Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 882 insertions, 0 deletions

diff --git a/src/libs/xpcom18a4/nsprpub/tools/.cvsignore b/src/libs/xpcom18a4/nsprpub/tools/.cvsignore
new file mode 100644
index 00000000..f3c7a7c5
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/tools/.cvsignore
@@ -0,0 +1 @@
+Makefile
diff --git a/src/libs/xpcom18a4/nsprpub/tools/Makefile.in b/src/libs/xpcom18a4/nsprpub/tools/Makefile.in
new file mode 100644
index 00000000..eb18de01
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/tools/Makefile.in
@@ -0,0 +1,249 @@
+# 
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is the Netscape Portable Runtime (NSPR).
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1998-2000
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+#! gmake
+
+MOD_DEPTH	= ..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(MOD_DEPTH)/config/autoconf.mk
+
+include $(topsrcdir)/config/config.mk
+
+ifeq ($(OS_TARGET), WIN16)
+OS_CFLAGS = $(OS_EXE_CFLAGS)
+endif
+
+
+DIRS =
+
+CSRCS =             \
+	httpget.c	    \
+	tail.c		    \
+	$(NULL)
+
+ifeq (,$(filter-out WINNT OS2,$(OS_ARCH)))
+PROG_SUFFIX = .exe
+else
+PROG_SUFFIX =
+endif
+
+PROGS = $(addprefix $(OBJDIR)/, $(CSRCS:.c=$(PROG_SUFFIX)))
+
+TARGETS = $(PROGS)
+
+INCLUDES = -I$(dist_includedir) 
+
+NSPR_VERSION = 3
+
+# Setting the variables LDOPTS and LIBPR.  We first initialize
+# them to the default values, then adjust them for some platforms.
+LDOPTS = -L$(dist_libdir)
+LIBPR = -lnspr$(NSPR_VERSION)
+LIBPLC = -lplc$(NSPR_VERSION)
+
+ifeq ($(OS_ARCH), WINNT)
+ifeq ($(OS_TARGET), WIN16)
+  LIBPR = $(dist_libdir)/nspr$(NSPR_VERSION).lib
+  LIBPLC= $(dist_libdir)/plc$(NSPR_VERSION).lib
+else
+LDOPTS = -NOLOGO -DEBUG -DEBUGTYPE:CV -INCREMENTAL:NO
+LIBPR = $(dist_libdir)/libnspr$(NSPR_VERSION).$(LIB_SUFFIX)
+LIBPLC= $(dist_libdir)/libplc$(NSPR_VERSION).$(LIB_SUFFIX)
+endif
+endif
+
+ifeq ($(OS_ARCH),OS2)
+  ifeq ($(MOZ_OS2_TOOLS),VACPP)
+    LDOPTS = -NOE -DEBUG -nologo -PMTYPE:VIO
+    LIBPR = $(dist_libdir)/nspr$(NSPR_VERSION).lib
+    LIBPLC= $(dist_libdir)/plc$(NSPR_VERSION).lib
+  else
+    LDOPTS += -Zomf -Zlinker /PM:VIO
+  endif
+endif
+
+ifneq ($(OS_ARCH), WINNT)
+PWD = $(shell pwd)
+endif
+
+ifeq ($(OS_ARCH), IRIX)
+LDOPTS += -rpath $(PWD)/$(dist_libdir)
+endif
+
+ifeq ($(OS_ARCH), OSF1)
+LDOPTS += -rpath $(PWD)/$(dist_libdir) -lpthread
+endif
+
+ifeq ($(OS_ARCH), HP-UX)
+LDOPTS += -Wl,+s,+b,$(PWD)/$(dist_libdir)
+endif
+
+# AIX
+ifeq ($(OS_ARCH),AIX)
+LDOPTS += -blibpath:$(PWD)/$(dist_libdir):/usr/lib:/lib
+LIBPR = -lnspr$(NSPR_VERSION)_shr
+LIBPLC = -lplc$(NSPR_VERSION)_shr
+endif
+
+# Solaris
+ifeq ($(OS_ARCH), SunOS)
+ifneq ($(OS_RELEASE), 4.1.3_U1)
+ifdef NS_USE_GCC
+LDOPTS += -Xlinker -R -Xlinker $(PWD)/$(dist_libdir)
+else
+LDOPTS += -R $(PWD)/$(dist_libdir)
+endif
+endif
+
+# SunOS 5.4 and 5.5 need to link with -lthread or -lpthread,
+# even though we already linked with these system libraries
+# when we built libnspr.so.
+ifeq ($(OS_RELEASE), 5.4)
+EXTRA_LIBS = -lthread
+endif
+
+ifeq ($(OS_RELEASE), 5.5)
+ifdef USE_PTHREADS
+EXTRA_LIBS = -lpthread
+else
+EXTRA_LIBS = -lthread
+endif
+endif
+endif # SunOS
+
+ifeq ($(OS_ARCH), NCR)
+# XXX: We see some strange problems when we link with libnspr.so.
+# So for now we use static libraries on NCR.  The shared library
+# stuff below is commented out.
+LIBPR = $(dist_libdir)/libnspr$(NSPR_VERSION).a
+LIBPLC = $(dist_libdir)/libplc$(NSPR_VERSION).a
+EXTRA_LIBS = -lsocket -lnsl -ldl
+
+# NCR needs to link against -lsocket -lnsl (and -lc, which is linked
+# implicitly by $(CC)) again even though we already linked with these
+# system libraries when we built libnspr.so.
+#EXTRA_LIBS = -lsocket -lnsl
+# This hardcodes in the executable programs the directory to find
+# libnspr.so etc. at program startup.  Equivalent to the -R or -rpath 
+# option for ld on other platforms.
+#export LD_RUN_PATH = $(PWD)/$(dist_libdir)
+endif
+
+ifeq ($(OS_ARCH), SCOOS)
+# SCO Unix needs to link against -lsocket again even though we
+# already linked with these system libraries when we built libnspr.so.
+EXTRA_LIBS = -lsocket
+# This hardcodes in the executable programs the directory to find
+# libnspr.so etc. at program startup.  Equivalent to the -R or -rpath 
+# option for ld on other platforms.
+export LD_RUN_PATH = $(PWD)/$(dist_libdir)
+endif
+
+#####################################################
+#
+# The rules
+#
+#####################################################
+
+include $(topsrcdir)/config/rules.mk
+
+AIX_PRE_4_2 = 0
+ifeq ($(OS_ARCH),AIX)
+ifneq ($(OS_RELEASE),4.2)
+ifneq ($(USE_PTHREADS), 1)
+#AIX_PRE_4_2 = 1
+endif
+endif
+endif
+
+ifeq ($(AIX_PRE_4_2),1)
+
+# AIX releases prior to 4.2 need a special two-step linking hack
+# in order to both override the system select() and be able to 
+# get at the original system select().
+#
+# We use a pattern rule in ns/nspr20/config/rules.mk to generate
+# the .$(OBJ_SUFFIX) file from the .c source file, then do the
+# two-step linking hack below.
+
+$(OBJDIR)/%: $(OBJDIR)/%.$(OBJ_SUFFIX)
+	@$(MAKE_OBJDIR)
+	rm -f $@ $(AIX_TMP)
+	$(CC) $(AIX_LINK_OPTS) -o $(AIX_TMP) $< $(dist_libdir)/libnspr$(NSPR_VERSION).a
+	$(CC) -o $@ $(AIX_TMP) $(AIX_WRAP)
+	rm -f $(AIX_TMP)
+
+else
+
+# All platforms that are not AIX pre-4.2.
+
+$(OBJDIR)/%$(PROG_SUFFIX): $(OBJDIR)/%.$(OBJ_SUFFIX)
+	@$(MAKE_OBJDIR)
+ifeq ($(OS_ARCH), WINNT)
+ifeq ($(OS_TARGET),WIN16)
+	echo system windows >w16link
+	echo option map >>w16link
+	echo option stack=10K >>w16link
+	echo option heapsize=32K >>w16link
+	echo debug $(DEBUGTYPE) all >>w16link
+	echo name $@  >>w16link
+	echo file >>w16link
+	echo $<  >>w16link
+	echo library  >>w16link
+	echo $(LIBPR),	     >>w16link
+	echo $(LIBPLC),		 >>w16link
+	echo winsock.lib     >>w16link
+	wlink @w16link.
+else
+	link $(LDOPTS) $< $(LIBPR) $(LIBPLC) wsock32.lib -out:$@
+endif
+else
+ifeq ($(OS_ARCH),OS2)
+	$(LINK) $(LDOPTS) $< $(LIBPR) $(LIBPLC) $(OS_LIBS) $(EXTRA_LIBS) -o $@
+else
+	$(CC) $(XCFLAGS) $< $(LDOPTS) $(LIBPR) $(LIBPLC) $(EXTRA_LIBS) -o $@
+endif
+endif
+endif
+
+export:: $(TARGETS)
+clean::
+	rm -f $(TARGETS)
+
diff --git a/src/libs/xpcom18a4/nsprpub/tools/httpget.c b/src/libs/xpcom18a4/nsprpub/tools/httpget.c
new file mode 100644
index 00000000..6eea9351
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/tools/httpget.c
@@ -0,0 +1,466 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+
+/*
+ * Author: Wan-Teh Chang
+ *
+ * Given an HTTP URL, httpget uses the GET method to fetch the file.
+ * The fetched file is written to stdout by default, or can be
+ * saved in an output file.
+ *
+ * This is a single-threaded program.
+ */
+
+#include "prio.h"
+#include "prnetdb.h"
+#include "prlog.h"
+#include "prerror.h"
+#include "prprf.h"
+#include "prinit.h"
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>  /* for atoi */
+
+#define FCOPY_BUFFER_SIZE (16 * 1024)
+#define INPUT_BUFFER_SIZE 1024
+#define LINE_SIZE 512
+#define HOST_SIZE 256
+#define PORT_SIZE 32
+#define PATH_SIZE 512
+
+/*
+ * A buffer for storing the excess input data for ReadLine.
+ * The data in the buffer starts from (including) the element pointed to
+ * by inputHead, and ends just before (not including) the element pointed
+ * to by inputTail.  The buffer is empty if inputHead == inputTail.
+ */
+
+static char inputBuf[INPUT_BUFFER_SIZE];
+/*
+ * inputBufEnd points just past the end of inputBuf
+ */
+static char *inputBufEnd = inputBuf + sizeof(inputBuf);
+static char *inputHead = inputBuf;
+static char *inputTail = inputBuf;
+
+static PRBool endOfStream = PR_FALSE;
+
+/*
+ * ReadLine --
+ *
+ * Read in a line of text, terminated by CRLF or LF, from fd into buf.
+ * The terminating CRLF or LF is included (always as '\n').  The text
+ * in buf is terminated by a null byte.  The excess bytes are stored in
+ * inputBuf for use in the next ReadLine call or FetchFile call.
+ * Returns the number of bytes in buf.  0 means end of stream.  Returns
+ * -1 if read fails.
+ */
+
+PRInt32 ReadLine(PRFileDesc *fd, char *buf, PRUint32 bufSize)
+{
+    char *dst = buf;
+    char *bufEnd = buf + bufSize;  /* just past the end of buf */
+    PRBool lineFound = PR_FALSE;
+    char *crPtr = NULL;  /* points to the CR ('\r') character */
+    PRInt32 nRead;
+
+loop:
+    PR_ASSERT(inputBuf <= inputHead && inputHead <= inputTail
+	    && inputTail <= inputBufEnd);
+    while (lineFound == PR_FALSE && inputHead != inputTail
+	    && dst < bufEnd - 1) {
+	if (*inputHead == '\r') {
+	    crPtr = dst;
+	} else if (*inputHead == '\n') {
+	    lineFound = PR_TRUE;
+	    if (crPtr == dst - 1) {
+		dst--; 
+	    }
+	}
+	*(dst++) = *(inputHead++);
+    }
+    if (lineFound == PR_TRUE || dst == bufEnd - 1 || endOfStream == PR_TRUE) {
+	*dst = '\0';
+	return dst - buf;
+    }
+
+    /*
+     * The input buffer should be empty now
+     */
+    PR_ASSERT(inputHead == inputTail);
+
+    nRead = PR_Read(fd, inputBuf, sizeof(inputBuf));
+    if (nRead == -1) {
+	*dst = '\0';
+	return -1;
+    } else if (nRead == 0) {
+	endOfStream = PR_TRUE;
+	*dst = '\0';
+	return dst - buf;
+    }
+    inputHead = inputBuf;
+    inputTail = inputBuf + nRead;
+    goto loop;
+}
+
+PRInt32 DrainInputBuffer(char *buf, PRUint32 bufSize)
+{
+    PRInt32 nBytes = inputTail - inputHead;
+
+    if (nBytes == 0) {
+	if (endOfStream) {
+	    return -1;
+	} else {
+	    return 0;
+	}
+    }
+    if ((PRInt32) bufSize < nBytes) {
+	nBytes = bufSize;
+    }
+    memcpy(buf, inputHead, nBytes);
+    inputHead += nBytes;
+    return nBytes;
+}
+
+PRStatus FetchFile(PRFileDesc *in, PRFileDesc *out)
+{
+    char buf[FCOPY_BUFFER_SIZE];
+    PRInt32 nBytes;
+
+    while ((nBytes = DrainInputBuffer(buf, sizeof(buf))) > 0) {
+	if (PR_Write(out, buf, nBytes) != nBytes) {
+            fprintf(stderr, "httpget: cannot write to file\n");
+	    return PR_FAILURE;
+	}
+    }
+    if (nBytes < 0) {
+	/* Input buffer is empty and end of stream */
+	return PR_SUCCESS;
+    }
+    while ((nBytes = PR_Read(in, buf, sizeof(buf))) > 0) {
+	if (PR_Write(out, buf, nBytes) != nBytes) {
+	    fprintf(stderr, "httpget: cannot write to file\n");
+	    return PR_FAILURE;
+        }
+    }
+    if (nBytes < 0) {
+	fprintf(stderr, "httpget: cannot read from socket\n");
+	return PR_FAILURE;
+    }
+    return PR_SUCCESS;
+}
+
+PRStatus FastFetchFile(PRFileDesc *in, PRFileDesc *out, PRUint32 size)
+{
+    PRInt32 nBytes;
+    PRFileMap *outfMap;
+    void *addr;
+    char *start;
+    PRUint32 rem;
+    PRUint32 bytesToRead;
+    PRStatus rv;
+    PRInt64 sz64;
+
+    LL_UI2L(sz64, size);
+    outfMap = PR_CreateFileMap(out, sz64, PR_PROT_READWRITE);
+    PR_ASSERT(outfMap);
+    addr = PR_MemMap(outfMap, LL_ZERO, size);
+    if (addr == (void *) -1) {
+	fprintf(stderr, "cannot memory-map file: (%d, %d)\n", PR_GetError(),
+		PR_GetOSError());
+
+	PR_CloseFileMap(outfMap);
+	return PR_FAILURE;
+    }
+    PR_ASSERT(addr != (void *) -1);
+    start = (char *) addr;
+    rem = size;
+    while ((nBytes = DrainInputBuffer(start, rem)) > 0) {
+	start += nBytes;
+	rem -= nBytes;
+    }
+    if (nBytes < 0) {
+	/* Input buffer is empty and end of stream */
+	return PR_SUCCESS;
+    }
+    bytesToRead = (rem < FCOPY_BUFFER_SIZE) ? rem : FCOPY_BUFFER_SIZE;
+    while (rem > 0 && (nBytes = PR_Read(in, start, bytesToRead)) > 0) {
+	start += nBytes;
+	rem -= nBytes;
+        bytesToRead = (rem < FCOPY_BUFFER_SIZE) ? rem : FCOPY_BUFFER_SIZE;
+    }
+    if (nBytes < 0) {
+	fprintf(stderr, "httpget: cannot read from socket\n");
+	return PR_FAILURE;
+    }
+    rv = PR_MemUnmap(addr, size);
+    PR_ASSERT(rv == PR_SUCCESS);
+    rv = PR_CloseFileMap(outfMap);
+    PR_ASSERT(rv == PR_SUCCESS);
+    return PR_SUCCESS;
+}
+
+PRStatus ParseURL(char *url, char *host, PRUint32 hostSize,
+    char *port, PRUint32 portSize, char *path, PRUint32 pathSize)
+{
+    char *start, *end;
+    char *dst;
+    char *hostEnd;
+    char *portEnd;
+    char *pathEnd;
+
+    if (strncmp(url, "http", 4)) {
+	fprintf(stderr, "httpget: the protocol must be http\n");
+	return PR_FAILURE;
+    }
+    if (strncmp(url + 4, "://", 3) || url[7] == '\0') {
+	fprintf(stderr, "httpget: malformed URL: %s\n", url);
+	return PR_FAILURE;
+    }
+
+    start = end = url + 7;
+    dst = host;
+    hostEnd = host + hostSize;
+    while (*end && *end != ':' && *end != '/') {
+	if (dst == hostEnd - 1) {
+	    fprintf(stderr, "httpget: host name too long\n");
+	    return PR_FAILURE;
+	}
+	*(dst++) = *(end++);
+    }
+    *dst = '\0';
+
+    if (*end == '\0') {
+	PR_snprintf(port, portSize, "%d", 80);
+	PR_snprintf(path, pathSize, "%s", "/");
+	return PR_SUCCESS;
+    }
+
+    if (*end == ':') {
+	end++;
+	dst = port;
+	portEnd = port + portSize;
+	while (*end && *end != '/') {
+	    if (dst == portEnd - 1) {
+		fprintf(stderr, "httpget: port number too long\n");
+		return PR_FAILURE;
+	    }
+	    *(dst++) = *(end++);
+        }
+	*dst = '\0';
+	if (*end == '\0') {
+	    PR_snprintf(path, pathSize, "%s", "/");
+	    return PR_SUCCESS;
+        }
+    } else {
+	PR_snprintf(port, portSize, "%d", 80);
+    }
+
+    dst = path;
+    pathEnd = path + pathSize;
+    while (*end) {
+	if (dst == pathEnd - 1) {
+	    fprintf(stderr, "httpget: file pathname too long\n");
+	    return PR_FAILURE;
+	}
+	*(dst++) = *(end++);
+    }
+    *dst = '\0';
+    return PR_SUCCESS;
+}
+
+void PrintUsage(void) {
+    fprintf(stderr, "usage: httpget url\n"
+		    "       httpget -o outputfile url\n"
+		    "       httpget url -o outputfile\n");
+}
+
+int main(int argc, char **argv)
+{
+    PRHostEnt hostentry;
+    char buf[PR_NETDB_BUF_SIZE];
+    PRNetAddr addr;
+    PRFileDesc *socket = NULL, *file = NULL;
+    PRIntn cmdSize;
+    char host[HOST_SIZE];
+    char port[PORT_SIZE];
+    char path[PATH_SIZE];
+    char line[LINE_SIZE];
+    int exitStatus = 0;
+    PRBool endOfHeader = PR_FALSE;
+    char *url;
+    char *fileName = NULL;
+    PRUint32 fileSize;
+
+    if (argc != 2 && argc != 4) {
+	PrintUsage();
+	exit(1);
+    }
+
+    if (argc == 2) {
+	/*
+	 * case 1: httpget url
+	 */
+	url = argv[1];
+    } else {
+	if (strcmp(argv[1], "-o") == 0) {
+	    /*
+	     * case 2: httpget -o outputfile url
+	     */
+	    fileName = argv[2];
+	    url = argv[3];
+        } else {
+	    /*
+	     * case 3: httpget url -o outputfile
+	     */
+	    url = argv[1];
+	    if (strcmp(argv[2], "-o") != 0) {
+		PrintUsage();
+		exit(1);
+            }
+	    fileName = argv[3];
+	}
+    }
+
+    if (ParseURL(url, host, sizeof(host), port, sizeof(port),
+	    path, sizeof(path)) == PR_FAILURE) {
+	exit(1);
+    }
+
+    if (PR_GetHostByName(host, buf, sizeof(buf), &hostentry)
+	    == PR_FAILURE) {
+        fprintf(stderr, "httpget: unknown host name: %s\n", host);
+	exit(1);
+    }
+
+    addr.inet.family = PR_AF_INET;
+    addr.inet.port = PR_htons((short) atoi(port));
+    addr.inet.ip = *((PRUint32 *) hostentry.h_addr_list[0]);
+
+    socket = PR_NewTCPSocket();
+    if (socket == NULL) {
+	fprintf(stderr, "httpget: cannot create new tcp socket\n");
+	exit(1);
+    }
+
+    if (PR_Connect(socket, &addr, PR_INTERVAL_NO_TIMEOUT) == PR_FAILURE) {
+	fprintf(stderr, "httpget: cannot connect to http server\n");
+	exitStatus = 1;
+	goto done;
+    }
+
+    if (fileName == NULL) {
+	file = PR_STDOUT;
+    } else {
+        file = PR_Open(fileName, PR_RDWR | PR_CREATE_FILE | PR_TRUNCATE,
+		00777);
+        if (file == NULL) {
+	    fprintf(stderr, "httpget: cannot open file %s: (%d, %d)\n",
+		    fileName, PR_GetError(), PR_GetOSError());
+	    exitStatus = 1;
+	    goto done;
+	}
+    }
+
+    cmdSize = PR_snprintf(buf, sizeof(buf), "GET %s HTTP/1.0\r\n\r\n", path);
+    PR_ASSERT(cmdSize == (PRIntn) strlen("GET  HTTP/1.0\r\n\r\n")
+            + (PRIntn) strlen(path));
+    if (PR_Write(socket, buf, cmdSize) != cmdSize) {
+	fprintf(stderr, "httpget: cannot write to http server\n");
+	exitStatus = 1;
+	goto done;
+    }
+
+    if (ReadLine(socket, line, sizeof(line)) <= 0) {
+	fprintf(stderr, "httpget: cannot read line from http server\n");
+	exitStatus = 1;
+	goto done;
+    }
+
+    /* HTTP response: 200 == OK */
+    if (strstr(line, "200") == NULL) {
+	fprintf(stderr, "httpget: %s\n", line);
+	exitStatus = 1;
+	goto done;
+    }
+
+    while (ReadLine(socket, line, sizeof(line)) > 0) {
+	if (line[0] == '\n') {
+	    endOfHeader = PR_TRUE;
+	    break;
+	}
+	if (strncmp(line, "Content-Length", 14) == 0
+		|| strncmp(line, "Content-length", 14) == 0) {
+	    char *p = line + 14;
+
+	    while (*p == ' ' || *p == '\t') {
+		p++;
+	    }
+	    if (*p != ':') {
+		continue;
+            }
+	    p++;
+	    while (*p == ' ' || *p == '\t') {
+		p++;
+	    }
+	    fileSize = 0;
+	    while ('0' <= *p && *p <= '9') {
+		fileSize = 10 * fileSize + (*p - '0');
+		p++;
+            }
+	}
+    }
+    if (endOfHeader == PR_FALSE) {
+	fprintf(stderr, "httpget: cannot read line from http server\n");
+	exitStatus = 1;
+	goto done;
+    }
+
+    if (fileName == NULL || fileSize == 0) {
+        FetchFile(socket, file);
+    } else {
+	FastFetchFile(socket, file, fileSize);
+    }
+
+done:
+    if (socket) PR_Close(socket);
+    if (file) PR_Close(file);
+    PR_Cleanup();
+    return exitStatus;
+}
diff --git a/src/libs/xpcom18a4/nsprpub/tools/tail.c b/src/libs/xpcom18a4/nsprpub/tools/tail.c
new file mode 100644
index 00000000..dc729c15
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/tools/tail.c
@@ -0,0 +1,166 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include "prio.h"
+#include "prprf.h"
+#include "prinit.h"
+#include "prthread.h"
+#include "prinrval.h"
+
+#include "plerror.h"
+#include "plgetopt.h"
+
+#include <stdlib.h>
+
+#define BUFFER_SIZE 500
+
+static PRFileDesc *out = NULL, *err = NULL;
+
+static void Help(void)
+{
+    PR_fprintf(err, "Usage: tail [-n <n>] [-f] [-h] <filename>\n");
+    PR_fprintf(err, "\t-t <n>	Dally time in milliseconds\n");
+    PR_fprintf(err, "\t-n <n>	Number of bytes before <eof>\n");
+    PR_fprintf(err, "\t-f   	Follow the <eof>\n");
+    PR_fprintf(err, "\t-h   	This message and nothing else\n");
+}  /* Help */
+
+PRIntn main(PRIntn argc, char **argv)
+{
+	PRIntn rv = 0;
+    PLOptStatus os;
+	PRStatus status;
+	PRFileDesc *file;
+	PRFileInfo fileInfo;
+	PRIntervalTime dally;
+	char buffer[BUFFER_SIZE];
+	PRBool follow = PR_FALSE;
+	const char *filename = NULL;
+	PRUint32 position = 0, seek = 0, time = 0;
+    PLOptState *opt = PL_CreateOptState(argc, argv, "hfn:");
+
+    out = PR_GetSpecialFD(PR_StandardOutput);
+    err = PR_GetSpecialFD(PR_StandardError);
+
+    while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+    {
+        if (PL_OPT_BAD == os) continue;
+        switch (opt->option)
+        {
+		case 0:  /* it's the filename */
+			filename = opt->value;
+			break;
+        case 'n':  /* bytes before end of file */
+            seek = atoi(opt->value);
+            break;
+        case 't':  /* dally time */
+            time = atoi(opt->value);
+            break;
+        case 'f':  /* follow the end of file */
+            follow = PR_TRUE;
+            break;
+        case 'h':  /* user wants some guidance */
+            Help();  /* so give him an earful */
+            return 2;  /* but not a lot else */
+            break;
+         default:
+            break;
+        }
+    }
+    PL_DestroyOptState(opt);
+
+	if (0 == time) time = 1000;
+	dally = PR_MillisecondsToInterval(time);
+
+    if (NULL == filename)
+    {
+        (void)PR_fprintf(out, "Input file not specified\n");
+        rv = 1; goto done;
+    }
+	file = PR_Open(filename, PR_RDONLY, 0);
+	if (NULL == file)
+	{
+		PL_FPrintError(err, "File cannot be opened for reading");
+		return 1;
+	}
+
+	status = PR_GetOpenFileInfo(file, &fileInfo);
+	if (PR_FAILURE == status)
+	{
+		PL_FPrintError(err, "Cannot acquire status of file");
+		rv = 1; goto done;
+	}
+	if (seek > 0)
+	{
+	    if (seek > fileInfo.size) seek = 0;
+		position = PR_Seek(file, (fileInfo.size - seek), PR_SEEK_SET);
+		if (-1 == (PRInt32)position)
+			PL_FPrintError(err, "Cannot seek to starting position");
+	}
+
+	do
+	{
+		while (position < fileInfo.size)
+		{
+			PRInt32 read, bytes = fileInfo.size - position;
+			if (bytes > sizeof(buffer)) bytes = sizeof(buffer);
+			read = PR_Read(file, buffer, bytes);
+			if (read != bytes)
+				PL_FPrintError(err, "Cannot read to eof");
+			position += read;
+			PR_Write(out, buffer, read);
+		}
+
+		if (follow)
+		{
+			PR_Sleep(dally);
+			status = PR_GetOpenFileInfo(file, &fileInfo);
+			if (PR_FAILURE == status)
+			{
+				PL_FPrintError(err, "Cannot acquire status of file");
+				rv = 1; goto done;
+			}
+		}
+	} while (follow);
+
+done:
+	PR_Close(file);
+
+	return rv;
+}  /* main */
+
+/* tail.c */