From f8fe689a81f906d1b91bb3220acde2a4ecb14c5b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 05:01:46 +0200 Subject: Adding upstream version 6.0.4-dfsg. Signed-off-by: Daniel Baumann --- src/VBox/Runtime/include/internal/dbgmod.h | 723 +++++++++++++++++++++++++++++ 1 file changed, 723 insertions(+) create mode 100644 src/VBox/Runtime/include/internal/dbgmod.h (limited to 'src/VBox/Runtime/include/internal/dbgmod.h') diff --git a/src/VBox/Runtime/include/internal/dbgmod.h b/src/VBox/Runtime/include/internal/dbgmod.h new file mode 100644 index 00000000..de3bab8f --- /dev/null +++ b/src/VBox/Runtime/include/internal/dbgmod.h @@ -0,0 +1,723 @@ +/* $Id: dbgmod.h $ */ +/** @file + * IPRT - Internal Header for RTDbgMod and the associated interpreters. + */ + +/* + * Copyright (C) 2008-2019 Oracle Corporation + * + * This file is part of VirtualBox Open Source Edition (OSE), as + * available from http://www.virtualbox.org. This file is free software; + * you can redistribute it and/or modify it under the terms of the GNU + * General Public License (GPL) as published by the Free Software + * Foundation, in version 2 as it comes in the "COPYING" file of the + * VirtualBox OSE distribution. VirtualBox OSE is distributed in the + * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. + * + * The contents of this file may alternatively be used under the terms + * of the Common Development and Distribution License Version 1.0 + * (CDDL) only, as it comes in the "COPYING.CDDL" file of the + * VirtualBox OSE distribution, in which case the provisions of the + * CDDL are applicable instead of those of the GPL. + * + * You may elect to license modified versions of this file under the + * terms and conditions of either the GPL or the CDDL or both. + */ + +#ifndef IPRT_INCLUDED_INTERNAL_dbgmod_h +#define IPRT_INCLUDED_INTERNAL_dbgmod_h +#ifndef RT_WITHOUT_PRAGMA_ONCE +# pragma once +#endif + +#include +#include +#include /* for PFNRTLDRENUMDBG */ +#include "internal/magics.h" + +RT_C_DECLS_BEGIN + +/** @addtogroup grp_rt_dbgmod + * @internal + * @{ + */ + + +/** Pointer to the internal module structure. */ +typedef struct RTDBGMODINT *PRTDBGMODINT; + +/** + * Virtual method table for executable image interpreters. + */ +typedef struct RTDBGMODVTIMG +{ + /** Magic number (RTDBGMODVTIMG_MAGIC). */ + uint32_t u32Magic; + /** Reserved. */ + uint32_t fReserved; + /** The name of the interpreter. */ + const char *pszName; + + /** + * Try open the image. + * + * This combines probing and opening. + * + * @returns IPRT status code. No informational returns defined. + * + * @param pMod Pointer to the module that is being opened. + * + * The RTDBGMOD::pszDbgFile member will point to + * the filename of any debug info we're aware of + * on input. Also, or alternatively, it is expected + * that the interpreter will look for debug info in + * the executable image file when present and that it + * may ask the image interpreter for this when it's + * around. + * + * Upon successful return the method is expected to + * initialize pImgOps and pvImgPriv. + * @param enmArch The desired architecture. + */ + DECLCALLBACKMEMBER(int, pfnTryOpen)(PRTDBGMODINT pMod, RTLDRARCH enmArch); + + /** + * Close the interpreter, freeing all associated resources. + * + * The caller sets the pDbgOps and pvDbgPriv RTDBGMOD members + * to NULL upon return. + * + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(int, pfnClose)(PRTDBGMODINT pMod); + + /** + * Enumerate the debug info contained in the executable image. + * + * Identical to RTLdrEnumDbgInfo. + * + * @returns IPRT status code or whatever pfnCallback returns. + * + * @param pMod Pointer to the module structure. + * @param pfnCallback The callback function. Ignore the module + * handle argument! + * @param pvUser The user argument. + */ + DECLCALLBACKMEMBER(int, pfnEnumDbgInfo)(PRTDBGMODINT pMod, PFNRTLDRENUMDBG pfnCallback, void *pvUser); + + /** + * Enumerate the segments in the executable image. + * + * Identical to RTLdrEnumSegments. + * + * @returns IPRT status code or whatever pfnCallback returns. + * + * @param pMod Pointer to the module structure. + * @param pfnCallback The callback function. Ignore the module + * handle argument! + * @param pvUser The user argument. + */ + DECLCALLBACKMEMBER(int, pfnEnumSegments)(PRTDBGMODINT pMod, PFNRTLDRENUMSEGS pfnCallback, void *pvUser); + + /** + * Enumerates the symbols exported by the module. + * + * @returns iprt status code, which might have been returned by pfnCallback. + * @param pMod Pointer to the module structure. + * @param fFlags Flags indicating what to return and such. + * @param BaseAddress The image base addressto use when calculating the + * symbol values. + * @param pfnCallback The callback function which each symbol is to be fed + * to. + * @param pvUser User argument to pass to the enumerator. + */ + DECLCALLBACKMEMBER(int, pfnEnumSymbols)(PRTDBGMODINT pMod, uint32_t fFlags, RTLDRADDR BaseAddress, + PFNRTLDRENUMSYMS pfnCallback, void *pvUser); + + /** + * Gets the size of the loaded image. + * + * Identical to RTLdrSize. + * + * @returns The size in bytes, RTUINTPTR_MAX on failure. + * + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(RTUINTPTR, pfnImageSize)(PRTDBGMODINT pMod); + + /** + * Converts a link address to a segment:offset address (RVA included). + * + * @returns IPRT status code. + * + * @param pMod Pointer to the module structure. + * @param LinkAddress The link address to convert. + * @param piSeg The segment index. + * @param poffSeg Where to return the segment offset. + */ + DECLCALLBACKMEMBER(int, pfnLinkAddressToSegOffset)(PRTDBGMODINT pMod, RTLDRADDR LinkAddress, + PRTDBGSEGIDX piSeg, PRTLDRADDR poffSeg); + + /** + * Converts an image relative virtual address to a segment:offset. + * + * @returns IPRT status code. + * + * @param pMod Pointer to the loader module structure. + * @param Rva The RVA to convert. + * @param piSeg The segment index. + * @param poffSeg Where to return the segment offset. + */ + DECLCALLBACKMEMBER(int, pfnRvaToSegOffset)(PRTDBGMODINT pMod, RTLDRADDR Rva, uint32_t *piSeg, PRTLDRADDR poffSeg); + + /** + * Creates a read-only mapping of a part of the image file. + * + * @returns IPRT status code and *ppvMap set on success. + * + * @param pMod Pointer to the module structure. + * @param iDbgInfo The debug info ordinal number if the request + * corresponds exactly to a debug info part from + * pfnEnumDbgInfo. Otherwise, pass UINT32_MAX. + * @param off The offset into the image file. + * @param cb The number of bytes to map. + * @param ppvMap Where to return the mapping address on success. + * + * @remarks Fixups will only be applied if @a iDbgInfo is specified. + */ + DECLCALLBACKMEMBER(int, pfnMapPart)(PRTDBGMODINT pMod, uint32_t iDbgInfo, RTFOFF off, size_t cb, void const **ppvMap); + + /** + * Unmaps memory previously mapped by pfnMapPart. + * + * @returns IPRT status code, *ppvMap set to NULL on success. + * + * @param pMod Pointer to the module structure. + * @param cb The size of the mapping. + * @param ppvMap The mapping address on input, NULL on + * successful return. + */ + DECLCALLBACKMEMBER(int, pfnUnmapPart)(PRTDBGMODINT pMod, size_t cb, void const **ppvMap); + + /** + * Reads data from the image file. + * + * @returns IPRT status code, *ppvMap set to NULL on success. + * + * @param pMod Pointer to the module structure. + * @param iDbgInfoHint The debug info ordinal number hint, pass UINT32_MAX + * if not know or sure. + * @param off The offset into the image file. + * @param pvBuf The buffer to read into. + * @param cb The number of bytes to read. + */ + DECLCALLBACKMEMBER(int, pfnReadAt)(PRTDBGMODINT pMod, uint32_t iDbgInfoHint, RTFOFF off, void *pvBuf, size_t cb); + + /** + * Gets the image format. + * + * @returns Valid image format on success, RTLDRFMT_INVALID if not supported. + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(RTLDRFMT, pfnGetFormat)(PRTDBGMODINT pMod); + + /** + * Gets the image architecture. + * + * @returns Valid image architecutre on success, RTLDRARCH_WHATEVER if not + * supported. + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(RTLDRARCH, pfnGetArch)(PRTDBGMODINT pMod); + + /** + * Generic method for querying image properties. + * + * @returns IPRT status code. + * @param pMod Pointer to the module structure. + * @param enmProp The property to query. + * @param pvBuf Pointer to the return buffer. + * @param cbBuf The size of the return buffer. + * @param pcbRet How many bytes was actually returned. In the + * case of VERR_BUFFER_OVERFLOW this will contain + * the required buffer size. Optional. + * @sa RTLdrQueryPropEx + */ + DECLCALLBACKMEMBER(int, pfnQueryProp)(PRTDBGMODINT pMod, RTLDRPROP enmProp, void *pvBuf, size_t cbBuf, size_t *pcbRet); + + /** + * Try use unwind information to unwind one frame. + * + * @returns IPRT status code. Last informational status from stack reader callback. + * @retval VERR_DBG_NO_UNWIND_INFO if the module contains no unwind information. + * @retval VERR_DBG_UNWIND_INFO_NOT_FOUND if no unwind information was found + * for the location given by iSeg:off. + * + * @param pMod Pointer to the module structure. + * @param iSeg The segment number of the program counter. + * @param off The offset into @a iSeg. Together with @a iSeg + * this corresponds to the RTDBGUNWINDSTATE::uPc + * value pointed to by @a pState. + * @param pState The unwind state to work. + * + * @sa RTLdrUnwindFrame, RTDbgModUnwindFrame + */ + DECLCALLBACKMEMBER(int, pfnUnwindFrame)(PRTDBGMODINT pMod, RTDBGSEGIDX iSeg, RTUINTPTR off, PRTDBGUNWINDSTATE pState); + + /** For catching initialization errors (RTDBGMODVTIMG_MAGIC). */ + uint32_t u32EndMagic; +} RTDBGMODVTIMG; +/** Pointer to a const RTDBGMODVTIMG. */ +typedef RTDBGMODVTIMG const *PCRTDBGMODVTIMG; + + +/** + * Virtual method table for debug info interpreters. + */ +typedef struct RTDBGMODVTDBG +{ + /** Magic number (RTDBGMODVTDBG_MAGIC). */ + uint32_t u32Magic; + /** Mask of supported debug info types, see grp_rt_dbg_type. + * Used to speed up the search for a suitable interpreter. */ + uint32_t fSupports; + /** The name of the interpreter. */ + const char *pszName; + + /** + * Try open the image. + * + * This combines probing and opening. + * + * @returns IPRT status code. No informational returns defined. + * + * @param pMod Pointer to the module that is being opened. + * + * The RTDBGMOD::pszDbgFile member will point to + * the filename of any debug info we're aware of + * on input. Also, or alternatively, it is expected + * that the interpreter will look for debug info in + * the executable image file when present and that it + * may ask the image interpreter for this when it's + * around. + * + * Upon successful return the method is expected to + * initialize pDbgOps and pvDbgPriv. + * @param enmArch The desired architecture. + */ + DECLCALLBACKMEMBER(int, pfnTryOpen)(PRTDBGMODINT pMod, RTLDRARCH enmArch); + + /** + * Close the interpreter, freeing all associated resources. + * + * The caller sets the pDbgOps and pvDbgPriv RTDBGMOD members + * to NULL upon return. + * + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(int, pfnClose)(PRTDBGMODINT pMod); + + + + /** + * Converts an image relative virtual address address to a segmented address. + * + * @returns Segment index on success, NIL_RTDBGSEGIDX on failure. + * @param pMod Pointer to the module structure. + * @param uRva The image relative address to convert. + * @param poffSeg Where to return the segment offset. Optional. + */ + DECLCALLBACKMEMBER(RTDBGSEGIDX, pfnRvaToSegOff)(PRTDBGMODINT pMod, RTUINTPTR uRva, PRTUINTPTR poffSeg); + + /** + * Image size when mapped if segments are mapped adjacently. + * + * For ELF, PE, and Mach-O images this is (usually) a natural query, for LX and + * NE and such it's a bit odder and the answer may not make much sense for them. + * + * @returns Image mapped size. + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(RTUINTPTR, pfnImageSize)(PRTDBGMODINT pMod); + + + + /** + * Adds a segment to the module (optional). + * + * @returns IPRT status code. + * @retval VERR_NOT_SUPPORTED if the interpreter doesn't support this feature. + * @retval VERR_DBG_SEGMENT_INDEX_CONFLICT if the segment index exists already. + * + * @param pMod Pointer to the module structure. + * @param uRva The segment image relative address. + * @param cb The segment size. + * @param pszName The segment name. + * @param cchName The length of the segment name. + * @param fFlags Segment flags. + * @param piSeg The segment index or NIL_RTDBGSEGIDX on input. + * The assigned segment index on successful return. + * Optional. + */ + DECLCALLBACKMEMBER(int, pfnSegmentAdd)(PRTDBGMODINT pMod, RTUINTPTR uRva, RTUINTPTR cb, const char *pszName, size_t cchName, + uint32_t fFlags, PRTDBGSEGIDX piSeg); + + /** + * Gets the segment count. + * + * @returns Number of segments. + * @retval NIL_RTDBGSEGIDX if unknown. + * + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(RTDBGSEGIDX, pfnSegmentCount)(PRTDBGMODINT pMod); + + /** + * Gets information about a segment. + * + * @returns IPRT status code. + * @retval VERR_DBG_INVALID_SEGMENT_INDEX if iSeg is too high. + * + * @param pMod Pointer to the module structure. + * @param iSeg The segment. + * @param pSegInfo Where to store the segment information. + */ + DECLCALLBACKMEMBER(int, pfnSegmentByIndex)(PRTDBGMODINT pMod, RTDBGSEGIDX iSeg, PRTDBGSEGMENT pSegInfo); + + + + /** + * Adds a symbol to the module (optional). + * + * @returns IPRT code. + * @retval VERR_NOT_SUPPORTED if the interpreter doesn't support this feature. + * + * @param pMod Pointer to the module structure. + * @param pszSymbol The symbol name. + * @param cchSymbol The length for the symbol name. + * @param iSeg The segment number (0-based). RTDBGMOD_SEG_RVA can be used. + * @param off The offset into the segment. + * @param cb The area covered by the symbol. 0 is fine. + * @param fFlags Flags. + * @param piOrdinal Where to return the symbol ordinal on success. If the + * interpreter doesn't do ordinals, this will be set to + * UINT32_MAX. Optional + */ + DECLCALLBACKMEMBER(int, pfnSymbolAdd)(PRTDBGMODINT pMod, const char *pszSymbol, size_t cchSymbol, + uint32_t iSeg, RTUINTPTR off, RTUINTPTR cb, uint32_t fFlags, + uint32_t *piOrdinal); + + /** + * Gets the number of symbols in the module. + * + * This is used for figuring out the max value to pass to pfnSymbolByIndex among + * other things. + * + * @returns The number of symbols, UINT32_MAX if not known/supported. + * + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(uint32_t, pfnSymbolCount)(PRTDBGMODINT pMod); + + /** + * Queries symbol information by ordinal number. + * + * @returns IPRT status code. + * @retval VINF_SUCCESS on success, no informational status code. + * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. + * @retval VERR_NOT_SUPPORTED if lookup by ordinal is not supported. + * @retval VERR_SYMBOL_NOT_FOUND if there is no symbol at that index. + * + * @param pMod Pointer to the module structure. + * @param iOrdinal The symbol ordinal number. + * @param pSymInfo Where to store the symbol information. + */ + DECLCALLBACKMEMBER(int, pfnSymbolByOrdinal)(PRTDBGMODINT pMod, uint32_t iOrdinal, PRTDBGSYMBOL pSymInfo); + + /** + * Queries symbol information by symbol name. + * + * @returns IPRT status code. + * @retval VINF_SUCCESS on success, no informational status code. + * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. + * @retval VERR_SYMBOL_NOT_FOUND if no suitable symbol was found. + * + * @param pMod Pointer to the module structure. + * @param pszSymbol The symbol name. + * @param cchSymbol The length of the symbol name. + * @param pSymInfo Where to store the symbol information. + */ + DECLCALLBACKMEMBER(int, pfnSymbolByName)(PRTDBGMODINT pMod, const char *pszSymbol, size_t cchSymbol, PRTDBGSYMBOL pSymInfo); + + /** + * Queries symbol information by address. + * + * The returned symbol is what the debug info interpreter considers the symbol + * most applicable to the specified address. This usually means a symbol with an + * address equal or lower than the requested. + * + * @returns IPRT status code. + * @retval VINF_SUCCESS on success, no informational status code. + * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. + * @retval VERR_SYMBOL_NOT_FOUND if no suitable symbol was found. + * + * @param pMod Pointer to the module structure. + * @param iSeg The segment number (0-based) or RTDBGSEGIDX_ABS. + * @param off The offset into the segment. + * @param fFlags Symbol search flags, see RTDBGSYMADDR_FLAGS_XXX. + * @param poffDisp Where to store the distance between the specified address + * and the returned symbol. Optional. + * @param pSymInfo Where to store the symbol information. + */ + DECLCALLBACKMEMBER(int, pfnSymbolByAddr)(PRTDBGMODINT pMod, uint32_t iSeg, RTUINTPTR off, uint32_t fFlags, + PRTINTPTR poffDisp, PRTDBGSYMBOL pSymInfo); + + + + /** + * Adds a line number to the module (optional). + * + * @returns IPRT status code. + * @retval VERR_NOT_SUPPORTED if the interpreter doesn't support this feature. + * + * @param pMod Pointer to the module structure. + * @param pszFile The filename. + * @param cchFile The length of the filename. + * @param uLineNo The line number. + * @param iSeg The segment number (0-based). + * @param off The offset into the segment. + * @param piOrdinal Where to return the line number ordinal on success. If + * the interpreter doesn't do ordinals, this will be set to + * UINT32_MAX. Optional + */ + DECLCALLBACKMEMBER(int, pfnLineAdd)(PRTDBGMODINT pMod, const char *pszFile, size_t cchFile, uint32_t uLineNo, + uint32_t iSeg, RTUINTPTR off, uint32_t *piOrdinal); + + /** + * Gets the number of line numbers in the module. + * + * @returns The number or UINT32_MAX if not known/supported. + * + * @param pMod Pointer to the module structure. + */ + DECLCALLBACKMEMBER(uint32_t, pfnLineCount)(PRTDBGMODINT pMod); + + /** + * Queries line number information by ordinal number. + * + * @returns IPRT status code. + * @retval VINF_SUCCESS on success, no informational status code. + * @retval VERR_DBG_NO_LINE_NUMBERS if there aren't any line numbers. + * @retval VERR_DBG_LINE_NOT_FOUND if there is no line number with that + * ordinal. + * + * @param pMod Pointer to the module structure. + * @param iOrdinal The line number ordinal number. + * @param pLineInfo Where to store the information about the line number. + */ + DECLCALLBACKMEMBER(int, pfnLineByOrdinal)(PRTDBGMODINT pMod, uint32_t iOrdinal, PRTDBGLINE pLineInfo); + + /** + * Queries line number information by address. + * + * @returns IPRT status code. + * @retval VINF_SUCCESS on success, no informational status code. + * @retval VERR_DBG_NO_LINE_NUMBERS if there aren't any line numbers. + * @retval VERR_DBG_LINE_NOT_FOUND if no suitable line number was found. + * + * @param pMod Pointer to the module structure. + * @param iSeg The segment number (0-based) or RTDBGSEGIDX_ABS. + * @param off The offset into the segment. + * @param poffDisp Where to store the distance between the specified address + * and the returned line number. Optional. + * @param pLineInfo Where to store the information about the closest line + * number. + */ + DECLCALLBACKMEMBER(int, pfnLineByAddr)(PRTDBGMODINT pMod, uint32_t iSeg, RTUINTPTR off, + PRTINTPTR poffDisp, PRTDBGLINE pLineInfo); + + /** + * Try use unwind information to unwind one frame. + * + * @returns IPRT status code. Last informational status from stack reader callback. + * @retval VERR_DBG_NO_UNWIND_INFO if the module contains no unwind information. + * @retval VERR_DBG_UNWIND_INFO_NOT_FOUND if no unwind information was found + * for the location given by iSeg:off. + * + * @param pMod Pointer to the module structure. + * @param iSeg The segment number of the program counter. + * @param off The offset into @a iSeg. Together with @a iSeg + * this corresponds to the RTDBGUNWINDSTATE::uPc + * value pointed to by @a pState. + * @param pState The unwind state to work. + * + * @sa RTDbgModUnwindFrame + */ + DECLCALLBACKMEMBER(int, pfnUnwindFrame)(PRTDBGMODINT pMod, RTDBGSEGIDX iSeg, RTUINTPTR off, PRTDBGUNWINDSTATE pState); + + /** For catching initialization errors (RTDBGMODVTDBG_MAGIC). */ + uint32_t u32EndMagic; +} RTDBGMODVTDBG; +/** Pointer to a const RTDBGMODVTDBG. */ +typedef RTDBGMODVTDBG const *PCRTDBGMODVTDBG; + + +/** + * Deferred loading callback. + * + * @returns IPRT status code. On success the necessary method tables should be + * installed in @a pMod. + * @param pDbgMod Pointer to the debug module structure. + * @param pDeferred The deferred load data. + */ +typedef DECLCALLBACK(int) FNRTDBGMODDEFERRED(PRTDBGMODINT pDbgMod, struct RTDBGMODDEFERRED *pDeferred); +/** Pointer to a deferred loading callback. */ +typedef FNRTDBGMODDEFERRED *PFNRTDBGMODDEFERRED; + + +/** + * Structure pointed to by pvDbgPriv and/or pvImgPriv when + * g_rtDbgModVtDbgDeferred and/or g_rtDbgModVtImgDeferred are being used. + */ +typedef struct RTDBGMODDEFERRED +{ + /** Magic value (RTDBGMODDEFERRED_MAGIC). */ + uint32_t u32Magic; + /** Reference counter. */ + uint32_t volatile cRefs; + /** The image size. + * Deferred loading is almost pointless without knowing the module size, as + * it cannot be mapped (correctly) without it. */ + RTUINTPTR cbImage; + /** The configuration instance (referenced), can be NIL. */ + RTDBGCFG hDbgCfg; + /** Performs deferred loading of the module. */ + PFNRTDBGMODDEFERRED pfnDeferred; + /** Callback specific data. */ + union + { + struct + { + /** The time/date stamp of the executable image and codeview file. */ + uint32_t uTimestamp; + } PeImage, + OldCodeView; + + struct + { + /** The PDB uuid. */ + RTUUID Uuid; + /** The PDB age. */ + uint32_t uAge; + } NewCodeview; + + struct + { + /** The CRC-32 value found in the .gnu_debuglink section. */ + uint32_t uCrc32; + } GnuDebugLink; + + struct + { + /** The image UUID. */ + RTUUID Uuid; + /** Image architecture. */ + RTLDRARCH enmArch; + /** Number of segment mappings. */ + uint32_t cSegs; + /** Segment mappings. */ + RTDBGSEGMENT aSegs[1]; + } MachO; + } u; +} RTDBGMODDEFERRED; +/** Pointer to the deferred loading data. */ +typedef RTDBGMODDEFERRED *PRTDBGMODDEFERRED; + + +/** + * Debug module structure. + */ +typedef struct RTDBGMODINT +{ + /** Magic value (RTDBGMOD_MAGIC). */ + uint32_t u32Magic; + /** The number of reference there are to this module. + * This is used to perform automatic cleanup and sharing. */ + uint32_t volatile cRefs; + /** The module tag. */ + uint64_t uTag; + + /** When set, the loading of the image and debug info (including locating any + * external files), will not have taken place yet. */ + uint32_t fDeferred : 1; + /** Set if deferred loading failed. */ + uint32_t fDeferredFailed : 1; + /** Set if the debug info is based on image exports and segments. */ + uint32_t fExports : 1; + /** Alignment padding. */ + uint32_t fPadding1 : 29; +#if ARCH_BITS == 64 + uint32_t u32Padding2; +#endif + + /** The module name (short). */ + char const *pszName; + /** The image file specified by the user. Can be NULL. */ + char const *pszImgFileSpecified; + /** The module filename. Can be NULL. */ + char const *pszImgFile; + /** The debug info file (if external). Can be NULL. */ + char const *pszDbgFile; + + /** The method table for the executable image interpreter. */ + PCRTDBGMODVTIMG pImgVt; + /** Pointer to the private data of the executable image interpreter. */ + void *pvImgPriv; + + /** The method table for the debug info interpreter. */ + PCRTDBGMODVTDBG pDbgVt; + /** Pointer to the private data of the debug info interpreter. */ + void *pvDbgPriv; + + /** Critical section serializing access to the module. */ + RTCRITSECT CritSect; +} RTDBGMODINT; +/** Pointer to an debug module structure. */ +typedef RTDBGMODINT *PRTDBGMODINT; + + +extern DECLHIDDEN(RTSTRCACHE) g_hDbgModStrCache; +extern DECLHIDDEN(RTDBGMODVTDBG const) g_rtDbgModVtDbgCodeView; +extern DECLHIDDEN(RTDBGMODVTDBG const) g_rtDbgModVtDbgDwarf; +extern DECLHIDDEN(RTDBGMODVTDBG const) g_rtDbgModVtDbgNm; +extern DECLHIDDEN(RTDBGMODVTDBG const) g_rtDbgModVtDbgMapSym; +#ifdef RT_OS_WINDOWS +extern DECLHIDDEN(RTDBGMODVTDBG const) g_rtDbgModVtDbgDbgHelp; +#endif +extern DECLHIDDEN(RTDBGMODVTDBG const) g_rtDbgModVtDbgDeferred; +extern DECLHIDDEN(RTDBGMODVTDBG const) g_rtDbgModVtDbgContainer; + +extern DECLHIDDEN(RTDBGMODVTIMG const) g_rtDbgModVtImgLdr; +extern DECLHIDDEN(RTDBGMODVTIMG const) g_rtDbgModVtImgDeferred; + +DECLHIDDEN(int) rtDbgModContainerCreate(PRTDBGMODINT pMod, RTUINTPTR cbSeg); +DECLHIDDEN(int) rtDbgModContainer_SymbolRemoveAll(PRTDBGMODINT pMod); +DECLHIDDEN(int) rtDbgModContainer_LineRemoveAll(PRTDBGMODINT pMod); +DECLHIDDEN(int) rtDbgModContainer_RemoveAll(PRTDBGMODINT pMod); + +DECLHIDDEN(int) rtDbgModCreateForExports(PRTDBGMODINT pDbgMod); +DECLHIDDEN(int) rtDbgModDeferredCreate(PRTDBGMODINT pDbgMod, PFNRTDBGMODDEFERRED pfnDeferred, RTUINTPTR cbImage, + RTDBGCFG hDbgCfg, size_t cbDeferred, PRTDBGMODDEFERRED *ppDeferred); + +DECLHIDDEN(int) rtDbgModLdrOpenFromHandle(PRTDBGMODINT pDbgMod, RTLDRMOD hLdrMod); + +DECLHIDDEN(int) rtDwarfUnwind_EhData(void const *pvSection, size_t cbSection, RTUINTPTR uRvaSection, + RTDBGSEGIDX idxSeg, RTUINTPTR offSeg, RTUINTPTR uRva, + PRTDBGUNWINDSTATE pState, RTLDRARCH enmArch); + +/** @} */ + +RT_C_DECLS_END + +#endif /* !IPRT_INCLUDED_INTERNAL_dbgmod_h */ + -- cgit v1.2.3