diff options
Diffstat (limited to '')
| -rw-r--r-- | examples/Makefile.in | 100 | ||||
| -rw-r--r-- | examples/pam.conf | 30 | ||||
| -rw-r--r-- | examples/sudo.conf | 72 | ||||
| -rw-r--r-- | examples/sudoers | 133 | ||||
| -rw-r--r-- | examples/syslog.conf | 26 |
5 files changed, 361 insertions, 0 deletions
diff --git a/examples/Makefile.in b/examples/Makefile.in new file mode 100644 index 0000000..bb9e533 --- /dev/null +++ b/examples/Makefile.in @@ -0,0 +1,100 @@ +# +# Copyright (c) 2014, 2017-2018 Todd C. Miller <Todd.Miller@sudo.ws> +# +# Permission to use, copy, modify, and distribute this software for any +# purpose with or without fee is hereby granted, provided that the above +# copyright notice and this permission notice appear in all copies. +# +# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +# +# @configure_input@ +# + +#### Start of system configuration section. #### + +srcdir = @srcdir@ +docdir = @docdir@ +exampledir = @exampledir@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Our install program supports extra flags... +INSTALL = $(SHELL) $(top_srcdir)/install-sh -c +INSTALL_OWNER = -o $(install_uid) -g $(install_gid) + +# Where to install things... +prefix = @prefix@ +exec_prefix = @exec_prefix@ +bindir = @bindir@ +sbindir = @sbindir@ +sysconfdir = @sysconfdir@ +libexecdir = @libexecdir@ +datarootdir = @datarootdir@ +localstatedir = @localstatedir@ + +# User and group ids the installed files should be "owned" by +install_uid = 0 +install_gid = 0 + +#### End of system configuration section. #### + +SHELL = @SHELL@ + +EXAMPLES = $(srcdir)/pam.conf $(srcdir)/sudo.conf $(srcdir)/sudoers \ + $(srcdir)/syslog.conf + +VERSION = @PACKAGE_VERSION@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ + +all: $(EXAMPLES) + +Makefile: $(srcdir)/Makefile.in + cd $(top_builddir) && ./config.status --file examples/Makefile + +pre-install: + +install: install-doc + +install-dirs: + $(SHELL) $(top_srcdir)/mkinstalldirs $(DESTDIR)$(exampledir) + +install-binaries: + +install-includes: + +install-doc: install-dirs + for f in $(EXAMPLES); do $(INSTALL) $(INSTALL_OWNER) -m 0644 $$f $(DESTDIR)$(exampledir); done + +install-plugin: + +uninstall: + -rm -rf $(DESTDIR)$(exampledir) + +splint: + +cppcheck: + +pvs-log-files: + +pvs-studio: + +check: + +clean: + +mostlyclean: clean + +distclean: clean + -rm -rf Makefile + +clobber: distclean + +realclean: distclean + +cleandir: distclean diff --git a/examples/pam.conf b/examples/pam.conf new file mode 100644 index 0000000..d56e712 --- /dev/null +++ b/examples/pam.conf @@ -0,0 +1,30 @@ +#%PAM-1.0 +# Sample /etc/pam.d/sudo file for RedHat 9 / Fedora Core. +# For other Linux distributions you may want to +# use /etc/pam.d/sshd or /etc/pam.d/su as a guide. +# +# There are two basic ways to configure PAM, either via pam_stack +# or by explicitly specifying the various methods to use. +# +# Here we use pam_stack +auth required pam_stack.so service=system-auth +account required pam_stack.so service=system-auth +password required pam_stack.so service=system-auth +session required pam_stack.so service=system-auth +# +# Alternately, you can specify the authentication method directly. +# Here we use pam_unix for normal password authentication. +#auth required pam_env.so +#auth sufficient pam_unix.so +#account required pam_unix.so +#password required pam_cracklib.so retry=3 type= +#password required pam_unix.so nullok use_authtok md5 shadow +#session required pam_limits.so +#session required pam_unix.so +# +# Another option is to use SMB for authentication. +#auth required pam_env.so +#auth sufficient pam_smb_auth.so +#account required pam_smb_auth.so +#password required pam_smb_auth.so +#session required pam_limits.so diff --git a/examples/sudo.conf b/examples/sudo.conf new file mode 100644 index 0000000..c605bb5 --- /dev/null +++ b/examples/sudo.conf @@ -0,0 +1,72 @@ +# +# Sample /etc/sudo.conf file +# +# Format: +# Plugin plugin_name plugin_path plugin_options ... +# Path askpass /path/to/askpass +# Path noexec /path/to/sudo_noexec.so +# Debug sudo /var/log/sudo_debug all@warn +# Set disable_coredump true +# +# Sudo plugins: +# +# The plugin_path is relative to ${prefix}/libexec unless fully qualified. +# The plugin_name corresponds to a global symbol in the plugin +# that contains the plugin interface structure. +# The plugin_options are optional. +# +# The sudoers plugin is used by default if no Plugin lines are present. +Plugin sudoers_policy sudoers.so +Plugin sudoers_io sudoers.so + +# +# Sudo askpass: +# +# An askpass helper program may be specified to provide a graphical +# password prompt for "sudo -A" support. Sudo does not ship with its +# own askpass program but can use the OpenSSH askpass. +# +# Use the OpenSSH askpass +#Path askpass /usr/X11R6/bin/ssh-askpass +# +# Use the Gnome OpenSSH askpass +#Path askpass /usr/libexec/openssh/gnome-ssh-askpass + +# +# Sudo noexec: +# +# Path to a shared library containing dummy versions of the execv(), +# execve() and fexecve() library functions that just return an error. +# This is used to implement the "noexec" functionality on systems that +# support C<LD_PRELOAD> or its equivalent. +# The compiled-in value is usually sufficient and should only be changed +# if you rename or move the sudo_noexec.so file. +# +#Path noexec /usr/libexec/sudo_noexec.so + +# +# Core dumps: +# +# By default, sudo disables core dumps while it is executing (they +# are re-enabled for the command that is run). +# To aid in debugging sudo problems, you may wish to enable core +# dumps by setting "disable_coredump" to false. +# +#Set disable_coredump false + +# +# User groups: +# +# Sudo passes the user's group list to the policy plugin. +# If the user is a member of the maximum number of groups (usually 16), +# sudo will query the group database directly to be sure to include +# the full list of groups. +# +# On some systems, this can be expensive so the behavior is configurable. +# The "group_source" setting has three possible values: +# static - use the user's list of groups returned by the kernel. +# dynamic - query the group database to find the list of groups. +# adaptive - if user is in less than the maximum number of groups. +# use the kernel list, else query the group database. +# +#Set group_source static diff --git a/examples/sudoers b/examples/sudoers new file mode 100644 index 0000000..4d95095 --- /dev/null +++ b/examples/sudoers @@ -0,0 +1,133 @@ +# +# Sample /etc/sudoers file. +# +# This file MUST be edited with the 'visudo' command as root. +# +# See the sudoers man page for the details on how to write a sudoers file. + +## +# Override built-in defaults +## +Defaults syslog=auth +Defaults>root !set_logname +Defaults:FULLTIMERS !lecture +Defaults:millert !authenticate +Defaults@SERVERS log_year, logfile=/var/log/sudo.log +Defaults!PAGERS noexec + +## +# User alias specification +## +User_Alias FULLTIMERS = millert, mikef, dowdy +User_Alias PARTTIMERS = bostley, jwfox, crawl +User_Alias WEBMASTERS = will, wendy, wim + +## +# Runas alias specification +## +Runas_Alias OP = root, operator +Runas_Alias DB = oracle, sybase + +## +# Host alias specification +## +Host_Alias SPARC = bigtime, eclipse, moet, anchor:\ + SGI = grolsch, dandelion, black:\ + ALPHA = widget, thalamus, foobar:\ + HPPA = boa, nag, python +Host_Alias CUNETS = 128.138.0.0/255.255.0.0 +Host_Alias CSNETS = 128.138.243.0, 128.138.204.0/24, 128.138.242.0 +Host_Alias SERVERS = master, mail, www, ns +Host_Alias CDROM = orion, perseus, hercules + +## +# Cmnd alias specification +## +Cmnd_Alias DUMPS = /usr/sbin/dump, /usr/sbin/rdump, /usr/sbin/restore, \ + /usr/sbin/rrestore, /usr/bin/mt, \ + sha224:0GomF8mNN3wlDt1HD9XldjJ3SNgpFdbjO1+NsQ== \ + /home/operator/bin/start_backups +Cmnd_Alias KILL = /usr/bin/kill, /usr/bin/top +Cmnd_Alias PRINTING = /usr/sbin/lpc, /usr/bin/lprm +Cmnd_Alias SHUTDOWN = /usr/sbin/shutdown +Cmnd_Alias HALT = /usr/sbin/halt +Cmnd_Alias REBOOT = /usr/sbin/reboot +Cmnd_Alias SHELLS = /sbin/sh, /usr/bin/sh, /usr/bin/csh, /usr/bin/ksh, \ + /usr/local/bin/tcsh, /usr/bin/rsh, \ + /usr/local/bin/zsh +Cmnd_Alias SU = /usr/bin/su +Cmnd_Alias VIPW = /usr/sbin/vipw, /usr/bin/passwd, /usr/bin/chsh, \ + /usr/bin/chfn +Cmnd_Alias PAGERS = /usr/bin/more, /usr/bin/pg, /usr/bin/less + +## +# User specification +## + +# root and users in group wheel can run anything on any machine as any user +root ALL = (ALL) ALL +%wheel ALL = (ALL) ALL + +# full time sysadmins can run anything on any machine without a password +FULLTIMERS ALL = NOPASSWD: ALL + +# part time sysadmins may run anything but need a password +PARTTIMERS ALL = ALL + +# jack may run anything on machines in CSNETS +jack CSNETS = ALL + +# lisa may run any command on any host in CUNETS (a class B network) +lisa CUNETS = ALL + +# operator may run maintenance commands and anything in /usr/oper/bin/ +operator ALL = DUMPS, KILL, SHUTDOWN, HALT, REBOOT, PRINTING,\ + sudoedit /etc/printcap, /usr/oper/bin/ + +# joe may su only to operator +joe ALL = /usr/bin/su operator + +# pete may change passwords for anyone but root on the hp snakes +pete HPPA = /usr/bin/passwd [A-Za-z]*, !/usr/bin/passwd *root* + +# bob may run anything on the sparc and sgi machines as any user +# listed in the Runas_Alias "OP" (ie: root and operator) +bob SPARC = (OP) ALL : SGI = (OP) ALL + +# jim may run anything on machines in the biglab netgroup +jim +biglab = ALL + +# users in the secretaries netgroup need to help manage the printers +# as well as add and remove users ++secretaries ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser + +# fred can run commands as oracle or sybase without a password +fred ALL = (DB) NOPASSWD: ALL + +# on the alphas, john may su to anyone but root and flags are not allowed +john ALPHA = /usr/bin/su [!-]*, !/usr/bin/su *root* + +# jen can run anything on all machines except the ones +# in the "SERVERS" Host_Alias +jen ALL, !SERVERS = ALL + +# jill can run any commands in the directory /usr/bin/, except for +# those in the SU and SHELLS aliases. +jill SERVERS = /usr/bin/, !SU, !SHELLS + +# steve can run any command in the directory /usr/local/op_commands/ +# as user operator. +steve CSNETS = (operator) /usr/local/op_commands/ + +# matt needs to be able to kill things on his workstation when +# they get hung. +matt valkyrie = KILL + +# users in the WEBMASTERS User_Alias (will, wendy, and wim) +# may run any command as user www (which owns the web pages) +# or simply su to www. +WEBMASTERS www = (www) ALL, (root) /usr/bin/su www + +# anyone can mount/unmount a cd-rom on the machines in the CDROM alias +ALL CDROM = NOPASSWD: /sbin/umount /CDROM,\ + /sbin/mount -o nosuid\,nodev /dev/cd0a /CDROM diff --git a/examples/syslog.conf b/examples/syslog.conf new file mode 100644 index 0000000..686cd19 --- /dev/null +++ b/examples/syslog.conf @@ -0,0 +1,26 @@ +# This is a sample syslog.conf fragment for use with Sudo. +# +# By default, sudo logs to "authpriv" if your system supports it, else it +# uses "auth". The facility can be set via the --with-logfac configure +# option or in the sudoers file. +# To see what syslog facility a sudo binary uses, run `sudo -V' as *root*. +# +# NOTES: +# The whitespace in the following line is made up of <TAB> +# characters, *not* spaces. You cannot just cut and paste! +# +# If you edit syslog.conf you need to send syslogd a HUP signal. +# Ie: kill -HUP process_id +# +# Syslogd will not create new log files for you, you must first +# create the file before syslogd will log to it. Eg. +# 'touch /var/log/sudo' + +# This logs successful and failed sudo attempts to the file /var/log/auth +# If your system has the authpriv syslog facility, use authpriv.debug +auth.debug /var/log/auth + +# To log to a remote machine, use something like the following, +# where "loghost" is the name of the remote machine. +# If your system has the authpriv syslog facility, use authpriv.debug +auth.debug @loghost |