diff options
Diffstat (limited to 'sys-utils/fallocate.c')
-rw-r--r-- | sys-utils/fallocate.c | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/sys-utils/fallocate.c b/sys-utils/fallocate.c new file mode 100644 index 0000000..ba3867c --- /dev/null +++ b/sys-utils/fallocate.c @@ -0,0 +1,412 @@ +/* + * fallocate - utility to use the fallocate system call + * + * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved. + * Written by Eric Sandeen <sandeen@redhat.com> + * Karel Zak <kzak@redhat.com> + * + * cvtnum routine taken from xfsprogs, + * Copyright (c) 2003-2005 Silicon Graphics, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#include <sys/stat.h> +#include <sys/types.h> +#include <sys/mman.h> +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <getopt.h> +#include <limits.h> +#include <string.h> + +#ifndef HAVE_FALLOCATE +# include <sys/syscall.h> +#endif + +#if defined(HAVE_LINUX_FALLOC_H) && \ + (!defined(FALLOC_FL_KEEP_SIZE) || !defined(FALLOC_FL_PUNCH_HOLE) || \ + !defined(FALLOC_FL_COLLAPSE_RANGE) || !defined(FALLOC_FL_ZERO_RANGE) || \ + !defined(FALLOC_FL_INSERT_RANGE)) +# include <linux/falloc.h> /* non-libc fallback for FALLOC_FL_* flags */ +#endif + + +#ifndef FALLOC_FL_KEEP_SIZE +# define FALLOC_FL_KEEP_SIZE 0x1 +#endif + +#ifndef FALLOC_FL_PUNCH_HOLE +# define FALLOC_FL_PUNCH_HOLE 0x2 +#endif + +#ifndef FALLOC_FL_COLLAPSE_RANGE +# define FALLOC_FL_COLLAPSE_RANGE 0x8 +#endif + +#ifndef FALLOC_FL_ZERO_RANGE +# define FALLOC_FL_ZERO_RANGE 0x10 +#endif + +#ifndef FALLOC_FL_INSERT_RANGE +# define FALLOC_FL_INSERT_RANGE 0x20 +#endif + +#include "nls.h" +#include "strutils.h" +#include "c.h" +#include "closestream.h" +#include "xalloc.h" +#include "optutils.h" + +static int verbose; +static char *filename; + +static void __attribute__((__noreturn__)) usage(void) +{ + FILE *out = stdout; + fputs(USAGE_HEADER, out); + fprintf(out, + _(" %s [options] <filename>\n"), program_invocation_short_name); + + fputs(USAGE_SEPARATOR, out); + fputs(_("Preallocate space to, or deallocate space from a file.\n"), out); + + fputs(USAGE_OPTIONS, out); + fputs(_(" -c, --collapse-range remove a range from the file\n"), out); + fputs(_(" -d, --dig-holes detect zeroes and replace with holes\n"), out); + fputs(_(" -i, --insert-range insert a hole at range, shifting existing data\n"), out); + fputs(_(" -l, --length <num> length for range operations, in bytes\n"), out); + fputs(_(" -n, --keep-size maintain the apparent size of the file\n"), out); + fputs(_(" -o, --offset <num> offset for range operations, in bytes\n"), out); + fputs(_(" -p, --punch-hole replace a range with a hole (implies -n)\n"), out); + fputs(_(" -z, --zero-range zero and ensure allocation of a range\n"), out); +#ifdef HAVE_POSIX_FALLOCATE + fputs(_(" -x, --posix use posix_fallocate(3) instead of fallocate(2)\n"), out); +#endif + fputs(_(" -v, --verbose verbose mode\n"), out); + + fputs(USAGE_SEPARATOR, out); + printf(USAGE_HELP_OPTIONS(22)); + + printf(USAGE_MAN_TAIL("fallocate(1)")); + + exit(EXIT_SUCCESS); +} + +static loff_t cvtnum(char *s) +{ + uintmax_t x; + + if (strtosize(s, &x)) + return -1LL; + + return x; +} + +static void xfallocate(int fd, int mode, off_t offset, off_t length) +{ + int error; + +#ifdef HAVE_FALLOCATE + error = fallocate(fd, mode, offset, length); +#else + error = syscall(SYS_fallocate, fd, mode, offset, length); +#endif + /* + * EOPNOTSUPP: The FALLOC_FL_KEEP_SIZE is unsupported + * ENOSYS: The filesystem does not support sys_fallocate + */ + if (error < 0) { + if ((mode & FALLOC_FL_KEEP_SIZE) && errno == EOPNOTSUPP) + errx(EXIT_FAILURE, _("fallocate failed: keep size mode is unsupported")); + err(EXIT_FAILURE, _("fallocate failed")); + } +} + +#ifdef HAVE_POSIX_FALLOCATE +static void xposix_fallocate(int fd, off_t offset, off_t length) +{ + int error = posix_fallocate(fd, offset, length); + if (error < 0) { + err(EXIT_FAILURE, _("fallocate failed")); + } +} +#endif + +/* The real buffer size has to be bufsize + sizeof(uintptr_t) */ +static int is_nul(void *buf, size_t bufsize) +{ + typedef uintptr_t word; + void const *vp; + char const *cbuf = buf, *cp; + word const *wp = buf; + + /* set sentinel */ + memset((char *) buf + bufsize, '\1', sizeof(word)); + + /* Find first nonzero *word*, or the word with the sentinel. */ + while (*wp++ == 0) + continue; + + /* Find the first nonzero *byte*, or the sentinel. */ + vp = wp - 1; + cp = vp; + + while (*cp++ == 0) + continue; + + return cbuf + bufsize < cp; +} + +static void dig_holes(int fd, off_t file_off, off_t len) +{ + off_t file_end = len ? file_off + len : 0; + off_t hole_start = 0, hole_sz = 0; + uintmax_t ct = 0; + size_t bufsz; + char *buf; + struct stat st; +#if defined(POSIX_FADV_SEQUENTIAL) && defined(HAVE_POSIX_FADVISE) + off_t cache_start = file_off; + /* + * We don't want to call POSIX_FADV_DONTNEED to discard cached + * data in PAGE_SIZE steps. IMHO it's overkill (too many syscalls). + * + * Let's assume that 1MiB (on system with 4K page size) is just + * a good compromise. + * -- kzak Feb-2014 + */ + const size_t cachesz = getpagesize() * 256; +#endif + + if (fstat(fd, &st) != 0) + err(EXIT_FAILURE, _("stat of %s failed"), filename); + + bufsz = st.st_blksize; + + if (lseek(fd, file_off, SEEK_SET) < 0) + err(EXIT_FAILURE, _("seek on %s failed"), filename); + + /* buffer + extra space for is_nul() sentinel */ + buf = xmalloc(bufsz + sizeof(uintptr_t)); + while (file_end == 0 || file_off < file_end) { + /* + * Detect data area (skip holes) + */ + off_t end, off; + + off = lseek(fd, file_off, SEEK_DATA); + if ((off == -1 && errno == ENXIO) || + (file_end && off >= file_end)) + break; + + end = lseek(fd, off, SEEK_HOLE); + if (file_end && end > file_end) + end = file_end; + +#if defined(POSIX_FADV_SEQUENTIAL) && defined(HAVE_POSIX_FADVISE) + posix_fadvise(fd, off, end, POSIX_FADV_SEQUENTIAL); +#endif + /* + * Dig holes in the area + */ + while (off < end) { + ssize_t rsz = pread(fd, buf, bufsz, off); + if (rsz < 0 && errno) + err(EXIT_FAILURE, _("%s: read failed"), filename); + if (end && rsz > 0 && off > end - rsz) + rsz = end - off; + if (rsz <= 0) + break; + + if (is_nul(buf, rsz)) { + if (!hole_sz) /* new hole detected */ + hole_start = off; + hole_sz += rsz; + } else if (hole_sz) { + xfallocate(fd, FALLOC_FL_PUNCH_HOLE|FALLOC_FL_KEEP_SIZE, + hole_start, hole_sz); + ct += hole_sz; + hole_sz = hole_start = 0; + } + +#if defined(POSIX_FADV_DONTNEED) && defined(HAVE_POSIX_FADVISE) + /* discard cached data */ + if (off - cache_start > (off_t) cachesz) { + size_t clen = off - cache_start; + + clen = (clen / cachesz) * cachesz; + posix_fadvise(fd, cache_start, clen, POSIX_FADV_DONTNEED); + cache_start = cache_start + clen; + } +#endif + off += rsz; + } + if (hole_sz) { + xfallocate(fd, FALLOC_FL_PUNCH_HOLE|FALLOC_FL_KEEP_SIZE, + hole_start, hole_sz); + ct += hole_sz; + } + file_off = off; + } + + free(buf); + + if (verbose) { + char *str = size_to_human_string(SIZE_SUFFIX_3LETTER | SIZE_SUFFIX_SPACE, ct); + fprintf(stdout, _("%s: %s (%ju bytes) converted to sparse holes.\n"), + filename, str, ct); + free(str); + } +} + +int main(int argc, char **argv) +{ + int c; + int fd; + int mode = 0; + int dig = 0; + int posix = 0; + loff_t length = -2LL; + loff_t offset = 0; + + static const struct option longopts[] = { + { "help", no_argument, NULL, 'h' }, + { "version", no_argument, NULL, 'V' }, + { "keep-size", no_argument, NULL, 'n' }, + { "punch-hole", no_argument, NULL, 'p' }, + { "collapse-range", no_argument, NULL, 'c' }, + { "dig-holes", no_argument, NULL, 'd' }, + { "insert-range", no_argument, NULL, 'i' }, + { "zero-range", no_argument, NULL, 'z' }, + { "offset", required_argument, NULL, 'o' }, + { "length", required_argument, NULL, 'l' }, + { "posix", no_argument, NULL, 'x' }, + { "verbose", no_argument, NULL, 'v' }, + { NULL, 0, NULL, 0 } + }; + + static const ul_excl_t excl[] = { /* rows and cols in ASCII order */ + { 'c', 'd', 'p', 'z' }, + { 'c', 'n' }, + { 'x', 'c', 'd', 'i', 'n', 'p', 'z'}, + { 0 } + }; + int excl_st[ARRAY_SIZE(excl)] = UL_EXCL_STATUS_INIT; + + setlocale(LC_ALL, ""); + bindtextdomain(PACKAGE, LOCALEDIR); + textdomain(PACKAGE); + atexit(close_stdout); + + while ((c = getopt_long(argc, argv, "hvVncpdizxl:o:", longopts, NULL)) + != -1) { + + err_exclusive_options(c, longopts, excl, excl_st); + + switch(c) { + case 'h': + usage(); + break; + case 'c': + mode |= FALLOC_FL_COLLAPSE_RANGE; + break; + case 'd': + dig = 1; + break; + case 'i': + mode |= FALLOC_FL_INSERT_RANGE; + break; + case 'l': + length = cvtnum(optarg); + break; + case 'n': + mode |= FALLOC_FL_KEEP_SIZE; + break; + case 'o': + offset = cvtnum(optarg); + break; + case 'p': + mode |= FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE; + break; + case 'z': + mode |= FALLOC_FL_ZERO_RANGE; + break; + case 'x': +#ifdef HAVE_POSIX_FALLOCATE + posix = 1; + break; +#else + errx(EXIT_FAILURE, _("posix_fallocate support is not compiled")); +#endif + case 'v': + verbose++; + break; + case 'V': + printf(UTIL_LINUX_VERSION); + return EXIT_SUCCESS; + default: + errtryhelp(EXIT_FAILURE); + } + } + + if (optind == argc) + errx(EXIT_FAILURE, _("no filename specified")); + + filename = argv[optind++]; + + if (optind != argc) + errx(EXIT_FAILURE, _("unexpected number of arguments")); + + if (dig) { + /* for --dig-holes the default is analyze all file */ + if (length == -2LL) + length = 0; + if (length < 0) + errx(EXIT_FAILURE, _("invalid length value specified")); + } else { + /* it's safer to require the range specification (--length --offset) */ + if (length == -2LL) + errx(EXIT_FAILURE, _("no length argument specified")); + if (length <= 0) + errx(EXIT_FAILURE, _("invalid length value specified")); + } + if (offset < 0) + errx(EXIT_FAILURE, _("invalid offset value specified")); + + /* O_CREAT makes sense only for the default fallocate(2) behavior + * when mode is no specified and new space is allocated */ + fd = open(filename, O_RDWR | (!dig && !mode ? O_CREAT : 0), + S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH); + if (fd < 0) + err(EXIT_FAILURE, _("cannot open %s"), filename); + + if (dig) + dig_holes(fd, offset, length); +#ifdef HAVE_POSIX_FALLOCATE + else if (posix) + xposix_fallocate(fd, offset, length); +#endif + else + xfallocate(fd, mode, offset, length); + + if (close_fd(fd) != 0) + err(EXIT_FAILURE, _("write failed: %s"), filename); + + return EXIT_SUCCESS; +} |