diff options
Diffstat (limited to 'tests/grouptools/groupadd/05_groupadd_set_GID')
10 files changed, 599 insertions, 0 deletions
diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/config.txt b/tests/grouptools/groupadd/05_groupadd_set_GID/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/default/useradd b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/group b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/gshadow b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/login.defs b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/login.defs new file mode 100644 index 0000000..84fb3cc --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/login.defs @@ -0,0 +1,315 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up his/her +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overriden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default in no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivelants of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#CRACKLIB_DICTPATH +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/passwd b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/shadow b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/data/group b/tests/grouptools/groupadd/05_groupadd_set_GID/data/group new file mode 100644 index 0000000..3bd92e7 --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/data/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:1500: diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/data/gshadow b/tests/grouptools/groupadd/05_groupadd_set_GID/data/gshadow new file mode 100644 index 0000000..bfc0675 --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/data/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:!:: diff --git a/tests/grouptools/groupadd/05_groupadd_set_GID/groupadd.test b/tests/grouptools/groupadd/05_groupadd_set_GID/groupadd.test new file mode 100755 index 0000000..306767b --- /dev/null +++ b/tests/grouptools/groupadd/05_groupadd_set_GID/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can add a group and set the GID" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo with GID 1500 (groupadd -p 1500 foo)..." +groupadd -g 1500 foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + |