Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 593 insertions, 0 deletions

diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/servr_uu.c b/src/libs/xpcom18a4/nsprpub/pr/tests/servr_uu.c
new file mode 100644
index 00000000..3bd1d574
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/pr/tests/servr_uu.c
@@ -0,0 +1,593 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/***********************************************************************
+**
+** This server simulates a server running in loopback mode.
+**
+** The idea is that a single server is created.  The server initially creates
+** a number of worker threads.  Then, with the server running, a number of 
+** clients are created which start requesting service from the server.
+**
+**
+** Modification History:
+** 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
+**	         The debug mode will print all of the printfs associated with this test.
+**			 The regress mode will be the default mode. Since the regress tool limits
+**           the output to a one line status:PASS or FAIL,all of the printf statements
+**			 have been handled with an if (debug_mode) statement.
+** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to
+**			recognize the return code from tha main program.
+***********************************************************************/
+
+/***********************************************************************
+** Includes
+***********************************************************************/
+/* Used to get the command line option */
+#include "plgetopt.h"
+
+#include "nspr.h"
+#include "pprthred.h"
+
+#include <string.h>
+
+#define PORT 15004
+#define THREAD_STACKSIZE 0
+
+static int _iterations = 1000;
+static int _clients = 1;
+static int _client_data = 250;
+static int _server_data = (8*1024);
+
+static PRThreadScope ServerScope, ClientScope;
+
+#define SERVER "Server"
+#define MAIN   "Main"
+
+#define SERVER_STATE_STARTUP 0
+#define SERVER_STATE_READY   1
+#define SERVER_STATE_DYING   2
+#define SERVER_STATE_DEAD    4
+int       ServerState;
+PRLock    *ServerStateCVLock;
+PRCondVar *ServerStateCV;
+
+#ifdef DEBUGPRINTS
+#define DPRINTF printf
+#else
+#define DPRINTF
+#endif
+
+PRIntn failed_already=0;
+PRIntn debug_mode;
+
+static void do_work(void);
+
+/* --- Server state functions --------------------------------------------- */
+void
+SetServerState(char *waiter, PRInt32 state)
+{
+    PR_Lock(ServerStateCVLock);
+    ServerState = state;
+    PR_NotifyCondVar(ServerStateCV);
+
+	if (debug_mode) DPRINTF("\t%s changed state to %d\n", waiter, state);
+
+    PR_Unlock(ServerStateCVLock);
+}
+
+int
+WaitServerState(char *waiter, PRInt32 state)
+{
+    PRInt32 rv;
+
+    PR_Lock(ServerStateCVLock);
+
+    if (debug_mode) DPRINTF("\t%s waiting for state %d\n", waiter, state);
+
+    while(!(ServerState & state))
+        PR_WaitCondVar(ServerStateCV, PR_INTERVAL_NO_TIMEOUT);
+    rv = ServerState;
+
+    if (debug_mode) DPRINTF("\t%s resuming from wait for state %d; state now %d\n", 
+        waiter, state, ServerState);
+    PR_Unlock(ServerStateCVLock);
+
+    return rv;
+}
+
+/* --- Server Functions ------------------------------------------- */
+
+PRLock *workerThreadsLock;
+PRInt32 workerThreads;
+PRInt32 workerThreadsBusy;
+
+void
+WorkerThreadFunc(void *_listenSock)
+{
+    PRFileDesc *listenSock = (PRFileDesc *)_listenSock;
+    PRInt32 bytesRead;
+    PRInt32 bytesWritten;
+    char *dataBuf;
+    char *sendBuf;
+
+    if (debug_mode) DPRINTF("\tServer buffer is %d bytes; %d data, %d netaddrs\n",
+            _client_data+(2*sizeof(PRNetAddr))+32, _client_data, (2*sizeof(PRNetAddr))+32);
+    dataBuf = (char *)PR_MALLOC(_client_data + 2*sizeof(PRNetAddr) + 32);
+    if (!dataBuf)
+        if (debug_mode) printf("\tServer could not malloc space!?\n");
+    sendBuf = (char *)PR_MALLOC(_server_data *sizeof(char));
+    if (!sendBuf)
+        if (debug_mode) printf("\tServer could not malloc space!?\n");
+
+    if (debug_mode) DPRINTF("\tServer worker thread running\n");
+
+    while(1) {
+        PRInt32 bytesToRead = _client_data;
+        PRInt32 bytesToWrite = _server_data;
+        PRFileDesc *newSock;
+        PRNetAddr *rAddr;
+        PRInt32 loops = 0;
+
+        loops++;
+
+        if (debug_mode) DPRINTF("\tServer thread going into accept\n");
+
+        bytesRead = PR_AcceptRead(listenSock, 
+                                  &newSock,
+                                  &rAddr,
+                                  dataBuf,
+                                  bytesToRead,
+                                  PR_INTERVAL_NO_TIMEOUT);
+
+        if (bytesRead < 0) {
+            if (debug_mode) printf("\tServer error in accept (%d)\n", bytesRead);
+            continue;
+        }
+
+        if (debug_mode) DPRINTF("\tServer accepted connection (%d bytes)\n", bytesRead);
+        
+        PR_AtomicIncrement(&workerThreadsBusy);
+        if (workerThreadsBusy == workerThreads) {
+
+            PR_Lock(workerThreadsLock);
+            if (workerThreadsBusy == workerThreads) {
+                PRThread *WorkerThread;
+
+                WorkerThread = PR_CreateThread(
+                                  PR_SYSTEM_THREAD,
+                                  WorkerThreadFunc,
+                                  listenSock,
+                                  PR_PRIORITY_NORMAL,
+                                  ServerScope,
+                                  PR_UNJOINABLE_THREAD,
+                                  THREAD_STACKSIZE);
+
+                if (!WorkerThread)
+                    if (debug_mode) printf("Error creating client thread %d\n", workerThreads);
+                else {
+                    PR_AtomicIncrement(&workerThreads);
+                    if (debug_mode) DPRINTF("\tServer creates worker (%d)\n", workerThreads);
+                }
+            }
+            PR_Unlock(workerThreadsLock);
+        }
+ 
+        bytesToRead -= bytesRead;
+        while (bytesToRead) {
+            bytesRead = PR_Recv(newSock, 
+                                dataBuf, 
+                                bytesToRead, 
+                                0, 
+                                PR_INTERVAL_NO_TIMEOUT);
+            if (bytesRead < 0) {
+                if (debug_mode) printf("\tServer error receiving data (%d)\n", bytesRead);
+                continue;
+            }
+            if (debug_mode) DPRINTF("\tServer received %d bytes\n", bytesRead);
+        }
+
+        bytesWritten = PR_Send(newSock,
+                               sendBuf, 
+                               bytesToWrite, 
+                               0, 
+                               PR_INTERVAL_NO_TIMEOUT);
+        if (bytesWritten != _server_data)
+            if (debug_mode) printf("\tError sending data to client (%d, %d)\n", 
+                bytesWritten, PR_GetOSError());
+        else
+            if (debug_mode) DPRINTF("\tServer sent %d bytes\n", bytesWritten);
+
+        PR_Close(newSock);
+        PR_AtomicDecrement(&workerThreadsBusy);
+    }
+}
+
+PRFileDesc *
+ServerSetup(void)
+{
+    PRFileDesc *listenSocket;
+    PRSocketOptionData sockOpt;
+    PRNetAddr serverAddr;
+    PRThread *WorkerThread;
+
+    if ( (listenSocket = PR_NewTCPSocket()) == NULL) {
+        if (debug_mode) printf("\tServer error creating listen socket\n");
+		else failed_already=1;
+        return NULL;
+    }
+
+    sockOpt.option = PR_SockOpt_Reuseaddr;
+    sockOpt.value.reuse_addr = PR_TRUE;
+    if ( PR_SetSocketOption(listenSocket, &sockOpt) == PR_FAILURE) {
+        if (debug_mode) printf("\tServer error setting socket option: OS error %d\n",
+                PR_GetOSError());
+		else failed_already=1;
+        PR_Close(listenSocket);
+        return NULL;
+    }
+
+    memset(&serverAddr, 0, sizeof(PRNetAddr));
+    serverAddr.inet.family = PR_AF_INET;
+    serverAddr.inet.port = PR_htons(PORT);
+    serverAddr.inet.ip = PR_htonl(PR_INADDR_ANY);
+
+    if ( PR_Bind(listenSocket, &serverAddr) == PR_FAILURE) {
+        if (debug_mode) printf("\tServer error binding to server address: OS error %d\n",
+                PR_GetOSError());
+		else failed_already=1;
+        PR_Close(listenSocket);
+        return NULL;
+    }
+
+    if ( PR_Listen(listenSocket, 128) == PR_FAILURE) {
+        if (debug_mode) printf("\tServer error listening to server socket\n");
+		else failed_already=1;
+        PR_Close(listenSocket);
+
+        return NULL;
+    }
+
+    /* Create Clients */
+    workerThreads = 0;
+    workerThreadsBusy = 0;
+
+    workerThreadsLock = PR_NewLock();
+
+    WorkerThread = PR_CreateThread(
+                      PR_SYSTEM_THREAD,
+                      WorkerThreadFunc,
+                      listenSocket,
+                      PR_PRIORITY_NORMAL,
+                      ServerScope,
+                      PR_UNJOINABLE_THREAD,
+                      THREAD_STACKSIZE);
+
+    if (!WorkerThread) {
+        if (debug_mode) printf("error creating working thread\n");
+        PR_Close(listenSocket);
+        return NULL;
+    }
+    PR_AtomicIncrement(&workerThreads);
+    if (debug_mode) DPRINTF("\tServer created primordial worker thread\n");
+
+    return listenSocket;
+}
+
+/* The main server loop */
+void
+ServerThreadFunc(void *unused)
+{
+    PRFileDesc *listenSocket;
+
+    /* Do setup */
+    listenSocket = ServerSetup();
+
+    if (!listenSocket) {
+        SetServerState(SERVER, SERVER_STATE_DEAD);
+    } else {
+
+        if (debug_mode) DPRINTF("\tServer up\n");
+
+        /* Tell clients they can start now. */
+        SetServerState(SERVER, SERVER_STATE_READY);
+
+        /* Now wait for server death signal */
+        WaitServerState(SERVER, SERVER_STATE_DYING);
+
+        /* Cleanup */
+        SetServerState(SERVER, SERVER_STATE_DEAD);
+    }
+}
+
+/* --- Client Functions ------------------------------------------- */
+
+PRInt32 numRequests;
+PRInt32 numClients;
+PRMonitor *clientMonitor;
+
+void
+ClientThreadFunc(void *unused)
+{
+    PRNetAddr serverAddr;
+    PRFileDesc *clientSocket;
+    char *sendBuf;
+    char *recvBuf;
+    PRInt32 rv;
+    PRInt32 bytesNeeded;
+
+    sendBuf = (char *)PR_MALLOC(_client_data * sizeof(char));
+    if (!sendBuf)
+        if (debug_mode) printf("\tClient could not malloc space!?\n");
+    recvBuf = (char *)PR_MALLOC(_server_data * sizeof(char));
+    if (!recvBuf)
+        if (debug_mode) printf("\tClient could not malloc space!?\n");
+
+    memset(&serverAddr, 0, sizeof(PRNetAddr));
+    serverAddr.inet.family = PR_AF_INET;
+    serverAddr.inet.port = PR_htons(PORT);
+    serverAddr.inet.ip = PR_htonl(PR_INADDR_LOOPBACK);
+
+    while(numRequests > 0) {
+
+        if ( (numRequests % 10) == 0 )
+            if (debug_mode) printf(".");
+        if (debug_mode) DPRINTF("\tClient starting request %d\n", numRequests);
+
+        clientSocket = PR_NewTCPSocket();
+        if (!clientSocket) {
+            if (debug_mode) printf("Client error creating socket: OS error %d\n",
+		    PR_GetOSError());
+            continue;
+        }
+
+        if (debug_mode) DPRINTF("\tClient connecting\n");
+
+        rv = PR_Connect(clientSocket, 
+                        &serverAddr,
+                        PR_INTERVAL_NO_TIMEOUT);
+        if (!clientSocket) {
+            if (debug_mode) printf("\tClient error connecting\n");
+            continue;
+        }
+
+        if (debug_mode) DPRINTF("\tClient connected\n");
+
+        rv = PR_Send(clientSocket, 
+                     sendBuf, 
+                     _client_data, 
+                     0, 
+                     PR_INTERVAL_NO_TIMEOUT);
+        if (rv != _client_data) {
+            if (debug_mode) printf("Client error sending data (%d)\n", rv);
+            PR_Close(clientSocket);
+            continue;
+        }
+
+        if (debug_mode) DPRINTF("\tClient sent %d bytes\n", rv);
+
+        bytesNeeded = _server_data;
+        while(bytesNeeded) {
+            rv = PR_Recv(clientSocket, 
+                         recvBuf, 
+                         bytesNeeded, 
+                         0, 
+                         PR_INTERVAL_NO_TIMEOUT);
+            if (rv <= 0) {
+                if (debug_mode) printf("Client error receiving data (%d) (%d/%d)\n", 
+                    rv, (_server_data - bytesNeeded), _server_data);
+                break;
+            }
+            if (debug_mode) DPRINTF("\tClient received %d bytes; need %d more\n", rv, bytesNeeded - rv);
+            bytesNeeded -= rv;
+        }
+
+        PR_Close(clientSocket);
+ 
+        PR_AtomicDecrement(&numRequests);
+    }
+
+    PR_EnterMonitor(clientMonitor);
+    --numClients;
+    PR_Notify(clientMonitor);
+    PR_ExitMonitor(clientMonitor);
+
+    PR_DELETE(sendBuf);
+    PR_DELETE(recvBuf);
+}
+
+void
+RunClients(void)
+{
+    PRInt32 index;
+
+    numRequests = _iterations;
+    numClients = _clients;
+    clientMonitor = PR_NewMonitor();
+
+    for (index=0; index<_clients; index++) {
+        PRThread *clientThread;
+
+  
+        clientThread = PR_CreateThread(
+                          PR_USER_THREAD,
+                          ClientThreadFunc,
+                          NULL,
+                          PR_PRIORITY_NORMAL,
+                          ClientScope,
+                          PR_UNJOINABLE_THREAD,
+                          THREAD_STACKSIZE);
+
+        if (!clientThread) {
+            if (debug_mode) printf("\terror creating client thread %d\n", index);
+        } else
+            if (debug_mode) DPRINTF("\tMain created client %d/%d\n", index+1, _clients);
+
+    }
+
+    PR_EnterMonitor(clientMonitor);
+    while(numClients)
+        PR_Wait(clientMonitor, PR_INTERVAL_NO_TIMEOUT);
+    PR_ExitMonitor(clientMonitor);
+}
+
+/* --- Main Function ---------------------------------------------- */
+
+static
+void do_work()
+{
+    PRThread *ServerThread;
+    PRInt32 state;
+
+    SetServerState(MAIN, SERVER_STATE_STARTUP);
+    ServerThread = PR_CreateThread(
+                      PR_USER_THREAD,
+                      ServerThreadFunc,
+                      NULL,
+                      PR_PRIORITY_NORMAL,
+                      ServerScope,
+                      PR_JOINABLE_THREAD,
+                      THREAD_STACKSIZE);
+    if (!ServerThread) {
+        if (debug_mode) printf("error creating main server thread\n");
+        return;
+    }
+
+    /* Wait for server to be ready */
+    state = WaitServerState(MAIN, SERVER_STATE_READY|SERVER_STATE_DEAD);
+
+    if (!(state & SERVER_STATE_DEAD)) {
+        /* Run Test Clients */
+        RunClients();
+
+        /* Send death signal to server */
+        SetServerState(MAIN, SERVER_STATE_DYING);
+    }
+
+    PR_JoinThread(ServerThread);
+}
+
+static void do_workUU(void)
+{
+    ServerScope = PR_LOCAL_THREAD;
+    ClientScope = PR_LOCAL_THREAD;
+    do_work();
+}
+
+
+
+static void Measure(void (*func)(void), const char *msg)
+{
+    PRIntervalTime start, stop;
+    double d;
+
+    start = PR_IntervalNow();
+    (*func)();
+    stop = PR_IntervalNow();
+
+    d = (double)PR_IntervalToMicroseconds(stop - start);
+
+    if (debug_mode) printf("\n%40s: %6.2f usec\n", msg, d / _iterations);
+}
+
+
+main(int argc, char **argv)
+{
+	/* The command line argument: -d is used to determine if the test is being run
+	in debug mode. The regress tool requires only one line output:PASS or FAIL.
+	All of the printfs associated with this test has been handled with a if (debug_mode)
+	test.
+	Usage: test_name -d
+	*/
+	PLOptStatus os;
+	PLOptState *opt = PL_CreateOptState(argc, argv, "d:");
+	while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+    {
+		if (PL_OPT_BAD == os) continue;
+        switch (opt->option)
+        {
+        case 'd':  /* debug mode */
+			debug_mode = 1;
+            break;
+         default:
+            break;
+        }
+    }
+	PL_DestroyOptState(opt);
+
+ /* main test */
+    if (debug_mode) {
+		printf("Enter number of iterations: \n");
+		scanf("%d", &_iterations);
+		printf("Enter number of clients   : \n");
+		scanf("%d", &_clients);
+		printf("Enter size of client data : \n");
+		scanf("%d", &_client_data);
+		printf("Enter size of server data : \n");
+		scanf("%d", &_server_data);
+	}
+	else {
+		_iterations = 7;
+		_clients = 7;
+		_client_data = 100;
+		_server_data = 100;
+	}
+
+    if (debug_mode) {
+		printf("\n\n%d iterations with %d client threads.\n", 
+        _iterations, _clients);
+		printf("Sending %d bytes of client data and %d bytes of server data\n", 
+        _client_data, _server_data);
+	}
+    PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0);
+    PR_STDIO_INIT();
+
+    PR_SetThreadRecycleMode(64);
+
+    ServerStateCVLock = PR_NewLock();
+    ServerStateCV = PR_NewCondVar(ServerStateCVLock);
+
+    Measure(do_workUU, "server loop user/user");
+
+    PR_Cleanup();
+	
+	if(failed_already)	
+		return 1;
+	else
+		return 0;
+    
+}