def\ctr{{\hskip 6pt\circle\char'010}} +\def\cbl{{\circle\char'012\hskip -6pt}} +\def\cbr{{\hskip 6pt\circle\char'011}} +\def\carttop{\hbox to \cartouter{\hskip\lskip + \ctl\leaders\hrule height\circthick\hfil\ctr + \hskip\rskip}} +\def\cartbot{\hbox to \cartouter{\hskip\lskip + \cbl\leaders\hrule height\circthick\hfil\cbr + \hskip\rskip}} +% +\newskip\lskip\newskip\rskip + +\envdef\cartouche{% + \ifhmode\par\fi % can't be in the midst of a paragraph. + \startsavinginserts + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt % we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18.4pt % allow for 3pt kerns on either + % side, and for 6pt waste from + % each corner char, and rule thickness + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % + % If this cartouche directly follows a sectioning command, we need the + % \parskip glue (backspaced over by default) or the cartouche can + % collide with the section heading. + \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi + % + \setbox\groupbox=\vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \kern3pt + \hsize=\cartinner + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip + \comment % For explanation, see the end of def\group. +} +\def\Ecartouche{% + \ifhmode\par\fi + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup + \addgroupbox + \checkinserts +} + + +% This macro is called at the beginning of all the @example variants, +% inside a group. +\newdimen\nonfillparindent +\def\nonfillstart{% + \aboveenvbreak + \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy + \sepspaces % Make spaces be word-separators rather than space tokens. + \let\par = \lisppar % don't ignore blank lines + \obeylines % each line of input is a line of output + \parskip = 0pt + % Turn off paragraph indentation but redefine \indent to emulate + % the normal \indent. + \nonfillparindent=\parindent + \parindent = 0pt + \let\indent\nonfillindent + % + \emergencystretch = 0pt % don't try to avoid overfull boxes + \ifx\nonarrowing\relax + \advance \leftskip by \lispnarrowing + \exdentamount=\lispnarrowing + \else + \let\nonarrowing = \relax + \fi + \let\exdent=\nofillexdent +} + +\begingroup +\obeyspaces +% We want to swallow spaces (but not other tokens) after the fake +% @indent in our nonfill-environments, where spaces are normally +% active and set to @tie, resulting in them not being ignored after +% @indent. +\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}% +\gdef\nonfillindentcheck{% +\ifx\temp % +\expandafter\nonfillindentgobble% +\else% +\leavevmode\nonfillindentbox% +\fi% +}% +\endgroup +\def\nonfillindentgobble#1{\nonfillindent} +\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}} + +% If you want all examples etc. small: @set dispenvsize small. +% If you want even small examples the full size: @set dispenvsize nosmall. +% This affects the following displayed environments: +% @example, @display, @format, @lisp +% +\def\smallword{small} +\def\nosmallword{nosmall} +\let\SETdispenvsize\relax +\def\setnormaldispenv{% + \ifx\SETdispenvsize\smallword + % end paragraph for sake of leading, in case document has no blank + % line. This is redundant with what happens in \aboveenvbreak, but + % we need to do it before changing the fonts, and it's inconvenient + % to change the fonts afterward. + \ifnum \lastpenalty=10000 \else \endgraf \fi + \smallexamplefonts \rm + \fi +} +\def\setsmalldispenv{% + \ifx\SETdispenvsize\nosmallword + \else + \ifnum \lastpenalty=10000 \else \endgraf \fi + \smallexamplefonts \rm + \fi +} + +% We often define two environments, @foo and @smallfoo. +% Let's do it in one command. #1 is the env name, #2 the definition. +\def\makedispenvdef#1#2{% + \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}% + \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}% + \expandafter\let\csname E#1\endcsname \afterenvbreak + \expandafter\let\csname Esmall#1\endcsname \afterenvbreak +} + +% Define two environment synonyms (#1 and #2) for an environment. +\def\maketwodispenvdef#1#2#3{% + \makedispenvdef{#1}{#3}% + \makedispenvdef{#2}{#3}% +} +% +% @lisp: indented, narrowed, typewriter font; +% @example: same as @lisp. +% +% @smallexample and @smalllisp: use smaller fonts. +% Originally contributed by Pavel@xerox. +% +\maketwodispenvdef{lisp}{example}{% + \nonfillstart + \tt\setupmarkupstyle{example}% + \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. + \gobble % eat return +} +% @display/@smalldisplay: same as @lisp except keep current font. +% +\makedispenvdef{display}{% + \nonfillstart + \gobble +} + +% @format/@smallformat: same as @display except don't narrow margins. +% +\makedispenvdef{format}{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} + +% @flushleft: same as @format, but doesn't obey \SETdispenvsize. +\envdef\flushleft{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} +\let\Eflushleft = \afterenvbreak + +% @flushright. +% +\envdef\flushright{% + \let\nonarrowing = t% + \nonfillstart + \advance\leftskip by 0pt plus 1fill\relax + \gobble +} +\let\Eflushright = \afterenvbreak + + +% @raggedright does more-or-less normal line breaking but no right +% justification. From plain.tex. Don't stretch around special +% characters in urls in this environment, since the stretch at the right +% should be enough. +\envdef\raggedright{% + \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax + \def\urefprestretchamount{0pt}% + \def\urefpoststretchamount{0pt}% +} +\let\Eraggedright\par + +\envdef\raggedleft{% + \parindent=0pt \leftskip0pt plus2em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedleft\par + +\envdef\raggedcenter{% + \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedcenter\par + + +% @quotation does normal linebreaking (hence we can't use \nonfillstart) +% and narrows the margins. We keep \parskip nonzero in general, since +% we're doing normal filling. So, when using \aboveenvbreak and +% \afterenvbreak, temporarily make \parskip 0. +% +\makedispenvdef{quotation}{\quotationstart} +% +\def\quotationstart{% + \indentedblockstart % same as \indentedblock, but increase right margin too. + \ifx\nonarrowing\relax + \advance\rightskip by \lispnarrowing + \fi + \parsearg\quotationlabel +} + +% We have retained a nonzero parskip for the environment, since we're +% doing normal filling. +% +\def\Equotation{% + \par + \ifx\quotationauthor\thisisundefined\else + % indent a bit. + \leftline{\kern 2\leftskip \sl ---\quotationauthor}% + \fi + {\parskip=0pt \afterenvbreak}% +} +\def\Esmallquotation{\Equotation} + +% If we're given an argument, typeset it in bold with a colon after. +\def\quotationlabel#1{% + \def\temp{#1}% + \ifx\temp\empty \else + {\bf #1: }% + \fi +} + +% @indentedblock is like @quotation, but indents only on the left and +% has no optional argument. +% +\makedispenvdef{indentedblock}{\indentedblockstart} +% +\def\indentedblockstart{% + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \parindent=0pt + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \exdentamount = \lispnarrowing + \else + \let\nonarrowing = \relax + \fi +} + +% Keep a nonzero parskip for the environment, since we're doing normal filling. +% +\def\Eindentedblock{% + \par + {\parskip=0pt \afterenvbreak}% +} +\def\Esmallindentedblock{\Eindentedblock} + + +% LaTeX-like @verbatim...@end verbatim and @verb{...} +% If we want to allow any as delimiter, +% we need the curly braces so that makeinfo sees the @verb command, eg: +% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org +% +% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook. +% +% [Knuth] p.344; only we need to do the other characters Texinfo sets +% active too. Otherwise, they get lost as the first character on a +% verbatim line. +\def\dospecials{% + \do\ \do\\\do\{\do\}\do\$\do\&% + \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~% + \do\<\do\>\do\|\do\@\do+\do\"% + % Don't do the quotes -- if we do, @set txicodequoteundirected and + % @set txicodequotebacktick will not have effect on @verb and + % @verbatim, and ?` and !` ligatures won't get disabled. + %\do\`\do\'% +} +% +% [Knuth] p. 380 +\def\uncatcodespecials{% + \def\do##1{\catcode`##1=\other}\dospecials} +% +% Setup for the @verb command. +% +% Eight spaces for a tab +\begingroup + \catcode`\^^I=\active + \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }} +\endgroup +% +\def\setupverb{% + \tt % easiest (and conventionally used) font for verbatim + \def\par{\leavevmode\endgraf}% + \setupmarkupstyle{verb}% + \tabeightspaces + % Respect line breaks, + % print special symbols as themselves, and + % make each space count + % must do in this order: + \obeylines \uncatcodespecials \sepspaces +} + +% Setup for the @verbatim environment +% +% Real tab expansion. +\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount +% +% We typeset each line of the verbatim in an \hbox, so we can handle +% tabs. The \global is in case the verbatim line starts with an accent, +% or some other command that starts with a begin-group. Otherwise, the +% entire \verbbox would disappear at the corresponding end-group, before +% it is typeset. Meanwhile, we can't have nested verbatim commands +% (can we?), so the \global won't be overwriting itself. +\newbox\verbbox +\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup} +% +\begingroup + \catcode`\^^I=\active + \gdef\tabexpand{% + \catcode`\^^I=\active + \def^^I{\leavevmode\egroup + \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab + \divide\dimen\verbbox by\tabw + \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw + \advance\dimen\verbbox by\tabw % advance to next multiple of \tabw + \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox + }% + } +\endgroup + +% start the verbatim environment. +\def\setupverbatim{% + \let\nonarrowing = t% + \nonfillstart + \tt % easiest (and conventionally used) font for verbatim + % The \leavevmode here is for blank lines. Otherwise, we would + % never \starttabox and the \egroup would end verbatim mode. + \def\par{\leavevmode\egroup\box\verbbox\endgraf}% + \tabexpand + \setupmarkupstyle{verbatim}% + % Respect line breaks, + % print special symbols as themselves, and + % make each space count. + % Must do in this order: + \obeylines \uncatcodespecials \sepspaces + \everypar{\starttabbox}% +} + +% Do the @verb magic: verbatim text is quoted by unique +% delimiter characters. Before first delimiter expect a +% right brace, after last delimiter expect closing brace: +% +% \def\doverb'{'#1'}'{#1} +% +% [Knuth] p. 382; only eat outer {} +\begingroup + \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other + \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] +\endgroup +% +\def\verb{\begingroup\setupverb\doverb} +% +% +% Do the @verbatim magic: define the macro \doverbatim so that +% the (first) argument ends when '@end verbatim' is reached, ie: +% +% \def\doverbatim#1@end verbatim{#1} +% +% For Texinfo it's a lot easier than for LaTeX, +% because texinfo's \verbatim doesn't stop at '\end{verbatim}': +% we need not redefine '\', '{' and '}'. +% +% Inspired by LaTeX's verbatim command set [latex.ltx] +% +\begingroup + \catcode`\ =\active + \obeylines % + % ignore everything up to the first ^^M, that's the newline at the end + % of the @verbatim input line itself. Otherwise we get an extra blank + % line in the output. + \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% + % We really want {...\end verbatim} in the body of the macro, but + % without the active space; thus we have to use \xdef and \gobble. +\endgroup +% +\envdef\verbatim{% + \setupverbatim\doverbatim +} +\let\Everbatim = \afterenvbreak + + +% @verbatiminclude FILE - insert text of file in verbatim environment. +% +\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude} +% +\def\doverbatiminclude#1{% + {% + \makevalueexpandable + \setupverbatim + \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}% + \input #1 + \afterenvbreak + }% +} + +% @copying ... @end copying. +% Save the text away for @insertcopying later. +% +% We save the uninterpreted tokens, rather than creating a box. +% Saving the text in a box would be much easier, but then all the +% typesetting commands (@smallbook, font changes, etc.) have to be done +% beforehand -- and a) we want @copying to be done first in the source +% file; b) letting users define the frontmatter in as flexible order as +% possible is desirable. +% +\def\copying{\checkenv{}\begingroup\scanargctxt\docopying} +\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}} +% +\def\insertcopying{% + \begingroup + \parindent = 0pt % paragraph indentation looks wrong on title page + \scanexp\copyingtext + \endgroup +} + + +\message{defuns,} +% @defun etc. + +\newskip\defbodyindent \defbodyindent=.4in +\newskip\defargsindent \defargsindent=50pt +\newskip\deflastargmargin \deflastargmargin=18pt +\newcount\defunpenalty + +% Start the processing of @deffn: +\def\startdefun{% + \ifnum\lastpenalty<10000 + \medbreak + \defunpenalty=10003 % Will keep this @deffn together with the + % following @def command, see below. + \else + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we need to allow a + % break somewhere. Check specifically for penalty 10002, inserted + % by \printdefunline, instead of 10000, since the sectioning + % commands also insert a nobreak penalty, and we don't want to allow + % a break between a section heading and a defun. + % + % As a further refinement, we avoid "club" headers by signalling + % with penalty of 10003 after the very first @deffn in the + % sequence (see above), and penalty of 10002 after any following + % @def command. + \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi + % + % Similarly, after a section heading, do not allow a break. + % But do insert the glue. + \medskip % preceded by discardable penalty, so not a breakpoint + \fi + % + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent +} + +\def\dodefunx#1{% + % First, check whether we are in the right environment: + \checkenv#1% + % + % As above, allow line break if we have multiple x headers in a row. + % It's not a great place, though. + \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi + % + % And now, it's time to reuse the body of the original defun: + \expandafter\gobbledefun#1% +} +\def\gobbledefun#1\startdefun{} + +% \printdefunline \deffnheader{text} +% +\def\printdefunline#1#2{% + \begingroup + % call \deffnheader: + #1#2 \endheader + % common ending: + \interlinepenalty = 10000 + \advance\rightskip by 0pt plus 1fil\relax + \endgraf + \nobreak\vskip -\parskip + \penalty\defunpenalty % signal to \startdefun and \dodefunx + % Some of the @defun-type tags do not enable magic parentheses, + % rendering the following check redundant. But we don't optimize. + \checkparencounts + \endgroup +} + +\def\Edefun{\endgraf\medbreak} + +% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; +% the only thing remaining is to define \deffnheader. +% +\def\makedefun#1{% + \expandafter\let\csname E#1\endcsname = \Edefun + \edef\temp{\noexpand\domakedefun + \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}% + \temp +} + +% \domakedefun \deffn \deffnx \deffnheader { (defn. of \deffnheader) } +% +% Define \deffn and \deffnx, without parameters. +% \deffnheader has to be defined explicitly. +% +\def\domakedefun#1#2#3{% + \envdef#1{% + \startdefun + \doingtypefnfalse % distinguish typed functions from all else + \parseargusing\activeparens{\printdefunline#3}% + }% + \def#2{\dodefunx#1}% + \def#3% +} + +\newif\ifdoingtypefn % doing typed function? +\newif\ifrettypeownline % typeset return type on its own line? + +% @deftypefnnewline on|off says whether the return type of typed functions +% are printed on their own line. This affects @deftypefn, @deftypefun, +% @deftypeop, and @deftypemethod. +% +\parseargdef\deftypefnnewline{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @txideftypefnnl value `\temp', + must be on|off}% + \fi\fi +} + +% Untyped functions: + +% @deffn category name args +\makedefun{deffn}{\deffngeneral{}} + +% @deffn category class name args +\makedefun{defop}#1 {\defopon{#1\ \putwordon}} + +% \defopon {category on}class name args +\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } + +% \deffngeneral {subind}category name args +% +\def\deffngeneral#1#2 #3 #4\endheader{% + % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. + \dosubind{fn}{\code{#3}}{#1}% + \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% +} + +% Typed functions: + +% @deftypefn category type name args +\makedefun{deftypefn}{\deftypefngeneral{}} + +% @deftypeop category class type name args +\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}} + +% \deftypeopon {category on}class type name args +\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } + +% \deftypefngeneral {subind}category type name args +% +\def\deftypefngeneral#1#2 #3 #4 #5\endheader{% + \dosubind{fn}{\code{#4}}{#1}% + \doingtypefntrue + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} + +% Typed variables: + +% @deftypevr category type var args +\makedefun{deftypevr}{\deftypecvgeneral{}} + +% @deftypecv category class type var args +\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}} + +% \deftypecvof {category of}class type var args +\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} } + +% \deftypecvgeneral {subind}category type var args +% +\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{% + \dosubind{vr}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} + +% Untyped variables: + +% @defvr category var args +\makedefun{defvr}#1 {\deftypevrheader{#1} {} } + +% @defcv category class var args +\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}} + +% \defcvof {category of}class var args +\def\defcvof#1#2 {\deftypecvof{#1}#2 {} } + +% Types: + +% @deftp category name args +\makedefun{deftp}#1 #2 #3\endheader{% + \doind{tp}{\code{#2}}% + \defname{#1}{}{#2}\defunargs{#3\unskip}% +} + +% Remaining @defun-like shortcuts: +\makedefun{defun}{\deffnheader{\putwordDeffunc} } +\makedefun{defmac}{\deffnheader{\putwordDefmac} } +\makedefun{defspec}{\deffnheader{\putwordDefspec} } +\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} } +\makedefun{defvar}{\defvrheader{\putwordDefvar} } +\makedefun{defopt}{\defvrheader{\putwordDefopt} } +\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} } +\makedefun{defmethod}{\defopon\putwordMethodon} +\makedefun{deftypemethod}{\deftypeopon\putwordMethodon} +\makedefun{defivar}{\defcvof\putwordInstanceVariableof} +\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof} + +% \defname, which formats the name of the @def (not the args). +% #1 is the category, such as "Function". +% #2 is the return type, if any. +% #3 is the function name. +% +% We are followed by (but not passed) the arguments, if any. +% +\def\defname#1#2#3{% + \par + % Get the values of \leftskip and \rightskip as they were outside the @def... + \advance\leftskip by -\defbodyindent + % + % Determine if we are typesetting the return type of a typed function + % on a line by itself. + \rettypeownlinefalse + \ifdoingtypefn % doing a typed function specifically? + % then check user option for putting return type on its own line: + \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else + \rettypeownlinetrue + \fi + \fi + % + % How we'll format the category name. Putting it in brackets helps + % distinguish it from the body text that may end up on the next line + % just below it. + \def\temp{#1}% + \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} + % + % Figure out line sizes for the paragraph shape. We'll always have at + % least two. + \tempnum = 2 + % + % The first line needs space for \box0; but if \rightskip is nonzero, + % we need only space for the part of \box0 which exceeds it: + \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % + % If doing a return type on its own line, we'll have another line. + \ifrettypeownline + \advance\tempnum by 1 + \def\maybeshapeline{0in \hsize}% + \else + \def\maybeshapeline{}% + \fi + % + % The continuations: + \dimen2=\hsize \advance\dimen2 by -\defargsindent + % + % The final paragraph shape: + \parshape \tempnum 0in \dimen0 \maybeshapeline \defargsindent \dimen2 + % + % Put the category name at the right margin. + \noindent + \hbox to 0pt{% + \hfil\box0 \kern-\hsize + % \hsize has to be shortened this way: + \kern\leftskip + % Intentionally do not respect \rightskip, since we need the space. + }% + % + % Allow all lines to be underfull without complaint: + \tolerance=10000 \hbadness=10000 + \exdentamount=\defbodyindent + {% + % defun fonts. We use typewriter by default (used to be bold) because: + % . we're printing identifiers, they should be in tt in principle. + % . in languages with many accents, such as Czech or French, it's + % common to leave accents off identifiers. The result looks ok in + % tt, but exceedingly strange in rm. + % . we don't want -- and --- to be treated as ligatures. + % . this still does not fix the ?` and !` ligatures, but so far no + % one has made identifiers using them :). + \df \tt + \def\temp{#2}% text of the return type + \ifx\temp\empty\else + \tclose{\temp}% typeset the return type + \ifrettypeownline + % put return type on its own line; prohibit line break following: + \hfil\vadjust{\nobreak}\break + \else + \space % type on same line, so just followed by a space + \fi + \fi % no return type + #3% output function name + }% + {\rm\enskip}% hskip 0.5 em of \tenrm + % + \boldbrax + % arguments will be output next, if any. +} + +% Print arguments in slanted roman (not ttsl), inconsistently with using +% tt for the name. This is because literal text is sometimes needed in +% the argument list (groff manual), and ttsl and tt are not very +% distinguishable. Prevent hyphenation at `-' chars. +% +\def\defunargs#1{% + % use sl by default (not ttsl), + % tt for the names. + \df \sl \hyphenchar\font=0 + % + % On the other hand, if an argument has two dashes (for instance), we + % want a way to get ttsl. We used to recommend @var for that, so + % leave the code in, but it's strange for @var to lead to typewriter. + % Nowadays we recommend @code, since the difference between a ttsl hyphen + % and a tt hyphen is pretty tiny. @code also disables ?` !`. + \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% + #1% + \sl\hyphenchar\font=45 +} + +% We want ()&[] to print specially on the defun line. +% +\def\activeparens{% + \catcode`\(=\active \catcode`\)=\active + \catcode`\[=\active \catcode`\]=\active + \catcode`\&=\active +} + +% Make control sequences which act like normal parenthesis chars. +\let\lparen = ( \let\rparen = ) + +% Be sure that we always have a definition for `(', etc. For example, +% if the fn name has parens in it, \boldbrax will not be in effect yet, +% so TeX would otherwise complain about undefined control sequence. +{ + \activeparens + \global\let(=\lparen \global\let)=\rparen + \global\let[=\lbrack \global\let]=\rbrack + \global\let& = \& + + \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} + \gdef\magicamp{\let&=\amprm} +} + +\newcount\parencount + +% If we encounter &foo, then turn on ()-hacking afterwards +\newif\ifampseen +\def\amprm#1 {\ampseentrue{\bf\ }} + +\def\parenfont{% + \ifampseen + % At the first level, print parens in roman, + % otherwise use the default font. + \ifnum \parencount=1 \rm \fi + \else + % The \sf parens (in \boldbrax) actually are a little bolder than + % the contained text. This is especially needed for [ and ] . + \sf + \fi +} +\def\infirstlevel#1{% + \ifampseen + \ifnum\parencount=1 + #1% + \fi + \fi +} +\def\bfafterword#1 {#1 \bf} + +\def\opnr{% + \global\advance\parencount by 1 + {\parenfont(}% + \infirstlevel \bfafterword +} +\def\clnr{% + {\parenfont)}% + \infirstlevel \sl + \global\advance\parencount by -1 +} + +\newcount\brackcount +\def\lbrb{% + \global\advance\brackcount by 1 + {\bf[}% +} +\def\rbrb{% + {\bf]}% + \global\advance\brackcount by -1 +} + +\def\checkparencounts{% + \ifnum\parencount=0 \else \badparencount \fi + \ifnum\brackcount=0 \else \badbrackcount \fi +} +% these should not use \errmessage; the glibc manual, at least, actually +% has such constructs (when documenting function pointers). +\def\badparencount{% + \message{Warning: unbalanced parentheses in @def...}% + \global\parencount=0 +} +\def\badbrackcount{% + \message{Warning: unbalanced square brackets in @def...}% + \global\brackcount=0 +} + + +\message{macros,} +% @macro. + +% To do this right we need a feature of e-TeX, \scantokens, +% which we arrange to emulate with a temporary file in ordinary TeX. +\ifx\eTeXversion\thisisundefined + \newwrite\macscribble + \def\scantokens#1{% + \toks0={#1}% + \immediate\openout\macscribble=\jobname.tmp + \immediate\write\macscribble{\the\toks0}% + \immediate\closeout\macscribble + \input \jobname.tmp + } +\fi + +\let\aftermacroxxx\relax +\def\aftermacro{\aftermacroxxx} + +% alias because \c means cedilla in @tex or @math +\let\texinfoc=\c + +% Used at the time of macro expansion. +% Argument is macro body with arguments substituted +\def\scanmacro#1{% + \newlinechar`\^^M + \def\xprocessmacroarg{\eatspaces}% + % + % Process the macro body under the current catcode regime. + \scantokens{#1\texinfoc}\aftermacro% + % + % The \c is to remove the \newlinechar added by \scantokens, and + % can be noticed by \parsearg. + % The \aftermacro allows a \comment at the end of the macro definition + % to duplicate itself past the final \newlinechar added by \scantokens: + % this is used in the definition of \group to comment out a newline. We + % don't do the same for \c to support Texinfo files with macros that ended + % with a @c, which should no longer be necessary. + % We avoid surrounding the call to \scantokens with \bgroup and \egroup + % to allow macros to open or close groups themselves. +} + +\def\scanexp#1{% + \bgroup + % Undo catcode changes of \startcontents and \printindex + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. + % FIXME: This may not be needed. + %\catcode`\@=0 \catcode`\\=\active \escapechar=`\@ + \edef\temp{\noexpand\scanmacro{#1}}% + \temp + \egroup +} + +\newcount\paramno % Count of parameters +\newtoks\macname % Macro name +\newif\ifrecursive % Is it recursive? + +% List of all defined macros in the form +% \definedummyword\macro1\definedummyword\macro2... +% Currently is also contains all @aliases; the list can be split +% if there is a need. +\def\macrolist{} + +% Add the macro to \macrolist +\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname} +\def\addtomacrolistxxx#1{% + \toks0 = \expandafter{\macrolist\definedummyword#1}% + \xdef\macrolist{\the\toks0}% +} + +% Utility routines. +% This does \let #1 = #2, with \csnames; that is, +% \let \csname#1\endcsname = \csname#2\endcsname +% (except of course we have to play expansion games). +% +\def\cslet#1#2{% + \expandafter\let + \csname#1\expandafter\endcsname + \csname#2\endcsname +} + +% Trim leading and trailing spaces off a string. +% Concepts from aro-bend problem 15 (see CTAN). +{\catcode`\@=11 +\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }} +\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@} +\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @} +\def\unbrace#1{#1} +\unbrace{\gdef\trim@@@ #1 } #2@{#1} +} + +% Trim a single trailing ^^M off a string. +{\catcode`\^^M=\other \catcode`\Q=3% +\gdef\eatcr #1{\eatcra #1Q^^MQ}% +\gdef\eatcra#1^^MQ{\eatcrb#1Q}% +\gdef\eatcrb#1Q#2Q{#1}% +} + +% Macro bodies are absorbed as an argument in a context where +% all characters are catcode 10, 11 or 12, except \ which is active +% (as in normal texinfo). It is necessary to change the definition of \ +% to recognize macro arguments; this is the job of \mbodybackslash. +% +% Non-ASCII encodings make 8-bit characters active, so un-activate +% them to avoid their expansion. Must do this non-globally, to +% confine the change to the current group. +% +% It's necessary to have hard CRs when the macro is executed. This is +% done by making ^^M (\endlinechar) catcode 12 when reading the macro +% body, and then making it the \newlinechar in \scanmacro. +% +\def\scanctxt{% used as subroutine + \catcode`\"=\other + \catcode`\+=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\^=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\~=\other + \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi +} + +\def\scanargctxt{% used for copying and captions, not macros. + \scanctxt + \catcode`\@=\other + \catcode`\\=\other + \catcode`\^^M=\other +} + +\def\macrobodyctxt{% used for @macro definitions + \scanctxt + \catcode`\ =\other + \catcode`\@=\other + \catcode`\{=\other + \catcode`\}=\other + \catcode`\^^M=\other + \usembodybackslash +} + +% Used when scanning braced macro arguments. Note, however, that catcode +% changes here are ineffectual if the macro invocation was nested inside +% an argument to another Texinfo command. +\def\macroargctxt{% + \scanctxt + \catcode`\ =\active + \catcode`\^^M=\other + \catcode`\\=\active +} + +\def\macrolineargctxt{% used for whole-line arguments without braces + \scanctxt + \catcode`\{=\other + \catcode`\}=\other +} + +% \mbodybackslash is the definition of \ in @macro bodies. +% It maps \foo\ => \csname macarg.foo\endcsname => #N +% where N is the macro parameter number. +% We define \csname macarg.\endcsname to be \realbackslash, so +% \\ in macro replacement text gets you a backslash. +% +{\catcode`@=0 @catcode`@\=@active + @gdef@usembodybackslash{@let\=@mbodybackslash} + @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} +} +\expandafter\def\csname macarg.\endcsname{\realbackslash} + +\def\margbackslash#1{\char`\#1 } + +\def\macro{\recursivefalse\parsearg\macroxxx} +\def\rmacro{\recursivetrue\parsearg\macroxxx} + +\def\macroxxx#1{% + \getargs{#1}% now \macname is the macname and \argl the arglist + \ifx\argl\empty % no arguments + \paramno=0\relax + \else + \expandafter\parsemargdef \argl;% + \if\paramno>256\relax + \ifx\eTeXversion\thisisundefined + \errhelp = \EMsimple + \errmessage{You need eTeX to compile a file with macros with more than 256 arguments} + \fi + \fi + \fi + \if1\csname ismacro.\the\macname\endcsname + \message{Warning: redefining \the\macname}% + \else + \expandafter\ifx\csname \the\macname\endcsname \relax + \else \errmessage{Macro name \the\macname\space already defined}\fi + \global\cslet{macsave.\the\macname}{\the\macname}% + \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% + \addtomacrolist{\the\macname}% + \fi + \begingroup \macrobodyctxt + \ifrecursive \expandafter\parsermacbody + \else \expandafter\parsemacbody + \fi} + +\parseargdef\unmacro{% + \if1\csname ismacro.#1\endcsname + \global\cslet{#1}{macsave.#1}% + \global\expandafter\let \csname ismacro.#1\endcsname=0% + % Remove the macro name from \macrolist: + \begingroup + \expandafter\let\csname#1\endcsname \relax + \let\definedummyword\unmacrodo + \xdef\macrolist{\macrolist}% + \endgroup + \else + \errmessage{Macro #1 not defined}% + \fi +} + +% Called by \do from \dounmacro on each macro. The idea is to omit any +% macro definitions that have been changed to \relax. +% +\def\unmacrodo#1{% + \ifx #1\relax + % remove this + \else + \noexpand\definedummyword \noexpand#1% + \fi +} + +% \getargs -- Parse the arguments to a @macro line. Set \macname to +% the name of the macro, and \argl to the braced argument list. +\def\getargs#1{\getargsxxx#1{}} +\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} +\def\getmacname#1 #2\relax{\macname={#1}} +\def\getmacargs#1{\def\argl{#1}} +% This made use of the feature that if the last token of a +% is #, then the preceding argument is delimited by +% an opening brace, and that opening brace is not consumed. + +% Parse the optional {params} list to @macro or @rmacro. +% Set \paramno to the number of arguments, +% and \paramlist to a parameter text for the macro (e.g. #1,#2,#3 for a +% three-param macro.) Define \macarg.BLAH for each BLAH in the params +% list to some hook where the argument is to be expanded. If there are +% less than 10 arguments that hook is to be replaced by ##N where N +% is the position in that list, that is to say the macro arguments are to be +% defined `a la TeX in the macro body. +% +% That gets used by \mbodybackslash (above). +% +% If there are 10 or more arguments, a different technique is used: see +% \parsemmanyargdef. +% +\def\parsemargdef#1;{% + \paramno=0\def\paramlist{}% + \let\hash\relax + % \hash is redefined to `#' later to get it into definitions + \let\processmacroarg\relax + \parsemargdefxxx#1,;,% + \ifnum\paramno<10\relax\else + \paramno0\relax + \parsemmanyargdef@@#1,;,% 10 or more arguments + \fi +} +\def\parsemargdefxxx#1,{% + \if#1;\let\next=\relax + \else \let\next=\parsemargdefxxx + \advance\paramno by 1 + \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname + {\processmacroarg{\hash\the\paramno}}% + \edef\paramlist{\paramlist\hash\the\paramno,}% + \fi\next} + +% \parsemacbody, \parsermacbody +% +% Read recursive and nonrecursive macro bodies. (They're different since +% rec and nonrec macros end differently.) +% +% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro +% body to be transformed. +% Set \macrobody to the body of the macro, and call \defmacro. +% +{\catcode`\ =\other\long\gdef\parsemacbody#1@end macro{% +\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}% +{\catcode`\ =\other\long\gdef\parsermacbody#1@end rmacro{% +\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}% + +% Make @ a letter, so that we can make private-to-Texinfo macro names. +\edef\texiatcatcode{\the\catcode`\@} +\catcode `@=11\relax + +%%%%%%%%%%%%%% Code for > 10 arguments only %%%%%%%%%%%%%%%%%% + +% If there are 10 or more arguments, a different technique is used, where the +% hook remains in the body, and when macro is to be expanded the body is +% processed again to replace the arguments. +% +% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the +% argument N value and then \edef the body (nothing else will expand because of +% the catcode regime under which the body was input). +% +% If you compile with TeX (not eTeX), and you have macros with 10 or more +% arguments, no macro can have more than 256 arguments (else error). +% +% In case that there are 10 or more arguments we parse again the arguments +% list to set new definitions for the \macarg.BLAH macros corresponding to +% each BLAH argument. It was anyhow needed to parse already once this list +% in order to count the arguments, and as macros with at most 9 arguments +% are by far more frequent than macro with 10 or more arguments, defining +% twice the \macarg.BLAH macros does not cost too much processing power. +\def\parsemmanyargdef@@#1,{% + \if#1;\let\next=\relax + \else + \let\next=\parsemmanyargdef@@ + \edef\tempb{\eatspaces{#1}}% + \expandafter\def\expandafter\tempa + \expandafter{\csname macarg.\tempb\endcsname}% + % Note that we need some extra \noexpand\noexpand, this is because we + % don't want \the to be expanded in the \parsermacbody as it uses an + % \xdef . + \expandafter\edef\tempa + {\noexpand\noexpand\noexpand\the\toks\the\paramno}% + \advance\paramno by 1\relax + \fi\next} + + +\let\endargs@\relax +\let\nil@\relax +\def\nilm@{\nil@}% +\long\def\nillm@{\nil@}% + +% This macro is expanded during the Texinfo macro expansion, not during its +% definition. It gets all the arguments' values and assigns them to macros +% macarg.ARGNAME +% +% #1 is the macro name +% #2 is the list of argument names +% #3 is the list of argument values +\def\getargvals@#1#2#3{% + \def\macargdeflist@{}% + \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion. + \def\paramlist{#2,\nil@}% + \def\macroname{#1}% + \begingroup + \macroargctxt + \def\argvaluelist{#3,\nil@}% + \def\@tempa{#3}% + \ifx\@tempa\empty + \setemptyargvalues@ + \else + \getargvals@@ + \fi +} +\def\getargvals@@{% + \ifx\paramlist\nilm@ + % Some sanity check needed here that \argvaluelist is also empty. + \ifx\argvaluelist\nillm@ + \else + \errhelp = \EMsimple + \errmessage{Too many arguments in macro `\macroname'!}% + \fi + \let\next\macargexpandinbody@ + \else + \ifx\argvaluelist\nillm@ + % No more arguments values passed to macro. Set remaining named-arg + % macros to empty. + \let\next\setemptyargvalues@ + \else + % pop current arg name into \@tempb + \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}% + \expandafter\@tempa\expandafter{\paramlist}% + % pop current argument value into \@tempc + \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}% + \expandafter\@tempa\expandafter{\argvaluelist}% + % Here \@tempb is the current arg name and \@tempc is the current arg value. + % First place the new argument macro definition into \@tempd + \expandafter\macname\expandafter{\@tempc}% + \expandafter\let\csname macarg.\@tempb\endcsname\relax + \expandafter\def\expandafter\@tempe\expandafter{% + \csname macarg.\@tempb\endcsname}% + \edef\@tempd{\long\def\@tempe{\the\macname}}% + \push@\@tempd\macargdeflist@ + \let\next\getargvals@@ + \fi + \fi + \next +} + +\def\push@#1#2{% + \expandafter\expandafter\expandafter\def + \expandafter\expandafter\expandafter#2% + \expandafter\expandafter\expandafter{% + \expandafter#1#2}% +} + +% Replace arguments by their values in the macro body, and place the result +% in macro \@tempa. +% +\def\macvalstoargs@{% + % To do this we use the property that token registers that are \the'ed + % within an \edef expand only once. So we are going to place all argument + % values into respective token registers. + % + % First we save the token context, and initialize argument numbering. + \begingroup + \paramno0\relax + % Then, for each argument number #N, we place the corresponding argument + % value into a new token list register \toks#N + \expandafter\putargsintokens@\saveparamlist@,;,% + % Then, we expand the body so that argument are replaced by their + % values. The trick for values not to be expanded themselves is that they + % are within tokens and that tokens expand only once in an \edef . + \edef\@tempc{\csname mac.\macroname .body\endcsname}% + % Now we restore the token stack pointer to free the token list registers + % which we have used, but we make sure that expanded body is saved after + % group. + \expandafter + \endgroup + \expandafter\def\expandafter\@tempa\expandafter{\@tempc}% + } + +% Define the named-macro outside of this group and then close this group. +% +\def\macargexpandinbody@{% + \expandafter + \endgroup + \macargdeflist@ + % First the replace in body the macro arguments by their values, the result + % is in \@tempa . + \macvalstoargs@ + % Then we point at the \norecurse or \gobble (for recursive) macro value + % with \@tempb . + \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname + % Depending on whether it is recursive or not, we need some tailing + % \egroup . + \ifx\@tempb\gobble + \let\@tempc\relax + \else + \let\@tempc\egroup + \fi + % And now we do the real job: + \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}% + \@tempd +} + +\def\putargsintokens@#1,{% + \if#1;\let\next\relax + \else + \let\next\putargsintokens@ + % First we allocate the new token list register, and give it a temporary + % alias \@tempb . + \toksdef\@tempb\the\paramno + % Then we place the argument value into that token list register. + \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname + \expandafter\@tempb\expandafter{\@tempa}% + \advance\paramno by 1\relax + \fi + \next +} + +% Trailing missing arguments are set to empty. +% +\def\setemptyargvalues@{% + \ifx\paramlist\nilm@ + \let\next\macargexpandinbody@ + \else + \expandafter\setemptyargvaluesparser@\paramlist\endargs@ + \let\next\setemptyargvalues@ + \fi + \next +} + +\def\setemptyargvaluesparser@#1,#2\endargs@{% + \expandafter\def\expandafter\@tempa\expandafter{% + \expandafter\def\csname macarg.#1\endcsname{}}% + \push@\@tempa\macargdeflist@ + \def\paramlist{#2}% +} + +% #1 is the element target macro +% #2 is the list macro +% #3,#4\endargs@ is the list value +\def\pop@#1#2#3,#4\endargs@{% + \def#1{#3}% + \def#2{#4}% +} +\long\def\longpop@#1#2#3,#4\endargs@{% + \long\def#1{#3}% + \long\def#2{#4}% +} + + +%%%%%%%%%%%%%% End of code for > 10 arguments %%%%%%%%%%%%%%%%%% + + + +% Remove following spaces at the expansion stage. +% This works because spaces are discarded before each argument when TeX is +% getting the arguments for a macro. +% This must not be immediately followed by a }. +\long\def\gobblespaces#1{#1} + +% This defines a Texinfo @macro or @rmacro, called by \parsemacbody. +% \macrobody has the body of the macro in it, with placeholders for +% its parameters, looking like "\processmacroarg{\hash 1}". +% \paramno is the number of parameters +% \paramlist is a TeX parameter text, e.g. "#1,#2,#3," +% There are eight cases: recursive and nonrecursive macros of zero, one, +% up to nine, and many arguments. +% \xdef is used so that macro definitions will survive the file +% they're defined in: @include reads the file inside a group. +% +\def\defmacro{% + \let\hash=##% convert placeholders to macro parameter chars + \ifnum\paramno=1 + \def\processmacroarg{\gobblespaces}% + % This removes the pair of braces around the argument. We don't + % use \eatspaces, because this can cause ends of lines to be lost + % when the argument to \eatspaces is read, leading to line-based + % commands like "@itemize" not being read correctly. + \else + \def\processmacroarg{\xprocessmacroarg}% + \let\xprocessmacroarg\relax + \fi + \ifrecursive %%%%%%%%%%%%%% Recursive %%%%%%%%%%%%%%%%%%%%%%%%%%%%% + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\scanmacro{\macrobody}}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname @@@\endcsname}% + \expandafter\xdef\csname\the\macname @@@\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@@\endcsname{% + \noexpand\gobblespaces##1\empty}% + % The \empty is for \gobblespaces in case #1 is empty + }% + \expandafter\xdef\csname\the\macname @@@@\endcsname##1{% + \egroup\noexpand\scanmacro{\macrobody}}% + \else + \ifnum\paramno<10\relax % at most 9 + % See non-recursive section below for comments + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup + \noexpand\expandafter + \noexpand\macroargctxt + \noexpand\expandafter + \expandafter\noexpand\csname\the\macname @@\endcsname}% + \expandafter\xdef\csname\the\macname @@\endcsname##1{% + \noexpand\passargtomacro + \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}% + \expandafter\xdef\csname\the\macname @@@\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname @@@@\endcsname\paramlist{% + \egroup\noexpand\scanmacro{\macrobody}}% + \else % 10 or more + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\getargvals@{\the\macname}{\argl}% + }% + \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody + \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble + \fi + \fi + \else %%%%%%%%%%%%%%%%%%%%%% Non-recursive %%%%%%%%%%%%%%%%%%%%%%%%%% + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\scanmacro{\macrobody}}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname @@@\endcsname}% + \expandafter\xdef\csname\the\macname @@@\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@@\endcsname{% + \noexpand\gobblespaces##1\empty}% + % The \empty is for \gobblespaces in case #1 is empty + }% + \expandafter\xdef\csname\the\macname @@@@\endcsname##1{% + \egroup + \noexpand\scanmacro{\macrobody}% + }% + \else % at most 9 + \ifnum\paramno<10\relax + % @MACNAME sets the context for reading the macro argument + % @MACNAME@@ gets the argument, processes backslashes and appends a + % comma. + % @MACNAME@@@ removes braces surrounding the argument list. + % @MACNAME@@@@ scans the macro body with arguments substituted. + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup + \noexpand\expandafter % This \expandafter skip any spaces after the + \noexpand\macroargctxt % macro before we change the catcode of space. + \noexpand\expandafter + \expandafter\noexpand\csname\the\macname @@\endcsname}% + \expandafter\xdef\csname\the\macname @@\endcsname##1{% + \noexpand\passargtomacro + \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}% + \expandafter\xdef\csname\the\macname @@@\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname @@@@\endcsname\paramlist{% + \egroup\noexpand\scanmacro{\macrobody}}% + \else % 10 or more: + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\getargvals@{\the\macname}{\argl}% + }% + \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody + \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse + \fi + \fi + \fi} + +\catcode `\@\texiatcatcode\relax % end private-to-Texinfo catcodes + +\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% +{\catcode`\@=0 \catcode`\\=13 % We need to manipulate \ so use @ as escape +@catcode`@_=11 % private names +@catcode`@!=11 % used as argument separator + +% \passargtomacro#1#2 - +% Call #1 with a list of tokens #2, with any doubled backslashes in #2 +% compressed to one. +% +% This implementation works by expansion, and not execution (so we cannot use +% \def or similar). This reduces the risk of this failing in contexts where +% complete expansion is done with no execution (for example, in writing out to +% an auxiliary file for an index entry). +% +% State is kept in the input stream: the argument passed to +% @look_ahead, @gobble_and_check_finish and @add_segment is +% +% THE_MACRO ARG_RESULT ! {PENDING_BS} NEXT_TOKEN (... rest of input) +% +% where: +% THE_MACRO - name of the macro we want to call +% ARG_RESULT - argument list we build to pass to that macro +% PENDING_BS - either a backslash or nothing +% NEXT_TOKEN - used to look ahead in the input stream to see what's coming next + +@gdef@passargtomacro#1#2{% + @add_segment #1!{}@relax#2\@_finish\% +} +@gdef@_finish{@_finishx} @global@let@_finishx@relax + +% #1 - THE_MACRO ARG_RESULT +% #2 - PENDING_BS +% #3 - NEXT_TOKEN +% #4 used to look ahead +% +% If the next token is not a backslash, process the rest of the argument; +% otherwise, remove the next token. +@gdef@look_ahead#1!#2#3#4{% + @ifx#4\% + @expandafter@gobble_and_check_finish + @else + @expandafter@add_segment + @fi#1!{#2}#4#4% +} + +% #1 - THE_MACRO ARG_RESULT +% #2 - PENDING_BS +% #3 - NEXT_TOKEN +% #4 should be a backslash, which is gobbled. +% #5 looks ahead +% +% Double backslash found. Add a single backslash, and look ahead. +@gdef@gobble_and_check_finish#1!#2#3#4#5{% + @add_segment#1\!{}#5#5% +} + +@gdef@is_fi{@fi} + +% #1 - THE_MACRO ARG_RESULT +% #2 - PENDING_BS +% #3 - NEXT_TOKEN +% #4 is input stream until next backslash +% +% Input stream is either at the start of the argument, or just after a +% backslash sequence, either a lone backslash, or a doubled backslash. +% NEXT_TOKEN contains the first token in the input stream: if it is \finish, +% finish; otherwise, append to ARG_RESULT the segment of the argument up until +% the next backslash. PENDING_BACKSLASH contains a backslash to represent +% a backslash just before the start of the input stream that has not been +% added to ARG_RESULT. +@gdef@add_segment#1!#2#3#4\{% +@ifx#3@_finish + @call_the_macro#1!% +@else + % append the pending backslash to the result, followed by the next segment + @expandafter@is_fi@look_ahead#1#2#4!{\}@fi + % this @fi is discarded by @look_ahead. + % we can't get rid of it with \expandafter because we don't know how + % long #4 is. +} + +% #1 - THE_MACRO +% #2 - ARG_RESULT +% #3 discards the res of the conditional in @add_segment, and @is_fi ends the +% conditional. +@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}} + +} +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% \braceorline MAC is used for a one-argument macro MAC. It checks +% whether the next non-whitespace character is a {. It sets the context +% for reading the argument (slightly different in the two cases). Then, +% to read the argument, in the whole-line case, it then calls the regular +% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC. +% +\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} +\def\braceorlinexxx{% + \ifx\nchar\bgroup + \macroargctxt + \expandafter\passargtomacro + \else + \macrolineargctxt\expandafter\parsearg + \fi \macnamexxx} + + +% @alias. +% We need some trickery to remove the optional spaces around the equal +% sign. Make them active and then expand them all to nothing. +% +\def\alias{\parseargusing\obeyspaces\aliasxxx} +\def\aliasxxx #1{\aliasyyy#1\relax} +\def\aliasyyy #1=#2\relax{% + {% + \expandafter\let\obeyedspace=\empty + \addtomacrolist{#1}% + \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% + }% + \next +} + + +\message{cross references,} + +\newwrite\auxfile +\newif\ifhavexrefs % True if xref values are known. +\newif\ifwarnedxrefs % True if we warned once that they aren't known. + +% @inforef is relatively simple. +\def\inforef #1{\inforefzzz #1,,,,**} +\def\inforefzzz #1,#2,#3,#4**{% + \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, + node \samp{\ignorespaces#1{}}} + +% @node's only job in TeX is to define \lastnode, which is used in +% cross-references. The @node line might or might not have commas, and +% might or might not have spaces before the first comma, like: +% @node foo , bar , ... +% We don't want such trailing spaces in the node name. +% +\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse} +% +% also remove a trailing comma, in case of something like this: +% @node Help-Cross, , , Cross-refs +\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} +\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} + +\let\nwnode=\node +\let\lastnode=\empty + +% Write a cross-reference definition for the current node. #1 is the +% type (Ynumbered, Yappendix, Ynothing). +% +\def\donoderef#1{% + \ifx\lastnode\empty\else + \setref{\lastnode}{#1}% + \global\let\lastnode=\empty + \fi +} + +% @anchor{NAME} -- define xref target at arbitrary point. +% +\newcount\savesfregister +% +\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} + +% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an +% anchor), which consists of three parts: +% 1) NAME-title - the current sectioning name taken from \lastsection, +% or the anchor name. +% 2) NAME-snt - section number and type, passed as the SNT arg, or +% empty for anchors. +% 3) NAME-pg - the page number. +% +% This is called from \donoderef, \anchor, and \dofloat. In the case of +% floats, there is an additional part, which is not written here: +% 4) NAME-lof - the text as it should appear in a @listoffloats. +% +\def\setref#1#2{% + \pdfmkdest{#1}% + \iflinks + {% + \requireauxfile + \atdummies % preserve commands, but don't expand them + \edef\writexrdef##1##2{% + \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef + ##1}{##2}}% these are parameters of \writexrdef + }% + \toks0 = \expandafter{\lastsection}% + \immediate \writexrdef{title}{\the\toks0 }% + \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. + \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout + }% + \fi +} + +% @xrefautosectiontitle on|off says whether @section(ing) names are used +% automatically in xrefs, if the third arg is not explicitly specified. +% This was provided as a "secret" @set xref-automatic-section-title +% variable, now it's official. +% +\parseargdef\xrefautomaticsectiontitle{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @xrefautomaticsectiontitle value `\temp', + must be on|off}% + \fi\fi +} + +% +% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is +% the node name, #2 the name of the Info cross-reference, #3 the printed +% node name, #4 the name of the Info file, #5 the name of the printed +% manual. All but the node name can be omitted. +% +\def\pxref{\putwordsee{} \xrefXX} +\def\xref{\putwordSee{} \xrefXX} +\def\ref{\xrefXX} + +\def\xrefXX#1{\def\xrefXXarg{#1}\futurelet\tokenafterxref\xrefXXX} +\def\xrefXXX{\expandafter\xrefX\expandafter[\xrefXXarg,,,,,,,]} +% +\newbox\toprefbox +\newbox\printedrefnamebox +\newbox\infofilenamebox +\newbox\printedmanualbox +% +\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup + \unsepspaces + % + % Get args without leading/trailing spaces. + \def\printedrefname{\ignorespaces #3}% + \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}% + % + \def\infofilename{\ignorespaces #4}% + \setbox\infofilenamebox = \hbox{\infofilename\unskip}% + % + \def\printedmanual{\ignorespaces #5}% + \setbox\printedmanualbox = \hbox{\printedmanual\unskip}% + % + % If the printed reference name (arg #3) was not explicitly given in + % the @xref, figure out what we want to use. + \ifdim \wd\printedrefnamebox = 0pt + % No printed node name was explicitly given. + \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax + % Not auto section-title: use node name inside the square brackets. + \def\printedrefname{\ignorespaces #1}% + \else + % Auto section-title: use chapter/section title inside + % the square brackets if we have it. + \ifdim \wd\printedmanualbox > 0pt + % It is in another manual, so we don't have it; use node name. + \def\printedrefname{\ignorespaces #1}% + \else + \ifhavexrefs + % We (should) know the real title if we have the xref values. + \def\printedrefname{\refx{#1-title}{}}% + \else + % Otherwise just copy the Info node name. + \def\printedrefname{\ignorespaces #1}% + \fi% + \fi + \fi + \fi + % + % Make link in pdf output. + \ifpdf + {\indexnofonts + \turnoffactive + \makevalueexpandable + % This expands tokens, so do it after making catcode changes, so _ + % etc. don't get their TeX definitions. This ignores all spaces in + % #4, including (wrongly) those in the middle of the filename. + \getfilename{#4}% + % + % This (wrongly) does not take account of leading or trailing + % spaces in #1, which should be ignored. + \edef\pdfxrefdest{#1}% + \ifx\pdfxrefdest\empty + \def\pdfxrefdest{Top}% no empty targets + \else + \txiescapepdf\pdfxrefdest % escape PDF special chars + \fi + % + \leavevmode + \startlink attr{/Border [0 0 0]}% + \ifnum\filenamelength>0 + goto file{\the\filename.pdf} name{\pdfxrefdest}% + \else + goto name{\pdfmkpgn{\pdfxrefdest}}% + \fi + }% + \setcolor{\linkcolor}% + \fi + % + % Float references are printed completely differently: "Figure 1.2" + % instead of "[somenode], p.3". We distinguish them by the + % LABEL-title being set to a magic string. + {% + % Have to otherify everything special to allow the \csname to + % include an _ in the xref name, etc. + \indexnofonts + \turnoffactive + \expandafter\global\expandafter\let\expandafter\Xthisreftitle + \csname XR#1-title\endcsname + }% + \iffloat\Xthisreftitle + % If the user specified the print name (third arg) to the ref, + % print it instead of our usual "Figure 1.2". + \ifdim\wd\printedrefnamebox = 0pt + \refx{#1-snt}{}% + \else + \printedrefname + \fi + % + % If the user also gave the printed manual name (fifth arg), append + % "in MANUALNAME". + \ifdim \wd\printedmanualbox > 0pt + \space \putwordin{} \cite{\printedmanual}% + \fi + \else + % node/anchor (non-float) references. + % + % If we use \unhbox to print the node names, TeX does not insert + % empty discretionaries after hyphens, which means that it will not + % find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, + % this is a loss. Therefore, we give the text of the node name + % again, so it is as if TeX is seeing it for the first time. + % + \ifdim \wd\printedmanualbox > 0pt + % Cross-manual reference with a printed manual name. + % + \crossmanualxref{\cite{\printedmanual\unskip}}% + % + \else\ifdim \wd\infofilenamebox > 0pt + % Cross-manual reference with only an info filename (arg 4), no + % printed manual name (arg 5). This is essentially the same as + % the case above; we output the filename, since we have nothing else. + % + \crossmanualxref{\code{\infofilename\unskip}}% + % + \else + % Reference within this manual. + % + % _ (for example) has to be the character _ for the purposes of the + % control sequence corresponding to the node, but it has to expand + % into the usual \leavevmode...\vrule stuff for purposes of + % printing. So we \turnoffactive for the \refx-snt, back on for the + % printing, back off for the \refx-pg. + {\turnoffactive + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + }% + % output the `[mynode]' via the macro below so it can be overridden. + \xrefprintnodename\printedrefname + % + % But we always want a comma and a space: + ,\space + % + % output the `page 3'. + \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + \ifx,\tokenafterxref + \else\ifx.\tokenafterxref + \else\ifx;\tokenafterxref + \else\ifx)\tokenafterxref + \else,% add a , if xref not followed by punctuation + \fi\fi\fi\fi + \fi\fi + \fi + \endlink +\endgroup} + +% Output a cross-manual xref to #1. Used just above (twice). +% +% Only include the text "Section ``foo'' in" if the foo is neither +% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply +% "see The Foo Manual", the idea being to refer to the whole manual. +% +% But, this being TeX, we can't easily compare our node name against the +% string "Top" while ignoring the possible spaces before and after in +% the input. By adding the arbitrary 7sp below, we make it much less +% likely that a real node name would have the same width as "Top" (e.g., +% in a monospaced font). Hopefully it will never happen in practice. +% +% For the same basic reason, we retypeset the "Top" at every +% reference, since the current font is indeterminate. +% +\def\crossmanualxref#1{% + \setbox\toprefbox = \hbox{Top\kern7sp}% + \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% + \ifdim \wd2 > 7sp % nonempty? + \ifdim \wd2 = \wd\toprefbox \else % same as Top? + \putwordSection{} ``\printedrefname'' \putwordin{}\space + \fi + \fi + #1% +} + +% This macro is called from \xrefX for the `[nodename]' part of xref +% output. It's a separate macro only so it can be changed more easily, +% since square brackets don't work well in some documents. Particularly +% one that Bob is working on :). +% +\def\xrefprintnodename#1{[#1]} + +% Things referred to by \setref. +% +\def\Ynothing{} +\def\Yomitfromtoc{} +\def\Ynumbered{% + \ifnum\secno=0 + \putwordChapter@tie \the\chapno + \else \ifnum\subsecno=0 + \putwordSection@tie \the\chapno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno + \else + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} +\def\Yappendix{% + \ifnum\secno=0 + \putwordAppendix@tie @char\the\appendixno{}% + \else \ifnum\subsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno + \else + \putwordSection@tie + @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} + +% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. +% If its value is nonempty, SUFFIX is output afterward. +% +\def\refx#1#2{% + \requireauxfile + {% + \indexnofonts + \otherbackslash + \expandafter\global\expandafter\let\expandafter\thisrefX + \csname XR#1\endcsname + }% + \ifx\thisrefX\relax + % If not defined, say something at least. + \angleleft un\-de\-fined\angleright + \iflinks + \ifhavexrefs + {\toks0 = {#1}% avoid expansion of possibly-complex value + \message{\linenumber Undefined cross reference `\the\toks0'.}}% + \else + \ifwarnedxrefs\else + \global\warnedxrefstrue + \message{Cross reference values unknown; you must run TeX again.}% + \fi + \fi + \fi + \else + % It's defined, so just use it. + \thisrefX + \fi + #2% Output the suffix in any case. +} + +% This is the macro invoked by entries in the aux file. Usually it's +% just a \def (we prepend XR to the control sequence name to avoid +% collisions). But if this is a float type, we have more work to do. +% +\def\xrdef#1#2{% + {% The node name might contain 8-bit characters, which in our current + % implementation are changed to commands like @'e. Don't let these + % mess up the control sequence name. + \indexnofonts + \turnoffactive + \xdef\safexrefname{#1}% + }% + % + \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref + % + % Was that xref control sequence that we just defined for a float? + \expandafter\iffloat\csname XR\safexrefname\endcsname + % it was a float, and we have the (safe) float type in \iffloattype. + \expandafter\let\expandafter\floatlist + \csname floatlist\iffloattype\endcsname + % + % Is this the first time we've seen this float type? + \expandafter\ifx\floatlist\relax + \toks0 = {\do}% yes, so just \do + \else + % had it before, so preserve previous elements in list. + \toks0 = \expandafter{\floatlist\do}% + \fi + % + % Remember this xref in the control sequence \floatlistFLOATTYPE, + % for later use in \listoffloats. + \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0 + {\safexrefname}}% + \fi +} + +% If working on a large document in chapters, it is convenient to +% be able to disable indexing, cross-referencing, and contents, for test runs. +% This is done with @novalidate at the beginning of the file. +% +\newif\iflinks \linkstrue % by default we want the aux files. +\let\novalidate = \linksfalse + +% Used when writing to the aux file, or when using data from it. +\def\requireauxfile{% + \iflinks + \tryauxfile + % Open the new aux file. TeX will close it automatically at exit. + \immediate\openout\auxfile=\jobname.aux + \fi + \global\let\requireauxfile=\relax % Only do this once. +} + +% Read the last existing aux file, if any. No error if none exists. +% +\def\tryauxfile{% + \openin 1 \jobname.aux + \ifeof 1 \else + \readdatafile{aux}% + \global\havexrefstrue + \fi + \closein 1 +} + +\def\setupdatafile{% + \catcode`\^^@=\other + \catcode`\^^A=\other + \catcode`\^^B=\other + \catcode`\^^C=\other + \catcode`\^^D=\other + \catcode`\^^E=\other + \catcode`\^^F=\other + \catcode`\^^G=\other + \catcode`\^^H=\other + \catcode`\^^K=\other + \catcode`\^^L=\other + \catcode`\^^N=\other + \catcode`\^^P=\other + \catcode`\^^Q=\other + \catcode`\^^R=\other + \catcode`\^^S=\other + \catcode`\^^T=\other + \catcode`\^^U=\other + \catcode`\^^V=\other + \catcode`\^^W=\other + \catcode`\^^X=\other + \catcode`\^^Z=\other + \catcode`\^^[=\other + \catcode`\^^\=\other + \catcode`\^^]=\other + \catcode`\^^^=\other + \catcode`\^^_=\other + % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc. + % in xref tags, i.e., node names. But since ^^e4 notation isn't + % supported in the main text, it doesn't seem desirable. Furthermore, + % that is not enough: for node names that actually contain a ^ + % character, we would end up writing a line like this: 'xrdef {'hat + % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first + % argument, and \hat is not an expandable control sequence. It could + % all be worked out, but why? Either we support ^^ or we don't. + % + % The other change necessary for this was to define \auxhat: + % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter + % and then to call \auxhat in \setq. + % + \catcode`\^=\other + % + % Special characters. Should be turned off anyway, but... + \catcode`\~=\other + \catcode`\[=\other + \catcode`\]=\other + \catcode`\"=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\$=\other + \catcode`\#=\other + \catcode`\&=\other + \catcode`\%=\other + \catcode`+=\other % avoid \+ for paranoia even though we've turned it off + % + % This is to support \ in node names and titles, since the \ + % characters end up in a \csname. It's easier than + % leaving it active and making its active definition an actual \ + % character. What I don't understand is why it works in the *value* + % of the xrdef. Seems like it should be a catcode12 \, and that + % should not typeset properly. But it works, so I'm moving on for + % now. --karl, 15jan04. + \catcode`\\=\other + % + % Make the characters 128-255 be printing characters. + {\setnonasciicharscatcodenonglobal\other}% + % + % @ is our escape character in .aux files, and we need braces. + \catcode`\{=1 + \catcode`\}=2 + \catcode`\@=0 +} + +\def\readdatafile#1{% +\begingroup + \setupdatafile + \input\jobname.#1 +\endgroup} + + +\message{insertions,} +% including footnotes. + +\newcount \footnoteno + +% The trailing space in the following definition for supereject is +% vital for proper filling; pages come out unaligned when you do a +% pagealignmacro call if that space before the closing brace is +% removed. (Generally, numeric constants should always be followed by a +% space to prevent strange expansion errors.) +\def\supereject{\par\penalty -20000\footnoteno =0 } + +% @footnotestyle is meaningful for Info output only. +\let\footnotestyle=\comment + +{\catcode `\@=11 +% +% Auto-number footnotes. Otherwise like plain. +\gdef\footnote{% + \global\advance\footnoteno by \@ne + \edef\thisfootno{$^{\the\footnoteno}$}% + % + % In case the footnote comes at the end of a sentence, preserve the + % extra spacing after we do the footnote number. + \let\@sf\empty + \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi + % + % Remove inadvertent blank space before typesetting the footnote number. + \unskip + \thisfootno\@sf + \dofootnote +}% + +% Don't bother with the trickery in plain.tex to not require the +% footnote text as a parameter. Our footnotes don't need to be so general. +% +% Oh yes, they do; otherwise, @ifset (and anything else that uses +% \parseargline) fails inside footnotes because the tokens are fixed when +% the footnote is read. --karl, 16nov96. +% +\gdef\dofootnote{% + \insert\footins\bgroup + % + % Nested footnotes are not supported in TeX, that would take a lot + % more work. (\startsavinginserts does not suffice.) + \let\footnote=\errfootnotenest + % + % We want to typeset this text as a normal paragraph, even if the + % footnote reference occurs in (for example) a display environment. + % So reset some parameters. + \hsize=\pagewidth + \interlinepenalty\interfootnotelinepenalty + \splittopskip\ht\strutbox % top baseline for broken footnotes + \splitmaxdepth\dp\strutbox + \floatingpenalty\@MM + \leftskip\z@skip + \rightskip\z@skip + \spaceskip\z@skip + \xspaceskip\z@skip + \parindent\defaultparindent + % + \smallfonts \rm + % + % Because we use hanging indentation in footnotes, a @noindent appears + % to exdent this text, so make it be a no-op. makeinfo does not use + % hanging indentation so @noindent can still be needed within footnote + % text after an @example or the like (not that this is good style). + \let\noindent = \relax + % + % Hang the footnote text off the number. Use \everypar in case the + % footnote extends for more than one paragraph. + \everypar = {\hang}% + \textindent{\thisfootno}% + % + % Don't crash into the line above the footnote text. Since this + % expands into a box, it must come within the paragraph, lest it + % provide a place where TeX can split the footnote. + \footstrut + % + % Invoke rest of plain TeX footnote routine. + \futurelet\next\fo@t +} +}%end \catcode `\@=11 + +\def\errfootnotenest{% + \errhelp=\EMsimple + \errmessage{Nested footnotes not supported in texinfo.tex, + even though they work in makeinfo; sorry} +} + +\def\errfootnoteheading{% + \errhelp=\EMsimple + \errmessage{Footnotes in chapters, sections, etc., are not supported} +} + +% In case a @footnote appears in a vbox, save the footnote text and create +% the real \insert just after the vbox finished. Otherwise, the insertion +% would be lost. +% Similarly, if a @footnote appears inside an alignment, save the footnote +% text to a box and make the \insert when a row of the table is finished. +% And the same can be done for other insert classes. --kasal, 16nov03. +% +% Replace the \insert primitive by a cheating macro. +% Deeper inside, just make sure that the saved insertions are not spilled +% out prematurely. +% +\def\startsavinginserts{% + \ifx \insert\ptexinsert + \let\insert\saveinsert + \else + \let\checkinserts\relax + \fi +} + +% This \insert replacement works for both \insert\footins{foo} and +% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}. +% +\def\saveinsert#1{% + \edef\next{\noexpand\savetobox \makeSAVEname#1}% + \afterassignment\next + % swallow the left brace + \let\temp = +} +\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}} +\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1} + +\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi} + +\def\placesaveins#1{% + \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname + {\box#1}% +} + +% eat @SAVE -- beware, all of them have catcode \other: +{ + \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-) + \gdef\gobblesave @SAVE{} +} + +% initialization: +\def\newsaveins #1{% + \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}% + \next +} +\def\newsaveinsX #1{% + \csname newbox\endcsname #1% + \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts + \checksaveins #1}% +} + +% initialize: +\let\checkinserts\empty +\newsaveins\footins +\newsaveins\margin + + +% @image. We use the macros from epsf.tex to support this. +% If epsf.tex is not installed and @image is used, we complain. +% +% Check for and read epsf.tex up front. If we read it only at @image +% time, we might be inside a group, and then its definitions would get +% undone and the next image would fail. +\openin 1 = epsf.tex +\ifeof 1 \else + % Do not bother showing banner with epsf.tex v2.7k (available in + % doc/epsf.tex and on ctan). + \def\epsfannounce{\toks0 = }% + \input epsf.tex +\fi +\closein 1 +% +% We will only complain once about lack of epsf.tex. +\newif\ifwarnednoepsf +\newhelp\noepsfhelp{epsf.tex must be installed for images to + work. It is also included in the Texinfo distribution, or you can get + it from ftp://tug.org/tex/epsf.tex.} +% +\def\image#1{% + \ifx\epsfbox\thisisundefined + \ifwarnednoepsf \else + \errhelp = \noepsfhelp + \errmessage{epsf.tex not found, images will be ignored}% + \global\warnednoepsftrue + \fi + \else + \imagexxx #1,,,,,\finish + \fi +} +% +% Arguments to @image: +% #1 is (mandatory) image filename; we tack on .eps extension. +% #2 is (optional) width, #3 is (optional) height. +% #4 is (ignored optional) html alt text. +% #5 is (ignored optional) extension. +% #6 is just the usual extra ignored arg for parsing stuff. +\newif\ifimagevmode +\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup + \catcode`\^^M = 5 % in case we're inside an example + \normalturnoffactive % allow _ et al. in names + \def\xprocessmacroarg{\eatspaces}% in case we are being used via a macro + % If the image is by itself, center it. + \ifvmode + \imagevmodetrue + \else \ifx\centersub\centerV + % for @center @image, we need a vbox so we can have our vertical space + \imagevmodetrue + \vbox\bgroup % vbox has better behavior than vtop herev + \fi\fi + % + \ifimagevmode + \nobreak\medskip + % Usually we'll have text after the image which will insert + % \parskip glue, so insert it here too to equalize the space + % above and below. + \nobreak\vskip\parskip + \nobreak + \fi + % + % Leave vertical mode so that indentation from an enclosing + % environment such as @quotation is respected. + % However, if we're at the top level, we don't want the + % normal paragraph indentation. + % On the other hand, if we are in the case of @center @image, we don't + % want to start a paragraph, which will create a hsize-width box and + % eradicate the centering. + \ifx\centersub\centerV\else \noindent \fi + % + % Output the image. + \ifpdf + \dopdfimage{#1}{#2}{#3}% + \else + % \epsfbox itself resets \epsf?size at each figure. + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi + \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi + \epsfbox{#1.eps}% + \fi + % + \ifimagevmode + \medskip % space after a standalone image + \fi + \ifx\centersub\centerV \egroup \fi +\endgroup} + + +% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables, +% etc. We don't actually implement floating yet, we always include the +% float "here". But it seemed the best name for the future. +% +\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish} + +% There may be a space before second and/or third parameter; delete it. +\def\eatcommaspace#1, {#1,} + +% #1 is the optional FLOATTYPE, the text label for this float, typically +% "Figure", "Table", "Example", etc. Can't contain commas. If omitted, +% this float will not be numbered and cannot be referred to. +% +% #2 is the optional xref label. Also must be present for the float to +% be referable. +% +% #3 is the optional positioning argument; for now, it is ignored. It +% will somehow specify the positions allowed to float to (here, top, bottom). +% +% We keep a separate counter for each FLOATTYPE, which we reset at each +% chapter-level command. +\let\resetallfloatnos=\empty +% +\def\dofloat#1,#2,#3,#4\finish{% + \let\thiscaption=\empty + \let\thisshortcaption=\empty + % + % don't lose footnotes inside @float. + % + % BEWARE: when the floats start float, we have to issue warning whenever an + % insert appears inside a float which could possibly float. --kasal, 26may04 + % + \startsavinginserts + % + % We can't be used inside a paragraph. + \par + % + \vtop\bgroup + \def\floattype{#1}% + \def\floatlabel{#2}% + \def\floatloc{#3}% we do nothing with this yet. + % + \ifx\floattype\empty + \let\safefloattype=\empty + \else + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + \fi + % + % If label is given but no type, we handle that as the empty type. + \ifx\floatlabel\empty \else + % We want each FLOATTYPE to be numbered separately (Figure 1, + % Table 1, Figure 2, ...). (And if no label, no number.) + % + \expandafter\getfloatno\csname\safefloattype floatno\endcsname + \global\advance\floatno by 1 + % + {% + % This magic value for \lastsection is output by \setref as the + % XREFLABEL-title value. \xrefX uses it to distinguish float + % labels (which have a completely different output format) from + % node and anchor labels. And \xrdef uses it to construct the + % lists of floats. + % + \edef\lastsection{\floatmagic=\safefloattype}% + \setref{\floatlabel}{Yfloat}% + }% + \fi + % + % start with \parskip glue, I guess. + \vskip\parskip + % + % Don't suppress indentation if a float happens to start a section. + \restorefirstparagraphindent +} + +% we have these possibilities: +% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap +% @float Foo,lbl & no caption: Foo 1.1 +% @float Foo & @caption{Cap}: Foo: Cap +% @float Foo & no caption: Foo +% @float ,lbl & Caption{Cap}: 1.1: Cap +% @float ,lbl & no caption: 1.1 +% @float & @caption{Cap}: Cap +% @float & no caption: +% +\def\Efloat{% + \let\floatident = \empty + % + % In all cases, if we have a float type, it comes first. + \ifx\floattype\empty \else \def\floatident{\floattype}\fi + % + % If we have an xref label, the number comes next. + \ifx\floatlabel\empty \else + \ifx\floattype\empty \else % if also had float type, need tie first. + \appendtomacro\floatident{\tie}% + \fi + % the number. + \appendtomacro\floatident{\chaplevelprefix\the\floatno}% + \fi + % + % Start the printed caption with what we've constructed in + % \floatident, but keep it separate; we need \floatident again. + \let\captionline = \floatident + % + \ifx\thiscaption\empty \else + \ifx\floatident\empty \else + \appendtomacro\captionline{: }% had ident, so need a colon between + \fi + % + % caption text. + \appendtomacro\captionline{\scanexp\thiscaption}% + \fi + % + % If we have anything to print, print it, with space before. + % Eventually this needs to become an \insert. + \ifx\captionline\empty \else + \vskip.5\parskip + \captionline + % + % Space below caption. + \vskip\parskip + \fi + % + % If have an xref label, write the list of floats info. Do this + % after the caption, to avoid chance of it being a breakpoint. + \ifx\floatlabel\empty \else + % Write the text that goes in the lof to the aux file as + % \floatlabel-lof. Besides \floatident, we include the short + % caption if specified, else the full caption if specified, else nothing. + {% + \requireauxfile + \atdummies + % + % since we read the caption text in the macro world, where ^^M + % is turned into a normal character, we have to scan it back, so + % we don't write the literal three characters "^^M" into the aux file. + \scanexp{% + \xdef\noexpand\gtemp{% + \ifx\thisshortcaption\empty + \thiscaption + \else + \thisshortcaption + \fi + }% + }% + \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident + \ifx\gtemp\empty \else : \gtemp \fi}}% + }% + \fi + \egroup % end of \vtop + % + % place the captured inserts + % + % BEWARE: when the floats start floating, we have to issue warning + % whenever an insert appears inside a float which could possibly + % float. --kasal, 26may04 + % + \checkinserts +} + +% Append the tokens #2 to the definition of macro #1, not expanding either. +% +\def\appendtomacro#1#2{% + \expandafter\def\expandafter#1\expandafter{#1#2}% +} + +% @caption, @shortcaption +% +\def\caption{\docaption\thiscaption} +\def\shortcaption{\docaption\thisshortcaption} +\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption} +\def\defcaption#1#2{\egroup \def#1{#2}} + +% The parameter is the control sequence identifying the counter we are +% going to use. Create it if it doesn't exist and assign it to \floatno. +\def\getfloatno#1{% + \ifx#1\relax + % Haven't seen this figure type before. + \csname newcount\endcsname #1% + % + % Remember to reset this floatno at the next chap. + \expandafter\gdef\expandafter\resetallfloatnos + \expandafter{\resetallfloatnos #1=0 }% + \fi + \let\floatno#1% +} + +% \setref calls this to get the XREFLABEL-snt value. We want an @xref +% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we +% first read the @float command. +% +\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% + +% Magic string used for the XREFLABEL-title value, so \xrefX can +% distinguish floats from other xref types. +\def\floatmagic{!!float!!} + +% #1 is the control sequence we are passed; we expand into a conditional +% which is true if #1 represents a float ref. That is, the magic +% \lastsection value which we \setref above. +% +\def\iffloat#1{\expandafter\doiffloat#1==\finish} +% +% #1 is (maybe) the \floatmagic string. If so, #2 will be the +% (safe) float type for this float. We set \iffloattype to #2. +% +\def\doiffloat#1=#2=#3\finish{% + \def\temp{#1}% + \def\iffloattype{#2}% + \ifx\temp\floatmagic +} + +% @listoffloats FLOATTYPE - print a list of floats like a table of contents. +% +\parseargdef\listoffloats{% + \def\floattype{#1}% floattype + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + % + % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE. + \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax + \ifhavexrefs + % if the user said @listoffloats foo but never @float foo. + \message{\linenumber No `\safefloattype' floats to list.}% + \fi + \else + \begingroup + \leftskip=\tocindent % indent these entries like a toc + \let\do=\listoffloatsdo + \csname floatlist\safefloattype\endcsname + \endgroup + \fi +} + +% This is called on each entry in a list of floats. We're passed the +% xref label, in the form LABEL-title, which is how we save it in the +% aux file. We strip off the -title and look up \XRLABEL-lof, which +% has the text we're supposed to typeset here. +% +% Figures without xref labels will not be included in the list (since +% they won't appear in the aux file). +% +\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} +\def\listoffloatsdoentry#1-title\finish{{% + % Can't fully expand XR#1-lof because it can contain anything. Just + % pass the control sequence. On the other hand, XR#1-pg is just the + % page number, and we want to fully expand that so we can get a link + % in pdf output. + \toksA = \expandafter{\csname XR#1-lof\endcsname}% + % + % use the same \entry macro we use to generate the TOC and index. + \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}% + \writeentry +}} + + +\message{localization,} + +% For single-language documents, @documentlanguage is usually given very +% early, just after @documentencoding. Single argument is the language +% (de) or locale (de_DE) abbreviation. +% +{ + \catcode`\_ = \active + \globaldefs=1 +\parseargdef\documentlanguage{% + \tex % read txi-??.tex file in plain TeX. + % Read the file by the name they passed if it exists. + \let_ = \normalunderscore % normal _ character for filename test + \openin 1 txi-#1.tex + \ifeof 1 + \documentlanguagetrywithoutunderscore #1_\finish + \else + \globaldefs = 1 % everything in the txi-LL files needs to persist + \input txi-#1.tex + \fi + \closein 1 + \endgroup % end raw TeX +} +% +% If they passed de_DE, and txi-de_DE.tex doesn't exist, +% try txi-de.tex. +% +\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{% + \openin 1 txi-#1.tex + \ifeof 1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \else + \globaldefs = 1 % everything in the txi-LL files needs to persist + \input txi-#1.tex + \fi + \closein 1 +} +}% end of special _ catcode +% +\newhelp\nolanghelp{The given language definition file cannot be found or +is empty. Maybe you need to install it? Putting it in the current +directory should work if nowhere else does.} + +% This macro is called from txi-??.tex files; the first argument is the +% \language name to set (without the "\lang@" prefix), the second and +% third args are \{left,right}hyphenmin. +% +% The language names to pass are determined when the format is built. +% See the etex.log file created at that time, e.g., +% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log. +% +% With TeX Live 2008, etex now includes hyphenation patterns for all +% available languages. This means we can support hyphenation in +% Texinfo, at least to some extent. (This still doesn't solve the +% accented characters problem.) +% +\catcode`@=11 +\def\txisetlanguage#1#2#3{% + % do not set the language if the name is undefined in the current TeX. + \expandafter\ifx\csname lang@#1\endcsname \relax + \message{no patterns for #1}% + \else + \global\language = \csname lang@#1\endcsname + \fi + % but there is no harm in adjusting the hyphenmin values regardless. + \global\lefthyphenmin = #2\relax + \global\righthyphenmin = #3\relax +} + +% Helpers for encodings. +% Set the catcode of characters 128 through 255 to the specified number. +% +\def\setnonasciicharscatcode#1{% + \count255=128 + \loop\ifnum\count255<256 + \global\catcode\count255=#1\relax + \advance\count255 by 1 + \repeat +} + +\def\setnonasciicharscatcodenonglobal#1{% + \count255=128 + \loop\ifnum\count255<256 + \catcode\count255=#1\relax + \advance\count255 by 1 + \repeat +} + +% @documentencoding sets the definition of non-ASCII characters +% according to the specified encoding. +% +\def\documentencoding{\parseargusing\filenamecatcodes\documentencodingzzz} +\def\documentencodingzzz#1{% + % Encoding being declared for the document. + \def\declaredencoding{\csname #1.enc\endcsname}% + % + % Supported encodings: names converted to tokens in order to be able + % to compare them with \ifx. + \def\ascii{\csname US-ASCII.enc\endcsname}% + \def\latnine{\csname ISO-8859-15.enc\endcsname}% + \def\latone{\csname ISO-8859-1.enc\endcsname}% + \def\lattwo{\csname ISO-8859-2.enc\endcsname}% + \def\utfeight{\csname UTF-8.enc\endcsname}% + % + \ifx \declaredencoding \ascii + \asciichardefs + % + \else \ifx \declaredencoding \lattwo + \setnonasciicharscatcode\active + \lattwochardefs + % + \else \ifx \declaredencoding \latone + \setnonasciicharscatcode\active + \latonechardefs + % + \else \ifx \declaredencoding \latnine + \setnonasciicharscatcode\active + \latninechardefs + % + \else \ifx \declaredencoding \utfeight + \setnonasciicharscatcode\active + % since we already invoked \utfeightchardefs at the top level + % (below), do not re-invoke it, then our check for duplicated + % definitions triggers. Making non-ascii chars active is enough. + % + \else + \message{Ignoring unknown document encoding: #1.}% + % + \fi % utfeight + \fi % latnine + \fi % latone + \fi % lattwo + \fi % ascii +} + +% emacs-page +% A message to be logged when using a character that isn't available +% the default font encoding (OT1). +% +\def\missingcharmsg#1{\message{Character missing, sorry: #1.}} + +% Take account of \c (plain) vs. \, (Texinfo) difference. +\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi} + +% First, make active non-ASCII characters in order for them to be +% correctly categorized when TeX reads the replacement text of +% macros containing the character definitions. +\setnonasciicharscatcode\active +% +% Latin1 (ISO-8859-1) character definitions. +\def\latonechardefs{% + \gdef^^a0{\tie} + \gdef^^a1{\exclamdown} + \gdef^^a2{{\tcfont \char162}} % cent + \gdef^^a3{\pounds} + \gdef^^a4{{\tcfont \char164}} % currency + \gdef^^a5{{\tcfont \char165}} % yen + \gdef^^a6{{\tcfont \char166}} % broken bar + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\copyright} + \gdef^^aa{\ordf} + \gdef^^ab{\guillemetleft} + \gdef^^ac{\ensuremath\lnot} + \gdef^^ad{\-} + \gdef^^ae{\registeredsymbol} + \gdef^^af{\={}} + % + \gdef^^b0{\textdegree} + \gdef^^b1{$\pm$} + \gdef^^b2{$^2$} + \gdef^^b3{$^3$} + \gdef^^b4{\'{}} + \gdef^^b5{$\mu$} + \gdef^^b6{\P} + \gdef^^b7{\ensuremath\cdot} + \gdef^^b8{\cedilla\ } + \gdef^^b9{$^1$} + \gdef^^ba{\ordm} + \gdef^^bb{\guillemetright} + \gdef^^bc{$1\over4$} + \gdef^^bd{$1\over2$} + \gdef^^be{$3\over4$} + \gdef^^bf{\questiondown} + % + \gdef^^c0{\`A} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\~A} + \gdef^^c4{\"A} + \gdef^^c5{\ringaccent A} + \gdef^^c6{\AE} + \gdef^^c7{\cedilla C} + \gdef^^c8{\`E} + \gdef^^c9{\'E} + \gdef^^ca{\^E} + \gdef^^cb{\"E} + \gdef^^cc{\`I} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\"I} + % + \gdef^^d0{\DH} + \gdef^^d1{\~N} + \gdef^^d2{\`O} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\~O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\O} + \gdef^^d9{\`U} + \gdef^^da{\'U} + \gdef^^db{\^U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\TH} + \gdef^^df{\ss} + % + \gdef^^e0{\`a} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\~a} + \gdef^^e4{\"a} + \gdef^^e5{\ringaccent a} + \gdef^^e6{\ae} + \gdef^^e7{\cedilla c} + \gdef^^e8{\`e} + \gdef^^e9{\'e} + \gdef^^ea{\^e} + \gdef^^eb{\"e} + \gdef^^ec{\`{\dotless i}} + \gdef^^ed{\'{\dotless i}} + \gdef^^ee{\^{\dotless i}} + \gdef^^ef{\"{\dotless i}} + % + \gdef^^f0{\dh} + \gdef^^f1{\~n} + \gdef^^f2{\`o} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\~o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\o} + \gdef^^f9{\`u} + \gdef^^fa{\'u} + \gdef^^fb{\^u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\th} + \gdef^^ff{\"y} +} + +% Latin9 (ISO-8859-15) encoding character definitions. +\def\latninechardefs{% + % Encoding is almost identical to Latin1. + \latonechardefs + % + \gdef^^a4{\euro} + \gdef^^a6{\v S} + \gdef^^a8{\v s} + \gdef^^b4{\v Z} + \gdef^^b8{\v z} + \gdef^^bc{\OE} + \gdef^^bd{\oe} + \gdef^^be{\"Y} +} + +% Latin2 (ISO-8859-2) character definitions. +\def\lattwochardefs{% + \gdef^^a0{\tie} + \gdef^^a1{\ogonek{A}} + \gdef^^a2{\u{}} + \gdef^^a3{\L} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\v L} + \gdef^^a6{\'S} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\v S} + \gdef^^aa{\cedilla S} + \gdef^^ab{\v T} + \gdef^^ac{\'Z} + \gdef^^ad{\-} + \gdef^^ae{\v Z} + \gdef^^af{\dotaccent Z} + % + \gdef^^b0{\textdegree} + \gdef^^b1{\ogonek{a}} + \gdef^^b2{\ogonek{ }} + \gdef^^b3{\l} + \gdef^^b4{\'{}} + \gdef^^b5{\v l} + \gdef^^b6{\'s} + \gdef^^b7{\v{}} + \gdef^^b8{\cedilla\ } + \gdef^^b9{\v s} + \gdef^^ba{\cedilla s} + \gdef^^bb{\v t} + \gdef^^bc{\'z} + \gdef^^bd{\H{}} + \gdef^^be{\v z} + \gdef^^bf{\dotaccent z} + % + \gdef^^c0{\'R} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\u A} + \gdef^^c4{\"A} + \gdef^^c5{\'L} + \gdef^^c6{\'C} + \gdef^^c7{\cedilla C} + \gdef^^c8{\v C} + \gdef^^c9{\'E} + \gdef^^ca{\ogonek{E}} + \gdef^^cb{\"E} + \gdef^^cc{\v E} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\v D} + % + \gdef^^d0{\DH} + \gdef^^d1{\'N} + \gdef^^d2{\v N} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\H O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\v R} + \gdef^^d9{\ringaccent U} + \gdef^^da{\'U} + \gdef^^db{\H U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\cedilla T} + \gdef^^df{\ss} + % + \gdef^^e0{\'r} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\u a} + \gdef^^e4{\"a} + \gdef^^e5{\'l} + \gdef^^e6{\'c} + \gdef^^e7{\cedilla c} + \gdef^^e8{\v c} + \gdef^^e9{\'e} + \gdef^^ea{\ogonek{e}} + \gdef^^eb{\"e} + \gdef^^ec{\v e} + \gdef^^ed{\'{\dotless{i}}} + \gdef^^ee{\^{\dotless{i}}} + \gdef^^ef{\v d} + % + \gdef^^f0{\dh} + \gdef^^f1{\'n} + \gdef^^f2{\v n} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\H o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\v r} + \gdef^^f9{\ringaccent u} + \gdef^^fa{\'u} + \gdef^^fb{\H u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\cedilla t} + \gdef^^ff{\dotaccent{}} +} + +% UTF-8 character definitions. +% +% This code to support UTF-8 is based on LaTeX's utf8.def, with some +% changes for Texinfo conventions. It is included here under the GPL by +% permission from Frank Mittelbach and the LaTeX team. +% +\newcount\countUTFx +\newcount\countUTFy +\newcount\countUTFz + +\gdef\UTFviiiTwoOctets#1#2{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\endcsname} +% +\gdef\UTFviiiThreeOctets#1#2#3{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname} +% +\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname} + +\gdef\UTFviiiDefined#1{% + \ifx #1\relax + \message{\linenumber Unicode char \string #1 not defined for Texinfo}% + \else + \expandafter #1% + \fi +} + +\begingroup + \catcode`\~13 + \catcode`\"12 + + \def\UTFviiiLoop{% + \global\catcode\countUTFx\active + \uccode`\~\countUTFx + \uppercase\expandafter{\UTFviiiTmp}% + \advance\countUTFx by 1 + \ifnum\countUTFx < \countUTFy + \expandafter\UTFviiiLoop + \fi} + + \countUTFx = "C2 + \countUTFy = "E0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiTwoOctets\string~}} + \UTFviiiLoop + + \countUTFx = "E0 + \countUTFy = "F0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiThreeOctets\string~}} + \UTFviiiLoop + + \countUTFx = "F0 + \countUTFy = "F4 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiFourOctets\string~}} + \UTFviiiLoop +\endgroup + +\def\globallet{\global\let} % save some \expandafter's below + +% @U{xxxx} to produce U+xxxx, if we support it. +\def\U#1{% + \expandafter\ifx\csname uni:#1\endcsname \relax + \errhelp = \EMsimple + \errmessage{Unicode character U+#1 not supported, sorry}% + \else + \csname uni:#1\endcsname + \fi +} + +\begingroup + \catcode`\"=12 + \catcode`\<=12 + \catcode`\.=12 + \catcode`\,=12 + \catcode`\;=12 + \catcode`\!=12 + \catcode`\~=13 + \gdef\DeclareUnicodeCharacter#1#2{% + \countUTFz = "#1\relax + %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + \begingroup + \parseXMLCharref + \def\UTFviiiTwoOctets##1##2{% + \csname u8:##1\string ##2\endcsname}% + \def\UTFviiiThreeOctets##1##2##3{% + \csname u8:##1\string ##2\string ##3\endcsname}% + \def\UTFviiiFourOctets##1##2##3##4{% + \csname u8:##1\string ##2\string ##3\string ##4\endcsname}% + \expandafter\expandafter\expandafter\expandafter + \expandafter\expandafter\expandafter + \gdef\UTFviiiTmp{#2}% + % + \expandafter\ifx\csname uni:#1\endcsname \relax \else + \message{Internal error, already defined: #1}% + \fi + % + % define an additional control sequence for this code point. + \expandafter\globallet\csname uni:#1\endcsname \UTFviiiTmp + \endgroup} + + \gdef\parseXMLCharref{% + \ifnum\countUTFz < "A0\relax + \errhelp = \EMsimple + \errmessage{Cannot define Unicode char value < 00A0}% + \else\ifnum\countUTFz < "800\relax + \parseUTFviiiA,% + \parseUTFviiiB C\UTFviiiTwoOctets.,% + \else\ifnum\countUTFz < "10000\relax + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiB E\UTFviiiThreeOctets.{,;}% + \else + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiA!% + \parseUTFviiiB F\UTFviiiFourOctets.{!,;}% + \fi\fi\fi + } + + \gdef\parseUTFviiiA#1{% + \countUTFx = \countUTFz + \divide\countUTFz by 64 + \countUTFy = \countUTFz + \multiply\countUTFz by 64 + \advance\countUTFx by -\countUTFz + \advance\countUTFx by 128 + \uccode `#1\countUTFx + \countUTFz = \countUTFy} + + \gdef\parseUTFviiiB#1#2#3#4{% + \advance\countUTFz by "#10\relax + \uccode `#3\countUTFz + \uppercase{\gdef\UTFviiiTmp{#2#3#4}}} +\endgroup + +% https://en.wikipedia.org/wiki/Plane_(Unicode)#Basic_M +% U+0000..U+007F = https://en.wikipedia.org/wiki/Basic_Latin_(Unicode_block) +% U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block) +% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A +% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B +% +% Many of our renditions are less than wonderful, and all the missing +% characters are available somewhere. Loading the necessary fonts +% awaits user request. We can't truly support Unicode without +% reimplementing everything that's been done in LaTeX for many years, +% plus probably using luatex or xetex, and who knows what else. +% We won't be doing that here in this simple file. But we can try to at +% least make most of the characters not bomb out. +% +\def\utfeightchardefs{% + \DeclareUnicodeCharacter{00A0}{\tie} + \DeclareUnicodeCharacter{00A1}{\exclamdown} + \DeclareUnicodeCharacter{00A2}{{\tcfont \char162}}% 0242=cent + \DeclareUnicodeCharacter{00A3}{\pounds} + \DeclareUnicodeCharacter{00A4}{{\tcfont \char164}}% 0244=currency + \DeclareUnicodeCharacter{00A5}{{\tcfont \char165}}% 0245=yen + \DeclareUnicodeCharacter{00A6}{{\tcfont \char166}}% 0246=brokenbar + \DeclareUnicodeCharacter{00A7}{\S} + \DeclareUnicodeCharacter{00A8}{\"{ }} + \DeclareUnicodeCharacter{00A9}{\copyright} + \DeclareUnicodeCharacter{00AA}{\ordf} + \DeclareUnicodeCharacter{00AB}{\guillemetleft} + \DeclareUnicodeCharacter{00AC}{\ensuremath\lnot} + \DeclareUnicodeCharacter{00AD}{\-} + \DeclareUnicodeCharacter{00AE}{\registeredsymbol} + \DeclareUnicodeCharacter{00AF}{\={ }} + + \DeclareUnicodeCharacter{00B0}{\ringaccent{ }} + \DeclareUnicodeCharacter{00B1}{\ensuremath\pm} + \DeclareUnicodeCharacter{00B2}{$^2$} + \DeclareUnicodeCharacter{00B3}{$^3$} + \DeclareUnicodeCharacter{00B4}{\'{ }} + \DeclareUnicodeCharacter{00B5}{$\mu$} + \DeclareUnicodeCharacter{00B6}{\P} + \DeclareUnicodeCharacter{00B7}{\ensuremath\cdot} + \DeclareUnicodeCharacter{00B8}{\cedilla{ }} + \DeclareUnicodeCharacter{00B9}{$^1$} + \DeclareUnicodeCharacter{00BA}{\ordm} + \DeclareUnicodeCharacter{00BB}{\guillemetright} + \DeclareUnicodeCharacter{00BC}{$1\over4$} + \DeclareUnicodeCharacter{00BD}{$1\over2$} + \DeclareUnicodeCharacter{00BE}{$3\over4$} + \DeclareUnicodeCharacter{00BF}{\questiondown} + + \DeclareUnicodeCharacter{00C0}{\`A} + \DeclareUnicodeCharacter{00C1}{\'A} + \DeclareUnicodeCharacter{00C2}{\^A} + \DeclareUnicodeCharacter{00C3}{\~A} + \DeclareUnicodeCharacter{00C4}{\"A} + \DeclareUnicodeCharacter{00C5}{\AA} + \DeclareUnicodeCharacter{00C6}{\AE} + \DeclareUnicodeCharacter{00C7}{\cedilla{C}} + \DeclareUnicodeCharacter{00C8}{\`E} + \DeclareUnicodeCharacter{00C9}{\'E} + \DeclareUnicodeCharacter{00CA}{\^E} + \DeclareUnicodeCharacter{00CB}{\"E} + \DeclareUnicodeCharacter{00CC}{\`I} + \DeclareUnicodeCharacter{00CD}{\'I} + \DeclareUnicodeCharacter{00CE}{\^I} + \DeclareUnicodeCharacter{00CF}{\"I} + + \DeclareUnicodeCharacter{00D0}{\DH} + \DeclareUnicodeCharacter{00D1}{\~N} + \DeclareUnicodeCharacter{00D2}{\`O} + \DeclareUnicodeCharacter{00D3}{\'O} + \DeclareUnicodeCharacter{00D4}{\^O} + \DeclareUnicodeCharacter{00D5}{\~O} + \DeclareUnicodeCharacter{00D6}{\"O} + \DeclareUnicodeCharacter{00D7}{\ensuremath\times} + \DeclareUnicodeCharacter{00D8}{\O} + \DeclareUnicodeCharacter{00D9}{\`U} + \DeclareUnicodeCharacter{00DA}{\'U} + \DeclareUnicodeCharacter{00DB}{\^U} + \DeclareUnicodeCharacter{00DC}{\"U} + \DeclareUnicodeCharacter{00DD}{\'Y} + \DeclareUnicodeCharacter{00DE}{\TH} + \DeclareUnicodeCharacter{00DF}{\ss} + + \DeclareUnicodeCharacter{00E0}{\`a} + \DeclareUnicodeCharacter{00E1}{\'a} + \DeclareUnicodeCharacter{00E2}{\^a} + \DeclareUnicodeCharacter{00E3}{\~a} + \DeclareUnicodeCharacter{00E4}{\"a} + \DeclareUnicodeCharacter{00E5}{\aa} + \DeclareUnicodeCharacter{00E6}{\ae} + \DeclareUnicodeCharacter{00E7}{\cedilla{c}} + \DeclareUnicodeCharacter{00E8}{\`e} + \DeclareUnicodeCharacter{00E9}{\'e} + \DeclareUnicodeCharacter{00EA}{\^e} + \DeclareUnicodeCharacter{00EB}{\"e} + \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}} + \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}} + \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}} + \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}} + + \DeclareUnicodeCharacter{00F0}{\dh} + \DeclareUnicodeCharacter{00F1}{\~n} + \DeclareUnicodeCharacter{00F2}{\`o} + \DeclareUnicodeCharacter{00F3}{\'o} + \DeclareUnicodeCharacter{00F4}{\^o} + \DeclareUnicodeCharacter{00F5}{\~o} + \DeclareUnicodeCharacter{00F6}{\"o} + \DeclareUnicodeCharacter{00F7}{\ensuremath\div} + \DeclareUnicodeCharacter{00F8}{\o} + \DeclareUnicodeCharacter{00F9}{\`u} + \DeclareUnicodeCharacter{00FA}{\'u} + \DeclareUnicodeCharacter{00FB}{\^u} + \DeclareUnicodeCharacter{00FC}{\"u} + \DeclareUnicodeCharacter{00FD}{\'y} + \DeclareUnicodeCharacter{00FE}{\th} + \DeclareUnicodeCharacter{00FF}{\"y} + + \DeclareUnicodeCharacter{0100}{\=A} + \DeclareUnicodeCharacter{0101}{\=a} + \DeclareUnicodeCharacter{0102}{\u{A}} + \DeclareUnicodeCharacter{0103}{\u{a}} + \DeclareUnicodeCharacter{0104}{\ogonek{A}} + \DeclareUnicodeCharacter{0105}{\ogonek{a}} + \DeclareUnicodeCharacter{0106}{\'C} + \DeclareUnicodeCharacter{0107}{\'c} + \DeclareUnicodeCharacter{0108}{\^C} + \DeclareUnicodeCharacter{0109}{\^c} + \DeclareUnicodeCharacter{010A}{\dotaccent{C}} + \DeclareUnicodeCharacter{010B}{\dotaccent{c}} + \DeclareUnicodeCharacter{010C}{\v{C}} + \DeclareUnicodeCharacter{010D}{\v{c}} + \DeclareUnicodeCharacter{010E}{\v{D}} + \DeclareUnicodeCharacter{010F}{d'} + + \DeclareUnicodeCharacter{0110}{\DH} + \DeclareUnicodeCharacter{0111}{\dh} + \DeclareUnicodeCharacter{0112}{\=E} + \DeclareUnicodeCharacter{0113}{\=e} + \DeclareUnicodeCharacter{0114}{\u{E}} + \DeclareUnicodeCharacter{0115}{\u{e}} + \DeclareUnicodeCharacter{0116}{\dotaccent{E}} + \DeclareUnicodeCharacter{0117}{\dotaccent{e}} + \DeclareUnicodeCharacter{0118}{\ogonek{E}} + \DeclareUnicodeCharacter{0119}{\ogonek{e}} + \DeclareUnicodeCharacter{011A}{\v{E}} + \DeclareUnicodeCharacter{011B}{\v{e}} + \DeclareUnicodeCharacter{011C}{\^G} + \DeclareUnicodeCharacter{011D}{\^g} + \DeclareUnicodeCharacter{011E}{\u{G}} + \DeclareUnicodeCharacter{011F}{\u{g}} + + \DeclareUnicodeCharacter{0120}{\dotaccent{G}} + \DeclareUnicodeCharacter{0121}{\dotaccent{g}} + \DeclareUnicodeCharacter{0122}{\cedilla{G}} + \DeclareUnicodeCharacter{0123}{\cedilla{g}} + \DeclareUnicodeCharacter{0124}{\^H} + \DeclareUnicodeCharacter{0125}{\^h} + \DeclareUnicodeCharacter{0126}{\missingcharmsg{H WITH STROKE}} + \DeclareUnicodeCharacter{0127}{\missingcharmsg{h WITH STROKE}} + \DeclareUnicodeCharacter{0128}{\~I} + \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}} + \DeclareUnicodeCharacter{012A}{\=I} + \DeclareUnicodeCharacter{012B}{\={\dotless{i}}} + \DeclareUnicodeCharacter{012C}{\u{I}} + \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}} + \DeclareUnicodeCharacter{012E}{\ogonek{I}} + \DeclareUnicodeCharacter{012F}{\ogonek{i}} + + \DeclareUnicodeCharacter{0130}{\dotaccent{I}} + \DeclareUnicodeCharacter{0131}{\dotless{i}} + \DeclareUnicodeCharacter{0132}{IJ} + \DeclareUnicodeCharacter{0133}{ij} + \DeclareUnicodeCharacter{0134}{\^J} + \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}} + \DeclareUnicodeCharacter{0136}{\cedilla{K}} + \DeclareUnicodeCharacter{0137}{\cedilla{k}} + \DeclareUnicodeCharacter{0138}{\ensuremath\kappa} + \DeclareUnicodeCharacter{0139}{\'L} + \DeclareUnicodeCharacter{013A}{\'l} + \DeclareUnicodeCharacter{013B}{\cedilla{L}} + \DeclareUnicodeCharacter{013C}{\cedilla{l}} + \DeclareUnicodeCharacter{013D}{L'}% should kern + \DeclareUnicodeCharacter{013E}{l'}% should kern + \DeclareUnicodeCharacter{013F}{L\U{00B7}} + + \DeclareUnicodeCharacter{0140}{l\U{00B7}} + \DeclareUnicodeCharacter{0141}{\L} + \DeclareUnicodeCharacter{0142}{\l} + \DeclareUnicodeCharacter{0143}{\'N} + \DeclareUnicodeCharacter{0144}{\'n} + \DeclareUnicodeCharacter{0145}{\cedilla{N}} + \DeclareUnicodeCharacter{0146}{\cedilla{n}} + \DeclareUnicodeCharacter{0147}{\v{N}} + \DeclareUnicodeCharacter{0148}{\v{n}} + \DeclareUnicodeCharacter{0149}{'n} + \DeclareUnicodeCharacter{014A}{\missingcharmsg{ENG}} + \DeclareUnicodeCharacter{014B}{\missingcharmsg{eng}} + \DeclareUnicodeCharacter{014C}{\=O} + \DeclareUnicodeCharacter{014D}{\=o} + \DeclareUnicodeCharacter{014E}{\u{O}} + \DeclareUnicodeCharacter{014F}{\u{o}} + + \DeclareUnicodeCharacter{0150}{\H{O}} + \DeclareUnicodeCharacter{0151}{\H{o}} + \DeclareUnicodeCharacter{0152}{\OE} + \DeclareUnicodeCharacter{0153}{\oe} + \DeclareUnicodeCharacter{0154}{\'R} + \DeclareUnicodeCharacter{0155}{\'r} + \DeclareUnicodeCharacter{0156}{\cedilla{R}} + \DeclareUnicodeCharacter{0157}{\cedilla{r}} + \DeclareUnicodeCharacter{0158}{\v{R}} + \DeclareUnicodeCharacter{0159}{\v{r}} + \DeclareUnicodeCharacter{015A}{\'S} + \DeclareUnicodeCharacter{015B}{\'s} + \DeclareUnicodeCharacter{015C}{\^S} + \DeclareUnicodeCharacter{015D}{\^s} + \DeclareUnicodeCharacter{015E}{\cedilla{S}} + \DeclareUnicodeCharacter{015F}{\cedilla{s}} + + \DeclareUnicodeCharacter{0160}{\v{S}} + \DeclareUnicodeCharacter{0161}{\v{s}} + \DeclareUnicodeCharacter{0162}{\cedilla{T}} + \DeclareUnicodeCharacter{0163}{\cedilla{t}} + \DeclareUnicodeCharacter{0164}{\v{T}} + \DeclareUnicodeCharacter{0165}{\v{t}} + \DeclareUnicodeCharacter{0166}{\missingcharmsg{H WITH STROKE}} + \DeclareUnicodeCharacter{0167}{\missingcharmsg{h WITH STROKE}} + \DeclareUnicodeCharacter{0168}{\~U} + \DeclareUnicodeCharacter{0169}{\~u} + \DeclareUnicodeCharacter{016A}{\=U} + \DeclareUnicodeCharacter{016B}{\=u} + \DeclareUnicodeCharacter{016C}{\u{U}} + \DeclareUnicodeCharacter{016D}{\u{u}} + \DeclareUnicodeCharacter{016E}{\ringaccent{U}} + \DeclareUnicodeCharacter{016F}{\ringaccent{u}} + + \DeclareUnicodeCharacter{0170}{\H{U}} + \DeclareUnicodeCharacter{0171}{\H{u}} + \DeclareUnicodeCharacter{0172}{\ogonek{U}} + \DeclareUnicodeCharacter{0173}{\ogonek{u}} + \DeclareUnicodeCharacter{0174}{\^W} + \DeclareUnicodeCharacter{0175}{\^w} + \DeclareUnicodeCharacter{0176}{\^Y} + \DeclareUnicodeCharacter{0177}{\^y} + \DeclareUnicodeCharacter{0178}{\"Y} + \DeclareUnicodeCharacter{0179}{\'Z} + \DeclareUnicodeCharacter{017A}{\'z} + \DeclareUnicodeCharacter{017B}{\dotaccent{Z}} + \DeclareUnicodeCharacter{017C}{\dotaccent{z}} + \DeclareUnicodeCharacter{017D}{\v{Z}} + \DeclareUnicodeCharacter{017E}{\v{z}} + \DeclareUnicodeCharacter{017F}{\missingcharmsg{LONG S}} + + \DeclareUnicodeCharacter{01C4}{D\v{Z}} + \DeclareUnicodeCharacter{01C5}{D\v{z}} + \DeclareUnicodeCharacter{01C6}{d\v{z}} + \DeclareUnicodeCharacter{01C7}{LJ} + \DeclareUnicodeCharacter{01C8}{Lj} + \DeclareUnicodeCharacter{01C9}{lj} + \DeclareUnicodeCharacter{01CA}{NJ} + \DeclareUnicodeCharacter{01CB}{Nj} + \DeclareUnicodeCharacter{01CC}{nj} + \DeclareUnicodeCharacter{01CD}{\v{A}} + \DeclareUnicodeCharacter{01CE}{\v{a}} + \DeclareUnicodeCharacter{01CF}{\v{I}} + + \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}} + \DeclareUnicodeCharacter{01D1}{\v{O}} + \DeclareUnicodeCharacter{01D2}{\v{o}} + \DeclareUnicodeCharacter{01D3}{\v{U}} + \DeclareUnicodeCharacter{01D4}{\v{u}} + + \DeclareUnicodeCharacter{01E2}{\={\AE}} + \DeclareUnicodeCharacter{01E3}{\={\ae}} + \DeclareUnicodeCharacter{01E6}{\v{G}} + \DeclareUnicodeCharacter{01E7}{\v{g}} + \DeclareUnicodeCharacter{01E8}{\v{K}} + \DeclareUnicodeCharacter{01E9}{\v{k}} + + \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}} + \DeclareUnicodeCharacter{01F1}{DZ} + \DeclareUnicodeCharacter{01F2}{Dz} + \DeclareUnicodeCharacter{01F3}{dz} + \DeclareUnicodeCharacter{01F4}{\'G} + \DeclareUnicodeCharacter{01F5}{\'g} + \DeclareUnicodeCharacter{01F8}{\`N} + \DeclareUnicodeCharacter{01F9}{\`n} + \DeclareUnicodeCharacter{01FC}{\'{\AE}} + \DeclareUnicodeCharacter{01FD}{\'{\ae}} + \DeclareUnicodeCharacter{01FE}{\'{\O}} + \DeclareUnicodeCharacter{01FF}{\'{\o}} + + \DeclareUnicodeCharacter{021E}{\v{H}} + \DeclareUnicodeCharacter{021F}{\v{h}} + + \DeclareUnicodeCharacter{0226}{\dotaccent{A}} + \DeclareUnicodeCharacter{0227}{\dotaccent{a}} + \DeclareUnicodeCharacter{0228}{\cedilla{E}} + \DeclareUnicodeCharacter{0229}{\cedilla{e}} + \DeclareUnicodeCharacter{022E}{\dotaccent{O}} + \DeclareUnicodeCharacter{022F}{\dotaccent{o}} + + \DeclareUnicodeCharacter{0232}{\=Y} + \DeclareUnicodeCharacter{0233}{\=y} + \DeclareUnicodeCharacter{0237}{\dotless{j}} + + \DeclareUnicodeCharacter{02DB}{\ogonek{ }} + + % Greek letters upper case + \DeclareUnicodeCharacter{0391}{{\it A}} + \DeclareUnicodeCharacter{0392}{{\it B}} + \DeclareUnicodeCharacter{0393}{\ensuremath{\mit\Gamma}} + \DeclareUnicodeCharacter{0394}{\ensuremath{\mit\Delta}} + \DeclareUnicodeCharacter{0395}{{\it E}} + \DeclareUnicodeCharacter{0396}{{\it Z}} + \DeclareUnicodeCharacter{0397}{{\it H}} + \DeclareUnicodeCharacter{0398}{\ensuremath{\mit\Theta}} + \DeclareUnicodeCharacter{0399}{{\it I}} + \DeclareUnicodeCharacter{039A}{{\it K}} + \DeclareUnicodeCharacter{039B}{\ensuremath{\mit\Lambda}} + \DeclareUnicodeCharacter{039C}{{\it M}} + \DeclareUnicodeCharacter{039D}{{\it N}} + \DeclareUnicodeCharacter{039E}{\ensuremath{\mit\Xi}} + \DeclareUnicodeCharacter{039F}{{\it O}} + \DeclareUnicodeCharacter{03A0}{\ensuremath{\mit\Pi}} + \DeclareUnicodeCharacter{03A1}{{\it P}} + %\DeclareUnicodeCharacter{03A2}{} % none - corresponds to final sigma + \DeclareUnicodeCharacter{03A3}{\ensuremath{\mit\Sigma}} + \DeclareUnicodeCharacter{03A4}{{\it T}} + \DeclareUnicodeCharacter{03A5}{\ensuremath{\mit\Upsilon}} + \DeclareUnicodeCharacter{03A6}{\ensuremath{\mit\Phi}} + \DeclareUnicodeCharacter{03A7}{{\it X}} + \DeclareUnicodeCharacter{03A8}{\ensuremath{\mit\Psi}} + \DeclareUnicodeCharacter{03A9}{\ensuremath{\mit\Omega}} + + % Vowels with accents + \DeclareUnicodeCharacter{0390}{\ensuremath{\ddot{\acute\iota}}} + \DeclareUnicodeCharacter{03AC}{\ensuremath{\acute\alpha}} + \DeclareUnicodeCharacter{03AD}{\ensuremath{\acute\epsilon}} + \DeclareUnicodeCharacter{03AE}{\ensuremath{\acute\eta}} + \DeclareUnicodeCharacter{03AF}{\ensuremath{\acute\iota}} + \DeclareUnicodeCharacter{03B0}{\ensuremath{\acute{\ddot\upsilon}}} + + % Standalone accent + \DeclareUnicodeCharacter{0384}{\ensuremath{\acute{\ }}} + + % Greek letters lower case + \DeclareUnicodeCharacter{03B1}{\ensuremath\alpha} + \DeclareUnicodeCharacter{03B2}{\ensuremath\beta} + \DeclareUnicodeCharacter{03B3}{\ensuremath\gamma} + \DeclareUnicodeCharacter{03B4}{\ensuremath\delta} + \DeclareUnicodeCharacter{03B5}{\ensuremath\epsilon} + \DeclareUnicodeCharacter{03B6}{\ensuremath\zeta} + \DeclareUnicodeCharacter{03B7}{\ensuremath\eta} + \DeclareUnicodeCharacter{03B8}{\ensuremath\theta} + \DeclareUnicodeCharacter{03B9}{\ensuremath\iota} + \DeclareUnicodeCharacter{03BA}{\ensuremath\kappa} + \DeclareUnicodeCharacter{03BB}{\ensuremath\lambda} + \DeclareUnicodeCharacter{03BC}{\ensuremath\mu} + \DeclareUnicodeCharacter{03BD}{\ensuremath\nu} + \DeclareUnicodeCharacter{03BE}{\ensuremath\xi} + \DeclareUnicodeCharacter{03BF}{{\it o}} % omicron + \DeclareUnicodeCharacter{03C0}{\ensuremath\pi} + \DeclareUnicodeCharacter{03C1}{\ensuremath\rho} + \DeclareUnicodeCharacter{03C2}{\ensuremath\varsigma} + \DeclareUnicodeCharacter{03C3}{\ensuremath\sigma} + \DeclareUnicodeCharacter{03C4}{\ensuremath\tau} + \DeclareUnicodeCharacter{03C5}{\ensuremath\upsilon} + \DeclareUnicodeCharacter{03C6}{\ensuremath\phi} + \DeclareUnicodeCharacter{03C7}{\ensuremath\chi} + \DeclareUnicodeCharacter{03C8}{\ensuremath\psi} + \DeclareUnicodeCharacter{03C9}{\ensuremath\omega} + + % More Greek vowels with accents + \DeclareUnicodeCharacter{03CA}{\ensuremath{\ddot\iota}} + \DeclareUnicodeCharacter{03CB}{\ensuremath{\ddot\upsilon}} + \DeclareUnicodeCharacter{03CC}{\ensuremath{\acute o}} + \DeclareUnicodeCharacter{03CD}{\ensuremath{\acute\upsilon}} + \DeclareUnicodeCharacter{03CE}{\ensuremath{\acute\omega}} + + % Variant Greek letters + \DeclareUnicodeCharacter{03D1}{\ensuremath\vartheta} + \DeclareUnicodeCharacter{03D6}{\ensuremath\varpi} + \DeclareUnicodeCharacter{03F1}{\ensuremath\varrho} + + \DeclareUnicodeCharacter{1E02}{\dotaccent{B}} + \DeclareUnicodeCharacter{1E03}{\dotaccent{b}} + \DeclareUnicodeCharacter{1E04}{\udotaccent{B}} + \DeclareUnicodeCharacter{1E05}{\udotaccent{b}} + \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}} + \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}} + \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}} + \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}} + \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}} + \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}} + \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}} + \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}} + + \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}} + \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}} + + \DeclareUnicodeCharacter{1E20}{\=G} + \DeclareUnicodeCharacter{1E21}{\=g} + \DeclareUnicodeCharacter{1E22}{\dotaccent{H}} + \DeclareUnicodeCharacter{1E23}{\dotaccent{h}} + \DeclareUnicodeCharacter{1E24}{\udotaccent{H}} + \DeclareUnicodeCharacter{1E25}{\udotaccent{h}} + \DeclareUnicodeCharacter{1E26}{\"H} + \DeclareUnicodeCharacter{1E27}{\"h} + + \DeclareUnicodeCharacter{1E30}{\'K} + \DeclareUnicodeCharacter{1E31}{\'k} + \DeclareUnicodeCharacter{1E32}{\udotaccent{K}} + \DeclareUnicodeCharacter{1E33}{\udotaccent{k}} + \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}} + \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}} + \DeclareUnicodeCharacter{1E36}{\udotaccent{L}} + \DeclareUnicodeCharacter{1E37}{\udotaccent{l}} + \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}} + \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}} + \DeclareUnicodeCharacter{1E3E}{\'M} + \DeclareUnicodeCharacter{1E3F}{\'m} + + \DeclareUnicodeCharacter{1E40}{\dotaccent{M}} + \DeclareUnicodeCharacter{1E41}{\dotaccent{m}} + \DeclareUnicodeCharacter{1E42}{\udotaccent{M}} + \DeclareUnicodeCharacter{1E43}{\udotaccent{m}} + \DeclareUnicodeCharacter{1E44}{\dotaccent{N}} + \DeclareUnicodeCharacter{1E45}{\dotaccent{n}} + \DeclareUnicodeCharacter{1E46}{\udotaccent{N}} + \DeclareUnicodeCharacter{1E47}{\udotaccent{n}} + \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}} + \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}} + + \DeclareUnicodeCharacter{1E54}{\'P} + \DeclareUnicodeCharacter{1E55}{\'p} + \DeclareUnicodeCharacter{1E56}{\dotaccent{P}} + \DeclareUnicodeCharacter{1E57}{\dotaccent{p}} + \DeclareUnicodeCharacter{1E58}{\dotaccent{R}} + \DeclareUnicodeCharacter{1E59}{\dotaccent{r}} + \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}} + \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}} + \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}} + \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}} + + \DeclareUnicodeCharacter{1E60}{\dotaccent{S}} + \DeclareUnicodeCharacter{1E61}{\dotaccent{s}} + \DeclareUnicodeCharacter{1E62}{\udotaccent{S}} + \DeclareUnicodeCharacter{1E63}{\udotaccent{s}} + \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}} + \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}} + \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}} + \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}} + \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}} + \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}} + + \DeclareUnicodeCharacter{1E7C}{\~V} + \DeclareUnicodeCharacter{1E7D}{\~v} + \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}} + \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}} + + \DeclareUnicodeCharacter{1E80}{\`W} + \DeclareUnicodeCharacter{1E81}{\`w} + \DeclareUnicodeCharacter{1E82}{\'W} + \DeclareUnicodeCharacter{1E83}{\'w} + \DeclareUnicodeCharacter{1E84}{\"W} + \DeclareUnicodeCharacter{1E85}{\"w} + \DeclareUnicodeCharacter{1E86}{\dotaccent{W}} + \DeclareUnicodeCharacter{1E87}{\dotaccent{w}} + \DeclareUnicodeCharacter{1E88}{\udotaccent{W}} + \DeclareUnicodeCharacter{1E89}{\udotaccent{w}} + \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}} + \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}} + \DeclareUnicodeCharacter{1E8C}{\"X} + \DeclareUnicodeCharacter{1E8D}{\"x} + \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}} + \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}} + + \DeclareUnicodeCharacter{1E90}{\^Z} + \DeclareUnicodeCharacter{1E91}{\^z} + \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}} + \DeclareUnicodeCharacter{1E93}{\udotaccent{z}} + \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}} + \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}} + \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}} + \DeclareUnicodeCharacter{1E97}{\"t} + \DeclareUnicodeCharacter{1E98}{\ringaccent{w}} + \DeclareUnicodeCharacter{1E99}{\ringaccent{y}} + + \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}} + \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}} + + \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}} + \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}} + \DeclareUnicodeCharacter{1EBC}{\~E} + \DeclareUnicodeCharacter{1EBD}{\~e} + + \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}} + \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}} + \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}} + \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}} + + \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}} + \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}} + + \DeclareUnicodeCharacter{1EF2}{\`Y} + \DeclareUnicodeCharacter{1EF3}{\`y} + \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}} + + \DeclareUnicodeCharacter{1EF8}{\~Y} + \DeclareUnicodeCharacter{1EF9}{\~y} + + % Punctuation + \DeclareUnicodeCharacter{2013}{--} + \DeclareUnicodeCharacter{2014}{---} + \DeclareUnicodeCharacter{2018}{\quoteleft} + \DeclareUnicodeCharacter{2019}{\quoteright} + \DeclareUnicodeCharacter{201A}{\quotesinglbase} + \DeclareUnicodeCharacter{201C}{\quotedblleft} + \DeclareUnicodeCharacter{201D}{\quotedblright} + \DeclareUnicodeCharacter{201E}{\quotedblbase} + \DeclareUnicodeCharacter{2020}{\ensuremath\dagger} + \DeclareUnicodeCharacter{2021}{\ensuremath\ddagger} + \DeclareUnicodeCharacter{2022}{\bullet} + \DeclareUnicodeCharacter{202F}{\thinspace} + \DeclareUnicodeCharacter{2026}{\dots} + \DeclareUnicodeCharacter{2039}{\guilsinglleft} + \DeclareUnicodeCharacter{203A}{\guilsinglright} + + \DeclareUnicodeCharacter{20AC}{\euro} + + \DeclareUnicodeCharacter{2192}{\expansion} + \DeclareUnicodeCharacter{21D2}{\result} + + % Mathematical symbols + \DeclareUnicodeCharacter{2200}{\ensuremath\forall} + \DeclareUnicodeCharacter{2203}{\ensuremath\exists} + \DeclareUnicodeCharacter{2208}{\ensuremath\in} + \DeclareUnicodeCharacter{2212}{\minus} + \DeclareUnicodeCharacter{2217}{\ast} + \DeclareUnicodeCharacter{221E}{\ensuremath\infty} + \DeclareUnicodeCharacter{2225}{\ensuremath\parallel} + \DeclareUnicodeCharacter{2227}{\ensuremath\wedge} + \DeclareUnicodeCharacter{2229}{\ensuremath\cap} + \DeclareUnicodeCharacter{2261}{\equiv} + \DeclareUnicodeCharacter{2264}{\ensuremath\leq} + \DeclareUnicodeCharacter{2265}{\ensuremath\geq} + \DeclareUnicodeCharacter{2282}{\ensuremath\subset} + \DeclareUnicodeCharacter{2287}{\ensuremath\supseteq} + + \DeclareUnicodeCharacter{2016}{\ensuremath\Vert} + \DeclareUnicodeCharacter{2032}{\ensuremath\prime} + \DeclareUnicodeCharacter{210F}{\ensuremath\hbar} + \DeclareUnicodeCharacter{2111}{\ensuremath\Im} + \DeclareUnicodeCharacter{2113}{\ensuremath\ell} + \DeclareUnicodeCharacter{2118}{\ensuremath\wp} + \DeclareUnicodeCharacter{211C}{\ensuremath\Re} + \DeclareUnicodeCharacter{2127}{\ensuremath\mho} + \DeclareUnicodeCharacter{2135}{\ensuremath\aleph} + \DeclareUnicodeCharacter{2190}{\ensuremath\leftarrow} + \DeclareUnicodeCharacter{2191}{\ensuremath\uparrow} + \DeclareUnicodeCharacter{2193}{\ensuremath\downarrow} + \DeclareUnicodeCharacter{2194}{\ensuremath\leftrightarrow} + \DeclareUnicodeCharacter{2195}{\ensuremath\updownarrow} + \DeclareUnicodeCharacter{2196}{\ensuremath\nwarrow} + \DeclareUnicodeCharacter{2197}{\ensuremath\nearrow} + \DeclareUnicodeCharacter{2198}{\ensuremath\searrow} + \DeclareUnicodeCharacter{2199}{\ensuremath\swarrow} + \DeclareUnicodeCharacter{21A6}{\ensuremath\mapsto} + \DeclareUnicodeCharacter{21A9}{\ensuremath\hookleftarrow} + \DeclareUnicodeCharacter{21AA}{\ensuremath\hookrightarrow} + \DeclareUnicodeCharacter{21BC}{\ensuremath\leftharpoonup} + \DeclareUnicodeCharacter{21BD}{\ensuremath\leftharpoondown} + \DeclareUnicodeCharacter{21BE}{\ensuremath\upharpoonright} + \DeclareUnicodeCharacter{21C0}{\ensuremath\rightharpoonup} + \DeclareUnicodeCharacter{21C1}{\ensuremath\rightharpoondown} + \DeclareUnicodeCharacter{21CC}{\ensuremath\rightleftharpoons} + \DeclareUnicodeCharacter{21D0}{\ensuremath\Leftarrow} + \DeclareUnicodeCharacter{21D1}{\ensuremath\Uparrow} + \DeclareUnicodeCharacter{21D3}{\ensuremath\Downarrow} + \DeclareUnicodeCharacter{21D4}{\ensuremath\Leftrightarrow} + \DeclareUnicodeCharacter{21D5}{\ensuremath\Updownarrow} + \DeclareUnicodeCharacter{21DD}{\ensuremath\leadsto} + \DeclareUnicodeCharacter{2201}{\ensuremath\complement} + \DeclareUnicodeCharacter{2202}{\ensuremath\partial} + \DeclareUnicodeCharacter{2205}{\ensuremath\emptyset} + \DeclareUnicodeCharacter{2207}{\ensuremath\nabla} + \DeclareUnicodeCharacter{2209}{\ensuremath\notin} + \DeclareUnicodeCharacter{220B}{\ensuremath\owns} + \DeclareUnicodeCharacter{220F}{\ensuremath\prod} + \DeclareUnicodeCharacter{2210}{\ensuremath\coprod} + \DeclareUnicodeCharacter{2211}{\ensuremath\sum} + \DeclareUnicodeCharacter{2213}{\ensuremath\mp} + \DeclareUnicodeCharacter{2218}{\ensuremath\circ} + \DeclareUnicodeCharacter{221A}{\ensuremath\surd} + \DeclareUnicodeCharacter{221D}{\ensuremath\propto} + \DeclareUnicodeCharacter{2220}{\ensuremath\angle} + \DeclareUnicodeCharacter{2223}{\ensuremath\mid} + \DeclareUnicodeCharacter{2228}{\ensuremath\vee} + \DeclareUnicodeCharacter{222A}{\ensuremath\cup} + \DeclareUnicodeCharacter{222B}{\ensuremath\smallint} + \DeclareUnicodeCharacter{222E}{\ensuremath\oint} + \DeclareUnicodeCharacter{223C}{\ensuremath\sim} + \DeclareUnicodeCharacter{2240}{\ensuremath\wr} + \DeclareUnicodeCharacter{2243}{\ensuremath\simeq} + \DeclareUnicodeCharacter{2245}{\ensuremath\cong} + \DeclareUnicodeCharacter{2248}{\ensuremath\approx} + \DeclareUnicodeCharacter{224D}{\ensuremath\asymp} + \DeclareUnicodeCharacter{2250}{\ensuremath\doteq} + \DeclareUnicodeCharacter{2260}{\ensuremath\neq} + \DeclareUnicodeCharacter{226A}{\ensuremath\ll} + \DeclareUnicodeCharacter{226B}{\ensuremath\gg} + \DeclareUnicodeCharacter{227A}{\ensuremath\prec} + \DeclareUnicodeCharacter{227B}{\ensuremath\succ} + \DeclareUnicodeCharacter{2283}{\ensuremath\supset} + \DeclareUnicodeCharacter{2286}{\ensuremath\subseteq} + \DeclareUnicodeCharacter{228E}{\ensuremath\uplus} + \DeclareUnicodeCharacter{228F}{\ensuremath\sqsubset} + \DeclareUnicodeCharacter{2290}{\ensuremath\sqsupset} + \DeclareUnicodeCharacter{2291}{\ensuremath\sqsubseteq} + \DeclareUnicodeCharacter{2292}{\ensuremath\sqsupseteq} + \DeclareUnicodeCharacter{2293}{\ensuremath\sqcap} + \DeclareUnicodeCharacter{2294}{\ensuremath\sqcup} + \DeclareUnicodeCharacter{2295}{\ensuremath\oplus} + \DeclareUnicodeCharacter{2296}{\ensuremath\ominus} + \DeclareUnicodeCharacter{2297}{\ensuremath\otimes} + \DeclareUnicodeCharacter{2298}{\ensuremath\oslash} + \DeclareUnicodeCharacter{2299}{\ensuremath\odot} + \DeclareUnicodeCharacter{22A2}{\ensuremath\vdash} + \DeclareUnicodeCharacter{22A3}{\ensuremath\dashv} + \DeclareUnicodeCharacter{22A4}{\ensuremath\ptextop} + \DeclareUnicodeCharacter{22A5}{\ensuremath\bot} + \DeclareUnicodeCharacter{22A8}{\ensuremath\models} + \DeclareUnicodeCharacter{22B4}{\ensuremath\unlhd} + \DeclareUnicodeCharacter{22B5}{\ensuremath\unrhd} + \DeclareUnicodeCharacter{22C0}{\ensuremath\bigwedge} + \DeclareUnicodeCharacter{22C1}{\ensuremath\bigvee} + \DeclareUnicodeCharacter{22C2}{\ensuremath\bigcap} + \DeclareUnicodeCharacter{22C3}{\ensuremath\bigcup} + \DeclareUnicodeCharacter{22C4}{\ensuremath\diamond} + \DeclareUnicodeCharacter{22C5}{\ensuremath\cdot} + \DeclareUnicodeCharacter{22C6}{\ensuremath\star} + \DeclareUnicodeCharacter{22C8}{\ensuremath\bowtie} + \DeclareUnicodeCharacter{2308}{\ensuremath\lceil} + \DeclareUnicodeCharacter{2309}{\ensuremath\rceil} + \DeclareUnicodeCharacter{230A}{\ensuremath\lfloor} + \DeclareUnicodeCharacter{230B}{\ensuremath\rfloor} + \DeclareUnicodeCharacter{2322}{\ensuremath\frown} + \DeclareUnicodeCharacter{2323}{\ensuremath\smile} + + \DeclareUnicodeCharacter{25A1}{\ensuremath\Box} + \DeclareUnicodeCharacter{25B3}{\ensuremath\triangle} + \DeclareUnicodeCharacter{25B7}{\ensuremath\triangleright} + \DeclareUnicodeCharacter{25BD}{\ensuremath\bigtriangledown} + \DeclareUnicodeCharacter{25C1}{\ensuremath\triangleleft} + \DeclareUnicodeCharacter{25C7}{\ensuremath\Diamond} + \DeclareUnicodeCharacter{2660}{\ensuremath\spadesuit} + \DeclareUnicodeCharacter{2661}{\ensuremath\heartsuit} + \DeclareUnicodeCharacter{2662}{\ensuremath\diamondsuit} + \DeclareUnicodeCharacter{2663}{\ensuremath\clubsuit} + \DeclareUnicodeCharacter{266D}{\ensuremath\flat} + \DeclareUnicodeCharacter{266E}{\ensuremath\natural} + \DeclareUnicodeCharacter{266F}{\ensuremath\sharp} + \DeclareUnicodeCharacter{26AA}{\ensuremath\bigcirc} + \DeclareUnicodeCharacter{27B9}{\ensuremath\rangle} + \DeclareUnicodeCharacter{27C2}{\ensuremath\perp} + \DeclareUnicodeCharacter{27E8}{\ensuremath\langle} + \DeclareUnicodeCharacter{27F5}{\ensuremath\longleftarrow} + \DeclareUnicodeCharacter{27F6}{\ensuremath\longrightarrow} + \DeclareUnicodeCharacter{27F7}{\ensuremath\longleftrightarrow} + \DeclareUnicodeCharacter{27FC}{\ensuremath\longmapsto} + \DeclareUnicodeCharacter{29F5}{\ensuremath\setminus} + \DeclareUnicodeCharacter{2A00}{\ensuremath\bigodot} + \DeclareUnicodeCharacter{2A01}{\ensuremath\bigoplus} + \DeclareUnicodeCharacter{2A02}{\ensuremath\bigotimes} + \DeclareUnicodeCharacter{2A04}{\ensuremath\biguplus} + \DeclareUnicodeCharacter{2A06}{\ensuremath\bigsqcup} + \DeclareUnicodeCharacter{2A1D}{\ensuremath\Join} + \DeclareUnicodeCharacter{2A3F}{\ensuremath\amalg} + \DeclareUnicodeCharacter{2AAF}{\ensuremath\preceq} + \DeclareUnicodeCharacter{2AB0}{\ensuremath\succeq} + + \global\mathchardef\checkmark="1370 % actually the square root sign + \DeclareUnicodeCharacter{2713}{\ensuremath\checkmark} +}% end of \utfeightchardefs + +% US-ASCII character definitions. +\def\asciichardefs{% nothing need be done + \relax +} + +% Latin1 (ISO-8859-1) character definitions. +\def\nonasciistringdefs{% + \setnonasciicharscatcode\active + \def\defstringchar##1{\def##1{\string##1}}% + % + \defstringchar^^80\defstringchar^^81\defstringchar^^82\defstringchar^^83% + \defstringchar^^84\defstringchar^^85\defstringchar^^86\defstringchar^^87% + \defstringchar^^88\defstringchar^^89\defstringchar^^8a\defstringchar^^8b% + \defstringchar^^8c\defstringchar^^8d\defstringchar^^8e\defstringchar^^8f% + % + \defstringchar^^90\defstringchar^^91\defstringchar^^92\defstringchar^^93% + \defstringchar^^94\defstringchar^^95\defstringchar^^96\defstringchar^^97% + \defstringchar^^98\defstringchar^^99\defstringchar^^9a\defstringchar^^9b% + \defstringchar^^9c\defstringchar^^9d\defstringchar^^9e\defstringchar^^9f% + % + \defstringchar^^a0\defstringchar^^a1\defstringchar^^a2\defstringchar^^a3% + \defstringchar^^a4\defstringchar^^a5\defstringchar^^a6\defstringchar^^a7% + \defstringchar^^a8\defstringchar^^a9\defstringchar^^aa\defstringchar^^ab% + \defstringchar^^ac\defstringchar^^ad\defstringchar^^ae\defstringchar^^af% + % + \defstringchar^^b0\defstringchar^^b1\defstringchar^^b2\defstringchar^^b3% + \defstringchar^^b4\defstringchar^^b5\defstringchar^^b6\defstringchar^^b7% + \defstringchar^^b8\defstringchar^^b9\defstringchar^^ba\defstringchar^^bb% + \defstringchar^^bc\defstringchar^^bd\defstringchar^^be\defstringchar^^bf% + % + \defstringchar^^c0\defstringchar^^c1\defstringchar^^c2\defstringchar^^c3% + \defstringchar^^c4\defstringchar^^c5\defstringchar^^c6\defstringchar^^c7% + \defstringchar^^c8\defstringchar^^c9\defstringchar^^ca\defstringchar^^cb% + \defstringchar^^cc\defstringchar^^cd\defstringchar^^ce\defstringchar^^cf% + % + \defstringchar^^d0\defstringchar^^d1\defstringchar^^d2\defstringchar^^d3% + \defstringchar^^d4\defstringchar^^d5\defstringchar^^d6\defstringchar^^d7% + \defstringchar^^d8\defstringchar^^d9\defstringchar^^da\defstringchar^^db% + \defstringchar^^dc\defstringchar^^dd\defstringchar^^de\defstringchar^^df% + % + \defstringchar^^e0\defstringchar^^e1\defstringchar^^e2\defstringchar^^e3% + \defstringchar^^e4\defstringchar^^e5\defstringchar^^e6\defstringchar^^e7% + \defstringchar^^e8\defstringchar^^e9\defstringchar^^ea\defstringchar^^eb% + \defstringchar^^ec\defstringchar^^ed\defstringchar^^ee\defstringchar^^ef% + % + \defstringchar^^f0\defstringchar^^f1\defstringchar^^f2\defstringchar^^f3% + \defstringchar^^f4\defstringchar^^f5\defstringchar^^f6\defstringchar^^f7% + \defstringchar^^f8\defstringchar^^f9\defstringchar^^fa\defstringchar^^fb% + \defstringchar^^fc\defstringchar^^fd\defstringchar^^fe\defstringchar^^ff% +} + + +% define all the unicode characters we know about, for the sake of @U. +\utfeightchardefs + + +% Make non-ASCII characters printable again for compatibility with +% existing Texinfo documents that may use them, even without declaring a +% document encoding. +% +\setnonasciicharscatcode \other + + +\message{formatting,} + +\newdimen\defaultparindent \defaultparindent = 15pt + +\chapheadingskip = 15pt plus 4pt minus 2pt +\secheadingskip = 12pt plus 3pt minus 2pt +\subsecheadingskip = 9pt plus 2pt minus 2pt + +% Prevent underfull vbox error messages. +\vbadness = 10000 + +% Don't be very finicky about underfull hboxes, either. +\hbadness = 6666 + +% Following George Bush, get rid of widows and orphans. +\widowpenalty=10000 +\clubpenalty=10000 + +% Use TeX 3.0's \emergencystretch to help line breaking, but if we're +% using an old version of TeX, don't do anything. We want the amount of +% stretch added to depend on the line length, hence the dependence on +% \hsize. We call this whenever the paper size is set. +% +\def\setemergencystretch{% + \ifx\emergencystretch\thisisundefined + % Allow us to assign to \emergencystretch anyway. + \def\emergencystretch{\dimen0}% + \else + \emergencystretch = .15\hsize + \fi +} + +% Parameters in order: 1) textheight; 2) textwidth; +% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip; +% 7) physical page height; 8) physical page width. +% +% We also call \setleading{\textleading}, so the caller should define +% \textleading. The caller should also set \parskip. +% +\def\internalpagesizes#1#2#3#4#5#6#7#8{% + \voffset = #3\relax + \topskip = #6\relax + \splittopskip = \topskip + % + \vsize = #1\relax + \advance\vsize by \topskip + \outervsize = \vsize + \advance\outervsize by 2\topandbottommargin + \pageheight = \vsize + % + \hsize = #2\relax + \outerhsize = \hsize + \advance\outerhsize by 0.5in + \pagewidth = \hsize + % + \normaloffset = #4\relax + \bindingoffset = #5\relax + % + \ifpdf + \pdfpageheight #7\relax + \pdfpagewidth #8\relax + % if we don't reset these, they will remain at "1 true in" of + % whatever layout pdftex was dumped with. + \pdfhorigin = 1 true in + \pdfvorigin = 1 true in + \fi + % + \setleading{\textleading} + % + \parindent = \defaultparindent + \setemergencystretch +} + +% @letterpaper (the default). +\def\letterpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt + % + % If page is nothing but text, make it come out even. + \internalpagesizes{607.2pt}{6in}% that's 46 lines + {\voffset}{.25in}% + {\bindingoffset}{36pt}% + {11in}{8.5in}% +}} + +% Use @smallbook to reset parameters for 7x9.25 trim size. +\def\smallbook{{\globaldefs = 1 + \parskip = 2pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.5in}{5in}% + {-.2in}{0in}% + {\bindingoffset}{16pt}% + {9.25in}{7in}% + % + \lispnarrowing = 0.3in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .5cm +}} + +% Use @smallerbook to reset parameters for 6x9 trim size. +% (Just testing, parameters still in flux.) +\def\smallerbook{{\globaldefs = 1 + \parskip = 1.5pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.4in}{4.8in}% + {-.2in}{-.4in}% + {0pt}{14pt}% + {9in}{6in}% + % + \lispnarrowing = 0.25in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .4cm +}} + +% Use @afourpaper to print on European A4 paper. +\def\afourpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt + % + % Double-side printing via postscript on Laserjet 4050 + % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm. + % To change the settings for a different printer or situation, adjust + % \normaloffset until the front-side and back-side texts align. Then + % do the same for \bindingoffset. You can set these for testing in + % your texinfo source file like this: + % @tex + % \global\normaloffset = -6mm + % \global\bindingoffset = 10mm + % @end tex + \internalpagesizes{673.2pt}{160mm}% that's 51 lines + {\voffset}{\hoffset}% + {\bindingoffset}{44pt}% + {297mm}{210mm}% + % + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = 5mm +}} + +% Use @afivepaper to print on European A5 paper. +% From romildo@urano.iceb.ufop.br, 2 July 2000. +% He also recommends making @example and @lisp be small. +\def\afivepaper{{\globaldefs = 1 + \parskip = 2pt plus 1pt minus 0.1pt + \textleading = 12.5pt + % + \internalpagesizes{160mm}{120mm}% + {\voffset}{\hoffset}% + {\bindingoffset}{8pt}% + {210mm}{148mm}% + % + \lispnarrowing = 0.2in + \tolerance = 800 + \hfuzz = 1.2pt + \contentsrightmargin = 0pt + \defbodyindent = 2mm + \tableindent = 12mm +}} + +% A specific text layout, 24x15cm overall, intended for A4 paper. +\def\afourlatex{{\globaldefs = 1 + \afourpaper + \internalpagesizes{237mm}{150mm}% + {\voffset}{4.6mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% + % + % Must explicitly reset to 0 because we call \afourpaper. + \globaldefs = 0 +}} + +% Use @afourwide to print on A4 paper in landscape format. +\def\afourwide{{\globaldefs = 1 + \afourpaper + \internalpagesizes{241mm}{165mm}% + {\voffset}{-2.95mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% + \globaldefs = 0 +}} + +% @pagesizes TEXTHEIGHT[,TEXTWIDTH] +% Perhaps we should allow setting the margins, \topskip, \parskip, +% and/or leading, also. Or perhaps we should compute them somehow. +% +\parseargdef\pagesizes{\pagesizesyyy #1,,\finish} +\def\pagesizesyyy#1,#2,#3\finish{{% + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi + \globaldefs = 1 + % + \parskip = 3pt plus 2pt minus 1pt + \setleading{\textleading}% + % + \dimen0 = #1\relax + \advance\dimen0 by \voffset + % + \dimen2 = \hsize + \advance\dimen2 by \normaloffset + % + \internalpagesizes{#1}{\hsize}% + {\voffset}{\normaloffset}% + {\bindingoffset}{44pt}% + {\dimen0}{\dimen2}% +}} + +% Set default to letter. +% +\letterpaper + + +\message{and turning on texinfo input format.} + +\def^^L{\par} % remove \outer, so ^L can appear in an @comment + +% DEL is a comment character, in case @c does not suffice. +\catcode`\^^? = 14 + +% Define macros to output various characters with catcode for normal text. +\catcode`\"=\other \def\normaldoublequote{"} +\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix +\catcode`\+=\other \def\normalplus{+} +\catcode`\<=\other \def\normalless{<} +\catcode`\>=\other \def\normalgreater{>} +\catcode`\^=\other \def\normalcaret{^} +\catcode`\_=\other \def\normalunderscore{_} +\catcode`\|=\other \def\normalverticalbar{|} +\catcode`\~=\other \def\normaltilde{~} + +% This macro is used to make a character print one way in \tt +% (where it can probably be output as-is), and another way in other fonts, +% where something hairier probably needs to be done. +% +% #1 is what to print if we are indeed using \tt; #2 is what to print +% otherwise. Since all the Computer Modern typewriter fonts have zero +% interword stretch (and shrink), and it is reasonable to expect all +% typewriter fonts to have this, we can check that font parameter. +% +\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi} + +% Same as above, but check for italic font. Actually this also catches +% non-italic slanted fonts since it is impossible to distinguish them from +% italic fonts. But since this is only used by $ and it uses \sl anyway +% this is not a problem. +\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi} + +% Turn off all special characters except @ +% (and those which the user can use as if they were ordinary). +% Most of these we simply print from the \tt font, but for some, we can +% use math or other variants that look better in normal text. + +\catcode`\"=\active +\def\activedoublequote{{\tt\char34}} +\let"=\activedoublequote +\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde +\chardef\hatchar=`\^ +\catcode`\^=\active \def\activehat{{\tt \hatchar}} \let^ = \activehat + +\catcode`\_=\active +\def_{\ifusingtt\normalunderscore\_} +\let\realunder=_ +% Subroutine for the previous macro. +\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } + +\catcode`\|=\active +\def|{{\tt\char124}} + +\chardef \less=`\< +\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless +\chardef \gtr=`\> +\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr +\catcode`\+=\active \def+{{\tt \char 43}} +\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix +\catcode`\-=\active \let-=\normaldash + + +% used for headline/footline in the output routine, in case the page +% breaks in the middle of an @tex block. +\def\texinfochars{% + \let< = \activeless + \let> = \activegtr + \let~ = \activetilde + \let^ = \activehat + \markupsetuplqdefault \markupsetuprqdefault + \let\b = \strong + \let\i = \smartitalic + % in principle, all other definitions in \tex have to be undone too. +} + +% Used sometimes to turn off (effectively) the active characters even after +% parsing them. +\def\turnoffactive{% + \normalturnoffactive + \otherbackslash +} + +\catcode`\@=0 + +% \backslashcurfont outputs one backslash character in current font, +% as in \char`\\. +\global\chardef\backslashcurfont=`\\ +\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work + +% \realbackslash is an actual character `\' with catcode other, and +% \doublebackslash is two of them (for the pdf outlines). +{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} + +% In Texinfo, backslash is an active character; it prints the backslash +% in fixed width font. +\catcode`\\=\active % @ for escape char from now on. + +% Print a typewriter backslash. For math mode, we can't simply use +% \backslashcurfont: the story here is that in math mode, the \char +% of \backslashcurfont ends up printing the roman \ from the math symbol +% font (because \char in math mode uses the \mathcode, and plain.tex +% sets \mathcode`\\="026E). Hence we use an explicit \mathchar, +% which is the decimal equivalent of "715c (class 7, e.g., use \fam; +% ignored family value; char position "5C). We can't use " for the +% usual hex value because it has already been made active. + +@def@ttbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}} +@let@backslashchar = @ttbackslash % @backslashchar{} is for user documents. + +% \rawbackslash defines an active \ to do \backslashcurfont. +% \otherbackslash defines an active \ to be a literal `\' character with +% catcode other. We switch back and forth between these. +@gdef@rawbackslash{@let\=@backslashcurfont} +@gdef@otherbackslash{@let\=@realbackslash} + +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. +% +{@catcode`- = @active + @gdef@normalturnoffactive{% + @nonasciistringdefs + @let-=@normaldash + @let"=@normaldoublequote + @let$=@normaldollar %$ font-lock fix + @let+=@normalplus + @let<=@normalless + @let>=@normalgreater + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let~=@normaltilde + @let\=@ttbackslash + @markupsetuplqdefault + @markupsetuprqdefault + @unsepspaces + } +} + +% If a .fmt file is being used, characters that might appear in a file +% name cannot be active until we have parsed the command line. +% So turn them off again, and have @fixbackslash turn them back on. +@catcode`+=@other @catcode`@_=@other + +% \enablebackslashhack - allow file to begin `\input texinfo' +% +% If a .fmt file is being used, we don't want the `\input texinfo' to show up. +% That is what \eatinput is for; after that, the `\' should revert to printing +% a backslash. +% If the file did not have a `\input texinfo', then it is turned off after +% the first line; otherwise the first `\' in the file would cause an error. +% This is used on the very last line of this file, texinfo.tex. +% We also use @c to call @fixbackslash, in case ends of lines are hidden. +{ +@catcode`@^=7 +@catcode`@^^M=13@gdef@enablebackslashhack{% + @global@let\ = @eatinput% + @catcode`@^^M=13% + @def@c{@fixbackslash@c}% + @def ^^M{@let^^M@secondlinenl}% + @gdef @secondlinenl{@let^^M@thirdlinenl}% + @gdef @thirdlinenl{@fixbackslash}% +}} + +{@catcode`@^=7 @catcode`@^^M=13% +@gdef@eatinput input texinfo#1^^M{@fixbackslash}} + +@gdef@fixbackslash{% + @ifx\@eatinput @let\ = @ttbackslash @fi + @catcode13=5 % regular end of line + @let@c=@texinfoc + % Also turn back on active characters that might appear in the input + % file name, in case not using a pre-dumped format. + @catcode`+=@active + @catcode`@_=@active + % + % If texinfo.cnf is present on the system, read it. + % Useful for site-wide @afourpaper, etc. This macro, @fixbackslash, gets + % called at the beginning of every Texinfo file. Not opening texinfo.cnf + % directly in this file, texinfo.tex, makes it possible to make a format + % file for Texinfo. + % + @openin 1 texinfo.cnf + @ifeof 1 @else @input texinfo.cnf @fi + @closein 1 +} + + +% Say @foo, not \foo, in error messages. +@escapechar = `@@ + +% These (along with & and #) are made active for url-breaking, so need +% active definitions as the normal characters. +@def@normaldot{.} +@def@normalquest{?} +@def@normalslash{/} + +% These look ok in all fonts, so just make them not special. +% @hashchar{} gets its own user-level command, because of #line. +@catcode`@& = @other @def@normalamp{&} +@catcode`@# = @other @def@normalhash{#} +@catcode`@% = @other @def@normalpercent{%} + +@let @hashchar = @normalhash + +@c Finally, make ` and ' active, so that txicodequoteundirected and +@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we +@c don't make ` and ' active, @code will not get them as active chars. +@c Do this last of all since we use ` in the previous @catcode assignments. +@catcode`@'=@active +@catcode`@`=@active +@markupsetuplqdefault +@markupsetuprqdefault + +@c Local variables: +@c eval: (add-hook 'write-file-hooks 'time-stamp) +@c page-delimiter: "^\\\\message\\|emacs-page" +@c time-stamp-start: "def\\\\texinfoversion{" +@c time-stamp-format: "%:y-%02m-%02d.%02H" +@c time-stamp-end: "}" +@c End: + +@c vim:sw=2: + +@ignore + arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 +@end ignore +@enablebackslashhack -- cgit v1.2.3