Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 167 insertions, 0 deletions

diff --git a/drivers/marvell/comphy/phy-comphy-common.h b/drivers/marvell/comphy/phy-comphy-common.h
new file mode 100644
index 0000000..ba5d255
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-common.h
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Marvell CP110 ana A3700 common */
+
+#ifndef PHY_COMPHY_COMMON_H
+#define PHY_COMPHY_COMMON_H
+
+/* #define DEBUG_COMPHY */
+#ifdef DEBUG_COMPHY
+#define debug(format...) printf(format)
+#else
+#define debug(format, arg...)
+#endif
+
+/* A lane is described by 4 fields:
+ *  - bit 1~0 represent comphy polarity invert
+ *  - bit 7~2 represent comphy speed
+ *  - bit 11~8 represent unit index
+ *  - bit 16~12 represent mode
+ *  - bit 17 represent comphy indication of clock source
+ *  - bit 20~18 represents pcie width (in case of pcie comphy config.)
+ *  - bit 21 represents the source of the request (Linux/Bootloader),
+ *           (reguired only for PCIe!)
+ *  - bit 31~22 reserved
+ */
+
+#define COMPHY_INVERT_OFFSET	0
+#define COMPHY_INVERT_LEN	2
+#define COMPHY_INVERT_MASK	COMPHY_MASK(COMPHY_INVERT_OFFSET, \
+						COMPHY_INVERT_LEN)
+#define COMPHY_SPEED_OFFSET	(COMPHY_INVERT_OFFSET + COMPHY_INVERT_LEN)
+#define COMPHY_SPEED_LEN	6
+#define COMPHY_SPEED_MASK	COMPHY_MASK(COMPHY_SPEED_OFFSET, \
+						COMPHY_SPEED_LEN)
+#define COMPHY_UNIT_ID_OFFSET	(COMPHY_SPEED_OFFSET + COMPHY_SPEED_LEN)
+#define COMPHY_UNIT_ID_LEN	4
+#define COMPHY_UNIT_ID_MASK	COMPHY_MASK(COMPHY_UNIT_ID_OFFSET, \
+						COMPHY_UNIT_ID_LEN)
+#define COMPHY_MODE_OFFSET	(COMPHY_UNIT_ID_OFFSET + COMPHY_UNIT_ID_LEN)
+#define COMPHY_MODE_LEN		5
+#define COMPHY_MODE_MASK	COMPHY_MASK(COMPHY_MODE_OFFSET, COMPHY_MODE_LEN)
+#define COMPHY_CLK_SRC_OFFSET	(COMPHY_MODE_OFFSET + COMPHY_MODE_LEN)
+#define COMPHY_CLK_SRC_LEN	1
+#define COMPHY_CLK_SRC_MASK	COMPHY_MASK(COMPHY_CLK_SRC_OFFSET, \
+						COMPHY_CLK_SRC_LEN)
+#define COMPHY_PCI_WIDTH_OFFSET	(COMPHY_CLK_SRC_OFFSET + COMPHY_CLK_SRC_LEN)
+#define COMPHY_PCI_WIDTH_LEN	3
+#define COMPHY_PCI_WIDTH_MASK	COMPHY_MASK(COMPHY_PCI_WIDTH_OFFSET, \
+						COMPHY_PCI_WIDTH_LEN)
+#define COMPHY_PCI_CALLER_OFFSET \
+			(COMPHY_PCI_WIDTH_OFFSET + COMPHY_PCI_WIDTH_LEN)
+#define COMPHY_PCI_CALLER_LEN	1
+#define COMPHY_PCI_CALLER_MASK	COMPHY_MASK(COMPHY_PCI_CALLER_OFFSET, \
+						COMPHY_PCI_CALLER_LEN)
+
+#define COMPHY_MASK(offset, len)	(((1 << (len)) - 1) << (offset))
+
+/* Macro which extracts mode from lane description */
+#define COMPHY_GET_MODE(x)		(((x) & COMPHY_MODE_MASK) >> \
+						COMPHY_MODE_OFFSET)
+/* Macro which extracts unit index from lane description */
+#define COMPHY_GET_ID(x)		(((x) & COMPHY_UNIT_ID_MASK) >> \
+						COMPHY_UNIT_ID_OFFSET)
+/* Macro which extracts speed from lane description */
+#define COMPHY_GET_SPEED(x)		(((x) & COMPHY_SPEED_MASK) >> \
+						COMPHY_SPEED_OFFSET)
+/* Macro which extracts clock source indication from lane description */
+#define COMPHY_GET_CLK_SRC(x)		(((x) & COMPHY_CLK_SRC_MASK) >> \
+						COMPHY_CLK_SRC_OFFSET)
+/* Macro which extracts pcie width indication from lane description */
+#define COMPHY_GET_PCIE_WIDTH(x)	(((x) & COMPHY_PCI_WIDTH_MASK) >> \
+						COMPHY_PCI_WIDTH_OFFSET)
+
+/* Macro which extracts the caller for pcie power on from lane description */
+#define COMPHY_GET_CALLER(x)		(((x) & COMPHY_PCI_CALLER_MASK) >> \
+						COMPHY_PCI_CALLER_OFFSET)
+
+/* Macro which extracts the polarity invert from lane description */
+#define COMPHY_GET_POLARITY_INVERT(x)	(((x) & COMPHY_INVERT_MASK) >> \
+						COMPHY_INVERT_OFFSET)
+
+
+#define COMPHY_SATA_MODE	0x1
+#define COMPHY_SGMII_MODE	0x2	/* SGMII 1G */
+#define COMPHY_2500BASEX_MODE	0x3	/* 2500Base-X */
+#define COMPHY_USB3H_MODE	0x4
+#define COMPHY_USB3D_MODE	0x5
+#define COMPHY_PCIE_MODE	0x6
+#define COMPHY_RXAUI_MODE	0x7
+#define COMPHY_XFI_MODE		0x8
+#define COMPHY_SFI_MODE		0x9
+#define COMPHY_USB3_MODE	0xa
+#define COMPHY_AP_MODE		0xb
+
+#define	COMPHY_UNUSED		0xFFFFFFFF
+
+/* Polarity invert macro */
+#define COMPHY_POLARITY_NO_INVERT	0
+#define COMPHY_POLARITY_TXD_INVERT	1
+#define COMPHY_POLARITY_RXD_INVERT	2
+#define COMPHY_POLARITY_ALL_INVERT	(COMPHY_POLARITY_TXD_INVERT | \
+					 COMPHY_POLARITY_RXD_INVERT)
+
+enum reg_width_type {
+	REG_16BIT = 0,
+	REG_32BIT,
+};
+
+enum {
+	COMPHY_LANE0 = 0,
+	COMPHY_LANE1,
+	COMPHY_LANE2,
+	COMPHY_LANE3,
+	COMPHY_LANE4,
+	COMPHY_LANE5,
+	COMPHY_LANE_MAX,
+};
+
+static inline uint32_t polling_with_timeout(uintptr_t addr, uint32_t val,
+					    uint32_t mask,
+					    uint32_t usec_timeout,
+					    enum reg_width_type type)
+{
+	uint32_t data;
+
+	do {
+		udelay(1);
+		if (type == REG_16BIT)
+			data = mmio_read_16(addr) & mask;
+		else
+			data = mmio_read_32(addr) & mask;
+	} while (data != val  && --usec_timeout > 0);
+
+	if (usec_timeout == 0)
+		return data;
+
+	return 0;
+}
+
+static inline void reg_set(uintptr_t addr, uint32_t data, uint32_t mask)
+{
+	debug("<atf>: WR to addr = 0x%lx, data = 0x%x (mask = 0x%x) - ",
+	      addr, data, mask);
+	debug("old value = 0x%x ==> ", mmio_read_32(addr));
+	mmio_clrsetbits_32(addr, mask, data & mask);
+
+	debug("new val 0x%x\n", mmio_read_32(addr));
+}
+
+static inline void __unused reg_set16(uintptr_t addr, uint16_t data,
+				      uint16_t mask)
+{
+
+	debug("<atf>: WR to addr = 0x%lx, data = 0x%x (mask = 0x%x) - ",
+	      addr, data, mask);
+	debug("old value = 0x%x ==> ", mmio_read_16(addr));
+	mmio_clrsetbits_16(addr, mask, data & mask);
+
+	debug("new val 0x%x\n", mmio_read_16(addr));
+}
+
+#endif /* PHY_COMPHY_COMMON_H */