Adding upstream version 2:8.1.0875.upstream/2%8.1.0875upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 601 insertions, 0 deletions

diff --git a/runtime/doc/usr_08.txt b/runtime/doc/usr_08.txt
new file mode 100644
index 0000000..1f8776a
--- /dev/null
+++ b/runtime/doc/usr_08.txt
@@ -0,0 +1,601 @@
+*usr_08.txt*	For Vim version 8.1.  Last change: 2017 Aug 11
+
+		     VIM USER MANUAL - by Bram Moolenaar
+
+			      Splitting windows
+
+
+Display two different files above each other.  Or view two locations in the
+file at the same time.  See the difference between two files by putting them
+side by side.  All this is possible with split windows.
+
+|08.1|	Split a window
+|08.2|	Split a window on another file
+|08.3|	Window size
+|08.4|	Vertical splits
+|08.5|	Moving windows
+|08.6|	Commands for all windows
+|08.7|	Viewing differences with vimdiff
+|08.8|	Various
+|08.9|	Tab pages
+
+     Next chapter: |usr_09.txt|  Using the GUI
+ Previous chapter: |usr_07.txt|  Editing more than one file
+Table of contents: |usr_toc.txt|
+
+==============================================================================
+*08.1*	Split a window
+
+The easiest way to open a new window is to use the following command: >
+
+	:split
+
+This command splits the screen into two windows and leaves the cursor in the
+top one:
+
+	+----------------------------------+
+	|/* file one.c */		   |
+	|~				   |
+	|~				   |
+	|one.c=============================|
+	|/* file one.c */		   |
+	|~				   |
+	|one.c=============================|
+	|				   |
+	+----------------------------------+
+
+What you see here is two windows on the same file.  The line with "====" is
+the status line.  It displays information about the window above it.  (In
+practice the status line will be in reverse video.)
+   The two windows allow you to view two parts of the same file.  For example,
+you could make the top window show the variable declarations of a program, and
+the bottom one the code that uses these variables.
+
+The CTRL-W w command can be used to jump between the windows.  If you are in
+the top window, CTRL-W w jumps to the window below it.  If you are in the
+bottom window it will jump to the first window.  (CTRL-W CTRL-W does the same
+thing, in case you let go of the CTRL key a bit later.)
+
+
+CLOSE THE WINDOW
+
+To close a window, use the command: >
+
+	:close
+
+Actually, any command that quits editing a file works, like ":quit" and "ZZ".
+But ":close" prevents you from accidentally exiting Vim when you close the
+last window.
+
+
+CLOSING ALL OTHER WINDOWS
+
+If you have opened a whole bunch of windows, but now want to concentrate on
+one of them, this command will be useful: >
+
+	:only
+
+This closes all windows, except for the current one.  If any of the other
+windows has changes, you will get an error message and that window won't be
+closed.
+
+==============================================================================
+*08.2*	Split a window on another file
+
+The following command opens a second window and starts editing the given file:
+>
+	:split two.c
+
+If you were editing one.c, then the result looks like this:
+
+	+----------------------------------+
+	|/* file two.c */		   |
+	|~				   |
+	|~				   |
+	|two.c=============================|
+	|/* file one.c */		   |
+	|~				   |
+	|one.c=============================|
+	|				   |
+	+----------------------------------+
+
+To open a window on a new, empty file, use this: >
+
+	:new
+
+You can repeat the ":split" and ":new" commands to create as many windows as
+you like.
+
+==============================================================================
+*08.3*	Window size
+
+The ":split" command can take a number argument.  If specified, this will be
+the height of the new window.  For example, the following opens a new window
+three lines high and starts editing the file alpha.c: >
+
+	:3split alpha.c
+
+For existing windows you can change the size in several ways.  When you have a
+working mouse, it is easy: Move the mouse pointer to the status line that
+separates two windows, and drag it up or down.
+
+To increase the size of a window: >
+
+	CTRL-W +
+
+To decrease it: >
+
+	CTRL-W -
+
+Both of these commands take a count and increase or decrease the window size
+by that many lines.  Thus "4 CTRL-W +" make the window four lines higher.
+
+To set the window height to a specified number of lines: >
+
+	{height}CTRL-W _
+
+That's: a number {height}, CTRL-W and then an underscore (the - key with Shift
+on English-US keyboards).
+   To make a window as high as it can be, use the CTRL-W _ command without a
+count.
+
+
+USING THE MOUSE
+
+In Vim you can do many things very quickly from the keyboard.  Unfortunately,
+the window resizing commands require quite a bit of typing.  In this case,
+using the mouse is faster.  Position the mouse pointer on a status line.  Now
+press the left mouse button and drag.  The status line will move, thus making
+the window on one side higher and the other smaller.
+
+
+OPTIONS
+
+The 'winheight' option can be set to a minimal desired height of a window and
+'winminheight' to a hard minimum height.
+   Likewise, there is 'winwidth' for the minimal desired width and
+'winminwidth' for the hard minimum width.
+   The 'equalalways' option, when set, makes Vim equalize the windows sizes
+when a window is closed or opened.
+
+==============================================================================
+*08.4*	Vertical splits
+
+The ":split" command creates the new window above the current one.  To make
+the window appear at the left side, use: >
+
+	:vsplit
+
+or: >
+	:vsplit two.c
+
+The result looks something like this:
+
+	+--------------------------------------+
+	|/* file two.c */   |/* file one.c */  |
+	|~		    |~		       |
+	|~		    |~		       |
+	|~		    |~		       |
+	|two.c===============one.c=============|
+	|				       |
+	+--------------------------------------+
+
+Actually, the | lines in the middle will be in reverse video.  This is called
+the vertical separator.  It separates the two windows left and right of it.
+
+There is also the ":vnew" command, to open a vertically split window on a new,
+empty file.  Another way to do this: >
+
+	:vertical new
+
+The ":vertical" command can be inserted before another command that splits a
+window.  This will cause that command to split the window vertically instead
+of horizontally.  (If the command doesn't split a window, it works
+unmodified.)
+
+
+MOVING BETWEEN WINDOWS
+
+Since you can split windows horizontally and vertically as much as you like,
+you can create almost any layout of windows.  Then you can use these commands
+to move between them:
+
+	CTRL-W h	move to the window on the left
+	CTRL-W j	move to the window below
+	CTRL-W k	move to the window above
+	CTRL-W l	move to the window on the right
+
+	CTRL-W t	move to the TOP window
+	CTRL-W b	move to the BOTTOM window
+
+You will notice the same letters as used for moving the cursor.  And the
+cursor keys can also be used, if you like.
+   More commands to move to other windows: |Q_wi|.
+
+==============================================================================
+*08.5*	Moving windows
+
+You have split a few windows, but now they are in the wrong place.  Then you
+need a command to move the window somewhere else.  For example, you have three
+windows like this:
+
+	+----------------------------------+
+	|/* file two.c */		   |
+	|~				   |
+	|~				   |
+	|two.c=============================|
+	|/* file three.c */		   |
+	|~				   |
+	|~				   |
+	|three.c===========================|
+	|/* file one.c */		   |
+	|~				   |
+	|one.c=============================|
+	|				   |
+	+----------------------------------+
+
+Clearly the last one should be at the top.  Go to that window (using CTRL-W w)
+and the type this command: >
+
+	CTRL-W K
+
+This uses the uppercase letter K.  What happens is that the window is moved to
+the very top.  You will notice that K is again used for moving upwards.
+   When you have vertical splits, CTRL-W K will move the current window to the
+top and make it occupy the full width of the Vim window.  If this is your
+layout:
+
+	+-------------------------------------------+
+	|/* two.c */  |/* three.c */  |/* one.c */  |
+	|~	      |~	      |~	    |
+	|~	      |~	      |~	    |
+	|~	      |~	      |~	    |
+	|~	      |~	      |~	    |
+	|~	      |~	      |~	    |
+	|two.c=========three.c=========one.c========|
+	|					    |
+	+-------------------------------------------+
+
+Then using CTRL-W K in the middle window (three.c) will result in:
+
+	+-------------------------------------------+
+	|/* three.c */				    |
+	|~					    |
+	|~					    |
+	|three.c====================================|
+	|/* two.c */	       |/* one.c */	    |
+	|~		       |~		    |
+	|two.c==================one.c===============|
+	|					    |
+	+-------------------------------------------+
+
+The other three similar commands (you can probably guess these now):
+
+	CTRL-W H	move window to the far left
+	CTRL-W J	move window to the bottom
+	CTRL-W L	move window to the far right
+
+==============================================================================
+*08.6*	Commands for all windows
+
+When you have several windows open and you want to quit Vim, you can close
+each window separately.  A quicker way is using this command: >
+
+	:qall
+
+This stands for "quit all".  If any of the windows contain changes, Vim will
+not exit.  The cursor will automatically be positioned in a window with
+changes.  You can then either use ":write" to save the changes, or ":quit!" to
+throw them away.
+
+If you know there are windows with changes, and you want to save all these
+changes, use this command: >
+
+	:wall
+
+This stands for "write all".  But actually, it only writes files with
+changes.  Vim knows it doesn't make sense to write files that were not
+changed.
+   And then there is the combination of ":qall" and ":wall": the "write and
+quit all" command: >
+
+	:wqall
+
+This writes all modified files and quits Vim.
+   Finally, there is a command that quits Vim and throws away all changes: >
+
+	:qall!
+
+Be careful, there is no way to undo this command!
+
+
+OPENING A WINDOW FOR ALL ARGUMENTS
+
+To make Vim open a window for each file, start it with the "-o" argument: >
+
+	vim -o one.txt two.txt three.txt
+
+This results in:
+
+	+-------------------------------+
+	|file one.txt			|
+	|~				|
+	|one.txt========================|
+	|file two.txt			|
+	|~				|
+	|two.txt========================|
+	|file three.txt			|
+	|~				|
+	|three.txt======================|
+	|				|
+	+-------------------------------+
+
+The "-O" argument is used to get vertically split windows.
+   When Vim is already running, the ":all" command opens a window for each
+file in the argument list.  ":vertical all" does it with vertical splits.
+
+==============================================================================
+*08.7*	Viewing differences with vimdiff
+
+There is a special way to start Vim, which shows the differences between two
+files.  Let's take a file "main.c" and insert a few characters in one line.
+Write this file with the 'backup' option set, so that the backup file
+"main.c~" will contain the previous version of the file.
+   Type this command in a shell (not in Vim): >
+
+	vimdiff main.c~ main.c
+
+Vim will start, with two windows side by side.  You will only see the line
+in which you added characters, and a few lines above and below it.
+
+	 VV		      VV
+	+-----------------------------------------+
+	|+ +--123 lines: /* a|+ +--123 lines: /* a|  <- fold
+	|  text		     |	text		  |
+	|  text		     |	text		  |
+	|  text		     |	text		  |
+	|  text		     |	changed text	  |  <- changed line
+	|  text		     |	text		  |
+	|  text		     |	------------------|  <- deleted line
+	|  text		     |	text		  |
+	|  text		     |	text		  |
+	|  text		     |	text		  |
+	|+ +--432 lines: text|+ +--432 lines: text|  <- fold
+	|  ~		     |	~		  |
+	|  ~		     |	~		  |
+	|main.c~==============main.c==============|
+	|					  |
+	+-----------------------------------------+
+
+(This picture doesn't show the highlighting, use the vimdiff command for a
+better look.)
+
+The lines that were not modified have been collapsed into one line.  This is
+called a closed fold.  They are indicated in the picture with "<- fold".  Thus
+the single fold line at the top stands for 123 text lines.  These lines are
+equal in both files.
+   The line marked with "<- changed line" is highlighted, and the inserted
+text is displayed with another color.  This clearly shows what the difference
+is between the two files.
+   The line that was deleted is displayed with "---" in the main.c window.
+See the "<- deleted line" marker in the picture.  These characters are not
+really there.  They just fill up main.c, so that it displays the same number
+of lines as the other window.
+
+
+THE FOLD COLUMN
+
+Each window has a column on the left with a slightly different background.  In
+the picture above these are indicated with "VV".  You notice there is a plus
+character there, in front of each closed fold.  Move the mouse pointer to that
+plus and click the left button.  The fold will open, and you can see the text
+that it contains.
+   The fold column contains a minus sign for an open fold.  If you click on
+this -, the fold will close.
+   Obviously, this only works when you have a working mouse.  You can also use
+"zo" to open a fold and "zc" to close it.
+
+
+DIFFING IN VIM
+
+Another way to start in diff mode can be done from inside Vim.  Edit the
+"main.c" file, then make a split and show the differences: >
+
+	:edit main.c
+	:vertical diffsplit main.c~ 
+
+The ":vertical" command is used to make the window split vertically.  If you
+omit this, you will get a horizontal split.
+
+If you have a patch or diff file, you can use the third way to start diff
+mode.  First edit the file to which the patch applies.  Then tell Vim the name
+of the patch file: >
+
+	:edit main.c
+	:vertical diffpatch main.c.diff
+
+WARNING: The patch file must contain only one patch, for the file you are
+editing.  Otherwise you will get a lot of error messages, and some files might
+be patched unexpectedly.
+   The patching will only be done to the copy of the file in Vim.  The file on
+your harddisk will remain unmodified (until you decide to write the file).
+
+
+SCROLL BINDING
+
+When the files have more changes, you can scroll in the usual way.  Vim will
+try to keep both the windows start at the same position, so you can easily see
+the differences side by side.
+   When you don't want this for a moment, use this command: >
+
+	:set noscrollbind
+
+
+JUMPING TO CHANGES
+
+When you have disabled folding in some way, it may be difficult to find the
+changes.  Use this command to jump forward to the next change: >
+
+	]c
+
+To go the other way use: >
+
+	[c
+
+Prepended a count to jump further away.
+
+
+REMOVING CHANGES
+
+You can move text from one window to the other.  This either removes
+differences or adds new ones.  Vim doesn't keep the highlighting updated in
+all situations.  To update it use this command: >
+
+	:diffupdate
+
+To remove a difference, you can move the text in a highlighted block from one
+window to another.  Take the "main.c" and "main.c~" example above.  Move the
+cursor to the left window, on the line that was deleted in the other window.
+Now type this command: >
+
+	dp
+
+The change will be removed by putting the text of the current window in the
+other window.  "dp" stands for "diff put".
+   You can also do it the other way around.  Move the cursor to the right
+window, to the line where "changed" was inserted.  Now type this command: >
+
+	do
+
+The change will now be removed by getting the text from the other window.
+Since there are no changes left now, Vim puts all text in a closed fold.
+"do" stands for "diff obtain".  "dg" would have been better, but that already
+has a different meaning ("dgg" deletes from the cursor until the first line).
+
+For details about diff mode, see |vimdiff|.
+
+==============================================================================
+*08.8*	Various
+
+The 'laststatus' option can be used to specify when the last window has a
+statusline:
+
+	0	never
+	1	only when there are split windows (the default)
+	2	always
+
+Many commands that edit another file have a variant that splits the window.
+For Command-line commands this is done by prepending an "s".  For example:
+":tag" jumps to a tag, ":stag" splits the window and jumps to a
+tag.
+   For Normal mode commands a CTRL-W is prepended.  CTRL-^ jumps to the
+alternate file, CTRL-W CTRL-^ splits the window and edits the alternate file.
+
+The 'splitbelow' option can be set to make a new window appear below the
+current window.  The 'splitright' option can be set to make a vertically split
+window appear right of the current window.
+
+When splitting a window you can prepend a modifier command to tell where the
+window is to appear:
+
+	:leftabove {cmd}	left or above the current window
+	:aboveleft {cmd}	idem
+	:rightbelow {cmd}	right or below the current window
+	:belowright {cmd}	idem
+	:topleft {cmd}		at the top or left of the Vim window
+	:botright {cmd}		at the bottom or right of the Vim window
+
+
+==============================================================================
+*08.9*	Tab pages
+
+You will have noticed that windows never overlap.  That means you quickly run
+out of screen space.  The solution for this is called Tab pages.
+
+Assume you are editing "thisfile".  To create a new tab page use this command: >
+
+	:tabedit thatfile
+
+This will edit the file "thatfile" in a window that occupies the whole Vim
+window.  And you will notice a bar at the top with the two file names:
+
+	+----------------------------------+
+	| thisfile | /thatfile/ __________X|    (thatfile is bold)
+	|/* thatfile */			   |
+	|that				   |
+	|that				   |
+	|~				   |
+	|~				   |
+	|~				   |
+	|				   |
+	+----------------------------------+
+
+You now have two tab pages.  The first one has a window for "thisfile" and the
+second one a window for "thatfile".  It's like two pages that are on top of
+each other, with a tab sticking out of each page showing the file name.
+
+Now use the mouse to click on "thisfile" in the top line.  The result is
+
+	+----------------------------------+
+	| /thisfile/ | thatfile __________X|    (thisfile is bold)
+	|/* thisfile */			   |
+	|this				   |
+	|this				   |
+	|~				   |
+	|~				   |
+	|~				   |
+	|				   |
+	+----------------------------------+
+
+Thus you can switch between tab pages by clicking on the label in the top
+line.  If you don't have a mouse or don't want to use it, you can use the "gt"
+command.  Mnemonic: Goto Tab.
+
+Now let's create another tab page with the command: >
+
+	:tab split
+
+This makes a new tab page with one window that is editing the same buffer as
+the window we were in:
+
+	+-------------------------------------+
+	| thisfile | /thisfile/ | thatfile __X|   (thisfile is bold)
+	|/* thisfile */			      |
+	|this				      |
+	|this				      |
+	|~				      |
+	|~				      |
+	|~				      |
+	|				      |
+	+-------------------------------------+
+
+You can put ":tab" before any Ex command that opens a window.  The window will
+be opened in a new tab page.  Another example: >
+
+	:tab help gt
+
+Will show the help text for "gt" in a new tab page.
+
+A few more things you can do with tab pages:
+
+- click with the mouse in the space after the last label
+	The next tab page will be selected, like with "gt".
+
+- click with the mouse on the "X" in the top right corner
+	The current tab page will be closed.  Unless there are unsaved
+	changes in the current tab page.
+
+- double click with the mouse in the top line
+	A new tab page will be created.
+
+- the "tabonly" command
+	Closes all tab pages except the current one.  Unless there are unsaved
+	changes in other tab pages.
+
+For more information about tab pages see |tab-page|.
+
+==============================================================================
+
+Next chapter: |usr_09.txt|  Using the GUI
+
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl: