/* $Id: sched-posix.cpp $ */ /** @file * IPRT - Scheduling, POSIX. */ /* * Copyright (C) 2006-2019 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ /* * !WARNING! * * When talking about lowering and raising priority, we do *NOT* refer to * the common direction priority values takes on unix systems (lower means * higher). So, when we raise the priority of a linux thread the nice * value will decrease, and when we lower the priority the nice value * will increase. Confusing, right? * * !WARNING! */ /** @def THREAD_LOGGING * Be very careful with enabling this, it may cause deadlocks when combined * with the 'thread' logging prefix. */ #ifdef DOXYGEN_RUNNING #define THREAD_LOGGING #endif /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP RTLOGGROUP_THREAD #include #include #include #include #include #include #include #include #include #include #include #include #include "internal/sched.h" #include "internal/thread.h" /********************************************************************************************************************************* * Structures and Typedefs * *********************************************************************************************************************************/ /** Array scheduler attributes corresponding to each of the thread types. */ typedef struct PROCPRIORITYTYPE { /** For sanity include the array index. */ RTTHREADTYPE enmType; /** The thread priority or nice delta - depends on which priority type. */ int iPriority; } PROCPRIORITYTYPE; /** * Configuration of one priority. */ typedef struct { /** The priority. */ RTPROCPRIORITY enmPriority; /** The name of this priority. */ const char *pszName; /** The process nice value. */ int iNice; /** The delta applied to the iPriority value. */ int iDelta; /** Array scheduler attributes corresponding to each of the thread types. */ const PROCPRIORITYTYPE *paTypes; } PROCPRIORITY; /** * Saved priority settings */ typedef struct { /** Process priority. */ int iPriority; /** Process level. */ struct sched_param SchedParam; /** Process level. */ int iPolicy; /** pthread level. */ struct sched_param PthreadSchedParam; /** pthread level. */ int iPthreadPolicy; } SAVEDPRIORITY, *PSAVEDPRIORITY; /********************************************************************************************************************************* * Global Variables * *********************************************************************************************************************************/ /** * Thread level priorities based on a 0..31 priority range * as specified as the minimum for SCHED_RR/FIFO. FreeBSD * seems to be using this (needs more research to be * certain). */ static const PROCPRIORITYTYPE g_aTypesThread[RTTHREADTYPE_END] = { { RTTHREADTYPE_INVALID, -999999999 }, { RTTHREADTYPE_INFREQUENT_POLLER, 5 }, { RTTHREADTYPE_MAIN_HEAVY_WORKER, 12 }, { RTTHREADTYPE_EMULATION, 14 }, { RTTHREADTYPE_DEFAULT, 15 }, { RTTHREADTYPE_GUI, 16 }, { RTTHREADTYPE_MAIN_WORKER, 18 }, { RTTHREADTYPE_VRDP_IO, 24 }, { RTTHREADTYPE_DEBUGGER, 28 }, { RTTHREADTYPE_MSG_PUMP, 29 }, { RTTHREADTYPE_IO, 30 }, { RTTHREADTYPE_TIMER, 31 } }; static const PROCPRIORITYTYPE g_aTypesThreadFlat[RTTHREADTYPE_END] = { { RTTHREADTYPE_INVALID, ~0 }, { RTTHREADTYPE_INFREQUENT_POLLER, 15 }, { RTTHREADTYPE_MAIN_HEAVY_WORKER, 15 }, { RTTHREADTYPE_EMULATION, 15 }, { RTTHREADTYPE_DEFAULT, 15 }, { RTTHREADTYPE_GUI, 15 }, { RTTHREADTYPE_MAIN_WORKER, 15 }, { RTTHREADTYPE_VRDP_IO, 15 }, { RTTHREADTYPE_DEBUGGER, 15 }, { RTTHREADTYPE_MSG_PUMP, 15 }, { RTTHREADTYPE_IO, 15 }, { RTTHREADTYPE_TIMER, 15 } }; /** * Process and thread level priority, full access at thread level. */ static const PROCPRIORITY g_aProcessAndThread[] = { { RTPROCPRIORITY_FLAT, "Flat", 0, 0, g_aTypesThreadFlat }, { RTPROCPRIORITY_LOW, "Low", 9, 0, g_aTypesThread }, { RTPROCPRIORITY_LOW, "Low", 11, 0, g_aTypesThread }, { RTPROCPRIORITY_LOW, "Low", 15, 0, g_aTypesThread }, { RTPROCPRIORITY_LOW, "Low", 17, 0, g_aTypesThread }, { RTPROCPRIORITY_LOW, "Low", 19, 0, g_aTypesThread }, { RTPROCPRIORITY_LOW, "Low", 7, 0, g_aTypesThread }, { RTPROCPRIORITY_LOW, "Low", 5, 0, g_aTypesThread }, { RTPROCPRIORITY_LOW, "Low", 3, 0, g_aTypesThread }, { RTPROCPRIORITY_LOW, "Low", 1, 0, g_aTypesThread }, { RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesThread }, { RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesThreadFlat }, { RTPROCPRIORITY_HIGH, "High", -9, 0, g_aTypesThread }, { RTPROCPRIORITY_HIGH, "High", -7, 0, g_aTypesThread }, { RTPROCPRIORITY_HIGH, "High", -5, 0, g_aTypesThread }, { RTPROCPRIORITY_HIGH, "High", -3, 0, g_aTypesThread }, { RTPROCPRIORITY_HIGH, "High", -1, 0, g_aTypesThread }, { RTPROCPRIORITY_HIGH, "High", -9, 0, g_aTypesThreadFlat }, { RTPROCPRIORITY_HIGH, "High", -1, 0, g_aTypesThreadFlat } }; /** * Deltas for a process in which we are not restricted * to only be lowering the priority. */ static const PROCPRIORITYTYPE g_aTypesUnixFree[RTTHREADTYPE_END] = { { RTTHREADTYPE_INVALID, -999999999 }, { RTTHREADTYPE_INFREQUENT_POLLER, +3 }, { RTTHREADTYPE_MAIN_HEAVY_WORKER, +2 }, { RTTHREADTYPE_EMULATION, +1 }, { RTTHREADTYPE_DEFAULT, 0 }, { RTTHREADTYPE_GUI, 0 }, { RTTHREADTYPE_MAIN_WORKER, 0 }, { RTTHREADTYPE_VRDP_IO, -1 }, { RTTHREADTYPE_DEBUGGER, -1 }, { RTTHREADTYPE_MSG_PUMP, -2 }, { RTTHREADTYPE_IO, -3 }, { RTTHREADTYPE_TIMER, -4 } }; /** * Deltas for a process in which we are restricted * to only be lowering the priority. */ static const PROCPRIORITYTYPE g_aTypesUnixRestricted[RTTHREADTYPE_END] = { { RTTHREADTYPE_INVALID, -999999999 }, { RTTHREADTYPE_INFREQUENT_POLLER, +3 }, { RTTHREADTYPE_MAIN_HEAVY_WORKER, +2 }, { RTTHREADTYPE_EMULATION, +1 }, { RTTHREADTYPE_DEFAULT, 0 }, { RTTHREADTYPE_GUI, 0 }, { RTTHREADTYPE_MAIN_WORKER, 0 }, { RTTHREADTYPE_VRDP_IO, 0 }, { RTTHREADTYPE_DEBUGGER, 0 }, { RTTHREADTYPE_MSG_PUMP, 0 }, { RTTHREADTYPE_IO, 0 }, { RTTHREADTYPE_TIMER, 0 } }; /** * Deltas for a process in which we are restricted * to only be lowering the priority. */ static const PROCPRIORITYTYPE g_aTypesUnixFlat[RTTHREADTYPE_END] = { { RTTHREADTYPE_INVALID, -999999999 }, { RTTHREADTYPE_INFREQUENT_POLLER, 0 }, { RTTHREADTYPE_MAIN_HEAVY_WORKER, 0 }, { RTTHREADTYPE_EMULATION, 0 }, { RTTHREADTYPE_DEFAULT, 0 }, { RTTHREADTYPE_GUI, 0 }, { RTTHREADTYPE_MAIN_WORKER, 0 }, { RTTHREADTYPE_VRDP_IO, 0 }, { RTTHREADTYPE_DEBUGGER, 0 }, { RTTHREADTYPE_MSG_PUMP, 0 }, { RTTHREADTYPE_IO, 0 }, { RTTHREADTYPE_TIMER, 0 } }; /** * Process and thread level priority, full access at thread level. */ static const PROCPRIORITY g_aUnixConfigs[] = { { RTPROCPRIORITY_FLAT, "Flat", 0, 0, g_aTypesUnixFlat }, { RTPROCPRIORITY_LOW, "Low", 9, 9, g_aTypesUnixFree }, { RTPROCPRIORITY_LOW, "Low", 9, 9, g_aTypesUnixFlat }, { RTPROCPRIORITY_LOW, "Low", 15, 15, g_aTypesUnixFree }, { RTPROCPRIORITY_LOW, "Low", 15, 15, g_aTypesUnixFlat }, { RTPROCPRIORITY_LOW, "Low", 17, 17, g_aTypesUnixFree }, { RTPROCPRIORITY_LOW, "Low", 17, 17, g_aTypesUnixFlat }, { RTPROCPRIORITY_LOW, "Low", 19, 19, g_aTypesUnixFlat }, { RTPROCPRIORITY_LOW, "Low", 9, 9, g_aTypesUnixRestricted }, { RTPROCPRIORITY_LOW, "Low", 15, 15, g_aTypesUnixRestricted }, { RTPROCPRIORITY_LOW, "Low", 17, 17, g_aTypesUnixRestricted }, { RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesUnixFree }, { RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesUnixRestricted }, { RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesUnixFlat }, { RTPROCPRIORITY_HIGH, "High", -9, -9, g_aTypesUnixFree }, { RTPROCPRIORITY_HIGH, "High", -7, -7, g_aTypesUnixFree }, { RTPROCPRIORITY_HIGH, "High", -5, -5, g_aTypesUnixFree }, { RTPROCPRIORITY_HIGH, "High", -3, -3, g_aTypesUnixFree }, { RTPROCPRIORITY_HIGH, "High", -1, -1, g_aTypesUnixFree }, { RTPROCPRIORITY_HIGH, "High", -9, -9, g_aTypesUnixRestricted }, { RTPROCPRIORITY_HIGH, "High", -7, -7, g_aTypesUnixRestricted }, { RTPROCPRIORITY_HIGH, "High", -5, -5, g_aTypesUnixRestricted }, { RTPROCPRIORITY_HIGH, "High", -3, -3, g_aTypesUnixRestricted }, { RTPROCPRIORITY_HIGH, "High", -1, -1, g_aTypesUnixRestricted }, { RTPROCPRIORITY_HIGH, "High", -9, -9, g_aTypesUnixFlat }, { RTPROCPRIORITY_HIGH, "High", -7, -7, g_aTypesUnixFlat }, { RTPROCPRIORITY_HIGH, "High", -5, -5, g_aTypesUnixFlat }, { RTPROCPRIORITY_HIGH, "High", -3, -3, g_aTypesUnixFlat }, { RTPROCPRIORITY_HIGH, "High", -1, -1, g_aTypesUnixFlat } }; /** * The dynamic default priority configuration. * * This will be recalulated at runtime depending on what the * system allow us to do and what the current priority is. */ static PROCPRIORITY g_aDefaultPriority = { RTPROCPRIORITY_LOW, "Default", 0, 0, g_aTypesUnixRestricted }; /** Pointer to the current priority configuration. */ static const PROCPRIORITY *g_pProcessPriority = &g_aDefaultPriority; /** Set to what kind of scheduling priority support the host * OS seems to be offering. Determined at runtime. */ static enum { OSPRIOSUP_UNDETERMINED = 0, /** An excellent combination of process and thread level * I.e. setpriority() works on process level, one have to be supervisor * to raise priority as is the custom in unix. While pthread_setschedparam() * works on thread level and we can raise the priority just like we want. * * I think this is what FreeBSD offers. (It is certainly analogous to what * NT offers if you wondered.) Linux on the other hand doesn't provide this * for processes with SCHED_OTHER policy, and I'm not sure if we want to * play around with using the real-time SCHED_RR and SCHED_FIFO which would * require special privileges anyway. */ OSPRIOSUP_PROCESS_AND_THREAD_LEVEL, /** A rough thread level priority only. * setpriority() is the only real game in town, and it works on thread level. */ OSPRIOSUP_THREAD_LEVEL } volatile g_enmOsPrioSup = OSPRIOSUP_UNDETERMINED; /** Set if we figure we have nice capability, meaning we can use setpriority * to raise the priority. */ bool g_fCanNice = false; /********************************************************************************************************************************* * Internal Functions * *********************************************************************************************************************************/ /** * Saves all the scheduling attributes we can think of. */ static void rtSchedNativeSave(PSAVEDPRIORITY pSave) { memset(pSave, 0xff, sizeof(*pSave)); errno = 0; pSave->iPriority = getpriority(PRIO_PROCESS, 0 /* current process */); Assert(errno == 0); errno = 0; sched_getparam(0 /* current process */, &pSave->SchedParam); Assert(errno == 0); errno = 0; pSave->iPolicy = sched_getscheduler(0 /* current process */); Assert(errno == 0); int rc = pthread_getschedparam(pthread_self(), &pSave->iPthreadPolicy, &pSave->PthreadSchedParam); Assert(rc == 0); NOREF(rc); } /** * Restores scheduling attributes. * Most of this won't work right, but anyway... */ static void rtSchedNativeRestore(PSAVEDPRIORITY pSave) { setpriority(PRIO_PROCESS, 0, pSave->iPriority); sched_setscheduler(0, pSave->iPolicy, &pSave->SchedParam); sched_setparam(0, &pSave->SchedParam); pthread_setschedparam(pthread_self(), pSave->iPthreadPolicy, &pSave->PthreadSchedParam); } /** * Starts a worker thread and wait for it to complete. * We cannot use RTThreadCreate since we're already owner of the RW lock. */ static int rtSchedCreateThread(void *(*pfnThread)(void *pvArg), void *pvArg) { /* * Setup thread attributes. */ pthread_attr_t ThreadAttr; int rc = pthread_attr_init(&ThreadAttr); if (!rc) { rc = pthread_attr_setdetachstate(&ThreadAttr, PTHREAD_CREATE_JOINABLE); if (!rc) { rc = pthread_attr_setstacksize(&ThreadAttr, 128*1024); if (!rc) { /* * Create the thread. */ pthread_t Thread; rc = pthread_create(&Thread, &ThreadAttr, pfnThread, pvArg); if (!rc) { pthread_attr_destroy(&ThreadAttr); /* * Wait for the thread to finish. */ void *pvRet = (void *)-1; do { rc = pthread_join(Thread, &pvRet); } while (rc == EINTR); if (rc) return RTErrConvertFromErrno(rc); return (int)(uintptr_t)pvRet; } } } pthread_attr_destroy(&ThreadAttr); } return RTErrConvertFromErrno(rc); } static void rtSchedDumpPriority(void) { #ifdef THREAD_LOGGING Log(("Priority: g_fCanNice=%d g_enmOsPrioSup=%d\n", g_fCanNice, g_enmOsPrioSup)); Log(("Priority: enmPriority=%d \"%s\" iNice=%d iDelta=%d\n", g_pProcessPriority->enmPriority, g_pProcessPriority->pszName, g_pProcessPriority->iNice, g_pProcessPriority->iDelta)); Log(("Priority: %2d INFREQUENT_POLLER = %d\n", RTTHREADTYPE_INFREQUENT_POLLER, g_pProcessPriority->paTypes[RTTHREADTYPE_INFREQUENT_POLLER].iPriority)); Log(("Priority: %2d MAIN_HEAVY_WORKER = %d\n", RTTHREADTYPE_MAIN_HEAVY_WORKER, g_pProcessPriority->paTypes[RTTHREADTYPE_MAIN_HEAVY_WORKER].iPriority)); Log(("Priority: %2d EMULATION = %d\n", RTTHREADTYPE_EMULATION , g_pProcessPriority->paTypes[RTTHREADTYPE_EMULATION ].iPriority)); Log(("Priority: %2d DEFAULT = %d\n", RTTHREADTYPE_DEFAULT , g_pProcessPriority->paTypes[RTTHREADTYPE_DEFAULT ].iPriority)); Log(("Priority: %2d GUI = %d\n", RTTHREADTYPE_GUI , g_pProcessPriority->paTypes[RTTHREADTYPE_GUI ].iPriority)); Log(("Priority: %2d MAIN_WORKER = %d\n", RTTHREADTYPE_MAIN_WORKER , g_pProcessPriority->paTypes[RTTHREADTYPE_MAIN_WORKER ].iPriority)); Log(("Priority: %2d VRDP_IO = %d\n", RTTHREADTYPE_VRDP_IO , g_pProcessPriority->paTypes[RTTHREADTYPE_VRDP_IO ].iPriority)); Log(("Priority: %2d DEBUGGER = %d\n", RTTHREADTYPE_DEBUGGER , g_pProcessPriority->paTypes[RTTHREADTYPE_DEBUGGER ].iPriority)); Log(("Priority: %2d MSG_PUMP = %d\n", RTTHREADTYPE_MSG_PUMP , g_pProcessPriority->paTypes[RTTHREADTYPE_MSG_PUMP ].iPriority)); Log(("Priority: %2d IO = %d\n", RTTHREADTYPE_IO , g_pProcessPriority->paTypes[RTTHREADTYPE_IO ].iPriority)); Log(("Priority: %2d TIMER = %d\n", RTTHREADTYPE_TIMER , g_pProcessPriority->paTypes[RTTHREADTYPE_TIMER ].iPriority)); #endif } /** * The prober thread. * We don't want to mess with the priority of the calling thread. * * @remark This is pretty presumptive stuff, but if it works on Linux and * FreeBSD it does what I want. */ static void *rtSchedNativeProberThread(void *pvUser) { SAVEDPRIORITY SavedPriority; rtSchedNativeSave(&SavedPriority); /* * Let's first try and see what we get on a thread level. */ int iMax = sched_get_priority_max(SavedPriority.iPthreadPolicy); int iMin = sched_get_priority_min(SavedPriority.iPthreadPolicy); if (iMax - iMin >= 32) { pthread_t Self = pthread_self(); int i = iMin; while (i <= iMax) { struct sched_param SchedParam = SavedPriority.PthreadSchedParam; SchedParam.sched_priority = i; if (pthread_setschedparam(Self, SavedPriority.iPthreadPolicy, &SchedParam)) break; i++; } if (i == iMax) g_enmOsPrioSup = OSPRIOSUP_PROCESS_AND_THREAD_LEVEL; } /* * Ok, we didn't have the good stuff, so let's fall back on the unix stuff. */ if (g_enmOsPrioSup == OSPRIOSUP_UNDETERMINED) g_enmOsPrioSup = OSPRIOSUP_THREAD_LEVEL; /* * Check if we can get higher priority (typically only root can do this). * (Won't work right if our priority is -19 to start with, but what the heck.) * * We assume that the unix priority is -19 to 19. I know there are defines * for this, but I don't remember which and if I'm awake enough to make sense * of them from any SuS spec. */ int iStart = getpriority(PRIO_PROCESS, 0); int i = iStart; while (i-- > -19) { if (setpriority(PRIO_PROCESS, 0, i)) break; } if (getpriority(PRIO_PROCESS, 0) != iStart) g_fCanNice = true; else g_fCanNice = false; /* done */ rtSchedNativeRestore(&SavedPriority); return (void *)VINF_SUCCESS; } /** * Calculate the scheduling properties for all the threads in the default * process priority, assuming the current thread have the type enmType. * * @returns iprt status code. * @param enmType The thread type to be assumed for the current thread. */ DECLHIDDEN(int) rtSchedNativeCalcDefaultPriority(RTTHREADTYPE enmType) { Assert(enmType > RTTHREADTYPE_INVALID && enmType < RTTHREADTYPE_END); /* * First figure out what's supported by the OS. */ if (g_enmOsPrioSup == OSPRIOSUP_UNDETERMINED) { int iPriority = getpriority(PRIO_PROCESS, 0); int rc = rtSchedCreateThread(rtSchedNativeProberThread, NULL); if (RT_FAILURE(rc)) return rc; if (g_enmOsPrioSup == OSPRIOSUP_UNDETERMINED) g_enmOsPrioSup = OSPRIOSUP_THREAD_LEVEL; Assert(getpriority(PRIO_PROCESS, 0) == iPriority); NOREF(iPriority); } /* * Now let's see what we can do... */ int iPriority = getpriority(PRIO_PROCESS, 0); switch (g_enmOsPrioSup) { case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL: { g_aDefaultPriority.iNice = iPriority; g_aDefaultPriority.iDelta = 0; g_aDefaultPriority.paTypes = g_aTypesThread; Assert(enmType == g_aDefaultPriority.paTypes[enmType].enmType); break; } case OSPRIOSUP_THREAD_LEVEL: { if (g_fCanNice) g_aDefaultPriority.paTypes = g_aTypesUnixFree; else g_aDefaultPriority.paTypes = g_aTypesUnixRestricted; Assert(enmType == g_aDefaultPriority.paTypes[enmType].enmType); g_aDefaultPriority.iNice = iPriority - g_aDefaultPriority.paTypes[enmType].iPriority; g_aDefaultPriority.iDelta = g_aDefaultPriority.iNice; break; } default: AssertFailed(); break; } rtSchedDumpPriority(); return VINF_SUCCESS; } /** * The validator thread. * We don't want to mess with the priority of the calling thread. * * @remark This is pretty presumptive stuff, but if it works on Linux and * FreeBSD it does what I want. */ static void *rtSchedNativeValidatorThread(void *pvUser) { const PROCPRIORITY *pCfg = (const PROCPRIORITY *)pvUser; SAVEDPRIORITY SavedPriority; rtSchedNativeSave(&SavedPriority); int rc = VINF_SUCCESS; switch (g_enmOsPrioSup) { /* * Try set the specified process priority and then try * out all the thread priorities which are used. */ case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL: { if (!setpriority(PRIO_PROCESS, 0, pCfg->iNice)) { int iMin = sched_get_priority_min(SavedPriority.iPolicy); pthread_t Self = pthread_self(); for (int i = RTTHREADTYPE_INVALID + 1; i < RTTHREADTYPE_END; i++) { struct sched_param SchedParam = SavedPriority.PthreadSchedParam; SchedParam.sched_priority = pCfg->paTypes[i].iPriority + pCfg->iDelta + iMin; rc = pthread_setschedparam(Self, SavedPriority.iPthreadPolicy, &SchedParam); if (rc) { rc = RTErrConvertFromErrno(rc); break; } } } else rc = RTErrConvertFromErrno(errno); break; } /* * Try out the priorities from the top and down. */ case OSPRIOSUP_THREAD_LEVEL: { int i = RTTHREADTYPE_END; while (--i > RTTHREADTYPE_INVALID) { int iPriority = pCfg->paTypes[i].iPriority + pCfg->iDelta; if (setpriority(PRIO_PROCESS, 0, iPriority)) { rc = RTErrConvertFromErrno(errno); break; } } break; } default: AssertFailed(); break; } /* done */ rtSchedNativeRestore(&SavedPriority); return (void *)rc; } /** * Validates and sets the process priority. * This will check that all rtThreadNativeSetPriority() will success for all the * thread types when applied to the current thread. * * @returns iprt status code. * @param enmPriority The priority to validate and set. */ DECLHIDDEN(int) rtProcNativeSetPriority(RTPROCPRIORITY enmPriority) { Assert(enmPriority > RTPROCPRIORITY_INVALID && enmPriority < RTPROCPRIORITY_LAST); int rc = VINF_SUCCESS; if (enmPriority == RTPROCPRIORITY_DEFAULT) g_pProcessPriority = &g_aDefaultPriority; else { /* * Select the array to search. */ const PROCPRIORITY *pa; unsigned c; switch (g_enmOsPrioSup) { case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL: pa = g_aProcessAndThread; c = RT_ELEMENTS(g_aProcessAndThread); break; case OSPRIOSUP_THREAD_LEVEL: pa = g_aUnixConfigs; c = RT_ELEMENTS(g_aUnixConfigs); break; default: pa = NULL; c = 0; break; } /* * Search the array. */ rc = VERR_FILE_NOT_FOUND; unsigned i; for (i = 0; i < c; i++) { if (pa[i].enmPriority == enmPriority) { /* * Validate it. */ int iPriority = getpriority(PRIO_PROCESS, 0); int rc3 = rtSchedCreateThread(rtSchedNativeValidatorThread, (void *)&pa[i]); Assert(getpriority(PRIO_PROCESS, 0) == iPriority); NOREF(iPriority); if (RT_SUCCESS(rc)) rc = rc3; if (RT_SUCCESS(rc)) break; } } /* * Did we get lucky? * If so update process priority and globals. */ if (RT_SUCCESS(rc)) { switch (g_enmOsPrioSup) { case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL: if (setpriority(PRIO_PROCESS, 0, pa[i].iNice)) { rc = RTErrConvertFromErrno(errno); AssertMsgFailed(("setpriority(,,%d) -> errno=%d rc=%Rrc\n", pa[i].iNice, errno, rc)); } break; default: break; } if (RT_SUCCESS(rc)) g_pProcessPriority = &pa[i]; } } #ifdef THREAD_LOGGING LogFlow(("rtProcNativeSetPriority: returns %Rrc enmPriority=%d\n", rc, enmPriority)); rtSchedDumpPriority(); #endif return rc; } /** * Sets the priority of the thread according to the thread type * and current process priority. * * The RTTHREADINT::enmType member has not yet been updated and will be updated by * the caller on a successful return. * * @returns iprt status code. * @param Thread The thread in question. * @param enmType The thread type. */ DECLHIDDEN(int) rtThreadNativeSetPriority(PRTTHREADINT pThread, RTTHREADTYPE enmType) { Assert(enmType > RTTHREADTYPE_INVALID && enmType < RTTHREADTYPE_END); Assert(enmType == g_pProcessPriority->paTypes[enmType].enmType); Assert((pthread_t)pThread->Core.Key == pthread_self()); int rc = VINF_SUCCESS; switch (g_enmOsPrioSup) { case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL: { struct sched_param SchedParam = {-9999999}; int iPolicy = -7777777; pthread_t Self = pthread_self(); rc = pthread_getschedparam(Self, &iPolicy, &SchedParam); if (!rc) { SchedParam.sched_priority = g_pProcessPriority->paTypes[enmType].iPriority + g_pProcessPriority->iDelta + sched_get_priority_min(iPolicy); rc = pthread_setschedparam(Self, iPolicy, &SchedParam); if (!rc) { #ifdef THREAD_LOGGING Log(("rtThreadNativeSetPriority: Thread=%p enmType=%d iPolicy=%d sched_priority=%d pid=%d\n", pThread->Core.Key, enmType, iPolicy, SchedParam.sched_priority, getpid())); #endif break; } } int rcNative = rc; rc = RTErrConvertFromErrno(rc); AssertMsgFailed(("pthread_[gs]etschedparam(%p, %d, {%d}) -> rcNative=%d rc=%Rrc\n", (void *)Self, iPolicy, SchedParam.sched_priority, rcNative, rc)); NOREF(rcNative); break; } case OSPRIOSUP_THREAD_LEVEL: { int iPriority = g_pProcessPriority->paTypes[enmType].iPriority + g_pProcessPriority->iDelta; if (!setpriority(PRIO_PROCESS, 0, iPriority)) { AssertMsg(iPriority == getpriority(PRIO_PROCESS, 0), ("iPriority=%d getpriority()=%d\n", iPriority, getpriority(PRIO_PROCESS, 0))); #ifdef THREAD_LOGGING Log(("rtThreadNativeSetPriority: Thread=%p enmType=%d iPriority=%d pid=%d\n", pThread->Core.Key, enmType, iPriority, getpid())); #endif } else { #if 0 rc = RTErrConvertFromErrno(errno); AssertMsgFailed(("setpriority(,, %d) -> errno=%d rc=%Rrc\n", iPriority, errno, rc)); #else /** @todo * Just keep quiet about failures now - we'll fail here because we're not * allowed to raise our own priority. This is a problem when starting the * threads with higher priority from EMT (i.e. most threads it starts). * This is apparently inherited from the parent in some cases and not * in other cases. I guess this would come down to which kind of pthread * implementation is actually in use, and how many sensible patches which * are installed. * I need to find a system where this problem shows up in order to come up * with a proper fix. There's an pthread_create attribute for not inheriting * scheduler stuff I think... */ rc = VINF_SUCCESS; #endif } break; } /* * Any thread created before we determine the default config, remains unchanged! * The prober thread above is one of those. */ default: break; } return rc; }