summaryrefslogtreecommitdiffstats
path: root/man/systemd.xml
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--man/systemd.xml1263
1 files changed, 1263 insertions, 0 deletions
diff --git a/man/systemd.xml b/man/systemd.xml
new file mode 100644
index 0000000..5287bda
--- /dev/null
+++ b/man/systemd.xml
@@ -0,0 +1,1263 @@
+<?xml version='1.0'?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<!--
+ SPDX-License-Identifier: LGPL-2.1+
+-->
+
+<refentry id="systemd"
+ xmlns:xi="http://www.w3.org/2001/XInclude">
+
+ <refentryinfo>
+ <title>systemd</title>
+ <productname>systemd</productname>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>systemd</refentrytitle>
+ <manvolnum>1</manvolnum>
+ </refmeta>
+
+ <refnamediv>
+ <refname>systemd</refname>
+ <refname>init</refname>
+ <refpurpose>systemd system and service manager</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <cmdsynopsis>
+ <command>/usr/lib/systemd/systemd</command>
+ <arg choice="opt" rep="repeat">OPTIONS</arg>
+ </cmdsynopsis>
+ <cmdsynopsis>
+ <command>init</command>
+ <arg choice="opt" rep="repeat">OPTIONS</arg>
+ <arg choice="req">COMMAND</arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>systemd is a system and service manager for Linux operating
+ systems. When run as first process on boot (as PID 1), it acts as
+ init system that brings up and maintains userspace
+ services.</para>
+
+ <para>For compatibility with SysV, if systemd is called as
+ <command>init</command> and a PID that is not 1, it will execute
+ <command>telinit</command> and pass all command line arguments
+ unmodified. That means <command>init</command> and
+ <command>telinit</command> are mostly equivalent when invoked from
+ normal login sessions. See
+ <citerefentry><refentrytitle>telinit</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ for more information.</para>
+
+ <para>When run as a system instance, systemd interprets the
+ configuration file <filename>system.conf</filename> and the files
+ in <filename>system.conf.d</filename> directories; when run as a
+ user instance, systemd interprets the configuration file
+ <filename>user.conf</filename> and the files in
+ <filename>user.conf.d</filename> directories. See
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ for more information.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Options</title>
+
+ <para>The following options are understood:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term><option>--test</option></term>
+
+ <listitem><para>Determine startup sequence, dump it and exit.
+ This is an option useful for debugging only.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--dump-configuration-items</option></term>
+
+ <listitem><para>Dump understood unit configuration items. This
+ outputs a terse but complete list of configuration items
+ understood in unit definition files.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--dump-bus-properties</option></term>
+
+ <listitem><para>Dump exposed bus properties. This outputs
+ a terse but complete list of properties exposed to dbus.
+ </para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--unit=</option></term>
+
+ <listitem><para>Set default unit to activate on startup. If
+ not specified, defaults to
+ <filename>default.target</filename>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--system</option></term>
+ <term><option>--user</option></term>
+
+ <listitem><para>For <option>--system</option>, tell systemd to
+ run a system instance, even if the process ID is not 1, i.e.
+ systemd is not run as init process. <option>--user</option>
+ does the opposite, running a user instance even if the process
+ ID is 1. Normally, it should not be necessary to pass these
+ options, as systemd automatically detects the mode it is
+ started in. These options are hence of little use except for
+ debugging. Note that it is not supported booting and
+ maintaining a full system with systemd running in
+ <option>--system</option> mode, but PID not 1. In practice,
+ passing <option>--system</option> explicitly is only useful in
+ conjunction with <option>--test</option>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--dump-core</option></term>
+
+ <listitem><para>Enable core dumping on crash. This switch has
+ no effect when running as user instance. This setting may also
+ be enabled during boot on the kernel command line via the
+ <varname>systemd.dump_core=</varname> option, see
+ below.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--crash-vt=</option><replaceable>VT</replaceable></term>
+
+ <listitem><para>Switch to a specific virtual console (VT) on
+ crash. Takes a positive integer in the range 1–63, or a
+ boolean argument. If an integer is passed, selects which VT to
+ switch to. If <constant>yes</constant>, the VT kernel messages
+ are written to is selected. If <constant>no</constant>, no VT
+ switch is attempted. This switch has no effect when running as
+ user instance. This setting may also be enabled during boot,
+ on the kernel command line via the
+ <varname>systemd.crash_vt=</varname> option, see
+ <!-- FIXME: there is no crash_vt command line option? -->
+ below.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--crash-shell</option></term>
+
+ <listitem><para>Run a shell on crash. This switch has no
+ effect when running as user instance. This setting may also be
+ enabled during boot, on the kernel command line via the
+ <varname>systemd.crash_shell=</varname> option, see
+ below.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--crash-reboot</option></term>
+
+ <listitem><para>Automatically reboot the system on crash. This
+ switch has no effect when running as user instance. This
+ setting may also be enabled during boot, on the kernel command
+ line via the <varname>systemd.crash_reboot=</varname> option,
+ see below.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--confirm-spawn</option></term>
+
+ <listitem><para>Ask for confirmation when spawning processes.
+ This switch has no effect when run as user
+ instance.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--show-status=</option></term>
+
+ <listitem><para>Takes a boolean argument or the special value <constant>auto</constant>. If on, terse unit
+ status information is shown on the console during boot-up and shutdown. If off, no such status information is
+ shown. If set to <constant>auto</constant> behavior is similar to off, except that it is automatically switched
+ to on, as soon as the first unit failure or significant boot delay is encountered. This switch has no effect
+ when invoked as user instance. If specified, overrides both the kernel command line setting
+ <varname>systemd.show_status=</varname> (see below) and the configuration file option
+ <option>ShowStatus=</option>, see
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--log-target=</option></term>
+
+ <listitem><para>Set log target. Argument must be one of
+ <option>console</option>,
+ <option>journal</option>,
+ <option>kmsg</option>,
+ <option>journal-or-kmsg</option>,
+ <option>null</option>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--log-level=</option></term>
+
+ <listitem><para>Set log level. As
+ argument this accepts a numerical log
+ level or the well-known <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+ symbolic names (lowercase):
+ <option>emerg</option>,
+ <option>alert</option>,
+ <option>crit</option>,
+ <option>err</option>,
+ <option>warning</option>,
+ <option>notice</option>,
+ <option>info</option>,
+ <option>debug</option>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--log-color=</option></term>
+
+ <listitem><para>Highlight important log messages. Argument is
+ a boolean value. If the argument is omitted, it defaults to
+ <option>true</option>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--log-location=</option></term>
+
+ <listitem><para>Include code location in log messages. This is
+ mostly relevant for debugging purposes. Argument is a boolean
+ value. If the argument is omitted it defaults to
+ <option>true</option>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>--default-standard-output=</option></term>
+ <term><option>--default-standard-error=</option></term>
+
+ <listitem><para>Sets the default output or error output for
+ all services and sockets, respectively. That is, controls the
+ default for <option>StandardOutput=</option> and
+ <option>StandardError=</option> (see
+ <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ for details). Takes one of
+ <option>inherit</option>,
+ <option>null</option>,
+ <option>tty</option>,
+ <option>journal</option>,
+ <option>journal+console</option>,
+ <option>syslog</option>,
+ <option>syslog+console</option>,
+ <option>kmsg</option>,
+ <option>kmsg+console</option>. If the
+ argument is omitted
+ <option>--default-standard-output=</option> defaults to
+ <option>journal</option> and
+ <option>--default-standard-error=</option> to
+ <option>inherit</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--machine-id=</option></term>
+
+ <listitem><para>Override the machine-id set on the hard drive,
+ useful for network booting or for containers. May not be set
+ to all zeros.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--service-watchdogs=</option></term>
+
+ <listitem><para>Globally enable/disable all service watchdog timeouts and emergency
+ actions. This setting may also be specified during boot, on the kernel
+ command line via the <varname>systemd.service_watchdogs=</varname>
+ option, see below. Defaults to enabled.</para></listitem>
+ </varlistentry>
+
+ <xi:include href="standard-options.xml" xpointer="help" />
+ <xi:include href="standard-options.xml" xpointer="version" />
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Concepts</title>
+
+ <para>systemd provides a dependency system between various
+ entities called "units" of 11 different types. Units encapsulate
+ various objects that are relevant for system boot-up and
+ maintenance. The majority of units are configured in unit
+ configuration files, whose syntax and basic set of options is
+ described in
+ <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ however some are created automatically from other configuration,
+ dynamically from system state or programmatically at runtime.
+ Units may be "active" (meaning started, bound, plugged in, …,
+ depending on the unit type, see below), or "inactive" (meaning
+ stopped, unbound, unplugged, …), as well as in the process of
+ being activated or deactivated, i.e. between the two states (these
+ states are called "activating", "deactivating"). A special
+ "failed" state is available as well, which is very similar to
+ "inactive" and is entered when the service failed in some way
+ (process returned error code on exit, or crashed, an operation
+ timed out, or after too many restarts). If this state is entered,
+ the cause will be logged, for later reference. Note that the
+ various unit types may have a number of additional substates,
+ which are mapped to the five generalized unit states described
+ here.</para>
+
+ <para>The following unit types are available:</para>
+
+ <orderedlist>
+ <listitem><para>Service units, which start and control daemons
+ and the processes they consist of. For details, see
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Socket units, which encapsulate local IPC or
+ network sockets in the system, useful for socket-based
+ activation. For details about socket units, see
+ <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ for details on socket-based activation and other forms of
+ activation, see
+ <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Target units are useful to group units, or
+ provide well-known synchronization points during boot-up, see
+ <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Device units expose kernel devices in systemd
+ and may be used to implement device-based activation. For
+ details, see
+ <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Mount units control mount points in the file
+ system, for details see
+ <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Automount units provide automount capabilities,
+ for on-demand mounting of file systems as well as parallelized
+ boot-up. See
+ <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Timer units are useful for triggering activation
+ of other units based on timers. You may find details in
+ <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Swap units are very similar to mount units and
+ encapsulate memory swap partitions or files of the operating
+ system. They are described in
+ <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Path units may be used to activate other
+ services when file system objects change or are modified. See
+ <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Slice units may be used to group units which
+ manage system processes (such as service and scope units) in a
+ hierarchical tree for resource management purposes. See
+ <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ <listitem><para>Scope units are similar to service units, but
+ manage foreign processes instead of starting them as well. See
+ <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+ </orderedlist>
+
+ <para>Units are named as their configuration files. Some units
+ have special semantics. A detailed list is available in
+ <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
+
+ <para>systemd knows various kinds of dependencies, including
+ positive and negative requirement dependencies (i.e.
+ <varname>Requires=</varname> and <varname>Conflicts=</varname>) as
+ well as ordering dependencies (<varname>After=</varname> and
+ <varname>Before=</varname>). NB: ordering and requirement
+ dependencies are orthogonal. If only a requirement dependency
+ exists between two units (e.g. <filename>foo.service</filename>
+ requires <filename>bar.service</filename>), but no ordering
+ dependency (e.g. <filename>foo.service</filename> after
+ <filename>bar.service</filename>) and both are requested to start,
+ they will be started in parallel. It is a common pattern that both
+ requirement and ordering dependencies are placed between two
+ units. Also note that the majority of dependencies are implicitly
+ created and maintained by systemd. In most cases, it should be
+ unnecessary to declare additional dependencies manually, however
+ it is possible to do this.</para>
+
+ <para>Application programs and units (via dependencies) may
+ request state changes of units. In systemd, these requests are
+ encapsulated as 'jobs' and maintained in a job queue. Jobs may
+ succeed or can fail, their execution is ordered based on the
+ ordering dependencies of the units they have been scheduled
+ for.</para>
+
+ <para>On boot systemd activates the target unit
+ <filename>default.target</filename> whose job is to activate
+ on-boot services and other on-boot units by pulling them in via
+ dependencies. Usually, the unit name is just an alias (symlink) for
+ either <filename>graphical.target</filename> (for fully-featured
+ boots into the UI) or <filename>multi-user.target</filename> (for
+ limited console-only boots for use in embedded or server
+ environments, or similar; a subset of graphical.target). However,
+ it is at the discretion of the administrator to configure it as an
+ alias to any other target unit. See
+ <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for details about these target units.</para>
+
+ <para>systemd only keeps a minimal set of units loaded into memory. Specifically, the only units that are kept
+ loaded into memory are those for which at least one of the following conditions is true:</para>
+
+ <orderedlist>
+ <listitem><para>It is in an active, activating, deactivating or failed state (i.e. in any unit state except for <literal>inactive</literal>)</para></listitem>
+ <listitem><para>It has a job queued for it</para></listitem>
+ <listitem><para>It is a dependency of some sort of at least one other unit that is loaded into memory</para></listitem>
+ <listitem><para>It has some form of resource still allocated (e.g. a service unit that is inactive but for which
+ a process is still lingering that ignored the request to be terminated)</para></listitem>
+ <listitem><para>It has been pinned into memory programmatically by a D-Bus call</para></listitem>
+ </orderedlist>
+
+ <para>systemd will automatically and implicitly load units from disk — if they are not loaded yet — as soon as
+ operations are requested for them. Thus, in many respects, the fact whether a unit is loaded or not is invisible to
+ clients. Use <command>systemctl list-units --all</command> to comprehensively list all units currently loaded. Any
+ unit for which none of the conditions above applies is promptly unloaded. Note that when a unit is unloaded from
+ memory its accounting data is flushed out too. However, this data is generally not lost, as a journal log record
+ is generated declaring the consumed resources whenever a unit shuts down.</para>
+
+ <para>Processes systemd spawns are placed in individual Linux
+ control groups named after the unit which they belong to in the
+ private systemd hierarchy. (see <ulink
+ url="https://www.kernel.org/doc/Documentation/cgroup-v1/cgroups.txt">cgroups.txt</ulink>
+ for more information about control groups, or short "cgroups").
+ systemd uses this to effectively keep track of processes. Control
+ group information is maintained in the kernel, and is accessible
+ via the file system hierarchy (beneath
+ <filename>/sys/fs/cgroup/systemd/</filename>), or in tools such as
+ <citerefentry project='man-pages'><refentrytitle>systemd-cgls</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ or
+ <citerefentry project='man-pages'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ (<command>ps xawf -eo pid,user,cgroup,args</command> is
+ particularly useful to list all processes and the systemd units
+ they belong to.).</para>
+
+ <para>systemd is compatible with the SysV init system to a large
+ degree: SysV init scripts are supported and simply read as an
+ alternative (though limited) configuration file format. The SysV
+ <filename>/dev/initctl</filename> interface is provided, and
+ compatibility implementations of the various SysV client tools are
+ available. In addition to that, various established Unix
+ functionality such as <filename>/etc/fstab</filename> or the
+ <filename>utmp</filename> database are supported.</para>
+
+ <para>systemd has a minimal transaction system: if a unit is
+ requested to start up or shut down it will add it and all its
+ dependencies to a temporary transaction. Then, it will verify if
+ the transaction is consistent (i.e. whether the ordering of all
+ units is cycle-free). If it is not, systemd will try to fix it up,
+ and removes non-essential jobs from the transaction that might
+ remove the loop. Also, systemd tries to suppress non-essential
+ jobs in the transaction that would stop a running service. Finally
+ it is checked whether the jobs of the transaction contradict jobs
+ that have already been queued, and optionally the transaction is
+ aborted then. If all worked out and the transaction is consistent
+ and minimized in its impact it is merged with all already
+ outstanding jobs and added to the run queue. Effectively this
+ means that before executing a requested operation, systemd will
+ verify that it makes sense, fixing it if possible, and only
+ failing if it really cannot work.</para>
+
+ <para>Note that transactions are generated independently of a unit's
+ state at runtime, hence, for example, if a start job is requested on an
+ already started unit, it will still generate a transaction and wake up any
+ inactive dependencies (and cause propagation of other jobs as per the
+ defined relationships). This is because the enqueued job is at the time of
+ execution compared to the target unit's state and is marked successful and
+ complete when both satisfy. However, this job also pulls in other
+ dependencies due to the defined relationships and thus leads to, in our
+ our example, start jobs for any of those inactive units getting queued as
+ well.</para>
+
+ <para>systemd contains native implementations of various tasks
+ that need to be executed as part of the boot process. For example,
+ it sets the hostname or configures the loopback network device. It
+ also sets up and mounts various API file systems, such as
+ <filename>/sys</filename> or <filename>/proc</filename>.</para>
+
+ <para>For more information about the concepts and
+ ideas behind systemd, please refer to the
+ <ulink url="http://0pointer.de/blog/projects/systemd.html">Original Design Document</ulink>.</para>
+
+ <para>Note that some but not all interfaces provided
+ by systemd are covered by the
+ <ulink url="https://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise">Interface
+ Stability Promise</ulink>.</para>
+
+ <para>Units may be generated dynamically at boot and system
+ manager reload time, for example based on other configuration
+ files or parameters passed on the kernel command line. For details, see
+ <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
+
+ <para>Systems which invoke systemd in a container or initrd
+ environment should implement the
+ <ulink url="https://www.freedesktop.org/wiki/Software/systemd/ContainerInterface">Container Interface</ulink> or
+ <ulink url="https://www.freedesktop.org/wiki/Software/systemd/InitrdInterface">initrd Interface</ulink>
+ specifications, respectively.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Directories</title>
+
+ <variablelist>
+ <varlistentry>
+ <term>System unit directories</term>
+
+ <listitem><para>The systemd system manager reads unit
+ configuration from various directories. Packages that want to
+ install unit files shall place them in the directory returned
+ by <command>pkg-config systemd
+ --variable=systemdsystemunitdir</command>. Other directories
+ checked are <filename>/usr/local/lib/systemd/system</filename>
+ and <filename>/usr/lib/systemd/system</filename>. User
+ configuration always takes precedence. <command>pkg-config
+ systemd --variable=systemdsystemconfdir</command> returns the
+ path of the system configuration directory. Packages should
+ alter the content of these directories only with the
+ <command>enable</command> and <command>disable</command>
+ commands of the
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ tool. Full list of directories is provided in
+ <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+ </para></listitem>
+ </varlistentry>
+ </variablelist>
+
+ <variablelist>
+ <varlistentry>
+ <term>User unit directories</term>
+
+ <listitem><para>Similar rules apply for the user unit
+ directories. However, here the
+ <ulink url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG
+ Base Directory specification</ulink> is followed to find
+ units. Applications should place their unit files in the
+ directory returned by <command>pkg-config systemd
+ --variable=systemduserunitdir</command>. Global configuration
+ is done in the directory reported by <command>pkg-config
+ systemd --variable=systemduserconfdir</command>. The
+ <command>enable</command> and <command>disable</command>
+ commands of the
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ tool can handle both global (i.e. for all users) and private
+ (for one user) enabling/disabling of units. Full list of
+ directories is provided in
+ <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+ </para></listitem>
+ </varlistentry>
+ </variablelist>
+
+ <variablelist>
+ <varlistentry>
+ <term>SysV init scripts directory</term>
+
+ <listitem><para>The location of the SysV init script directory
+ varies between distributions. If systemd cannot find a native
+ unit file for a requested service, it will look for a SysV
+ init script of the same name (with the
+ <filename>.service</filename> suffix
+ removed).</para></listitem>
+ </varlistentry>
+ </variablelist>
+
+ <variablelist>
+ <varlistentry>
+ <term>SysV runlevel link farm directory</term>
+
+ <listitem><para>The location of the SysV runlevel link farm
+ directory varies between distributions. systemd will take the
+ link farm into account when figuring out whether a service
+ shall be enabled. Note that a service unit with a native unit
+ configuration file cannot be started by activating it in the
+ SysV runlevel link farm.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Signals</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><constant>SIGTERM</constant></term>
+
+ <listitem><para>Upon receiving this signal the systemd system
+ manager serializes its state, reexecutes itself and
+ deserializes the saved state again. This is mostly equivalent
+ to <command>systemctl daemon-reexec</command>.</para>
+
+ <para>systemd user managers will start the
+ <filename>exit.target</filename> unit when this signal is
+ received. This is mostly equivalent to <command>systemctl
+ --user start exit.target
+ --job-mode=replace-irreversible</command>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGINT</constant></term>
+
+ <listitem><para>Upon receiving this signal the systemd system manager will start the
+ <filename>ctrl-alt-del.target</filename> unit. This is mostly equivalent to
+ <command>systemctl start ctrl-alt-del.target --job-mode=replace-irreversible</command>. If
+ this signal is received more than 7 times per 2s, an immediate reboot is triggered. Note
+ that pressing
+ <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>Del</keycap></keycombo> on the
+ console will trigger this signal. Hence, if a reboot is hanging, pressing
+ <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>Del</keycap></keycombo> more than
+ 7 times in 2 seconds is a relatively safe way to trigger an immediate reboot.</para>
+
+ <para>systemd user managers treat this signal the same way as
+ <constant>SIGTERM</constant>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGWINCH</constant></term>
+
+ <listitem><para>When this signal is received the systemd
+ system manager will start the
+ <filename>kbrequest.target</filename> unit. This is mostly
+ equivalent to <command>systemctl start
+ kbrequest.target</command>.</para>
+
+ <para>This signal is ignored by systemd user
+ managers.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGPWR</constant></term>
+
+ <listitem><para>When this signal is received the systemd
+ manager will start the <filename>sigpwr.target</filename>
+ unit. This is mostly equivalent to <command>systemctl start
+ sigpwr.target</command>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGUSR1</constant></term>
+
+ <listitem><para>When this signal is received the systemd
+ manager will try to reconnect to the D-Bus
+ bus.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGUSR2</constant></term>
+
+ <listitem><para>When this signal is received the systemd
+ manager will log its complete state in human-readable form.
+ The data logged is the same as printed by
+ <command>systemd-analyze dump</command>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGHUP</constant></term>
+
+ <listitem><para>Reloads the complete daemon configuration.
+ This is mostly equivalent to <command>systemctl
+ daemon-reload</command>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+0</constant></term>
+
+ <listitem><para>Enters default mode, starts the
+ <filename>default.target</filename> unit. This is mostly
+ equivalent to <command>systemctl isolate
+ default.target</command>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+1</constant></term>
+
+ <listitem><para>Enters rescue mode, starts the
+ <filename>rescue.target</filename> unit. This is mostly
+ equivalent to <command>systemctl isolate
+ rescue.target</command>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+2</constant></term>
+
+ <listitem><para>Enters emergency mode, starts the
+ <filename>emergency.service</filename> unit. This is mostly
+ equivalent to <command>systemctl isolate
+ emergency.service</command>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+3</constant></term>
+
+ <listitem><para>Halts the machine, starts the
+ <filename>halt.target</filename> unit. This is mostly
+ equivalent to <command>systemctl start halt.target
+ --job-mode=replace-irreversible</command>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+4</constant></term>
+
+ <listitem><para>Powers off the machine, starts the
+ <filename>poweroff.target</filename> unit. This is mostly
+ equivalent to <command>systemctl start poweroff.target
+ --job-mode=replace-irreversible</command>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+5</constant></term>
+
+ <listitem><para>Reboots the machine, starts the
+ <filename>reboot.target</filename> unit. This is mostly
+ equivalent to <command>systemctl start reboot.target
+ --job-mode=replace-irreversible</command>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+6</constant></term>
+
+ <listitem><para>Reboots the machine via kexec, starts the
+ <filename>kexec.target</filename> unit. This is mostly
+ equivalent to <command>systemctl start kexec.target
+ --job-mode=replace-irreversible</command>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+13</constant></term>
+
+ <listitem><para>Immediately halts the machine.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+14</constant></term>
+
+ <listitem><para>Immediately powers off the machine.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+15</constant></term>
+
+ <listitem><para>Immediately reboots the machine.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+16</constant></term>
+
+ <listitem><para>Immediately reboots the machine with kexec.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+20</constant></term>
+
+ <listitem><para>Enables display of status messages on the
+ console, as controlled via
+ <varname>systemd.show_status=1</varname> on the kernel command
+ line.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+21</constant></term>
+
+ <listitem><para>Disables display of
+ status messages on the console, as
+ controlled via
+ <varname>systemd.show_status=0</varname>
+ on the kernel command
+ line.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+22</constant></term>
+
+ <listitem><para>Sets the service manager's log level to <literal>debug</literal>, in a fashion equivalent to
+ <varname>systemd.log_level=debug</varname> on the kernel command line.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+23</constant></term>
+
+ <listitem><para>Restores the log level to its configured value. The configured value is derived from – in order
+ of priority – the value specified with <varname>systemd.log-level=</varname> on the kernel command line, or the
+ value specified with <option>LogLevel=</option> in the configuration file, or the built-in default of
+ <literal>info</literal>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+24</constant></term>
+
+ <listitem><para>Immediately exits the manager (only available
+ for --user instances).</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+26</constant></term>
+
+ <listitem><para>Restores the log target to its configured value. The configured value is derived from – in
+ order of priority – the value specified with <varname>systemd.log-target=</varname> on the kernel command line,
+ or the value specified with <option>LogTarget=</option> in the configuration file, or the built-in
+ default.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><constant>SIGRTMIN+27</constant></term>
+ <term><constant>SIGRTMIN+28</constant></term>
+
+ <listitem><para>Sets the log target to <literal>console</literal> on <constant>SIGRTMIN+27</constant> (or
+ <literal>kmsg</literal> on <constant>SIGRTMIN+28</constant>), in a fashion equivalent to
+ <varname>systemd.log_target=console</varname> (or <varname>systemd.log_target=kmsg</varname> on
+ <constant>SIGRTMIN+28</constant>) on the kernel command line.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Environment</title>
+
+ <variablelist class='environment-variables'>
+ <varlistentry>
+ <term><varname>$SYSTEMD_LOG_LEVEL</varname></term>
+ <listitem><para>systemd reads the log level from this
+ environment variable. This can be overridden with
+ <option>--log-level=</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$SYSTEMD_LOG_TARGET</varname></term>
+ <listitem><para>systemd reads the log target from this
+ environment variable. This can be overridden with
+ <option>--log-target=</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$SYSTEMD_LOG_COLOR</varname></term>
+ <listitem><para>Controls whether systemd highlights important
+ log messages. This can be overridden with
+ <option>--log-color=</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$SYSTEMD_LOG_LOCATION</varname></term>
+ <listitem><para>Controls whether systemd prints the code
+ location along with log messages. This can be overridden with
+ <option>--log-location=</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$XDG_CONFIG_HOME</varname></term>
+ <term><varname>$XDG_CONFIG_DIRS</varname></term>
+ <term><varname>$XDG_DATA_HOME</varname></term>
+ <term><varname>$XDG_DATA_DIRS</varname></term>
+
+ <listitem><para>The systemd user manager uses these variables
+ in accordance to the <ulink
+ url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG
+ Base Directory specification</ulink> to find its
+ configuration.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$SYSTEMD_UNIT_PATH</varname></term>
+
+ <listitem><para>Controls where systemd looks for unit
+ files.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$SYSTEMD_SYSVINIT_PATH</varname></term>
+
+ <listitem><para>Controls where systemd looks for SysV init
+ scripts.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$SYSTEMD_SYSVRCND_PATH</varname></term>
+
+ <listitem><para>Controls where systemd looks for SysV init
+ script runlevel link farms.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$SYSTEMD_COLORS</varname></term>
+
+ <listitem><para>The value must be a boolean. Controls whether colorized output should be
+ generated. This can be specified to override the decision that <command>systemd</command>
+ makes based on <varname>$TERM</varname> and what the console is connected to.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$SYSTEMD_URLIFY</varname></term>
+
+ <listitem><para>The value must be a boolean. Controls whether clickable links should be generated in the output
+ for terminal emulators supporting this. This can be specified to override the decision that
+ <command>systemd</command> makes based on <varname>$TERM</varname> and other conditions.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$LISTEN_PID</varname></term>
+ <term><varname>$LISTEN_FDS</varname></term>
+ <term><varname>$LISTEN_FDNAMES</varname></term>
+
+ <listitem><para>Set by systemd for supervised processes during
+ socket-based activation. See
+ <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+ for more information.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>$NOTIFY_SOCKET</varname></term>
+
+ <listitem><para>Set by systemd for supervised processes for
+ status and start-up completion notification. See
+ <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+ for more information.</para></listitem>
+ </varlistentry>
+ </variablelist>
+
+ <para>For further environment variables understood by systemd and its various components, see <ulink
+ url="https://systemd.io/ENVIRONMENT">Known Environment Variables</ulink>.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Kernel Command Line</title>
+
+ <para>When run as system instance systemd parses a number of
+ kernel command line arguments<footnote><para>If run inside a Linux
+ container these arguments may be passed as command line arguments
+ to systemd itself, next to any of the command line options listed
+ in the Options section above. If run outside of Linux containers,
+ these arguments are parsed from <filename>/proc/cmdline</filename>
+ instead.</para></footnote>:</para>
+
+ <variablelist class='kernel-commandline-options'>
+ <varlistentry>
+ <term><varname>systemd.unit=</varname></term>
+ <term><varname>rd.systemd.unit=</varname></term>
+
+ <listitem><para>Overrides the unit to activate on boot.
+ Defaults to <filename>default.target</filename>. This may be
+ used to temporarily boot into a different boot unit, for
+ example <filename>rescue.target</filename> or
+ <filename>emergency.service</filename>. See
+ <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for details about these units. The option prefixed with
+ <literal>rd.</literal> is honored only in the initial RAM disk
+ (initrd), while the one that is not prefixed only in the main
+ system.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.dump_core</varname></term>
+
+ <listitem><para>Takes a boolean argument or enables the option if specified
+ without an argument. If enabled, the systemd manager (PID 1) dumps core when
+ it crashes. Otherwise, no core dump is created. Defaults to enabled.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.crash_chvt</varname></term>
+
+ <listitem><para>Takes a positive integer, or a boolean argument. Can be also
+ specified without an argument, with the same effect as a positive boolean. If
+ a positive integer (in the range 1–63) is specified, the system manager (PID
+ 1) will activate the specified virtual terminal (VT) when it
+ crashes. Defaults to disabled, meaning that no such switch is attempted. If
+ set to enabled, the VT the kernel messages are written to is selected.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.crash_shell</varname></term>
+
+ <listitem><para>Takes a boolean argument or enables the option if specified
+ without an argument. If enabled, the system manager (PID 1) spawns a shell
+ when it crashes, after a 10s delay. Otherwise, no shell is spawned. Defaults
+ to disabled, for security reasons, as the shell is not protected by password
+ authentication.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.crash_reboot</varname></term>
+
+ <listitem><para>Takes a boolean argument or enables the option if specified
+ without an argument. If enabled, the system manager (PID 1) will reboot the
+ machine automatically when it crashes, after a 10s delay. Otherwise, the
+ system will hang indefinitely. Defaults to disabled, in order to avoid a
+ reboot loop. If combined with <varname>systemd.crash_shell</varname>, the
+ system is rebooted after the shell exits.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.confirm_spawn</varname></term>
+
+ <listitem><para>Takes a boolean argument or a path to the virtual console
+ where the confirmation messages should be emitted. Can be also specified
+ without an argument, with the same effect as a positive boolean. If enabled,
+ the system manager (PID 1) asks for confirmation when spawning processes
+ using <option>/dev/console</option>. If a path or a console name (such as
+ <literal>ttyS0</literal>) is provided, the virtual console pointed to by this
+ path or described by the give name will be used instead. Defaults to disabled.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.service_watchdogs=</varname></term>
+
+ <listitem><para>Takes a boolean argument. If disabled, all service runtime
+ watchdogs (<option>WatchdogSec=</option>) and emergency actions (e.g.
+ <option>OnFailure=</option> or <option>StartLimitAction=</option>) are
+ ignored by the system manager (PID 1); see
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+ Defaults to enabled, i.e. watchdogs and failure actions are processed
+ normally. The hardware watchdog is not affected by this
+ option.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.show_status</varname></term>
+
+ <listitem><para>Takes a boolean argument or the constant
+ <constant>auto</constant>. Can be also specified without an argument, with
+ the same effect as a positive boolean. If enabled, the systemd manager (PID
+ 1) shows terse service status updates on the console during bootup.
+ <constant>auto</constant> behaves like <option>false</option> until a unit
+ fails or there is a significant delay in boot. Defaults to enabled, unless
+ <option>quiet</option> is passed as kernel command line option, in which case
+ it defaults to <constant>auto</constant>. If specified overrides the system
+ manager configuration file option <option>ShowStatus=</option>, see
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+ However, the process command line option <option>--show-status=</option>
+ takes precedence over both this kernel command line option and the
+ configuration file option.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.log_target=</varname></term>
+ <term><varname>systemd.log_level=</varname></term>
+ <term><varname>systemd.log_location=</varname></term>
+ <term><varname>systemd.log_color</varname></term>
+
+ <listitem><para>Controls log output, with the same effect as the
+ <varname>$SYSTEMD_LOG_TARGET</varname>,
+ <varname>$SYSTEMD_LOG_LEVEL</varname>,
+ <varname>$SYSTEMD_LOG_LOCATION</varname>,
+ <varname>$SYSTEMD_LOG_COLOR</varname> environment variables described above.
+ <varname>systemd.log_color</varname> can be specified without an argument,
+ with the same effect as a positive boolean.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.default_standard_output=</varname></term>
+ <term><varname>systemd.default_standard_error=</varname></term>
+ <listitem><para>Controls default standard output and error
+ output for services, with the same effect as the
+ <option>--default-standard-output=</option> and
+ <option>--default-standard-error=</option> command line
+ arguments described above, respectively.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.setenv=</varname></term>
+
+ <listitem><para>Takes a string argument in the form
+ VARIABLE=VALUE. May be used to set default environment
+ variables to add to forked child processes. May be used more
+ than once to set multiple variables.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.machine_id=</varname></term>
+
+ <listitem><para>Takes a 32 character hex value to be
+ used for setting the machine-id. Intended mostly for
+ network booting where the same machine-id is desired
+ for every boot.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.unified_cgroup_hierarchy</varname></term>
+
+ <listitem><para>When specified without an argument or with a true argument,
+ enables the usage of
+ <ulink url="https://www.kernel.org/doc/Documentation/cgroup-v2.txt">unified cgroup hierarchy</ulink>
+ (a.k.a. cgroups-v2). When specified with a false argument, fall back to
+ hybrid or full legacy cgroup hierarchy.</para>
+
+ <para>If this option is not specified, the default behaviour is determined
+ during compilation (the <option>-Ddefault-hierarchy=</option> meson
+ option). If the kernel does not support unified cgroup hierarchy, the legacy
+ hierarchy will be used even if this option is specified.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>systemd.legacy_systemd_cgroup_controller</varname></term>
+
+ <listitem><para>Takes effect if the full unified cgroup hierarchy is not used
+ (see previous option). When specified without an argument or with a true
+ argument, disables the use of "hybrid" cgroup hierarchy (i.e. a cgroups-v2
+ tree used for systemd, and
+ <ulink url="https://www.kernel.org/doc/Documentation/cgroup-v1/">legacy
+ cgroup hierarchy</ulink>, a.k.a. cgroups-v1, for other controllers), and
+ forces a full "legacy" mode. When specified with a false argument, enables
+ the use of "hybrid" hierarchy.</para>
+
+ <para>If this option is not specified, the default behaviour is determined
+ during compilation (the <option>-Ddefault-hierarchy=</option> meson
+ option). If the kernel does not support unified cgroup hierarchy, the legacy
+ hierarchy will be used even if this option is specified.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>quiet</varname></term>
+
+ <listitem><para>Turn off status output at boot, much like
+ <varname>systemd.show_status=no</varname> would. Note that
+ this option is also read by the kernel itself and disables
+ kernel log output. Passing this option hence turns off the
+ usual output from both the system manager and the kernel.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>debug</varname></term>
+
+ <listitem><para>Turn on debugging output. This is equivalent
+ to <varname>systemd.log_level=debug</varname>. Note that this
+ option is also read by the kernel itself and enables kernel
+ debug output. Passing this option hence turns on the debug
+ output from both the system manager and the
+ kernel.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>emergency</varname></term>
+ <term><varname>rd.emergency</varname></term>
+ <term><varname>-b</varname></term>
+
+ <listitem><para>Boot into emergency mode. This is equivalent
+ to <varname>systemd.unit=emergency.target</varname> or
+ <varname>rd.systemd.unit=emergency.target</varname>, respectively, and
+ provided for compatibility reasons and to be easier to type.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>rescue</varname></term>
+ <term><varname>rd.rescue</varname></term>
+ <term><varname>single</varname></term>
+ <term><varname>s</varname></term>
+ <term><varname>S</varname></term>
+ <term><varname>1</varname></term>
+
+ <listitem><para>Boot into rescue mode. This is equivalent to
+ <varname>systemd.unit=rescue.target</varname> or
+ <varname>rd.systemd.unit=rescue.target</varname>, respectively, and
+ provided for compatibility reasons and to be easier to type.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>2</varname></term>
+ <term><varname>3</varname></term>
+ <term><varname>4</varname></term>
+ <term><varname>5</varname></term>
+
+ <listitem><para>Boot into the specified legacy SysV runlevel.
+ These are equivalent to
+ <varname>systemd.unit=runlevel2.target</varname>,
+ <varname>systemd.unit=runlevel3.target</varname>,
+ <varname>systemd.unit=runlevel4.target</varname>, and
+ <varname>systemd.unit=runlevel5.target</varname>,
+ respectively, and provided for compatibility reasons and to be
+ easier to type.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>locale.LANG=</varname></term>
+ <term><varname>locale.LANGUAGE=</varname></term>
+ <term><varname>locale.LC_CTYPE=</varname></term>
+ <term><varname>locale.LC_NUMERIC=</varname></term>
+ <term><varname>locale.LC_TIME=</varname></term>
+ <term><varname>locale.LC_COLLATE=</varname></term>
+ <term><varname>locale.LC_MONETARY=</varname></term>
+ <term><varname>locale.LC_MESSAGES=</varname></term>
+ <term><varname>locale.LC_PAPER=</varname></term>
+ <term><varname>locale.LC_NAME=</varname></term>
+ <term><varname>locale.LC_ADDRESS=</varname></term>
+ <term><varname>locale.LC_TELEPHONE=</varname></term>
+ <term><varname>locale.LC_MEASUREMENT=</varname></term>
+ <term><varname>locale.LC_IDENTIFICATION=</varname></term>
+
+ <listitem><para>Set the system locale to use. This overrides
+ the settings in <filename>/etc/locale.conf</filename>. For
+ more information, see
+ <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ and
+ <citerefentry project='man-pages'><refentrytitle>locale</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
+ </para></listitem>
+ </varlistentry>
+ </variablelist>
+
+ <para>For other kernel command line parameters understood by
+ components of the core OS, please refer to
+ <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Sockets and FIFOs</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><filename>/run/systemd/notify</filename></term>
+
+ <listitem><para>Daemon status notification socket. This is an
+ <constant>AF_UNIX</constant> datagram socket and is used to
+ implement the daemon notification logic as implemented by
+ <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem>
+
+ </varlistentry>
+
+ <varlistentry>
+ <term><filename>/run/systemd/private</filename></term>
+
+ <listitem><para>Used internally as communication channel
+ between
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ and the systemd process. This is an
+ <constant>AF_UNIX</constant> stream socket. This interface is
+ private to systemd and should not be used in external
+ projects.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><filename>/dev/initctl</filename></term>
+
+ <listitem><para>Limited compatibility support for the SysV
+ client interface, as implemented by the
+ <filename>systemd-initctl.service</filename> unit. This is a
+ named pipe in the file system. This interface is obsolete and
+ should not be used in new applications.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ The <ulink url="https://www.freedesktop.org/wiki/Software/systemd/">systemd Homepage</ulink>,
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-notify</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry project='man-pages'><refentrytitle>bootup</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ </para>
+ </refsect1>
+
+</refentry>