diff options
Diffstat (limited to 'tests/usertools/02')
22 files changed, 685 insertions, 0 deletions
diff --git a/tests/usertools/02/config.txt b/tests/usertools/02/config.txt new file mode 100644 index 0000000..aecff4a --- /dev/null +++ b/tests/usertools/02/config.txt @@ -0,0 +1,3 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz diff --git a/tests/usertools/02/config/etc/default/useradd b/tests/usertools/02/config/etc/default/useradd new file mode 100644 index 0000000..a834fef --- /dev/null +++ b/tests/usertools/02/config/etc/default/useradd @@ -0,0 +1,37 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/sh +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +# GROUP=100 +# +# The default home directory. Same as DHOME for adduser +# HOME=/home +# +# The number of days after a password expires until the account +# is permanently disabled +# INACTIVE=-1 +# +# The default expire date +# EXPIRE= +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes + diff --git a/tests/usertools/02/config/etc/group b/tests/usertools/02/config/etc/group new file mode 100644 index 0000000..245cc9c --- /dev/null +++ b/tests/usertools/02/config/etc/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +myuser:x:424242: diff --git a/tests/usertools/02/config/etc/gshadow b/tests/usertools/02/config/etc/gshadow new file mode 100644 index 0000000..25bd55b --- /dev/null +++ b/tests/usertools/02/config/etc/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +myuser:x:: diff --git a/tests/usertools/02/config/etc/passwd b/tests/usertools/02/config/etc/passwd new file mode 100644 index 0000000..6eefe5a --- /dev/null +++ b/tests/usertools/02/config/etc/passwd @@ -0,0 +1,21 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false +myuser:x:424242:424242::/home:/bin/bash +testsuite::424243:424243::/home:/bin/bash diff --git a/tests/usertools/02/config/etc/shadow b/tests/usertools/02/config/etc/shadow new file mode 100644 index 0000000..038d5cf --- /dev/null +++ b/tests/usertools/02/config/etc/shadow @@ -0,0 +1,20 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: +myuser:$1$yQnIAZWV$gDAMB2IkqaONgrQiRdo4y.:12991:0:99999:7::: diff --git a/tests/usertools/02/data/useradd-D.out b/tests/usertools/02/data/useradd-D.out new file mode 100644 index 0000000..a3f48f3 --- /dev/null +++ b/tests/usertools/02/data/useradd-D.out @@ -0,0 +1,7 @@ +GROUP=100 +HOME=/home +INACTIVE=-1 +EXPIRE= +SHELL=/bin/sh +SKEL=/etc/skel +CREATE_MAIL_SPOOL=no diff --git a/tests/usertools/02/data/useradd-D_default_values.out b/tests/usertools/02/data/useradd-D_default_values.out new file mode 100644 index 0000000..1eb58e2 --- /dev/null +++ b/tests/usertools/02/data/useradd-D_default_values.out @@ -0,0 +1,7 @@ +GROUP=100 +HOME=/home +INACTIVE=-1 +EXPIRE= +SHELL= +SKEL=/etc/skel +CREATE_MAIL_SPOOL=no diff --git a/tests/usertools/02/useradd_change_default_EXPIRE.test b/tests/usertools/02/useradd_change_default_EXPIRE.test new file mode 100755 index 0000000..6901603 --- /dev/null +++ b/tests/usertools/02/useradd_change_default_EXPIRE.test @@ -0,0 +1,30 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../common/config.sh +. ../../common/log.sh + +log_start "$0" "useradd -D: get default values" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Change default shell (useradd -D --expiredate 1979-11-24)..." +useradd -D --expiredate 1979-11-24 +echo "OK" + +echo -n "Check the default values..." +diff -au useradd_change_default_EXPIRE/useradd.default /etc/default/useradd +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/usertools/02/useradd_change_default_EXPIRE/useradd.default b/tests/usertools/02/useradd_change_default_EXPIRE/useradd.default new file mode 100644 index 0000000..aa3cd2b --- /dev/null +++ b/tests/usertools/02/useradd_change_default_EXPIRE/useradd.default @@ -0,0 +1,43 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/sh +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +# GROUP=100 +# +# The default home directory. Same as DHOME for adduser +# HOME=/home +# +# The number of days after a password expires until the account +# is permanently disabled +# INACTIVE=-1 +# +# The default expire date +# EXPIRE= +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes + +GROUP=100 +HOME=/home +INACTIVE=-1 +EXPIRE=1979-11-24 +SKEL=/etc/skel +CREATE_MAIL_SPOOL=no diff --git a/tests/usertools/02/useradd_change_default_GROUP.test b/tests/usertools/02/useradd_change_default_GROUP.test new file mode 100755 index 0000000..07ea62b --- /dev/null +++ b/tests/usertools/02/useradd_change_default_GROUP.test @@ -0,0 +1,30 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../common/config.sh +. ../../common/log.sh + +log_start "$0" "useradd -D: get default values" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Change default shell (useradd -D --gid nogroup)..." +useradd -D --gid nogroup +echo "OK" + +echo -n "Check the default values..." +diff -au useradd_change_default_GROUP/useradd.default /etc/default/useradd +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/usertools/02/useradd_change_default_GROUP/useradd.default b/tests/usertools/02/useradd_change_default_GROUP/useradd.default new file mode 100644 index 0000000..c26a28b --- /dev/null +++ b/tests/usertools/02/useradd_change_default_GROUP/useradd.default @@ -0,0 +1,43 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/sh +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +# GROUP=100 +# +# The default home directory. Same as DHOME for adduser +# HOME=/home +# +# The number of days after a password expires until the account +# is permanently disabled +# INACTIVE=-1 +# +# The default expire date +# EXPIRE= +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes + +GROUP=65534 +HOME=/home +INACTIVE=-1 +EXPIRE= +SKEL=/etc/skel +CREATE_MAIL_SPOOL=no diff --git a/tests/usertools/02/useradd_change_default_HOME.test b/tests/usertools/02/useradd_change_default_HOME.test new file mode 100755 index 0000000..8d8357c --- /dev/null +++ b/tests/usertools/02/useradd_change_default_HOME.test @@ -0,0 +1,30 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../common/config.sh +. ../../common/log.sh + +log_start "$0" "useradd -D: get default values" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Change default shell (useradd -D --base-dir /tmp)..." +useradd -D --base-dir /tmp +echo "OK" + +echo -n "Check the default values..." +diff -au useradd_change_default_HOME/useradd.default /etc/default/useradd +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/usertools/02/useradd_change_default_HOME/useradd.default b/tests/usertools/02/useradd_change_default_HOME/useradd.default new file mode 100644 index 0000000..75953c6 --- /dev/null +++ b/tests/usertools/02/useradd_change_default_HOME/useradd.default @@ -0,0 +1,43 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/sh +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +# GROUP=100 +# +# The default home directory. Same as DHOME for adduser +# HOME=/home +# +# The number of days after a password expires until the account +# is permanently disabled +# INACTIVE=-1 +# +# The default expire date +# EXPIRE= +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes + +GROUP=100 +HOME=/tmp +INACTIVE=-1 +EXPIRE= +SKEL=/etc/skel +CREATE_MAIL_SPOOL=no diff --git a/tests/usertools/02/useradd_change_default_INACTIVE.test b/tests/usertools/02/useradd_change_default_INACTIVE.test new file mode 100755 index 0000000..7257439 --- /dev/null +++ b/tests/usertools/02/useradd_change_default_INACTIVE.test @@ -0,0 +1,30 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../common/config.sh +. ../../common/log.sh + +log_start "$0" "useradd -D: get default values" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Change default shell (useradd -D --inactive 10)..." +useradd -D --inactive 10 +echo "OK" + +echo -n "Check the default values..." +diff -au useradd_change_default_INACTIVE/useradd.default /etc/default/useradd +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/usertools/02/useradd_change_default_INACTIVE/useradd.default b/tests/usertools/02/useradd_change_default_INACTIVE/useradd.default new file mode 100644 index 0000000..fc2f084 --- /dev/null +++ b/tests/usertools/02/useradd_change_default_INACTIVE/useradd.default @@ -0,0 +1,43 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/sh +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +# GROUP=100 +# +# The default home directory. Same as DHOME for adduser +# HOME=/home +# +# The number of days after a password expires until the account +# is permanently disabled +# INACTIVE=-1 +# +# The default expire date +# EXPIRE= +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes + +GROUP=100 +HOME=/home +INACTIVE=10 +EXPIRE= +SKEL=/etc/skel +CREATE_MAIL_SPOOL=no diff --git a/tests/usertools/02/useradd_change_default_SHELL.test b/tests/usertools/02/useradd_change_default_SHELL.test new file mode 100755 index 0000000..d6c22dc --- /dev/null +++ b/tests/usertools/02/useradd_change_default_SHELL.test @@ -0,0 +1,30 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../common/config.sh +. ../../common/log.sh + +log_start "$0" "useradd -D: get default values" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Change default shell (useradd -D --shell /bin/foobar)..." +useradd -D --shell /bin/foobar +echo "OK" + +echo -n "Check the default values..." +diff -au useradd_change_default_SHELL/useradd.default /etc/default/useradd +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/usertools/02/useradd_change_default_SHELL/useradd.default b/tests/usertools/02/useradd_change_default_SHELL/useradd.default new file mode 100644 index 0000000..421f1a0 --- /dev/null +++ b/tests/usertools/02/useradd_change_default_SHELL/useradd.default @@ -0,0 +1,43 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +# GROUP=100 +# +# The default home directory. Same as DHOME for adduser +# HOME=/home +# +# The number of days after a password expires until the account +# is permanently disabled +# INACTIVE=-1 +# +# The default expire date +# EXPIRE= +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes + +GROUP=100 +HOME=/home +INACTIVE=-1 +EXPIRE= +SKEL=/etc/skel +CREATE_MAIL_SPOOL=no diff --git a/tests/usertools/02/useradd_change_defaults.test b/tests/usertools/02/useradd_change_defaults.test new file mode 100755 index 0000000..665a995 --- /dev/null +++ b/tests/usertools/02/useradd_change_defaults.test @@ -0,0 +1,30 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../common/config.sh +. ../../common/log.sh + +log_start "$0" "useradd -D: set all default values" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Change useradd defaults..." +useradd -D -b /var/tmp -e 1979-11-24 -f 12 -g 1 -s /usr/bin/foobar +echo "OK" + +echo -n "Check the default values..." +diff -au useradd_change_defaults/useradd.default /etc/default/useradd +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/usertools/02/useradd_change_defaults/useradd.default b/tests/usertools/02/useradd_change_defaults/useradd.default new file mode 100644 index 0000000..9edb781 --- /dev/null +++ b/tests/usertools/02/useradd_change_defaults/useradd.default @@ -0,0 +1,43 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/usr/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +# GROUP=100 +# +# The default home directory. Same as DHOME for adduser +# HOME=/home +# +# The number of days after a password expires until the account +# is permanently disabled +# INACTIVE=-1 +# +# The default expire date +# EXPIRE= +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes + +GROUP=1 +HOME=/var/tmp +INACTIVE=12 +EXPIRE=1979-11-24 +SKEL=/etc/skel +CREATE_MAIL_SPOOL=no diff --git a/tests/usertools/02/useradd_default_default_values.test b/tests/usertools/02/useradd_default_default_values.test new file mode 100755 index 0000000..4c6cf0e --- /dev/null +++ b/tests/usertools/02/useradd_default_default_values.test @@ -0,0 +1,36 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../common/config.sh +. ../../common/log.sh + +log_start "$0" "useradd -D: get default values" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Remove /etc/default/useradd..." +rm -f /etc/default/useradd +echo "OK" + +echo -n "Get default values: 'useradd -D > tmp/out'..." +useradd -D > tmp/out +echo "OK" + +echo -n "Check the default values..." +diff -au data/useradd-D_default_values.out tmp/out +echo "OK" + +rm -f tmp/out + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/usertools/02/useradd_get_default_values.test b/tests/usertools/02/useradd_get_default_values.test new file mode 100755 index 0000000..a18fb04 --- /dev/null +++ b/tests/usertools/02/useradd_get_default_values.test @@ -0,0 +1,32 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../common/config.sh +. ../../common/log.sh + +log_start "$0" "useradd -D: get default values" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Get default values: 'useradd -D > tmp/out'..." +useradd -D > tmp/out +echo "OK" + +echo -n "Check the default values..." +diff -au data/useradd-D.out tmp/out +echo "OK" + +rm -f tmp/out + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + |