Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 202 insertions, 0 deletions

diff --git a/src/libs/xpcom18a4/xpcom/ds/nsIArray.idl b/src/libs/xpcom18a4/xpcom/ds/nsIArray.idl
new file mode 100644
index 00000000..c937ec4b
--- /dev/null
+++ b/src/libs/xpcom18a4/xpcom/ds/nsIArray.idl
@@ -0,0 +1,202 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is XPCOM Array interface.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corp.
+ * Portions created by the Initial Developer are Copyright (C) 2002
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Alec Flett <alecf@netscape.com>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include "nsISupports.idl"
+
+interface nsISimpleEnumerator;
+
+/**
+ * nsIArray
+ *
+ * An indexed collection of elements. Provides basic functionality for
+ * retrieving elements at a specific position, searching for
+ * elements. Indexes are zero-based, such that the last element in the
+ * array is stored at the index length-1.
+ *
+ * For an array which can be modified, see nsIMutableArray below.
+ *
+ * Neither interface makes any attempt to protect the individual
+ * elements from modification. The convention is that the elements of
+ * the array should not be modified. Documentation within a specific
+ * interface should describe variations from this convention.
+ *
+ * It is also convention that if an interface provides access to an
+ * nsIArray, that the array should not be QueryInterfaced to an
+ * nsIMutableArray for modification. If the interface in question had
+ * intended the array to be modified, it would have returned an
+ * nsIMutableArray!
+ *
+ * null is a valid entry in the array, and as such any nsISupports
+ * parameters may be null, except where noted.
+ *
+ * @status UNDER_REVIEW
+ */
+[scriptable, uuid(114744d9-c369-456e-b55a-52fe52880d2d)]
+interface nsIArray : nsISupports
+{
+    /**
+     * length
+     *
+     * number of elements in the array.
+     */
+    readonly attribute unsigned long length;
+
+    /**
+     * queryElementAt()
+     *
+     * Retrieve a specific element of the array, and QueryInterface it
+     * to the specified interface. null is a valid result for
+     * this method, but exceptions are thrown in other circumstances
+     * 
+     * @param index position of element
+     * @param uuid the IID of the requested interface
+     * @param result the object, QI'd to the requested interface
+     *
+     * @throws NS_ERROR_NO_INTERFACE when an entry exists at the
+     *         specified index, but the requested interface is not
+     *         available.
+     * @throws NS_ERROR_ILLEGAL_VALUE when index > length-1
+     *
+     */
+    void queryElementAt(in unsigned long index,
+                        in nsIIDRef uuid,
+                        [iid_is(uuid), retval] out nsQIResult result);
+    
+    /**
+     * indexOf()
+     * 
+     * Get the position of a specific element. Note that since null is
+     * a valid input, exceptions are used to indicate that an element
+     * is not found.
+     * 
+     * @param startIndex The initial element to search in the array
+     *                   To start at the beginning, use 0 as the
+     *                   startIndex
+     * @param element    The element you are looking for
+     * @returns a number >= startIndex which is the position of the
+     *          element in the array.
+     * @throws NS_ERROR_NOT_FOUND if the element was not in the array.
+     */
+    unsigned long indexOf(in unsigned long startIndex,
+                          in nsISupports element);
+
+    /**
+     * enumerate the array
+     *
+     * @returns a new enumerator positioned at the start of the array
+     * @throws NS_ERROR_FAILURE if the array is empty (to make it easy
+     *         to detect errors)
+     */
+    nsISimpleEnumerator enumerate();
+
+};
+
+/**
+ * nsIMutableArray
+ * A separate set of methods that will act on the array. Consumers of
+ * nsIArray should not QueryInterface to nsIMutableArray unless they
+ * own the array.
+ *
+ * As above, it is legal to add null elements to the array. Note also
+ * that null elements can be created as a side effect of
+ * insertElementAt(). Conversely, if insertElementAt() is never used,
+ * and null elements are never explicitly added to the array, then it
+ * is guaranteed that queryElementAt() will never return a null value.
+ *
+ * Any of these methods may throw NS_ERROR_OUT_OF_MEMORY when the
+ * array must grow to complete the call, but the allocation fails.
+ *
+ * @status UNDER_REVIEW
+ */
+
+[scriptable, uuid(2cd0b2f8-d4dd-48b8-87ba-b0200501f079)]
+interface nsIMutableArray : nsIArray
+{
+    /**
+     * appendElement()
+     * 
+     * Append an element at the end of the array.
+     *
+     * @param element The element to append.
+     * @param element Whether or not to store the element using a weak
+     *                reference.
+     * @throws NS_ERROR_UNEXPECTED when a weak reference is requested,
+     *                             but the element does not support
+     *                             nsIWeakReference.
+     */
+    void appendElement(in nsISupports element, in boolean weak);
+
+    /**
+     * removeElementAt()
+     * 
+     * Remove an element at a specific position.
+     * To remove a specific element, use indexOf() to find the index
+     * first, then call removeElementAt().
+     *
+     * @param index the position of the item
+     *
+     */
+    void removeElementAt(in unsigned long index);
+
+    /**
+     * insertElementAt()
+     *
+     * Insert an element at the given position, and move all elements
+     * stored at a higher position up one.
+     *
+     * @param element The element to insert
+     * @param index   The position in the array. If the position is
+     *                greater than or equal to the length of the array
+     *                (@see nsIArray) then the array will grow to
+     *                exactly accomadate the index, and the new length
+     *                will be index+1. The newly created entries will
+     *                be null.
+     *
+     * @throws NS_ERROR_FAILURE when a weak reference is requested,
+     *                          but the element does not support
+     *                          nsIWeakReference.
+     */
+    void insertElementAt(in nsISupports element, in unsigned long index, in boolean weak);
+    
+    /**
+     * clear()
+     *
+     * clear the entire array, releasing all stored objects
+     */
+    void clear();
+};