Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 391 insertions, 0 deletions

diff --git a/docs/components/realm-management-extension.rst b/docs/components/realm-management-extension.rst
new file mode 100644
index 0000000..6fc0c2e
--- /dev/null
+++ b/docs/components/realm-management-extension.rst
@@ -0,0 +1,391 @@
+
+Realm Management Extension (RME)
+====================================
+
+FEAT_RME (or RME for short) is an Armv9-A extension and is one component of the
+`Arm Confidential Compute Architecture (Arm CCA)`_. TF-A supports RME starting
+from version 2.6. This chapter discusses the changes to TF-A to support RME and
+provides instructions on how to build and run TF-A with RME.
+
+RME support in TF-A
+---------------------
+
+The following diagram shows an Arm CCA software architecture with TF-A as the
+EL3 firmware. In the Arm CCA architecture there are two additional security
+states and address spaces: ``Root`` and ``Realm``. TF-A firmware runs in the
+Root world. In the realm world, a Realm Management Monitor firmware (RMM)
+manages the execution of Realm VMs and their interaction with the hypervisor.
+
+.. image:: ../resources/diagrams/arm-cca-software-arch.png
+
+RME is the hardware extension to support Arm CCA. To support RME, various
+changes have been introduced to TF-A. We discuss those changes below.
+
+Changes to translation tables library
+***************************************
+RME adds Root and Realm Physical address spaces. To support this, two new
+memory type macros, ``MT_ROOT`` and ``MT_REALM``, have been added to the
+:ref:`Translation (XLAT) Tables Library`. These macros are used to configure
+memory regions as Root or Realm respectively.
+
+.. note::
+
+ Only version 2 of the translation tables library supports the new memory
+ types.
+
+Changes to context management
+*******************************
+A new CPU context for the Realm world has been added. The existing
+:ref:`CPU context management API<PSCI Library Integration guide for Armv8-A
+AArch32 systems>` can be used to manage Realm context.
+
+Boot flow changes
+*******************
+In a typical TF-A boot flow, BL2 runs at Secure-EL1. However when RME is
+enabled, TF-A runs in the Root world at EL3. Therefore, the boot flow is
+modified to run BL2 at EL3 when RME is enabled. In addition to this, a
+Realm-world firmware (RMM) is loaded by BL2 in the Realm physical address
+space.
+
+The boot flow when RME is enabled looks like the following:
+
+1. BL1 loads and executes BL2 at EL3
+2. BL2 loads images including RMM
+3. BL2 transfers control to BL31
+4. BL31 initializes SPM (if SPM is enabled)
+5. BL31 initializes RMM
+6. BL31 transfers control to Normal-world software
+
+Granule Protection Tables (GPT) library
+*****************************************
+Isolation between the four physical address spaces is enforced by a process
+called Granule Protection Check (GPC) performed by the MMU downstream any
+address translation. GPC makes use of Granule Protection Table (GPT) in the
+Root world that describes the physical address space assignment of every
+page (granule). A GPT library that provides APIs to initialize GPTs and to
+transition granules between different physical address spaces has been added.
+More information about the GPT library can be found in the
+:ref:`Granule Protection Tables Library` chapter.
+
+RMM Dispatcher (RMMD)
+************************
+RMMD is a new standard runtime service that handles the switch to the Realm
+world. It initializes the RMM and handles Realm Management Interface (RMI)
+SMC calls from Non-secure and Realm worlds.
+
+There is a contract between RMM and RMMD that defines the arguments that the
+former needs to take in order to initialize and also the possible return values.
+This contract is defined in the RMM Boot Interface, which can be found at
+:ref:`rmm_el3_boot_interface`.
+
+There is also a specification of the runtime services provided by TF-A
+to RMM. This can be found at :ref:`runtime_services_and_interface`.
+
+Test Realm Payload (TRP)
+*************************
+TRP is a small test payload that runs at R-EL2 and implements a subset of
+the Realm Management Interface (RMI) commands to primarily test EL3 firmware
+and the interface between R-EL2 and EL3. When building TF-A with RME enabled,
+if a path to an RMM image is not provided, TF-A builds the TRP by default
+and uses it as RMM image.
+
+Building and running TF-A with RME
+------------------------------------
+
+This section describes how you can build and run TF-A with RME enabled.
+We assume you have all the :ref:`Prerequisites` to build TF-A.
+
+The following instructions show you how to build and run TF-A with RME
+for two scenarios:
+
+- Three-world execution: TF-A with TF-A Tests or Linux.
+
+  - NS (TF-A Test or Linux),
+  - Root (TF-A)
+  - Realm (RMM or TRP)
+
+- Four-world execution: TF-A, Hafnium and TF-A Tests or Linux.
+
+  - NS (TF-A Test or Linux),
+  - Root (TF-A)
+  - Realm (RMM or TRP)
+  - SPM (Hafnium)
+
+To run the tests, you need an FVP model. Please use the :ref:`latest version
+<Arm Fixed Virtual Platforms (FVP)>` of *FVP_Base_RevC-2xAEMvA* model.
+
+Three World Testing with TF-A Tests
+*************************************
+
+**1. Obtain and build TF-A Tests with Realm Payload**
+
+The full set of instructions to setup build host and build options for
+TF-A-Tests can be found in the `TFTF Getting Started`_.
+
+Use the following instructions to build TF-A with `TF-A Tests`_ as the
+non-secure payload (BL33).
+
+.. code:: shell
+
+ git clone https://git.trustedfirmware.org/TF-A/tf-a-tests.git
+ cd tf-a-tests
+ make CROSS_COMPILE=aarch64-none-elf- PLAT=fvp DEBUG=1 all pack_realm
+
+This produces a TF-A Tests binary (**tftf.bin**) with Realm payload packaged
+and **sp_layout.json** in the **build/fvp/debug** directory.
+
+**2. Obtain and build RMM Image**
+
+Please refer to the `RMM Getting Started`_ on how to setup
+Host Environment and build RMM.
+
+The below command shows how to build RMM using the default build options for FVP.
+
+.. code:: shell
+
+ git clone --recursive https://git.trustedfirmware.org/TF-RMM/tf-rmm.git
+ cd tf-rmm
+ cmake -DRMM_CONFIG=fvp_defcfg -S . -B build
+ cmake --build build
+
+This will generate **rmm.img** in **build** folder.
+
+**3. Build TF-A**
+
+The `TF-A Getting Started`_ has the necessary instructions to setup Host
+machine and build TF-A.
+
+To build for RME, set ``ENABLE_RME`` build option to 1 and provide the path to
+the RMM binary using the ``RMM`` build option.
+Currently, this feature is only supported for the FVP platform.
+
+.. note::
+
+ ENABLE_RME build option is currently experimental.
+
+If the ``RMM`` option is not used, then the Test Realm Payload (TRP) in TF-A
+will be built and used as the RMM.
+
+.. code:: shell
+
+ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+ cd trusted-firmware-a
+ make CROSS_COMPILE=aarch64-none-elf- \
+ PLAT=fvp \
+ ENABLE_RME=1 \
+ RMM=<path/to/rmm.img> \
+ FVP_HW_CONFIG_DTS=fdts/fvp-base-gicv3-psci-1t.dts \
+ DEBUG=1 \
+ BL33=<path/to/tftf.bin> \
+ all fip
+
+This produces **bl1.bin** and **fip.bin** binaries in the **build/fvp/debug** directory.
+
+Running the tests for a 3 world FVP setup
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Use the following command to run the tests on FVP. TF-A Tests should boot
+and run the default tests including Realm world tests.
+
+.. code:: shell
+
+ FVP_Base_RevC-2xAEMvA                                          \
+ -C bp.refcounter.non_arch_start_at_default=1                   \
+ -C bp.secureflashloader.fname=<path/to/bl1.bin>                \
+ -C bp.flashloader0.fname=<path/to/fip.bin>                     \
+ -C bp.refcounter.use_real_time=0                               \
+ -C bp.ve_sysregs.exit_on_shutdown=1                            \
+ -C cache_state_modelled=1                                      \
+ -C bp.dram_size=2                                              \
+ -C bp.secure_memory=1                                          \
+ -C pci.pci_smmuv3.mmu.SMMU_ROOT_IDR0=3                         \
+ -C pci.pci_smmuv3.mmu.SMMU_ROOT_IIDR=0x43B                     \
+ -C pci.pci_smmuv3.mmu.root_register_page_offset=0x20000        \
+ -C cluster0.NUM_CORES=4                                        \
+ -C cluster0.PA_SIZE=48                                         \
+ -C cluster0.ecv_support_level=2                                \
+ -C cluster0.gicv3.cpuintf-mmap-access-level=2                  \
+ -C cluster0.gicv3.without-DS-support=1                         \
+ -C cluster0.gicv4.mask-virtual-interrupt=1                     \
+ -C cluster0.has_arm_v8-6=1                                     \
+ -C cluster0.has_amu=1                                          \
+ -C cluster0.has_branch_target_exception=1                      \
+ -C cluster0.rme_support_level=2                                \
+ -C cluster0.has_rndr=1                                         \
+ -C cluster0.has_v8_7_pmu_extension=2                           \
+ -C cluster0.max_32bit_el=-1                                    \
+ -C cluster0.stage12_tlb_size=1024                              \
+ -C cluster0.check_memory_attributes=0                          \
+ -C cluster0.ish_is_osh=1                                       \
+ -C cluster0.restriction_on_speculative_execution=2             \
+ -C cluster0.restriction_on_speculative_execution_aarch32=2     \
+ -C cluster1.NUM_CORES=4                                        \
+ -C cluster1.PA_SIZE=48                                         \
+ -C cluster1.ecv_support_level=2                                \
+ -C cluster1.gicv3.cpuintf-mmap-access-level=2                  \
+ -C cluster1.gicv3.without-DS-support=1                         \
+ -C cluster1.gicv4.mask-virtual-interrupt=1                     \
+ -C cluster1.has_arm_v8-6=1                                     \
+ -C cluster1.has_amu=1                                          \
+ -C cluster1.has_branch_target_exception=1                      \
+ -C cluster1.rme_support_level=2                                \
+ -C cluster1.has_rndr=1                                         \
+ -C cluster1.has_v8_7_pmu_extension=2                           \
+ -C cluster1.max_32bit_el=-1                                    \
+ -C cluster1.stage12_tlb_size=1024                              \
+ -C cluster1.check_memory_attributes=0                          \
+ -C cluster1.ish_is_osh=1                                       \
+ -C cluster1.restriction_on_speculative_execution=2             \
+ -C cluster1.restriction_on_speculative_execution_aarch32=2     \
+ -C pctl.startup=0.0.0.0                                        \
+ -C bp.smsc_91c111.enabled=1                                    \
+ -C bp.hostbridge.userNetworking=1
+
+The bottom of the output from *uart0* should look something like the following.
+
+.. code-block:: shell
+
+ ...
+
+ > Test suite 'FF-A Interrupt'
+                                                                Passed
+ > Test suite 'SMMUv3 tests'
+                                                                Passed
+ > Test suite 'PMU Leakage'
+                                                                Passed
+ > Test suite 'DebugFS'
+                                                                Passed
+ > Test suite 'RMI and SPM tests'
+                                                                Passed
+ > Test suite 'Realm payload at EL1'
+                                                                Passed
+ > Test suite 'Invalid memory access'
+                                                                Passed
+ ...
+
+Building TF-A with RME enabled Linux Kernel
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If an RME enabled Linux kernel and filesystem is available for testing,
+and a suitable NS boot loader is not available, then this option can be used to
+launch kernel directly after BL31:
+
+.. code-block:: shell
+
+ cd trusted-firmware-a
+ make CROSS_COMPILE=aarch64-none-elf- \
+ PLAT=fvp \
+ ENABLE_RME=1 \
+ RMM=<path/to/rmm.img> \
+ FVP_HW_CONFIG_DTS=fdts/fvp-base-gicv3-psci-1t.dts \
+ DEBUG=1 \
+ ARM_LINUX_KERNEL_AS_BL33=1 \
+ PRELOADED_BL33_BASE=0x84000000 \
+ all fip
+
+Boot and run the RME enabled Linux Kernel
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Use the following additional arguments to boot the kernel on FVP.
+
+.. code-block:: shell
+
+ --data cluster0.cpu0=<path_to_kernel_Image>@0x84000000         \
+ -C bp.virtioblockdevice.image_path=<path_to_rootfs.ext4>
+
+.. tip::
+
+ Set the FVP option `cache_state_modelled=0` to run Linux based tests much faster.
+
+Four-world execution with Hafnium and TF-A Tests
+*************************************************
+
+Four-world execution involves software components in each security state: root,
+secure, realm and non-secure. This section describes how to build TF-A
+with four-world support.
+
+We use TF-A as the root firmware, `Hafnium SPM`_ is the reference Secure world component
+and the software components for the other 2 worlds (Realm and Non-Secure)
+are as described in the previous section.
+
+**1. Obtain and build Hafnium**
+
+.. code:: shell
+
+ git clone --recurse-submodules https://git.trustedfirmware.org/hafnium/hafnium.git
+ cd hafnium
+ #  Use the default prebuilt LLVM/clang toolchain
+ PATH=$PWD/prebuilts/linux-x64/clang/bin:$PWD/prebuilts/linux-x64/dtc:$PATH
+
+Feature MTE needs to be disabled in Hafnium build, apply following patch to
+project/reference submodule
+
+.. code:: diff
+
+ diff --git a/BUILD.gn b/BUILD.gn
+ index cc6a78f..234b20a 100644
+ --- a/BUILD.gn
+ +++ b/BUILD.gn
+ @@ -83,7 +83,6 @@ aarch64_toolchains("secure_aem_v8a_fvp") {
+     pl011_base_address = "0x1c090000"
+     smmu_base_address = "0x2b400000"
+     smmu_memory_size = "0x100000"
+ -    enable_mte = "1"
+     plat_log_level = "LOG_LEVEL_INFO"
+   }
+ }
+
+.. code:: shell
+
+ make PROJECT=reference
+
+The Hafnium binary should be located at
+*out/reference/secure_aem_v8a_fvp_clang/hafnium.bin*
+
+**2. Build TF-A**
+
+Build TF-A with RME as well as SPM enabled.
+
+Use sp_layout.json previously generated in tf-a-test build.
+
+.. code:: shell
+
+ make CROSS_COMPILE=aarch64-none-elf- \
+ PLAT=fvp \
+ ENABLE_RME=1 \
+ FVP_HW_CONFIG_DTS=fdts/fvp-base-gicv3-psci-1t.dts \
+ SPD=spmd \
+ SPMD_SPM_AT_SEL2=1 \
+ BRANCH_PROTECTION=1 \
+ CTX_INCLUDE_PAUTH_REGS=1 \
+ DEBUG=1 \
+ SP_LAYOUT_FILE=<path/to/sp_layout.json> \
+ BL32=<path/to/hafnium.bin> \
+ BL33=<path/to/tftf.bin> \
+ RMM=<path/to/rmm.img> \
+ all fip
+
+Running the tests for a 4 world FVP setup
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Use the following arguments in addition to
+`Running the tests for a 3 world FVP setup`_ to run tests for 4 world setup.
+
+.. code:: shell
+
+ -C pci.pci_smmuv3.mmu.SMMU_AIDR=2              \
+ -C pci.pci_smmuv3.mmu.SMMU_IDR0=0x0046123B     \
+ -C pci.pci_smmuv3.mmu.SMMU_IDR1=0x00600002     \
+ -C pci.pci_smmuv3.mmu.SMMU_IDR3=0x1714         \
+ -C pci.pci_smmuv3.mmu.SMMU_IDR5=0xFFFF0475     \
+ -C pci.pci_smmuv3.mmu.SMMU_S_IDR1=0xA0000002   \
+ -C pci.pci_smmuv3.mmu.SMMU_S_IDR2=0            \
+ -C pci.pci_smmuv3.mmu.SMMU_S_IDR3=0
+
+.. _Arm Confidential Compute Architecture (Arm CCA): https://www.arm.com/why-arm/architecture/security-features/arm-confidential-compute-architecture
+.. _Arm Architecture Models website: https://developer.arm.com/tools-and-software/simulation-models/fixed-virtual-platforms/arm-ecosystem-models
+.. _TF-A Getting Started: https://trustedfirmware-a.readthedocs.io/en/latest/getting_started/index.html
+.. _TF-A Tests: https://trustedfirmware-a-tests.readthedocs.io/en/latest
+.. _TFTF Getting Started: https://trustedfirmware-a-tests.readthedocs.io/en/latest/getting_started/index.html
+.. _Hafnium SPM: https://www.trustedfirmware.org/projects/hafnium
+.. _RMM Getting Started: https://git.trustedfirmware.org/TF-RMM/tf-rmm.git/tree/docs/getting_started/index.rst