diff options
Diffstat (limited to '')
| -rw-r--r-- | src/VBox/ValidationKit/testboxscript/solaris/setup-routines.sh | 321 |
1 files changed, 321 insertions, 0 deletions
diff --git a/src/VBox/ValidationKit/testboxscript/solaris/setup-routines.sh b/src/VBox/ValidationKit/testboxscript/solaris/setup-routines.sh new file mode 100644 index 00000000..ea80b2de --- /dev/null +++ b/src/VBox/ValidationKit/testboxscript/solaris/setup-routines.sh @@ -0,0 +1,321 @@ +# $Id: setup-routines.sh $ +## @file +# VirtualBox Validation Kit - TestBoxScript Service Setup on Solaris. +# + +# +# Copyright (C) 2006-2019 Oracle Corporation +# +# This file is part of VirtualBox Open Source Edition (OSE), as +# available from http://www.virtualbox.org. This file is free software; +# you can redistribute it and/or modify it under the terms of the GNU +# General Public License (GPL) as published by the Free Software +# Foundation, in version 2 as it comes in the "COPYING" file of the +# VirtualBox OSE distribution. VirtualBox OSE is distributed in the +# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. +# +# The contents of this file may alternatively be used under the terms +# of the Common Development and Distribution License Version 1.0 +# (CDDL) only, as it comes in the "COPYING.CDDL" file of the +# VirtualBox OSE distribution, in which case the provisions of the +# CDDL are applicable instead of those of the GPL. +# +# You may elect to license modified versions of this file under the +# terms and conditions of either the GPL or the CDDL or both. +# + +# +# Detect solaris version. +# +MY_SOLARIS_VER=`uname -r` +case "${MY_SOLARIS_VER}" in + 5.10) MY_SOLARIS_VER=10;; + 5.11) MY_SOLARIS_VER=11;; + 5.12) MY_SOLARIS_VER=12;; + *) + echo "Your solaris version (${MY_SOLARIS_VER}) is not supported." >&2 + exit 1;; +esac + +# +# Overriding setup.sh bits. +# +MY_FGREP="/usr/xpg4/bin/fgrep" # The other one does grok -q. +if [ ! -f "${MY_ETC_SUDOERS}" ]; then # sudo isn't standard on S10. + if [ -f "/opt/csw/etc/sudoers" ]; then + MY_ETC_SUDOERS=/opt/csw/etc/sudoers + fi + if [ -f "/etc/opt/csw/sudoers" ]; then + MY_ETC_SUDOERS=/etc/opt/csw/sudoers + fi +fi + +# +# Solaris variables. +# +MY_SVC_TMP="/tmp/testboxscript.xml" +MY_SVC_FMRI="svc:/system/virtualbox/testboxscript" +MY_SVCCFG="/usr/sbin/svccfg" +MY_SVCADM="/usr/sbin/svcadm" +MY_TR="/usr/bin/tr" +MY_TAB=`printf "\t"` +if test "${MY_SOLARIS_VER}" -lt 11; then ## No gsed on S10?? ARG! + MY_SED="/usr/xpg4/bin/sed" +else + MY_SED="/usr/bin/gsed" +fi +if test "${MY_SOLARIS_VER}" -lt 11; then + MY_SCREEN="/opt/csw/bin/screen" +else + MY_SCREEN="screen" +fi + + +check_for_cifs() { + if [ ! -f /usr/kernel/fs/amd64/smbfs -a ! -f /usr/kernel/fs/smbfs -a "${MY_SOLARIS_VER}" -ge 11 ]; then + echo "error: smbfs client not installed?" >&2 + echo "Please install smbfs client support:" >&2 + echo " pkg install system/file-system/smb" >&2 + echo " svcadm enable svc:/system/idmap" >&2 + echo " svcadm enable svc:/network/smb/client" >&2 + echo " svcs svc:/system/idmap" >&2 + return 1; + fi + return 0; +} + +## +# Loads config values from the current installation. +# +os_load_config() { + # + # Adjust defaults. + # + # - Use NFS instead of CIFS because S10 doesn't have smbfs and S11 has + # problems getting the password. + # - Pass the PATH along so we'll find sudo and other stuff later. + # + TESTBOXSCRIPT_BUILDS_TYPE="nfs" + TESTBOXSCRIPT_TESTRSRC_TYPE="nfs" + TESTBOXSCRIPT_DEFAULT_BUILDS_TYPE="nfs" + TESTBOXSCRIPT_DEFAULT_TESTRSRC_TYPE="nfs" + TESTBOXSCRIPT_ENVVARS[${#TESTBOXSCRIPT_ENVVARS[@]}]="PATH=${PATH}"; + + # Load old current. + if "${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" > /dev/null 2>&1; then + # User. ASSUMES single quoted attribs. + MY_TMP=`"${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" \ + | ${MY_TR} '\n' ' ' \ + `; + MY_TMP=`echo "${MY_TMP} " \ + | ${MY_SED} \ + -e 's/> */> /g' \ + -e 's/ *\/>/ \/>/g' \ + -e 's/^.*<method_credential \([^>]*\) \/>.*$/\1/' \ + -e "s/^.*user='\([^']*\)'.*\$/\1/" \ + `; + if [ -n "${MY_TMP}" ]; then + TESTBOXSCRIPT_USER="${MY_TMP}"; + fi + + # Arguments. ASSUMES sub-elements. ASSUMES single quoted attribs. + XMLARGS=`"${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" \ + | ${MY_TR} '\n' ' ' \ + `; + case "${XMLARGS}" in + *exec_method*) + XMLARGS=`echo "${XMLARGS} " \ + | ${MY_SED} \ + -e 's/> */> /g' \ + -e 's/ *\/>/ \/>/g' \ + -e "s/^.*<exec_method \([^>]*\)name='start'\([^>]*\)>.*\$/\1 \2/" \ + -e "s/^.*exec='\([^']*\)'.*\$/\1/" \ + -e 's/"/"/g' \ + -e 's/</</g' \ + -e 's/>/>/g' \ + -e 's/&/&/g' \ + | ${MY_SED} \ + -e 's/^.*testboxscript -d -m *//' \ + `; + eval common_testboxscript_args_to_config ${XMLARGS} + ;; + *) + echo "error: ${MY_SVCCFG}" "export" "${MY_SVC_FMRI} contains no exec_method element." >&2 + echo " Please delete the service manually and restart setup.sh" >&2 + exit 2 + ;; + esac + fi +} + +## +# Adds one or more arguments to MY_ARGV after checking them for conformity. +# +os_add_args() { + while [ $# -gt 0 ]; + do + case "$1" in + *\ *) + echo "error: Space in option value is not allowed ($1)" >&2 + exit 1; + ;; + *${MY_TAB}*) + echo "error: Tab in option value is not allowed ($1)" >&2 + exit 1; + ;; + *\&*) + echo "error: Ampersand in option value is not allowed ($1)" >&2 + exit 1; + ;; + *\<*) + echo "error: Greater-than in option value is not allowed ($1)" >&2 + exit 1; + ;; + *\>*) + echo "error: Less-than in option value is not allowed ($1)" >&2 + exit 1; + ;; + *) + MY_ARGV="${MY_ARGV} $1"; + ;; + esac + shift; + done + return 0; +} + +## +# Installs, configures and starts the service. +# +os_install_service() { + # Only NFS for S10. + if [ "${MY_SOLARIS_VER}" -lt 11 ]; then + if [ "${TESTBOXSCRIPT_BUILDS_TYPE}" != "nfs" -o "${TESTBOXSCRIPT_TESTRSRC_TYPE}" != "nfs" ]; then + echo "On solaris 10 both share types must be 'nfs', cifs (smbfs) is not supported." >&2 + return 1; + fi + fi + + # Calc the command line. + MY_ARGV="" + common_compile_testboxscript_command_line + + # Create the service xml config file. + cat > "${MY_SVC_TMP}" <<EOF +<?xml version='1.0'?> +<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> +<service_bundle type='manifest' name='export'> + <service name='system/virtualbox/testboxscript' type='service' version='1'> + <create_default_instance enabled='false' /> + <single_instance/> + + <!-- Wait for the network to start up --> + <dependency name='milestone-network' grouping='require_all' restart_on='none' type='service'> + <service_fmri value='svc:/milestone/network:default' /> + </dependency> + + <!-- We wish to be started as late as possible... so go crazy with deps. --> + <dependency name='milestone-devices' grouping='require_all' restart_on='none' type='service'> + <service_fmri value='svc:/milestone/devices:default' /> + </dependency> + <dependency name='multi-user' grouping='require_all' restart_on='none' type='service'> + <service_fmri value='svc:/milestone/multi-user:default' /> + </dependency> + <dependency name='multi-user-server' grouping='require_all' restart_on='none' type='service'> + <service_fmri value='svc:/milestone/multi-user-server:default' /> + </dependency> + <dependency name='filesystem-local' grouping='require_all' restart_on='none' type='service'> + <service_fmri value='svc:/system/filesystem/local:default' /> + </dependency> + <dependency name='filesystem-autofs' grouping='require_all' restart_on='none' type='service'> + <service_fmri value='svc:/system/filesystem/autofs:default' /> + </dependency> +EOF + if [ "`uname -r`" = "5.10" ]; then # Seems to be gone in S11? + cat >> "${MY_SVC_TMP}" <<EOF + <dependency name='filesystem-volfs' grouping='require_all' restart_on='none' type='service'> + <service_fmri value='svc:/system/filesystem/volfs:default' /> + </dependency> +EOF + fi + cat >> "${MY_SVC_TMP}" <<EOF + <!-- start + stop methods --> + <exec_method type='method' name='start' exec='${MY_SCREEN} -S testboxscript -d -m ${MY_ARGV}' + timeout_seconds='30'> + <method_context working_directory='${TESTBOXSCRIPT_DIR}'> + <method_credential user='${TESTBOXSCRIPT_USER}' /> + <method_environment> + <envvar name='PATH' value='${PATH}' /> + </method_environment> + </method_context> + </exec_method> + + <exec_method type='method' name='stop' exec=':kill' timeout_seconds='60' /> + + <property_group name='startd' type='framework'> + <!-- sub-process core dumps/signals should not restart session --> + <propval name='ignore_error' type='astring' value='core,signal' /> + </property_group> + + <!-- Description --> + <template> + <common_name> + <loctext xml:lang='C'>VirtualBox TestBox Script</loctext> + </common_name> + </template> + </service> +</service_bundle> +EOF + + # Install the service, replacing old stuff. + if "${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" > /dev/null 2>&1; then + "${MY_SVCCFG}" "delete" "${MY_SVC_FMRI}" + fi + "${MY_SVCCFG}" "import" "${MY_SVC_TMP}" + rm -f "${MY_SVC_TMP}" + return 0; +} + +os_enable_service() { + "${MY_SVCADM}" "enable" "${MY_SVC_FMRI}" + return 0; +} + +os_disable_service() { + if "${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" > /dev/null 2>&1; then + "${MY_SVCADM}" "disable" "${MY_SVC_FMRI}" + sleep 1 + fi + return 0; +} + +os_add_user() { + useradd -m -s /usr/bin/bash -G staff "${TESTBOXSCRIPT_USER}" + passwd "${TESTBOXSCRIPT_USER}" # This sucker prompts, seemingly no way around that. + return 0; +} + + +maybe_hush_up_root_login() { + # We don't want /etc/profile to display /etc/motd, quotas and mail status + # every time we do sudo -i... It may screw up serious if we parse the + # output of the command we sudid. + > ~root/.hushlogin + return 0; +} + +os_final_message() { + cat <<EOF + +Additional things to do:" + 1. Configure NTP: + a) echo "server wei01-time.de.oracle.com" > /etc/inet/ntp.conf + echo "driftfile /var/ntp/ntp.drift" >> /etc/inet/ntp.conf + b) Enable the service: svcadm enable ntp + c) Sync once in case of big diff: ntpdate wei01-time.de.oracle.com + d) Check that it works: ntpq -p + +Enjoy! +EOF +} + |