summaryrefslogtreecommitdiffstats
path: root/docs/design/trusted-board-boot.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-28 09:13:47 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-28 09:13:47 +0000
commit102b0d2daa97dae68d3eed54d8fe37a9cc38a892 (patch)
treebcf648efac40ca6139842707f0eba5a4496a6dd2 /docs/design/trusted-board-boot.rst
parentInitial commit. (diff)
downloadarm-trusted-firmware-102b0d2daa97dae68d3eed54d8fe37a9cc38a892.tar.xz
arm-trusted-firmware-102b0d2daa97dae68d3eed54d8fe37a9cc38a892.zip
Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r--docs/design/trusted-board-boot.rst263
1 files changed, 263 insertions, 0 deletions
diff --git a/docs/design/trusted-board-boot.rst b/docs/design/trusted-board-boot.rst
new file mode 100644
index 0000000..46177d7
--- /dev/null
+++ b/docs/design/trusted-board-boot.rst
@@ -0,0 +1,263 @@
+Trusted Board Boot
+==================
+
+The Trusted Board Boot (TBB) feature prevents malicious firmware from running on
+the platform by authenticating all firmware images up to and including the
+normal world bootloader. It does this by establishing a Chain of Trust using
+Public-Key-Cryptography Standards (PKCS).
+
+This document describes the design of Trusted Firmware-A (TF-A) TBB, which is an
+implementation of the `Trusted Board Boot Requirements (TBBR)`_ specification,
+Arm DEN0006D. It should be used in conjunction with the
+:ref:`Firmware Update (FWU)` design document, which implements a specific aspect
+of the TBBR.
+
+Chain of Trust
+--------------
+
+A Chain of Trust (CoT) starts with a set of implicitly trusted components. On
+the Arm development platforms, these components are:
+
+- A SHA-256 hash of the Root of Trust Public Key (ROTPK). It is stored in the
+ trusted root-key storage registers. Alternatively, a development ROTPK might
+ be used and its hash embedded into the BL1 and BL2 images (only for
+ development purposes).
+
+- The BL1 image, on the assumption that it resides in ROM so cannot be
+ tampered with.
+
+The remaining components in the CoT are either certificates or boot loader
+images. The certificates follow the `X.509 v3`_ standard. This standard
+enables adding custom extensions to the certificates, which are used to store
+essential information to establish the CoT.
+
+In the TBB CoT all certificates are self-signed. There is no need for a
+Certificate Authority (CA) because the CoT is not established by verifying the
+validity of a certificate's issuer but by the content of the certificate
+extensions. To sign the certificates, different signature schemes are available,
+please refer to the :ref:`Build Options` for more details.
+
+The certificates are categorised as "Key" and "Content" certificates. Key
+certificates are used to verify public keys which have been used to sign content
+certificates. Content certificates are used to store the hash of a boot loader
+image. An image can be authenticated by calculating its hash and matching it
+with the hash extracted from the content certificate. Various hash algorithms
+are supported to calculate all hashes, please refer to the :ref:`Build Options`
+for more details.. The public keys and hashes are included as non-standard
+extension fields in the `X.509 v3`_ certificates.
+
+The keys used to establish the CoT are:
+
+- **Root of trust key**
+
+ The private part of this key is used to sign the BL2 content certificate and
+ the trusted key certificate. The public part is the ROTPK.
+
+- **Trusted world key**
+
+ The private part is used to sign the key certificates corresponding to the
+ secure world images (SCP_BL2, BL31 and BL32). The public part is stored in
+ one of the extension fields in the trusted world certificate.
+
+- **Non-trusted world key**
+
+ The private part is used to sign the key certificate corresponding to the
+ non secure world image (BL33). The public part is stored in one of the
+ extension fields in the trusted world certificate.
+
+- **BL3X keys**
+
+ For each of SCP_BL2, BL31, BL32 and BL33, the private part is used to
+ sign the content certificate for the BL3X image. The public part is stored
+ in one of the extension fields in the corresponding key certificate.
+
+The following images are included in the CoT:
+
+- BL1
+- BL2
+- SCP_BL2 (optional)
+- BL31
+- BL33
+- BL32 (optional)
+
+The following certificates are used to authenticate the images.
+
+- **BL2 content certificate**
+
+ It is self-signed with the private part of the ROT key. It contains a hash
+ of the BL2 image.
+
+- **Trusted key certificate**
+
+ It is self-signed with the private part of the ROT key. It contains the
+ public part of the trusted world key and the public part of the non-trusted
+ world key.
+
+- **SCP_BL2 key certificate**
+
+ It is self-signed with the trusted world key. It contains the public part of
+ the SCP_BL2 key.
+
+- **SCP_BL2 content certificate**
+
+ It is self-signed with the SCP_BL2 key. It contains a hash of the SCP_BL2
+ image.
+
+- **BL31 key certificate**
+
+ It is self-signed with the trusted world key. It contains the public part of
+ the BL31 key.
+
+- **BL31 content certificate**
+
+ It is self-signed with the BL31 key. It contains a hash of the BL31 image.
+
+- **BL32 key certificate**
+
+ It is self-signed with the trusted world key. It contains the public part of
+ the BL32 key.
+
+- **BL32 content certificate**
+
+ It is self-signed with the BL32 key. It contains a hash of the BL32 image.
+
+- **BL33 key certificate**
+
+ It is self-signed with the non-trusted world key. It contains the public
+ part of the BL33 key.
+
+- **BL33 content certificate**
+
+ It is self-signed with the BL33 key. It contains a hash of the BL33 image.
+
+The SCP_BL2 and BL32 certificates are optional, but they must be present if the
+corresponding SCP_BL2 or BL32 images are present.
+
+Trusted Board Boot Sequence
+---------------------------
+
+The CoT is verified through the following sequence of steps. The system panics
+if any of the steps fail.
+
+- BL1 loads and verifies the BL2 content certificate. The issuer public key is
+ read from the verified certificate. A hash of that key is calculated and
+ compared with the hash of the ROTPK read from the trusted root-key storage
+ registers. If they match, the BL2 hash is read from the certificate.
+
+ .. note::
+ The matching operation is platform specific and is currently
+ unimplemented on the Arm development platforms.
+
+- BL1 loads the BL2 image. Its hash is calculated and compared with the hash
+ read from the certificate. Control is transferred to the BL2 image if all
+ the comparisons succeed.
+
+- BL2 loads and verifies the trusted key certificate. The issuer public key is
+ read from the verified certificate. A hash of that key is calculated and
+ compared with the hash of the ROTPK read from the trusted root-key storage
+ registers. If the comparison succeeds, BL2 reads and saves the trusted and
+ non-trusted world public keys from the verified certificate.
+
+The next two steps are executed for each of the SCP_BL2, BL31 & BL32 images.
+The steps for the optional SCP_BL2 and BL32 images are skipped if these images
+are not present.
+
+- BL2 loads and verifies the BL3x key certificate. The certificate signature
+ is verified using the trusted world public key. If the signature
+ verification succeeds, BL2 reads and saves the BL3x public key from the
+ certificate.
+
+- BL2 loads and verifies the BL3x content certificate. The signature is
+ verified using the BL3x public key. If the signature verification succeeds,
+ BL2 reads and saves the BL3x image hash from the certificate.
+
+The next two steps are executed only for the BL33 image.
+
+- BL2 loads and verifies the BL33 key certificate. If the signature
+ verification succeeds, BL2 reads and saves the BL33 public key from the
+ certificate.
+
+- BL2 loads and verifies the BL33 content certificate. If the signature
+ verification succeeds, BL2 reads and saves the BL33 image hash from the
+ certificate.
+
+The next step is executed for all the boot loader images.
+
+- BL2 calculates the hash of each image. It compares it with the hash obtained
+ from the corresponding content certificate. The image authentication succeeds
+ if the hashes match.
+
+The Trusted Board Boot implementation spans both generic and platform-specific
+BL1 and BL2 code, and in tool code on the host build machine. The feature is
+enabled through use of specific build flags as described in
+:ref:`Build Options`.
+
+On the host machine, a tool generates the certificates, which are included in
+the FIP along with the boot loader images. These certificates are loaded in
+Trusted SRAM using the IO storage framework. They are then verified by an
+Authentication module included in TF-A.
+
+The mechanism used for generating the FIP and the Authentication module are
+described in the following sections.
+
+Authentication Framework
+------------------------
+
+The authentication framework included in TF-A provides support to implement
+the desired trusted boot sequence. Arm platforms use this framework to
+implement the boot requirements specified in the
+`Trusted Board Boot Requirements (TBBR)`_ document.
+
+More information about the authentication framework can be found in the
+:ref:`Authentication Framework & Chain of Trust` document.
+
+Certificate Generation Tool
+---------------------------
+
+The ``cert_create`` tool is built and runs on the host machine as part of the
+TF-A build process when ``GENERATE_COT=1``. It takes the boot loader images
+and keys as inputs (keys must be in PEM format) and generates the
+certificates (in DER format) required to establish the CoT. New keys can be
+generated by the tool in case they are not provided. The certificates are then
+passed as inputs to the ``fiptool`` utility for creating the FIP.
+
+The certificates are also stored individually in the output build directory.
+
+The tool resides in the ``tools/cert_create`` directory. It uses the OpenSSL SSL
+library version to generate the X.509 certificates. The specific version of the
+library that is required is given in the :ref:`Prerequisites` document.
+
+Instructions for building and using the tool can be found at
+:ref:`tools_build_cert_create`.
+
+Authenticated Encryption Framework
+----------------------------------
+
+The authenticated encryption framework included in TF-A provides support to
+implement the optional firmware encryption feature. This feature can be
+optionally enabled on platforms to implement the optional requirement:
+R060_TBBR_FUNCTION as specified in the `Trusted Board Boot Requirements (TBBR)`_
+document.
+
+Firmware Encryption Tool
+------------------------
+
+The ``encrypt_fw`` tool is built and runs on the host machine as part of the
+TF-A build process when ``DECRYPTION_SUPPORT != none``. It takes the plain
+firmware image as input and generates the encrypted firmware image which can
+then be passed as input to the ``fiptool`` utility for creating the FIP.
+
+The encrypted firmwares are also stored individually in the output build
+directory.
+
+The tool resides in the ``tools/encrypt_fw`` directory. It uses OpenSSL SSL
+library version 1.0.1 or later to do authenticated encryption operation.
+Instructions for building and using the tool can be found in the
+:ref:`tools_build_enctool`.
+
+--------------
+
+*Copyright (c) 2015-2020, Arm Limited and Contributors. All rights reserved.*
+
+.. _X.509 v3: https://tools.ietf.org/rfc/rfc5280.txt
+.. _Trusted Board Boot Requirements (TBBR): https://developer.arm.com/docs/den0006/latest/trusted-board-boot-requirements-client-tbbr-client-armv8-a