diff options
Diffstat (limited to 'include/iprt/thread.h')
| -rw-r--r-- | include/iprt/thread.h | 972 |
1 files changed, 972 insertions, 0 deletions
diff --git a/include/iprt/thread.h b/include/iprt/thread.h new file mode 100644 index 00000000..8a818446 --- /dev/null +++ b/include/iprt/thread.h @@ -0,0 +1,972 @@ +/** @file + * IPRT - Threads. + */ + +/* + * Copyright (C) 2006-2019 Oracle Corporation + * + * This file is part of VirtualBox Open Source Edition (OSE), as + * available from http://www.virtualbox.org. This file is free software; + * you can redistribute it and/or modify it under the terms of the GNU + * General Public License (GPL) as published by the Free Software + * Foundation, in version 2 as it comes in the "COPYING" file of the + * VirtualBox OSE distribution. VirtualBox OSE is distributed in the + * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. + * + * The contents of this file may alternatively be used under the terms + * of the Common Development and Distribution License Version 1.0 + * (CDDL) only, as it comes in the "COPYING.CDDL" file of the + * VirtualBox OSE distribution, in which case the provisions of the + * CDDL are applicable instead of those of the GPL. + * + * You may elect to license modified versions of this file under the + * terms and conditions of either the GPL or the CDDL or both. + */ + +#ifndef IPRT_INCLUDED_thread_h +#define IPRT_INCLUDED_thread_h +#ifndef RT_WITHOUT_PRAGMA_ONCE +# pragma once +#endif + +#include <iprt/cdefs.h> +#include <iprt/types.h> +#include <iprt/stdarg.h> + + +RT_C_DECLS_BEGIN + +/** @defgroup grp_rt_thread RTThread - Thread Management + * @ingroup grp_rt + * @{ + */ + +/** + * The thread state. + */ +typedef enum RTTHREADSTATE +{ + /** The usual invalid 0 value. */ + RTTHREADSTATE_INVALID = 0, + /** The thread is being initialized. */ + RTTHREADSTATE_INITIALIZING, + /** The thread has terminated */ + RTTHREADSTATE_TERMINATED, + /** Probably running. */ + RTTHREADSTATE_RUNNING, + + /** Waiting on a critical section. */ + RTTHREADSTATE_CRITSECT, + /** Waiting on a event semaphore. */ + RTTHREADSTATE_EVENT, + /** Waiting on a event multiple wakeup semaphore. */ + RTTHREADSTATE_EVENT_MULTI, + /** Waiting on a fast mutex. */ + RTTHREADSTATE_FAST_MUTEX, + /** Waiting on a mutex. */ + RTTHREADSTATE_MUTEX, + /** Waiting on a read write semaphore, read (shared) access. */ + RTTHREADSTATE_RW_READ, + /** Waiting on a read write semaphore, write (exclusive) access. */ + RTTHREADSTATE_RW_WRITE, + /** The thread is sleeping. */ + RTTHREADSTATE_SLEEP, + /** Waiting on a spin mutex. */ + RTTHREADSTATE_SPIN_MUTEX, + /** End of the thread states. */ + RTTHREADSTATE_END, + + /** The usual 32-bit size hack. */ + RTTHREADSTATE_32BIT_HACK = 0x7fffffff +} RTTHREADSTATE; + +/** Checks if a thread state indicates that the thread is sleeping. */ +#define RTTHREAD_IS_SLEEPING(enmState) ((enmState) >= RTTHREADSTATE_CRITSECT) + +/** + * Thread types. + * Besides identifying the purpose of the thread, the thread type is + * used to select the scheduling properties. + * + * The types in are placed in a rough order of ascending priority. + */ +typedef enum RTTHREADTYPE +{ + /** Invalid type. */ + RTTHREADTYPE_INVALID = 0, + /** Infrequent poller thread. + * This type of thread will sleep for the most of the time, and do + * infrequent polls on resources at 0.5 sec or higher intervals. + */ + RTTHREADTYPE_INFREQUENT_POLLER, + /** Main heavy worker thread. + * Thread of this type is driving asynchronous tasks in the Main + * API which takes a long time and might involve a bit of CPU. Like + * for instance creating a fixed sized VDI. + */ + RTTHREADTYPE_MAIN_HEAVY_WORKER, + /** The emulation thread type. + * While being a thread with very high workload it still is vital + * that it gets scheduled frequently. When possible all other thread + * types except DEFAULT and GUI should interrupt this one ASAP when + * they become ready. + */ + RTTHREADTYPE_EMULATION, + /** The default thread type. + * Since it doesn't say much about the purpose of the thread + * nothing special is normally done to the scheduling. This type + * should be avoided. + * The main thread is registered with default type during RTR3Init() + * and that's what the default process priority is derived from. + */ + RTTHREADTYPE_DEFAULT, + /** The GUI thread type + * The GUI normally have a low workload but is frequently scheduled + * to handle events. When possible the scheduler should not leave + * threads of this kind waiting for too long (~50ms). + */ + RTTHREADTYPE_GUI, + /** Main worker thread. + * Thread of this type is driving asynchronous tasks in the Main API. + * In most cases this means little work an a lot of waiting. + */ + RTTHREADTYPE_MAIN_WORKER, + /** VRDP I/O thread. + * These threads are I/O threads in the RDP server will hang around + * waiting for data, process it and pass it on. + */ + RTTHREADTYPE_VRDP_IO, + /** The debugger type. + * Threads involved in servicing the debugger. It must remain + * responsive even when things are running wild in. + */ + RTTHREADTYPE_DEBUGGER, + /** Message pump thread. + * Thread pumping messages from one thread/process to another + * thread/process. The workload is very small, most of the time + * it's blocked waiting for messages to be produced or processed. + * This type of thread will be favored after I/O threads. + */ + RTTHREADTYPE_MSG_PUMP, + /** The I/O thread type. + * Doing I/O means shuffling data, waiting for request to arrive and + * for them to complete. The thread should be favored when competing + * with any other threads except timer threads. + */ + RTTHREADTYPE_IO, + /** The timer thread type. + * A timer thread is mostly waiting for the timer to tick + * and then perform a little bit of work. Accuracy is important here, + * so the thread should be favoured over all threads. If premention can + * be configured at thread level, it could be made very short. + */ + RTTHREADTYPE_TIMER, + /** Only used for validation. */ + RTTHREADTYPE_END +} RTTHREADTYPE; + + +#ifndef IN_RC + +/** + * Checks if the IPRT thread component has been initialized. + * + * This is used to avoid calling into RTThread before the runtime has been + * initialized. + * + * @returns @c true if it's initialized, @c false if not. + */ +RTDECL(bool) RTThreadIsInitialized(void); + +/** + * Get the thread handle of the current thread. + * + * @returns Thread handle. + */ +RTDECL(RTTHREAD) RTThreadSelf(void); + +/** + * Get the native thread handle of the current thread. + * + * @returns Native thread handle. + */ +RTDECL(RTNATIVETHREAD) RTThreadNativeSelf(void); + +/** + * Millisecond granular sleep function. + * + * @returns VINF_SUCCESS on success. + * @returns VERR_INTERRUPTED if a signal or other asynchronous stuff happened + * which interrupt the peaceful sleep. + * @param cMillies Number of milliseconds to sleep. + * 0 milliseconds means yielding the timeslice - deprecated! + * @remark See RTThreadNanoSleep() for sleeping for smaller periods of time. + */ +RTDECL(int) RTThreadSleep(RTMSINTERVAL cMillies); + +/** + * Millisecond granular sleep function, no logger calls. + * + * Same as RTThreadSleep, except it will never call into the IPRT logger. It + * can therefore safely be used in places where the logger is off limits, like + * at termination or init time. The electric fence heap is one consumer of + * this API. + * + * @returns VINF_SUCCESS on success. + * @returns VERR_INTERRUPTED if a signal or other asynchronous stuff happened + * which interrupt the peaceful sleep. + * @param cMillies Number of milliseconds to sleep. + * 0 milliseconds means yielding the timeslice - deprecated! + */ +RTDECL(int) RTThreadSleepNoLog(RTMSINTERVAL cMillies); + +/** + * Yields the CPU. + * + * @returns true if we yielded. + * @returns false if it's probable that we didn't yield. + */ +RTDECL(bool) RTThreadYield(void); + + + +/** + * Thread function. + * + * @returns 0 on success. + * @param ThreadSelf Thread handle to this thread. + * @param pvUser User argument. + */ +typedef DECLCALLBACK(int) FNRTTHREAD(RTTHREAD ThreadSelf, void *pvUser); +/** Pointer to a FNRTTHREAD(). */ +typedef FNRTTHREAD *PFNRTTHREAD; + +/** + * Thread creation flags. + */ +typedef enum RTTHREADFLAGS +{ + /** This flag is used to keep the thread structure around so it can + * be waited on after termination. @sa RTThreadWait and + * RTThreadWaitNoResume. Not required for RTThreadUserWait and friends! + */ + RTTHREADFLAGS_WAITABLE = RT_BIT(0), + /** The bit number corresponding to the RTTHREADFLAGS_WAITABLE mask. */ + RTTHREADFLAGS_WAITABLE_BIT = 0, + + /** Mask of valid flags, use for validation. */ + RTTHREADFLAGS_MASK = RT_BIT(0) +} RTTHREADFLAGS; + + +/** + * Create a new thread. + * + * @returns iprt status code. + * @param pThread Where to store the thread handle to the new thread. (optional) + * @param pfnThread The thread function. + * @param pvUser User argument. + * @param cbStack The size of the stack for the new thread. + * Use 0 for the default stack size. + * @param enmType The thread type. Used for deciding scheduling attributes + * of the thread. + * @param fFlags Flags of the RTTHREADFLAGS type (ORed together). + * @param pszName Thread name. + * + * @remark When called in Ring-0, this API will create a new kernel thread and not a thread in + * the context of the calling process. + */ +RTDECL(int) RTThreadCreate(PRTTHREAD pThread, PFNRTTHREAD pfnThread, void *pvUser, size_t cbStack, + RTTHREADTYPE enmType, unsigned fFlags, const char *pszName); +#ifndef RT_OS_LINUX /* XXX crashes genksyms at least on 32-bit Linux hosts */ +/** @copydoc RTThreadCreate */ +typedef DECLCALLBACKPTR(int, PFNRTTHREADCREATE)(PRTTHREAD pThread, PFNRTTHREAD pfnThread, void *pvUser, size_t cbStack, + RTTHREADTYPE enmType, unsigned fFlags, const char *pszName); +#endif + + +/** + * Create a new thread. + * + * Same as RTThreadCreate except the name is given in the RTStrPrintfV form. + * + * @returns iprt status code. + * @param pThread See RTThreadCreate. + * @param pfnThread See RTThreadCreate. + * @param pvUser See RTThreadCreate. + * @param cbStack See RTThreadCreate. + * @param enmType See RTThreadCreate. + * @param fFlags See RTThreadCreate. + * @param pszName Thread name format. + * @param va Format arguments. + */ +RTDECL(int) RTThreadCreateV(PRTTHREAD pThread, PFNRTTHREAD pfnThread, void *pvUser, size_t cbStack, + RTTHREADTYPE enmType, uint32_t fFlags, const char *pszNameFmt, va_list va) RT_IPRT_FORMAT_ATTR(7, 0); + +/** + * Create a new thread. + * + * Same as RTThreadCreate except the name is given in the RTStrPrintf form. + * + * @returns iprt status code. + * @param pThread See RTThreadCreate. + * @param pfnThread See RTThreadCreate. + * @param pvUser See RTThreadCreate. + * @param cbStack See RTThreadCreate. + * @param enmType See RTThreadCreate. + * @param fFlags See RTThreadCreate. + * @param pszName Thread name format. + * @param ... Format arguments. + */ +RTDECL(int) RTThreadCreateF(PRTTHREAD pThread, PFNRTTHREAD pfnThread, void *pvUser, size_t cbStack, + RTTHREADTYPE enmType, uint32_t fFlags, const char *pszNameFmt, ...) RT_IPRT_FORMAT_ATTR(7, 8); + +/** + * Gets the native thread id of a IPRT thread. + * + * @returns The native thread id. + * @param Thread The IPRT thread. + */ +RTDECL(RTNATIVETHREAD) RTThreadGetNative(RTTHREAD Thread); + +/** + * Gets the native thread handle for a IPRT thread. + * + * @returns The thread handle. INVALID_HANDLE_VALUE on failure. + * @param hThread The IPRT thread handle. + * + * @note Windows only. + * @note Only valid after parent returns from the thread creation call. + */ +RTDECL(uintptr_t) RTThreadGetNativeHandle(RTTHREAD hThread); + +/** + * Gets the IPRT thread of a native thread. + * + * @returns The IPRT thread handle + * @returns NIL_RTTHREAD if not a thread known to IPRT. + * @param NativeThread The native thread handle/id. + */ +RTDECL(RTTHREAD) RTThreadFromNative(RTNATIVETHREAD NativeThread); + +/** + * Changes the type of the specified thread. + * + * @returns iprt status code. + * @param Thread The thread which type should be changed. + * @param enmType The new thread type. + * @remark In Ring-0 it only works if Thread == RTThreadSelf(). + */ +RTDECL(int) RTThreadSetType(RTTHREAD Thread, RTTHREADTYPE enmType); + +/** + * Wait for the thread to terminate, resume on interruption. + * + * @returns iprt status code. + * Will not return VERR_INTERRUPTED. + * @param Thread The thread to wait for. + * @param cMillies The number of milliseconds to wait. Use RT_INDEFINITE_WAIT for + * an indefinite wait. + * @param prc Where to store the return code of the thread. Optional. + */ +RTDECL(int) RTThreadWait(RTTHREAD Thread, RTMSINTERVAL cMillies, int *prc); + +/** + * Wait for the thread to terminate, return on interruption. + * + * @returns iprt status code. + * @param Thread The thread to wait for. + * @param cMillies The number of milliseconds to wait. Use RT_INDEFINITE_WAIT for + * an indefinite wait. + * @param prc Where to store the return code of the thread. Optional. + */ +RTDECL(int) RTThreadWaitNoResume(RTTHREAD Thread, RTMSINTERVAL cMillies, int *prc); + +/** + * Gets the name of the current thread thread. + * + * @returns Pointer to readonly name string. + * @returns NULL on failure. + */ +RTDECL(const char *) RTThreadSelfName(void); + +/** + * Gets the name of a thread. + * + * @returns Pointer to readonly name string. + * @returns NULL on failure. + * @param Thread Thread handle of the thread to query the name of. + */ +RTDECL(const char *) RTThreadGetName(RTTHREAD Thread); + +/** + * Gets the type of the specified thread. + * + * @returns The thread type. + * @returns RTTHREADTYPE_INVALID if the thread handle is invalid. + * @param Thread The thread in question. + */ +RTDECL(RTTHREADTYPE) RTThreadGetType(RTTHREAD Thread); + +/** + * Sets the name of a thread. + * + * @returns iprt status code. + * @param Thread Thread handle of the thread to query the name of. + * @param pszName The thread name. + */ +RTDECL(int) RTThreadSetName(RTTHREAD Thread, const char *pszName); + +/** + * Checks if the specified thread is the main thread. + * + * @returns true if it is, false if it isn't. + * + * @param hThread The thread handle. + */ +RTDECL(bool) RTThreadIsMain(RTTHREAD hThread); + +/** + * Checks if the calling thread is known to IPRT. + * + * @returns @c true if it is, @c false if it isn't. + */ +RTDECL(bool) RTThreadIsSelfKnown(void); + +/** + * Checks if the calling thread is know to IPRT and is alive. + * + * @returns @c true if it is, @c false if it isn't. + */ +RTDECL(bool) RTThreadIsSelfAlive(void); + +/** + * Checks if the calling thread is known to IPRT. + * + * @returns @c true if it is, @c false if it isn't. + */ +RTDECL(bool) RTThreadIsOperational(void); + +/** + * Signal the user event. + * + * @returns iprt status code. + */ +RTDECL(int) RTThreadUserSignal(RTTHREAD Thread); + +/** + * Wait for the user event. + * + * @returns iprt status code. + * @param Thread The thread to wait for. + * @param cMillies The number of milliseconds to wait. Use RT_INDEFINITE_WAIT for + * an indefinite wait. + */ +RTDECL(int) RTThreadUserWait(RTTHREAD Thread, RTMSINTERVAL cMillies); + +/** + * Wait for the user event, return on interruption. + * + * @returns iprt status code. + * @param Thread The thread to wait for. + * @param cMillies The number of milliseconds to wait. Use RT_INDEFINITE_WAIT for + * an indefinite wait. + */ +RTDECL(int) RTThreadUserWaitNoResume(RTTHREAD Thread, RTMSINTERVAL cMillies); + +/** + * Reset the user event. + * + * @returns iprt status code. + * @param Thread The thread to reset. + */ +RTDECL(int) RTThreadUserReset(RTTHREAD Thread); + +/** + * Pokes the thread. + * + * This will wake up or/and signal the thread, attempting to interrupt whatever + * it's currently doing. + * + * The posixy version of this will send a signal to the thread, quite likely + * waking it up from normal sleeps, waits, and I/O. When IPRT is in + * non-obtrusive mode, the posixy version will definitely return + * VERR_NOT_IMPLEMENTED, and it may also do so if no usable signal was found. + * + * On Windows the thread will be alerted, waking it up from most sleeps and + * waits, but not probably very little in the I/O area (needs testing). On NT + * 3.50 and 3.1 VERR_NOT_IMPLEMENTED will be returned. + * + * @returns IPRT status code. + * + * @param hThread The thread to poke. This must not be the + * calling thread. + * + * @note This is *NOT* implemented on all platforms and may cause unresolved + * symbols during linking or VERR_NOT_IMPLEMENTED at runtime. + * + */ +RTDECL(int) RTThreadPoke(RTTHREAD hThread); + +# ifdef IN_RING0 + +/** + * Check if preemption is currently enabled or not for the current thread. + * + * @note This may return true even on systems where preemption isn't + * possible. In that case, it means no call to RTThreadPreemptDisable + * has been made and interrupts are still enabled. + * + * @returns true if preemption is enabled, false if preemetion is disabled. + * @param hThread Must be NIL_RTTHREAD for now. + */ +RTDECL(bool) RTThreadPreemptIsEnabled(RTTHREAD hThread); + +/** + * Check if preemption is pending for the current thread. + * + * This function should be called regularly when executing larger portions of + * code with preemption disabled. + * + * @returns true if pending, false if not. + * @param hThread Must be NIL_RTTHREAD for now. + * + * @note If called with interrupts disabled, the NT kernel may temporarily + * re-enable them while checking. + */ +RTDECL(bool) RTThreadPreemptIsPending(RTTHREAD hThread); + +/** + * Is RTThreadPreemptIsPending reliable? + * + * @returns true if reliable, false if not. + */ +RTDECL(bool) RTThreadPreemptIsPendingTrusty(void); + +/** + * Is preemption possible on this system. + * + * @returns true if possible, false if not. + */ +RTDECL(bool) RTThreadPreemptIsPossible(void); + +/** + * Preemption state saved by RTThreadPreemptDisable and used by + * RTThreadPreemptRestore to restore the previous state. + */ +typedef struct RTTHREADPREEMPTSTATE +{ + /** In debug builds this will be used to check for cpu migration. */ + RTCPUID idCpu; +# ifdef RT_OS_WINDOWS + /** The old IRQL. Don't touch! */ + unsigned char uchOldIrql; + /** Reserved, MBZ. */ + uint8_t bReserved1; + /** Reserved, MBZ. */ + uint8_t bReserved2; + /** Reserved, MBZ. */ + uint8_t bReserved3; +# define RTTHREADPREEMPTSTATE_INITIALIZER { NIL_RTCPUID, 255, 0, 0, 0 } +# elif defined(RT_OS_HAIKU) + /** The cpu_state. Don't touch! */ + uint32_t uOldCpuState; +# define RTTHREADPREEMPTSTATE_INITIALIZER { NIL_RTCPUID, 0 } +# elif defined(RT_OS_SOLARIS) + /** The Old PIL. Don't touch! */ + uint32_t uOldPil; +# define RTTHREADPREEMPTSTATE_INITIALIZER { NIL_RTCPUID, UINT32_MAX } +# else + /** Reserved, MBZ. */ + uint32_t u32Reserved; +# define RTTHREADPREEMPTSTATE_INITIALIZER { NIL_RTCPUID, 0 } +# endif +} RTTHREADPREEMPTSTATE; +/** Pointer to a preemption state. */ +typedef RTTHREADPREEMPTSTATE *PRTTHREADPREEMPTSTATE; + +/** + * Disable preemption. + * + * A call to this function must be matched by exactly one call to + * RTThreadPreemptRestore(). + * + * @param pState Where to store the preemption state. + */ +RTDECL(void) RTThreadPreemptDisable(PRTTHREADPREEMPTSTATE pState); + +/** + * Restores the preemption state, undoing a previous call to + * RTThreadPreemptDisable. + * + * A call to this function must be matching a previous call to + * RTThreadPreemptDisable. + * + * @param pState The state return by RTThreadPreemptDisable. + */ +RTDECL(void) RTThreadPreemptRestore(PRTTHREADPREEMPTSTATE pState); + +/** + * Check if the thread is executing in interrupt context. + * + * @returns true if in interrupt context, false if not. + * @param hThread Must be NIL_RTTHREAD for now. + */ +RTDECL(bool) RTThreadIsInInterrupt(RTTHREAD hThread); + + +/** + * Thread context swithcing events. + */ +typedef enum RTTHREADCTXEVENT +{ + /** This thread is being scheduled out on the current CPU (includes preemption, + * waiting, sleep and whatever else may trigger scheduling). */ + RTTHREADCTXEVENT_OUT = 0, + /** This thread is being scheduled in on the current CPU and will resume + * execution. */ + RTTHREADCTXEVENT_IN, + /** The usual 32-bit size hack. */ + RTTHREADCTXEVENT_32BIT_HACK = 0x7fffffff +} RTTHREADCTXEVENT; + +/** + * Thread context switching hook callback. + * + * This hook function is called when a thread is scheduled and preempted. Check + * @a enmEvent to see which it is. Since the function is being called from + * hooks inside the scheduler, it is limited what you can do from this function. + * Do NOT acquire locks, sleep or yield the thread for instance. IRQ safe + * spinlocks are fine though. + * + * @returns IPRT status code. + * @param enmEvent The thread-context event. Please quitely ignore unknown + * events, we may add more (thread exit, ++) later. + * @param pvUser User argument. + */ +typedef DECLCALLBACK(void) FNRTTHREADCTXHOOK(RTTHREADCTXEVENT enmEvent, void *pvUser); +/** Pointer to a context switching hook. */ +typedef FNRTTHREADCTXHOOK *PFNRTTHREADCTXHOOK; + +/** + * Initializes a thread context switching hook for the current thread. + * + * The hook is created as disabled, use RTThreadCtxHookEnable to enable it. + * + * @returns IPRT status code. + * @param phCtxHook Where to store the hook handle. + * @param fFlags Reserved for future extensions, must be zero. + * @param pfnCallback Pointer to a the hook function (callback) that + * should be called for all context switching events + * involving the current thread. + * @param pvUser User argument that will be passed to @a pfnCallback. + * @remarks Preemption must be enabled. + */ +RTDECL(int) RTThreadCtxHookCreate(PRTTHREADCTXHOOK phCtxHook, uint32_t fFlags, PFNRTTHREADCTXHOOK pfnCallback, void *pvUser); + +/** + * Destroys a thread context switching hook. + * + * Caller must make sure the hook is disabled before the final reference is + * released. Recommended to call this on the owning thread, otherwise the + * memory backing it may on some systems only be released when the thread + * terminates. + * + * @returns IPRT status code. + * + * @param hCtxHook The context hook handle. NIL_RTTHREADCTXHOOK is + * ignored and the function will return VINF_SUCCESS. + * @remarks Preemption must be enabled. + * @remarks Do not call from FNRTTHREADCTXHOOK. + */ +RTDECL(int) RTThreadCtxHookDestroy(RTTHREADCTXHOOK hCtxHook); + +/** + * Enables the context switching hooks for the current thread. + * + * @returns IPRT status code. + * @param hCtxHook The context hook handle. + * @remarks Should be called with preemption disabled. + */ +RTDECL(int) RTThreadCtxHookEnable(RTTHREADCTXHOOK hCtxHook); + +/** + * Disables the thread context switching hook for the current thread. + * + * Will not assert or fail if called twice or with a NIL handle. + * + * @returns IPRT status code. + * @param hCtxHook The context hook handle. NIL_RTTHREADCTXHOOK is + * ignored and the function wil return VINF_SUCCESS. + * @remarks Should be called with preemption disabled. + * @remarks Do not call from FNRTTHREADCTXHOOK. + */ +RTDECL(int) RTThreadCtxHookDisable(RTTHREADCTXHOOK hCtxHook); + +/** + * Is the thread context switching hook enabled? + * + * @returns true if registered, false if not supported or not registered. + * @param hCtxHook The context hook handle. NIL_RTTHREADCTXHOOK is + * ignored and the function will return false. + * + * @remarks Can be called from any thread, though is naturally subject to races + * when not called from the thread associated with the hook. + */ +RTDECL(bool) RTThreadCtxHookIsEnabled(RTTHREADCTXHOOK hCtxHook); + +# endif /* IN_RING0 */ + + +# ifdef IN_RING3 + +/** + * Adopts a non-IPRT thread. + * + * @returns IPRT status code. + * @param enmType The thread type. + * @param fFlags The thread flags. RTTHREADFLAGS_WAITABLE is not currently allowed. + * @param pszName The thread name. Optional + * @param pThread Where to store the thread handle. Optional. + */ +RTDECL(int) RTThreadAdopt(RTTHREADTYPE enmType, unsigned fFlags, const char *pszName, PRTTHREAD pThread); + +/** + * Get the thread handle of the current thread, automatically adopting alien + * threads. + * + * @returns Thread handle. + */ +RTDECL(RTTHREAD) RTThreadSelfAutoAdopt(void); + +/** + * Gets the affinity mask of the current thread. + * + * @returns IPRT status code. + * @param pCpuSet Where to return the CPU affienty set of the calling + * thread. + */ +RTR3DECL(int) RTThreadGetAffinity(PRTCPUSET pCpuSet); + +/** + * Sets the affinity mask of the current thread. + * + * @returns iprt status code. + * @param pCpuSet The set of CPUs this thread can run on. NULL means + * all CPUs. + */ +RTR3DECL(int) RTThreadSetAffinity(PCRTCPUSET pCpuSet); + +/** + * Binds the thread to one specific CPU. + * + * @returns iprt status code. + * @param idCpu The ID of the CPU to bind this thread to. Use + * NIL_RTCPUID to unbind it. + */ +RTR3DECL(int) RTThreadSetAffinityToCpu(RTCPUID idCpu); + +/** + * Unblocks a thread. + * + * This function is paired with RTThreadBlocking and RTThreadBlockingDebug. + * + * @param hThread The current thread. + * @param enmCurState The current state, used to check for nested blocking. + * The new state will be running. + */ +RTDECL(void) RTThreadUnblocked(RTTHREAD hThread, RTTHREADSTATE enmCurState); + +/** + * Change the thread state to blocking. + * + * @param hThread The current thread. + * @param enmState The sleep state. + * @param fReallySleeping Really going to sleep now. Use false before calls + * to other IPRT synchronization methods. + */ +RTDECL(void) RTThreadBlocking(RTTHREAD hThread, RTTHREADSTATE enmState, bool fReallySleeping); + +/** + * Get the current thread state. + * + * A thread that is reported as sleeping may actually still be running inside + * the lock validator or/and in the code of some other IPRT synchronization + * primitive. Use RTThreadGetReallySleeping + * + * @returns The thread state. + * @param hThread The thread. + */ +RTDECL(RTTHREADSTATE) RTThreadGetState(RTTHREAD hThread); + +/** + * Checks if the thread is really sleeping or not. + * + * @returns RTTHREADSTATE_RUNNING if not really sleeping, otherwise the state it + * is sleeping in. + * @param hThread The thread. + */ +RTDECL(RTTHREADSTATE) RTThreadGetReallySleeping(RTTHREAD hThread); + +/** + * Translate a thread state into a string. + * + * @returns Pointer to a read-only string containing the state name. + * @param enmState The state. + */ +RTDECL(const char *) RTThreadStateName(RTTHREADSTATE enmState); + + +/** + * Native thread states returned by RTThreadNativeState. + */ +typedef enum RTTHREADNATIVESTATE +{ + /** Invalid thread handle. */ + RTTHREADNATIVESTATE_INVALID = 0, + /** Unable to determine the thread state. */ + RTTHREADNATIVESTATE_UNKNOWN, + /** The thread is running. */ + RTTHREADNATIVESTATE_RUNNING, + /** The thread is blocked. */ + RTTHREADNATIVESTATE_BLOCKED, + /** The thread is suspended / stopped. */ + RTTHREADNATIVESTATE_SUSPENDED, + /** The thread has terminated. */ + RTTHREADNATIVESTATE_TERMINATED, + /** Make sure it's a 32-bit type. */ + RTTHREADNATIVESTATE_32BIT_HACK = 0x7fffffff +} RTTHREADNATIVESTATE; + + +/** + * Get the native state of a thread. + * + * @returns Native state. + * @param hThread The thread handle. + * + * @remarks Not yet implemented on all systems, so have a backup plan for + * RTTHREADNATIVESTATE_UNKNOWN. + */ +RTDECL(RTTHREADNATIVESTATE) RTThreadGetNativeState(RTTHREAD hThread); + + +/** + * Get the execution times of the specified thread + * + * @returns IPRT status code. + * @param pKernelTime Kernel execution time in ms (out) + * @param pUserTime User execution time in ms (out) + * + */ +RTR3DECL(int) RTThreadGetExecutionTimeMilli(uint64_t *pKernelTime, uint64_t *pUserTime); + +/** @name Thread Local Storage + * @{ + */ +/** + * Thread termination callback for destroying a non-zero TLS entry. + * + * @remarks It is not permitable to use any RTTls APIs at this time. Doing so + * may lead to endless loops, crashes, and other bad stuff. + * + * @param pvValue The current value. + */ +typedef DECLCALLBACK(void) FNRTTLSDTOR(void *pvValue); +/** Pointer to a FNRTTLSDTOR. */ +typedef FNRTTLSDTOR *PFNRTTLSDTOR; + +/** + * Allocates a TLS entry (index). + * + * Example code: + * @code + RTTLS g_iTls = NIL_RTTLS; + + ... + + // once for the process, allocate the TLS index + if (g_iTls == NIL_RTTLS) + g_iTls = RTTlsAlloc(); + + // set the thread-local value. + RTTlsSet(g_iTls, pMyData); + + ... + + // get the thread-local value + PMYDATA pMyData = (PMYDATA)RTTlsGet(g_iTls); + + @endcode + * + * @returns the index of the allocated TLS entry. + * @returns NIL_RTTLS on failure. + */ +RTR3DECL(RTTLS) RTTlsAlloc(void); + +/** + * Variant of RTTlsAlloc that returns a status code. + * + * @returns IPRT status code. + * @retval VERR_NOT_SUPPORTED if pfnDestructor is non-NULL and the platform + * doesn't support this feature. + * + * @param piTls Where to store the index of the allocated TLS entry. + * This is set to NIL_RTTLS on failure. + * @param pfnDestructor Optional callback function for cleaning up on + * thread termination. WARNING! This feature may not + * be implemented everywhere. + */ +RTR3DECL(int) RTTlsAllocEx(PRTTLS piTls, PFNRTTLSDTOR pfnDestructor); + +/** + * Frees a TLS entry. + * + * @returns IPRT status code. + * @param iTls The index of the TLS entry. + */ +RTR3DECL(int) RTTlsFree(RTTLS iTls); + +/** + * Get the (thread-local) value stored in a TLS entry. + * + * @returns value in given TLS entry. + * @retval NULL if RTTlsSet() has not yet been called on this thread, or if the + * TLS index is invalid. + * + * @param iTls The index of the TLS entry. + */ +RTR3DECL(void *) RTTlsGet(RTTLS iTls); + +/** + * Get the value stored in a TLS entry. + * + * @returns IPRT status code. + * @param iTls The index of the TLS entry. + * @param ppvValue Where to store the value. The value will be NULL if + * RTTlsSet has not yet been called on this thread. + */ +RTR3DECL(int) RTTlsGetEx(RTTLS iTls, void **ppvValue); + +/** + * Set the value stored in an allocated TLS entry. + * + * @returns IPRT status. + * @param iTls The index of the TLS entry. + * @param pvValue The value to store. + * + * @remarks Note that NULL is considered a special value. + */ +RTR3DECL(int) RTTlsSet(RTTLS iTls, void *pvValue); + +/** @} */ + +# endif /* IN_RING3 */ +# endif /* !IN_RC */ + +/** @} */ + +RT_C_DECLS_END + +#endif /* !IPRT_INCLUDED_thread_h */ + |