Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 475 insertions, 0 deletions

diff --git a/drivers/imx/uart/imx_crash_uart.S b/drivers/imx/uart/imx_crash_uart.S
new file mode 100644
index 0000000..aa987b3
--- /dev/null
+++ b/drivers/imx/uart/imx_crash_uart.S
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) Linaro 2018 Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <arch.h>
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <imx_uart.h>
+#include <platform_def.h>
+
+	.globl	imx_crash_uart_init
+	.globl	imx_crash_uart_putc
+
+	/* -----------------------------------------------
+	 * int imx_crash_uart_init(uintptr_t base_addr,
+	 * unsigned int uart_clk, unsigned int baud_rate)
+	 * Function to initialize the console without a
+	 * C Runtime to print debug information. This
+	 * function will be accessed by console_init and
+	 * crash reporting.
+	 * In: r0 - console base address
+	 *     r1 - Uart clock in Hz
+	 *     r2 - Baud rate
+	 * Out: return 1 on success else 0 on error
+	 * Clobber list : r1, r2, r3, r4
+	 * -----------------------------------------------
+	 */
+func imx_crash_uart_init
+	/* Free up r1 as a scratch reg */
+	mov     r4, r0
+	mov     r0, r1
+
+	/* Reset UART via CR2 */
+	add     r1, r4, #IMX_UART_CR2_OFFSET
+	movs    r3, #0
+	str     r3, [r4, #IMX_UART_CR2_OFFSET]
+
+	/* Wait for reset complete */
+__wait_cr2_reset:
+	ldr     r3, [r1, #0]
+	ands    r3, #IMX_UART_CR2_SRST
+	beq     __wait_cr2_reset
+
+	/* Enable UART */
+	movs    r3, #IMX_UART_CR1_UARTEN
+	mov     r1, r2
+	str     r3, [r4, #IMX_UART_CR1_OFFSET]
+
+	/*
+	 * Ignore RTC/CTS - disable reset
+	 * Magic value #16423 =>
+	 * IMX_UART_CR2_IRTS | IMX_UART_CR2_WS | IMX_UART_CR2_TXEN | IMX_UART_CR2_RXEN | IMX_UART_CR2_SRST
+	 */
+	movw    r3, #16423
+	str     r3, [r4, #IMX_UART_CR2_OFFSET]
+
+	/*
+	 * No parity, autobaud detect-old, rxdmuxsel=1 (fixed i.mx7)
+	 * Magic value => #132
+	 * IMX_UART_CR3_ADNIMP | IMX_UART_CR3_RXDMUXSEL
+	 */
+	movs    r3, #132
+	str     r3, [r4, #IMX_UART_CR3_OFFSET]
+
+	/*
+	 * Set CTS FIFO trigger to 32 bytes bits 15:10
+	 * Magic value => #32768
+	 * FIFO trigger bitmask 100000
+	 * */
+	mov     r3, #32768
+	str     r3, [r4, #IMX_UART_CR4_OFFSET]
+
+	/*
+	 * TX/RX-thresh = 2 bytes, DCE (bit6 = 0), refclk @24MHz / 4
+	 * Magic value #2562
+	 * IMX_UART_FCR_TXTL(TX_RX_THRESH) | IMX_UART_FCR_RXTL(TX_RX_THRESH) | IMX_UART_FCR_RFDIV2
+	 */
+	#ifdef IMX_UART_DTE
+	movw    r3, #2626
+	#else
+	movw    r3, #2562
+	#endif
+	str     r3, [r4, #IMX_UART_FCR_OFFSET]
+
+	/* This BIR should be set to 0x0F prior to writing the BMR */
+	movs    r3, #15
+	str     r3, [r4, #IMX_UART_BIR_OFFSET]
+
+	/* Hard-code to 115200 @ 24 MHz */
+	movs	r0, #104
+	str     r0, [r4, #IMX_UART_BMR_OFFSET]
+
+	/* Indicate success */
+	movs    r0, #1
+	bx	lr
+endfunc imx_crash_uart_init
+
+	/* --------------------------------------------------------
+	 * int imx_crash_uart_putc(int c, uintptr_t base_addr)
+	 * Function to output a character over the console. It
+	 * returns the character printed on success or -1 on error.
+	 * In : r0 - character to be printed
+	 *      r1 - console base address
+	 * Out : return -1 on error else return character.
+	 * Clobber list : r2
+	 * --------------------------------------------------------
+	 */
+func imx_crash_uart_putc
+	/* Output specified character to UART shift-register */
+	str	r0, [r1, #IMX_UART_TXD_OFFSET]
+
+        /* Wait for transmit IMX_UART_STAT2_OFFSET.IMX_UART_STAT2_TXDC == 1 */
+__putc_spin_ready:
+	ldr	r2, [r1, #IMX_UART_STAT2_OFFSET]
+	ands	r2, #IMX_UART_STAT2_TXDC
+	beq	__putc_spin_ready
+
+        /* Transmit complete do we need to fixup \n to \n\r */
+	cmp	r0, #10
+	beq	__putc_fixup_lf
+
+	/* No fixup necessary - exit here */
+	movs	r0, #0
+	bx	lr
+
+	/* Fixup \n to \n\r */
+__putc_fixup_lf:
+	movs	r0, #13
+	b	imx_crash_uart_putc
+endfunc imx_crash_uart_putc
diff --git a/drivers/imx/uart/imx_uart.c b/drivers/imx/uart/imx_uart.c
new file mode 100644
index 0000000..dfe2e92
--- /dev/null
+++ b/drivers/imx/uart/imx_uart.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) Linaro 2018 Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <platform_def.h>
+
+#include <arch.h>
+#include <lib/mmio.h>
+
+#include <imx_uart.h>
+
+/* TX/RX FIFO threshold */
+#define TX_RX_THRESH 2
+
+struct clk_div_factors {
+	uint32_t fcr_div;
+	uint32_t bmr_div;
+};
+
+static struct clk_div_factors clk_div[] = {
+	{
+		.fcr_div = IMX_UART_FCR_RFDIV1,
+		.bmr_div = 1,
+	},
+	{
+		.fcr_div = IMX_UART_FCR_RFDIV2,
+		.bmr_div = 2,
+	},
+	{
+		.fcr_div = IMX_UART_FCR_RFDIV3,
+		.bmr_div = 3,
+	},
+	{
+		.fcr_div = IMX_UART_FCR_RFDIV4,
+		.bmr_div = 4,
+	},
+	{
+		.fcr_div = IMX_UART_FCR_RFDIV5,
+		.bmr_div = 5,
+	},
+	{
+		.fcr_div = IMX_UART_FCR_RFDIV6,
+		.bmr_div = 6,
+	},
+	{
+		.fcr_div = IMX_UART_FCR_RFDIV7,
+		.bmr_div = 7,
+	},
+};
+
+static void write_reg(uintptr_t base, uint32_t offset, uint32_t val)
+{
+	mmio_write_32(base + offset, val);
+}
+
+static uint32_t read_reg(uintptr_t base, uint32_t offset)
+{
+	return mmio_read_32(base + offset);
+}
+
+int console_imx_uart_core_init(uintptr_t base_addr, unsigned int uart_clk,
+			       unsigned int baud_rate)
+{
+	uint32_t val;
+	uint8_t clk_idx = 1;
+
+	/* Reset UART */
+	write_reg(base_addr, IMX_UART_CR2_OFFSET, 0);
+	do {
+		val = read_reg(base_addr, IMX_UART_CR2_OFFSET);
+	} while (!(val & IMX_UART_CR2_SRST));
+
+	/* Enable UART */
+	write_reg(base_addr, IMX_UART_CR1_OFFSET, IMX_UART_CR1_UARTEN);
+
+	/* Ignore RTS, 8N1, enable tx/rx, disable reset */
+	val = (IMX_UART_CR2_IRTS | IMX_UART_CR2_WS | IMX_UART_CR2_TXEN |
+	       IMX_UART_CR2_RXEN | IMX_UART_CR2_SRST);
+	write_reg(base_addr, IMX_UART_CR2_OFFSET, val);
+
+	/* No parity, autobaud detect-old, rxdmuxsel=1 (fixed i.mx7) */
+	val = IMX_UART_CR3_ADNIMP | IMX_UART_CR3_RXDMUXSEL;
+	write_reg(base_addr, IMX_UART_CR3_OFFSET, val);
+
+	/* Set CTS FIFO trigger to 32 bytes bits 15:10 */
+	write_reg(base_addr, IMX_UART_CR4_OFFSET, 0x8000);
+
+	/* TX/RX-thresh = 2 bytes, DTE (bit6 = 0), refclk @24MHz / 4 */
+	val = IMX_UART_FCR_TXTL(TX_RX_THRESH) | IMX_UART_FCR_RXTL(TX_RX_THRESH) |
+	      clk_div[clk_idx].fcr_div;
+	#ifdef IMX_UART_DTE
+		/* Set DTE (bit6 = 1) */
+		val |= IMX_UART_FCR_DCEDTE;
+	#endif
+	write_reg(base_addr, IMX_UART_FCR_OFFSET, val);
+
+	/*
+	 * The equation for BAUD rate calculation is
+	 * RefClk = Supplied clock / FCR_DIVx
+	 *
+	 * BAUD  =    Refclk
+	 *         ------------
+	 *       16 x (UBMR + 1/ UBIR + 1)
+	 *
+	 * We write 0x0f into UBIR to remove the 16 mult
+	 * BAUD  =    6000000
+	 *         ------------
+	 *       16 x (UBMR + 1/ 15 + 1)
+	 */
+
+	write_reg(base_addr, IMX_UART_BIR_OFFSET, 0x0f);
+	val = ((uart_clk / clk_div[clk_idx].bmr_div) / baud_rate) - 1;
+	write_reg(base_addr, IMX_UART_BMR_OFFSET, val);
+
+	return 0;
+}
+
+/* --------------------------------------------------------
+ * int console_core_putc(int c, uintptr_t base_addr)
+ * Function to output a character over the console. It
+ * returns the character printed on success or -1 on error.
+ * In : r0 - character to be printed
+ *      r1 - console base address
+ * Out : return -1 on error else return character.
+ * Clobber list : r2
+ * --------------------------------------------------------
+ */
+int console_imx_uart_core_putc(int c, uintptr_t base_addr)
+{
+	uint32_t val;
+
+	if (c == '\n')
+		console_imx_uart_core_putc('\r', base_addr);
+
+	/* Write data */
+	write_reg(base_addr, IMX_UART_TXD_OFFSET, c);
+
+	/* Wait for transmit */
+	do {
+		val = read_reg(base_addr, IMX_UART_STAT2_OFFSET);
+	} while (!(val & IMX_UART_STAT2_TXDC));
+
+	return 0;
+}
+
+/*
+ * Function to get a character from the console.
+ * It returns the character grabbed on success
+ * or -1 on error.
+ * In : r0 - console base address
+ * Clobber list : r0, r1
+ * ---------------------------------------------
+ */
+int console_imx_uart_core_getc(uintptr_t base_addr)
+{
+	uint32_t val;
+
+	val = read_reg(base_addr, IMX_UART_TS_OFFSET);
+	if (val & IMX_UART_TS_RXEMPTY)
+		return -1;
+
+	val = read_reg(base_addr, IMX_UART_RXD_OFFSET);
+	return (int)(val & 0x000000FF);
+}
+
+/*
+ * Function to force a write of all buffered
+ * data that hasn't been output.
+ * In : r0 - console base address
+ * Out : void
+ * Clobber list : r0, r1
+ * ---------------------------------------------
+ */
+void console_imx_uart_core_flush(uintptr_t base_addr)
+{
+}
+
diff --git a/drivers/imx/uart/imx_uart.h b/drivers/imx/uart/imx_uart.h
new file mode 100644
index 0000000..a133024
--- /dev/null
+++ b/drivers/imx/uart/imx_uart.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) Linaro 2018 Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef IMX_UART_H
+#define IMX_UART_H
+
+#include <drivers/console.h>
+
+#define IMX_UART_RXD_OFFSET	0x00
+#define IMX_UART_RXD_CHARRDY	BIT(15)
+#define IMX_UART_RXD_ERR	BIT(14)
+#define IMX_UART_RXD_OVERRUN	BIT(13)
+#define IMX_UART_RXD_FRMERR	BIT(12)
+#define IMX_UART_RXD_BRK	BIT(11)
+#define IMX_UART_RXD_PRERR	BIT(10)
+
+#define IMX_UART_TXD_OFFSET	0x40
+
+#define IMX_UART_CR1_OFFSET	0x80
+#define IMX_UART_CR1_ADEN	BIT(15)
+#define IMX_UART_CR1_ADBR	BIT(14)
+#define IMX_UART_CR1_TRDYEN	BIT(13)
+#define IMX_UART_CR1_IDEN	BIT(12)
+#define IMX_UART_CR1_RRDYEN	BIT(9)
+#define IMX_UART_CR1_RXDMAEN	BIT(8)
+#define IMX_UART_CR1_IREN	BIT(7)
+#define IMX_UART_CR1_TXMPTYEN	BIT(6)
+#define IMX_UART_CR1_RTSDEN	BIT(5)
+#define IMX_UART_CR1_SNDBRK	BIT(4)
+#define IMX_UART_CR1_TXDMAEN	BIT(3)
+#define IMX_UART_CR1_ATDMAEN	BIT(2)
+#define IMX_UART_CR1_DOZE	BIT(1)
+#define IMX_UART_CR1_UARTEN	BIT(0)
+
+#define IMX_UART_CR2_OFFSET	0x84
+#define IMX_UART_CR2_ESCI	BIT(15)
+#define IMX_UART_CR2_IRTS	BIT(14)
+#define IMX_UART_CR2_CTSC	BIT(13)
+#define IMX_UART_CR2_CTS	BIT(12)
+#define IMX_UART_CR2_ESCEN	BIT(11)
+#define IMX_UART_CR2_PREN	BIT(8)
+#define IMX_UART_CR2_PROE	BIT(7)
+#define IMX_UART_CR2_STPB	BIT(6)
+#define IMX_UART_CR2_WS		BIT(5)
+#define IMX_UART_CR2_RTSEN	BIT(4)
+#define IMX_UART_CR2_ATEN	BIT(3)
+#define IMX_UART_CR2_TXEN	BIT(2)
+#define IMX_UART_CR2_RXEN	BIT(1)
+#define IMX_UART_CR2_SRST	BIT(0)
+
+#define IMX_UART_CR3_OFFSET	0x88
+#define IMX_UART_CR3_DTREN	BIT(13)
+#define IMX_UART_CR3_PARERREN	BIT(12)
+#define IMX_UART_CR3_FARERREN	BIT(11)
+#define IMX_UART_CR3_DSD	BIT(10)
+#define IMX_UART_CR3_DCD	BIT(9)
+#define IMX_UART_CR3_RI		BIT(8)
+#define IMX_UART_CR3_ADNIMP	BIT(7)
+#define IMX_UART_CR3_RXDSEN	BIT(6)
+#define IMX_UART_CR3_AIRINTEN	BIT(5)
+#define IMX_UART_CR3_AWAKEN	BIT(4)
+#define IMX_UART_CR3_DTRDEN	BIT(3)
+#define IMX_UART_CR3_RXDMUXSEL	BIT(2)
+#define IMX_UART_CR3_INVT	BIT(1)
+#define IMX_UART_CR3_ACIEN	BIT(0)
+
+#define IMX_UART_CR4_OFFSET	0x8c
+#define IMX_UART_CR4_INVR	BIT(9)
+#define IMX_UART_CR4_ENIRI	BIT(8)
+#define IMX_UART_CR4_WKEN	BIT(7)
+#define IMX_UART_CR4_IDDMAEN	BIT(6)
+#define IMX_UART_CR4_IRSC	BIT(5)
+#define IMX_UART_CR4_LPBYP	BIT(4)
+#define IMX_UART_CR4_TCEN	BIT(3)
+#define IMX_UART_CR4_BKEN	BIT(2)
+#define IMX_UART_CR4_OREN	BIT(1)
+#define IMX_UART_CR4_DREN	BIT(0)
+
+#define IMX_UART_FCR_OFFSET	0x90
+#define IMX_UART_FCR_TXTL_MASK	(BIT(15) | BIT(14) | BIT(13) | BIT(12) |\
+				 BIT(11) | BIT(10))
+#define IMX_UART_FCR_TXTL(x)	((x) << 10)
+#define IMX_UART_FCR_RFDIV_MASK	(BIT(9) | BIT(8) | BIT(7))
+#define IMX_UART_FCR_RFDIV7	(BIT(9) | BIT(8))
+#define IMX_UART_FCR_RFDIV1	(BIT(9) | BIT(7))
+#define IMX_UART_FCR_RFDIV2	BIT(9)
+#define IMX_UART_FCR_RFDIV3	(BIT(8) | BIT(7))
+#define IMX_UART_FCR_RFDIV4	BIT(8)
+#define IMX_UART_FCR_RFDIV5	BIT(7)
+#define IMX_UART_FCR_RFDIV6	0
+#define IMX_UART_FCR_DCEDTE	BIT(6)
+#define IMX_UART_FCR_RXTL_MASK	(BIT(5) | BIT(4) | BIT(3) | BIT(2) |\
+				 BIT(1) | BIT(0))
+#define IMX_UART_FCR_RXTL(x)	x
+
+#define IMX_UART_STAT1_OFFSET	0x94
+#define IMX_UART_STAT1_PARITYERR	BIT(15)
+#define IMX_UART_STAT1_RTSS	BIT(14)
+#define IMX_UART_STAT1_TRDY	BIT(13)
+#define IMX_UART_STAT1_RTSD	BIT(12)
+#define IMX_UART_STAT1_ESCF	BIT(11)
+#define IMX_UART_STAT1_FRAMEERR	BIT(10)
+#define IMX_UART_STAT1_RRDY	BIT(9)
+#define IMX_UART_STAT1_AGTIM	BIT(8)
+#define IMX_UART_STAT1_DTRD	BIT(7)
+#define IMX_UART_STAT1_RXDS	BIT(6)
+#define IMX_UART_STAT1_AIRINT	BIT(5)
+#define IMX_UART_STAT1_AWAKE	BIT(4)
+#define IMX_UART_STAT1_SAD	BIT(3)
+
+#define IMX_UART_STAT2_OFFSET	0x98
+#define IMX_UART_STAT2_ADET	BIT(15)
+#define IMX_UART_STAT2_TXFE	BIT(14)
+#define IMX_UART_STAT2_DTRF	BIT(13)
+#define IMX_UART_STAT2_IDLE	BIT(12)
+#define IMX_UART_STAT2_ACST	BIT(11)
+#define IMX_UART_STAT2_RIDELT	BIT(10)
+#define IMX_UART_STAT2_RIIN	BIT(9)
+#define IMX_UART_STAT2_IRINT	BIT(8)
+#define IMX_UART_STAT2_WAKE	BIT(7)
+#define IMX_UART_STAT2_DCDDELT	BIT(6)
+#define IMX_UART_STAT2_DCDIN	BIT(5)
+#define IMX_UART_STAT2_RTSF	BIT(4)
+#define IMX_UART_STAT2_TXDC	BIT(3)
+#define IMX_UART_STAT2_BRCD	BIT(2)
+#define IMX_UART_STAT2_ORE	BIT(1)
+#define IMX_UART_STAT2_RCR	BIT(0)
+
+#define IMX_UART_ESC_OFFSET	0x9c
+
+#define IMX_UART_TIM_OFFSET	0xa0
+
+#define IMX_UART_BIR_OFFSET	0xa4
+
+#define IMX_UART_BMR_OFFSET	0xa8
+
+#define IMX_UART_BRC_OFFSET	0xac
+
+#define IMX_UART_ONEMS_OFFSET	0xb0
+
+#define IMX_UART_TS_OFFSET	0xb4
+#define IMX_UART_TS_FRCPERR	BIT(13)
+#define IMX_UART_TS_LOOP	BIT(12)
+#define IMX_UART_TS_DBGEN	BIT(11)
+#define IMX_UART_TS_LOOPIR	BIT(10)
+#define IMX_UART_TS_RXDBG	BIT(9)
+#define IMX_UART_TS_TXEMPTY	BIT(6)
+#define IMX_UART_TS_RXEMPTY	BIT(5)
+#define IMX_UART_TS_TXFULL	BIT(4)
+#define IMX_UART_TS_RXFULL	BIT(3)
+#define IMX_UART_TS_SOFTRST	BIT(0)
+
+#ifndef __ASSEMBLER__
+
+int console_imx_uart_register(uintptr_t baseaddr,
+			      uint32_t clock,
+			      uint32_t baud,
+			      console_t *console);
+#endif /*__ASSEMBLER__*/
+
+#endif /* IMX_UART_H */