diff options
Diffstat (limited to 'doc/texi2pod.pl')
| -rwxr-xr-x | doc/texi2pod.pl | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/doc/texi2pod.pl b/doc/texi2pod.pl new file mode 100755 index 0000000..6dacf68 --- /dev/null +++ b/doc/texi2pod.pl @@ -0,0 +1,453 @@ +#! /usr/bin/env perl + +# Copyright (C) 1999-2001, 2003, 2007, 2009-2011, 2015, 2018 Free +# Software Foundation, Inc. + +# This file is part of GCC. + +# GCC is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. + +# GCC is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with GCC. If not, see <http://www.gnu.org/licenses/>. + +# This does trivial (and I mean _trivial_) conversion of Texinfo +# markup to Perl POD format. It's intended to be used to extract +# something suitable for a manpage from a Texinfo document. + +use warnings; +BEGIN { eval { require warnings; } and warnings->import; } + +$output = 0; +$skipping = 0; +%sects = (); +$section = ""; +@icstack = (); +@endwstack = (); +@skstack = (); +@instack = (); +$shift = ""; +%defs = (); +$fnno = 1; +$inf = ""; +$ibase = ""; + +while ($_ = shift) { + if (/^-D(.*)$/) { + if ($1 ne "") { + $flag = $1; + } else { + $flag = shift; + } + $value = ""; + ($flag, $value) = ($flag =~ /^([^=]+)(?:=(.+))?/); + die "no flag specified for -D\n" + unless $flag ne ""; + die "flags may only contain letters, digits, hyphens, dashes and underscores\n" + unless $flag =~ /^[a-zA-Z0-9_-]+$/; + $defs{$flag} = $value; + } elsif (/^-/) { + usage(); + } else { + $in = $_, next unless defined $in; + $out = $_, next unless defined $out; + usage(); + } +} + +if (defined $in) { + $inf = gensym(); + open($inf, "<$in") or die "opening \"$in\": $!\n"; + $ibase = $1 if $in =~ m|^(.+)/[^/]+$|; +} else { + $inf = \*STDIN; +} + +if (defined $out) { + open(STDOUT, ">$out") or die "opening \"$out\": $!\n"; +} + +while(defined $inf) { +while(<$inf>) { + # Certain commands are discarded without further processing. + /^\@(?: + [a-z]+index # @*index: useful only in complete manual + |need # @need: useful only in printed manual + |(?:end\s+)?group # @group .. @end group: ditto + |page # @page: ditto + |node # @node: useful only in .info file + |(?:end\s+)?ifnottex # @ifnottex .. @end ifnottex: use contents + )\b/x and next; + + chomp; + + # Look for filename and title markers. + /^\@setfilename\s+([^.]+)/ and $fn = $1, next; + /^\@settitle\s+([^.]+)/ and $tl = postprocess($1), next; + + # Identify a man title but keep only the one we are interested in. + /^\@c\s+man\s+title\s+([A-Za-z0-9-]+)\s+(.+)/ and do { + if (exists $defs{$1}) { + $fn = $1; + $tl = postprocess($2); + } + next; + }; + + # Look for blocks surrounded by @c man begin SECTION ... @c man end. + # This really oughta be @ifman ... @end ifman and the like, but such + # would require rev'ing all other Texinfo translators. + /^\@c\s+man\s+begin\s+([A-Z]+)\s+([A-Za-z0-9-]+)/ and do { + $output = 1 if exists $defs{$2}; + $sect = $1; + next; + }; + /^\@c\s+man\s+begin\s+([A-Z]+)/ and $sect = $1, $output = 1, next; + /^\@c\s+man\s+end/ and do { + $sects{$sect} = "" unless exists $sects{$sect}; + $sects{$sect} .= postprocess($section); + $section = ""; + $output = 0; + next; + }; + + # handle variables + /^\@set\s+([a-zA-Z0-9_-]+)\s*(.*)$/ and do { + $defs{$1} = $2; + next; + }; + /^\@clear\s+([a-zA-Z0-9_-]+)/ and do { + delete $defs{$1}; + next; + }; + + next unless $output; + + # Discard comments. (Can't do it above, because then we'd never see + # @c man lines.) + /^\@c\b/ and next; + + # End-block handler goes up here because it needs to operate even + # if we are skipping. + /^\@end\s+([a-z]+)/ and do { + # Ignore @end foo, where foo is not an operation which may + # cause us to skip, if we are presently skipping. + my $ended = $1; + next if $skipping && $ended !~ /^(?:ifset|ifclear|ignore|menu|iftex|copying)$/; + + die "\@end $ended without \@$ended at line $.\n" unless defined $endw; + die "\@$endw ended by \@end $ended at line $.\n" unless $ended eq $endw; + + $endw = pop @endwstack; + + if ($ended =~ /^(?:ifset|ifclear|ignore|menu|iftex)$/) { + $skipping = pop @skstack; + next; + } elsif ($ended =~ /^(?:example|smallexample|display)$/) { + $shift = ""; + $_ = ""; # need a paragraph break + } elsif ($ended =~ /^(?:itemize|enumerate|[fv]?table)$/) { + $_ = "\n=back\n"; + $ic = pop @icstack; + } else { + die "unknown command \@end $ended at line $.\n"; + } + }; + + # We must handle commands which can cause skipping even while we + # are skipping, otherwise we will not process nested conditionals + # correctly. + /^\@ifset\s+([a-zA-Z0-9_-]+)/ and do { + push @endwstack, $endw; + push @skstack, $skipping; + $endw = "ifset"; + $skipping = 1 unless exists $defs{$1}; + next; + }; + + /^\@ifclear\s+([a-zA-Z0-9_-]+)/ and do { + push @endwstack, $endw; + push @skstack, $skipping; + $endw = "ifclear"; + $skipping = 1 if exists $defs{$1}; + next; + }; + + /^\@(ignore|menu|iftex|copying)\b/ and do { + push @endwstack, $endw; + push @skstack, $skipping; + $endw = $1; + $skipping = 1; + next; + }; + + next if $skipping; + + # Character entities. First the ones that can be replaced by raw text + # or discarded outright: + s/\@copyright\{\}/(c)/g; + s/\@dots\{\}/.../g; + s/\@enddots\{\}/..../g; + s/\@([.!? ])/$1/g; + s/\@[:-]//g; + s/\@bullet(?:\{\})?/*/g; + s/\@TeX\{\}/TeX/g; + s/\@pounds\{\}/\#/g; + s/\@minus(?:\{\})?/-/g; + s/\\,/,/g; + + # Now the ones that have to be replaced by special escapes + # (which will be turned back into text by unmunge()) + s/&/&/g; + s/\@\@/&at;/g; + s/\@\{/{/g; + s/\@\}/}/g; + + # Inside a verbatim block, handle @var specially. + if ($shift ne "") { + s/\@var\{([^\}]*)\}/<$1>/g; + } + + # POD doesn't interpret E<> inside a verbatim block. + if ($shift eq "") { + s/</</g; + s/>/>/g; + } else { + s/</</g; + s/>/>/g; + } + + # Single line command handlers. + + /^\@include\s+(.+)$/ and do { + push @instack, $inf; + $inf = gensym(); + $file = postprocess($1); + + # Try cwd and $ibase. + open($inf, "<" . $file) + or open($inf, "<" . $ibase . "/" . $file) + or die "cannot open $file or $ibase/$file: $!\n"; + next; + }; + + /^\@(?:section|unnumbered|unnumberedsec|center)\s+(.+)$/ + and $_ = "\n=head2 $1\n"; + /^\@subsection\s+(.+)$/ + and $_ = "\n=head3 $1\n"; + + # Block command handlers: + /^\@itemize(?:\s+(\@[a-z]+|\*|-))?/ and do { + push @endwstack, $endw; + push @icstack, $ic; + if (defined $1) { + $ic = $1; + } else { + $ic = '@bullet'; + } + $_ = "\n=over 4\n"; + $endw = "itemize"; + }; + + /^\@enumerate(?:\s+([a-zA-Z0-9]+))?/ and do { + push @endwstack, $endw; + push @icstack, $ic; + if (defined $1) { + $ic = $1 . "."; + } else { + $ic = "1."; + } + $_ = "\n=over 4\n"; + $endw = "enumerate"; + }; + + /^\@([fv]?table)\s+(\@[a-z]+)/ and do { + push @endwstack, $endw; + push @icstack, $ic; + $endw = $1; + $ic = $2; + $ic =~ s/\@(?:samp|strong|key|gcctabopt|env)/B/; + $ic =~ s/\@(?:code|kbd)/C/; + $ic =~ s/\@(?:dfn|var|emph|cite|i)/I/; + $ic =~ s/\@(?:file)/F/; + $_ = "\n=over 4\n"; + }; + + /^\@((?:small)?example|display)/ and do { + push @endwstack, $endw; + $endw = $1; + $shift = "\t"; + $_ = ""; # need a paragraph break + }; + + /^\@itemx?\s*(.+)?$/ and do { + if (defined $1) { + my $thing = $1; + if ($ic =~ /\@asis/) { + $_ = "\n=item C<$thing>\n"; + } else { + # Entity escapes prevent munging by the <> processing below. + $_ = "\n=item $ic\<$thing\>\n"; + } + } else { + $_ = "\n=item $ic\n"; + $ic =~ y/A-Ya-y/B-Zb-z/; + $ic =~ s/(\d+)/$1 + 1/eg; + } + }; + + $section .= $shift.$_."\n"; +} +# End of current file. +close($inf); +$inf = pop @instack; +} + +die "No filename or title\n" unless defined $fn && defined $tl; + +$sects{NAME} = "$fn \- $tl\n"; +$sects{FOOTNOTES} .= "=back\n" if exists $sects{FOOTNOTES}; + +print "=encoding utf-8\n\n"; + +for $sect (qw(NAME SYNOPSIS DESCRIPTION OPTIONS ENVIRONMENT EXITSTATUS + FILES BUGS NOTES FOOTNOTES SEEALSO AUTHOR COPYRIGHT)) { + if(exists $sects{$sect}) { + $head = $sect; + $head =~ s/SEEALSO/SEE ALSO/; + $head =~ s/EXITSTATUS/EXIT STATUS/; + print "=head1 $head\n\n"; + print scalar unmunge ($sects{$sect}); + print "\n"; + } +} + +sub usage +{ + die "usage: $0 [-D toggle...] [infile [outfile]]\n"; +} + +sub postprocess +{ + local $_ = $_[0]; + + # @value{foo} is replaced by whatever 'foo' is defined as. + while (m/(\@value\{([a-zA-Z0-9_-]+)\})/g) { + if (! exists $defs{$2}) { + print STDERR "Option $2 not defined\n"; + s/\Q$1\E//; + } else { + $value = $defs{$2}; + s/\Q$1\E/$value/; + } + } + + # Formatting commands. + # Temporary escape for @r. + s/\@r\{([^\}]*)\}/R<$1>/g; + s/\@(?:dfn|var|emph|cite|i)\{([^\}]*)\}/I<$1>/g; + s/\@(?:code|kbd)\{([^\}]*)\}/C<$1>/g; + s/\@(?:gccoptlist|samp|strong|key|option|env|command|b)\{([^\}]*)\}/B<$1>/g; + s/\@sc\{([^\}]*)\}/\U$1/g; + s/\@file\{([^\}]*)\}/F<$1>/g; + s/\@w\{([^\}]*)\}/S<$1>/g; + s/\@(?:dmn|math)\{([^\}]*)\}/$1/g; + + # keep references of the form @ref{...}, print them bold + s/\@(?:ref)\{([^\}]*)\}/B<$1>/g; + + # Change double single quotes to double quotes. + s/''/"/g; + s/``/"/g; + + # Cross references are thrown away, as are @noindent and @refill. + # (@noindent is impossible in .pod, and @refill is unnecessary.) + # @* is also impossible in .pod; we discard it and any newline that + # follows it. Similarly, our macro @gol must be discarded. + + s/\(?\@xref\{(?:[^\}]*)\}(?:[^.<]|(?:<[^<>]*>))*\.\)?//g; + s/\s+\(\@pxref\{(?:[^\}]*)\}\)//g; + s/;\s+\@pxref\{(?:[^\}]*)\}//g; + s/\@noindent\s*//g; + s/\@refill//g; + s/\@gol//g; + s/\@\*\s*\n?//g; + + # @uref can take one, two, or three arguments, with different + # semantics each time. @url and @email are just like @uref with + # one argument, for our purposes. + s/\@(?:uref|url|email)\{([^\},]*)\}/<B<$1>>/g; + s/\@uref\{([^\},]*),([^\},]*)\}/$2 (C<$1>)/g; + s/\@uref\{([^\},]*),([^\},]*),([^\},]*)\}/$3/g; + + # Un-escape <> at this point. + s/</</g; + s/>/>/g; + + # Now un-nest all B<>, I<>, R<>. Theoretically we could have + # indefinitely deep nesting; in practice, one level suffices. + 1 while s/([BIR])<([^<>]*)([BIR])<([^<>]*)>/$1<$2>$3<$4>$1</g; + + # Replace R<...> with bare ...; eliminate empty markup, B<>; + # shift white space at the ends of [BI]<...> expressions outside + # the expression. + s/R<([^<>]*)>/$1/g; + s/[BI]<>//g; + s/([BI])<(\s+)([^>]+)>/$2$1<$3>/g; + s/([BI])<([^>]+?)(\s+)>/$1<$2>$3/g; + + # Extract footnotes. This has to be done after all other + # processing because otherwise the regexp will choke on formatting + # inside @footnote. + while (/\@footnote/g) { + s/\@footnote\{([^\}]+)\}/[$fnno]/; + add_footnote($1, $fnno); + $fnno++; + } + + return $_; +} + +sub unmunge +{ + # Replace escaped symbols with their equivalents. + local $_ = $_[0]; + + s/</E<lt>/g; + s/>/E<gt>/g; + s/{/\{/g; + s/}/\}/g; + s/&at;/\@/g; + s/&/&/g; + return $_; +} + +sub add_footnote +{ + unless (exists $sects{FOOTNOTES}) { + $sects{FOOTNOTES} = "\n=over 4\n\n"; + } + + $sects{FOOTNOTES} .= "=item $fnno.\n\n"; $fnno++; + $sects{FOOTNOTES} .= $_[0]; + $sects{FOOTNOTES} .= "\n\n"; +} + +# stolen from Symbol.pm +{ + my $genseq = 0; + sub gensym + { + my $name = "GEN" . $genseq++; + my $ref = \*{$name}; + delete $::{$name}; + return $ref; + } +} |