summaryrefslogtreecommitdiffstats
path: root/fdts
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-28 09:13:47 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-28 09:13:47 +0000
commit102b0d2daa97dae68d3eed54d8fe37a9cc38a892 (patch)
treebcf648efac40ca6139842707f0eba5a4496a6dd2 /fdts
parentInitial commit. (diff)
downloadarm-trusted-firmware-102b0d2daa97dae68d3eed54d8fe37a9cc38a892.tar.xz
arm-trusted-firmware-102b0d2daa97dae68d3eed54d8fe37a9cc38a892.zip
Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'fdts')
-rw-r--r--fdts/a5ds.dts158
-rw-r--r--fdts/arm_fpga.dts108
-rw-r--r--fdts/corstone700.dtsi161
-rw-r--r--fdts/corstone700_fpga.dts34
-rw-r--r--fdts/corstone700_fvp.dts40
-rw-r--r--fdts/cot_descriptors.dtsi320
-rw-r--r--fdts/fvp-base-gicv2-psci.dts18
-rw-r--r--fdts/fvp-base-gicv2.dtsi21
-rw-r--r--fdts/fvp-base-gicv3-psci-1t.dts18
-rw-r--r--fdts/fvp-base-gicv3-psci-dynamiq-2t.dts23
-rw-r--r--fdts/fvp-base-gicv3-psci-dynamiq-common.dtsi10
-rw-r--r--fdts/fvp-base-gicv3-psci-dynamiq.dts23
-rw-r--r--fdts/fvp-base-gicv3-psci.dts18
-rw-r--r--fdts/fvp-base-gicv3.dtsi31
-rw-r--r--fdts/fvp-base-psci-common.dtsi251
-rw-r--r--fdts/fvp-defs-dynamiq.dtsi289
-rw-r--r--fdts/fvp-defs.dtsi382
-rw-r--r--fdts/fvp-foundation-gicv2-psci.dts151
-rw-r--r--fdts/fvp-foundation-gicv3-psci.dts160
-rw-r--r--fdts/fvp-foundation-motherboard.dtsi184
-rw-r--r--fdts/fvp-ve-Cortex-A5x1.dts167
-rw-r--r--fdts/fvp-ve-Cortex-A7x1.dts102
-rw-r--r--fdts/juno-ethosn.dtsi76
-rw-r--r--fdts/juno.dts15
-rw-r--r--fdts/morello-fvp.dts167
-rw-r--r--fdts/morello-soc.dts268
-rw-r--r--fdts/morello.dtsi106
-rw-r--r--fdts/n1sdp-multi-chip.dts122
-rw-r--r--fdts/n1sdp-single-chip.dts92
-rw-r--r--fdts/n1sdp.dtsi210
-rw-r--r--fdts/rtsm_ve-motherboard.dtsi260
-rw-r--r--fdts/stm32mp1-cot-descriptors.dtsi156
-rw-r--r--fdts/stm32mp13-bl2.dtsi85
-rw-r--r--fdts/stm32mp13-ddr.dtsi184
-rw-r--r--fdts/stm32mp13-ddr3-1x4Gb-1066-binF.dtsi100
-rw-r--r--fdts/stm32mp13-fw-config.dtsi51
-rw-r--r--fdts/stm32mp13-pinctrl.dtsi103
-rw-r--r--fdts/stm32mp131.dtsi584
-rw-r--r--fdts/stm32mp133.dtsi7
-rw-r--r--fdts/stm32mp135.dtsi7
-rw-r--r--fdts/stm32mp135f-dk-fw-config.dts7
-rw-r--r--fdts/stm32mp135f-dk.dts331
-rw-r--r--fdts/stm32mp13xa.dtsi5
-rw-r--r--fdts/stm32mp13xc.dtsi27
-rw-r--r--fdts/stm32mp13xd.dtsi5
-rw-r--r--fdts/stm32mp13xf.dtsi26
-rw-r--r--fdts/stm32mp15-bl2.dtsi115
-rw-r--r--fdts/stm32mp15-bl32.dtsi46
-rw-r--r--fdts/stm32mp15-ddr.dtsi112
-rw-r--r--fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi107
-rw-r--r--fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi107
-rw-r--r--fdts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi108
-rw-r--r--fdts/stm32mp15-fw-config.dtsi83
-rw-r--r--fdts/stm32mp15-pinctrl.dtsi413
-rw-r--r--fdts/stm32mp151.dtsi689
-rw-r--r--fdts/stm32mp153.dtsi19
-rw-r--r--fdts/stm32mp157.dtsi7
-rw-r--r--fdts/stm32mp157a-avenger96-fw-config.dts7
-rw-r--r--fdts/stm32mp157a-avenger96.dts303
-rw-r--r--fdts/stm32mp157a-dhcor-avenger96-fw-config.dts7
-rw-r--r--fdts/stm32mp157a-dhcor-avenger96.dts24
-rw-r--r--fdts/stm32mp157a-dk1-fw-config.dts7
-rw-r--r--fdts/stm32mp157a-dk1.dts27
-rw-r--r--fdts/stm32mp157a-ed1-fw-config.dts7
-rw-r--r--fdts/stm32mp157a-ev1-fw-config.dts7
-rw-r--r--fdts/stm32mp157c-dhcom-pdk2-fw-config.dts7
-rw-r--r--fdts/stm32mp157c-dhcom-pdk2.dts26
-rw-r--r--fdts/stm32mp157c-dk2-fw-config.dts7
-rw-r--r--fdts/stm32mp157c-dk2.dts33
-rw-r--r--fdts/stm32mp157c-ed1-fw-config.dts7
-rw-r--r--fdts/stm32mp157c-ed1.dts342
-rw-r--r--fdts/stm32mp157c-ev1-fw-config.dts7
-rw-r--r--fdts/stm32mp157c-ev1.dts63
-rw-r--r--fdts/stm32mp157c-lxa-mc1-fw-config.dts7
-rw-r--r--fdts/stm32mp157c-lxa-mc1.dts93
-rw-r--r--fdts/stm32mp157c-odyssey-fw-config.dts7
-rw-r--r--fdts/stm32mp157c-odyssey-som.dtsi322
-rw-r--r--fdts/stm32mp157c-odyssey.dts40
-rw-r--r--fdts/stm32mp157d-dk1-fw-config.dts7
-rw-r--r--fdts/stm32mp157d-ed1-fw-config.dts7
-rw-r--r--fdts/stm32mp157d-ev1-fw-config.dts7
-rw-r--r--fdts/stm32mp157f-dk2-fw-config.dts7
-rw-r--r--fdts/stm32mp157f-ed1-fw-config.dts7
-rw-r--r--fdts/stm32mp157f-ev1-fw-config.dts7
-rw-r--r--fdts/stm32mp15xc.dtsi18
-rw-r--r--fdts/stm32mp15xx-dhcom-pdk2.dtsi44
-rw-r--r--fdts/stm32mp15xx-dhcom-som.dtsi336
-rw-r--r--fdts/stm32mp15xx-dhcor-avenger96.dtsi100
-rw-r--r--fdts/stm32mp15xx-dhcor-io1v8.dtsi28
-rw-r--r--fdts/stm32mp15xx-dhcor-som.dtsi286
-rw-r--r--fdts/stm32mp15xx-dkx.dtsi341
-rw-r--r--fdts/stm32mp15xx-osd32.dtsi278
-rw-r--r--fdts/stm32mp15xxaa-pinctrl.dtsi85
-rw-r--r--fdts/stm32mp15xxab-pinctrl.dtsi57
-rw-r--r--fdts/stm32mp15xxac-pinctrl.dtsi73
-rw-r--r--fdts/stm32mp15xxad-pinctrl.dtsi57
-rw-r--r--fdts/tc.dts567
97 files changed, 11131 insertions, 0 deletions
diff --git a/fdts/a5ds.dts b/fdts/a5ds.dts
new file mode 100644
index 0000000..c6f5be6
--- /dev/null
+++ b/fdts/a5ds.dts
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2019-2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+ model = "A5DS";
+ compatible = "arm,A5DS";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
+ method = "smc";
+ cpu_on = <0x84000003>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "psci";
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x7F000000>;
+ };
+
+ L2: cache-controller@1C010000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x1C010000 0x1000>;
+ interrupts = <0 84 4>;
+ cache-level = <2>;
+ cache-unified;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <1 1 1>;
+ };
+
+ refclk7500khz: refclk7500khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <7500000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ refclk24mhz: refclk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ smbclk: refclk24mhzx2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "smclk";
+ };
+
+
+ rtc@1a220000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x1a220000 0x1000>;
+ clocks = <&refclk24mhz>;
+ interrupts = <0 6 0xf04>;
+ clock-names = "apb_pclk";
+ };
+
+ gic: interrupt-controller@1c001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1c001000 0x1000>,
+ <0x1c000100 0x100>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ serial0: uart@1a200000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a200000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 8 0xf04>;
+ clocks = <&refclk7500khz>;
+ clock-names = "apb_pclk";
+ };
+
+ serial1: uart@1a210000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a210000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 9 0xf04>;
+ clocks = <&refclk7500khz>;
+ clock-names = "apb_pclk";
+ };
+
+ timer0: timer@1a040000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x1a040000 0x1000>;
+ clock-frequency = <7500000>;
+
+ frame@1a050000 {
+ frame-number = <0>;
+ interrupts = <0 2 0xf04>;
+ reg = <0x1a050000 0x1000>;
+ };
+ };
+ v2m_fixed_3v3: fixed-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ethernet@4020000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x40200000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 43 0xf04>;
+ reg-io-width = <4>;
+ phy-mode = "mii";
+ smsc,irq-active-high;
+ vdd33a-supply = <&v2m_fixed_3v3>;
+ vddvario-supply = <&v2m_fixed_3v3>;
+ };
+};
diff --git a/fdts/arm_fpga.dts b/fdts/arm_fpga.dts
new file mode 100644
index 0000000..c0efd09
--- /dev/null
+++ b/fdts/arm_fpga.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * Devicetree for the Arm Ltd. FPGA platform
+ * Number and kind of CPU cores differs from image to image, so the
+ * topology is auto-detected by BL31, and the /cpus node is created and
+ * populated accordingly at runtime.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+ model = "ARM FPGA";
+ compatible = "arm,fpga", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &dbg_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:38400n8";
+ bootargs = "console=ttyAMA0,38400n8 earlycon";
+ /* Allow to upload a generous 100MB initrd payload. */
+ linux,initrd-start = <0x0 0x84000000>;
+ linux,initrd-end = <0x0 0x8a400000>;
+ };
+
+ /* /cpus node will be added by BL31 at runtime. */
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* This node will be removed at runtime on cores without SPE. */
+ spe-pmu {
+ compatible = "arm,statistical-profiling-extension-v1";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>,
+ <0x8 0x80000000 0x1 0x80000000>;
+ };
+
+
+ bus_refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ uartclk: baudclock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <10000000>;
+ clock-output-names = "uartclk";
+ };
+
+ dbg_uart: serial@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x00001000>;
+ interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&bus_refclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ gic: interrupt-controller@30000000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ reg = <0x0 0x30000000 0x0 0x00010000>, /* GICD */
+ /* The GICR size will be adjusted at runtime to match the cores. */
+ <0x0 0x30040000 0x0 0x00020000>; /* GICR for one core */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its: msi-controller@30040000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x30040000 0x0 0x40000>;
+ #msi-cells = <1>;
+ msi-controller;
+ };
+ };
+};
diff --git a/fdts/corstone700.dtsi b/fdts/corstone700.dtsi
new file mode 100644
index 0000000..2372207
--- /dev/null
+++ b/fdts/corstone700.dtsi
@@ -0,0 +1,161 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "arm,Corstone-700";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ gic: interrupt-controller@1c000000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1c010000 0x1000>,
+ <0x1c02f000 0x2000>,
+ <0x1c04f000 0x1000>,
+ <0x1c06f000 0x2000>;
+ interrupts = <1 9 0xf08>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+
+ refclk100mhz: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ smbclk: refclk24mhzx2 {
+ /* Reference 24MHz clock x 2 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "smclk";
+ };
+
+ uartclk: uartclk {
+ /* UART clock - 32MHz */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000000>;
+ clock-output-names = "uartclk";
+ };
+
+ serial0: uart@1a510000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a510000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 19 4>;
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ serial1: uart@1a520000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a520000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 20 4>;
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ refclk: refclk@1a220000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x1a220000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@1a230000 {
+ frame-number = <0>;
+ interrupts = <0 2 0xf04>;
+ reg = <0x1a230000 0x1000>;
+ };
+ };
+
+ mbox_es0mhu0: mhu@1b000000 {
+ compatible = "arm,mhuv2","arm,primecell";
+ reg = <0x1b000000 0x1000>,
+ <0x1b010000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <0 12 4>;
+ interrupt-names = "mhu_rx";
+ #mbox-cells = <1>;
+ mbox-name = "arm-es0-mhu0";
+ };
+
+ mbox_es0mhu1: mhu@1b020000 {
+ compatible = "arm,mhuv2","arm,primecell";
+ reg = <0x1b020000 0x1000>,
+ <0x1b030000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <0 47 4>;
+ interrupt-names = "mhu_rx";
+ #mbox-cells = <1>;
+ mbox-name = "arm-es0-mhu1";
+ };
+
+ mbox_semhu1: mhu@1b820000 {
+ compatible = "arm,mhuv2","arm,primecell";
+ reg = <0x1b820000 0x1000>,
+ <0x1b830000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <0 45 4>;
+ interrupt-names = "mhu_rx";
+ #mbox-cells = <1>;
+ mbox-name = "arm-se-mhu1";
+ };
+
+ client {
+ compatible = "arm,client";
+ mboxes = <&mbox_es0mhu0 0>, <&mbox_es0mhu1 0>, <&mbox_semhu1 0>;
+ mbox-names = "es0mhu0", "es0mhu1", "semhu1";
+ };
+
+ extsys0: extsys@1A010310 {
+ compatible = "arm,extsys_ctrl";
+ reg = <0x1A010310 0x4>,
+ <0x1A010314 0x4>;
+ reg-names = "rstreg", "streg";
+ };
+};
diff --git a/fdts/corstone700_fpga.dts b/fdts/corstone700_fpga.dts
new file mode 100644
index 0000000..1ac0d4b
--- /dev/null
+++ b/fdts/corstone700_fpga.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+#include "corstone700.dtsi"
+
+/ {
+ model = "corstone700-fpga";
+
+ ethernet: eth@40100000 {
+ compatible = "smsc,lan9115";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ };
+
+ usb: usb@4020000 {
+ compatible = "nxp,usb-isp1763";
+ reg = <0x40200000 0x100000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&refclk {
+ clock-frequency = <32000000>;
+};
diff --git a/fdts/corstone700_fvp.dts b/fdts/corstone700_fvp.dts
new file mode 100644
index 0000000..3b1202d
--- /dev/null
+++ b/fdts/corstone700_fvp.dts
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+#include "corstone700.dtsi"
+
+/ {
+ model = "corstone700-fvp";
+
+ /*
+ * Intel StrataFlash J3 NOR flash: 2 x 16-bit interleaved components
+ * Flash total size: 32 MB
+ * Allocated flash space: 8 MB
+ */
+
+ flash@8500000 {
+ compatible = "cfi-flash";
+ reg = <0x8500000 0x800000>;
+ bank-width = <4>;
+ device-width= <2>;
+ };
+
+ ethernet: eth@4010000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 116 0xf04>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ };
+};
+
+&refclk {
+ clock-frequency = <50000000>;
+};
diff --git a/fdts/cot_descriptors.dtsi b/fdts/cot_descriptors.dtsi
new file mode 100644
index 0000000..411bae6
--- /dev/null
+++ b/fdts/cot_descriptors.dtsi
@@ -0,0 +1,320 @@
+/*
+ * Copyright (c) 2020, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <tools_share/tbbr_oid.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <common/nv_cntr_ids.h>
+
+cot {
+ manifests {
+ compatible = "arm, cert-descs";
+
+ trusted_boot_fw_cert: trusted_boot_fw_cert {
+ root-certificate;
+ image-id =<TRUSTED_BOOT_FW_CERT_ID>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ tb_fw_hash: tb_fw_hash {
+ oid = TRUSTED_BOOT_FW_HASH_OID;
+ };
+ tb_fw_config_hash: tb_fw_config_hash {
+ oid = TRUSTED_BOOT_FW_CONFIG_HASH_OID;
+ };
+ hw_config_hash: hw_config_hash {
+ oid = HW_CONFIG_HASH_OID;
+ };
+ fw_config_hash: fw_config_hash {
+ oid = FW_CONFIG_HASH_OID;
+ };
+ };
+
+ trusted_key_cert: trusted_key_cert {
+ root-certificate;
+ image-id = <TRUSTED_KEY_CERT_ID>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ trusted_world_pk: trusted_world_pk {
+ oid = TRUSTED_WORLD_PK_OID;
+ };
+ non_trusted_world_pk: non_trusted_world_pk {
+ oid = NON_TRUSTED_WORLD_PK_OID;
+ };
+ };
+
+ scp_fw_key_cert: scp_fw_key_cert {
+ image-id = <SCP_FW_KEY_CERT_ID>;
+ parent = <&trusted_key_cert>;
+ signing-key = <&trusted_world_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ scp_fw_content_pk: scp_fw_content_pk {
+ oid = SCP_FW_CONTENT_CERT_PK_OID;
+ };
+ };
+
+ scp_fw_content_cert: scp_fw_content_cert {
+ image-id = <SCP_FW_CONTENT_CERT_ID>;
+ parent = <&scp_fw_key_cert>;
+ signing-key = <&scp_fw_content_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ scp_fw_hash: scp_fw_hash {
+ oid = SCP_FW_HASH_OID;
+ };
+ };
+
+ soc_fw_key_cert: soc_fw_key_cert {
+ image-id = <SOC_FW_KEY_CERT_ID>;
+ parent = <&trusted_key_cert>;
+ signing-key = <&trusted_world_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+ soc_fw_content_pk: soc_fw_content_pk {
+ oid = SOC_FW_CONTENT_CERT_PK_OID;
+ };
+ };
+
+ soc_fw_content_cert: soc_fw_content_cert {
+ image-id = <SOC_FW_CONTENT_CERT_ID>;
+ parent = <&soc_fw_key_cert>;
+ signing-key = <&soc_fw_content_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ soc_fw_hash: soc_fw_hash {
+ oid = SOC_AP_FW_HASH_OID;
+ };
+ soc_fw_config_hash: soc_fw_config_hash {
+ oid = SOC_FW_CONFIG_HASH_OID;
+ };
+ };
+
+ trusted_os_fw_key_cert: trusted_os_fw_key_cert {
+ image-id = <TRUSTED_OS_FW_KEY_CERT_ID>;
+ parent = <&trusted_key_cert>;
+ signing-key = <&trusted_world_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ tos_fw_content_pk: tos_fw_content_pk {
+ oid = TRUSTED_OS_FW_CONTENT_CERT_PK_OID;
+ };
+ };
+
+ trusted_os_fw_content_cert: trusted_os_fw_content_cert {
+ image-id = <TRUSTED_OS_FW_CONTENT_CERT_ID>;
+ parent = <&trusted_os_fw_key_cert>;
+ signing-key = <&tos_fw_content_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ tos_fw_hash: tos_fw_hash {
+ oid = TRUSTED_OS_FW_HASH_OID;
+ };
+ tos_fw_extra1_hash: tos_fw_extra1_hash {
+ oid = TRUSTED_OS_FW_EXTRA1_HASH_OID;
+ };
+ tos_fw_extra2_hash: tos_fw_extra2_hash {
+ oid = TRUSTED_OS_FW_EXTRA2_HASH_OID;
+ };
+ tos_fw_config_hash: tos_fw_config_hash {
+ oid = TRUSTED_OS_FW_CONFIG_HASH_OID;
+ };
+ };
+
+ non_trusted_fw_key_cert: non_trusted_fw_key_cert {
+ image-id = <NON_TRUSTED_FW_KEY_CERT_ID>;
+ parent = <&trusted_key_cert>;
+ signing-key = <&non_trusted_world_pk>;
+ antirollback-counter = <&non_trusted_nv_counter>;
+
+ nt_fw_content_pk: nt_fw_content_pk {
+ oid = NON_TRUSTED_FW_CONTENT_CERT_PK_OID;
+ };
+ };
+
+ non_trusted_fw_content_cert: non_trusted_fw_content_cert {
+ image-id = <NON_TRUSTED_FW_CONTENT_CERT_ID>;
+ parent = <&non_trusted_fw_key_cert>;
+ signing-key = <&nt_fw_content_pk>;
+ antirollback-counter = <&non_trusted_nv_counter>;
+
+ nt_world_bl_hash: nt_world_bl_hash {
+ oid = NON_TRUSTED_WORLD_BOOTLOADER_HASH_OID;
+ };
+ nt_fw_config_hash: nt_fw_config_hash {
+ oid = NON_TRUSTED_FW_CONFIG_HASH_OID;
+ };
+ };
+
+#if defined(SPD_spmd)
+ sip_sp_content_cert: sip_sp_content_cert {
+ image-id = <SIP_SP_CONTENT_CERT_ID>;
+ parent = <&trusted_key_cert>;
+ signing-key = <&trusted_world_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ sp_pkg1_hash: sp_pkg1_hash {
+ oid = SP_PKG1_HASH_OID;
+ };
+ sp_pkg2_hash: sp_pkg2_hash {
+ oid = SP_PKG2_HASH_OID;
+ };
+ sp_pkg3_hash: sp_pkg3_hash {
+ oid = SP_PKG3_HASH_OID;
+ };
+ sp_pkg4_hash: sp_pkg4_hash {
+ oid = SP_PKG4_HASH_OID;
+ };
+ sp_pkg5_hash: sp_pkg5_hash {
+ oid = SP_PKG5_HASH_OID;
+ };
+ sp_pkg6_hash: sp_pkg6_hash {
+ oid = SP_PKG6_HASH_OID;
+ };
+ sp_pkg7_hash: sp_pkg7_hash {
+ oid = SP_PKG7_HASH_OID;
+ };
+ sp_pkg8_hash: sp_pkg8_hash {
+ oid = SP_PKG8_HASH_OID;
+ };
+ };
+#endif
+ };
+
+ images {
+ compatible = "arm, img-descs";
+
+ hw_config {
+ image-id = <HW_CONFIG_ID>;
+ parent = <&trusted_boot_fw_cert>;
+ hash = <&hw_config_hash>;
+ };
+
+ tb_fw_config {
+ image-id = <TB_FW_CONFIG_ID>;
+ parent = <&trusted_boot_fw_cert>;
+ hash = <&tb_fw_config_hash>;
+ };
+
+ scp_bl2_image {
+ image-id = <SCP_BL2_IMAGE_ID>;
+ parent = <&scp_fw_content_cert>;
+ hash = <&scp_fw_hash>;
+ };
+
+ bl31_image {
+ image-id = <BL31_IMAGE_ID>;
+ parent = <&soc_fw_content_cert>;
+ hash = <&soc_fw_hash>;
+ };
+
+ soc_fw_config {
+ image-id = <SOC_FW_CONFIG_ID>;
+ parent = <&soc_fw_content_cert>;
+ hash = <&soc_fw_config_hash>;
+ };
+
+ bl32_image {
+ image-id = <BL32_IMAGE_ID>;
+ parent = <&trusted_os_fw_content_cert>;
+ hash = <&tos_fw_hash>;
+ };
+
+ bl32_extra1_image {
+ image-id = <BL32_EXTRA1_IMAGE_ID>;
+ parent = <&trusted_os_fw_content_cert>;
+ hash = <&tos_fw_extra1_hash>;
+ };
+
+ bl32_extra2_image {
+ image-id = <BL32_EXTRA2_IMAGE_ID>;
+ parent = <&trusted_os_fw_content_cert>;
+ hash = <&tos_fw_extra2_hash>;
+ };
+
+ tos_fw_config {
+ image-id = <TOS_FW_CONFIG_ID>;
+ parent = <&trusted_os_fw_content_cert>;
+ hash = <&tos_fw_config_hash>;
+ };
+
+ bl33_image {
+ image-id = <BL33_IMAGE_ID>;
+ parent = <&non_trusted_fw_content_cert>;
+ hash = <&nt_world_bl_hash>;
+ };
+
+ nt_fw_config {
+ image-id = <NT_FW_CONFIG_ID>;
+ parent = <&non_trusted_fw_content_cert>;
+ hash = <&nt_fw_config_hash>;
+ };
+
+#if defined(SPD_spmd)
+ sp_pkg1 {
+ image-id = <SP_PKG1_ID>;
+ parent = <&sip_sp_content_cert>;
+ hash = <&sp_pkg1_hash>;
+ };
+
+ sp_pkg2 {
+ image-id = <SP_PKG2_ID>;
+ parent = <&sip_sp_content_cert>;
+ hash = <&sp_pkg2_hash>;
+ };
+
+ sp_pkg3 {
+ image-id = <SP_PKG3_ID>;
+ parent = <&sip_sp_content_cert>;
+ hash = <&sp_pkg3_hash>;
+ };
+
+ sp_pkg4 {
+ image-id = <SP_PKG4_ID>;
+ parent = <&sip_sp_content_cert>;
+ hash = <&sp_pkg4_hash>;
+ };
+
+ sp_pkg5 {
+ image-id = <SP_PKG5_ID>;
+ parent = <&sip_sp_content_cert>;
+ hash = <&sp_pkg5_hash>;
+ };
+
+ sp_pkg6 {
+ image-id = <SP_PKG6_ID>;
+ parent = <&sip_sp_content_cert>;
+ hash = <&sp_pkg6_hash>;
+ };
+
+ sp_pkg7 {
+ image-id = <SP_PKG7_ID>;
+ parent = <&sip_sp_content_cert>;
+ hash = <&sp_pkg7_hash>;
+ };
+
+ sp_pkg8 {
+ image-id = <SP_PKG8_ID>;
+ parent = <&sip_sp_content_cert>;
+ hash = <&sp_pkg8_hash>;
+ };
+#endif
+ };
+};
+
+non_volatile_counters: non_volatile_counters {
+ compatible = "arm, non-volatile-counter";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ trusted_nv_counter: trusted_nv_counter {
+ id = <TRUSTED_NV_CTR_ID>;
+ oid = TRUSTED_FW_NVCOUNTER_OID;
+ };
+
+ non_trusted_nv_counter: non_trusted_nv_counter {
+ id = <NON_TRUSTED_NV_CTR_ID>;
+ oid = NON_TRUSTED_FW_NVCOUNTER_OID;
+ };
+};
diff --git a/fdts/fvp-base-gicv2-psci.dts b/fdts/fvp-base-gicv2-psci.dts
new file mode 100644
index 0000000..0361bdc
--- /dev/null
+++ b/fdts/fvp-base-gicv2-psci.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* Configuration: max 4 clusters with up to 4 CPUs */
+
+#define AFF
+
+#include "fvp-defs.dtsi"
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "fvp-base-gicv2.dtsi"
+#include "fvp-base-psci-common.dtsi"
diff --git a/fdts/fvp-base-gicv2.dtsi b/fdts/fvp-base-gicv2.dtsi
new file mode 100644
index 0000000..8d84208
--- /dev/null
+++ b/fdts/fvp-base-gicv2.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* GICv2 configuration, without V2M */
+
+/ {
+ gic: interrupt-controller@2f000000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x0 0x2f000000 0 0x10000>,
+ <0x0 0x2c000000 0 0x2000>,
+ <0x0 0x2c010000 0 0x2000>,
+ <0x0 0x2c02F000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+};
diff --git a/fdts/fvp-base-gicv3-psci-1t.dts b/fdts/fvp-base-gicv3-psci-1t.dts
new file mode 100644
index 0000000..829555b
--- /dev/null
+++ b/fdts/fvp-base-gicv3-psci-1t.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* Configuration: max 4 clusters with up to 4 CPUs with 1 thread per each */
+
+#define AFF 00
+
+#include "fvp-defs.dtsi"
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "fvp-base-gicv3.dtsi"
+#include "fvp-base-psci-common.dtsi"
diff --git a/fdts/fvp-base-gicv3-psci-dynamiq-2t.dts b/fdts/fvp-base-gicv3-psci-dynamiq-2t.dts
new file mode 100644
index 0000000..9d5b979
--- /dev/null
+++ b/fdts/fvp-base-gicv3-psci-dynamiq-2t.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2019-2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* DynamIQ configuration: 1 cluster with up to 8 CPUs with 2 threads per each */
+
+/* Set default value if not passed from platform's makefile */
+#ifdef FVP_MAX_PE_PER_CPU
+#define PE_PER_CPU FVP_MAX_PE_PER_CPU
+#else
+#define PE_PER_CPU 2
+#endif
+
+#include "fvp-defs-dynamiq.dtsi"
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "fvp-base-gicv3.dtsi"
+#include "fvp-base-psci-common.dtsi"
diff --git a/fdts/fvp-base-gicv3-psci-dynamiq-common.dtsi b/fdts/fvp-base-gicv3-psci-dynamiq-common.dtsi
new file mode 100644
index 0000000..42a439f
--- /dev/null
+++ b/fdts/fvp-base-gicv3-psci-dynamiq-common.dtsi
@@ -0,0 +1,10 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+#include "fvp-defs-dynamiq.dtsi"
+#include "fvp-base-gicv3-psci-common.dtsi"
diff --git a/fdts/fvp-base-gicv3-psci-dynamiq.dts b/fdts/fvp-base-gicv3-psci-dynamiq.dts
new file mode 100644
index 0000000..1bf803e
--- /dev/null
+++ b/fdts/fvp-base-gicv3-psci-dynamiq.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* DynamIQ configuration: 1 cluster with up to 8 CPUs */
+
+/* Set default value if not passed from platform's makefile */
+#ifdef FVP_MAX_PE_PER_CPU
+#define PE_PER_CPU FVP_MAX_PE_PER_CPU
+#else
+#define PE_PER_CPU 1
+#endif
+
+#include "fvp-defs-dynamiq.dtsi"
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "fvp-base-gicv3.dtsi"
+#include "fvp-base-psci-common.dtsi"
diff --git a/fdts/fvp-base-gicv3-psci.dts b/fdts/fvp-base-gicv3-psci.dts
new file mode 100644
index 0000000..69db267
--- /dev/null
+++ b/fdts/fvp-base-gicv3-psci.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* Configuration: max 4 clusters with up to 4 CPUs */
+
+#define AFF
+
+#include "fvp-defs.dtsi"
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "fvp-base-gicv3.dtsi"
+#include "fvp-base-psci-common.dtsi"
diff --git a/fdts/fvp-base-gicv3.dtsi b/fdts/fvp-base-gicv3.dtsi
new file mode 100644
index 0000000..fdcfa92
--- /dev/null
+++ b/fdts/fvp-base-gicv3.dtsi
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* GICv3 with ITS configuration */
+
+/ {
+ gic: interrupt-controller@2f000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x2f000000 0x100000>;
+ interrupt-controller;
+ reg = <0x0 0x2f000000 0 0x10000>, // GICD
+ <0x0 0x2f100000 0 0x200000>, // GICR
+ <0x0 0x2c000000 0 0x2000>, // GICC
+ <0x0 0x2c010000 0 0x2000>, // GICH
+ <0x0 0x2c02f000 0 0x2000>; // GICV
+ interrupts = <1 9 4>;
+
+ its: msi-controller@2f020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x20000 0x20000>; // GITS
+ };
+ };
+};
diff --git a/fdts/fvp-base-psci-common.dtsi b/fdts/fvp-base-psci-common.dtsi
new file mode 100644
index 0000000..6018f0c
--- /dev/null
+++ b/fdts/fvp-base-psci-common.dtsi
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ *
+ * Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <services/sdei_flags.h>
+
+#define LEVEL 0
+#define EDGE 2
+#define SDEI_NORMAL 0x70
+#define HIGHEST_SEC 0
+
+#include "rtsm_ve-motherboard.dtsi"
+
+/ {
+ model = "FVP Base";
+ compatible = "arm,fvp-base", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+#if (ENABLE_RME == 1)
+ chosen { bootargs = "mem=1G console=ttyAMA0 earlycon=pl011,0x1c090000 root=/dev/vda ip=on";};
+#else
+ chosen {};
+#endif
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ max-pwr-lvl = <2>;
+ };
+
+#if SDEI_IN_FCONF || SEC_INT_DESC_IN_FCONF
+ firmware {
+#if SDEI_IN_FCONF
+ sdei {
+ compatible = "arm,sdei-1.0";
+ method = "smc";
+ private_event_count = <3>;
+ shared_event_count = <3>;
+ /*
+ * Each event descriptor has typically 3 fields:
+ * 1. Event number
+ * 2. Interrupt number the event is bound to or
+ * if event is dynamic, specified as SDEI_DYN_IRQ
+ * 3. Bit map of event flags
+ */
+ private_events = <1000 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>,
+ <1001 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>,
+ <1002 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>;
+ shared_events = <2000 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>,
+ <2001 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>,
+ <2002 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>;
+ };
+#endif /* SDEI_IN_FCONF */
+
+#if SEC_INT_DESC_IN_FCONF
+ sec_interrupts {
+ compatible = "arm,secure_interrupt_desc";
+ /* Number of G0 and G1 secure interrupts defined by the platform */
+ g0_intr_cnt = <2>;
+ g1s_intr_cnt = <9>;
+ /*
+ * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. Each interrupt property descriptor has 3 fields:
+ * 1. Interrupt number
+ * 2. Interrupt priority
+ * 3. Type of interrupt (Edge or Level configured)
+ */
+ g0_intr_desc = < 8 SDEI_NORMAL EDGE>,
+ <14 HIGHEST_SEC EDGE>;
+
+ g1s_intr_desc = < 9 HIGHEST_SEC EDGE>,
+ <10 HIGHEST_SEC EDGE>,
+ <11 HIGHEST_SEC EDGE>,
+ <12 HIGHEST_SEC EDGE>,
+ <13 HIGHEST_SEC EDGE>,
+ <15 HIGHEST_SEC EDGE>,
+ <29 HIGHEST_SEC LEVEL>,
+ <56 HIGHEST_SEC LEVEL>,
+ <57 HIGHEST_SEC LEVEL>;
+ };
+#endif /* SEC_INT_DESC_IN_FCONF */
+ };
+#endif /* SDEI_IN_FCONF || SEC_INT_DESC_IN_FCONF */
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU_MAP
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <40>;
+ exit-latency-us = <100>;
+ min-residency-us = <150>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1000>;
+ min-residency-us = <2500>;
+ };
+ };
+
+ CPUS
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+#if (ENABLE_RME == 1)
+ reg = <0x00000000 0x80000000 0 0x7C000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+#else
+ reg = <0x00000000 0x80000000 0 0x7F000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+#endif
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2,00000000 is physically at 0x18000000 */
+ vram: vram@18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0x00000000 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <100000000>;
+ };
+
+ timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <100000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x2a810000 0x100000>;
+
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x20000 0x10000>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ panel {
+ compatible = "arm,rtsm-display";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
+
+ bus@8000000 {
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 13 &gic 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 14 &gic 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 15 &gic 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 16 &gic 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 17 &gic 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 18 &gic 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 19 &gic 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 20 &gic 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 21 &gic 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 22 &gic 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 23 &gic 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 24 &gic 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 25 &gic 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 26 &gic 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 27 &gic 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 28 &gic 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 29 &gic 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 30 &gic 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 31 &gic 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 32 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 33 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 34 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 35 &gic 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 36 &gic 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 37 &gic 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 38 &gic 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 39 &gic 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 40 &gic 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/fdts/fvp-defs-dynamiq.dtsi b/fdts/fvp-defs-dynamiq.dtsi
new file mode 100644
index 0000000..3659cd3
--- /dev/null
+++ b/fdts/fvp-defs-dynamiq.dtsi
@@ -0,0 +1,289 @@
+/*
+ * Copyright (c) 2020, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_DEFS_DYNAMIQ_DTSI
+#define FVP_DEFS_DYNAMIQ_DTSI
+
+/* Set default topology values if not passed from platform's makefile */
+#ifdef FVP_CLUSTER_COUNT
+#define CLUSTER_COUNT FVP_CLUSTER_COUNT
+#else
+#define CLUSTER_COUNT 1
+#endif
+
+#ifdef FVP_MAX_CPUS_PER_CLUSTER
+#define CPUS_PER_CLUSTER FVP_MAX_CPUS_PER_CLUSTER
+#else
+#define CPUS_PER_CLUSTER 8
+#endif
+
+#define CONCAT(x, y) x##y
+#define CONC(x, y) CONCAT(x, y)
+
+/*
+ * n - CPU number
+ * r - MPID
+ */
+#define CPU(n, r) \
+ CPU##n:cpu@r## { \
+ device_type = "cpu"; \
+ compatible = "arm,armv8"; \
+ reg = <0x0 0x##r>; \
+ enable-method = "psci"; \
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; \
+ next-level-cache = <&L2_0>; \
+ };
+
+#if (PE_PER_CPU == 2)
+#define THREAD(n) \
+ thread##n { \
+ cpu = <&CONC(CPU, __COUNTER__)>; \
+ };
+
+#define CORE(n) \
+ core##n { \
+ THREAD(0) \
+ THREAD(1) \
+ };
+
+#else /* PE_PER_CPU == 1 */
+#define CORE(n) \
+ core##n { \
+ cpu = <&CPU##n>;\
+ };
+#endif /* PE_PER_CORE */
+
+#if (CPUS_PER_CLUSTER == 1)
+#if (PE_PER_CPU == 1)
+#define CPUS \
+ CPU(0, 0)
+#else
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 1)
+#endif
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ };
+
+#elif (CPUS_PER_CLUSTER == 2)
+#if (PE_PER_CPU == 1)
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 100)
+#else
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 1) \
+ CPU(2, 100) \
+ CPU(3, 101)
+#endif
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ };
+
+#elif (CPUS_PER_CLUSTER == 3)
+#if (PE_PER_CPU == 1)
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 100) \
+ CPU(2, 200)
+#else
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 1) \
+ CPU(2, 100) \
+ CPU(3, 101) \
+ CPU(4, 200) \
+ CPU(5, 201)
+#endif
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ CORE(2) \
+ };
+
+#elif (CPUS_PER_CLUSTER == 4)
+#if (PE_PER_CPU == 1)
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 100) \
+ CPU(2, 200) \
+ CPU(3, 300)
+#else
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 1) \
+ CPU(2, 100) \
+ CPU(3, 101) \
+ CPU(4, 200) \
+ CPU(5, 201) \
+ CPU(6, 300) \
+ CPU(7, 301)
+#endif
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ CORE(2) \
+ CORE(3) \
+ };
+
+#elif (CPUS_PER_CLUSTER == 5)
+#if (PE_PER_CPU == 1)
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 100) \
+ CPU(2, 200) \
+ CPU(3, 300) \
+ CPU(4, 400)
+#else
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 1) \
+ CPU(2, 100) \
+ CPU(3, 101) \
+ CPU(4, 200) \
+ CPU(5, 201) \
+ CPU(6, 300) \
+ CPU(7, 301) \
+ CPU(8, 400) \
+ CPU(9, 401)
+#endif
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ CORE(2) \
+ CORE(3) \
+ CORE(4) \
+ };
+
+#elif (CPUS_PER_CLUSTER == 6)
+#if (PE_PER_CPU == 1)
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 100) \
+ CPU(2, 200) \
+ CPU(3, 300) \
+ CPU(4, 400) \
+ CPU(5, 500)
+#else
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 1) \
+ CPU(2, 100) \
+ CPU(3, 101) \
+ CPU(4, 200) \
+ CPU(5, 201) \
+ CPU(6, 300) \
+ CPU(7, 301) \
+ CPU(8, 400) \
+ CPU(9, 401) \
+ CPU(10, 500) \
+ CPU(11, 501)
+#endif
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ CORE(2) \
+ CORE(3) \
+ CORE(4) \
+ CORE(5) \
+ };
+
+#elif (CPUS_PER_CLUSTER == 7)
+#if (PE_PER_CPU == 1)
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 100) \
+ CPU(2, 200) \
+ CPU(3, 300) \
+ CPU(4, 400) \
+ CPU(5, 500) \
+ CPU(6, 600)
+#else
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 1) \
+ CPU(2, 100) \
+ CPU(3, 101) \
+ CPU(4, 200) \
+ CPU(5, 201) \
+ CPU(6, 300) \
+ CPU(7, 301) \
+ CPU(8, 400) \
+ CPU(9, 401) \
+ CPU(10, 500) \
+ CPU(11, 501) \
+ CPU(12, 600) \
+ CPU(13, 601)
+#endif
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ CORE(2) \
+ CORE(3) \
+ CORE(4) \
+ CORE(5) \
+ CORE(6) \
+ };
+
+#else
+#if (PE_PER_CPU == 1)
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 100) \
+ CPU(2, 200) \
+ CPU(3, 300) \
+ CPU(4, 400) \
+ CPU(5, 500) \
+ CPU(6, 600) \
+ CPU(7, 700)
+#else
+#define CPUS \
+ CPU(0, 0) \
+ CPU(1, 1) \
+ CPU(2, 100) \
+ CPU(3, 101) \
+ CPU(4, 200) \
+ CPU(5, 201) \
+ CPU(6, 300) \
+ CPU(7, 301) \
+ CPU(8, 400) \
+ CPU(9, 401) \
+ CPU(10, 500) \
+ CPU(11, 501) \
+ CPU(12, 600) \
+ CPU(13, 601) \
+ CPU(14, 700) \
+ CPU(15, 701)
+#endif
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ CORE(2) \
+ CORE(3) \
+ CORE(4) \
+ CORE(5) \
+ CORE(6) \
+ CORE(7) \
+ };
+#endif /* CPUS_PER_CLUSTER */
+
+#define CPU_MAP \
+ cpu-map { \
+ CLUSTER(0) \
+ };
+
+#endif /* FVP_DEFS_DYNAMIQ_DTSI */
diff --git a/fdts/fvp-defs.dtsi b/fdts/fvp-defs.dtsi
new file mode 100644
index 0000000..9fd33ca
--- /dev/null
+++ b/fdts/fvp-defs.dtsi
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2020, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_DEFS_DTSI
+#define FVP_DEFS_DTSI
+
+/* Set default topology values if not passed from platform's makefile */
+#ifndef CLUSTER_COUNT
+#ifdef FVP_CLUSTER_COUNT
+#define CLUSTER_COUNT FVP_CLUSTER_COUNT
+#else
+#define CLUSTER_COUNT 2
+#endif
+#endif /* CLUSTER_COUNT */
+
+#ifndef CPUS_PER_CLUSTER
+#ifdef FVP_MAX_CPUS_PER_CLUSTER
+#define CPUS_PER_CLUSTER FVP_MAX_CPUS_PER_CLUSTER
+#else
+#define CPUS_PER_CLUSTER 4
+#endif
+#endif /* CPUS_PER_CLUSTER */
+
+/* Get platform's topology */
+#define CPUS_COUNT (CLUSTER_COUNT * CPUS_PER_CLUSTER)
+
+#define CONCAT(x, y) x##y
+#define CONC(x, y) CONCAT(x, y)
+
+/* CPU's cluster */
+#define CLS(n) (n / CPUS_PER_CLUSTER)
+
+/* CPU's position in cluster */
+#define POS(n) (n % CPUS_PER_CLUSTER)
+
+#define ADR(n, c, p) \
+ CPU##n:cpu@CONC(c, CONC(p, AFF)) {
+
+#define PRE \
+ device_type = "cpu"; \
+ compatible = "arm,armv8";
+
+#define POST \
+ enable-method = "psci"; \
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; \
+ next-level-cache = <&L2_0>; \
+ };
+
+#define CPU_0 \
+ CPU0:cpu@0 { \
+ PRE \
+ reg = <0x0 0x0>;\
+ POST
+
+/*
+ * n - CPU number
+ */
+#define CPU(n, c, p) \
+ ADR(n, c, p) \
+ PRE \
+ reg = <0x0 CONC(0x, CONC(c, CONC(p, AFF)))>; \
+ POST
+
+/* 2 CPUs */
+#if (CPUS_COUNT > 1)
+#if (CLS(1) == 0)
+#define c1
+#define p1 1
+#else
+#define c1 10
+#define p1 0
+#endif
+
+#define CPU_1 CPU(1, c1, p1) /* CPU1: 0.1; 1.0 */
+
+/* 3 CPUs */
+#if (CPUS_COUNT > 2)
+#if (CLS(2) == 0)
+#define c2
+#define p2 2
+#elif (CLS(2) == 1)
+#define c2 10
+#define p2 0
+#else
+#define c2 20
+#define p2 0
+#endif
+
+#define CPU_2 CPU(2, c2, p2) /* CPU2: 0.2; 1.0; 2.0 */
+
+/* 4 CPUs */
+#if (CPUS_COUNT > 3)
+#if (CLS(3) == 0)
+#define c3
+#elif (CLS(3) == 1)
+#define c3 10
+#else
+#define c3 30
+#endif
+
+#if (POS(3) == 0)
+#define p3 0
+#elif (POS(3) == 1)
+#define p3 1
+#else
+#define p3 3
+#endif
+
+#define CPU_3 CPU(3, c3, p3) /* CPU3: 0.3; 1.0; 1.1; 3.0 */
+
+/* 6 CPUs */
+#if (CPUS_COUNT > 4)
+#if (CLS(4) == 1)
+#define c4 10
+#else
+#define c4 20
+#endif
+
+#if (POS(4) == 0)
+#define p4 0
+#else
+#define p4 1
+#endif
+
+#if (CLS(5) == 1)
+#define c5 10
+#else
+#define c5 20
+#endif
+
+#if (POS(5) == 1)
+#define p5 1
+#else
+#define p5 2
+#endif
+
+#define CPU_4 CPU(4, c4, p4) /* CPU4: 1.0; 1.1; 2.0 */
+#define CPU_5 CPU(5, c5, p5) /* CPU5: 1.1; 1.2; 2.1 */
+
+/* 8 CPUs */
+#if (CPUS_COUNT > 6)
+#if (CLS(6) == 1)
+#define c6 10
+#define p6 2
+#elif (CLS(6) == 2)
+#define c6 20
+#define p6 0
+#else
+#define c6 30
+#define p6 0
+#endif
+
+#if (CLS(7) == 1)
+#define c7 10
+#define p7 3
+#elif (CLS(7) == 2)
+#define c7 20
+#define p7 1
+#else
+#define c7 30
+#define p7 1
+#endif
+
+#define CPU_6 CPU(6, c6, p6) /* CPU6: 1.2; 2.0; 3.0 */
+#define CPU_7 CPU(7, c7, p7) /* CPU7: 1.3; 2.1; 3.1 */
+
+/* 9 CPUs */
+#if (CPUS_COUNT > 8)
+#if (POS(8) == 0)
+#define p8 0
+#else
+#define p8 2
+#endif
+
+#define CPU_8 CPU(8, 20, p8) /* CPU8: 2.0; 2.2 */
+
+/* 12 CPUs */
+#if (CPUS_COUNT > 9)
+#if (CLS(9) == 2)
+#define c9 20
+#define p9 1
+#else
+#define c9 30
+#define p9 0
+#endif
+
+#if (CLS(10) == 2)
+#define c10 20
+#define p10 2
+#else
+#define c10 30
+#define p10 1
+#endif
+
+#if (CLS(11) == 2)
+#define c11 20
+#define p11 3
+#else
+#define c11 30
+#define p11 2
+#endif
+
+#define CPU_9 CPU(9, c9, p9) /* CPU9: 2.1; 3.0 */
+#define CPU_10 CPU(10, c10, p10) /* CPU10: 2.2; 3.1 */
+#define CPU_11 CPU(11, c11, p11) /* CPU11: 2.3; 3.2 */
+
+/* 16 CPUs */
+#if (CPUS_COUNT > 12)
+#define CPU_12 CPU(12, 30, 0) /* CPU12: 3.0 */
+#define CPU_13 CPU(13, 30, 1) /* CPU13: 3.1 */
+#define CPU_14 CPU(14, 30, 2) /* CPU14: 3.2 */
+#define CPU_15 CPU(15, 30, 3) /* CPU15: 3.3 */
+#endif /* > 12 */
+#endif /* > 9 */
+#endif /* > 8 */
+#endif /* > 6 */
+#endif /* > 4 */
+#endif /* > 3 */
+#endif /* > 2 */
+#endif /* > 1 */
+
+#if (CPUS_COUNT == 1)
+#define CPUS \
+ CPU_0
+
+#elif (CPUS_COUNT == 2)
+#define CPUS \
+ CPU_0 \
+ CPU_1
+
+#elif (CPUS_COUNT == 3)
+#define CPUS \
+ CPU_0 \
+ CPU_1 \
+ CPU_2
+
+#elif (CPUS_COUNT == 4)
+#define CPUS \
+ CPU_0 \
+ CPU_1 \
+ CPU_2 \
+ CPU_3
+
+#elif (CPUS_COUNT == 6)
+#define CPUS \
+ CPU_0 \
+ CPU_1 \
+ CPU_2 \
+ CPU_3 \
+ CPU_4 \
+ CPU_5
+
+#elif (CPUS_COUNT == 8)
+#define CPUS \
+ CPU_0 \
+ CPU_1 \
+ CPU_2 \
+ CPU_3 \
+ CPU_4 \
+ CPU_5 \
+ CPU_6 \
+ CPU_7
+
+#elif (CPUS_COUNT == 9)
+#define CPUS \
+ CPU_0 \
+ CPU_1 \
+ CPU_2 \
+ CPU_3 \
+ CPU_4 \
+ CPU_5 \
+ CPU_6 \
+ CPU_7 \
+ CPU_8
+
+#elif (CPUS_COUNT == 12)
+#define CPUS \
+ CPU_0 \
+ CPU_1 \
+ CPU_2 \
+ CPU_3 \
+ CPU_4 \
+ CPU_5 \
+ CPU_6 \
+ CPU_7 \
+ CPU_8 \
+ CPU_9 \
+ CPU_10 \
+ CPU_11
+
+#else
+#define CPUS \
+ CPU_0 \
+ CPU_1 \
+ CPU_2 \
+ CPU_3 \
+ CPU_4 \
+ CPU_5 \
+ CPU_6 \
+ CPU_7 \
+ CPU_8 \
+ CPU_9 \
+ CPU_10 \
+ CPU_11 \
+ CPU_12 \
+ CPU_13 \
+ CPU_14 \
+ CPU_15
+#endif /* CPUS_COUNT */
+
+#define CORE(n) \
+ core##n { \
+ cpu = <&CONC(CPU, __COUNTER__)>; \
+ };
+
+/* Max 4 CPUs per cluster */
+#if (CPUS_PER_CLUSTER == 1)
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ };
+#elif (CPUS_PER_CLUSTER == 2)
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ };
+
+#elif (CPUS_PER_CLUSTER == 3)
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ CORE(2) \
+ };
+
+#else
+#define CLUSTER(n) \
+ cluster##n { \
+ CORE(0) \
+ CORE(1) \
+ CORE(2) \
+ CORE(3) \
+ };
+#endif /* CPUS_PER_CLUSTER */
+
+/* Max 4 clusters */
+#if (CLUSTER_COUNT == 1)
+#define CPU_MAP \
+ cpu-map { \
+ CLUSTER(0) \
+ };
+
+#elif (CLUSTER_COUNT == 2)
+#define CPU_MAP \
+ cpu-map { \
+ CLUSTER(0) \
+ CLUSTER(1) \
+ };
+
+#elif (CLUSTER_COUNT == 3)
+#define CPU_MAP \
+ cpu-map { \
+ CLUSTER(0) \
+ CLUSTER(1) \
+ CLUSTER(2) \
+ };
+
+#else
+#define CPU_MAP \
+ cpu-map { \
+ CLUSTER(0) \
+ CLUSTER(1) \
+ CLUSTER(2) \
+ CLUSTER(3) \
+ };
+#endif /* CLUSTER_COUNT */
+
+#endif /* FVP_DEFS_DTSI */
diff --git a/fdts/fvp-foundation-gicv2-psci.dts b/fdts/fvp-foundation-gicv2-psci.dts
new file mode 100644
index 0000000..5a82c46
--- /dev/null
+++ b/fdts/fvp-foundation-gicv2-psci.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* Configuration: 1 cluster with up to 4 CPUs */
+
+/dts-v1/;
+
+#define AFF
+#define CLUSTER_COUNT 1
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "fvp-defs.dtsi"
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+};
+
+/ {
+ model = "FVP Foundation";
+ compatible = "arm,fvp-base", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
+ method = "smc";
+ cpu_suspend = <0xc4000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0xc4000003>;
+ sys_poweroff = <0x84000008>;
+ sys_reset = <0x84000009>;
+ max-pwr-lvl = <2>;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU_MAP
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <40>;
+ exit-latency-us = <100>;
+ min-residency-us = <150>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1000>;
+ min-residency-us = <2500>;
+ };
+ };
+
+ CPUS
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x7F000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller@2f000000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x2f000000 0 0x10000>,
+ <0x0 0x2c000000 0 0x2000>,
+ <0x0 0x2c010000 0 0x2000>,
+ <0x0 0x2c02F000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <100000000>;
+ };
+
+ timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <100000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <0 26 4>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #include "fvp-foundation-motherboard.dtsi"
+ };
+};
diff --git a/fdts/fvp-foundation-gicv3-psci.dts b/fdts/fvp-foundation-gicv3-psci.dts
new file mode 100644
index 0000000..e1249d4
--- /dev/null
+++ b/fdts/fvp-foundation-gicv3-psci.dts
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* Configuration: 1 cluster with up to 4 CPUs */
+
+/dts-v1/;
+
+#define AFF
+#define CLUSTER_COUNT 1
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "fvp-defs.dtsi"
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+};
+
+/ {
+ model = "FVP Foundation";
+ compatible = "arm,fvp-base", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
+ method = "smc";
+ cpu_suspend = <0xc4000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0xc4000003>;
+ sys_poweroff = <0x84000008>;
+ sys_reset = <0x84000009>;
+ max-pwr-lvl = <2>;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU_MAP
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <40>;
+ exit-latency-us = <100>;
+ min-residency-us = <150>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1000>;
+ min-residency-us = <2500>;
+ };
+ };
+
+ CPUS
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x7F000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller@2f000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ reg = <0x0 0x2f000000 0 0x10000>, // GICD
+ <0x0 0x2f100000 0 0x200000>, // GICR
+ <0x0 0x2c000000 0 0x2000>, // GICC
+ <0x0 0x2c010000 0 0x2000>, // GICH
+ <0x0 0x2c02f000 0 0x2000>; // GICV
+ interrupts = <1 9 4>;
+
+ its: its@2f020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x2f020000 0x0 0x20000>; // GITS
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <100000000>;
+ };
+
+ timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <100000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <0 26 4>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #include "fvp-foundation-motherboard.dtsi"
+ };
+};
diff --git a/fdts/fvp-foundation-motherboard.dtsi b/fdts/fvp-foundation-motherboard.dtsi
new file mode 100644
index 0000000..9ee5b64
--- /dev/null
+++ b/fdts/fvp-foundation-motherboard.dtsi
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+ motherboard {
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ ranges;
+
+ ethernet@2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <0 15 4>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga@3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg@10000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_sysctl: sysctl@20000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
+ v2m_serial0: uart@90000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <0 5 4>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart@a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <0 6 4>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart@b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <0 7 4>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart@c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <0 8 4>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt@f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0 0 4>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <0 2 4>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <0 3 4>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <0 4 4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ virtio_block@130000 {
+ compatible = "virtio,mmio";
+ reg = <0x130000 0x1000>;
+ interrupts = <0 0x2a 4>;
+ };
+ };
+
+ v2m_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+
+ mcc {
+ compatible = "arm,vexpress,config-bus", "simple-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ /*
+ * Not supported in FVP models
+ *
+ * reset@0 {
+ * compatible = "arm,vexpress-reset";
+ * arm,vexpress-sysreg,func = <5 0>;
+ * };
+ */
+
+ muxfpga@0 {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ /*
+ * Not used - Superseded by PSCI sys_poweroff
+ *
+ * shutdown@0 {
+ * compatible = "arm,vexpress-shutdown";
+ * arm,vexpress-sysreg,func = <8 0>;
+ * };
+ */
+
+ /*
+ * Not used - Superseded by PSCI sys_reset
+ *
+ * reboot@0 {
+ * compatible = "arm,vexpress-reboot";
+ * arm,vexpress-sysreg,func = <9 0>;
+ * };
+ */
+
+ dvimode@0 {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+ };
diff --git a/fdts/fvp-ve-Cortex-A5x1.dts b/fdts/fvp-ve-Cortex-A5x1.dts
new file mode 100644
index 0000000..612b3b2
--- /dev/null
+++ b/fdts/fvp-ve-Cortex-A5x1.dts
@@ -0,0 +1,167 @@
+/*
+ * Copyright (c) 2019-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+#include "rtsm_ve-motherboard.dtsi"
+
+/ {
+ model = "V2P-CA5s";
+ compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ };
+
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0x1000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Chipselect 2,00000000 is physically at 0x18000000 */
+ vram: vram@18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0 0x18000000 0x00800000>;
+ no-map;
+ };
+ };
+
+ hdlcd@2a110000 {
+ compatible = "arm,hdlcd";
+ reg = <0 0x2a110000 0x1000>;
+ interrupts = <0 85 4>;
+ clocks = <&oscclk3>;
+ clock-names = "pxlclk";
+ };
+
+ scu@2c000000 {
+ compatible = "arm,cortex-a5-scu";
+ reg = <0 0x2c000000 0x58>;
+ };
+
+ watchdog@2c000620 {
+ compatible = "arm,cortex-a5-twd-wdt";
+ reg = <0 0x2c000620 0x20>;
+ interrupts = <1 14 0x304>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x2c001000 0x1000>,
+ <0 0x2c000100 0x100>;
+ };
+
+ mcc {
+ oscclk0: oscclk0 {
+ /* CPU and internal AXI reference clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <50000000 100000000>;
+ #clock-cells = <0>;
+ clock-output-names = "oscclk0";
+ };
+
+ oscclk1: oscclk1 {
+ /* Multiplexed AXI master clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <5000000 50000000>;
+ #clock-cells = <0>;
+ clock-output-names = "oscclk1";
+ };
+
+ oscclk2 {
+ /* DDR2 */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <80000000 120000000>;
+ #clock-cells = <0>;
+ clock-output-names = "oscclk2";
+ };
+
+ oscclk3: oscclk3 {
+ /* HDLCD */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 3>;
+ freq-range = <23750000 165000000>;
+ #clock-cells = <0>;
+ clock-output-names = "oscclk3";
+ };
+
+ oscclk4 {
+ /* Test chip gate configuration */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 4>;
+ freq-range = <80000000 80000000>;
+ #clock-cells = <0>;
+ clock-output-names = "oscclk4";
+ };
+
+ smbclk: oscclk5 {
+ /* SMB clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 5>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "oscclk5";
+ };
+ };
+
+ panel {
+ compatible = "arm,rtsm-display";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
+
+ bus@8000000 {
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 43 &gic GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 44 &gic GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 46 &gic GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/fdts/fvp-ve-Cortex-A7x1.dts b/fdts/fvp-ve-Cortex-A7x1.dts
new file mode 100644
index 0000000..6ec6adb
--- /dev/null
+++ b/fdts/fvp-ve-Cortex-A7x1.dts
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2019-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+#include "rtsm_ve-motherboard.dtsi"
+
+/ {
+ model = "V2F-1XV7 Cortex-A7x1 SMM";
+ compatible = "arm,vexpress,v2f-1xv7", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ };
+ };
+
+ memory@0,80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0x80000000>; /* 2GB @ 2GB */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Chipselect 2,00000000 is physically at 0x18000000 */
+ vram: vram@18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0 0x18000000 0x00800000>;
+ no-map;
+ };
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x2c001000 0x1000>,
+ <0 0x2c002000 0x1000>,
+ <0 0x2c004000 0x2000>,
+ <0 0x2c006000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ smbclk: refclk24mhzx2 {
+ /* Reference 24MHz clock x 2 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "smclk";
+ };
+
+ panel {
+ compatible = "arm,rtsm-display";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
+
+ bus@8000000 {
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 43 &gic GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 44 &gic GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 46 &gic GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/fdts/juno-ethosn.dtsi b/fdts/juno-ethosn.dtsi
new file mode 100644
index 0000000..4609524
--- /dev/null
+++ b/fdts/juno-ethosn.dtsi
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2021-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * This device tree is only an example and some properties have been omitted.
+ *
+ * Refer to the Arm(R) Ethos(TM)-N driver stack for complete device tree examples.
+ * https://github.com/ARM-software/ethos-n-driver-stack
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ smmu_ethosn0: iommu@6f400000 {
+ compatible = "arm,smmu-v3";
+ reg = <0 0x6f400000 0 0x80000>;
+ status = "okay";
+ /* msi-parent omitted */
+ #iommu-cells = <0x1>;
+ };
+
+ ethosn0: ethosn@6f300000 {
+ compatible = "ethosn";
+ reg = <0 0x6f300000 0 0x00100000>;
+ status = "okay";
+
+ core0 {
+ compatible = "ethosn-core";
+ status = "okay";
+
+ main_allocator {
+ compatible = "ethosn-main_allocator";
+ status = "okay";
+
+ firmware {
+ compatible = "ethosn-memory";
+ iommus = <&smmu_ethosn0 0>;
+ };
+
+ working_data {
+ compatible = "ethosn-memory";
+ iommus = <&smmu_ethosn0 1>;
+ };
+ };
+ };
+
+ asset_allocator {
+ compatible = "ethosn-asset_allocator";
+ status = "okay";
+
+ command_stream {
+ compatible = "ethosn-memory";
+ iommus = <&smmu_ethosn0 2>;
+ };
+
+ weight_data {
+ compatible = "ethosn-memory";
+ iommus = <&smmu_ethosn0 3>;
+ };
+
+ buffer_data {
+ compatible = "ethosn-memory";
+ iommus = <&smmu_ethosn0 4>;
+ };
+
+ intermediate_data {
+ compatible = "ethosn-memory";
+ iommus = <&smmu_ethosn0 5>;
+ };
+ };
+ };
+};
diff --git a/fdts/juno.dts b/fdts/juno.dts
new file mode 100644
index 0000000..56fe167
--- /dev/null
+++ b/fdts/juno.dts
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+
+};
+
+#if ARM_ETHOSN_NPU_DRIVER
+ #include "juno-ethosn.dtsi"
+#endif
diff --git a/fdts/morello-fvp.dts b/fdts/morello-fvp.dts
new file mode 100644
index 0000000..dc3df41
--- /dev/null
+++ b/fdts/morello-fvp.dts
@@ -0,0 +1,167 @@
+/*
+ * Copyright (c) 2020-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+ model = "Arm Morello Fixed Virtual Platform";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure-firmware@ff000000 {
+ reg = <0 0xff000000 0 0x01000000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU2>;
+ };
+ core1 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+ CPU0: cpu0@0 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ };
+ CPU1: cpu1@100 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ };
+ CPU2: cpu2@10000 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x10000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 1>;
+ };
+ CPU3: cpu3@10100 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x10100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 1>;
+ };
+ };
+
+ /* The first bank of memory, memory map is actually provided by UEFI. */
+ memory@80000000 {
+ device_type = "memory";
+ /* [0x80000000-0xffffffff] */
+ reg = <0x00000000 0x80000000 0x0 0x80000000>;
+ };
+
+ memory@8080000000 {
+ device_type = "memory";
+ /* [0x8080000000-0x83ffffffff] */
+ reg = <0x00000080 0x80000000 0x1 0x80000000>;
+ };
+
+ virtio_block@1c170000 {
+ compatible = "virtio,mmio";
+ reg = <0x0 0x1c170000 0x0 0x200>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ virtio_net@1c180000 {
+ compatible = "virtio,mmio";
+ reg = <0x0 0x1c180000 0x0 0x200>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ virtio_rng@1c190000 {
+ compatible = "virtio,mmio";
+ reg = <0x0 0x1c190000 0x0 0x200>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ virtio_p9@1c1a0000 {
+ compatible = "virtio,mmio";
+ reg = <0x0 0x1c1a0000 0x0 0x200>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ethernet@1d100000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x0 0x1d100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ kmi@1c150000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x0 0x1c150000 0x0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi@1c160000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x0 0x1c160000 0x0 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ firmware {
+ scmi {
+ compatible = "arm,scmi";
+ mbox-names = "tx", "rx";
+ mboxes = <&mailbox 1 0>, <&mailbox 1 1>;
+ shmem = <&cpu_scp_hpri0>, <&cpu_scp_hpri1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_dvfs: protocol@13 {
+ reg = <0x13>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ bp_clock24mhz: clock24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "bp:clock24mhz";
+ };
+};
+
+&gic {
+ reg = <0x0 0x30000000 0 0x10000>, /* GICD */
+ <0x0 0x300c0000 0 0x80000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/fdts/morello-soc.dts b/fdts/morello-soc.dts
new file mode 100644
index 0000000..5f147b7
--- /dev/null
+++ b/fdts/morello-soc.dts
@@ -0,0 +1,268 @@
+/*
+ * Copyright (c) 2021-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+ model = "Arm Morello System Development Platform";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure-firmware@ff000000 {
+ reg = <0 0xff000000 0 0x01000000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ cpu0@0 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ };
+ cpu1@100 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ };
+ cpu2@10000 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x10000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 1>;
+ };
+ cpu3@10100 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x10100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 1>;
+ };
+ };
+
+ /* The first bank of memory, memory map is actually provided by UEFI. */
+ memory@80000000 {
+ device_type = "memory";
+ /* [0x80000000-0xffffffff] */
+ reg = <0x00000000 0x80000000 0x0 0x7F000000>;
+ };
+
+ memory@8080000000 {
+ device_type = "memory";
+ /* [0x8080000000-0x83f7ffffff] */
+ reg = <0x00000080 0x80000000 0x3 0x78000000>;
+ };
+
+ smmu_pcie: iommu@4f400000 {
+ compatible = "arm,smmu-v3";
+ reg = <0 0x4f400000 0 0x40000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+ msi-parent = <&its2 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ pcie_ctlr: pcie@28c0000000 {
+ compatible = "pci-host-ecam-generic";
+ device_type = "pci";
+ reg = <0x28 0xC0000000 0 0x10000000>;
+ bus-range = <0 255>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x6F000000 0x00 0x00800000>,
+ <0x02000000 0x00 0x60000000 0x00 0x60000000 0x00 0x0F000000>,
+ <0x42000000 0x09 0x00000000 0x09 0x00000000 0x1F 0xC0000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 172 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_pcie 0 0x10000>;
+ iommu-map = <0 &smmu_pcie 0 0x10000>;
+ status = "okay";
+ };
+
+ smmu_ccix: iommu@4f000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0 0x4f000000 0 0x40000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 230 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+ msi-parent = <&its1 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ ccix_pcie_ctlr: pcie@4fc0000000 {
+ compatible = "pci-host-ecam-generic";
+ device_type = "pci";
+ reg = <0x4F 0xC0000000 0 0x10000000>;
+ bus-range = <0 255>;
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x7F000000 0x00 0x00800000>,
+ <0x02000000 0x00 0x70000000 0x00 0x70000000 0x00 0x0F000000>,
+ <0x42000000 0x30 0x00000000 0x30 0x00000000 0x1F 0xC0000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 201 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 202 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 203 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 204 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_ccix 0 0x10000>;
+ iommu-map = <0 &smmu_ccix 0 0x10000>;
+ status = "okay";
+ };
+
+ smmu_dp: iommu@2ce00000 {
+ compatible = "arm,smmu-v3";
+ reg = <0 0x2ce00000 0 0x40000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror", "cmdq-sync";
+ #iommu-cells = <1>;
+ };
+
+ dp0: display@2cc00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,mali-d32", "arm,mali-d71";
+ reg = <0 0x2cc00000 0 0x20000>;
+ interrupts = <0 69 4>;
+ interrupt-names = "DPU";
+ clocks = <&dpu_aclk>;
+ clock-names = "aclk";
+ iommus = <&smmu_dp 0>, <&smmu_dp 1>, <&smmu_dp 2>, <&smmu_dp 3>,
+ <&smmu_dp 8>;
+
+ pl0: pipeline@0 {
+ reg = <0>;
+ clocks = <&scmi_clk 1>;
+ clock-names = "pxclk";
+ pl_id = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_pl0_out0: endpoint {
+ remote-endpoint = <&tda998x_0_input>;
+ };
+ };
+ };
+ };
+ };
+
+ i2c@1c0f0000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x1c0f0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <500>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dpu_aclk>;
+
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ video-ports = <0x234501>;
+ port {
+ tda998x_0_input: endpoint {
+ remote-endpoint = <&dp_pl0_out0>;
+ };
+ };
+ };
+ };
+
+ dpu_aclk: dpu_aclk {
+ /* 77.1 MHz derived from 24 MHz reference clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <350000000>;
+ clock-output-names = "aclk";
+ };
+
+ firmware {
+ scmi {
+ compatible = "arm,scmi";
+ mbox-names = "tx", "rx";
+ mboxes = <&mailbox 1 0>, <&mailbox 1 1>;
+ shmem = <&cpu_scp_hpri0>, <&cpu_scp_hpri1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ scmi_dvfs: protocol@13 {
+ reg = <0x13>;
+ #clock-cells = <1>;
+ };
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+};
+
+&gic {
+ reg = <0x0 0x30000000 0 0x10000>, /* GICD */
+ <0x0 0x300c0000 0 0x80000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its1: msi-controller@30040000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30040000 0x0 0x20000>;
+ };
+
+ its2: msi-controller@30060000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30060000 0x0 0x20000>;
+ };
+
+ its_ccix: msi-controller@30080000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30080000 0x0 0x20000>;
+ };
+
+ its_pcie: msi-controller@300a0000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x300a0000 0x0 0x20000>;
+ };
+};
diff --git a/fdts/morello.dtsi b/fdts/morello.dtsi
new file mode 100644
index 0000000..20640c5
--- /dev/null
+++ b/fdts/morello.dtsi
@@ -0,0 +1,106 @@
+/*
+ * Copyright (c) 2020-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "arm,morello";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spe-pmu {
+ compatible = "arm,statistical-profiling-extension-v1";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ mailbox: mhu@45000000 {
+ compatible = "arm,mhu-doorbell", "arm,primecell";
+ reg = <0x0 0x45000000 0x0 0x1000>;
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_lpri_rx",
+ "mhu_hpri_rx";
+ #mbox-cells = <2>;
+ mbox-name = "ARM-MHU";
+ clocks = <&soc_refclk50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ sram: sram@45200000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x06000000 0x0 0x8000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x06000000 0x8000>;
+
+ cpu_scp_hpri0: scp-sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x80>;
+ };
+
+ cpu_scp_hpri1: scp-sram@80 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x80 0x80>;
+ };
+ };
+
+ soc_refclk50mhz: refclk50mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ soc_uartclk: uartclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "uartclk";
+ };
+
+ soc_uart0: serial@2a400000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x2a400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk50mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "okay";
+ };
+};
diff --git a/fdts/n1sdp-multi-chip.dts b/fdts/n1sdp-multi-chip.dts
new file mode 100644
index 0000000..852b899
--- /dev/null
+++ b/fdts/n1sdp-multi-chip.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2022, Arm Limited.
+ */
+
+#include "n1sdp-single-chip.dts"
+
+/ {
+ cpus {
+ cpu4@100000000 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x1 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu5@100000100 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x1 0x00000100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu6@100010000 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x1 0x00010000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu7@100010100 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x1 0x00010100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ };
+
+ /* Remote N1SDP board address is mapped at offset 4TB.
+ * First DRAM Bank of remote N1SDP board is mapped at 4TB + 2GB.
+ */
+ memory@40080000000 {
+ device_type = "memory";
+ reg = <0x00000400 0x80000000 0x0 0x80000000>,
+ <0x00000480 0x80000000 0x3 0x80000000>;
+ numa-node-id = <1>;
+ };
+
+ distance-map {
+ compatible = "numa-distance-map-v1";
+ distance-matrix = <0 0 10>,
+ <0 1 20>,
+ <1 1 10>;
+ };
+
+ smmu_secondary_pcie: iommu@4004f400000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x400 0x4f400000 0 0x40000>;
+ interrupts = <GIC_SPI 715 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 716 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 717 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "cmdq-sync", "gerror";
+ msi-parent = <&its2_secondary 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ pcie_secondary_ctlr: pcie@40070000000 {
+ compatible = "arm,n1sdp-pcie";
+ device_type = "pci";
+ reg = <0x400 0x70000000 0 0x1200000>;
+ bus-range = <0 0xff>;
+ linux,pci-domain = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x00000000 0x400 0x75200000 0x00 0x00010000>,
+ <0x02000000 0x00 0x71200000 0x400 0x71200000 0x00 0x04000000>,
+ <0x42000000 0x09 0x00000000 0x409 0x00000000 0x20 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 649 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 650 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 651 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 652 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_secondary_pcie 0 0x10000>;
+ iommu-map = <0 &smmu_secondary_pcie 0 0x10000>;
+ numa-node-id = <1>;
+ status = "okay";
+ };
+
+};
+
+&gic {
+ #redistributor-regions = <2>;
+ reg = <0x0 0x30000000 0 0x10000>, /* GICD */
+ <0x0 0x300c0000 0 0x80000>, /* GICR */
+ <0x400 0x300c0000 0 0x80000>; /* GICR */
+
+ its2_secondary: its@40030060000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x400 0x30060000 0x0 0x20000>;
+ };
+
+ its_secondary_pcie: its@400300a0000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x400 0x300a0000 0x0 0x20000>;
+ };
+};
+
+&pcie_ctlr {
+ numa-node-id = <0>;
+};
+
+&ccix_pcie_ctlr {
+ numa-node-id = <0>;
+};
diff --git a/fdts/n1sdp-single-chip.dts b/fdts/n1sdp-single-chip.dts
new file mode 100644
index 0000000..3c091ac
--- /dev/null
+++ b/fdts/n1sdp-single-chip.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2020, Arm Limited.
+ */
+
+/dts-v1/;
+
+#include "n1sdp.dtsi"
+
+/ {
+ model = "Arm Neoverse N1 System Development Platform";
+ compatible = "arm,neoverse-n1-sdp", "arm,neoverse-n1-soc";
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* This configuration assumes that standard setup with two DIMM modules.
+ * In the first 2GB of DRAM bank the top 16MB are reserved by firmware as secure memory.
+ * This configuration assumes 16GB of total DRAM being populated.
+ */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000080 0x80000000 0x3 0x80000000>;
+ numa-node-id = <0>;
+ };
+
+ soc_refclk60mhz: refclk60mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <60000000>;
+ clock-output-names = "iofpga_clk";
+ };
+
+ soc_hdlcdclk: hdlcdclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <23750000>;
+ clock-output-names = "hdlcdclk";
+ };
+
+ hdlcd: hdlcd@1c050000 {
+ compatible = "arm,hdlcd";
+ reg = <0 0x1c050000 0 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_hdlcdclk>;
+ clock-names = "pxlclk";
+
+ port {
+ hdlcd0_output: endpoint {
+ remote-endpoint = <&tda998x_0_input>;
+ };
+ };
+ };
+
+ i2c@1c0f0000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x0 0x1c0f0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_refclk60mhz>;
+
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ port {
+ tda998x_0_input: endpoint {
+ remote-endpoint = <&hdlcd0_output>;
+ };
+ };
+ };
+ };
+};
+
+&pcie_ctlr {
+ status = "okay";
+};
+
+&ccix_pcie_ctlr {
+ status = "okay";
+};
+
+&soc_uart0 {
+ status = "okay";
+};
diff --git a/fdts/n1sdp.dtsi b/fdts/n1sdp.dtsi
new file mode 100644
index 0000000..88f8734
--- /dev/null
+++ b/fdts/n1sdp.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2020, Arm Limited.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0@0 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu1@100 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu2@10000 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x0 0x10000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu3@10100 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x0 0x10100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spe-pmu {
+ compatible = "arm,statistical-profiling-extension-v1";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ soc_refclk100mhz: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ soc_uartclk: uartclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "uartclk";
+ };
+
+ soc {
+ compatible = "arm,neoverse-n1-soc", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@30000000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ reg = <0x0 0x30000000 0 0x10000>, /* GICD */
+ <0x0 0x300c0000 0 0x80000>; /* GICR */
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its1: its@30040000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30040000 0x0 0x20000>;
+ };
+
+ its2: its@30060000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30060000 0x0 0x20000>;
+ };
+
+ its_ccix: its@30080000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30080000 0x0 0x20000>;
+ };
+
+ its_pcie: its@300a0000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x300a0000 0x0 0x20000>;
+ };
+ };
+
+ smmu_ccix: iommu@4f000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0 0x4f000000 0 0x40000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 230 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "cmdq-sync", "gerror";
+ msi-parent = <&its1 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ smmu_pcie: iommu@4f400000 {
+ compatible = "arm,smmu-v3";
+ reg = <0 0x4f400000 0 0x40000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "cmdq-sync", "gerror";
+ msi-parent = <&its2 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ pcie_ctlr: pcie@70000000 {
+ compatible = "arm,n1sdp-pcie";
+ device_type = "pci";
+ reg = <0 0x70000000 0 0x1200000>;
+ bus-range = <0 17>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x75200000 0x00 0x00010000>,
+ <0x02000000 0x00 0x71200000 0x00 0x71200000 0x00 0x04000000>,
+ <0x42000000 0x09 0x00000000 0x09 0x00000000 0x20 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 172 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_pcie 0 0x10000>;
+ iommu-map = <0 &smmu_pcie 0 0x10000>;
+ status = "disabled";
+ };
+
+ ccix_pcie_ctlr: pcie@68000000 {
+ compatible = "arm,n1sdp-pcie";
+ device_type = "pci";
+ reg = <0 0x68000000 0 0x1200000>;
+ bus-range = <0 17>;
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x6d200000 0x00 0x00010000>,
+ <0x02000000 0x00 0x69200000 0x00 0x69200000 0x00 0x04000000>,
+ <0x42000000 0x29 0x00000000 0x29 0x00000000 0x20 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 201 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 202 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 203 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 204 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_ccix 0 0x10000>;
+ iommu-map = <0 &smmu_ccix 0 0x10000>;
+ status = "disabled";
+ };
+
+ soc_uart0: serial@2a400000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x2a400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/fdts/rtsm_ve-motherboard.dtsi b/fdts/rtsm_ve-motherboard.dtsi
new file mode 100644
index 0000000..0a824b3
--- /dev/null
+++ b/fdts/rtsm_ve-motherboard.dtsi
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Copyright (c) 2012-2022 ARM Ltd.
+ *
+ * Versatile Express (VE) system model
+ * Motherboard component
+ *
+ * VEMotherBoard.lisa
+ */
+/ {
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ v2m_fixed_3v3: v2m-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 63500000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+
+ bus@8000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+ motherboard-bus@8000000 {
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ flash@0 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ ethernet@202000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ iofpga-bus@300000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x210000>;
+
+ v2m_sysreg: sysreg@10000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_sysctl: sysctl@20000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+ };
+
+ aaci@40000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ mmc@50000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9>, <10>;
+ cd-gpios = <&v2m_sysreg 0 0>;
+ wp-gpios = <&v2m_sysreg 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi@60000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi@70000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ v2m_serial0: serial@90000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: serial@a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: serial@b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: serial@c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ watchdog@f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ virtio@130000 {
+ compatible = "virtio,mmio";
+ reg = <0x130000 0x200>;
+ interrupts = <42>;
+ };
+
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd@1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+ clock-names = "clcdclk", "apb_pclk";
+ memory-region = <&vram>;
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&panel_in>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/fdts/stm32mp1-cot-descriptors.dtsi b/fdts/stm32mp1-cot-descriptors.dtsi
new file mode 100644
index 0000000..eb632ff
--- /dev/null
+++ b/fdts/stm32mp1-cot-descriptors.dtsi
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2020-2022, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/nv_cntr_ids.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <tools_share/tbbr_oid.h>
+
+cot {
+ manifests {
+ compatible = "arm, cert-descs";
+
+ stm32mp_cfg_cert: stm32mp_cfg_cert {
+ root-certificate;
+ image-id = <STM32MP_CONFIG_CERT_ID>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ hw_config_hash: hw_config_hash {
+ oid = HW_CONFIG_HASH_OID;
+ };
+
+ fw_config_hash: fw_config_hash {
+ oid = FW_CONFIG_HASH_OID;
+ };
+ };
+
+ trusted_key_cert: trusted_key_cert {
+ root-certificate;
+ image-id = <TRUSTED_KEY_CERT_ID>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ trusted_world_pk: trusted_world_pk {
+ oid = TRUSTED_WORLD_PK_OID;
+ };
+ non_trusted_world_pk: non_trusted_world_pk {
+ oid = NON_TRUSTED_WORLD_PK_OID;
+ };
+ };
+
+ trusted_os_fw_key_cert: trusted_os_fw_key_cert {
+ image-id = <TRUSTED_OS_FW_KEY_CERT_ID>;
+ parent = <&trusted_key_cert>;
+ signing-key = <&trusted_world_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ tos_fw_content_pk: tos_fw_content_pk {
+ oid = TRUSTED_OS_FW_CONTENT_CERT_PK_OID;
+ };
+ };
+
+ trusted_os_fw_content_cert: trusted_os_fw_content_cert {
+ image-id = <TRUSTED_OS_FW_CONTENT_CERT_ID>;
+ parent = <&trusted_os_fw_key_cert>;
+ signing-key = <&tos_fw_content_pk>;
+ antirollback-counter = <&trusted_nv_counter>;
+
+ tos_fw_hash: tos_fw_hash {
+ oid = TRUSTED_OS_FW_HASH_OID;
+ };
+ tos_fw_extra1_hash: tos_fw_extra1_hash {
+ oid = TRUSTED_OS_FW_EXTRA1_HASH_OID;
+ };
+ tos_fw_extra2_hash: tos_fw_extra2_hash {
+ oid = TRUSTED_OS_FW_EXTRA2_HASH_OID;
+ };
+ tos_fw_config_hash: tos_fw_config_hash {
+ oid = TRUSTED_OS_FW_CONFIG_HASH_OID;
+ };
+ };
+
+ non_trusted_fw_key_cert: non_trusted_fw_key_cert {
+ image-id = <NON_TRUSTED_FW_KEY_CERT_ID>;
+ parent = <&trusted_key_cert>;
+ signing-key = <&non_trusted_world_pk>;
+ antirollback-counter = <&non_trusted_nv_counter>;
+
+ nt_fw_content_pk: nt_fw_content_pk {
+ oid = NON_TRUSTED_FW_CONTENT_CERT_PK_OID;
+ };
+ };
+
+ non_trusted_fw_content_cert: non_trusted_fw_content_cert {
+ image-id = <NON_TRUSTED_FW_CONTENT_CERT_ID>;
+ parent = <&non_trusted_fw_key_cert>;
+ signing-key = <&nt_fw_content_pk>;
+ antirollback-counter = <&non_trusted_nv_counter>;
+
+ nt_world_bl_hash: nt_world_bl_hash {
+ oid = NON_TRUSTED_WORLD_BOOTLOADER_HASH_OID;
+ };
+ };
+ };
+
+ images {
+ compatible = "arm, img-descs";
+
+ hw_config {
+ image-id = <HW_CONFIG_ID>;
+ parent = <&stm32mp_cfg_cert>;
+ hash = <&hw_config_hash>;
+ };
+
+ fw_config {
+ image-id = <FW_CONFIG_ID>;
+ parent = <&stm32mp_cfg_cert>;
+ hash = <&fw_config_hash>;
+ };
+
+ bl32_image {
+ image-id = <BL32_IMAGE_ID>;
+ parent = <&trusted_os_fw_content_cert>;
+ hash = <&tos_fw_hash>;
+ };
+
+ bl32_extra1_image {
+ image-id = <BL32_EXTRA1_IMAGE_ID>;
+ parent = <&trusted_os_fw_content_cert>;
+ hash = <&tos_fw_extra1_hash>;
+ };
+
+ bl32_extra2_image {
+ image-id = <BL32_EXTRA2_IMAGE_ID>;
+ parent = <&trusted_os_fw_content_cert>;
+ hash = <&tos_fw_extra2_hash>;
+ };
+
+ tos_fw_config {
+ image-id = <TOS_FW_CONFIG_ID>;
+ parent = <&trusted_os_fw_content_cert>;
+ hash = <&tos_fw_config_hash>;
+ };
+
+ bl33_image {
+ image-id = <BL33_IMAGE_ID>;
+ parent = <&non_trusted_fw_content_cert>;
+ hash = <&nt_world_bl_hash>;
+ };
+ };
+};
+
+non_volatile_counters: non_volatile_counters {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ trusted_nv_counter: trusted_nv_counter {
+ id = <TRUSTED_NV_CTR_ID>;
+ oid = TRUSTED_FW_NVCOUNTER_OID;
+ };
+
+ non_trusted_nv_counter: non_trusted_nv_counter {
+ id = <NON_TRUSTED_NV_CTR_ID>;
+ oid = NON_TRUSTED_FW_NVCOUNTER_OID;
+ };
+};
diff --git a/fdts/stm32mp13-bl2.dtsi b/fdts/stm32mp13-bl2.dtsi
new file mode 100644
index 0000000..836e9ae
--- /dev/null
+++ b/fdts/stm32mp13-bl2.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ */
+
+/ {
+ aliases {
+#if !STM32MP_EMMC && !STM32MP_SDMMC
+ /delete-property/ mmc0;
+ /delete-property/ mmc1;
+#endif
+ };
+
+ soc {
+#if !STM32MP_USB_PROGRAMMER
+ /delete-node/ usb-otg@49000000;
+#endif
+#if !STM32MP_RAW_NAND
+ /delete-node/ memory-controller@58002000;
+#endif
+#if !STM32MP_SPI_NAND && !STM32MP_SPI_NOR
+ /delete-node/ spi@58003000;
+#endif
+#if !STM32MP_EMMC && !STM32MP_SDMMC
+ /delete-node/ mmc@58005000;
+ /delete-node/ mmc@58007000;
+#endif
+#if !STM32MP_USB_PROGRAMMER
+ /delete-node/ usbh-ohci@5800c000;
+ /delete-node/ usbh-ehci@5800d000;
+#endif
+#if !STM32MP_USB_PROGRAMMER
+ /delete-node/ usbphyc@5a006000;
+#endif
+
+ pinctrl@50002000 {
+#if !STM32MP_EMMC && !STM32MP_SDMMC
+ /delete-node/ sdmmc1-b4-0;
+ /delete-node/ sdmmc2-b4-0;
+#endif
+ };
+ };
+
+ /*
+ * UUID's here are UUID RFC 4122 compliant meaning fieds are stored in
+ * network order (big endian)
+ */
+
+ st-io_policies {
+ fip-handles {
+ compatible = "st,io-fip-handle";
+ fw_cfg_uuid = "5807e16a-8459-47be-8ed5-648e8dddab0e";
+ bl32_uuid = "05d0e189-53dc-1347-8d2b-500a4b7a3e38";
+ bl32_extra1_uuid = "0b70c29b-2a5a-7840-9f65-0a5682738288";
+ bl32_extra2_uuid = "8ea87bb1-cfa2-3f4d-85fd-e7bba50220d9";
+ bl33_uuid = "d6d0eea7-fcea-d54b-9782-9934f234b6e4";
+ hw_cfg_uuid = "08b8f1d9-c9cf-9349-a962-6fbc6b7265cc";
+ tos_fw_cfg_uuid = "26257c1a-dbc6-7f47-8d96-c4c4b0248021";
+#if TRUSTED_BOARD_BOOT
+ stm32mp_cfg_cert_uuid = "501d8dd2-8bce-49a5-84eb-559a9f2eaeaf";
+ t_key_cert_uuid = "827ee890-f860-e411-a1b4-777a21b4f94c";
+ tos_fw_key_cert_uuid = "9477d603-fb60-e411-85dd-b7105b8cee04";
+ nt_fw_key_cert_uuid = "8ad5832a-fb60-e411-8aaf-df30bbc49859";
+ tos_fw_content_cert_uuid = "a49f4411-5e63-e411-8728-3f05722af33d";
+ nt_fw_content_cert_uuid = "8ec4c1f3-5d63-e411-a7a9-87ee40b23fa7";
+#endif
+ };
+ };
+
+#if TRUSTED_BOARD_BOOT
+ tb_fw-config {
+ compatible = "arm,tb_fw";
+
+ /* Disable authentication for development */
+ disable_auth = <0x0>;
+
+ /* Use SRAM2 to manage the mbedTLS heap */
+ mbedtls_heap_addr = <0x0 0x30004000>; /* SRAM2_BASE */
+ mbedtls_heap_size = <0x2000>; /* SRAM2_SIZE */
+ };
+
+#include "stm32mp1-cot-descriptors.dtsi"
+#endif
+
+};
diff --git a/fdts/stm32mp13-ddr.dtsi b/fdts/stm32mp13-ddr.dtsi
new file mode 100644
index 0000000..56eb36e
--- /dev/null
+++ b/fdts/stm32mp13-ddr.dtsi
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+&ddr {
+ st,mem-name = DDR_MEM_NAME;
+ st,mem-speed = <DDR_MEM_SPEED>;
+ st,mem-size = <DDR_MEM_SIZE>;
+
+ st,ctl-reg = <
+ DDR_MSTR
+ DDR_MRCTRL0
+ DDR_MRCTRL1
+ DDR_DERATEEN
+ DDR_DERATEINT
+ DDR_PWRCTL
+ DDR_PWRTMG
+ DDR_HWLPCTL
+ DDR_RFSHCTL0
+ DDR_RFSHCTL3
+ DDR_CRCPARCTL0
+ DDR_ZQCTL0
+ DDR_DFITMG0
+ DDR_DFITMG1
+ DDR_DFILPCFG0
+ DDR_DFIUPD0
+ DDR_DFIUPD1
+ DDR_DFIUPD2
+ DDR_DFIPHYMSTR
+ DDR_ODTMAP
+ DDR_DBG0
+ DDR_DBG1
+ DDR_DBGCMD
+ DDR_POISONCFG
+ DDR_PCCFG
+ >;
+
+ st,ctl-timing = <
+ DDR_RFSHTMG
+ DDR_DRAMTMG0
+ DDR_DRAMTMG1
+ DDR_DRAMTMG2
+ DDR_DRAMTMG3
+ DDR_DRAMTMG4
+ DDR_DRAMTMG5
+ DDR_DRAMTMG6
+ DDR_DRAMTMG7
+ DDR_DRAMTMG8
+ DDR_DRAMTMG14
+ DDR_ODTCFG
+ >;
+
+ st,ctl-map = <
+ DDR_ADDRMAP1
+ DDR_ADDRMAP2
+ DDR_ADDRMAP3
+ DDR_ADDRMAP4
+ DDR_ADDRMAP5
+ DDR_ADDRMAP6
+ DDR_ADDRMAP9
+ DDR_ADDRMAP10
+ DDR_ADDRMAP11
+ >;
+
+ st,ctl-perf = <
+ DDR_SCHED
+ DDR_SCHED1
+ DDR_PERFHPR1
+ DDR_PERFLPR1
+ DDR_PERFWR1
+ DDR_PCFGR_0
+ DDR_PCFGW_0
+ DDR_PCFGQOS0_0
+ DDR_PCFGQOS1_0
+ DDR_PCFGWQOS0_0
+ DDR_PCFGWQOS1_0
+ >;
+
+ st,phy-reg = <
+ DDR_PGCR
+ DDR_ACIOCR
+ DDR_DXCCR
+ DDR_DSGCR
+ DDR_DCR
+ DDR_ODTCR
+ DDR_ZQ0CR1
+ DDR_DX0GCR
+ DDR_DX1GCR
+ >;
+
+ st,phy-timing = <
+ DDR_PTR0
+ DDR_PTR1
+ DDR_PTR2
+ DDR_DTPR0
+ DDR_DTPR1
+ DDR_DTPR2
+ DDR_MR0
+ DDR_MR1
+ DDR_MR2
+ DDR_MR3
+ >;
+};
+
+#undef DDR_MEM_NAME
+#undef DDR_MEM_SPEED
+#undef DDR_MEM_SIZE
+#undef DDR_MSTR
+#undef DDR_MRCTRL0
+#undef DDR_MRCTRL1
+#undef DDR_DERATEEN
+#undef DDR_DERATEINT
+#undef DDR_PWRCTL
+#undef DDR_PWRTMG
+#undef DDR_HWLPCTL
+#undef DDR_RFSHCTL0
+#undef DDR_RFSHCTL3
+#undef DDR_RFSHTMG
+#undef DDR_CRCPARCTL0
+#undef DDR_DRAMTMG0
+#undef DDR_DRAMTMG1
+#undef DDR_DRAMTMG2
+#undef DDR_DRAMTMG3
+#undef DDR_DRAMTMG4
+#undef DDR_DRAMTMG5
+#undef DDR_DRAMTMG6
+#undef DDR_DRAMTMG7
+#undef DDR_DRAMTMG8
+#undef DDR_DRAMTMG14
+#undef DDR_ZQCTL0
+#undef DDR_DFITMG0
+#undef DDR_DFITMG1
+#undef DDR_DFILPCFG0
+#undef DDR_DFIUPD0
+#undef DDR_DFIUPD1
+#undef DDR_DFIUPD2
+#undef DDR_DFIPHYMSTR
+#undef DDR_ADDRMAP1
+#undef DDR_ADDRMAP2
+#undef DDR_ADDRMAP3
+#undef DDR_ADDRMAP4
+#undef DDR_ADDRMAP5
+#undef DDR_ADDRMAP6
+#undef DDR_ADDRMAP9
+#undef DDR_ADDRMAP10
+#undef DDR_ADDRMAP11
+#undef DDR_ODTCFG
+#undef DDR_ODTMAP
+#undef DDR_SCHED
+#undef DDR_SCHED1
+#undef DDR_PERFHPR1
+#undef DDR_PERFLPR1
+#undef DDR_PERFWR1
+#undef DDR_DBG0
+#undef DDR_DBG1
+#undef DDR_DBGCMD
+#undef DDR_POISONCFG
+#undef DDR_PCCFG
+#undef DDR_PCFGR_0
+#undef DDR_PCFGW_0
+#undef DDR_PCFGQOS0_0
+#undef DDR_PCFGQOS1_0
+#undef DDR_PCFGWQOS0_0
+#undef DDR_PCFGWQOS1_0
+#undef DDR_PGCR
+#undef DDR_PTR0
+#undef DDR_PTR1
+#undef DDR_PTR2
+#undef DDR_ACIOCR
+#undef DDR_DXCCR
+#undef DDR_DSGCR
+#undef DDR_DCR
+#undef DDR_DTPR0
+#undef DDR_DTPR1
+#undef DDR_DTPR2
+#undef DDR_MR0
+#undef DDR_MR1
+#undef DDR_MR2
+#undef DDR_MR3
+#undef DDR_ODTCR
+#undef DDR_ZQ0CR1
+#undef DDR_DX0GCR
+#undef DDR_DX1GCR
diff --git a/fdts/stm32mp13-ddr3-1x4Gb-1066-binF.dtsi b/fdts/stm32mp13-ddr3-1x4Gb-1066-binF.dtsi
new file mode 100644
index 0000000..a5f7989
--- /dev/null
+++ b/fdts/stm32mp13-ddr3-1x4Gb-1066-binF.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ *
+ * STM32MP135C DISCO BOARD configuration
+ * 1x DDR3L 4Gb, 16-bit, 533MHz.
+ * Reference used MT41K256M16TW-107 P from Micron
+ *
+ * DDR type / Platform DDR3/3L
+ * freq 533MHz
+ * width 16
+ * datasheet 1
+ * DDR density 4
+ * timing mode optimized
+ * Scheduling/QoS options : type = 6
+ * address mapping : RBC
+ * Tc > + 85C : N
+ */
+#define DDR_MEM_NAME "DDR3-1066 bin F 1x4Gb 533MHz v1.53"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x20000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041B
+#define DDR_DRAMTMG2 0x0607080F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x07040607
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02050105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000F01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x00000001
+#define DDR_PERFLPR1 0x04000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00000000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x00100009
+#define DDR_PCFGQOS1_0 0x00000020
+#define DDR_PCFGWQOS0_0 0x01100B03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x36D477D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000830
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX1GCR 0x0000CE81
+
+#include "stm32mp13-ddr.dtsi"
diff --git a/fdts/stm32mp13-fw-config.dtsi b/fdts/stm32mp13-fw-config.dtsi
new file mode 100644
index 0000000..4f3bb72
--- /dev/null
+++ b/fdts/stm32mp13-fw-config.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common/tbbr/tbbr_img_def.h>
+#include <dt-bindings/soc/stm32mp13-tzc400.h>
+
+#include <platform_def.h>
+
+#ifndef DDR_SIZE
+#error "DDR_SIZE is not defined"
+#endif
+
+#define DDR_NS_BASE STM32MP_DDR_BASE
+#define DDR_SEC_SIZE STM32MP_DDR_S_SIZE
+#define DDR_SEC_BASE (STM32MP_DDR_BASE + (DDR_SIZE - DDR_SEC_SIZE))
+#define DDR_NS_SIZE (DDR_SEC_BASE - DDR_NS_BASE)
+
+/dts-v1/;
+
+/ {
+ dtb-registry {
+ compatible = "fconf,dyn_cfg-dtb_registry";
+
+ hw-config {
+ load-address = <0x0 STM32MP_HW_CONFIG_BASE>;
+ max-size = <STM32MP_HW_CONFIG_MAX_SIZE>;
+ id = <HW_CONFIG_ID>;
+ };
+
+ nt_fw {
+ load-address = <0x0 STM32MP_BL33_BASE>;
+ max-size = <STM32MP_BL33_MAX_SIZE>;
+ id = <BL33_IMAGE_ID>;
+ };
+
+ tos_fw {
+ load-address = <0x0 DDR_SEC_BASE>;
+ max-size = <DDR_SEC_SIZE>;
+ id = <BL32_IMAGE_ID>;
+ };
+ };
+
+ st-mem-firewall {
+ compatible = "st,mem-firewall";
+ memory-ranges = <
+ DDR_NS_BASE DDR_NS_SIZE TZC_REGION_S_NONE TZC_REGION_NSEC_ALL_ACCESS_RDWR
+ DDR_SEC_BASE DDR_SEC_SIZE TZC_REGION_S_RDWR 0>;
+ };
+};
diff --git a/fdts/stm32mp13-pinctrl.dtsi b/fdts/stm32mp13-pinctrl.dtsi
new file mode 100644
index 0000000..879da9c
--- /dev/null
+++ b/fdts/stm32mp13-pinctrl.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com>
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+ i2c4_pins_a: i2c4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 15, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('B', 9, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ usart1_pins_a: usart1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
+ <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */
+ <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */
+ bias-pull-up;
+ };
+ };
+
+ uart8_pins_a: uart8-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+ bias-pull-up;
+ };
+ };
+};
diff --git a/fdts/stm32mp131.dtsi b/fdts/stm32mp131.dtsi
new file mode 100644
index 0000000..543afa5
--- /dev/null
+++ b/fdts/stm32mp131.dtsi
@@ -0,0 +1,584 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/clock/stm32mp13-clks.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/stm32mp13-resets.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&rcc CK_MPU>;
+ clock-names = "cpu";
+ nvmem-cells = <&part_number_otp>;
+ nvmem-cell-names = "part_number";
+ };
+ };
+
+ clocks {
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+ };
+
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ resets = <&rcc USART3_R>;
+ status = "disabled";
+ };
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART4_K>;
+ resets = <&rcc UART4_R>;
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ resets = <&rcc UART5_R>;
+ status = "disabled";
+ };
+
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ resets = <&rcc UART7_R>;
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ resets = <&rcc UART8_R>;
+ status = "disabled";
+ };
+
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ resets = <&rcc USART6_R>;
+ status = "disabled";
+ };
+
+ usbotg_hs: usb-otg@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x40000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ usb33d-supply = <&usb33>;
+ status = "disabled";
+ };
+
+ usart1: serial@4c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ status = "disabled";
+ };
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@4c004000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c004000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts-extended = <&exti 23 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4c005000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c005000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts-extended = <&exti 24 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c5: i2c@4c006000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c006000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts-extended = <&exti 25 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp13-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ secure-interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ secure-interrupt-names = "wakeup";
+ };
+
+ pwr_regulators: pwr@50001000 {
+ compatible = "st,stm32mp1,pwr-reg";
+ reg = <0x50001000 0x10>;
+
+ reg11: reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ reg18: reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ usb33: usb33 {
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp13-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ };
+
+ syscfg: syscon@50020000 {
+ compatible = "st,stm32mp157-syscfg", "syscon";
+ reg = <0x50020000 0x400>;
+ clocks = <&rcc SYSCFG>;
+ };
+
+ hash: hash@54003000 {
+ compatible = "st,stm32mp13-hash";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ status = "disabled";
+ };
+
+ rng: rng@54004000 {
+ compatible = "st,stm32mp13-rng";
+ reg = <0x54004000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ status = "disabled";
+ };
+
+ fmc: memory-controller@58002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+
+ nand-controller@4,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ usbh_ohci: usbh-ohci@5800c000 {
+ compatible = "generic-ohci";
+ reg = <0x5800c000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ usbh_ehci: usbh-ehci@5800d000 {
+ compatible = "generic-ehci";
+ reg = <0x5800d000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ companion = <&usbh_ohci>;
+ status = "disabled";
+ };
+
+ iwdg2: watchdog@5a002000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5a002000 0x400>;
+ clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ ddr: ddr@5a003000 {
+ compatible = "st,stm32mp13-ddr";
+ reg = <0x5a003000 0x550>, <0x5a004000 0x234>;
+ clocks = <&rcc AXIDCG>,
+ <&rcc DDRC1>,
+ <&rcc DDRPHYC>,
+ <&rcc DDRCAPB>,
+ <&rcc DDRPHYCAPB>;
+ clock-names = "axidcg",
+ "ddrc1",
+ "ddrphyc",
+ "ddrcapb",
+ "ddrphycapb";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+
+ iwdg1: watchdog@5c003000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5c003000 0x400>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc IWDG1>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ bsec: efuse@5c005000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cfg0_otp: cfg0_otp@0 {
+ reg = <0x0 0x2>;
+ };
+ part_number_otp: part_number_otp@4 {
+ reg = <0x4 0x2>;
+ };
+ monotonic_otp: monotonic_otp@10 {
+ reg = <0x10 0x4>;
+ };
+ nand_otp: cfg9_otp@24 {
+ reg = <0x24 0x4>;
+ };
+ nand2_otp: cfg10_otp@28 {
+ reg = <0x28 0x4>;
+ };
+ uid_otp: uid_otp@34 {
+ reg = <0x34 0xc>;
+ };
+ hw2_otp: hw2_otp@48 {
+ reg = <0x48 0x4>;
+ };
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ pkh_otp: pkh_otp@60 {
+ reg = <0x60 0x20>;
+ };
+ mac_addr: mac_addr@e4 {
+ reg = <0xe4 0xc>;
+ st,non-secure-otp;
+ };
+ enckey_otp: enckey_otp@170 {
+ reg = <0x170 0x10>;
+ };
+ };
+ /*
+ * Break node order to solve dependency probe issue between
+ * pinctrl and exti.
+ */
+ pinctrl: pinctrl@50002000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp135-pinctrl";
+ ranges = <0 0x50002000 0x8400>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA>;
+ st,bank-name = "GPIOA";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOB>;
+ st,bank-name = "GPIOB";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOC>;
+ st,bank-name = "GPIOC";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&rcc GPIOD>;
+ st,bank-name = "GPIOD";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&rcc GPIOE>;
+ st,bank-name = "GPIOE";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&rcc GPIOF>;
+ st,bank-name = "GPIOF";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&rcc GPIOG>;
+ st,bank-name = "GPIOG";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&rcc GPIOH>;
+ st,bank-name = "GPIOH";
+ ngpios = <15>;
+ gpio-ranges = <&pinctrl 0 112 15>;
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&rcc GPIOI>;
+ st,bank-name = "GPIOI";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 128 8>;
+ };
+ };
+ };
+};
diff --git a/fdts/stm32mp133.dtsi b/fdts/stm32mp133.dtsi
new file mode 100644
index 0000000..bb468c0
--- /dev/null
+++ b/fdts/stm32mp133.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp131.dtsi"
diff --git a/fdts/stm32mp135.dtsi b/fdts/stm32mp135.dtsi
new file mode 100644
index 0000000..b5ebdd9
--- /dev/null
+++ b/fdts/stm32mp135.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp133.dtsi"
diff --git a/fdts/stm32mp135f-dk-fw-config.dts b/fdts/stm32mp135f-dk-fw-config.dts
new file mode 100644
index 0000000..21f8242
--- /dev/null
+++ b/fdts/stm32mp135f-dk-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x20000000 /* 512MB */
+#include "stm32mp13-fw-config.dtsi"
diff --git a/fdts/stm32mp135f-dk.dts b/fdts/stm32mp135f-dk.dts
new file mode 100644
index 0000000..0f06b67
--- /dev/null
+++ b/fdts/stm32mp135f-dk.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/stm32mp13-clksrc.h>
+#include "stm32mp135.dtsi"
+#include "stm32mp13xf.dtsi"
+#include "stm32mp13-ddr3-1x4Gb-1066-binF.dtsi"
+#include "stm32mp13-pinctrl.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP135F-DK Discovery Board";
+ compatible = "st,stm32mp135f-dk", "st,stm32mp135";
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart1;
+ serial2 = &uart8;
+ serial3 = &usart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ v3v3_ao: v3v3_ao {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3_ao";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&bsec {
+ board_id: board_id@f0 {
+ reg = <0xf0 0x4>;
+ st,non-secure-otp;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+};
+
+&hash {
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ clock-frequency = <400000>;
+ status = "disabled";
+ secure-status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+
+ status = "disabled";
+ secure-status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
+ ldo1-supply = <&vin>;
+ ldo4-supply = <&vin>;
+ ldo5-supply = <&vin>;
+ ldo6-supply = <&vin>;
+ vref_ddr-supply = <&vin>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&v3v3_ao>;
+
+ vddcpu: buck1 {
+ regulator-name = "vddcpu";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-over-current-protection;
+ };
+
+ vddcore: buck4 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_adc: ldo1 {
+ regulator-name = "vdd_adc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ v1v8_periph: ldo6 {
+ regulator-name = "v1v8_periph";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ v3v3_sw: pwr_sw2 {
+ regulator-name = "v3v3_sw";
+ regulator-active-discharge = <1>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pka {
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MLAHBS_PLL3
+ CLK_CKPER_HSE
+ CLK_RTC_LSE
+ CLK_SDMMC1_PLL4P
+ CLK_SDMMC2_PLL4P
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_I2C4_HSI
+ CLK_USBO_USBPHY
+ CLK_I2C12_HSI
+ CLK_UART2_HSI
+ CLK_UART4_HSI
+ CLK_SAES_AXI
+ >;
+
+ st,clkdiv = <
+ DIV(DIV_AXI, 0)
+ DIV(DIV_MLAHB, 0)
+ DIV(DIV_APB1, 1)
+ DIV(DIV_APB2, 1)
+ DIV(DIV_APB3, 1)
+ DIV(DIV_APB4, 1)
+ DIV(DIV_APB5, 2)
+ DIV(DIV_APB6, 1)
+ DIV(DIV_RTC, 0)
+ >;
+
+ st,pll_vco {
+ pll1_vco_1300Mhz: pll1-vco-1300Mhz {
+ src = < CLK_PLL12_HSE >;
+ divmn = < 2 80 >;
+ frac = < 0x800 >;
+ };
+
+ pll2_vco_1066Mhz: pll2-vco-1066Mhz {
+ src = < CLK_PLL12_HSE >;
+ divmn = < 2 65 >;
+ frac = < 0x1400 >;
+ };
+
+ pll3_vco_417_8Mhz: pll3-vco-417_8Mhz {
+ src = < CLK_PLL3_HSE >;
+ divmn = < 1 33 >;
+ frac = < 0x1a04 >;
+ };
+
+ pll4_vco_600Mhz: pll4-vco-600Mhz {
+ src = < CLK_PLL4_HSE >;
+ divmn = < 1 49 >;
+ };
+ };
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1:st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+
+ st,pll = < &pll1_cfg1 >;
+
+ pll1_cfg1: pll1_cfg1 {
+ st,pll_vco = < &pll1_vco_1300Mhz >;
+ st,pll_div_pqr = < 0 1 1 >;
+ };
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 266, R = 533 (DDR) */
+ pll2:st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+
+ st,pll = < &pll2_cfg1 >;
+
+ pll2_cfg1: pll2_cfg1 {
+ st,pll_vco = < &pll2_vco_1066Mhz >;
+ st,pll_div_pqr = < 1 1 0 >;
+ };
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 209 */
+ pll3:st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+
+ st,pll = < &pll3_cfg1 >;
+
+ pll3_cfg1: pll3_cfg1 {
+ st,pll_vco = < &pll3_vco_417_8Mhz >;
+ st,pll_div_pqr = < 1 16 1 >;
+ };
+ };
+
+ /* VCO = 600.0 MHz => P = 50, Q = 10, R = 100 */
+ pll4:st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+
+ st,pll = < &pll4_cfg1 >;
+
+ pll4_cfg1: pll4_cfg1 {
+ st,pll_vco = < &pll4_vco_600Mhz >;
+ st,pll_div_pqr = < 11 59 5 >;
+ };
+ };
+};
+
+&rng {
+ status = "okay";
+};
+
+&saes {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8_pins_a>;
+ status = "disabled";
+};
+
+&usart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart1_pins_a>;
+ uart-has-rtscts;
+ status = "disabled";
+};
diff --git a/fdts/stm32mp13xa.dtsi b/fdts/stm32mp13xa.dtsi
new file mode 100644
index 0000000..0ef2fce
--- /dev/null
+++ b/fdts/stm32mp13xa.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
diff --git a/fdts/stm32mp13xc.dtsi b/fdts/stm32mp13xc.dtsi
new file mode 100644
index 0000000..4b30c5c
--- /dev/null
+++ b/fdts/stm32mp13xc.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp13xa.dtsi"
+
+/ {
+ soc {
+ saes: saes@54005000 {
+ compatible = "st,stm32-saes";
+ reg = <0x54005000 0x400>;
+ clocks = <&rcc SAES_K>;
+ resets = <&rcc SAES_R>;
+ status = "disabled";
+ };
+
+ pka: pka@54006000 {
+ compatible = "st,stm32-pka64";
+ reg = <0x54006000 0x2000>;
+ clocks = <&rcc PKA>;
+ resets = <&rcc PKA_R>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/fdts/stm32mp13xd.dtsi b/fdts/stm32mp13xd.dtsi
new file mode 100644
index 0000000..0ef2fce
--- /dev/null
+++ b/fdts/stm32mp13xd.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
diff --git a/fdts/stm32mp13xf.dtsi b/fdts/stm32mp13xf.dtsi
new file mode 100644
index 0000000..887c4e0
--- /dev/null
+++ b/fdts/stm32mp13xf.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp13xd.dtsi"
+
+/ {
+ soc {
+ saes: saes@54005000 {
+ compatible = "st,stm32-saes";
+ reg = <0x54005000 0x400>;
+ clocks = <&rcc SAES_K>;
+ resets = <&rcc SAES_R>;
+ status = "disabled";
+ };
+
+ pka: pka@54006000 {
+ compatible = "st,stm32-pka64";
+ reg = <0x54006000 0x2000>;
+ clocks = <&rcc PKA>;
+ resets = <&rcc PKA_R>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/fdts/stm32mp15-bl2.dtsi b/fdts/stm32mp15-bl2.dtsi
new file mode 100644
index 0000000..5489a62
--- /dev/null
+++ b/fdts/stm32mp15-bl2.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2020-2022 - All Rights Reserved
+ */
+
+/ {
+#if !STM32MP_EMMC && !STM32MP_SDMMC
+ aliases {
+ /delete-property/ mmc0;
+ /delete-property/ mmc1;
+ };
+#endif
+
+ cpus {
+ /delete-node/ cpu@1;
+ };
+
+ /delete-node/ psci;
+
+ soc {
+ /delete-node/ timer@40006000;
+ /delete-node/ timer@44006000;
+#if !STM32MP_USB_PROGRAMMER
+ /delete-node/ usb-otg@49000000;
+#endif
+ /delete-node/ pwr_mcu@50001014;
+ /delete-node/ cryp@54001000;
+ /delete-node/ rng@54003000;
+#if !STM32MP_RAW_NAND
+ /delete-node/ memory-controller@58002000;
+#endif
+#if !STM32MP_SPI_NAND && !STM32MP_SPI_NOR
+ /delete-node/ spi@58003000;
+#endif
+#if !STM32MP_EMMC && !STM32MP_SDMMC
+ /delete-node/ mmc@58005000;
+ /delete-node/ mmc@58007000;
+#endif
+#if !STM32MP_USB_PROGRAMMER
+ /delete-node/ usbphyc@5a006000;
+#endif
+ /delete-node/ spi@5c001000;
+ /delete-node/ rtc@5c004000;
+ /delete-node/ etzpc@5c007000;
+ /delete-node/ stgen@5c008000;
+ /delete-node/ i2c@5c009000;
+ /delete-node/ tamp@5c00a000;
+
+ pinctrl@50002000 {
+#if !STM32MP_RAW_NAND
+ /delete-node/ fmc-0;
+#endif
+#if !STM32MP_SPI_NAND && !STM32MP_SPI_NOR
+ /delete-node/ qspi-clk-0;
+ /delete-node/ qspi-bk1-0;
+ /delete-node/ qspi-bk2-0;
+#endif
+#if !STM32MP_EMMC && !STM32MP_SDMMC
+ /delete-node/ sdmmc1-b4-0;
+ /delete-node/ sdmmc1-dir-0;
+ /delete-node/ sdmmc2-b4-0;
+ /delete-node/ sdmmc2-b4-1;
+ /delete-node/ sdmmc2-d47-0;
+#endif
+#if !STM32MP_USB_PROGRAMMER
+ /delete-node/ usbotg_hs-0;
+ /delete-node/ usbotg-fs-dp-dm-0;
+#endif
+ };
+ };
+
+ /*
+ * UUID's here are UUID RFC 4122 compliant meaning fieds are stored in
+ * network order (big endian)
+ */
+
+ st-io_policies {
+ fip-handles {
+ compatible = "st,io-fip-handle";
+ fw_cfg_uuid = "5807e16a-8459-47be-8ed5-648e8dddab0e";
+ bl32_uuid = "05d0e189-53dc-1347-8d2b-500a4b7a3e38";
+ bl32_extra1_uuid = "0b70c29b-2a5a-7840-9f65-0a5682738288";
+ bl32_extra2_uuid = "8ea87bb1-cfa2-3f4d-85fd-e7bba50220d9";
+ bl33_uuid = "d6d0eea7-fcea-d54b-9782-9934f234b6e4";
+ hw_cfg_uuid = "08b8f1d9-c9cf-9349-a962-6fbc6b7265cc";
+ tos_fw_cfg_uuid = "26257c1a-dbc6-7f47-8d96-c4c4b0248021";
+#if TRUSTED_BOARD_BOOT
+ stm32mp_cfg_cert_uuid = "501d8dd2-8bce-49a5-84eb-559a9f2eaeaf";
+ t_key_cert_uuid = "827ee890-f860-e411-a1b4-777a21b4f94c";
+ tos_fw_key_cert_uuid = "9477d603-fb60-e411-85dd-b7105b8cee04";
+ nt_fw_key_cert_uuid = "8ad5832a-fb60-e411-8aaf-df30bbc49859";
+ tos_fw_content_cert_uuid = "a49f4411-5e63-e411-8728-3f05722af33d";
+ nt_fw_content_cert_uuid = "8ec4c1f3-5d63-e411-a7a9-87ee40b23fa7";
+#endif
+ };
+ };
+
+#if TRUSTED_BOARD_BOOT
+ tb_fw-config {
+ compatible = "arm,tb_fw";
+
+ /* Disable authentication for development */
+ disable_auth = <0x0>;
+
+ /*
+ * The following two entries are placeholders for Mbed TLS
+ * heap information.
+ */
+ mbedtls_heap_addr = <0x0 0x0>;
+ mbedtls_heap_size = <0x0>;
+ };
+
+#include "stm32mp1-cot-descriptors.dtsi"
+#endif
+};
diff --git a/fdts/stm32mp15-bl32.dtsi b/fdts/stm32mp15-bl32.dtsi
new file mode 100644
index 0000000..31b24f6
--- /dev/null
+++ b/fdts/stm32mp15-bl32.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2020-2021 - All Rights Reserved
+ */
+
+/ {
+ aliases {
+ /delete-property/ mmc0;
+ /delete-property/ mmc1;
+ };
+
+ cpus {
+ /delete-node/ cpu@1;
+ };
+
+ /delete-node/ psci;
+
+ soc {
+ /delete-node/ usb-otg@49000000;
+ /delete-node/ hash@54002000;
+ /delete-node/ memory-controller@58002000;
+ /delete-node/ spi@58003000;
+ /delete-node/ mmc@58005000;
+ /delete-node/ mmc@58007000;
+ /delete-node/ usbphyc@5a006000;
+ /delete-node/ spi@5c001000;
+ /delete-node/ stgen@5c008000;
+ /delete-node/ i2c@5c009000;
+
+ pinctrl@50002000 {
+ /delete-node/ fmc-0;
+ /delete-node/ qspi-clk-0;
+ /delete-node/ qspi-bk1-0;
+ /delete-node/ qspi-bk2-0;
+ /delete-node/ sdmmc1-b4-0;
+ /delete-node/ sdmmc1-dir-0;
+ /delete-node/ sdmmc2-b4-0;
+ /delete-node/ sdmmc2-b4-1;
+ /delete-node/ sdmmc2-d47-0;
+ /delete-node/ sdmmc2-d47-1;
+ /delete-node/ sdmmc2-d47-3;
+ /delete-node/ usbotg_hs-0;
+ /delete-node/ usbotg-fs-dp-dm-0;
+ };
+ };
+};
diff --git a/fdts/stm32mp15-ddr.dtsi b/fdts/stm32mp15-ddr.dtsi
new file mode 100644
index 0000000..d0b3a17
--- /dev/null
+++ b/fdts/stm32mp15-ddr.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018-2022, STMicroelectronics - All Rights Reserved
+ */
+
+&ddr {
+ st,mem-name = DDR_MEM_NAME;
+ st,mem-speed = <DDR_MEM_SPEED>;
+ st,mem-size = <DDR_MEM_SIZE>;
+
+ st,ctl-reg = <
+ DDR_MSTR
+ DDR_MRCTRL0
+ DDR_MRCTRL1
+ DDR_DERATEEN
+ DDR_DERATEINT
+ DDR_PWRCTL
+ DDR_PWRTMG
+ DDR_HWLPCTL
+ DDR_RFSHCTL0
+ DDR_RFSHCTL3
+ DDR_CRCPARCTL0
+ DDR_ZQCTL0
+ DDR_DFITMG0
+ DDR_DFITMG1
+ DDR_DFILPCFG0
+ DDR_DFIUPD0
+ DDR_DFIUPD1
+ DDR_DFIUPD2
+ DDR_DFIPHYMSTR
+ DDR_ODTMAP
+ DDR_DBG0
+ DDR_DBG1
+ DDR_DBGCMD
+ DDR_POISONCFG
+ DDR_PCCFG
+ >;
+
+ st,ctl-timing = <
+ DDR_RFSHTMG
+ DDR_DRAMTMG0
+ DDR_DRAMTMG1
+ DDR_DRAMTMG2
+ DDR_DRAMTMG3
+ DDR_DRAMTMG4
+ DDR_DRAMTMG5
+ DDR_DRAMTMG6
+ DDR_DRAMTMG7
+ DDR_DRAMTMG8
+ DDR_DRAMTMG14
+ DDR_ODTCFG
+ >;
+
+ st,ctl-map = <
+ DDR_ADDRMAP1
+ DDR_ADDRMAP2
+ DDR_ADDRMAP3
+ DDR_ADDRMAP4
+ DDR_ADDRMAP5
+ DDR_ADDRMAP6
+ DDR_ADDRMAP9
+ DDR_ADDRMAP10
+ DDR_ADDRMAP11
+ >;
+
+ st,ctl-perf = <
+ DDR_SCHED
+ DDR_SCHED1
+ DDR_PERFHPR1
+ DDR_PERFLPR1
+ DDR_PERFWR1
+ DDR_PCFGR_0
+ DDR_PCFGW_0
+ DDR_PCFGQOS0_0
+ DDR_PCFGQOS1_0
+ DDR_PCFGWQOS0_0
+ DDR_PCFGWQOS1_0
+ DDR_PCFGR_1
+ DDR_PCFGW_1
+ DDR_PCFGQOS0_1
+ DDR_PCFGQOS1_1
+ DDR_PCFGWQOS0_1
+ DDR_PCFGWQOS1_1
+ >;
+
+ st,phy-reg = <
+ DDR_PGCR
+ DDR_ACIOCR
+ DDR_DXCCR
+ DDR_DSGCR
+ DDR_DCR
+ DDR_ODTCR
+ DDR_ZQ0CR1
+ DDR_DX0GCR
+ DDR_DX1GCR
+ DDR_DX2GCR
+ DDR_DX3GCR
+ >;
+
+ st,phy-timing = <
+ DDR_PTR0
+ DDR_PTR1
+ DDR_PTR2
+ DDR_DTPR0
+ DDR_DTPR1
+ DDR_DTPR2
+ DDR_MR0
+ DDR_MR1
+ DDR_MR2
+ DDR_MR3
+ >;
+};
diff --git a/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
new file mode 100644
index 0000000..5d1001d
--- /dev/null
+++ b/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (c) 2018-2022, STMicroelectronics - All Rights Reserved
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 16bits
+ * DDR density: 4Gb
+ * System frequency: 533000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
+ *
+ * Save Date: 2020.02.20, save Time: 18:45:20
+ */
+
+#define DDR_MEM_NAME "DDR3-DDR3L 16bits 533000kHz"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x20000000
+
+#define DDR_MSTR 0x00041401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00070707
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x1F000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x06060606
+#define DDR_ADDRMAP6 0x0F060606
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX2GCR 0x0000CE80
+#define DDR_DX3GCR 0x0000CE80
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
new file mode 100644
index 0000000..6494ceb
--- /dev/null
+++ b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (c) 2018-2022, STMicroelectronics - All Rights Reserved
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 32bits
+ * DDR density: 8Gb
+ * System frequency: 533000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
+ *
+ * Save Date: 2020.02.20, save Time: 18:49:33
+ */
+
+#define DDR_MEM_NAME "DDR3-DDR3L 32bits 533000kHz"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x40000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX3GCR 0x0000CE81
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/fdts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi
new file mode 100644
index 0000000..ff184c2
--- /dev/null
+++ b/fdts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, DH electronics - All Rights Reserved
+ *
+ * STM32MP15xx DHSOM configuration
+ * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
+ * Reference used W634GU6NB15I from Winbond
+ *
+ * DDR type / Platform DDR3/3L
+ * freq 533MHz
+ * width 32
+ * datasheet 0 = W634GU6NB15I / DDR3-1333
+ * DDR density 8
+ * timing mode optimized
+ * address mapping : RBC
+ * Tc > + 85C : J
+ */
+
+#define DDR_MEM_NAME "DDR3L 32bits 2x4Gb 533MHz"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x40000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0040008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B1214
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000248
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX3GCR 0x0000CE81
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/fdts/stm32mp15-fw-config.dtsi b/fdts/stm32mp15-fw-config.dtsi
new file mode 100644
index 0000000..d583672
--- /dev/null
+++ b/fdts/stm32mp15-fw-config.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021-2022, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common/tbbr/tbbr_img_def.h>
+#include <dt-bindings/soc/stm32mp15-tzc400.h>
+
+#include <platform_def.h>
+
+#ifndef DDR_SIZE
+#error "DDR_SIZE is not defined"
+#endif
+
+#define DDR_NS_BASE STM32MP_DDR_BASE
+#ifdef AARCH32_SP_OPTEE
+/* OP-TEE reserved shared memory: located at DDR top or null size */
+#define DDR_SHARE_SIZE STM32MP_DDR_SHMEM_SIZE
+#define DDR_SHARE_BASE (STM32MP_DDR_BASE + (DDR_SIZE - DDR_SHARE_SIZE))
+/* OP-TEE secure memory: located right below OP-TEE reserved shared memory */
+#define DDR_SEC_SIZE STM32MP_DDR_S_SIZE
+#define DDR_SEC_BASE (DDR_SHARE_BASE - DDR_SEC_SIZE)
+#define DDR_NS_SIZE (DDR_SEC_BASE - DDR_NS_BASE)
+#else /* !AARCH32_SP_OPTEE */
+#define DDR_NS_SIZE DDR_SIZE
+#endif /* AARCH32_SP_OPTEE */
+
+/dts-v1/;
+
+/ {
+ dtb-registry {
+ compatible = "fconf,dyn_cfg-dtb_registry";
+
+ hw-config {
+ load-address = <0x0 STM32MP_HW_CONFIG_BASE>;
+ max-size = <STM32MP_HW_CONFIG_MAX_SIZE>;
+ id = <HW_CONFIG_ID>;
+ };
+
+ nt_fw {
+ load-address = <0x0 STM32MP_BL33_BASE>;
+ max-size = <STM32MP_BL33_MAX_SIZE>;
+ id = <BL33_IMAGE_ID>;
+ };
+
+#ifdef AARCH32_SP_OPTEE
+ tos_fw {
+ load-address = <0x0 STM32MP_OPTEE_BASE>;
+ max-size = <STM32MP_OPTEE_SIZE>;
+ id = <BL32_IMAGE_ID>;
+ };
+#else
+ tos_fw {
+ load-address = <0x0 STM32MP_BL32_BASE>;
+ max-size = <STM32MP_BL32_SIZE>;
+ id = <BL32_IMAGE_ID>;
+ };
+
+ tos_fw-config {
+ load-address = <0x0 STM32MP_BL32_DTB_BASE>;
+ max-size = <STM32MP_BL32_DTB_SIZE>;
+ id = <TOS_FW_CONFIG_ID>;
+ };
+#endif
+ };
+
+ st-mem-firewall {
+ compatible = "st,mem-firewall";
+#ifdef AARCH32_SP_OPTEE
+ memory-ranges = <
+ DDR_NS_BASE DDR_NS_SIZE TZC_REGION_S_NONE TZC_REGION_NSEC_ALL_ACCESS_RDWR
+ DDR_SEC_BASE DDR_SEC_SIZE TZC_REGION_S_RDWR 0
+#if STM32MP15_OPTEE_RSV_SHM
+ DDR_SHARE_BASE DDR_SHARE_SIZE TZC_REGION_S_NONE
+ TZC_REGION_ACCESS_RDWR(STM32MP1_TZC_A7_ID)
+#endif
+ >;
+#else
+ memory-ranges = <
+ DDR_NS_BASE DDR_NS_SIZE TZC_REGION_S_NONE TZC_REGION_NSEC_ALL_ACCESS_RDWR>;
+#endif
+ };
+};
diff --git a/fdts/stm32mp15-pinctrl.dtsi b/fdts/stm32mp15-pinctrl.dtsi
new file mode 100644
index 0000000..7d2be0b
--- /dev/null
+++ b/fdts/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2017-2021, STMicroelectronics - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+ fmc_pins_a: fmc-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+ <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+ bias-pull-up;
+ };
+ };
+
+ i2c2_pins_a: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ qspi_clk_pins_a: qspi-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk1_pins_a: qspi-bk1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ qspi_bk2_pins_a: qspi-bk2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_d47_pins_b: sdmmc2-d47-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_d47_pins_c: sdmmc2-d47-2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_d47_pins_d: sdmmc2-d47-3 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_pins_b: uart4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_a: uart7-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+ <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
+ <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_b: uart7-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_c: uart7-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+ bias-disable;
+ };
+ };
+
+ uart8_pins_a: uart8-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+ bias-disable;
+ };
+ };
+
+ usart2_pins_a: usart2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart2_pins_b: usart2-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart2_pins_c: usart2-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart3_pins_a: usart3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_pins_b: usart3-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart3_pins_c: usart3-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usbotg_hs_pins_a: usbotg-hs-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
+ };
+ };
+
+ usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
+ <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
+ };
+ };
+};
+
+&pinctrl_z {
+ i2c4_pins_a: i2c4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+};
diff --git a/fdts/stm32mp151.dtsi b/fdts/stm32mp151.dtsi
new file mode 100644
index 0000000..a938edc
--- /dev/null
+++ b/fdts/stm32mp151.dtsi
@@ -0,0 +1,689 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2017-2022, STMicroelectronics - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ nvmem-cells = <&part_number_otp>;
+ nvmem-cell-names = "part_number";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timers12: timer@40006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40006000 0x400>;
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+
+ usart2: serial@4000e000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000e000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ status = "disabled";
+ };
+
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ resets = <&rcc USART3_R>;
+ status = "disabled";
+ };
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART4_K>;
+ resets = <&rcc UART4_R>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ resets = <&rcc UART5_R>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40013000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40013000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <&exti 22 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ resets = <&rcc UART7_R>;
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ resets = <&rcc UART8_R>;
+ status = "disabled";
+ };
+
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ resets = <&rcc USART6_R>;
+ status = "disabled";
+ };
+
+ timers15: timer@44006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44006000 0x400>;
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+
+ usbotg_hs: usb-otg@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x10000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts-extended = <&exti 44 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ usb33d-supply = <&usb33>;
+ status = "disabled";
+ };
+
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ secure-interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ secure-interrupt-names = "wakeup";
+ };
+
+ pwr_regulators: pwr@50001000 {
+ compatible = "st,stm32mp1,pwr-reg";
+ reg = <0x50001000 0x10>;
+ st,tzcr = <&rcc 0x0 0x1>;
+
+ reg11: reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ reg18: reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ usb33: usb33 {
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ pwr_mcu: pwr_mcu@50001014 {
+ compatible = "st,stm32mp151-pwr-mcu", "syscon";
+ reg = <0x50001014 0x4>;
+ };
+
+ pwr_irq: pwr@50001020 {
+ compatible = "st,stm32mp1-pwr";
+ reg = <0x50001020 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+
+ /* exti_pwr is an extra interrupt controller used for
+ * EXTI 55 to 60. It's mapped on pwr interrupt
+ * controller.
+ */
+ exti_pwr: exti-pwr {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pwr_irq>;
+ st,irq-number = <6>;
+ };
+ };
+
+ syscfg: syscon@50020000 {
+ compatible = "st,stm32mp157-syscfg", "syscon";
+ reg = <0x50020000 0x400>;
+ clocks = <&rcc SYSCFG>;
+ };
+
+ hash1: hash@54002000 {
+ compatible = "st,stm32f756-hash";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ status = "disabled";
+ };
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ status = "disabled";
+ };
+
+ fmc: memory-controller@58002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+
+ nand-controller@4,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ iwdg2: watchdog@5a002000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5a002000 0x400>;
+ secure-interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ ddr: ddr@5a003000 {
+ compatible = "st,stm32mp1-ddr";
+ reg = <0x5A003000 0x550 0x5A004000 0x234>;
+ clocks = <&rcc AXIDCG>,
+ <&rcc DDRC1>,
+ <&rcc DDRC2>,
+ <&rcc DDRPHYC>,
+ <&rcc DDRCAPB>,
+ <&rcc DDRPHYCAPB>;
+ clock-names = "axidcg",
+ "ddrc1",
+ "ddrc2",
+ "ddrphyc",
+ "ddrcapb",
+ "ddrphycapb";
+ status = "okay";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+
+ usart1: serial@5c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x5c000000 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ status = "disabled";
+ };
+
+ spi6: spi@5c001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x5c001000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI6_K>;
+ resets = <&rcc SPI6_R>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x5c002000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts-extended = <&exti 24 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ iwdg1: watchdog@5c003000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5C003000 0x400>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc IWDG1>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ rtc: rtc@5c004000 {
+ compatible = "st,stm32mp1-rtc";
+ reg = <0x5c004000 0x400>;
+ clocks = <&rcc RTCAPB>, <&rcc RTC>;
+ clock-names = "pclk", "rtc_ck";
+ interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ bsec: efuse@5c005000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cfg0_otp: cfg0_otp@0 {
+ reg = <0x0 0x1>;
+ };
+ part_number_otp: part_number_otp@4 {
+ reg = <0x4 0x1>;
+ };
+ monotonic_otp: monotonic_otp@10 {
+ reg = <0x10 0x4>;
+ };
+ nand_otp: nand_otp@24 {
+ reg = <0x24 0x4>;
+ };
+ uid_otp: uid_otp@34 {
+ reg = <0x34 0xc>;
+ };
+ package_otp: package_otp@40 {
+ reg = <0x40 0x4>;
+ };
+ hw2_otp: hw2_otp@48 {
+ reg = <0x48 0x4>;
+ };
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ pkh_otp: pkh_otp@60 {
+ reg = <0x60 0x20>;
+ };
+ mac_addr: mac_addr@e4 {
+ reg = <0xe4 0x8>;
+ st,non-secure-otp;
+ };
+ };
+
+ etzpc: etzpc@5c007000 {
+ compatible = "st,stm32-etzpc";
+ reg = <0x5C007000 0x400>;
+ clocks = <&rcc TZPC>;
+ };
+
+ stgen: stgen@5c008000 {
+ compatible = "st,stm32-stgen";
+ reg = <0x5C008000 0x1000>;
+ };
+
+ i2c6: i2c@5c009000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x5c009000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts-extended = <&exti 54 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C6_K>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x20>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ tamp: tamp@5c00a000 {
+ compatible = "st,stm32-tamp", "simple-bus", "syscon", "simple-mfd";
+ reg = <0x5c00a000 0x400>;
+ secure-interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc RTCAPB>;
+ };
+
+ /*
+ * Break node order to solve dependency probe issue between
+ * pinctrl and exti.
+ */
+ pinctrl: pinctrl@50002000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA>;
+ st,bank-name = "GPIOA";
+ status = "disabled";
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOB>;
+ st,bank-name = "GPIOB";
+ status = "disabled";
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOC>;
+ st,bank-name = "GPIOC";
+ status = "disabled";
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&rcc GPIOD>;
+ st,bank-name = "GPIOD";
+ status = "disabled";
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&rcc GPIOE>;
+ st,bank-name = "GPIOE";
+ status = "disabled";
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&rcc GPIOF>;
+ st,bank-name = "GPIOF";
+ status = "disabled";
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&rcc GPIOG>;
+ st,bank-name = "GPIOG";
+ status = "disabled";
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&rcc GPIOH>;
+ st,bank-name = "GPIOH";
+ status = "disabled";
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&rcc GPIOI>;
+ st,bank-name = "GPIOI";
+ status = "disabled";
+ };
+
+ gpioj: gpio@5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&rcc GPIOJ>;
+ st,bank-name = "GPIOJ";
+ status = "disabled";
+ };
+
+ gpiok: gpio@5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&rcc GPIOK>;
+ st,bank-name = "GPIOK";
+ status = "disabled";
+ };
+ };
+
+ pinctrl_z: pinctrl@54004000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+
+ gpioz: gpio@54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&rcc GPIOZ>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/fdts/stm32mp153.dtsi b/fdts/stm32mp153.dtsi
new file mode 100644
index 0000000..0a0bb8d
--- /dev/null
+++ b/fdts/stm32mp153.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+ cpus {
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&rcc CK_MPU>;
+ clock-names = "cpu";
+ };
+ };
+};
diff --git a/fdts/stm32mp157.dtsi b/fdts/stm32mp157.dtsi
new file mode 100644
index 0000000..c834029
--- /dev/null
+++ b/fdts/stm32mp157.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
diff --git a/fdts/stm32mp157a-avenger96-fw-config.dts b/fdts/stm32mp157a-avenger96-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157a-avenger96-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157a-avenger96.dts b/fdts/stm32mp157a-avenger96.dts
new file mode 100644
index 0000000..f0da350
--- /dev/null
+++ b/fdts/stm32mp157a-avenger96.dts
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Arrow Electronics 2019 - All Rights Reserved
+ * Author: Botond Kardos <botond.kardos@arroweurope.com>
+ *
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
+
+/ {
+ model = "Arrow Electronics STM32MP157A Avenger96 board";
+ compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
+
+ aliases {
+ mmc0 = &sdmmc1;
+ serial0 = &uart4;
+ serial1 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x40000000>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ st,main-control-register = <0x04>;
+ st,vin-control-register = <0xc0>;
+ st,usb-control-register = <0x30>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ st,regulator-sink-source;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = <2 80 0 0 0 PQR(1,0,0)>;
+ frac = <0x800>;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <1 39 3 11 4 PQR(1,1,1)>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&uart4 {
+ /* On Low speed expansion header */
+ label = "LS-UART1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ /* On Low speed expansion header */
+ label = "LS-UART0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
diff --git a/fdts/stm32mp157a-dhcor-avenger96-fw-config.dts b/fdts/stm32mp157a-dhcor-avenger96-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157a-dhcor-avenger96-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157a-dhcor-avenger96.dts b/fdts/stm32mp157a-dhcor-avenger96.dts
new file mode 100644
index 0000000..82d48aa
--- /dev/null
+++ b/fdts/stm32mp157a-dhcor-avenger96.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ *
+ * DHCOR STM32MP1 variant:
+ * DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG
+ * DHCOR PCB number: 586-100 or newer
+ * Avenger96 PCB number: 588-200 or newer
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-avenger96.dtsi"
+
+/ {
+ model = "Arrow Electronics STM32MP157A Avenger96 board";
+ compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",
+ "st,stm32mp157";
+};
diff --git a/fdts/stm32mp157a-dk1-fw-config.dts b/fdts/stm32mp157a-dk1-fw-config.dts
new file mode 100644
index 0000000..83116d1
--- /dev/null
+++ b/fdts/stm32mp157a-dk1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x20000000 /* 512MB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157a-dk1.dts b/fdts/stm32mp157a-dk1.dts
new file mode 100644
index 0000000..a73bef8
--- /dev/null
+++ b/fdts/stm32mp157a-dk1.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
+ compatible = "st,stm32mp157a-dk1", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ serial2 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
diff --git a/fdts/stm32mp157a-ed1-fw-config.dts b/fdts/stm32mp157a-ed1-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157a-ed1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157a-ev1-fw-config.dts b/fdts/stm32mp157a-ev1-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157a-ev1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157c-dhcom-pdk2-fw-config.dts b/fdts/stm32mp157c-dhcom-pdk2-fw-config.dts
new file mode 100644
index 0000000..6a5a192
--- /dev/null
+++ b/fdts/stm32mp157c-dhcom-pdk2-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+/*
+ * Copyright (c) 2022 DH electronics GmbH
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157c-dhcom-pdk2.dts b/fdts/stm32mp157c-dhcom-pdk2.dts
new file mode 100644
index 0000000..370a69a
--- /dev/null
+++ b/fdts/stm32mp157c-dhcom-pdk2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+/*
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ *
+ * DHCOM STM32MP1 variant:
+ * DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2
+ * DHCOM PCB number: 587-200 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcom-som.dtsi"
+#include "stm32mp15xx-dhcom-pdk2.dtsi"
+
+/ {
+ model = "DH electronics STM32MP157C DHCOM Premium Developer Kit (2)";
+ compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som",
+ "st,stm32mp157";
+};
+
+&cryp1 {
+ status = "okay";
+};
diff --git a/fdts/stm32mp157c-dk2-fw-config.dts b/fdts/stm32mp157c-dk2-fw-config.dts
new file mode 100644
index 0000000..83116d1
--- /dev/null
+++ b/fdts/stm32mp157c-dk2-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x20000000 /* 512MB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157c-dk2.dts b/fdts/stm32mp157c-dk2.dts
new file mode 100644
index 0000000..be8300e
--- /dev/null
+++ b/fdts/stm32mp157c-dk2.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
+ compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ serial2 = &uart7;
+ serial3 = &usart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cryp1 {
+ status = "okay";
+};
diff --git a/fdts/stm32mp157c-ed1-fw-config.dts b/fdts/stm32mp157c-ed1-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157c-ed1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157c-ed1.dts b/fdts/stm32mp157c-ed1.dts
new file mode 100644
index 0000000..d928563
--- /dev/null
+++ b/fdts/stm32mp157c-ed1.dts
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2017-2022, STMicroelectronics - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter";
+ compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xC0000000 0x40000000>;
+ };
+
+ aliases {
+ serial0 = &uart4;
+ };
+};
+
+&bsec {
+ board_id: board_id@ec {
+ reg = <0xec 0x4>;
+ st,non-secure-otp;
+ };
+};
+
+&clk_hse {
+ st,digbypass;
+};
+
+&cpu0 {
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcore>;
+};
+
+&cryp1 {
+ status = "okay";
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ st,regulator-sink-source;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ power-off-time-sec = <10>;
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_PLL4P
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = <2 80 0 0 0 PQR(1,0,0)>;
+ frac = <0x800>;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <3 98 5 7 7 PQR(1,1,1)>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ disable-wp;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd>;
+ mmc-ddr-3_3v;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/fdts/stm32mp157c-ev1-fw-config.dts b/fdts/stm32mp157c-ev1-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157c-ev1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157c-ev1.dts b/fdts/stm32mp157c-ev1.dts
new file mode 100644
index 0000000..02840a2
--- /dev/null
+++ b/fdts/stm32mp157c-ev1.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2017-2021, STMicroelectronics - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
+ compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial1 = &usart3;
+ };
+};
+
+&fmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fmc_pins_a>;
+ status = "okay";
+
+ nand-controller@4,0 {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: mx66l51235l@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins_b>;
+ uart-has-rtscts;
+ status = "disabled";
+};
diff --git a/fdts/stm32mp157c-lxa-mc1-fw-config.dts b/fdts/stm32mp157c-lxa-mc1-fw-config.dts
new file mode 100644
index 0000000..9ee09e9
--- /dev/null
+++ b/fdts/stm32mp157c-lxa-mc1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x20000000 /* 512MB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157c-lxa-mc1.dts b/fdts/stm32mp157c-lxa-mc1.dts
new file mode 100644
index 0000000..6f67712
--- /dev/null
+++ b/fdts/stm32mp157c-lxa-mc1.dts
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+/ {
+ model = "Linux Automation MC-1 board";
+ compatible = "lxa,stm32mp157c-mc1", "oct,stm32mp15xx-osd32", "st,stm32mp157";
+
+ aliases {
+ mmc0 = &sdmmc1;
+ mmc1 = &sdmmc2;
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ led-act {
+ compatible = "gpio-leds";
+
+ led-green {
+ label = "mc1:green:act";
+ gpios = <&gpioa 13 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_3v3: regulator_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&v3v3>;
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ bus-width = <4>;
+ cd-gpios = <&gpioh 3 1>;
+ disable-wp;
+ no-1-8-v;
+ st,neg-edge;
+ vmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
+
+&sdmmc1_b4_pins_a {
+ /*
+ * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
+ * work, thus enable internal pull-ups.
+ */
+ pins1 {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+ };
+ pins2 {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+ };
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
+ bus-width = <8>;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ st,neg-edge;
+ vmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/fdts/stm32mp157c-odyssey-fw-config.dts b/fdts/stm32mp157c-odyssey-fw-config.dts
new file mode 100644
index 0000000..9ee09e9
--- /dev/null
+++ b/fdts/stm32mp157c-odyssey-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x20000000 /* 512MB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157c-odyssey-som.dtsi b/fdts/stm32mp157c-odyssey-som.dtsi
new file mode 100644
index 0000000..091e327
--- /dev/null
+++ b/fdts/stm32mp157c-odyssey-som.dtsi
@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) 2019, STMicroelectronics. All Rights Reserved.
+ * Copyright (C) 2021, Grzegorz Szymaszek.
+ *
+ * SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+ */
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+
+/ {
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&bsec {
+ board_id: board_id@ec {
+ reg = <0xec 0x4>;
+ st,non-secure-otp;
+ };
+};
+
+&clk_hse {
+ st,digbypass;
+};
+
+&cpu0 {
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcore>;
+};
+
+&cryp1 {
+ status = "okay";
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&vin>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo4-supply = <&vin>;
+ ldo5-supply = <&vin>;
+ ldo6-supply = <&v3v3>;
+ vref_ddr-supply = <&vin>;
+ boost-supply = <&vin>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ st,regulator-sink-source;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+
+ pmic_watchdog: watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_PLL4P
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = <2 80 0 0 0 PQR(1,0,0)>;
+ frac = <0x800>;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <3 98 5 7 7 PQR(1,1,1)>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd>;
+ mmc-ddr-3_3v;
+ status = "okay";
+};
diff --git a/fdts/stm32mp157c-odyssey.dts b/fdts/stm32mp157c-odyssey.dts
new file mode 100644
index 0000000..03800f9
--- /dev/null
+++ b/fdts/stm32mp157c-odyssey.dts
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2019, STMicroelectronics. All Rights Reserved.
+ * Copyright (C) 2021, Grzegorz Szymaszek.
+ *
+ * SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-odyssey-som.dtsi"
+
+/ {
+ model = "Seeed Studio Odyssey-STM32MP157C Board";
+ compatible = "seeed,stm32mp157c-odyssey",
+ "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/fdts/stm32mp157d-dk1-fw-config.dts b/fdts/stm32mp157d-dk1-fw-config.dts
new file mode 100644
index 0000000..83116d1
--- /dev/null
+++ b/fdts/stm32mp157d-dk1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x20000000 /* 512MB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157d-ed1-fw-config.dts b/fdts/stm32mp157d-ed1-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157d-ed1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157d-ev1-fw-config.dts b/fdts/stm32mp157d-ev1-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157d-ev1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157f-dk2-fw-config.dts b/fdts/stm32mp157f-dk2-fw-config.dts
new file mode 100644
index 0000000..83116d1
--- /dev/null
+++ b/fdts/stm32mp157f-dk2-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x20000000 /* 512MB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157f-ed1-fw-config.dts b/fdts/stm32mp157f-ed1-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157f-ed1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157f-ev1-fw-config.dts b/fdts/stm32mp157f-ev1-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157f-ev1-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp15xc.dtsi b/fdts/stm32mp15xc.dtsi
new file mode 100644
index 0000000..b06a55a
--- /dev/null
+++ b/fdts/stm32mp15xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/ {
+ soc {
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/fdts/stm32mp15xx-dhcom-pdk2.dtsi b/fdts/stm32mp15xx-dhcom-pdk2.dtsi
new file mode 100644
index 0000000..1ffc60d
--- /dev/null
+++ b/fdts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+/*
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ */
+
+/ {
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins_a>;
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "otg";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phy-names = "usb2-phy";
+ phys = <&usbphyc_port1 0>;
+ vbus-supply = <&vbus_otg>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
diff --git a/fdts/stm32mp15xx-dhcom-som.dtsi b/fdts/stm32mp15xx-dhcom-som.dtsi
new file mode 100644
index 0000000..c9f21b0
--- /dev/null
+++ b/fdts/stm32mp15xx-dhcom-som.dtsi
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+/*
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi"
+
+/ {
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xC0000000 0x40000000>;
+ };
+};
+
+&bsec {
+ board_id: board_id@ec {
+ reg = <0xec 0x4>;
+ st,non-secure-otp;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcore>;
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ st,regulator-sink-source;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_PLL4P
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 1 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_PLL4P
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = <2 80 0 0 0 PQR(1,0,0)>;
+ frac = <0x800>;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 600.0 MHz => P = 50, Q = 50, R = 50 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <1 49 5 11 11 PQR(1,1,1)>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ disable-wp;
+ st,sig-dir;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&sdmmc1_b4_pins_a {
+ /*
+ * SD bus pull-up resistors:
+ * - optional on SoMs with SD voltage translator
+ * - mandatory on SoMs without SD voltage translator
+ */
+ pins1 {
+ bias-pull-up;
+ };
+ pins2 {
+ bias-pull-up;
+ };
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&v3v3>;
+ mmc-ddr-3_3v;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/fdts/stm32mp15xx-dhcor-avenger96.dtsi b/fdts/stm32mp15xx-dhcor-avenger96.dtsi
new file mode 100644
index 0000000..576e0f1
--- /dev/null
+++ b/fdts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ */
+
+/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */
+#include "stm32mp15xx-dhcor-io1v8.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart4;
+ serial1 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ sd_switch: regulator-sd_switch {
+ compatible = "regulator-gpio";
+ regulator-name = "sd_switch";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-type = "voltage";
+ regulator-always-on;
+
+ gpios = <&gpioi 5 0>;
+ gpios-states = <0>;
+ states = <1800000 0x1>,
+ <2900000 0x0>;
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+ disable-wp;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ vqmmc-supply = <&sd_switch>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ st,neg-edge;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd_io>;
+ status = "okay";
+};
+
+&uart4 {
+ /* On Low speed expansion header */
+ label = "LS-UART1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ /* On Low speed expansion header */
+ label = "LS-UART0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg_hs {
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phy-names = "usb2-phy";
+ phys = <&usbphyc_port1 0>;
+ status = "okay";
+ vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
diff --git a/fdts/stm32mp15xx-dhcor-io1v8.dtsi b/fdts/stm32mp15xx-dhcor-io1v8.dtsi
new file mode 100644
index 0000000..9937b28
--- /dev/null
+++ b/fdts/stm32mp15xx-dhcor-io1v8.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+ /* Enpirion EP3A8LQI U2 on the DHCOR */
+ vdd_io: regulator-buck-io {
+ compatible = "regulator-fixed";
+ regulator-name = "buck-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd>;
+ };
+};
+
+&vdd {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd_io>;
+};
diff --git a/fdts/stm32mp15xx-dhcor-som.dtsi b/fdts/stm32mp15xx-dhcor-som.dtsi
new file mode 100644
index 0000000..c241efc
--- /dev/null
+++ b/fdts/stm32mp15xx-dhcor-som.dtsi
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi"
+
+/ {
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x40000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcore>;
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ st,regulator-sink-source;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <300000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ regulator-active-discharge = <1>;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = <2 80 0 0 0 PQR(1,0,0)>;
+ frac = <0x800>;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 600.0 MHz => P = 99, Q = 74, R = 99 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <3 98 5 7 5 PQR(1,1,1)>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
diff --git a/fdts/stm32mp15xx-dkx.dtsi b/fdts/stm32mp15xx-dkx.dtsi
new file mode 100644
index 0000000..52d4170
--- /dev/null
+++ b/fdts/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2022, STMicroelectronics - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+
+/ {
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&bsec {
+ board_id: board_id@ec {
+ reg = <0xec 0x4>;
+ st,non-secure-otp;
+ };
+};
+
+&clk_hse {
+ st,digbypass;
+};
+
+&cpu0 {
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcore>;
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&vin>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo4-supply = <&vin>;
+ ldo5-supply = <&vin>;
+ ldo6-supply = <&v3v3>;
+ vref_ddr-supply = <&vin>;
+ boost-supply = <&vin>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ st,regulator-sink-source;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_PLL4P
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+ frac = < 0x800 >;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <3 98 5 7 7 PQR(1,1,1)>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_c>;
+ status = "disabled";
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins_c>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+&usbotg_hs {
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ usb-role-switch;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
diff --git a/fdts/stm32mp15xx-osd32.dtsi b/fdts/stm32mp15xx-osd32.dtsi
new file mode 100644
index 0000000..52a5d38
--- /dev/null
+++ b/fdts/stm32mp15xx-osd32.dtsi
@@ -0,0 +1,278 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ st,regulator-sink-source;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ regulator-active-discharge;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge;
+ };
+ };
+
+ pmic_watchdog: watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+/* ATF Specific */
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+
+/ {
+ aliases {
+ gpio0 = &gpioa;
+ gpio1 = &gpiob;
+ gpio2 = &gpioc;
+ gpio3 = &gpiod;
+ gpio4 = &gpioe;
+ gpio5 = &gpiof;
+ gpio6 = &gpiog;
+ gpio7 = &gpioh;
+ gpio8 = &gpioi;
+ gpio25 = &gpioz;
+ i2c3 = &i2c4;
+ };
+};
+
+&bsec {
+ board_id: board_id@ec {
+ reg = <0xec 0x4>;
+ st,non-secure-otp;
+ };
+};
+
+&clk_hse {
+ st,digbypass;
+};
+
+&cpu0 {
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcore>;
+};
+
+&hash1 {
+ status = "okay";
+};
+
+/* CLOCK init */
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_PLL4P
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+ frac = < 0x800 >;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <3 98 5 7 7 PQR(1,1,1)>;
+ };
+};
diff --git a/fdts/stm32mp15xxaa-pinctrl.dtsi b/fdts/stm32mp15xxaa-pinctrl.dtsi
new file mode 100644
index 0000000..f1d540a
--- /dev/null
+++ b/fdts/stm32mp15xxaa-pinctrl.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+};
+
+&pinctrl_z {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+};
diff --git a/fdts/stm32mp15xxab-pinctrl.dtsi b/fdts/stm32mp15xxab-pinctrl.dtsi
new file mode 100644
index 0000000..b58c7e2
--- /dev/null
+++ b/fdts/stm32mp15xxab-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AB>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+};
diff --git a/fdts/stm32mp15xxac-pinctrl.dtsi b/fdts/stm32mp15xxac-pinctrl.dtsi
new file mode 100644
index 0000000..11e7e03
--- /dev/null
+++ b/fdts/stm32mp15xxac-pinctrl.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <12>;
+ gpio-ranges = <&pinctrl 0 128 12>;
+ };
+};
+
+&pinctrl_z {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+};
diff --git a/fdts/stm32mp15xxad-pinctrl.dtsi b/fdts/stm32mp15xxad-pinctrl.dtsi
new file mode 100644
index 0000000..52806d6
--- /dev/null
+++ b/fdts/stm32mp15xxad-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AD>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+};
diff --git a/fdts/tc.dts b/fdts/tc.dts
new file mode 100644
index 0000000..5a8792e
--- /dev/null
+++ b/fdts/tc.dts
@@ -0,0 +1,567 @@
+/*
+ * Copyright (c) 2020-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "arm,tc";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ core4 {
+ cpu = <&CPU4>;
+ };
+ core5 {
+ cpu = <&CPU5>;
+ };
+ core6 {
+ cpu = <&CPU6>;
+ };
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ /*
+ * The timings below are just to demonstrate working cpuidle.
+ * These values may be inaccurate.
+ */
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2000>;
+ };
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ local-timer-stop;
+ entry-latency-us = <400>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2500>;
+ };
+ };
+
+ amus {
+ amu: amu-0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mpmm_gear0: counter@0 {
+ reg = <0>;
+
+ enable-at-el3;
+ };
+
+ mpmm_gear1: counter@1 {
+ reg = <1>;
+
+ enable-at-el3;
+ };
+
+ mpmm_gear2: counter@2 {
+ reg = <2>;
+
+ enable-at-el3;
+ };
+ };
+ };
+
+ CPU0:cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0>;
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <406>;
+ amu = <&amu>;
+ supports-mpmm;
+ };
+
+ CPU1:cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <406>;
+ amu = <&amu>;
+ supports-mpmm;
+ };
+
+ CPU2:cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x200>;
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <406>;
+ amu = <&amu>;
+ supports-mpmm;
+ };
+
+ CPU3:cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x300>;
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <406>;
+ amu = <&amu>;
+ supports-mpmm;
+ };
+
+ CPU4:cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x400>;
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <912>;
+ amu = <&amu>;
+ supports-mpmm;
+ };
+
+ CPU5:cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x500>;
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <912>;
+ amu = <&amu>;
+ supports-mpmm;
+ };
+
+ CPU6:cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x600>;
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <912>;
+ amu = <&amu>;
+ supports-mpmm;
+ };
+
+ CPU7:cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x700>;
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 2>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ amu = <&amu>;
+ supports-mpmm;
+ };
+
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x8000000>;
+ linux,cma-default;
+ };
+
+ optee@0xfce00000 {
+ reg = <0x00000000 0xfce00000 0 0x00200000>;
+ no-map;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ sram: sram@6000000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x06000000 0x0 0x8000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x06000000 0x8000>;
+
+ cpu_scp_scmi_mem: scp-shmem@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x80>;
+ };
+ };
+
+ mbox_db_rx: mhu@45010000 {
+ compatible = "arm,mhuv2-rx","arm,primecell";
+ reg = <0x0 0x45010000 0x0 0x1000>;
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "apb_pclk";
+ #mbox-cells = <2>;
+ interrupts = <0 317 4>;
+ interrupt-names = "mhu_rx";
+ mhu-protocol = "doorbell";
+ arm,mhuv2-protocols = <0 1>;
+ };
+
+ mbox_db_tx: mhu@45000000 {
+ compatible = "arm,mhuv2-tx","arm,primecell";
+ reg = <0x0 0x45000000 0x0 0x1000>;
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "apb_pclk";
+ #mbox-cells = <2>;
+ interrupt-names = "mhu_tx";
+ mhu-protocol = "doorbell";
+ arm,mhuv2-protocols = <0 1>;
+ };
+
+ cmn-pmu {
+ compatible = "arm,ci-700";
+ reg = <0x0 0x50000000 0x0 0x10000000>;
+ interrupts = <0x0 460 0x4>;
+ };
+
+ scmi {
+ compatible = "arm,scmi";
+ mbox-names = "tx", "rx";
+ mboxes = <&mbox_db_tx 0 0 &mbox_db_rx 0 0 >;
+ shmem = <&cpu_scp_scmi_mem &cpu_scp_scmi_mem>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_dvfs: protocol@13 {
+ reg = <0x13>;
+ #clock-cells = <1>;
+ };
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-600", "arm,gic-v3";
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ reg = <0x0 0x30000000 0 0x10000>, /* GICD */
+ <0x0 0x30080000 0 0x200000>; /* GICR */
+ interrupts = <0x1 0x9 0x4>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <0x1 13 0x8>,
+ <0x1 14 0x8>,
+ <0x1 11 0x8>,
+ <0x1 10 0x8>;
+ };
+
+ soc_refclk100mhz: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ soc_refclk60mhz: refclk60mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <60000000>;
+ clock-output-names = "iofpga_clk";
+ };
+
+ soc_uartclk: uartclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "uartclk";
+ };
+
+ soc_uart0: uart@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <0x0 116 0x4>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "okay";
+ };
+
+ rtc0: rtc@1C170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x0 0x1C170000 0x0 0x1000>;
+ interrupts = <0x0 100 0x4>;
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "apb_pclk";
+ wakeup-source;
+ };
+
+ vencoder {
+ compatible = "drm,virtual-encoder";
+
+ port {
+ vencoder_in: endpoint {
+ remote-endpoint = <&dp_pl0_out0>;
+ };
+ };
+
+ display-timings {
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ vactive = <480>;
+ hfront-porch = <16>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ vfront-porch = <10>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ };
+ };
+
+ };
+
+ hdlcd: hdlcd@7ff60000 {
+ compatible = "arm,hdlcd";
+ reg = <0x0 0x7ff60000 0x0 0x1000>;
+ interrupts = <0x0 117 0x4>;
+ clocks = <&fake_hdlcd_clk>;
+ clock-names = "pxlclk";
+ status = "disabled";
+
+ port {
+ hdlcd_out: endpoint {
+ remote-endpoint = <&vencoder_in>;
+ };
+ };
+ };
+
+ fake_hdlcd_clk: fake-hdlcd-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25175000>;
+ clock-output-names = "pxlclk";
+ };
+
+ ethernet@18000000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x0 0x18000000 0x0 0x10000>;
+ interrupts = <0 109 4>;
+ };
+
+ kmi@1c060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x0 0x001c060000 0x0 0x1000>;
+ interrupts = <0 197 4>;
+ clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi@1c070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x0 0x001c070000 0x0 0x1000>;
+ interrupts = <0 103 4>;
+ clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ bp_clock24mhz: clock24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "bp:clock24mhz";
+ };
+
+ virtio_block@1c130000 {
+ compatible = "virtio,mmio";
+ reg = <0x0 0x1c130000 0x0 0x200>;
+ interrupts = <0 204 4>;
+ };
+
+ sysreg: sysreg@1c010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x0 0x001c010000 0x0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ fixed_3v3: v2m-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmci@1c050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x0 0x001c050000 0x0 0x1000>;
+ interrupts = <0 107 0x4>,
+ <0 108 0x4>;
+ cd-gpios = <&sysreg 0 0>;
+ wp-gpios = <&sysreg 1 0>;
+ bus-width = <8>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&fixed_3v3>;
+ clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ gpu: gpu@2d000000 {
+ compatible = "arm,mali-midgard";
+ reg = <0x0 0x2d000000 0x0 0x200000>;
+ interrupts = <0 66 4>, <0 67 4>, <0 65 4>;
+ interrupt-names = "JOB", "MMU", "GPU";
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "clk_mali";
+ operating-points = <
+ /* KHz uV */
+ 50000 820000
+ >;
+ };
+
+ smmu: smmu@2ce00000 {
+ #iommu-cells = <1>;
+ compatible = "arm,smmu-v3";
+ reg = <0x0 0x2ce00000 0x0 0x20000>;
+ status = "okay";
+ };
+
+ dp0: display@2cc00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,mali-d71";
+ reg = <0 0x2cc00000 0 0x20000>;
+ interrupts = <0 69 4>;
+ interrupt-names = "DPU";
+ clocks = <&scmi_clk 0>;
+ clock-names = "aclk";
+ iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+ <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+ <&smmu 8>, <&smmu 9>;
+ pl0: pipeline@0 {
+ reg = <0>;
+ clocks = <&scmi_clk 1>;
+ clock-names = "pxclk";
+ pl_id = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_pl0_out0: endpoint {
+ remote-endpoint = <&vencoder_in>;
+ };
+ };
+ };
+ };
+
+ pl1: pipeline@1 {
+ reg = <1>;
+ clocks = <&scmi_clk 2>;
+ clock-names = "pxclk";
+ pl_id = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+ };
+ };
+ };
+
+ ete0 {
+ compatible = "arm,embedded-trace-extension";
+ cpu = <&CPU0>;
+ };
+
+ ete1 {
+ compatible = "arm,embedded-trace-extension";
+ cpu = <&CPU1>;
+ };
+
+ ete2 {
+ compatible = "arm,embedded-trace-extension";
+ cpu = <&CPU2>;
+ };
+
+ ete3 {
+ compatible = "arm,embedded-trace-extension";
+ cpu = <&CPU3>;
+ };
+
+ ete4 {
+ compatible = "arm,embedded-trace-extension";
+ cpu = <&CPU4>;
+ };
+
+ ete5 {
+ compatible = "arm,embedded-trace-extension";
+ cpu = <&CPU5>;
+ };
+
+ ete6 {
+ compatible = "arm,embedded-trace-extension";
+ cpu = <&CPU6>;
+ };
+
+ ete7 {
+ compatible = "arm,embedded-trace-extension";
+ cpu = <&CPU7>;
+ };
+
+ trbe0 {
+ compatible = "arm,trace-buffer-extension";
+ interrupts = <1 2 4>;
+ };
+};